X-Git-Url: https://git.donarmstrong.com/?p=qmk_firmware.git;a=blobdiff_plain;f=quantum%2Fquantum.c;h=31dfa60cd61603a641aa4aaa4706eaffbdf8959f;hp=aad678e1ad47087906f862495af210365854b791;hb=a5ecf146085716f3a79424c2f4b3b3039ff36b3e;hpb=ef5b161bb5ebf137bd95e4462588bb20ffbe0f79 diff --git a/quantum/quantum.c b/quantum/quantum.c index aad678e1a..31dfa60cd 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -15,12 +15,13 @@ */ #include "quantum.h" -#ifdef PROTOCOL_LUFA -#include "outputselect.h" + +#if !defined(RGBLIGHT_ENABLE) && !defined(RGB_MATRIX_ENABLE) + #include "rgb.h" #endif -#ifndef TAPPING_TERM -#define TAPPING_TERM 200 +#ifdef PROTOCOL_LUFA +#include "outputselect.h" #endif #ifndef BREATHING_PERIOD @@ -42,6 +43,18 @@ extern backlight_config_t backlight_config; #include "process_midi.h" #endif +#ifdef VELOCIKEY_ENABLE +#include "velocikey.h" +#endif + +#ifdef HAPTIC_ENABLE + #include "haptic.h" +#endif + +#ifdef ENCODER_ENABLE +#include "encoder.h" +#endif + #ifdef AUDIO_ENABLE #ifndef GOODBYE_SONG #define GOODBYE_SONG SONG(GOODBYE_SOUND) @@ -127,6 +140,14 @@ void unregister_code16 (uint16_t code) { } } +void tap_code16(uint16_t code) { + register_code16(code); + #if TAP_CODE_DELAY > 0 + wait_ms(TAP_CODE_DELAY); + #endif + unregister_code16(code); +} + __attribute__ ((weak)) bool process_action_kb(keyrecord_t *record) { return true; @@ -158,8 +179,12 @@ void reset_keyboard(void) { wait_ms(1); stop_all_notes(); #else + shutdown_user(); wait_ms(250); #endif +#ifdef HAPTIC_ENABLE + haptic_shutdown(); +#endif // this is also done later in bootloader.c - not sure if it's neccesary here #ifdef BOOTLOADER_CATERINA *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific @@ -167,49 +192,44 @@ void reset_keyboard(void) { bootloader_jump(); } -// Shift / paren setup - -#ifndef LSPO_KEY - #define LSPO_KEY KC_9 -#endif -#ifndef RSPC_KEY - #define RSPC_KEY KC_0 -#endif - -// Shift / Enter setup -#ifndef SFTENT_KEY - #define SFTENT_KEY KC_ENT -#endif - -static bool shift_interrupted[2] = {0, 0}; -static uint16_t scs_timer[2] = {0, 0}; - /* true if the last press of GRAVE_ESC was shifted (i.e. GUI or SHIFT were pressed), false otherwise. * Used to ensure that the correct keycode is released if the key is released. */ static bool grave_esc_was_shifted = false; -bool process_record_quantum(keyrecord_t *record) { +/* Convert record into usable keycode via the contained event. */ +uint16_t get_record_keycode(keyrecord_t *record) { + return get_event_keycode(record->event); +} + - /* This gets the keycode from the key pressed */ - keypos_t key = record->event.key; - uint16_t keycode; +/* Convert event into usable keycode. Checks the layer cache to ensure that it + * retains the correct keycode after a layer change, if the key is still pressed. + */ +uint16_t get_event_keycode(keyevent_t event) { - #if !defined(NO_ACTION_LAYER) && defined(PREVENT_STUCK_MODIFIERS) + #if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE) /* TODO: Use store_or_get_action() or a similar function. */ if (!disable_action_cache) { uint8_t layer; - if (record->event.pressed) { - layer = layer_switch_get_layer(key); - update_source_layers_cache(key, layer); + if (event.pressed) { + layer = layer_switch_get_layer(event.key); + update_source_layers_cache(event.key, layer); } else { - layer = read_source_layers_cache(key); + layer = read_source_layers_cache(event.key); } - keycode = keymap_key_to_keycode(layer, key); + return keymap_key_to_keycode(layer, event.key); } else #endif - keycode = keymap_key_to_keycode(layer_switch_get_layer(key), key); + return keymap_key_to_keycode(layer_switch_get_layer(event.key), event.key); +} + +/* Main keycode processing function. Hands off handling to other functions, + * then processes internal Quantum keycodes, then processes ACTIONs. + */ +bool process_record_quantum(keyrecord_t *record) { + uint16_t keycode = get_record_keycode(record); // This is how you use actions here // if (keycode == KC_LEAD) { @@ -219,6 +239,10 @@ bool process_record_quantum(keyrecord_t *record) { // return false; // } + #ifdef VELOCIKEY_ENABLE + if (velocikey_enabled() && record->event.pressed) { velocikey_accelerate(); } + #endif + #ifdef TAP_DANCE_ENABLE preprocess_tap_dance(keycode, record); #endif @@ -229,12 +253,15 @@ bool process_record_quantum(keyrecord_t *record) { process_key_lock(&keycode, record) && #endif #if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY) - process_clicky(keycode, record) && + process_clicky(keycode, record) && #endif //AUDIO_CLICKY - process_record_kb(keycode, record) && - #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYPRESSES) + #ifdef HAPTIC_ENABLE + process_haptic(keycode, record) && + #endif //HAPTIC_ENABLE + #if defined(RGB_MATRIX_ENABLE) process_rgb_matrix(keycode, record) && #endif + process_record_kb(keycode, record) && #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) process_midi(keycode, record) && #endif @@ -244,38 +271,32 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef STENO_ENABLE process_steno(keycode, record) && #endif - #if ( defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))) && !defined(NO_MUSIC_MODE) + #if (defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))) && !defined(NO_MUSIC_MODE) process_music(keycode, record) && #endif #ifdef TAP_DANCE_ENABLE process_tap_dance(keycode, record) && #endif - #ifndef DISABLE_LEADER - process_leader(keycode, record) && + #if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) + process_unicode_common(keycode, record) && #endif - #ifndef DISABLE_CHORDING - process_chording(keycode, record) && + #ifdef LEADER_ENABLE + process_leader(keycode, record) && #endif #ifdef COMBO_ENABLE process_combo(keycode, record) && #endif - #ifdef UNICODE_ENABLE - process_unicode(keycode, record) && - #endif - #ifdef UCIS_ENABLE - process_ucis(keycode, record) && - #endif #ifdef PRINTING_ENABLE process_printer(keycode, record) && #endif #ifdef AUTO_SHIFT_ENABLE process_auto_shift(keycode, record) && #endif - #ifdef UNICODEMAP_ENABLE - process_unicode_map(keycode, record) && - #endif #ifdef TERMINAL_ENABLE process_terminal(keycode, record) && + #endif + #ifdef SPACE_CADET_ENABLE + process_space_cadet(keycode, record) && #endif true)) { return false; @@ -291,8 +312,17 @@ bool process_record_quantum(keyrecord_t *record) { return false; case DEBUG: if (record->event.pressed) { - debug_enable = true; + debug_enable ^= 1; + if (debug_enable) { print("DEBUG: enabled.\n"); + } else { + print("DEBUG: disabled.\n"); + } + } + return false; + case EEPROM_RESET: + if (record->event.pressed) { + eeconfig_init(); } return false; #ifdef FAUXCLICKY_ENABLE @@ -321,9 +351,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_toggle(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_MODE_FORWARD: @@ -335,9 +362,6 @@ bool process_record_quantum(keyrecord_t *record) { else { rgblight_step(); } - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_MODE_REVERSE: @@ -349,9 +373,6 @@ bool process_record_quantum(keyrecord_t *record) { else { rgblight_step_reverse(); } - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_HUI: @@ -362,9 +383,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_increase_hue(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_HUD: @@ -375,9 +393,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_decrease_hue(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_SAI: @@ -388,9 +403,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_increase_sat(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_SAD: @@ -401,9 +413,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_decrease_sat(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_VAI: @@ -414,9 +423,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_increase_val(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_VAD: @@ -427,9 +433,6 @@ bool process_record_quantum(keyrecord_t *record) { if (!record->event.pressed) { #endif rgblight_decrease_val(); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif } return false; case RGB_SPI: @@ -444,78 +447,104 @@ bool process_record_quantum(keyrecord_t *record) { return false; case