@c -*- coding: utf-8; mode: texinfo; -*-
@node Documentation work
@chapter Documentation work

There are currently 11 manuals for LilyPond, not including the
translations.  Each book is available in HTML, PDF, and info.  The
documentation is written in a language called @code{texinfo} --
this allows us to generate different output formats from a single
set of source files.

To organize multiple authors working on the documentation, we use a
Version Control System (VCS) called git, previously discussed in
@ref{Starting with Git}.

@menu
* Introduction to documentation work::
* Documentation suggestions::
* Texinfo introduction and usage policy::
* Documentation policy::
* Tips for writing docs::
* Scripts to ease doc work::
* Docstrings in scheme::
* Translating the documentation::
@end menu


@node Introduction to documentation work
@section Introduction to documentation work

Our documentation tries to adhere to our @ref{Documentation
policy}.  This policy contains a few items which may seem odd.
One policy in particular is often questioned by potential
contributors: we do not repeat material in the Notation Reference,
and instead provide links to the @qq{definitive} presentation of
that information.  Some people point out, with good reason, that
this makes the documentation harder to read.  If we repeated
certain information in relevant places, readers would be less
likely to miss that information.

That reasoning is sound, but we have two counter-arguments.
First, the Notation Reference -- one of @emph{five} manuals for
users to read -- is already over 500 pages long.  If we repeated
material, we could easily exceed 1000 pages!  Second, and much
more importantly, LilyPond is an evolving project.  New features
are added, bugs are fixed, and bugs are discovered and documented.
If features are discussed in multiple places, the documentation
team must find every instance.  Since the manual is so large, it
is impossible for one person to have the location of every piece
of information memorized, so any attempt to update the
documentation will invariably omit a few places.  This second
concern is not at all theoretical; the documentation used to be
plagued with inconsistent information.

If the documentation were targeted for a specific version -- say,
LilyPond 2.10.5 -- and we had unlimited resources to spend on
documentation, then we could avoid this second problem.  But since
LilyPond evolves (and that is a very good thing!), and since we
have quite limited resources, this policy remains in place.

A few other policies (such as not permitting the use of tweaks in
the main portion of NR 1+2) may also seem counter-intuitive, but
they also stem from attempting to find the most effective use of
limited documentation help.

Before undertaking any large documentation work, contributors are
encouraged to contact the @ref{Meisters, Documentation Meister}.


@node Documentation suggestions
@section Documentation suggestions

@subheading Small additions

For additions to the documentation,

@enumerate

@item
Tell us where the addition should be placed.  Please include both
the section number and title (i.e. "LM 2.13 Printing lyrics").

@item
Please write exact changes to the text.

@item
A formal patch to the source code is @emph{not} required; we can
take care of the technical details.

@item
Send the suggestions to the @code{bug-lilypond} mailing list as
discussed in @rweb{Contact}.

@item
Here is an example of a perfect documentation report:

@verbatim
To: bug-lilypond@gnu.org
From: helpful-user@example.net
Subject: doc addition

In LM 2.13 (printing lyrics), above the last line ("More options,
like..."), please add:

----
To add lyrics to a divided part, use blah blah blah.  For example,

\score {
  \notes {blah <<blah>> }
  \lyrics {blah <<blah>> }
  blah blah blah
}
----

In addition, the second sentence of the first paragraph is
confusing.  Please delete that sentence (it begins "Users
often...") and replace it with this:
----
To align lyrics with something, do this thing.
----

Have a nice day,
Helpful User
@end verbatim

@end enumerate


@subheading Larger contributions

To replace large sections of the documentation, the guidelines are
stricter.  We cannot remove parts of the current documentation
unless we are certain that the new version is an improvement.

@enumerate

@item
Ask on the lilypond-devel mailing list if such a rewrite is necessary;
somebody else might already be working on this issue!

@item
Split your work into small sections; this makes it much easier to
compare the new and old documentation.

@item
Please prepare a formal git patch.

@end enumerate

Once you have followed these guidelines, please send a message to
lilypond-devel with your documentation submissions.  Unfortunately
there is a strict “no top-posting” check on the mailing list; to avoid
this, add:

> I'm not top posting.

(you must include the > ) to the top of your documentation
addition.

We may edit your suggestion for spelling, grammar, or style, and
we may not place the material exactly where you suggested, but if
you give us some material to work with, we can improve the manual
much faster.  Thanks for your interest!


