INSTALL - compiling and installing GNU LilyPond
***********************************************
-Table of Contents
-*****************
-INSTALL - compiling and installing GNU LilyPond
- Precompiled binaries
- Downloading
- Compiling from source
- Downloading source code
- Requirements
- Compilation
- Running requirements
- Requirements for building documentation
- Building LilyPond
- Compiling
- Compiling for multiple platforms
- Compiling outside the source tree
- Useful `make' variables
- Building documentation
- Commands for building documentation
- Building documentation without compiling LilyPond
- Testing LilyPond
- Problems
- Bison 1.875
- Solaris
- FreeBSD
- International fonts
-
-
-There are two sets of releases for LilyPond: stable releases, and
-unstable development releases. Stable versions have an even-numbered
-`minor' version number (i.e. 2.8, 2.10, 2.12, etc). Development
-versions have an odd-numbered `minor' version number (i.e. 2.7, 2.9,
-2.11, etc).
-
- Building LilyPond is a very involved process, so we *highly*
-recommend using the precompiled binaries.
-
-Precompiled binaries
-====================
-
-Downloading
------------
-
-Check out `http://lilypond.org/web/install/' for up to date information
-on binary packages for your platform. If your operating system is not
-covered on that general page, please see the complete list at
-`http://download.linuxaudio.org/lilypond/binaries/'
-
- We currently create binaries for
-
- darwin-ppc - MacOS X powerpc
- darwin-x86 - MacOS X intel
- freebsd-64 - FreeBSD 6.x, x86_64
- freebsd-x86 - FreeBSD 4.x, x86
- linux-64 - Any GNU/Linux distribution, x86_64
- linux-ppc - Any GNU/Linux distribution, powerpc
- linux-x86 - Any GNU/Linux distribution, x86
- mingw - Windows x86
+1 Compilation
+ 1.1 Overview of compiling
+ 1.2 Requirements
+ 1.2.1 Requirements for running LilyPond
+ 1.2.2 Requirements for compiling LilyPond
+ Fedora
+ Linux Mint
+ OpenSUSE
+ Ubuntu
+ Other
+ 1.2.3 Requirements for building documentation
+ 1.3 Getting the source code
+ 1.4 Configuring ‘make’
+ 1.4.1 Running ‘./autogen.sh’
+ 1.4.2 Running ‘../configure’
+ Configuration options
+ Checking build dependencies
+ Configuring target directories
+ 1.5 Compiling LilyPond
+ 1.5.1 Using ‘make’
+ 1.5.2 Saving time with the ‘-j’ option
+ 1.5.3 Compiling for multiple platforms
+ 1.5.4 Useful ‘make’ variables
+ 1.6 Post-compilation options
+ 1.6.1 Installing LilyPond from a local build
+ 1.6.2 Generating documentation
+ Documentation editor’s edit/compile cycle
+ Building documentation
+ Building a single document
+ Saving time with ‘CPU_COUNT’
+ AJAX search
+ Installing documentation
+ Building documentation without compiling
+ 1.6.3 Testing LilyPond binary
+ 1.7 Problems
+ Compiling on MacOS X
+ Solaris
+ FreeBSD
+ International fonts
+ Using lilypond python libraries
+ 1.8 Concurrent stable and development versions
+ 1.9 Build system
+1 Compilation
+*************
+
+1.1 Overview of compiling
+=========================
+
+Compiling LilyPond from source is an involved process, and is only
+recommended for developers and packagers. Typical program users are
+instead encouraged to obtain the program from a package manager (on
+Unix) or by downloading a precompiled binary configured for a specific
+operating system. Pre-compiled binaries are available on the *note
+(lilypond-web)Download:: page.
+
+ Compiling LilyPond from source is necessary if you want to build,
+install, or test your own version of the program.
+
+ A successful compile can also be used to generate and install the
+documentation, incorporating any changes you may have made. However, a
+successful compile is not a requirement for generating the
+documentation. The documentation can be built using a Git repository in
+conjunction with a locally installed copy of the program. For more
+information, see *note Building documentation without compiling::.
+
+ Attempts to compile LilyPond natively on Windows have been
+unsuccessful, though a workaround is available (see *note
+(lilypond-contributor)LilyDev::).
+
+1.2 Requirements
+================
+
+1.2.1 Requirements for running LilyPond
+---------------------------------------
+
+This section contains the list of separate software packages that are
+required to run LilyPond.
+
+ • DejaVu fonts (http://www.dejavu-fonts.org/) These are normally
+ installed by default.
+
+ • FontConfig (http://www.fontconfig.org/) Use version 2.4.0 or newer.
+
+ • Freetype (http://www.freetype.org/) Use version 2.1.10 or newer.
+
+ • Ghostscript (http://www.ghostscript.com) Use version 8.60 or newer.
+
+ • Guile (http://www.gnu.org/software/guile/guile.html) Use version
+ 1.8.8. Version 2.x of Guile is not currently supported.
+
+ • Pango (http://www.pango.org/) User version 1.12 or newer.
+
+ • Python (http://www.python.org) Use version 2.4 or newer.
+
+ • International fonts. For example:
+
+ Fedora:
+
+ fonts-arabic
+ fonts-hebrew
+ fonts-ja
+ fonts-xorg-truetype
+ taipeifonts
+ ttfonts-ja
+ ttfonts-zh_CN
+
+ Debian based distributions:
+ emacs-intl-fonts
+ fonts-ipafont-gothic
+ fonts-ipafont-mincho
+ xfonts-bolkhov-75dpi
+ xfonts-cronyx-75dpi
+ xfonts-cronyx-100dpi
+ xfonts-intl-.*
-Known issues and warnings
-.........................
+ These are normally installed by default and are required only to
+ create music with international text or lyrics.
-If you have MacOS 10.3 or 10.4 and you would like to use Python scripts
-such as `convert-ly' and `lilypond-book', see *note Setup for MacOS X:
-(lilypond-program)Setup for MacOS X.