RGB_MODE_PLAIN: if (record->event.pressed) { - rgblight_mode(1); - #ifdef SPLIT_KEYBOARD - RGB_DIRTY = true; - #endif + rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT); } return false; case RGB_MODE_BREATHE: + #ifdef RGBLIGHT_EFFECT_BREATHING if (record->event.pressed) { - if ((2 <= rgblight_get_mode()) && (rgblight_get_mode() < 5)) { + if ((RGBLIGHT_MODE_BREATHING <= rgblight_get_mode()) && + (rgblight_get_mode() < RGBLIGHT_MODE_BREATHING_end)) { rgblight_step(); } else { - rgblight_mode(2); + rgblight_mode(RGBLIGHT_MODE_BREATHING); } } + #endif return false; case RGB_MODE_RAINBOW: + #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD if (record->event.pressed) { - if ((6 <= rgblight_get_mode()) && (rgblight_get_mode() < 8)) { + if ((RGBLIGHT_MODE_RAINBOW_MOOD <= rgblight_get_mode()) && + (rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_MOOD_end)) { rgblight_step(); } else { - rgblight_mode(6); + rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD); } } + #endif return false; case RGB_MODE_SWIRL: + #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL if (record->event.pressed) { - if ((9 <= rgblight_get_mode()) && (rgblight_get_mode() < 14)) { + if ((RGBLIGHT_MODE_RAINBOW_SWIRL <= rgblight_get_mode()) && + (rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_SWIRL_end)) { rgblight_step(); } else { - rgblight_mode(9); + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL); } } + #endif return false; case RGB_MODE_SNAKE: + #ifdef RGBLIGHT_EFFECT_SNAKE if (record->event.pressed) { - if ((15 <= rgblight_get_mode()) && (rgblight_get_mode() < 20)) { + if ((RGBLIGHT_MODE_SNAKE <= rgblight_get_mode()) && + (rgblight_get_mode() < RGBLIGHT_MODE_SNAKE_end)) { rgblight_step(); } else { - rgblight_mode(15); + rgblight_mode(RGBLIGHT_MODE_SNAKE); } } + #endif return false; case RGB_MODE_KNIGHT: + #ifdef RGBLIGHT_EFFECT_KNIGHT if (record->event.pressed) { - if ((21 <= rgblight_get_mode()) && (rgblight_get_mode() < 23)) { + if ((RGBLIGHT_MODE_KNIGHT <= rgblight_get_mode()) && + (rgblight_get_mode() < RGBLIGHT_MODE_KNIGHT_end)) { rgblight_step(); } else { - rgblight_mode(21); + rgblight_mode(RGBLIGHT_MODE_KNIGHT); } } + #endif return false; case RGB_MODE_XMAS: + #ifdef RGBLIGHT_EFFECT_CHRISTMAS if (record->event.pressed) { - rgblight_mode(24); + rgblight_mode(RGBLIGHT_MODE_CHRISTMAS); } + #endif return false; case RGB_MODE_GRADIENT: + #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT if (record->event.pressed) { - if ((25 <= rgblight_get_mode()) && (rgblight_get_mode() < 34)) { + if ((RGBLIGHT_MODE_STATIC_GRADIENT <= rgblight_get_mode()) && + (rgblight_get_mode() < RGBLIGHT_MODE_STATIC_GRADIENT_end)) { rgblight_step(); } else { - rgblight_mode(25); + rgblight_mode(RGBLIGHT_MODE_STATIC_GRADIENT); } } + #endif return false; case RGB_MODE_RGBTEST: + #ifdef RGBLIGHT_EFFECT_RGB_TEST if (record->event.pressed) { - rgblight_mode(35); + rgblight_mode(RGBLIGHT_MODE_RGB_TEST); } + #endif return false; #endif // defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) - #ifdef PROTOCOL_LUFA + #ifdef VELOCIKEY_ENABLE + case VLK_TOG: + if (record->event.pressed) { + velocikey_toggle(); + } + return false; + #endif + #ifdef PROTOCOL_LUFA case OUT_AUTO: if (record->event.pressed) { set_output(OUTPUT_AUTO); @@ -606,6 +635,17 @@ bool process_record_quantum(keyrecord_t *record) { PLAY_SONG(ag_norm_song); #endif break; + case MAGIC_TOGGLE_ALT_GUI: + keymap_config.swap_lalt_lgui = !keymap_config.swap_lalt_lgui; + keymap_config.swap_ralt_rgui = !keymap_config.swap_ralt_rgui; + #ifdef AUDIO_ENABLE + if (keymap_config.swap_ralt_rgui) { + PLAY_SONG(ag_swap_song); + } else { + PLAY_SONG(ag_norm_song); + } + #endif + break; case MAGIC_TOGGLE_NKRO: keymap_config.nkro = !keymap_config.nkro; break; @@ -618,66 +658,6 @@ bool process_record_quantum(keyrecord_t *record) { return false; } break; - case KC_LSPO: { - if (record->event.pressed) { - shift_interrupted[0] = false; - scs_timer[0] = timer_read (); - register_mods(MOD_BIT(KC_LSFT)); - } - else { - #ifdef DISABLE_SPACE_CADET_ROLLOVER - if (get_mods() & MOD_BIT(KC_RSFT)) { - shift_interrupted[0] = true; - shift_interrupted[1] = true; - } - #endif - if (!shift_interrupted[0] && timer_elapsed(scs_timer[0]) < TAPPING_TERM) { - register_code(LSPO_KEY); - unregister_code(LSPO_KEY); - } - unregister_mods(MOD_BIT(KC_LSFT)); - } - return false; - } - - case KC_RSPC: { - if (record->event.pressed) { - shift_interrupted[1] = false; - scs_timer[1] = timer_read (); - register_mods(MOD_BIT(KC_RSFT)); - } - else { - #ifdef DISABLE_SPACE_CADET_ROLLOVER - if (get_mods() & MOD_BIT(KC_LSFT)) { - shift_interrupted[0] = true; - shift_interrupted[1] = true; - } - #endif - if (!shift_interrupted[1] && timer_elapsed(scs_timer[1]) < TAPPING_TERM) { - register_code(RSPC_KEY); - unregister_code(RSPC_KEY); - } - unregister_mods(MOD_BIT(KC_RSFT)); - } - return false; - } - - case KC_SFTENT: { - if (record->event.pressed) { - shift_interrupted[1] = false; - scs_timer[1] = timer_read (); - register_mods(MOD_BIT(KC_RSFT)); - } - else if (!shift_interrupted[1] && timer_elapsed(scs_timer[1]) < TAPPING_TERM) { - unregister_mods(MOD_BIT(KC_RSFT)); - register_code(SFTENT_KEY); - unregister_code(SFTENT_KEY); - } - else { - unregister_mods(MOD_BIT(KC_RSFT)); - } - return false; - } case GRAVE_ESC: { uint8_t shifted = get_mods() & ((MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT) @@ -727,28 +707,24 @@ bool process_record_quantum(keyrecord_t *record) { #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING) case BL_BRTG: { - if (record->event.pressed) + if (record->event.pressed) { breathing_toggle(); + } return false; } #endif - - default: { - shift_interrupted[0] = true; - shift_interrupted[1] = true; - break; - } } return process_action_kb(record); } __attribute__ ((weak)) -const bool ascii_to_shift_lut[0x80] PROGMEM = { +const bool ascii_to_shift_lut[128] PROGMEM = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, @@ -764,23 +740,61 @@ const bool ascii_to_shift_lut[0x80] PROGMEM = { }; __attribute__ ((weak)) -const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = { +const bool ascii_to_altgr_lut[128] PROGMEM = { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, KC_ESC, 0, 0, 0, 0, - KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT, - KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH, - KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, - KC_8, KC_9, KC_SCLN, KC_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH, - KC_2, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, - KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, - KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W, - KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS, - KC_GRV, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, - KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, - KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W, - KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL + + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +__attribute__ ((weak)) +const uint8_t ascii_to_keycode_lut[128] PROGMEM = { + // NUL SOH STX ETX EOT ENQ ACK BEL + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + // BS TAB LF VT FF CR SO SI + KC_BSPC, KC_TAB, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + // DLE DC1 DC2 DC3 DC4 NAK SYN ETB + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + // CAN EM SUB ESC FS GS RS US + XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + // ! " # $ % & ' + KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT, + // ( ) * + , - . / + KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH, + // 0 1 2 3 4 5 6 7 + KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, + // 8 9 : ; < = > ? + KC_8, KC_9, KC_SCLN, KC_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH, + // @ A B C D E F G + KC_2, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, + // H I J K L M N O + KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, + // P Q R S T U V W + KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W, + // X Y Z [ \ ] ^ _ + KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS, + // ` a b