From 5eca56fae0faa2db9cf7f12903e1a06c42b2af0d Mon Sep 17 00:00:00 2001 From: Walter Garcia-Fontes Date: Sat, 7 Feb 2015 20:00:15 +0100 Subject: [PATCH] Doc-ca: texinfo.tex and txi-ca from upstream to fix problem with Catalan interpunct --- tex/texinfo.tex | 816 ++++++++++++++++++++++++++++++++---------------- tex/txi-ca.tex | 4 +- 2 files changed, 543 insertions(+), 277 deletions(-) diff --git a/tex/texinfo.tex b/tex/texinfo.tex index 0b40cc27b6..8236d7d2f8 100644 --- a/tex/texinfo.tex +++ b/tex/texinfo.tex @@ -3,13 +3,12 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2012-07-03.16@LP} +\def\texinfoversion{2015-02-05.16} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007, 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. -% -% Modified version used in LilyPond, changed in 2012. +% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 +% Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -26,7 +25,8 @@ % % As a special exception, when this file is read by TeX when processing % a Texinfo source document, you may use the result without -% restriction. (This has been our intent since Texinfo was invented.) +% restriction. This Exception is an additional permission under section 7 +% of the GNU General Public License, version 3 ("GPLv3"). % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: @@ -97,7 +97,9 @@ \let\ptexraggedright=\raggedright \let\ptexrbrace=\} \let\ptexslash=\/ +\let\ptexsp=\sp \let\ptexstar=\* +\let\ptexsup=\sup \let\ptext=\t \let\ptextop=\top {\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode @@ -282,9 +284,9 @@ \toks6=\expandafter{\prevsectiondefs}% \toks8=\expandafter{\lastcolordefs}% \mark{% - \the\toks0 \the\toks2 - \noexpand\or \the\toks4 \the\toks6 - \noexpand\else \the\toks8 + \the\toks0 \the\toks2 % 0: top marks (\last...) + \noexpand\or \the\toks4 \the\toks6 % 1: bottom marks (default, \prev...) + \noexpand\else \the\toks8 % 2: color marks }% } % \topmark doesn't work for the very first chapter (after the title @@ -323,10 +325,13 @@ % % Do this outside of the \shipout so @code etc. will be expanded in % the headline as they should be, not taken literally (outputting ''code). + \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars} + % \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi - \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% + \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% + % \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi - \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% + \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}% % {% % Have to do this stuff outside the \shipout because we want it to @@ -596,7 +601,7 @@ \def\:{\spacefactor=1000 } % @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} +\def\*{\unskip\hfil\break\hbox{}\ignorespaces} % @/ allows a line break. \let\/=\allowbreak @@ -1008,24 +1013,15 @@ where each line of input produces a line of output.} % paragraph. % \gdef\dosuppressfirstparagraphindent{% - \gdef\indent{% - \restorefirstparagraphindent - \indent - }% - \gdef\noindent{% - \restorefirstparagraphindent - \noindent - }% - \global\everypar = {% - \kern -\parindent - \restorefirstparagraphindent - }% + \gdef\indent {\restorefirstparagraphindent \indent}% + \gdef\noindent{\restorefirstparagraphindent \noindent}% + \global\everypar = {\kern -\parindent \restorefirstparagraphindent}% } - +% \gdef\restorefirstparagraphindent{% - \global \let \indent = \ptexindent - \global \let \noindent = \ptexnoindent - \global \everypar = {}% + \global\let\indent = \ptexindent + \global\let\noindent = \ptexnoindent + \global\everypar = {}% } @@ -1136,10 +1132,12 @@ output) for that.)} \ifpdf % - % Color manipulation macros based on pdfcolor.tex, + % Color manipulation macros using ideas from pdfcolor.tex, % except using rgb instead of cmyk; the latter is said to render as a % very dark gray on-screen and a very dark halftone in print, instead - % of actual black. + % of actual black. The dark red here is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. We use + % black by default, though. \def\rgbDarkRed{0.50 0.09 0.12} \def\rgbBlack{0 0 0} % @@ -1249,10 +1247,9 @@ output) for that.)} % used to mark target names; must be expandable. \def\pdfmkpgn#1{#1} % - % by default, use a color that is dark enough to print on paper as - % nearly black, but still distinguishable for online viewing. - \def\urlcolor{\rgbDarkRed} - \def\linkcolor{\rgbDarkRed} + % by default, use black for everything. + \def\urlcolor{\rgbBlack} + \def\linkcolor{\rgbBlack} \def\endlink{\setcolor{\maincolor}\pdfendlink} % % Adding outlines to PDF; macros for calculating structure of outlines @@ -2087,12 +2084,9 @@ end \endgroup } - % In order for the font changes to affect most math symbols and letters, -% we have to define the \textfont of the standard families. Since -% texinfo doesn't allow for producing subscripts and superscripts except -% in the main text, we don't bother to reset \scriptfont and -% \scriptscriptfont (which would also require loading a lot more fonts). +% we have to define the \textfont of the standard families. We don't +% bother to reset \scriptfont and \scriptscriptfont; awaiting user need. % \def\resetmathfonts{% \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy @@ -2106,8 +2100,8 @@ end % \tenSTYLE to set the current font. % % Each font-changing command also sets the names \lsize (one size lower) -% and \lllsize (three sizes lower). These relative commands are used in -% the LaTeX logo and acronyms. +% and \lllsize (three sizes lower). These relative commands are used +% in, e.g., the LaTeX logo and acronyms. % % This all needs generalizing, badly. % @@ -2143,7 +2137,7 @@ end \let\tenttsl=\secttsl \def\curfontsize{sec}% \def\lsize{subsec}\def\lllsize{reduced}% - \resetmathfonts \setleading{16pt}} + \resetmathfonts \setleading{17pt}} \def\subsecfonts{% \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc @@ -2274,8 +2268,6 @@ end \gdef\markupsetcodequoteleft{\let`\codequoteleft} \gdef\markupsetcodequoteright{\let'\codequoteright} - -\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} } \let\markupsetuplqcode \markupsetcodequoteleft @@ -2284,6 +2276,9 @@ end \let\markupsetuplqexample \markupsetcodequoteleft \let\markupsetuprqexample \markupsetcodequoteright % +\let\markupsetuplqkbd \markupsetcodequoteleft +\let\markupsetuprqkbd \markupsetcodequoteright +% \let\markupsetuplqsamp \markupsetcodequoteleft \let\markupsetuprqsamp \markupsetcodequoteright % @@ -2293,8 +2288,6 @@ end \let\markupsetuplqverbatim \markupsetcodequoteleft \let\markupsetuprqverbatim \markupsetcodequoteright -\let\markupsetuplqkbd \markupsetnoligaturesquoteleft - % Allow an option to not use regular directed right quote/apostrophe % (char 0x27), but instead the undirected quote from cmtt (char 0x0d). % The undirected quote is ugly, so don't make it the default, but it @@ -2379,13 +2372,14 @@ end \ifx\next,% \else\ifx\next-% \else\ifx\next.% + \else\ifx\next\.% + \else\ifx\next\comma% \else\ptexslash - \fi\fi\fi + \fi\fi\fi\fi\fi \aftersmartic } -% like \smartslanted except unconditionally uses \ttsl, and no ic. -% @var is set to this for defun arguments. +% Unconditional use \ttsl, and no ic. @var is set to this for defuns. \def\ttslanted#1{{\ttsl #1}} % @cite is like \smartslanted except unconditionally use \sl. We never want @@ -2450,34 +2444,12 @@ end % @samp. \def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} -% definition of @key that produces a lozenge. Doesn't adjust to text size. -%\setfont\keyrm\rmshape{8}{1000}{OT1} -%\font\keysy=cmsy9 -%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% -% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% -% \vbox{\hrule\kern-0.4pt -% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% -% \kern-0.4pt\hrule}% -% \kern-.06em\raise0.4pt\hbox{\angleright}}}} +% @indicateurl is \samp, that is, with quotes. +\let\indicateurl=\samp -% definition of @key with no lozenge. If the current font is already -% monospace, don't change it; that way, we respect @kbdinputstyle. But -% if it isn't monospace, then use \tt. -% -\def\key#1{{\setupmarkupstyle{key}% - \nohyphenation - \ifmonospace\else\tt\fi - #1}\null} - -% ctrl is no longer a Texinfo command. -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -% @file, @option are the same as @samp. -\let\file=\samp -\let\option=\samp - -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. +% @code (and similar) prints in typewriter, but with spaces the same +% size as normal in the surrounding text, without hyphenation, etc. +% This is a subroutine for that. \def\tclose#1{% {% % Change normal interword space to be same as for the current font. @@ -2500,14 +2472,14 @@ end } % We *must* turn on hyphenation at `-' and `_' in @code. +% (But see \codedashfinish below.) % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. - +% % Unfortunately, TeX uses one parameter (\hyphenchar) to control % both hyphenation at - and hyphenation within words. % We must therefore turn them both off (\tclose does that) -% and arrange explicitly to hyphenate at a dash. -% -- rms. +% and arrange explicitly to hyphenate at a dash. -- rms. { \catcode`\-=\active \catcode`\_=\active \catcode`\'=\active \catcode`\`=\active @@ -2521,17 +2493,38 @@ end \let-\codedash \let_\codeunder \else - \let-\realdash + \let-\normaldash \let_\realunder \fi + % Given -foo (with a single dash), we do not want to allow a break + % after the hyphen. + \global\let\codedashprev=\codedash + % \codex } + % + \gdef\codedash{\futurelet\next\codedashfinish} + \gdef\codedashfinish{% + \normaldash % always output the dash character itself. + % + % Now, output a discretionary to allow a line break, unless + % (a) the next character is a -, or + % (b) the preceding character is a -. + % E.g., given --posix, we do not want to allow a break after either -. + % Given --foo-bar, we do want to allow a break between the - and the b. + \ifx\next\codedash \else + \ifx\codedashprev\codedash + \else \discretionary{}{}{}\fi + \fi + % we need the space after the = for the case when \next itself is a + % space token; it would get swallowed otherwise. As in @code{- a}. + \global\let\codedashprev= \next + } } - +\def\normaldash{-} +% \def\codex #1{\tclose{#1}\endgroup} -\def\realdash{-} -\def\codedash{-\discretionary{}{}{}} \def\codeunder{% % this is all so @math{@code{var_name}+1} can work. In math mode, _ % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) @@ -2545,9 +2538,9 @@ end } % An additional complication: the above will allow breaks after, e.g., -% each of the four underscores in __typeof__. This is undesirable in -% some manuals, especially if they don't have long identifiers in -% general. @allowcodebreaks provides a way to control this. +% each of the four underscores in __typeof__. This is bad. +% @allowcodebreaks provides a document-level way to turn breaking at - +% and _ on and off. % \newif\ifallowcodebreaks \allowcodebreakstrue @@ -2566,37 +2559,28 @@ end \fi\fi } -% @uref (abbreviation for `urlref') takes an optional (comma-separated) -% second argument specifying the text to display and an optional third -% arg as text to display instead of (rather than in addition to) the url -% itself. First (mandatory) arg is the url. -% (This \urefnobreak definition isn't used now, leaving it for a while -% for comparison.) -\def\urefnobreak#1{\dourefnobreak #1,,,\finish} -\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup - \unsepspaces - \pdfurl{#1}% - \setbox0 = \hbox{\ignorespaces #3}% - \ifdim\wd0 > 0pt - \unhbox0 % third arg given, show only that - \else - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0 > 0pt - \ifpdf - \unhbox0 % PDF: 2nd arg given, show only it - \else - \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url - \fi - \else - \code{#1}% only url given, so show it - \fi - \fi - \endlink -\endgroup} +% For @command, @env, @file, @option quotes seem unnecessary, +% so use \code rather than \samp. +\let\command=\code +\let\env=\code +\let\file=\code +\let\option=\code + +% @uref (abbreviation for `urlref') aka @url takes an optional +% (comma-separated) second argument specifying the text to display and +% an optional third arg as text to display instead of (rather than in +% addition to) the url itself. First (mandatory) arg is the url. + +% TeX-only option to allow changing PDF output to show only the second +% arg (if given), and not the url (which is then just the link target). +\newif\ifurefurlonlylink -% This \urefbreak definition is the active one. +% The main macro is \urefbreak, which allows breaking at expected +% places within the url. (There used to be another version, which +% didn't support automatic breaking.) \def\urefbreak{\begingroup \urefcatcodes \dourefbreak} \let\uref=\urefbreak +% \def\dourefbreak#1{\urefbreakfinish #1,,,\finish} \def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example \unsepspaces @@ -2605,12 +2589,19 @@ end \ifdim\wd0 > 0pt \unhbox0 % third arg given, show only that \else - \setbox0 = \hbox{\ignorespaces #2}% + \setbox0 = \hbox{\ignorespaces #2}% look for second arg \ifdim\wd0 > 0pt \ifpdf - \unhbox0 % PDF: 2nd arg given, show only