+1.2.2 Requirements for compiling LilyPond
+-----------------------------------------
-Compiling from source
-=====================
+This section contains instructions on how to quickly and easily get all
+the software packages required to build LilyPond.
-Downloading source code
------------------------
+ Most of the more popular Linux distributions only require a few
+simple commands to download all the software needed. For others, there
+is an explicit list of all the individual packages (as well as where to
+get them from) for those that are not already included in your
+distributions’ own repositories.
-Download source
+Fedora
+......
- * tarballs from `http://lilypond.org/download/' by HTTP.
+The following instructions were tested on ‘Fedora’ versions 22 & 23 and
+will download all the software required to both compile LilyPond and
+build the documentation.
- * tarballs from `http://download.linuxaudio.org/lilypond/' by HTTP.
+ • Download and install all the LilyPond build-dependencies
+ (approximately 700MB);
- * GIT from git.sv.gnu.org
- (http://git.sv.gnu.org/gitweb/?p=lilypond.git;a=summary)
+ sudo dnf builddep lilypond --nogpgcheck
- git clone git://git.sv.gnu.org/lilypond.git
+ • Download and install additional ‘build’ tools required for
+ compiling;
- The repository does not contain generated files. To create
- `configure', run
- ./autogen.sh
+ sudo dnf install autoconf gcc-c++
- For information on packaging, see `http://lilypond.org/devel'.
+ • Download ‘texi2html 1.82’ directly from:
+ <http://download.savannah.gnu.org/releases/texi2html/texi2html-1.82.tar.gz>;
-Requirements
-------------
+ ‘texi2html’ is only required if you intend to compile LilyPond’s
+ own documentation (e.g. to help with any document writing). The
+ version available in the Fedora repositories is too new and will
+ not work. Extract the files into an appropriate location and then
+ run the commands;
-Compilation
-...........
+ ./configure
+ make
+ sudo make install
+
+ This should install ‘texi2html 1.82’ into ‘/usr/local/bin’, which
+ will normally take priority over ‘/usr/bin’ where the later,
+ pre-installed versions gets put. Now verify that your operating
+ system is able to see the correct version of ‘texi2html’.
+
+ texi2html --version
+
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
+
+ sudo dnf install git
+
+ Also see *note (lilypond-contributor)Starting with Git::.
+
+ • To use the ‘lily-git.tcl’ GUI;
+
+ sudo dnf install tk
+
+ See *note (lilypond-contributor)lily-git::.
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
+
+ sudo dnf install texlive-xetex
+
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
+
+Linux Mint
+..........
+
+The following instructions were tested on ‘Linux Mint 17.1’ and ‘LMDE -
+Betsy’ and will download all the software required to both compile
+LilyPond and build the documentation..
+
+ • Enable the _sources_ repository;
+
+ 1. Using the _Software Sources_ GUI (located under
+ _Administration_).
+
+ 2. Select _Official Repositories_.
+
+ 3. Check the _Enable source code repositories_ box under the
+ _Source Code_ section.
+
+ 4. Click the _Update the cache_ button and when it has completed,
+ close the _Software Sources_ GUI.
+
+ • Download and install all the LilyPond build-dependencies
+ (approximately 200MB);
+
+ sudo apt-get build-dep lilypond
+
+ • Download and install additional ‘build’ tools required for
+ compiling;
+
+ sudo apt-get install autoconf fonts-texgyre texlive-lang-cyrillic
+
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
+
+ sudo apt-get install git
+
+ Also see *note (lilypond-contributor)Starting with Git::.
+
+ • To use the ‘lily-git.tcl’ GUI;
+
+ sudo apt-get install tk
+
+ Also see *note (lilypond-contributor)lily-git::.
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
+
+ sudo apt-get install texlive-xetex
+
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
+
+OpenSUSE
+........
+
+The following instructions were tested on ‘OpenSUSE 13.2’ and will
+download all the software required to both compile LilyPond and build
+the documentation.
+
+ • Add the _sources_ repository;
+
+ sudo zypper addrepo -f \
+ "http://download.opensuse.org/source/distribution/13.2/repo/oss/" sources
+
+ • Download and install all the LilyPond build-dependencies
+ (approximately 680MB);
+
+ sudo zypper source-install lilypond
+
+ • Download and install additional ‘build’ tools required for
+ compiling;
+
+ sudo zypper install make
+
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
+
+ sudo zypper install git
+
+ Also see *note (lilypond-contributor)Starting with Git::.
+
+ • To use the ‘lily-git.tcl’ GUI;
+
+ sudo zypper install tk
+
+ Also see *note (lilypond-contributor)lily-git::.
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
+
+ sudo zypper install texlive-xetex
+
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
+
+Ubuntu
+......
+
+The following commands were tested on Ubuntu versions ‘14.04 LTS’,
+‘14.10’ and ‘15.04’ and will download all the software required to both
+compile LilyPond and build the documentation.
+
+ • Download and install all the LilyPond build-dependencies
+ (approximately 200MB);
+
+ sudo apt-get build-dep lilypond
+
+ • Download and install additional ‘build’ tools required for
+ compiling;
+
+ sudo apt-get install autoconf fonts-texgyre texlive-lang-cyrillic
+
+ • Although not ‘required’ to compile LilyPond, if you intend to
+ contribute to LilyPond (codebase or help improve the documentation)
+ then it is recommended that you also need to install ‘git’.
+
+ sudo apt-get install git
+
+ Also see *note (lilypond-contributor)Starting with Git::.
+
+ • To use the ‘lily-git.tcl’ GUI;
+
+ sudo apt-get install tk
+
+ Also see *note (lilypond-contributor)lily-git::.
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package.
+
+ sudo apt-get install texlive-xetex
+
+ The scripts used to build the LilyPond documentation will use
+ ‘XeTex’ instead of ‘pdfTex’ to generate the PDF documents if
+ it is available. No additional configuration is required.
+
+Other
+.....
+
+The following individual software packages are required just to compile
+LilyPond.
