1 # Quantum Mechanical Keyboard Firmware
3 You have found the QMK Firmware documentation site. This is a keyboard firmware based on the [tmk_keyboard firmware](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
5 Understanding the essential changes made on the [tmk_keyboard firmware](http://github.com/tmk/tmk_keyboard) should help you understand the QMK Firmware.
8 |------------------------------|-----------------------|-------------------------|
9 | Maintainer |hasu (@tmk) |Jack Humbert et al. |
10 | Build path customization | `TMK_DIR = ...` | `include .../Makefile` |
11 | `keymaps` array data | 3D array of `uint8_t` holding **keycode** | 3D array of `uint16_t` holding **action code** |
12 | `fn_actions` array data | 1D array of `uint16_t` holding **action code** | 1D array of `uint16_t` holding **action code** |
16 Before you are able to compile, you'll need to install an environment for AVR development. You'll find the instructions for any OS below. If you find another/better way to set things up from scratch, please consider [making a pull request](https://github.com/qmk/qmk_firmware/pulls) with your changes!
18 * [Build Environment Setup](Build-Environment-Setup)
19 * [QMK Overview](QMK-Overview)
21 # Configuring QMK Firmware
23 The QMK Firmware can be configured via the `keymaps` array data.
25 For simply generating a [basic keycode](https://github.com/qmk/qmk_firmware/wiki/Keycodes), you add it as an element of your `keymaps` array data.
27 For more complicated actions, you add the corresponding **action code** directly as an element of your `keymaps` array data.
29 The **action code** is a 16 bit data and organized carefully to represent common operations with the combination of C macros. It is sometimes called quantum keycode in the QMK source comment.
31 For example, the keycode `KC_8` as an element of your `keymaps` array data is for generating keystroke of "8". The action code `SHFT(KC_8)` an element of your `keymaps` array data is for generating key stroke of "*" which is "8" key shifted.
33 Please note only up to 32 **action codes** were usable in `fn_actions` array data and accessed via special keycodes (`KC_FN0` to `KC_FN31`) in `keymaps` array data in tmk.
35 For more details of the `keymaps` array, see [Keymap Overview](Keymap) page.
37 ## C macros for action code
39 Basic "C macros" for layer switching are documented in the [Key Functions](Key-Functions) page.
41 > The keyboard [macros](Macros) are completely different concept from the C macros for action code. Please don't get confused.
43 There are several new standardized support for common operations with new action codes as follows.
45 ## Space Cadet Shift: The future, built in
47 Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. Head on over to the [Space Cadet Shift](Space-Cadet-Shift) page to read about it.
49 ## The Leader key: A new kind of modifier
51 Most modifiers have to be held or toggled. But what if you had a key that indicated the start of a sequence? You could press that key and then rapidly press 1-3 more keys to trigger a macro, or enter a special layer, or anything else you might want to do. To learn more about it check out the [Leader Key](Leader-Key) page.
53 ## Tap Dance: A single key can do 3, 5, or 100 different things
55 Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. Read more about it on the [Tap Dance](Tap-Dance) page.
57 ## Temporarily setting the default layer
59 `DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does.
61 ## Macro shortcuts: Send a whole string when pressing just one key
63 How would you like a single keypress to send a whole word, sentence, paragraph, or even document? Head on over to the [Macros](Macros) page to read up on all aspects of Simple and Dynamic Macros.
65 ## Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc)
67 Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap:
69 #include <keymap_colemak.h>
71 If you use Dvorak, use `keymap_dvorak.h` instead of `keymap_colemak.h` for this line. After including this line, you will get access to:
73 * `CM_*` for all of the Colemak-equivalent characters
74 * `DV_*` for all of the Dvorak-equivalent characters
76 These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features.
78 To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`.
80 ## Backlight Breathing
82 In order to enable backlight breathing, the following line must be added to your config.h file.
84 #define BACKLIGHT_BREATHING
86 The following function calls are used to control the breathing effect.
88 * ```breathing_enable()``` - Enable the free-running breathing effect.
89 * ```breathing_disable()``` - Disable the free-running breathing effect immediately.
90 * ```breathing_self_disable()``` - Disable the free-running breathing effect after the current effect ends.
91 * ```breathing_toggle()``` - Toggle the free-running breathing effect.
92 * ```breathing_defaults()``` - Reset the speed and brightness settings of the breathing effect.
94 The following function calls are used to control the maximum brightness of the breathing effect.
96 * ```breathing_intensity_set(value)``` - Set the brightness of the breathing effect when it is at its max value.
97 * ```breathing_intensity_default()``` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity.
99 The following function calls are used to control the cycling speed of the breathing effect.
101 * ```breathing_speed_set(value)``` - Set the speed of the breathing effect - how fast it cycles.
102 * ```breathing_speed_inc(value)``` - Increase the speed of the breathing effect by a fixed value.
103 * ```breathing_speed_dec(value)``` - Decrease the speed of the breathing effect by a fixed value.
104 * ```breathing_speed_default()``` - Reset the speed of the breathing effect to the default value.
106 The following example shows how to enable the backlight breathing effect when the FUNCTION layer macro button is pressed:
109 if (record->event.pressed)
111 breathing_speed_set(3);
113 layer_on(LAYER_FUNCTION);
117 breathing_speed_set(1);
118 breathing_self_disable();
119 layer_off(LAYER_FUNCTION);
123 The following example shows how to pulse the backlight on-off-on when the RAISED layer macro button is pressed:
126 if (record->event.pressed)
128 layer_on(LAYER_RAISED);
129 breathing_speed_set(2);
131 update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST);
135 layer_off(LAYER_RAISED);
136 update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST);
140 ## Other firmware shortcut keycodes
142 * `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`)
143 * `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things
144 * `BL_ON` - turns the backlight on
145 * `BL_OFF` - turns the backlight off
146 * `BL_<n>` - sets the backlight to level *n*
147 * `BL_INC` - increments the backlight level by one
148 * `BL_DEC` - decrements the backlight level by one
149 * `BL_TOGG` - toggles the backlight
150 * `BL_STEP` - steps through the backlight levels
152 Enable the backlight from the Makefile.
154 # Custom Quantum functions
156 All of these functions are available in the `*_kb()` or `*_user()` variety. `kb` ones should only be used in the `<keyboard>/<keyboard>.c` file, and `user` ones should only be used in the `keymap.c`. The keyboard ones call the user ones - it's necessary to keep these calls to allow the keymap functions to work correctly.
158 ## `void matrix_init_*(void)`
160 This function gets called when the matrix is initiated, and can contain start-up code for your keyboard/keymap.
162 ## `void matrix_scan_*(void)`
164 This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
166 ## `bool process_record_*(uint16_t keycode, keyrecord_t *record)`
168 This function gets called on every keypress/release, and is where you can define custom functionality. The return value is whether or not QMK should continue processing the keycode - returning `false` stops the execution.
170 The `keycode` variable is whatever is defined in your keymap, eg `MO(1)`, `KC_L`, etc. and can be switch-cased to execute code whenever a particular code is pressed.
172 The `record` variable contains infomation about the actual press:
187 The conditional `if (record->event.pressed)` can tell if the key is being pressed or released, and you can execute code based on that.
189 ## `void led_set_*(uint8_t usb_led)`
191 This gets called whenever there is a state change on your host LEDs (eg caps lock, scroll lock, etc). The LEDs are defined as:
194 #define USB_LED_NUM_LOCK 0
195 #define USB_LED_CAPS_LOCK 1
196 #define USB_LED_SCROLL_LOCK 2
197 #define USB_LED_COMPOSE 3
198 #define USB_LED_KANA 4
201 and can be tested against the `usb_led` with a conditional like `if (usb_led & (1<<USB_LED_CAPS_LOCK))` - if this is true, you can turn your LED on, otherwise turn it off.