From: Danny Nguyen Date: Fri, 4 Aug 2017 17:52:08 +0000 (-0400) Subject: Change installation of avr-libc to avr-gcc, now that avr-libc is integrated into... X-Git-Url: https://git.donarmstrong.com/?p=qmk_firmware.git;a=commitdiff_plain;h=f1536a3f547a48a0b244be122937c3329dfd31e0 Change installation of avr-libc to avr-gcc, now that avr-libc is integrated into the avr-gcc build --- diff --git a/docs/build_environment_setup.md b/docs/build_environment_setup.md index 2282e9d13..d2d63defb 100644 --- a/docs/build_environment_setup.md +++ b/docs/build_environment_setup.md @@ -50,10 +50,10 @@ If you have trouble and want to ask for help, it is useful to generate a *Win_Ch If you're using [homebrew,](http://brew.sh/) you can use the following commands: brew tap osx-cross/avr - brew install avr-libc + brew install avr-gcc brew install dfu-programmer -This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage. +This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-gcc can take over 20 minutes and exhibit high CPU usage. You can also try these instructions: