1 ###| CMAKE Kiibohd Controller |###
3 # Jacob Alexander 2011-2013
4 # Due to this file's usefulness:
6 # Released into the Public Domain
8 # avr-gcc CMake Build Configuration
14 #| Set the Compilers (must be set first)
15 include( CMakeForceCompiler )
16 cmake_force_c_compiler ( avr-gcc AVRCCompiler )
17 cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler )
21 set( OBJCOPY "avr-objcopy" )
22 set( OBJDUMP "avr-objdump" )
24 set( SIZE "avr-size" )
29 # Atmel Defines and Linker Options
33 #| You _MUST_ set this to match the board you are using
34 #| type "make clean" after changing this, so all files will be rebuilt
36 #| "at90usb162" # Teensy 1.0
37 #| "atmega32u4" # Teensy 2.0
38 #| "at90usb646" # Teensy++ 1.0
39 #| "at90usb1286" # Teensy++ 2.0
40 #set( MCU "atmega32u4" )
41 set( MCU "at90usb1286" )
44 #| Extra Compiler Sources
45 #| Mostly for convenience functions like interrupt handlers
47 # XXX Not needed for avr-gcc
51 #| Compiler flag to set the C Standard level.
53 #| gnu89 = c89 plus GCC extensions
54 #| c99 = ISO C99 standard (not yet fully implemented)
55 #| gnu99 = c99 plus GCC extensions
56 set( CSTANDARD "-std=gnu99" )
60 #| -Wall...: warning level
61 set( WARN "-Wall -Wstrict-prototypes" )
65 #| -f...: tuning, see GCC manual and avr-libc documentation
66 set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" )
69 #| Optimization level, can be [0, 1, 2, 3, s].
70 #| 0 = turn off optimization. s = optimize for size.
71 #| (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
80 #| Processor frequency.
81 #| Normally the first thing your program should do is set the clock prescaler,
82 #| so your program will run at the correct speed. You should also set this
83 #| variable to same clock speed. The _delay_ms() macro uses this, and many
84 #| examples use this variable to calculate timings. Do not add a "UL" here.
85 set( F_CPU "16000000" )
89 #| Compiler flags to generate dependency files.
90 set( GENDEPFLAGS "-MMD -MP" )
94 add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" )
98 set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" )
101 #| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...)
102 set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature )
106 set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} )
110 set( LSS_FLAGS -h -S -z )