@subsection Setting up
@warning{These instructions assume that you are using the
-command-line version of Git 1.7 or higher.}
+command-line version of Git 1.5 or higher. Windows users should
+skip to @ref{Git on Windows}.}
@menu
* Installing Git::
@menu
* Organization of remote branches::
* LilyPond repository sources::
+* Downloading individual branches::
+* Downloading all remote branches::
* Other branches::
@end menu
only be used as a last resort.
+@node Downloading individual branches
+@unnumberedsubsubsec Downloading individual branches
+
+@warning{obsolete, should be deleted!}
+
+
+Once you have initialized an empty Git repository on your system
+(see @ref{Initializing a repository}), you can download a remote
+branch into it. Make sure you know which branch you want to start
+with.
+
+To download the @code{master} branch, enter the following:
+
+@example
+git remote add -ft master -m master \
+ origin git://git.sv.gnu.org/lilypond.git/
+@end example
+
+To download the @code{translation} branch, enter:
+
+@example
+git remote add -ft translation -m \
+ translation origin git://git.sv.gnu.org/lilypond.git/
+@end example
+
+The @command{git@tie{}remote@tie{}add} process could take up to
+ten minutes, depending on the speed of your connection. The
+output will be something like this:
+
+@example
+Updating origin
+remote: Counting objects: 235967, done.
+remote: Compressing objects: 100% (42721/42721), done.
+remote: Total 235967 (delta 195098), reused 233311 (delta 192772)
+Receiving objects: 100% (235967/235967), 68.37 MiB | 479 KiB/s, done.
+Resolving deltas: 100% (195098/195098), done.
+From git://git.sv.gnu.org/lilypond
+ * [new branch] master -> origin/master
+From git://git.sv.gnu.org/lilypond
+ * [new tag] flower/1.0.1 -> flower/1.0.1
+ * [new tag] flower/1.0.10 -> flower/1.0.10
+⋮
+ * [new tag] release/2.9.6 -> release/2.9.6
+ * [new tag] release/2.9.7 -> release/2.9.7
+@end example
+
+When @command{git@tie{}remote@tie{}add} is finished, the remote
+branch should be downloaded into your repository---though not yet
+in a form that you can use. In order to browse the source code
+files, you need to @emph{create} and @emph{checkout} your own
+local branch. In this case, however, it is easier to have Git
+create the branch automatically by using the @command{checkout}
+command on a non-existent branch. Enter the following:
+
+@example
+git checkout -b @var{branch} origin/@var{branch}
+@end example
+
+@noindent
+where @code{@var{branch}} is the name of your tracking branch,
+either @code{master} or @code{translation}.
+
+Git will issue some warnings; this is normal:
+
+@example
+warning: You appear to be on a branch yet to be born.
+warning: Forcing checkout of origin/master.
+Branch master set up to track remote branch master from origin.
+Already on 'master'
+@end example
+
+By now the source files should be accessible---you should be able
+to edit any files in the @file{$LILYPOND_GIT} directory using a
+text editor of your choice. But don't start just yet! Before
+editing any source files, learn how to keep your changes organized
+and prevent problems later---read @ref{Basic Git procedures}.
+
+@subsubheading Technical Details
+
+The @command{git@tie{}remote@tie{}add} command should add some
+lines to your local repository's @file{.git/config} file:
+
+@example
+[remote "origin"]
+ url = git://git.sv.gnu.org/lilypond.git/
+ fetch = +refs/heads/master:refs/remotes/origin/master
+@end example
+
+
+@node Downloading all remote branches
+@unnumberedsubsubsec Downloading all remote branches
+
+
+To download all remote branches at once, you can @command{clone}
+the entire repository:
+
+@example
+git clone git://git.sv.gnu.org/lilypond.git
+@end example
+
+
@node Other branches
@unnumberedsubsubsec Other branches
* Advanced Git concepts::
* Resolving conflicts::
* Reverting all local changes::
+* Working with remote branches::
* Git log::
* Applying remote patches::
* Sending and receiving patches via email::
referring to a branch, one often actually thinks about its head
and the ancestor commits of the head.
+Now we will explain the two last commands you used to get the
+source code from Git---see @ref{Downloading individual branches}.