it + \ifurefurlonlylink + % PDF plus option to not display url, show just arg + \unhbox0 + \else + % PDF, normally display both arg and url for consistency, + % visibility, if the pdf is eventually used to print, etc. + \unhbox0\ (\urefcode{#1})% + \fi \else - \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url + \unhbox0\ (\urefcode{#1})% DVI, always show arg and url \fi \else \urefcode{#1}% only url given, so show it @@ -2650,8 +2641,10 @@ end % we put a little stretch before and after the breakable chars, to help % line breaking of long url's. The unequal skips make look better in % cmtt at least, especially for dots. -\def\urefprestretch{\urefprebreak \hskip0pt plus.13em } -\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em } +\def\urefprestretchamount{.13em} +\def\urefpoststretchamount{.1em} +\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax} +\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax} % \def\urefcodeamp{\urefprestretch \&\urefpoststretch} \def\urefcodedot{\urefprestretch .\urefpoststretch} @@ -2712,10 +2705,6 @@ end \let\email=\uref \fi -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. -\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} - % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). @@ -2739,16 +2728,36 @@ end % Default is `distinct'. \kbdinputstyle distinct +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}} + \def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi -\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} +\def\kbdsub#1#2#3\par{% + \def\one{#1}\def\three{#3}\def\threex{??}% + \ifx\one\xkey\ifx\threex\three \key{#2}% + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +} -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code -\let\command=\code +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} % @clicksequence{File @click{} Open ...} \def\clicksequence#1{\begingroup #1\endgroup} @@ -2833,6 +2842,8 @@ end \let\v=\check \let\~=\tilde \let\dotaccent=\dot + % have to provide another name for sup operator + \let\mathopsup=\sup $\finishmath } \def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. @@ -2856,6 +2867,21 @@ end } } +% for @sub and @sup, if in math mode, just do a normal sub/superscript. +% If in text, use math to place as sub/superscript, but switch +% into text mode, with smaller fonts. This is a different font than the +% one used for real math sub/superscripts (8pt vs. 7pt), but let's not +% fix it (significant additions to font machinery) until someone notices. +% +\def\sub{\ifmmode \expandafter\sb \else \expandafter\finishsub\fi} +\def\finishsub#1{$\sb{\hbox{\selectfonts\lllsize #1}}$}% +% +\def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi} +\def\finishsup#1{$\ptexsp{\hbox{\selectfonts\lllsize #1}}$}% + +% ctrl is no longer a Texinfo command, but leave this definition for fun. +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. % Ignore unless FMTNAME == tex; then it is like @iftex and @tex, % except specified as a normal braced arg, so no newlines to worry about. @@ -2867,6 +2893,15 @@ end \def\inlinefmtname{#1}% \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi } +% +% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if +% FMTNAME is tex, else ELSE-TEXT. +\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish} +\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi +} +% % For raw, must switch into @tex before parsing the argument, to avoid % setting catcodes prematurely. Doing it this way means that, for % example, @inlineraw{html, foo{bar} gets a parse error instead of being @@ -2883,6 +2918,23 @@ end \endgroup % close group opened by \tex. } +% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set. +% +\long\def\inlineifset#1{\doinlineifset #1,\finish} +\long\def\doinlineifset#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax + \else\ignorespaces#2\fi +} + +% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set. +% +\long\def\inlineifclear#1{\doinlineifclear #1,\finish} +\long\def\doinlineifclear#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi +} + \message{glyphs,} % and logos. @@ -3146,12 +3198,17 @@ end % hopefully nobody will notice/care. \edef\ecsize{\csname\curfontsize ecsize\endcsname}% \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% - \ifx\curfontstyle\bfstylename - % bold: - \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \ifmonospace + % typewriter: + \font\thisecfont = ectt\ecsize \space at \nominalsize \else - % regular: - \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi \fi \thisecfont } @@ -3264,6 +3321,20 @@ end \finishedtitlepagetrue } +% Settings used for typesetting titles: no hyphenation, no indentation, +% don't worry much about spacing, ragged right. This should be used +% inside a \vbox, and fonts need to be set appropriately first. Because +% it is always used for titles, nothing else, we call \rmisbold. \par +% should be specified before the end of the \vbox, since a vbox is a group. +% +\def\raggedtitlesettings{% + \rmisbold + \hyphenpenalty=10000 + \parindent=0pt + \tolerance=5000 + \ptexraggedright +} + % Macros to be used within @titlepage: \let\subtitlerm=\tenrm @@ -3271,7 +3342,7 @@ end \parseargdef\title{% \checkenv\titlepage - \leftline{\titlefonts\rmisbold #1} + \vbox{\titlefonts \raggedtitlesettings #1\par}% % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt @@ -3619,7 +3690,7 @@ end \parskip=\smallskipamount \ifdim\parskip=0pt \parskip=2pt \fi % - % Try typesetting the item mark that if the document erroneously says + % Try typesetting the item mark so that if the document erroneously says % something like @itemize @samp (intending @table), there's an error % right away at the @itemize. It's not the best error message in the % world, but it's better than leaving it to the @item. This means if @@ -3869,19 +3940,23 @@ end } % multitable-only commands. -% -% @headitem starts a heading row, which we typeset in bold. -% Assignments have to be global since we are inside the implicit group -% of an alignment entry. \everycr resets \everytab so we don't have to +% +% @headitem starts a heading row, which we typeset in bold. Assignments +% have to be global since we are inside the implicit group of an +% alignment entry. \everycr below resets \everytab so we don't have to % undo it ourselves. \def\headitemfont{\b}% for people to use in the template row; not changeable \def\headitem{% \checkenv\multitable \crcr + \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings \global\everytab={\bf}% can't use \headitemfont since the parsing differs \the\everytab % for