+
+ • GNU Autoconf (http://www.gnu.org/software/autoconf)
+
+ • GNU Bison (http://www.gnu.org/software/bison/)
+
+ Use version ‘2.0’ or newer.
+
+ • GNU Compiler Collection (http://gcc.gnu.org/)
+
+ Use version ‘3.4’ or newer (‘4.x’ recommended).
+
+ • Flex (http://flex.sourceforge.net/)
+
+ • FontForge (http://fontforge.sf.net/)
+
+ Use version ‘20060125’ or newer (we recommend using at least
+ ‘20100501’); it must also be compiled with the ‘--enable-double’
+ switch, else this can lead to inaccurate intersection calculations
+ which end up with poorly-rendered glyphs in the output.
+
+ • GNU gettext (http://www.gnu.org/software/gettext/gettext.html)
+
+ Use version ‘0.17’ or newer.
+
+ • GNU Make (http://www.gnu.org/software/make/)
+
+ Use version ‘3.78’ or newer.
+
+ • MetaFont (http://metafont.tutorial.free.fr/)
+
+ The ‘mf-nowin’, ‘mf’, ‘mfw’ or ‘mfont’ binaries are usually
+ packaged along with TeX (http://www.latex-project.org/ftp.html).
+
+ • MetaPost (http://cm.bell-labs.com/who/hobby/MetaPost.html)
+
+ The ‘mpost’ binary is also usually packaged with TeX
+ (http://www.latex-project.org/ftp.html).
+
+ • Perl (http://www.perl.org/)
+
+ • Texinfo (http://www.gnu.org/software/texinfo/)
+
+ Use version ‘4.11’ or newer.
+
+ • Type 1 utilities (http://www.lcdf.org/~eddietwo/type/#t1utils)
+
+ Use version ‘1.33’ or newer.
+
+ • Cyrillic fonts (https://www.ctan.org/pkg/cyrillic?lang=en)
+
+ Often packaged in repositories as ‘texlive-lang-cyrillic’.
+
+ • TeX Gyre ‘OTF’ font packages. As of LilyPond version ‘2.19.26’,
+ the previous default serif, san serif and monospace fonts now use
+ Tex Gyre’s _Schola_, _Heros_ and _Cursor_ fonts respectively. Also
+ See *note (lilypond-notation)Fonts::.
+
+ Some distributions do not always provide ‘OTF’ font files in the
+ Tex Gyre packages from their repositories. Use the command
+ ‘fc-list | grep texgyre’ to list the fonts available to your system
+ and check that the appropriate ‘*.otf’ files are reported. If they
+ are not then download and manually extract the ‘OTF’ files to
+ either your local ‘~/.fonts/’ directory or use the ‘configure’
+ command and the ‘--with-texgyre-dir=/path_to_otf_files/’ option.
+
+ The following font families are required:
+
+ Schola (http://www.gust.org.pl/projects/e-foundry/tex-gyre/schola),
+ Heros (http://www.gust.org.pl/projects/e-foundry/tex-gyre/heros)
+ and Cursor
+ (http://www.gust.org.pl/projects/e-foundry/tex-gyre/cursor).
+
+1.2.3 Requirements for building documentation
+---------------------------------------------
+
+The entire set of documentation for the most current build of LilyPond
+is available online at
+<http://lilypond.org/doc/v2.19/Documentation/web/development>, but you
+can also build them locally from the source code. This process requires
+some additional tools and packages.
+
+ Note: If the instructions for one of the previously listed
+ Linux in the previous section (*note
+ (lilypond-contributor)Requirements for compiling LilyPond::)
+ have been used, then the following can be ignored as the
+ software should already be installed.
+
+ • Everything listed in *note Requirements for compiling LilyPond::
+
+ • ImageMagick (http://www.imagemagick.org/)
+
+ • Netpbm (http://netpbm.sourceforge.net/)
+
+ • gzip (http://gzip.org/)
+
+ • rsync (http://rsync.samba.org/)
+
+ • Texi2HTML (http://www.nongnu.org/texi2html/)
+
+ Use version ‘1.82’. Later versions will not work.
+
+ Download ‘texi2html 1.82’ directly from:
+ <http://download.savannah.gnu.org/releases/texi2html/texi2html-1.82.tar.gz>;
+
+ Extract the files into an appropriate location and then run the
+ commands;
+
+ ./configure
+ make
+ sudo make install
+
+ Now verify that your operating system is able to see the correct
+ version of ‘texi2html’.
+
+ texi2html --version
+
+ • Fonts required to build the documentation in addition to those
+ required to run LilyPond:
+
+ gsfonts
+ fonts-linuxlibertine
+ fonts-liberation
+ fonts-dejavu
+ fonts-freefont-otf
+ ttf-bitstream-vera
+ texlive-fonts-recommended
+ ttf-xfree86-nonfree
+
+ Note: By default, when building LilyPond’s documentation,
+ ‘pdfTeX’ is be used. However ligatures (fi, fl, ff etc.) may
+ not be printed in the PDF output. In this case XeTeX can be
+ used instead. Download and install the ‘texlive-xetex’
+ package. The scripts used to build the LilyPond documentation
+ will use ‘XeTex’ instead of ‘pdfTex’ to generate the PDF
+ documents if it is available. No additional configuration is
+ required.
+
+1.3 Getting the source code
+===========================
+
+Downloading the Git repository
+------------------------------
+
+In general, developers compile LilyPond from within a local Git
+repository. Setting up a local Git repository is explained in *note
+(lilypond-contributor)Starting with Git::.
+
+Downloading a source tarball
+----------------------------
+
+Packagers are encouraged to use source tarballs for compiling.
+
+ The tarball for the latest stable release is available on the *note
+(lilypond-web)Source:: page.
+
+The latest source code snapshot
+(http://git.savannah.gnu.org/gitweb/?p=lilypond.git;a=snapshot) is also
+available as a tarball from the GNU Savannah Git server.