+
+@example
+git remote add -ft @var{branch} -m @var{branch} \
+ origin git://git.sv.gnu.org/lilypond.git/
+
+git checkout -b @var{branch} origin/@var{branch}
+@end example
+
+The @command{git@tie{}remote} has created a branch called
+@code{origin/@var{branch}} in your local Git repository. As this
+branch is a copy of the remote branch web from git.sv.gnu.org
+LilyPond repository, it is called a @emph{remote branch}, and is
+meant to track the changes on the branch from git.sv.gnu.org: it
+will be updated every time you run
+@command{git@tie{}pull@tie{}origin} or
+@command{git@tie{}fetch@tie{}origin}.
+
+The @command{git@tie{}checkout} command has created a branch named
+@code{@var{branch}}. At the beginning, this branch is identical
+to @code{origin/@var{branch}}, but it will differ as soon as you
+make changes, e.g. adding newly translated pages or editing some
+documentation or code source file. Whenever you pull, you merge
+the changes from @code{origin/@var{branch}} and
+@code{@var{branch}} since the last pulling. If you do not have
+push (i.e. @qq{write}) access on git.sv.gnu.org, your
+@code{@var{branch}} will always differ from
+@code{origin/@var{branch}}. In this case, remember that other
+people working like you with the remote branch @code{@var{branch}}
+of git://git.sv.gnu.org/lilypond.git/ (called
+@code{origin/@var{branch}} on your local repository) know nothing
+about your own @code{@var{branch}}: this means that whenever you
+use a committish or make a patch, others expect you to take the
+latest commit of @code{origin/@var{branch}} as a reference.
+
+Finally, please remember to read the man page of every Git command
+you will find in this manual in case you want to discover
+alternate methods or just understand how it works.
+
@node Resolving conflicts
@subsection Resolving conflicts
@end example
+@node Working with remote branches
+@subsection Working with remote branches
+
+
+@subsubheading Fetching new branches from git.sv.gnu.org
+
+To fetch and check out a new branch named @code{@var{branch}} on
+git.sv.gnu.org, run from top of the Git repository
+
+@example
+git config --add remote.origin.fetch \
+ +refs/heads/@var{branch}:refs/remotes/origin/@var{branch}
+
+git checkout --track -b @var{branch} origin/@var{branch}
+@end example
+
+After this, you can pull @code{@var{branch}} from git.sv.gnu.org
+with:
+
+@example
+git pull
+@end example
+
+Note that this command generally fetches all branches you added
+with @command{git@tie{}remote@tie{}add} (when you initialized the
+repository) or @command{git@tie{}config@tie{}--add}, i.e. it
+updates all remote branches from remote @code{origin}, then it
+merges the remote branch tracked by the current branch into the
+current branch. For example, if your current branch is
+@code{master}, @code{origin/master} will be merged into
+@code{master}.
+
+
+@subsubheading Local clones, or having several working trees
+
+If you play with several Git branches, e.g. @code{master},
+@code{translation}, @code{stable/2.12}), you may want to
+have one source and build tree for each branch; this is possible
+with subdirectories of your local Git repository, used as local
+cloned subrepositories. To create a local clone for the branch
+named @code{@var{branch}}, run
+
+@example
+git checkout @var{branch}
+git clone -lsn . @var{subdir}
+cd @var{subdir}
+git reset --hard
+@end example
+
+Note that @code{@var{subdir}} must be a directory name which does
+not already exist. In @code{@var{subdir}}, you can use all Git
+commands to browse revisions history, commit and uncommit changes;
+to update the cloned subrepository with changes made on the main
+repository, cd into @code{@var{subdir}} and run
+@command{git@tie{}pull}; to send changes made on the subrepository
+back to the main repository, run @command{git@tie{}push} from
+@code{@var{subdir}}. Note that only one branch (the currently
+checked out branch) is created in the subrepository by default; it
+is possible to have several branches in a subrepository and do
+usual operations (checkout, merge, create, delete...) on these
+branches, but this possibility is not detailed here.
+
+When you push @code{@var{branch}} from @code{@var{subdir}} to the
+main repository, and @code{@var{branch}} is checked out in the
+main repository, you must save uncommitted changes (see
+@command{git@tie{}stash}) and do
+@command{git@tie{}reset@tie{}--hard} in the main repository in
+order to apply pushed changes in the working tree of the main
+repository.
+
+
@node Git log
@subsection Git log