c d e f g + KC_GRV, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G, + // h i j k l m n o + KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O, + // p q r s t u v w + KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W, + // x y z { | } ~ DEL + KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL }; void send_string(const char *str) { @@ -795,16 +809,16 @@ void send_string_with_delay(const char *str, uint8_t interval) { while (1) { char ascii_code = *str; if (!ascii_code) break; - if (ascii_code == 1) { + if (ascii_code == SS_TAP_CODE) { // tap uint8_t keycode = *(++str); register_code(keycode); unregister_code(keycode); - } else if (ascii_code == 2) { + } else if (ascii_code == SS_DOWN_CODE) { // down uint8_t keycode = *(++str); register_code(keycode); - } else if (ascii_code == 3) { + } else if (ascii_code == SS_UP_CODE) { // up uint8_t keycode = *(++str); unregister_code(keycode); @@ -821,16 +835,16 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { while (1) { char ascii_code = pgm_read_byte(str); if (!ascii_code) break; - if (ascii_code == 1) { + if (ascii_code == SS_TAP_CODE) { // tap uint8_t keycode = pgm_read_byte(++str); register_code(keycode); unregister_code(keycode); - } else if (ascii_code == 2) { + } else if (ascii_code == SS_DOWN_CODE) { // down uint8_t keycode = pgm_read_byte(++str); register_code(keycode); - } else if (ascii_code == 3) { + } else if (ascii_code == SS_UP_CODE) { // up uint8_t keycode = pgm_read_byte(++str); unregister_code(keycode); @@ -844,16 +858,22 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { } void send_char(char ascii_code) { - uint8_t keycode; - keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); - if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { - register_code(KC_LSFT); - register_code(keycode); - unregister_code(keycode); - unregister_code(KC_LSFT); - } else { - register_code(keycode); - unregister_code(keycode); + uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); + bool is_shifted = pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code]); + bool is_altgred = pgm_read_byte(&ascii_to_altgr_lut[(uint8_t)ascii_code]); + + if (is_shifted) { + register_code(KC_LSFT); + } + if (is_altgred) { + register_code(KC_RALT); + } + tap_code(keycode); + if (is_altgred) { + unregister_code(KC_RALT); + } + if (is_shifted) { + unregister_code(KC_LSFT); } } @@ -913,9 +933,48 @@ void tap_random_base64(void) { } } +__attribute__((weak)) +void bootmagic_lite(void) { + // The lite version of TMK's bootmagic based on Wilba. + // 100% less potential for accidentally making the + // keyboard do stupid things. + + // We need multiple scans because debouncing can't be turned off. + matrix_scan(); + #if defined(DEBOUNCING_DELAY) && DEBOUNCING_DELAY > 0 + wait_ms(DEBOUNCING_DELAY * 2); + #elif defined(DEBOUNCE) && DEBOUNCE > 0 + wait_ms(DEBOUNCE * 2); + #else + wait_ms(30); + #endif + matrix_scan(); + + // If the Esc and space bar are held down on power up, + // reset the EEPROM valid state and jump to bootloader. + // Assumes Esc is at [0,0]. + // This isn't very generalized, but we need something that doesn't + // rely on user's keymaps in firmware or EEPROM. + if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) { + eeconfig_disable(); + // Jump to bootloader. + bootloader_jump(); + } +} + void matrix_init_quantum() { + #ifdef BOOTMAGIC_LITE + bootmagic_lite(); + #endif + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } #ifdef BACKLIGHT_ENABLE - backlight_init_ports(); + #ifdef LED_MATRIX_ENABLE + led_matrix_init(); + #else + backlight_init_ports(); + #endif #endif #ifdef AUDIO_ENABLE audio_init(); @@ -923,15 +982,21 @@ void matrix_init_quantum() { #ifdef RGB_MATRIX_ENABLE rgb_matrix_init(); #endif + #ifdef ENCODER_ENABLE + encoder_init(); + #endif + #if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) + unicode_input_mode_init(); + #endif + #ifdef HAPTIC_ENABLE + haptic_init(); + #endif + #ifdef OUTPUT_AUTO_ENABLE + set_output(OUTPUT_AUTO); + #endif matrix_init_kb(); } -uint8_t rgb_matrix_task_counter = 0; - -#ifndef