+
+All tagged releases (including legacy stable versions and the most
+recent development release) are available here:
+
+ <http://download.linuxaudio.org/lilypond/source/>
+
+ Download the tarball to your ‘~/src/’ directory, or some other
+appropriate place.
+
+ Note: Be careful where you unpack the tarball! Any
+ subdirectories of the current folder named ‘lilypond/’ or
+ ‘lilypond-X.Y.Z/’ (where X.Y.Z is the release number) will be
+ overwritten if there is a name clash with the tarball.
-In addition to the packages needed for running LilyPond (see below), you
-need the following extra packages for building.
+ Unpack the tarball with this command:
- When installing a binary package FOO, you may need to install the
-FOO-devel, libFOO-dev or FOO-dev package too.
+ tar -xzf lilypond-X.Y.Z.tar.gz
- * FontForge (http://fontforge.sf.net/) 20060125 or newer.
+ This creates a subdirectory within the current directory called
+‘lilypond-X.Y.Z/’. Once unpacked, the source files occupy about 40 MB
+of disk space.
- * MetaFont (http://metafont.tutorial.free.fr/) (mf-nowin, mf, mfw or
- mfont binaries) and MetaPost
- (http://cm.bell-labs.com/who/hobby/MetaPost.html) (mpost binary),
- usually packaged with a LaTeX distribution like tetex or texlive.
+ Windows users wanting to look at the source code may have to download
+and install the free-software 7zip archiver (http://www.7-zip.org) to
+extract the tarball.
- * t1utils (http://www.lcdf.org/~eddietwo/type/#t1utils) (version
- 1.33 or newer recommended).
+1.4 Configuring ‘make’
+======================
- * New Century Schoolbook fonts, as PFB files. These are shipped with
- X11 and Ghostscript, and are named `c059033l.pfb' `c059036l.pfb',
- `c059013l.pfb' and `c059016l.pfb'.
+1.4.1 Running ‘./autogen.sh’
+----------------------------
- * GUILE (http://www.gnu.org/software/guile/guile.html) (version
- 1.8.2 or newer). If you are installing binary packages, you may
- need to install guile-devel or guile-dev or libguile-dev too.
+After you unpack the tarball (or download the Git repository), the
+contents of your top source directory should be similar to the current
+source tree listed at
+<http://git.sv.gnu.org/gitweb/?p=lilypond.git;a=tree>.
- * Texinfo (ftp://ftp.gnu.org/gnu/texinfo/) (version 4.11 or newer).
+ Next, you need to create the generated files; enter the following
+command from your top source directory:
- * The GNU c++ compiler (http://gcc.gnu.org/) (version 3.4 or newer.
- 4.x is strongly recommended).
+ ./autogen.sh --noconfigure
- * Python (http://www.python.org) (version 2.4 or newer)
+ This will generate a number of files and directories to aid
+configuration, such as ‘configure’, ‘README.txt’, etc.
- * GNU Make (ftp://ftp.gnu.org/gnu/make/) (version 3.78 or newer).
+ Next, create the build directory with:
- * gettext (http://www.gnu.org/software/gettext/gettext.html)
- (version 0.17 or newer).
+ mkdir build/
+ cd build/
- * Flex (http://www.gnu.org/software/flex/).
+ We heavily recommend building lilypond inside a separate directory
+with this method.
- * Perl (http://www.perl.org/).
+1.4.2 Running ‘../configure’
+----------------------------
- * GNU Bison (http://www.gnu.org/software/bison/).
+Configuration options
+.....................
- * All packages required for running, including development packages
- with header files and libraries.
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
+ The ‘../configure’ command (generated by ‘./autogen.sh’) provides
+many options for configuring ‘make’. To see them all, run:
-Running requirements
-....................
+ ../configure --help
-Running LilyPond requires proper installation of the following software
+Checking build dependencies
+...........................
- * Freetype (http://www.freetype.org/) (version 2.1.10 or newer).
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
- * FontConfig (http://fontconfig.org/) (version 2.2 or newer).
+ When ‘../configure’ is run without any arguments, it will check to
+make sure your system has everything required for compilation:
- * Pango (http://www.pango.org/) (version 1.12 or newer).
+ ../configure
- * GUILE (http://www.gnu.org/software/guile/guile.html) (version
- 1.8.2 or newer), or patch 1.8.1 with
- `http://lilypond.org/vc/gub.darcs/patches/guile-1.8-rational.patch'.
+ If any build dependency is missing, ‘../configure’ will return with:
- * Python (http://www.python.org) (version 2.4 or newer).
+ ERROR: Please install required programs: FOO
- * Ghostscript (http://www.ghostscript.com) (version 8.15 or newer.
- 8.60 recommended)
+ The following message is issued if you are missing programs that are
+only needed for building the documentation:
- * Dejaview. (This is normally installed by default)
+ WARNING: Please consider installing optional programs: BAR
- International fonts are required to create music with international
-text or lyrics.
+ If you intend to build the documentation locally, you will need to
+install or update these programs accordingly.
-Requirements for building documentation
-.......................................
+ Note: ‘../configure’ may fail to issue warnings for certain
+ documentation build requirements that are not met. If you
+ experience problems when building the documentation, you may
+ need to do a manual check of *note Requirements for building
+ documentation::.
-You can view the documentation online at `http://lilypond.org/doc/',
-but you can also build it locally. This process requires a successful
-compile of LilyPond, and some additional tools and packages:
+Configuring target directories
+..............................
- * The netpbm utilities (http://netpbm.sourceforge.net/)
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
- * ImageMagick
+ If you intend to use your local build to install a local copy of the
+program, you will probably want to configure the installation directory.
+Here are the relevant lines taken from the output of
+‘../configure --help’:
- * International fonts (see input/regression/utf-8.ly for hints about
- which font packages are necessary for your platform)
+ By default, ‘‘make install’’ will install all the files in
+ ‘/usr/local/bin’, ‘/usr/local/lib’ etc. You can specify an
+ installation prefix other than ‘/usr/local’ using ‘‘--prefix’’, for
+ instance ‘‘--prefix=$HOME’’.