the first item }% % +% default for tables with no headings. +\let\headitemcrhook=\relax +% % A \tab used to include \hskip1sp. But then the space in a template % line is not enough. That is bad. So let's go back to just `&' until % we again encounter the problem the 1sp was intended to solve. @@ -3912,15 +3987,15 @@ end % \everycr = {% \noalign{% - \global\everytab={}% + \global\everytab={}% Reset from possible headitem. \global\colcount=0 % Reset the column counter. - % Check for saved footnotes, etc. + % + % Check for saved footnotes, etc.: \checkinserts - % Keeps underfull box messages off when table breaks over pages. - %\filbreak - % Maybe so, but it also creates really weird page breaks when the - % table breaks over pages. Wouldn't \vfil be better? Wait until the - % problem manifests itself, so it can be fixed for real --karl. + % + % Perhaps a \nobreak, then reset: + \headitemcrhook + \global\let\headitemcrhook=\relax }% }% % @@ -4159,7 +4234,7 @@ end \def\value{\begingroup\makevalueexpandable\valuexxx} \def\valuexxx#1{\expandablevalue{#1}\endgroup} { - \catcode`\- = \active \catcode`\_ = \active + \catcode`\-=\active \catcode`\_=\active % \gdef\makevalueexpandable{% \let\value = \expandablevalue @@ -4168,7 +4243,7 @@ end % ..., but we might end up with active ones in the argument if % we're called from @code, as @code{@value{foo-bar_}}, though. % So \let them to their normal equivalents. - \let-\realdash \let_\normalunderscore + \let-\normaldash \let_\normalunderscore } } @@ -4179,7 +4254,12 @@ end % variable's value contains other Texinfo commands, it's almost certain % it will fail (although perhaps we could fix that with sufficient work % to do a one-level expansion on the result, instead of complete). -% +% +% Unfortunately, this has the consequence that when _ is in the *value* +% of an @set, it does not print properly in the roman fonts (get the cmr +% dot accent at position 126 instead). No fix comes to mind, and it's +% been this way since 2003 or earlier, so just ignore it. +% \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax {[No value for ``#1'']}% @@ -4191,8 +4271,9 @@ end % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. -% -% To get special treatment of `@end ifset,' call \makeond and the redefine. +% +% To get the special treatment we need for `@end ifset,' we call +% \makecond and then redefine. % \makecond{ifset} \def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} @@ -4238,7 +4319,7 @@ end } \def\ifcmddefinedfail{\doignore{ifcommanddefined}} -% @ifcommandnotdefined CMD ... handlded similar to @ifclear above. +% @ifcommandnotdefined CMD ... handled similar to @ifclear above. \makecond{ifcommandnotdefined} \def\ifcommandnotdefined{% \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}} @@ -4356,7 +4437,7 @@ end % complicated, when \tex is in effect and \{ is a \delimiter again. % We can't use \lbracecmd and \rbracecmd because texindex assumes % braces and backslashes are used only as delimiters. Perhaps we - % should define @lbrace and @rbrace commands a la @comma. + % should use @lbracechar and @rbracechar? \def\{{{\tt\char123}}% \def\}{{\tt\char125}}% % @@ -4377,8 +4458,7 @@ end % @end macro % ... % @funindex commtest - % - % The above is not enough to reproduce the bug, but it gives the flavor. + % This is not enough to reproduce the bug, but it gives the flavor. % % Sample whatsit resulting: % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} @@ -4409,7 +4489,6 @@ end % Called from \indexdummies and \atdummies. % \def\commondummies{% - % % \definedummyword defines \#1 as \string\#1\space, thus effectively % preventing its expansion. This is used only for control words, % not control letters, because the \space would be incorrect for @@ -4486,6 +4565,7 @@ end \definedummyword\guilsinglright \definedummyword\lbracechar \definedummyword\leq + \definedummyword\mathopsup \definedummyword\minus \definedummyword\ogonek \definedummyword\pounds @@ -4499,6 +4579,8 @@ end \definedummyword\quotesinglbase \definedummyword\rbracechar \definedummyword\result + \definedummyword\sub + \definedummyword\sup \definedummyword\textdegree % % We want to disable all macros so that they are not expanded by \write. @@ -4573,14 +4655,28 @@ end \definedummyword\samp \definedummyword\strong \definedummyword\tie + \definedummyword\U \definedummyword\uref \definedummyword\url \definedummyword\var \definedummyword\verb \definedummyword\w \definedummyword\xref + % + % Consider: + % @macro mkind{arg1,arg2} + % @cindex \arg2\ + % @end macro + % @mkind{foo, bar} + % The space after the comma will end up in the temporary definition + % that we make for arg2 (see \parsemargdef ff.). We want all this to be + % expanded for the sake of the index, so we end up just seeing "bar". + \let\xeatspaces = \eatspaces } +% For testing: output @{ and @} in index sort strings as \{ and \}. +\newif\ifusebracesinindexes + % \indexnofonts is used when outputting the strings to sort the index % by, and when constructing control sequence names. It eliminates all % control sequences and just writes whatever the best ASCII sort string @@ -4609,11 +4705,16 @@ end % Unfortunately, texindex is not prepared to handle braces in the % content at all. So for index sorting, we map @{ and @} to strings % starting with |, since that ASCII character is between ASCII { and }. - \def\{{|a}% - \def\lbracechar{|a}% + \ifusebracesinindexes + \def\lbracechar{\lbracecmd}% + \def\rbracechar{\rbracecmd}% + \else + \def\lbracechar{|a}% + \def\rbracechar{|b}% + \fi + \let\{=\lbracechar + \let\}=\rbracechar % - \def\}{|b}% - \def\rbracechar{|b}% % % Non-English letters. \def\AA{AA}% @@ -5574,14 +5675,6 @@ end % Define @majorheading, @heading and @subheading -% NOTE on use of \vbox for chapter headings, section headings, and such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. -% 3) Likewise, headings look best if no \parindent is used, and -% if justification is not attempted. Hence \raggedright. - \def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% \parsearg\chapheadingzzz @@ -5589,10 +5682,8 @@ end \def\chapheading{\chapbreak \parsearg\chapheadingzzz} \def\chapheadingzzz#1{% - {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}% - \bigskip \par\penalty 200\relax + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip \nobreak \suppressfirstparagraphindent } @@ -5656,13 +5747,16 @@ end % % #1 is the text, #2 is the section type (Ynumbered, Ynothing, % Yappendix, Yomitfromtoc), #3 the chapter number. +% Not used for @heading series. % % To test against our argument. \def\Ynothingkeyword{Ynothing} -\def\Yomitfromtockeyword{Yomitfromtoc} \def\Yappendixkeyword{Yappendix} +\def\Yomitfromtockeyword{Yomitfromtoc} % \def\chapmacro#1#2#3{% + \checkenv{}% chapters, etc., should not start inside an environment. + % % Insert the first mark before the heading break (see notes for \domark). \let\prevchapterdefs=\lastchapterdefs \let\prevsectiondefs=\lastsectiondefs @@ -5715,6 +5809,7 @@ end % {% \chapfonts \rmisbold + \let\footnote=\errfootnoteheading % give better error message % % Have to define \lastsection before calling \donoderef, because the % xref code eventually uses it. On the other hand, it has to be called @@ -5751,8 +5846,7 @@ end % % Typeset the actual heading. \nobreak % Avoid page breaks at the interline glue. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright - \hangindent=\wd0 \centerparametersmaybe + \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title @@ -5774,18 +5868,18 @@ end \def\setchapterstyle #1 {\csname CHAPF#1\endcsname} % \def\unnchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\ptexraggedright - \rmisbold #1\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } \def\centerchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt - \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}% + \nobreak\bigskip \nobreak } \def\CHAPFopen{% \global\let\chapmacro=\chfopen @@ -5809,22 +5903,29 @@ end % Print any size, any type, section title. % -% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is -% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the -% section number. +% #1 is the text of the title, +% #2 is the section level (sec/subsec/subsubsec), +% #3 is the section type (Ynumbered, Ynothing, Yappendix, Yomitfromtoc), +% #4 is the section number. % \def\seckeyword{sec} % \def\sectionheading#1#2#3#4{% {% - \checkenv{}% should not be in an environment. + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + % It is ok for the @heading series commands to appear inside an + % environment (it's been historically allowed, though the logic is + % dubious), but not the others. + \ifx\temptype\Yomitfromtockeyword\else + \checkenv{}% non-@*heading should not be in an environment. + \fi + \let\footnote=\errfootnoteheading % % Switch to the right set of fonts. \csname #2fonts\endcsname \rmisbold % - \def\sectionlevel{#2}% - \def\temptype{#3}% - % % Insert first mark before the heading break (see notes for \domark). \let\prevsectiondefs=\lastsectiondefs \ifx\temptype\Ynothingkeyword @@ -5876,7 +5977,7 @@ end % % Now the second mark, after the heading break. No break points % between here and the heading. - \let\prevsectiondefs=\lastsectiondefs + \global\let\prevsectiondefs=\lastsectiondefs \domark % % Only insert the space after the number if we have a section number. @@ -6243,14 +6344,15 @@ end \catcode `\|=\other \catcode `\<=\other \catcode `\>=\other - \catcode`\`=\other - \catcode`\'=\other + \catcode `\`=\other + \catcode `\'=\other \escapechar=`\\ % % ' is active in math mode (mathcode"8000). So reset it, and all our % other math active characters (just in case), to plain's definitions. \mathactive % + % Inverse of the list at the beginning of the file. \let\b=\ptexb \let\bullet=\ptexbullet \let\c=\ptexc @@ -6266,9 +6368,11 @@ end \let\+=\tabalign \let\}=\ptexrbrace \let\/=\ptexslash + \let\sp=\ptexsp \let\*=\ptexstar + %\let\sup=\ptexsup % do not redefine, we want @sup to work in math mode \let\t=\ptext - \expandafter \let\csname top\endcsname=\ptextop % outer + \expandafter \let\csname top\endcsname=\ptextop % we've made it outer \let\frenchspacing=\plainfrenchspacing % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% @@ -6352,8 +6456,6 @@ end % side, and for 6pt waste from % each corner char, and rule thickness \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing = t% % % If this cartouche directly follows a sectioning command, we need the % \parskip glue (backspaced over by default) or the cartouche can @@ -6393,7 +6495,7 @@ end \newdimen\nonfillparindent \def\nonfillstart{% \aboveenvbreak - \hfuzz = 12pt % Don't be fussy + \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy \sepspaces % Make spaces be word-separators rather than space tokens. \let\par = \lisppar % don't ignore blank lines \obeylines % each line of input is a line of output @@ -6520,9 +6622,13 @@ end % @raggedright does more-or-less normal line breaking but no right -% justification. From plain.tex. +% justification. From plain.tex. Don't stretch around special +% characters in urls in this environment, since the stretch at the right +% should be enough. \envdef\raggedright{% - \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax + \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax + \def\urefprestretchamount{0pt}% + \def\urefpoststretchamount{0pt}% } \let\Eraggedright\par @@ -6551,16 +6657,9 @@ end \makedispenvdef{quotation}{\quotationstart} % \def\quotationstart{% - {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \parindent=0pt - % - % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \indentedblockstart % same as \indentedblock, but increase right margin too. \ifx\nonarrowing\relax - \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing - \exdentamount = \lispnarrowing - \else - \let\nonarrowing = \relax \fi \parsearg\quotationlabel } @@ -6586,6 +6685,32 @@ end \fi } +% @indentedblock is like @quotation, but indents only on the left and +% has no optional argument. +% +\makedispenvdef{indentedblock}{\indentedblockstart} +% +\def\indentedblockstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi +} + +% Keep a nonzero parskip for the environment, since we're doing normal filling. +% +\def\Eindentedblock{% + \par + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallindentedblock{\Eindentedblock} + % LaTeX-like @verbatim...@end verbatim and @verb{...} % If we want to allow any as delimiter, @@ -7064,7 +7189,10 @@ end \df \sl \hyphenchar\font=0 % % On the other hand, if an argument has two dashes (for instance), we - % want a way to get ttsl. Let's try @var for that. + % want a way to get ttsl. We used to recommend @var for that, so + % leave the code in, but it's strange for @var to lead to typewriter. + % Nowadays we recommend @code, since the difference between a ttsl hyphen + % and a tt hyphen is pretty tiny. @code also disables ?` !