RGB_MATRIX_SKIP_FRAMES - #define RGB_MATRIX_SKIP_FRAMES 1 -#endif - void matrix_scan_quantum() { #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE) matrix_scan_music(); @@ -945,72 +1010,192 @@ void matrix_scan_quantum() { matrix_scan_combo(); #endif - #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN) - backlight_task(); + #if defined(BACKLIGHT_ENABLE) + #if defined(LED_MATRIX_ENABLE) + led_matrix_task(); + #elif defined(BACKLIGHT_PIN) + backlight_task(); + #endif #endif #ifdef RGB_MATRIX_ENABLE rgb_matrix_task(); - if (rgb_matrix_task_counter == 0) { - rgb_matrix_update_pwm_buffers(); - } - rgb_matrix_task_counter = ((rgb_matrix_task_counter + 1) % (RGB_MATRIX_SKIP_FRAMES + 1)); + #endif + + #ifdef ENCODER_ENABLE + encoder_read(); + #endif + + #ifdef HAPTIC_ENABLE + haptic_task(); #endif matrix_scan_kb(); } -#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN) +#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS)) -static const uint8_t backlight_pin = BACKLIGHT_PIN; +// The logic is a bit complex, we support 3 setups: +// 1. hardware PWM when backlight is wired to a PWM pin +// depending on this pin, we use a different output compare unit +// 2. software PWM with hardware timers, but the used timer depends +// on the audio setup (audio wins other backlight) +// 3. full software PWM -// depending on the pin, we use a different output compare unit #if BACKLIGHT_PIN == B7 +# define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1C1 # define OCRxx OCR1C +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B6 +# define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B5 +# define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1A1 # define OCRxx OCR1A +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == C6 +# define HARDWARE_PWM # define TCCRxA TCCR3A # define TCCRxB TCCR3B -# define COMxx1 COM1A1 +# define COMxx1 COM3A1 # define OCRxx OCR3A +# define TIMERx_OVF_vect TIMER3_OVF_vect +# define TOIEx TOIE3 # define ICRx ICR3 +# define TIMSKx TIMSK3 +#elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4 +# define TCCRxA TCCR1A +# define TCCRxB TCCR1B +# define COMxx1 COM1B1 +# define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 +# define ICRx ICR1 +# define TIMSKx TIMSK1 #else -# define NO_HARDWARE_PWM +# if !defined(BACKLIGHT_CUSTOM_DRIVER) +# if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO) + // timer 1 is not used by audio , backlight can use it +#pragma message "Using hardware timer 1 with software PWM" +# define HARDWARE_PWM +# define BACKLIGHT_PWM_TIMER +# define TCCRxA TCCR1A +# define TCCRxB TCCR1B +# define OCRxx OCR1A +# define TIMERx_COMPA_vect TIMER1_COMPA_vect +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define OCIExA OCIE1A +# define TOIEx TOIE1 +# define ICRx ICR1 +# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register +# define TIMSKx TIMSK +# else +# define TIMSKx TIMSK1 +# endif +# elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO) +#pragma message "Using hardware timer 3 with software PWM" +// timer 3 is not used by audio, backlight can use it +# define HARDWARE_PWM +# define BACKLIGHT_PWM_TIMER +# define TCCRxA TCCR3A +# define TCCRxB TCCR3B +# define OCRxx OCR3A +# define TIMERx_COMPA_vect TIMER3_COMPA_vect +# define TIMERx_OVF_vect TIMER3_OVF_vect +# define OCIExA OCIE3A +# define TOIEx TOIE3 +# define ICRx ICR1 +# define TIMSKx TIMSK3 +# else +#pragma message "Audio in use - using pure software PWM" +#define NO_HARDWARE_PWM +# endif +# else +#pragma message "Custom driver defined - using pure software PWM" +#define NO_HARDWARE_PWM +# endif #endif #ifndef BACKLIGHT_ON_STATE #define BACKLIGHT_ON_STATE 0 #endif -#ifdef NO_HARDWARE_PWM // pwm through software +void backlight_on(uint8_t backlight_pin) { +#if BACKLIGHT_ON_STATE == 0 + writePinLow(backlight_pin); +#else + writePinHigh(backlight_pin); +#endif +} + +void backlight_off(uint8_t backlight_pin) { +#if BACKLIGHT_ON_STATE == 0 + writePinHigh(backlight_pin); +#else + writePinLow(backlight_pin); +#endif +} -__attribute__ ((weak)) + +#if