- * Ghostscript 8.60 or newer, or 8.50 with the patch from
- `http://bugs.ghostscript.com/show_bug.cgi?id=688154' and the patch
- from `http://bugs.ghostscript.com/show_bug.cgi?id=688017'.
+ A typical installation prefix is ‘$HOME/usr’:
- * Texi2HTML (http://www.nongnu.org/texi2html/) 1.80 or newer
+ ../configure --prefix=$HOME/usr
- * rsync
+ Note that if you plan to install a local build on a system where you
+do not have root privileges, you will need to do something like this
+anyway—‘make install’ will only succeed if the installation prefix
+points to a directory where you have write permission (such as your home
+directory). The installation directory will be automatically created if
+necessary.
-Building LilyPond
------------------
+ The location of the ‘lilypond’ command installed by this process will
+be ‘PREFIX/bin/lilypond’; you may want to add ‘PREFIX/bin/’ to your
+‘$PATH’ if it is not already included.
-Compiling
-.........
+ It is also possible to specify separate installation directories for
+different types of program files. See the full output of
+‘../configure --help’ for more information.
-To install GNU LilyPond, type
+ If you encounter any problems, please see *note Problems::.
+
+1.5 Compiling LilyPond
+======================
+
+1.5.1 Using ‘make’
+------------------
+
+ Note: make sure that you are in the ‘build/’ subdirectory of
+ your source tree.
+
+ LilyPond is compiled with the ‘make’ command. Assuming ‘make’ is
+configured properly, you can simply run:
- gunzip -c lilypond-x.y.z | tar xf -
- cd lilypond-x.y.z
- ./configure # run with --help for applicable options
make
- su -c 'make install'
-If you are not root, you should choose a `--prefix' argument that
-points into your home directory, e.g.
+ ‘make’ is short for ‘make all’. To view a list of ‘make’ targets,
+run:
+
+ make help
+
+ TODO: Describe what ‘make’ actually does.
- ./configure --prefix=$HOME/usr
-Compiling for multiple platforms
-................................
+See also
+........
+
+ *note Generating documentation:: provides more info on the ‘make’
+targets used to build the LilyPond documentation.
+
+1.5.2 Saving time with the ‘-j’ option
+--------------------------------------
+
+If your system has multiple CPUs, you can speed up compilation by adding
+‘-jX’ to the ‘make’ command, where ‘X’ is one more than the number of
+cores you have. For example, a typical Core2Duo machine would use:
+
+ make -j3
+
+ If you get errors using the ‘-j’ option, and ‘make’ succeeds without
+it, try lowering the ‘X’ value.
+
+ Because multiple jobs run in parallel when ‘-j’ is used, it can be
+difficult to determine the source of an error when one occurs. In that
+case, running ‘make’ without the ‘-j’ is advised.
+
+1.5.3 Compiling for multiple platforms
+--------------------------------------
If you want to build multiple versions of LilyPond with different
-configuration settings, you can use the `--enable-config=CONF' option
-of `configure'. You should use `make conf=CONF' to generate the output
-in `out-CONF'. For example, suppose you want to build with and without
+configuration settings, you can use the ‘--enable-config=CONF’ option of
+‘configure’. You should use ‘make conf=CONF’ to generate the output in
+‘out-CONF’. For example, suppose you want to build with and without
profiling, then use the following for the normal build
./configure --prefix=$HOME/usr/ --enable-checking
make
- make install
and for the profiling version, specify a different configuration
- ./configure --prefix=$HOME/usr/ --enable-profiling --enable-config=prof --disable-checking
+ ./configure --prefix=$HOME/usr/ --enable-profiling \
+ --enable-config=prof --disable-checking
make conf=prof
+
+ If you wish to install a copy of the build with profiling, don’t
+forget to use ‘conf=CONF’ when issuing ‘make install’:
+
make conf=prof install
-Compiling outside the source tree
-.................................
-It is possible to compile LilyPond in a build tree different from the
-source tree, with `--srcdir' option of `configure':
+See also
+........
- mkdir lily-build && cd lily-build
- SOURCEDIR/configure --srcdir=SOURCEDIR
+ *note Installing LilyPond from a local build::
-Useful `make' variables
-.......................
+1.5.4 Useful ‘make’ variables
+-----------------------------
-If a less verbose build output if desired, the variable `QUIET_BUILD'
-may be set to `1' on `make' command line, or in `local.make' at top of
+If a less verbose build output if desired, the variable ‘QUIET_BUILD’
+may be set to ‘1’ on ‘make’ command line, or in ‘local.make’ at top of
the build tree.
-Building documentation
-----------------------
+1.6 Post-compilation options
+============================
+
+1.6.1 Installing LilyPond from a local build
+--------------------------------------------
+
+If you configured ‘make’ to install your local build in a directory
+where you normally have write permission (such as your home directory),
+and you have compiled LilyPond by running ‘make’, you can install the
+program in your target directory by running:
+
+ make install
+
+ If instead, your installation directory is not one that you can
+normally write to (such as the default ‘/usr/local/’, which typically is
+only writeable by the superuser), you will need to temporarily become
+the superuser when running ‘make install’:
+
+ sudo make install
+
+or...
+
+ su -c 'make install'
+
+ If you don’t have superuser privileges, then you need to configure
+the installation directory to one that you can write to, and then
+re-install. See *note Configuring target directories::.
+
+1.6.2 Generating documentation
+------------------------------
+
+Documentation editor’s edit/compile cycle
+.........................................
+
+ • Initial documentation build:
-This requires a successful compile of LilyPond, or using an external
-LilyPond binary.
+ make [-jX]
+ make [-jX CPU_COUNT=X] doc _## can take an hour or more_
+ make [-jX CPU_COUNT=X] doc-stage-1 _## to build only PDF documentation_
-Commands for building documentation
-...................................
+ • Edit/compile cycle:
-The documentation is built by issuing
+ _## edit source files, then..._
+
+ make [-jX] _## needed if editing outside_
+ _## Documentation/, but useful anyway_
+ _## for finding Texinfo errors._
+ make [-jX CPU_COUNT=X] doc _## usually faster than initial build._
+
+ • Reset:
+
+ It is generally possible to remove the compiled documentation from
+ your system with ‘make doc-clean’, but this method is not 100%
+ guaranteed. Instead, if you want to be sure you have a clean
+ system, we recommend that you delete your ‘build/’ directory, and
+ begin compiling from scratch. Since the documentation compile
+ takes much longer than the non-documentation compile, this does not
+ increase the overall time by a great deal.
+
+Building documentation
+......................
+
+After a successful compile (using ‘make’), the documentation can be
+built by issuing:
make doc
- After compilation, the HTML documentation tree is available in
-`out-www/offline-root/', and can be browsed locally.
+ or, to build only the PDF documentation and not the HTML,
+
+ make doc-stage-1
+
+ Note: The first time you run ‘make doc’, the process can
+ easily take an hour or more with not much output on the
+ command line.
+
+ After this initial build, ‘make doc’ only makes changes to the
+documentation where needed, so it may only take a minute or two to test
+changes if the documentation is already built.
+
+ If ‘make doc’ succeeds, the HTML documentation tree is available in
+‘out-www/offline-root/’, and can be browsed locally. Various portions
+of the documentation can be found by looking in ‘out/’ and ‘out-www’
+subdirectories in other places in the source tree, but these are only
+_portions_ of the docs. Please do not complain about anything which is
+broken in those places; the only complete set of documentation is in
+‘out-www/offline-root/’ from the top of the source tree.
+
+ ‘make doc’ sends the output from most of the compilation to logfiles.
+If the build fails for any reason, it should prompt you with the name of
+a logfile which will provide information to help you work out why the
+build failed. These logfiles are not deleted with ‘make doc-clean’. To
+remove all the logfiles generated by the compilation process, use:
+
+ make log-clean
+
+ ‘make doc’ compiles the documents for all languages. To save some
+compile time, the English language documents can be compiled on their
+own with:
+
+ make LANGS='' doc
+
+Similarly, it is possible to compile a subset of the translated
+documentation by specifying their language codes on the command line.
+For example, the French and German translations are compiled with:
+
+ make LANGS='de fr' doc
- The HTML, PDF and if available Info files can be installed into the
+Note that this will also compile the English version.
+
+ Compilation of documentation in Info format with images can be done
+separately by issuing:
+
+ make info
+
+An issue when switching branches between master and translation is the
+appearance/disappearance of translated versions of some manuals. If you
+see such a warning from make:
+
+ No rule to make target `X', needed by `Y'
+
+Your best bet is to delete the file Y.dep and to try again.
+
+Building a single document
+..........................
+
+It’s possible to build a single document. For example, to rebuild only
+‘contributor.pdf’, do the following:
+
+ cd build/
+ cd Documentation/
+ touch ../../Documentation/contributor.texi
+ make out=www out-www/contributor.pdf
+
+ If you are only working on a single document, test-building it in
+this way can give substantial time savings - recreating
+‘contributor.pdf’, for example, takes a matter of seconds.
+
+Saving time with ‘CPU_COUNT’
+............................
+
+The most time consuming task for building the documentation is running
+LilyPond to build images of music, and there cannot be several
+simultaneously running ‘lilypond-book’ instances, so the ‘-j’ ‘make’
+option does not significantly speed up the build process. To help speed
+it up, the makefile variable ‘CPU_COUNT’ may be set in ‘local.make’ or
+on the command line to the number of ‘.ly’ files that LilyPond should
+process simultaneously, e.g. on a bi-processor or dual core machine:
+
+ make -j3 CPU_COUNT=3 doc
+
+The recommended value of ‘CPU_COUNT’ is one plus the number of cores or
+processors, but it is advisable to set it to a smaller value unless your
+system has enough RAM to run that many simultaneous LilyPond instances.
+Also, values for the ‘-j’ option that pose problems with ‘make’ are less
+likely to pose problems with ‘make doc’ (this applies to both ‘-j’ and
+‘CPU_COUNT’). For example, with a quad-core processor, it is possible
+for ‘make -j5 CPU_COUNT=5 doc’ to work consistently even if ‘make -j5’
+rarely succeeds.
+
+AJAX search
+...........
+
+To build the documentation with interactive searching, use:
+
+ make doc AJAX_SEARCH=1
+
+ This requires PHP, and you must view the docs via a http connection
+(you cannot view them on your local filesystem).
+
+ Note: Due to potential security or load issues, this option is
+ not enabled in the official documentation builds. Enable at
+ your own risk.
+
+Installing documentation
+........................
+
+The HTML, PDF and if available Info files can be installed into the
standard documentation path by issuing
make install-doc
prefix is properly set; otherwise, instructions to complete proper
installation of Info documentation are printed on standard output.
- Compilation of documentation in Info format with images can be done
-separately by issuing
-
- make info
-
-Separate installation of this documentation is done by issuing
+ To install the Info documentation separately, run:
make install-info
-Note that to get the images in Info documentation, `install-doc' target
+Note that to get the images in Info documentation, ‘install-doc’ target
creates symbolic links to HTML and PDF installed documentation tree in
-`PREFIX/share/info', in order to save disk space, whereas
-`install-info' copies images in `PREFIX/share/info' subdirectories.
+‘PREFIX/share/info’, in order to save disk space, whereas ‘install-info’
+copies images in ‘PREFIX/share/info’ subdirectories.
It is possible to build a documentation tree in
-`out-www/online-root/', with special processing, so it can be used on a
+‘out-www/online-root/’, with special processing, so it can be used on a
website with content negotiation for automatic language selection; this
can be achieved by issuing
make WEB_TARGETS=online doc
-and both `offline' and `online' targets can be generated by issuing
+and both ‘offline’ and ‘online’ targets can be generated by issuing
make WEB_TARGETS="offline online" doc
make help
from every directory in the build tree. Most targets for documentation
-maintenance are available from `Documentation/'; for more information,
-see the Contributors' Guide, section _Documentation work_.
+maintenance are available from ‘Documentation/’; for more information,
+see *note (lilypond-contributor)Documentation work::.
- The makefile variable `QUIET_BUILD' may be set to `1' for a less
+ The makefile variable ‘QUIET_BUILD’ may be set to ‘1’ for a less
verbose build output, just like for building the programs.
-
-
-Known issues and warnings
-.........................
-
-The most time consuming task for building the documentation is running
-LilyPond to build images of music, and there cannot be several
-simultaneously running `lilypond-book' instances, so `-j' `make' option
-does not significantly speed up the build process. To help speed it
-up, the makefile variable CPU_COUNT may be set in `local.make' or on
-the command line to the number of `.ly' files that LilyPond should
-process simultaneously, e.g. on a bi-processor or dual core machine
-
- make -j3 CPU_COUNT=3 doc
-
-The recommended value of CPU_COUNT is one plus the number of cores or
-processors, but it is advisable to set it to a smaller value if your
-system has not enough RAM to run that many simultaneous LilyPond
-instances.
-
- If source files have changed since last documentation build, output
-files that need to be rebuilt are normally rebuilt, even if you do not
-run `make doc-clean' first. However, building dependencies in the
-documentation are so complex that rebuilding of some targets may not be
-triggered as they should be; a workaround is to force rebuilding by
-touching appropriate files, e.g.
-
- touch Documentation/user/*.itely
- touch input/lsr/*.ly
-
-Building documentation without compiling LilyPond
-.................................................
+Building documentation without compiling
+........................................
The documentation can be built locally without compiling LilyPond
binary, if LilyPond is already installed on your system.
./autogen.sh # ignore any warning messages
cp GNUmakefile.in GNUmakefile
- make -C python
+ make -C scripts && make -C python
nice make LILYPOND_EXTERNAL_BINARY=/path/to/bin/lilypond doc
- Please note that this may break sometimes - for example, if a new
+ Please note that this may break sometimes – for example, if a new
feature is added with a test file in input/regression, even the latest
development release of LilyPond will fail to build the docs.
- You may build the manual without building all the `input/*' stuff:
-change directory, for example to `Documentation/user', issue `make
-doc', which will build documentation in a subdirectory `out-www' from
-the source files in current directory. In this case, if you also want
-to browse the documentation in its post-processed form, change back to
-top directory and issue
+ You may build the manual without building all the ‘input/*’ stuff
+(i.e. mostly regression tests): change directory, for example to
+‘Documentation/’, issue ‘make doc’, which will build documentation in a
+subdirectory ‘out-www’ from the source files in current directory. In
+this case, if you also want to browse the documentation in its
+post-processed form, change back to top directory and issue
make out=www WWW-post
Known issues and warnings
.........................
-You may also need to create a script for `pngtopnm' and `pnmtopng'. On
+You may also need to create a script for ‘pngtopnm’ and ‘pnmtopng’. On
GNU/Linux, I use this:
export LD_LIBRARY_PATH=/usr/lib
exec /usr/bin/pngtopnm "$@"
- On MacOS X, I use this:
+ On MacOS X with fink, I use this:
export DYLD_LIBRARY_PATH=/sw/lib
exec /sw/bin/pngtopnm "$@"
-Testing LilyPond
-----------------
+ On MacOS X with macports, you should use this:
+
+export DYLD_FALLBACK_LIBRARY_PATH=/opt/local/lib
+exec /opt/local/bin/pngtopnm "$@"
+
+1.6.3 Testing LilyPond binary
+-----------------------------
LilyPond comes with an extensive suite that exercises the entire
-program. This suite can be used to automatically check the impact of a
-change. This is done as follows
+program. This suite can be used to test that the binary has been built
+correctly.
+
+ The test suite can be executed with:
- make test-baseline
- _## apply your changes, compile_
- make check
+make test
- This will leave an HTML page `out/test-results/index.html'. This
-page shows all the important differences that your change introduced,
-whether in the layout, MIDI, performance or error reporting.
+ If the test suite completes successfully, the LilyPond binary has
+been verified.
- To rerun tests, use
+ More information on the regression test suite is found at *note
+(lilypond-contributor)Regression tests::.
- make test-redo _## redo files differing from baseline_
- make test-clean _## remove all test results_
+1.7 Problems
+============
-and then run `make check' again.
+For help and questions use <lilypond-user@gnu.org>. Send bug reports to
+<bug-lilypond@gnu.org>.
- For tracking memory usage as part of this test, you will need GUILE
-CVS; especially the following patch:
-`http://lilypond.org/vc/gub.darcs/patches/guile-1.9-gcstats.patch'.
+ Bugs that are not fault of LilyPond are documented here.
- For checking the coverage of the test suite, do the following
+Compiling on MacOS X
+--------------------
- ./scripts/auxiliar/build-coverage.sh
- _# uncovered files, least covered first_
- ./scripts/auxiliar/coverage.py --summary out-cov/*.cc
- _# consecutive uncovered lines, longest first_
- ./scripts/auxiliar/coverage.py --uncovered out-cov/*.cc
+Here are special instructions for compiling under MacOS X. These
+instructions assume that dependencies are installed using MacPorts.
+(http://www.macports.org/) The instructions have been tested using OS X
+10.5 (Leopard).
-Problems
---------
+ First, install the relevant dependencies using MacPorts.
-For help and questions use <lilypond-user@gnu.org>. Send bug reports
-to <bug-lilypond@gnu.org>.
+ Next, add the following to your relevant shell initialization files.
+This is ‘~/.profile’ by default. You should create this file if it does
+not exist.
- Bugs that are not fault of LilyPond are documented here.
+ export PATH=/opt/local/bin:/opt/local/sbin:$PATH
+ export DYLD_FALLBACK_LIBRARY_PATH=/opt/local/lib:$DYLD_FALLBACK_LIBRARY_PATH
-Bison 1.875
-...........