`. \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 @@ -7288,14 +7416,9 @@ end \usembodybackslash } -% LilyPond CHANGE: The following definition has been reverted to the -% original definition since it was problematic in the context of -% indexing. - \def\macroargctxt{% used when scanning invocations \scanctxt -% \catcode`\\=0 - \catcode`\\=\other + \catcode`\\=0 } % why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes" % for the single characters \ { }. Thus, we end up with the "commands" @@ -7313,7 +7436,6 @@ end % % \anythingelse will almost certainly be an error of some kind. - % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N % where N is the macro parameter number. @@ -7398,7 +7520,7 @@ end % Parse the optional {params} list. Set up \paramno and \paramlist % so \defmacro knows what to do. Define \macarg.BLAH for each BLAH -% in the params list to some hook where the argument si to be expanded. If +% in the params list to some hook where the argument is to be expanded. If % there are less than 10 arguments that hook is to be replaced by ##N where N % is the position in that list, that is to say the macro arguments are to be % defined `a la TeX in the macro body. @@ -7422,8 +7544,7 @@ end % the catcode regime underwhich the body was input). % % If you compile with TeX (not eTeX), and you have macros with 10 or more -% arguments, you need that no macro has more than 256 arguments, otherwise an -% error is produced. +% arguments, no macro can have more than 256 arguments (else error). \def\parsemargdef#1;{% \paramno=0\def\paramlist{}% \let\hash\relax @@ -8217,14 +8338,7 @@ end \catcode`\\=\other % % Make the characters 128-255 be printing characters. - {% - \count1=128 - \def\loop{% - \catcode\count1=\other - \advance\count1 by 1 - \ifnum \count1<256 \loop \fi - }% - }% + {\setnonasciicharscatcodenonglobal\other}% % % @ is our escape character in .aux files, and we need braces. \catcode`\{=1 @@ -8258,8 +8372,6 @@ end % % Auto-number footnotes. Otherwise like plain. \gdef\footnote{% - \let\indent=\ptexindent - \let\noindent=\ptexnoindent \global\advance\footnoteno by \@ne \edef\thisfootno{$^{\the\footnoteno}$}% % @@ -8283,6 +8395,11 @@ end % \gdef\dofootnote{% \insert\footins\bgroup + % + % Nested footnotes are not supported in TeX, that would take a lot + % more work. (\startsavinginserts does not suffice.) + \let\footnote=\errfootnotenest + % % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. @@ -8320,13 +8437,24 @@ end } }%end \catcode `\@=11 +\def\errfootnotenest{% + \errhelp=\EMsimple + \errmessage{Nested footnotes not supported in texinfo.tex, + even though they work in makeinfo; sorry} +} + +\def\errfootnoteheading{% + \errhelp=\EMsimple + \errmessage{Footnotes in chapters, sections, etc., are not supported} +} + % In case a @footnote appears in a vbox, save the footnote text and create % the real \insert just after the vbox finished. Otherwise, the insertion % would be lost. % Similarly, if a @footnote appears inside an alignment, save the footnote % text to a box and make the \insert when a row of the table is finished. % And the same can be done for other insert classes. --kasal, 16nov03. - +% % Replace the \insert primitive by a cheating macro. % Deeper inside, just make sure that the saved insertions are not spilled % out prematurely. @@ -8743,20 +8871,20 @@ end { \catcode`\_ = \active \globaldefs=1 -\parseargdef\documentlanguage{\begingroup - \let_=\normalunderscore % normal _ character for filenames +\parseargdef\documentlanguage{% \tex % read txi-??.tex file in plain TeX. % Read the file by the name they passed if it exists. + \let_ = \normalunderscore % normal _ character for filename test \openin 1 txi-#1.tex \ifeof 1 - \documentlanguagetrywithoutunderscore{#1_\finish}% + \documentlanguagetrywithoutunderscore #1_\finish \else \globaldefs = 1 % everything in the txi-LL files needs to persist \input txi-#1.tex \fi \closein 1 \endgroup % end raw TeX -\endgroup} +} % % If they passed de_DE, and txi-de_DE.tex doesn't exist, % try txi-de.tex. @@ -8821,6 +8949,7 @@ directory should work if nowhere else does.} \catcode\count255=#1\relax \advance\count255 by 1 \repeat + } % @documentencoding sets the definition of non-ASCII characters @@ -8855,10 +8984,12 @@ directory should work if nowhere else does.} % \else \ifx \declaredencoding \utfeight \setnonasciicharscatcode\active - \utfeightchardefs + % since we already invoked \utfeightchardefs at the top level + % (below), do not re-invoke it, then our check for duplicated + % definitions triggers. Making non-ascii chars active is enough. % \else - \message{Unknown document encoding #1, ignoring.}% + \message{Ignoring unknown document encoding: #1.}% % \fi % utfeight \fi % latnine @@ -8867,10 +8998,11 @@ directory should work if nowhere else does.} \fi % ascii } +% emacs-page % A message to be logged when using a character that isn't available % the default font encoding (OT1). % -\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} +\def\missingcharmsg#1{\message{Character missing, sorry: #1.}} % Take account of \c (plain) vs. \, (Texinfo) difference. \def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} @@ -8906,12 +9038,10 @@ directory should work if nowhere else does.} \gdef^^b4{\'{}} \gdef^^b5{$\mu$} \gdef^^b6{\P} - % - \gdef^^b7{$^.$} + \gdef^^b7{\ifmmode\cdot\else $\cdot$\fi} \gdef^^b8{\cedilla\ } \gdef^^b9{$^1$} \gdef^^ba{\ordm} - % \gdef^^bb{\guillemetright} \gdef^^bc{$1\over4$} \gdef^^bd{$1\over2$} @@ -9166,6 +9296,18 @@ directory should work if nowhere else does.} \UTFviiiLoop \endgroup +\def\globallet{\global\let} % save some \expandafter's below + +% @U{xxxx} to produce U+xxxx, if we support it. +\def\U#1{% + \expandafter\ifx\csname uni:#1\endcsname \relax + \errhelp = \EMsimple + \errmessage{Unicode character U+#1 not supported, sorry}% + \else + \csname uni:#1\endcsname + \fi +} + \begingroup \catcode`\"=12 \catcode`\<=12 @@ -9174,7 +9316,6 @@ directory should work if nowhere else does.} \catcode`\;=12 \catcode`\!=12 \catcode`\~=13 - \gdef\DeclareUnicodeCharacter#1#2{% \countUTFz = "#1\relax %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% @@ -9189,6 +9330,13 @@ directory should work if nowhere else does.} \expandafter\expandafter\expandafter\expandafter \expandafter\expandafter\expandafter \gdef\UTFviiiTmp{#2}% + % + \expandafter\ifx\csname uni:#1\endcsname \relax \else + \errmessage{Internal error, already defined: #1}% + \fi + % + % define an additional control sequence for this code point. + \expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp \endgroup} \gdef\parseXMLCharref{% @@ -9226,23 +9374,49 @@ directory should work if nowhere else does.} \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} \endgroup +% https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_M +% U+0000..U+007F = https://en.wikipedia.org/wiki/Basic_Latin_(Unicode_block) +% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block) +% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A +% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B +% +% Many of our renditions are less than wonderful, and all the missing +% characters are available somewhere. Loading the necessary fonts +% awaits user request. We can't truly support Unicode without +% reimplementing everything that's been done in LaTeX for many years, +% plus probably using luatex or xetex, and who knows what else. +% We won't be doing that here in this simple file. But we can try to at +% least make most of the characters not bomb out. +% \def\utfeightchardefs{% \DeclareUnicodeCharacter{00A0}{\tie} \DeclareUnicodeCharacter{00A1}{\exclamdown} \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A7}{\S} \DeclareUnicodeCharacter{00A8}{\"{ }} \DeclareUnicodeCharacter{00A9}{\copyright} \DeclareUnicodeCharacter{00AA}{\ordf} \DeclareUnicodeCharacter{00AB}{\guillemetleft} + \DeclareUnicodeCharacter{00AC}{\ifmmode\lnot\else $\lnot$\fi} \DeclareUnicodeCharacter{00AD}{\-} \DeclareUnicodeCharacter{00AE}{\registeredsymbol} \DeclareUnicodeCharacter{00AF}{\={ }} \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B1}{\ifmmode\pm\else $\pm$\fi} + \DeclareUnicodeCharacter{00B2}{$^2$} + \DeclareUnicodeCharacter{00B3}{$^3$} \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B5}{$\mu$} + \DeclareUnicodeCharacter{00B6}{\P} + \DeclareUnicodeCharacter{00B7}{\ifmmode\cdot\else $\cdot$\fi} \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00B9}{$^1$} \DeclareUnicodeCharacter{00BA}{\ordm} \DeclareUnicodeCharacter{00BB}{\guillemetright} + \DeclareUnicodeCharacter{00BC}{$1\over4$} + \DeclareUnicodeCharacter{00BD}{$1\over2$} + \DeclareUnicodeCharacter{00BE}{$3\over4$} \DeclareUnicodeCharacter{00BF}{\questiondown} \DeclareUnicodeCharacter{00C0}{\`A} @@ -9269,6 +9443,7 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{00D4}{\^O} \DeclareUnicodeCharacter{00D5}{\~O} \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D7}{\ifmmode\times\else $\times$\fi} \DeclareUnicodeCharacter{00D8}{\O} \DeclareUnicodeCharacter{00D9}{\`U} \DeclareUnicodeCharacter{00DA}{\'U} @@ -9302,6 +9477,7 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{00F4}{\^o} \DeclareUnicodeCharacter{00F5}{\~o} \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F7}{\ifmmode\div\else $\div$\fi} \DeclareUnicodeCharacter{00F8}{\o} \DeclareUnicodeCharacter{00F9}{\`u} \DeclareUnicodeCharacter{00FA}{\'u} @@ -9321,20 +9497,23 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0107}{\'c} \DeclareUnicodeCharacter{0108}{\^C} \DeclareUnicodeCharacter{0109}{\^c} - \DeclareUnicodeCharacter{0118}{\ogonek{E}} - \DeclareUnicodeCharacter{0119}{\ogonek{e}} \DeclareUnicodeCharacter{010A}{\dotaccent{C}} \DeclareUnicodeCharacter{010B}{\dotaccent{c}} \DeclareUnicodeCharacter{010C}{\v{C}} \DeclareUnicodeCharacter{010D}{\v{c}} \DeclareUnicodeCharacter{010E}{\v{D}} + \DeclareUnicodeCharacter{010F}{d'} + \DeclareUnicodeCharacter{0110}{\DH} + \DeclareUnicodeCharacter{0111}{\dh} \DeclareUnicodeCharacter{0112}{\=E} \DeclareUnicodeCharacter{0113}{\=e} \DeclareUnicodeCharacter{0114}{\u{E}} \DeclareUnicodeCharacter{0115}{\u{e}} \DeclareUnicodeCharacter{0116}{\dotaccent{E}} \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{0118}{\ogonek{E}} + \DeclareUnicodeCharacter{0119}{\ogonek{e}} \DeclareUnicodeCharacter{011A}{\v{E}} \DeclareUnicodeCharacter{011B}{\v{e}} \DeclareUnicodeCharacter{011C}{\^G} @@ -9344,14 +9523,20 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0120}{\dotaccent{G}} \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0122}{\cedilla{G}} + \DeclareUnicodeCharacter{0123}{\cedilla{g}} \DeclareUnicodeCharacter{0124}{\^H} \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0126}{\missingcharmsg{H WITH STROKE}} + \DeclareUnicodeCharacter{0127}{\missingcharmsg{h WITH STROKE}} \DeclareUnicodeCharacter{0128}{\~I} \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} \DeclareUnicodeCharacter{012A}{\=I} \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} \DeclareUnicodeCharacter{012C}{\u{I}} \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + \DeclareUnicodeCharacter{012E}{\ogonek{I}} + \DeclareUnicodeCharacter{012F}{\ogonek{i}} \DeclareUnicodeCharacter{0130}{\dotaccent{I}} \DeclareUnicodeCharacter{0131}{\dotless{i}} @@ -9359,15 +9544,29 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0133}{ij} \DeclareUnicodeCharacter{0134}{\^J} \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0136}{\cedilla{K}} + \DeclareUnicodeCharacter{0137}{\cedilla{k}} + \DeclareUnicodeCharacter{0138}{\ifmmode\kappa\else $\kappa$\fi} \DeclareUnicodeCharacter{0139}{\'L} \DeclareUnicodeCharacter{013A}{\'l} + \DeclareUnicodeCharacter{013B}{\cedilla{L}} + \DeclareUnicodeCharacter{013C}{\cedilla{l}} + \DeclareUnicodeCharacter{013D}{L'}% should kern + \DeclareUnicodeCharacter{013E}{l'}% should kern + \DeclareUnicodeCharacter{013F}{L\U{00B7}} + \DeclareUnicodeCharacter{0140}{l\U{00B7}} \DeclareUnicodeCharacter{0141}{\L} \DeclareUnicodeCharacter{0142}{\l} \DeclareUnicodeCharacter{0143}{\'N} \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0145}{\cedilla{N}} + \DeclareUnicodeCharacter{0146}{\cedilla{n}} \DeclareUnicodeCharacter{0147}{\v{N}} \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{0149}{'n} + \DeclareUnicodeCharacter{014A}{\missingcharmsg{ENG}} + \DeclareUnicodeCharacter{014B}{\missingcharmsg{eng}} \DeclareUnicodeCharacter{014C}{\=O} \DeclareUnicodeCharacter{014D}{\=o} \DeclareUnicodeCharacter{014E}{\u{O}} @@ -9379,6 +9578,8 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0153}{\oe} \DeclareUnicodeCharacter{0154}{\'R} \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0156}{\cedilla{R}} + \DeclareUnicodeCharacter{0157}{\cedilla{r}} \DeclareUnicodeCharacter{0158}{\v{R}} \DeclareUnicodeCharacter{0159}{\v{r}} \DeclareUnicodeCharacter{015A}{\'S} @@ -9390,10 +9591,12 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0160}{\v{S}} \DeclareUnicodeCharacter{0161}{\v{s}} - \DeclareUnicodeCharacter{0162}{\cedilla{t}} - \DeclareUnicodeCharacter{0163}{\cedilla{T}} + \DeclareUnicodeCharacter{0162}{\cedilla{T}} + \DeclareUnicodeCharacter{0163}{\cedilla{t}} \DeclareUnicodeCharacter{0164}{\v{T}} - + \DeclareUnicodeCharacter{0165}{\v{t}} + \DeclareUnicodeCharacter{0166}{\missingcharmsg{H WITH STROKE}} + \DeclareUnicodeCharacter{0167}{\missingcharmsg{h WITH STROKE}} \DeclareUnicodeCharacter{0168}{\~U} \DeclareUnicodeCharacter{0169}{\~u} \DeclareUnicodeCharacter{016A}{\=U} @@ -9405,6 +9608,8 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{0170}{\H{U}} \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0172}{\ogonek{U}} + \DeclareUnicodeCharacter{0173}{\ogonek{u}} \DeclareUnicodeCharacter{0174}{\^W} \DeclareUnicodeCharacter{0175}{\^w} \DeclareUnicodeCharacter{0176}{\^Y} @@ -9416,6 +9621,7 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{017C}{\dotaccent{z}} \DeclareUnicodeCharacter{017D}{\v{Z}} \DeclareUnicodeCharacter{017E}{\v{z}} + \DeclareUnicodeCharacter{017F}{\missingcharmsg{LONG S}} \DeclareUnicodeCharacter{01C4}{D\v{Z}} \DeclareUnicodeCharacter{01C5}{D\v{z}} @@ -9621,12 +9827,51 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{2261}{\equiv} }% end of \utfeightchardefs - % US-ASCII character definitions. \def\asciichardefs{% nothing need be done \relax } +% Latin1 (ISO-8859-1) character definitions. +\def\nonasciistringdefs{% + \setnonasciicharscatcode\active + \def\defstringchar##1{\def##1{\string##1}}% + \defstringchar^^a0\defstringchar^^a1\defstringchar^^a2\defstringchar^^a3% + \defstringchar^^a4\defstringchar^^a5\defstringchar^^a6\defstringchar^^a7% + \defstringchar^^a8\defstringchar^^a9\defstringchar^^aa\defstringchar^^ab% + \defstringchar^^ac\defstringchar^^ad\defstringchar^^ae\defstringchar^^af% + % + \defstringchar^^b0\defstringchar^^b1\defstringchar^^b2\defstringchar^^b3% + \defstringchar^^b4\defstringchar^^b5\defstringchar^^b6\defstringchar^^b7% + \defstringchar^^b8\defstringchar^^b9\defstringchar^^ba\defstringchar^^bb% + \defstringchar^^bc\defstringchar^^bd\defstringchar^^be\defstringchar^^bf% + % + \defstringchar^^c0\defstringchar^^c1\defstringchar^^c2\defstringchar^^c3% + \defstringchar^^c4\defstringchar^^c5\defstringchar^^c6\defstringchar^^c7% + \defstringchar^^c8\defstringchar^^c9\defstringchar^^ca\defstringchar^^cb% + \defstringchar^^cc\defstringchar^^cd\defstringchar^^ce\defstringchar^^cf% + % + \defstringchar^^d0\defstringchar^^d1\defstringchar^^d2\defstringchar^^d3% + \defstringchar^^d4\defstringchar^^d5\defstringchar^^d6\defstringchar^^d7% + \defstringchar^^d8\defstringchar^^d9\defstringchar^^da\defstringchar^^db% + \defstringchar^^dc\defstringchar^^dd\defstringchar^^de\defstringchar^^df% + % + \defstringchar^^e0\defstringchar^^e1\defstringchar^^e2\defstringchar^^e3% + \defstringchar^^e4\defstringchar^^e5\defstringchar^^e6\defstringchar^^e7% + \defstringchar^^e8\defstringchar^^e9\defstringchar^^ea\defstringchar^^eb% + \defstringchar^^ec\defstringchar^^ed\defstringchar^^ee\defstringchar^^ef% + % + \defstringchar^^f0\defstringchar^^f1\defstringchar^^f2\defstringchar^^f3% + \defstringchar^^f4\defstringchar^^f5\defstringchar^^f6\defstringchar^^f7% + \defstringchar^^f8\defstringchar^^f9\defstringchar^^fa\defstringchar^^fb% + \defstringchar^^fc\defstringchar^^fd\defstringchar^^fe\defstringchar^^ff% +} + + +% define all the unicode characters we know about, for the sake of @U. +\utfeightchardefs + + % Make non-ASCII characters printable again for compatibility with % existing Texinfo documents that may use them, even without declaring a % document encoding. @@ -9894,11 +10139,9 @@ directory should work if nowhere else does.} \catcode`\"=\active \def\activedoublequote{{\tt\char34}} \let"=\activedoublequote -\catcode`\~=\active -\def~{{\tt\char126}} +\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde \chardef\hat=`\^ -\catcode`\^=\active -\def^{{\tt \hat}} +\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} @@ -9908,16 +10151,26 @@ directory should work if nowhere else does.} \catcode`\|=\active \def|{{\tt\char124}} + \chardef \less=`\< -\catcode`\<=\active -\def<{{\tt \less}} +\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless \chardef \gtr=`\> -\catcode`\>=\active -\def>{{\tt \gtr}} -\catcode`\+=\active -\def+{{\tt \char 43}} -\catcode`\$=\active -\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix +\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr +\catcode`\+=\active \def+{{\tt \char 43}} +\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix + +% used for headline/footline in the output routine, in case the page +% breaks in the middle of an @tex block. +\def\texinfochars{% + \let< = \activeless + \let> = \activegtr + \let~ = \activetilde + \let^ = \activehat + \markupsetuplqdefault \markupsetuprqdefault + \let\b = \strong + \let\i = \smartitalic + % in principle, all other definitions in \tex have to be undone too. +} % If a .fmt file is being used, characters that might appear in a file % name cannot be active until we have parsed the command line. @@ -9967,22 +10220,27 @@ directory should work if nowhere else does.} @gdef@otherbackslash{@let\=@realbackslash} % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. -% -@def@normalturnoffactive{% - @let"=@normaldoublequote - @let$=@normaldollar %$ font-lock fix - @let+=@normalplus - @let<=@normalless - @let>=@normalgreater - @let\=@normalbackslash - @let^=@normalcaret - @let_=@normalunderscore - @let|=@normalverticalbar - @let~=@normaltilde - @markupsetuplqdefault - @markupsetuprqdefault - @unsepspaces +% the literal character `\'. Also revert - to its normal character, in +% case the active - from code has slipped in. +% +{@catcode`- = @active + @gdef@normalturnoffactive{% + @nonasciistringdefs + @let-=@normaldash + @let"=@normaldoublequote + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let\=@normalbackslash + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let~=@normaltilde + @markupsetuplqdefault + @markupsetuprqdefault + @unsepspaces + } } % Make _ and + \other characters, temporarily. @@ -10035,7 +10293,15 @@ directory should work if nowhere else does.} @markupsetuprqdefault @c Local variables: -@c page-delimiter: "^\\\\message" +@c eval: (add-hook 'write-file-hooks 'time-stamp) +@c page-delimiter: "^\\\\message\\|emacs-page" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d.%02H" +@c time-stamp-end: "}" @c End: @c vim:sw=2: + +@ignore + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 +@end ignore diff --git a/tex/txi-ca.tex b/tex/txi-ca.tex index 1f84662083..675475da36 100644 --- a/tex/txi-ca.tex +++ b/tex/txi-ca.tex @@ -22,13 +22,13 @@ \plainfrenchspacing \gdef\putwordAppendix{Annex} -\gdef\putwordChapter{Cap\'{\char16{}}tol} +\gdef\putwordChapter{Cap\'{\dotless{i}}tol} \gdef\putwordfile{fitxer} \gdef\putwordIndexIsEmpty{(L'\'Index \'es buit)} \gdef\putwordIndexNonexistent{(No existeix l'\'Index)} \gdef\putwordInfo{Info} \gdef\putwordMethodon{M\`etode de} -\gdef\putwordNoTitle{Sense T\'{\char{16}}tol} +\gdef\putwordNoTitle{Sense T\'{\dotless{i}}tol} \gdef\putwordof{de} \gdef\putwordon{de} \gdef\putwordpage{p\`agina} -- 2.39.2