--- /dev/null
+/*
+Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Drop
+#define PRODUCT ZJ68
+#define DESCRIPTION QMK ZJ68
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
--- /dev/null
+{
+ "keyboard_name": "ZJ68",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ { "label": "~", "x": 0, "y": 0 },
+ { "label": "!", "x": 1, "y": 0 },
+ { "label": "@", "x": 2, "y": 0 },
+ { "label": "#", "x": 3, "y": 0 },
+ { "label": "$", "x": 4, "y": 0 },
+ { "label": "%", "x": 5, "y": 0 },
+ { "label": "^", "x": 6, "y": 0 },
+ { "label": "&", "x": 7, "y": 0 },
+ { "label": "*", "x": 8, "y": 0 },
+ { "label": "(", "x": 9, "y": 0 },
+ { "label": ")", "x": 10, "y": 0 },
+ { "label": "_", "x": 11, "y": 0 },
+ { "label": "+", "x": 12, "y": 0 },
+ { "x": 13, "y": 0 },
+ { "x": 14, "y": 0 },
+ { "x": 15, "y": 0 },
+
+ { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+ { "label": "Q", "x": 1.5, "y": 1 },
+ { "label": "W", "x": 2.5, "y": 1 },
+ { "label": "E", "x": 3.5, "y": 1 },
+ { "label": "R", "x": 4.5, "y": 1 },
+ { "label": "T", "x": 5.5, "y": 1 },
+ { "label": "Y", "x": 6.5, "y": 1 },
+ { "label": "U", "x": 7.5, "y": 1 },
+ { "label": "I", "x": 8.5, "y": 1 },
+ { "label": "O", "x": 9.5, "y": 1 },
+ { "label": "P", "x": 10.5, "y": 1 },
+ { "label": "{", "x": 11.5, "y": 1 },
+ { "label": "}", "x": 12.5, "y": 1 },
+ { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
+ { "x": 15, "y": 1 },
+
+ { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+ { "label": "A", "x": 1.75, "y": 2 },
+ { "label": "S", "x": 2.75, "y": 2 },
+ { "label": "D", "x": 3.75, "y": 2 },
+ { "label": "F", "x": 4.75, "y": 2 },
+ { "label": "G", "x": 5.75, "y": 2 },
+ { "label": "H", "x": 6.75, "y": 2 },
+ { "label": "J", "x": 7.75, "y": 2 },
+ { "label": "K", "x": 8.75, "y": 2 },
+ { "label": "L", "x": 9.75, "y": 2 },
+ { "label": ":", "x": 10.75, "y": 2 },
+ { "label": "\"", "x": 11.75, "y": 2 },
+ { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+ { "x": 15, "y": 2 },
+
+ { "label": "Shift", "x": 0, "y": 3, "w": 1.25 },
+ { "x": 1.25, "y": 3 },
+ { "label": "Z", "x": 2.25, "y": 3 },
+ { "label": "X", "x": 3.25, "y": 3 },
+ { "label": "C", "x": 4.25, "y": 3 },
+ { "label": "V", "x": 5.25, "y": 3 },
+ { "label": "B", "x": 6.25, "y": 3 },
+ { "label": "N", "x": 7.25, "y": 3 },
+ { "label": "M", "x": 8.25, "y": 3 },
+ { "label": "<", "x": 9.25, "y": 3 },
+ { "label": ">", "x": 10.25, "y": 3 },
+ { "label": "?", "x": 11.25, "y": 3 },
+ { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
+ { "x": 14, "y": 3 },
+ { "x": 15, "y": 3 },
+
+ { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
+ { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 },
+ { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 },
+ { "x": 3.75, "y": 4, "w": 6.25 },
+ { "label": "Alt", "x": 10, "y": 4 },
+ { "label": "Win", "x": 11, "y": 4 },
+ { "x": 12, "y": 4 },
+ { "x": 13, "y": 4 },
+ { "x": 14, "y": 4 },
+ { "x": 15, "y": 4 }
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, RESET, KC_PSCR,
+ RGB_TOG, _______, KC_UP, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,
+ BL_TOGG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, KC_END,
+ _______, _______, _______, BL_DEC, BL_INC, BL_STEP, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
--- /dev/null
+# ZJ68 Default layout
+
+This is the default layout from the json file provided on Drop, that was intended to be used on kbdfirmware, with an added soft reset on fn(backspace).
\ No newline at end of file
--- /dev/null
+/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_65_ansi_split_bs(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ MO(1), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ LAYOUT_65_ansi_split_bs(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
--- /dev/null
+# ZJ68 W/ Split Backspace
+
+The plate that comes with the kit from Drop only allows one layout, but the pcb supports having a split backspace, so by widening the plate where the stabilizers are meant to go, you can fit the two switches in, if you want to go back to a single backspace later, you can still use pcb mount stabilizers.
\ No newline at end of file
--- /dev/null
+# ZJ68
+
+
+
+A 65% keyboard kit sold through Drop.
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: ZJ68 PCB
+Hardware Availability: [Drop](https://drop.com/buy/zj68-68-key-mechanical-keyboard-kit?mode=guest_open)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make zj68:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# comment out to disable the options.
+#
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE = no
+
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+RGBLIGHT_ENABLE = no
+
+LAYOUTS = 65_ansi
--- /dev/null
+/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "zj68.h"
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
--- /dev/null
+/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_65_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K4E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
+ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \
+}
+
+#define LAYOUT_65_ansi_split_bs( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
+ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \
+}
+
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \
+}
projects / qmk_firmware.git / commitdiff