+ Now you must edit the generated ‘config.make’ file. Change
+
+ FLEXLEXER_FILE = /usr/include/FlexLexer.h
+
+to:
+
+ FLEXLEXER_FILE = /opt/local/include/FlexLexer.h
+
+ At this point, you should verify that you have the appropriate fonts
+installed with your ghostscript installation. Check ‘ls
+/opt/local/share/ghostscript/fonts’ for: ’c0590*’ files (.pfb, .pfb and
+.afm). If you don’t have them, run the following commands to grab them
+from the ghostscript SVN server and install them in the appropriate
+location:
+
+ svn export http://svn.ghostscript.com/ghostscript/tags/urw-fonts-1.0.7pre44/
+ sudo mv urw-fonts-1.0.7pre44/* /opt/local/share/ghostscript/fonts/
+ rm -rf urw-fonts-1.07pre44
-There is a bug in bison-1.875: compilation fails with "parse error
-before `goto'" in line 4922 due to a bug in bison. To fix, please
-recompile bison 1.875 with the following fix
+ Now run the ‘./configure’ script. To avoid complications with
+automatic font detection, add
- $ cd lily; make out/parser.cc
- $ vi +4919 out/parser.cc
- # append a semicolon to the line containing "__attribute__ ((__unused__))
- # save
- $ make
+ --with-fonts-dir=/opt/local/share/ghostscript/fonts
Solaris
-.......
+-------
Solaris7, ./configure
- `./configure' needs a POSIX compliant shell. On Solaris7, `/bin/sh'
-is not yet POSIX compliant, but `/bin/ksh' or bash is. Run configure
+ ‘./configure’ needs a POSIX compliant shell. On Solaris7, ‘/bin/sh’
+is not yet POSIX compliant, but ‘/bin/ksh’ or bash is. Run configure
like
CONFIG_SHELL=/bin/ksh ksh -c ./configure
CONFIG_SHELL=/bin/bash bash -c ./configure
FreeBSD
-.......
+-------
-To use system fonts, dejaview must be installed. With the default
-port, the fonts are installed in `usr/X11R6/lib/X11/fonts/dejavu'.
+To use system fonts, dejaview must be installed. With the default port,
+the fonts are installed in ‘usr/X11R6/lib/X11/fonts/dejavu’.
- Open the file `$LILYPONDBASE/usr/etc/fonts/local.conf' and add the
-following line just after the `<fontconfig>' line. (Adjust as necessary
+ Open the file ‘$LILYPONDBASE/usr/etc/fonts/local.conf’ and add the
+following line just after the ‘<fontconfig>’ line. (Adjust as necessary
for your hierarchy.)
<dir>/usr/X11R6/lib/X11/fonts</dir>
International fonts
-...................
+-------------------
-On MacOS X, all fonts are installed by default. However, finding all
+On Mac OS X, all fonts are installed by default. However, finding all
system fonts requires a bit of configuration; see this post
(http://lists.gnu.org/archive/html/lilypond-user/2007-03/msg00472.html)
-on the `lilypond-user' mailing list.
+on the ‘lilypond-user’ mailing list.
On Linux, international fonts are installed by different means on
every distribution. We cannot list the exact commands or packages that
Debian GNU/Linux
apt-get install emacs-intl-fonts xfonts-intl-.* \
- ttf-kochi-gothic ttf-kochi-mincho \
+ fonts-ipafont-gothic fonts-ipafont-mincho \
xfonts-bolkhov-75dpi xfonts-cronyx-100dpi xfonts-cronyx-75dpi
+Using lilypond python libraries
+-------------------------------
+
+If you want to use lilypond’s python libraries (either running certain
+build scripts manually, or using them in other programs), set
+‘PYTHONPATH’ to ‘python/out’ in your build directory, or
+‘.../usr/lib/lilypond/current/python’ in the installation directory
+structure.
+
+1.8 Concurrent stable and development versions
+==============================================
+
+It can be useful to have both the stable and the development versions of
+LilyPond available at once. One way to do this on GNU/Linux is to
+install the stable version using the precompiled binary, and run the
+development version from the source tree. After running ‘make all’ from
+the top directory of the LilyPond source files, there will be a binary
+called ‘lilypond’ in the ‘out’ directory:
+
+ <PATH TO>/lilypond/out/bin/lilypond
+
+ This binary can be run without actually doing the ‘make install’
+command. The advantage to this is that you can have all of the latest
+changes available after pulling from git and running ‘make all’, without
+having to uninstall the old version and reinstall the new.
+
+ So, to use the stable version, install it as usual and use the normal
+commands:
+
+ lilypond foobar.ly
+
+ To use the development version, create a link to the binary in the
+source tree by saving the following line in a file somewhere in your
+‘$PATH’:
+
+ exec <PATH TO>/lilypond/out/bin/lilypond "$@"
+
+ Save it as ‘Lilypond’ (with a capital L to distinguish it from the
+stable ‘lilypond’), and make it executable:
+
+ chmod +x Lilypond
+
+ Then you can invoke the development version this way:
+
+ Lilypond foobar.ly
+
+ TODO: ADD
+
+ - other compilation tricks for developers
+
+1.9 Build system
+================
+
+We currently use make and stepmake, which is complicated and only used
+by us. Hopefully this will change in the future.
+
+Version-specific texinfo macros
+-------------------------------
+
+ • made with ‘scripts/build/create-version-itexi.py’ and
+ ‘scripts/build/create-weblinks-itexi.py’
+
+ • used extensively in the ‘WEBSITE_ONLY_BUILD’ version of the website
+ (made with ‘website.make’, used on lilypond.org)
+
+ • not (?) used in the main docs?
+
+ • the numbers in VERSION file: MINOR_VERSION should be 1 more than
+ the last release, VERSION_DEVEL should be the last *online*
+ release. Yes, VERSION_DEVEL is less than VERSION.
+