defined(NO_HARDWARE_PWM) || defined(BACKLIGHT_PWM_TIMER) // pwm through software + +// we support multiple backlight pins +#ifndef BACKLIGHT_LED_COUNT +#define BACKLIGHT_LED_COUNT 1 +#endif + +#if BACKLIGHT_LED_COUNT == 1 +#define BACKLIGHT_PIN_INIT { BACKLIGHT_PIN } +#else +#define BACKLIGHT_PIN_INIT BACKLIGHT_PINS +#endif + +#define FOR_EACH_LED(x) \ + for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) \ + { \ + uint8_t backlight_pin = backlight_pins[i]; \ + { \ + x \ + } \ + } + +static const uint8_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT; + +#else // full hardware PWM + +// we support only one backlight pin +static const uint8_t backlight_pin = BACKLIGHT_PIN; +#define FOR_EACH_LED(x) x + +#endif + +#ifdef NO_HARDWARE_PWM +__attribute__((weak)) void backlight_init_ports(void) { // Setup backlight pin as output and output to on state. - // DDRx |= n - _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF); - #if BACKLIGHT_ON_STATE == 0 - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #else - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #endif + FOR_EACH_LED( + setPinOutput(backlight_pin); + backlight_on(backlight_pin); + ) } __attribute__ ((weak)) @@ -1021,21 +1206,14 @@ uint8_t backlight_tick = 0; #ifndef BACKLIGHT_CUSTOM_DRIVER void backlight_task(void) { if ((0xFFFF >> ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) { - #if BACKLIGHT_ON_STATE == 0 - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #else - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #endif - } else { - #if BACKLIGHT_ON_STATE == 0 - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #else - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #endif + FOR_EACH_LED( + backlight_on(backlight_pin); + ) + } + else { + FOR_EACH_LED( + backlight_off(backlight_pin); + ) } backlight_tick = (backlight_tick + 1) % 16; } @@ -1047,7 +1225,54 @@ void backlight_task(void) { #endif #endif -#else // pwm through timer +#else // hardware pwm through timer + +#ifdef BACKLIGHT_PWM_TIMER + +// The idea of software PWM assisted by hardware timers is the following +// we use the hardware timer in fast PWM mode like for hardware PWM, but +// instead of letting the Output Match Comparator control the led pin +// (which is not possible since the backlight is not wired to PWM pins on the +// CPU), we do the LED on/off by oursleves. +// The timer is setup to count up to 0xFFFF, and we set the Output Compare +// register to the current 16bits backlight level (after CIE correction). +// This means the CPU will trigger a compare match interrupt when the counter +// reaches the backlight level, where we turn off the LEDs, +// but also an overflow interrupt when the counter rolls back to 0, +// in which we're going to turn on the LEDs. +// The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz. + +// Triggered when the counter reaches the OCRx value +ISR(TIMERx_COMPA_vect) { + FOR_EACH_LED( + backlight_off(backlight_pin); + ) +} + +// Triggered when the counter reaches the TOP value +// this one triggers at F_CPU/65536 =~ 244 Hz +ISR(TIMERx_OVF_vect) { +#ifdef BACKLIGHT_BREATHING + if(is_breathing()) { + breathing_task(); + } +#endif + // for very small values of OCRxx (or backlight level) + // we can't guarantee this whole code won't execute + // at the same time as the compare match interrupt + // which means that we might turn on the leds while + // trying to turn them off, leading to flickering + // artifacts (especially while breathing, because breathing_task + // takes many computation cycles). + // so better not turn them on while the counter TOP is very low. + if (OCRxx > 256) { + FOR_EACH_LED( + backlight_on(backlight_pin); + ) + } +} + +#endif #define TIMER_TOP 0xFFFFU @@ -1079,11 +1304,28 @@ void backlight_set(uint8_t level) { level = BACKLIGHT_LEVELS; if (level == 0) { + #ifdef BACKLIGHT_PWM_TIMER + if (OCRxx) { + TIMSKx &= ~(_BV(OCIExA)); + TIMSKx &= ~(_BV(TOIEx)); + FOR_EACH_LED( + backlight_off(backlight_pin); + ) + } + #else // Turn off PWM control on backlight pin TCCRxA &= ~(_BV(COMxx1)); + #endif } else { + #ifdef BACKLIGHT_PWM_TIMER + if (!OCRxx) { + TIMSKx |= _BV(OCIExA); + TIMSKx |= _BV(TOIEx); + } + #else // Turn on PWM control of backlight pin TCCRxA |= _BV(COMxx1); + #endif } // Set the brightness set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS)); @@ -1103,12 +1345,25 @@ static uint8_t breathing_period = BREATHING_PERIOD; static uint8_t breathing_halt = BREATHING_NO_HALT; static uint16_t breathing_counter = 0; +#ifdef BACKLIGHT_PWM_TIMER +static bool breathing = false; + +bool is_breathing(void) { + return breathing; +} + +#define breathing_interrupt_enable() do { breathing = true; } while (0) +#define breathing_interrupt_disable() do { breathing = false; } while (0) +#else + bool is_breathing(void) { - return !!(TIMSK1 & _BV(TOIE1)); + return !!(TIMSKx & _BV(TOIEx)); } -#define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0) -#define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0) +#define breathing_interrupt_enable() do {TIMSKx |= _BV(TOIEx);} while (0) +#define breathing_interrupt_disable() do {TIMSKx &= ~_BV(TOIEx);} while (0) +#endif + #define breathing_min() do {breathing_counter = 0;} while (0) #define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) @@ -1182,10 +1437,14 @@ static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); } +#ifdef BACKLIGHT_PWM_TIMER +void breathing_task(void) +#else /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run * about 244 times per second. */ -ISR(TIMER1_OVF_vect) +ISR(TIMERx_OVF_vect) +#endif { uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; // resetting after one period to prevent ugly reset at overflow. @@ -1207,19 +1466,21 @@ __attribute__ ((weak)) void backlight_init_ports(void) { // Setup backlight pin as output and output to on state. - // DDRx |= n - _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF); - #if BACKLIGHT_ON_STATE == 0 - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #else - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #endif + FOR_EACH_LED( + setPinOutput(backlight_pin); + backlight_on(backlight_pin); + ) + // I could write a wall of text here to explain... but TL;DW // Go read the ATmega32u4 datasheet. // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on +#ifdef BACKLIGHT_PWM_TIMER + // TimerX setup, Fast PWM mode count to TOP set in ICRx + TCCRxA = _BV(WGM11); // = 0b00000010; + // clock select clk/1 + TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; +#else // hardware PWM // Pin PB7 = OCR1C (Timer 1, Channel C) // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 // (i.e. start high, go low when counter matches.) @@ -1231,8 +1492,9 @@ void backlight_init_ports(void) "In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]." "In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)." */ - TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010; + TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010; TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; +#endif // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0. ICRx = TIMER_TOP; @@ -1242,9 +1504,9 @@ void backlight_init_ports(void) #endif } -#endif // NO_HARDWARE_PWM +#endif // hardware backlight -#else // backlight +#else // no backlight __attribute__ ((weak)) void backlight_init_ports(void) {} @@ -1338,22 +1600,23 @@ void led_init_ports(void) __attribute__ ((weak)) void led_set(uint8_t usb_led) { +#if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE) + // Use backlight as Caps Lock indicator + uint8_t bl_toggle_lvl = 0; + + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK) && !backlight_config.enable) { + // Turning Caps Lock ON and backlight is disabled in config + // Toggling backlight to the brightest level + bl_toggle_lvl = BACKLIGHT_LEVELS; + } else if (IS_LED_OFF(usb_led, USB_LED_CAPS_LOCK) && backlight_config.enable) { + // Turning Caps Lock OFF and backlight is enabled in config + // Toggling backlight and restoring config level + bl_toggle_lvl = backlight_config.level; + } - // Example LED Code - // - // // Using PE6 Caps Lock LED - // if (usb_led & (1<