@node Texinfo introduction and usage policy
@section Texinfo introduction and usage policy

@menu
* Texinfo introduction::
* Documentation files::
* Sectioning commands::
* LilyPond formatting::
* Text formatting::
* Syntax survey::
* Other text concerns::
@end menu


@node Texinfo introduction
@subsection Texinfo introduction

The language is called Texinfo; you can see its manual here:

@uref{http://www.gnu.org/software/texinfo/manual/texinfo/}

However, you don't need to read those docs.  The most important
thing to notice is that text is text.  If you see a mistake in the
text, you can fix it.  If you want to change the order of
something, you can cut-and-paste that stuff into a new location.

@warning{Rule of thumb: follow the examples in the existing docs.
You can learn most of what you need to know from this; if you want
to do anything fancy, discuss it on @code{lilypond-devel} first.}


@node Documentation files
@subsection Documentation files

All manuals live in @file{Documentation/}.

In particular, there are four user manuals, their respective master
source files are @file{learning.tely} (LM, Learning Manual),
@file{notation.tely} (NR, Notation Reference),
@file{music-glossary.tely} (MG, Music Glossary), and
@file{lilypond-program} (AU).  Each chapter is written in a separate
file, ending in @file{.itely} for files containing lilypond code, and
@file{.itexi} for files without lilypond code, located in a subdirectory
associated to the manual (@file{learning/} for @file{learning.tely}, and
so on); list the subdirectory of each manual to determine the filename
of the specific chapter you wish to modify.

Developer manuals live in @file{Documentation/} too.  Currently there is
only one: the Contributor's Guide @file{contrib-guide.texi} you are
reading.

Snippet files are part of documentation, and the Snippet List (SL) lives
in @file{Documentation/} just like the manuals.  For information about
how to modify the snippet files and SL, see @ref{LSR work}.


@node Sectioning commands
@subsection Sectioning commands

The Notation Reference uses section headings at four, occasionally
five, levels.

@itemize

@item Level 1: @@chapter
@item Level 2: @@section
@item Level 3: @@subsection
@item Level 4: @@unnumberedsubsubsec
@item Level 5: @@subsubsubheading
@end itemize

The first three levels are numbered in html, the last two are not.
Numbered sections correspond to a single html page in the split html
documents.

The first four levels always have accompanying nodes so they can be
referenced and are also included in the ToC in html.

Most of the manual is written at level 4 under headings created with

@example
@@node Foo
@@unnumberedsubsubsec Foo
@end example

Level 3 subsections are created with

@example
@@node Foo
@@subsection Foo
@end example

@itemize
@item
Please leave two blank lines above a @code{@@node}; this makes it
easier to find sections in texinfo.

@item
Do not use any @code{@@} commands for a @code{@@node}.  They may be
used for any @code{@@sub...} sections or headings however.

@example
not:
@@node @@code@{Foo@} Bar
@@subsection @@code@{Foo@} Bar

but instead:
@@node Foo Bar
@@subsection @@code@{Foo@} Bar
@end example

@item
With the exception of @code{@@} commands, the section name must
match the node name exactly.

@item
No commas may be used in the node names.

@item
If a heading is desired without creating a @code{@@node}, please use:

@example
@@subsubsubheading Foo
@end example

@item
Sectioning commands (@code{@@node} and @code{@@section}) must not appear
inside an @code{@@ignore}.  Separate those commands with a space, ie
@code{@@n}@tie{}@code{ode}.

@end itemize

Nodes must be included inside a

@example
@@menu
* foo::
* bar::
@@end menu
@end example

@noindent
construct.  These are easily constructed with automatic tools; see
@ref{Scripts to ease doc work}.


@node LilyPond formatting
@subsection LilyPond formatting

@itemize

@item
Most LilyPond examples throughout the documentation can be produced
with:

@example
@@lilypond[verbatim,quote,relative=1]
@end example

or

@example
@@lilypond[verbatim,quote,relative=2]
@end example

If using any combination of @code{\header@{@}}, @code{\score@{@}} or
@code{\layout@{@}} in your example, then you must omit the
@code{relative} variable and either use absolute entry mode or an
explicit @code{\relative@{@}} construction.

If using @code{\book@{@}} in your example then you must also omit the
@code{relative} variable and either use absolute entry mode or an
explicit @code{\relative@{@}} construction.  However, you must also
include the @code{papersize=X} variable, where @code{X} is a defined
paper size from within @file{scm/paper.scm}.  This is to avoid the
default @code{a4} paper size being used and leaving too much unnecessary
whitespace and potentially awkward page breaks in the PDFs.

The preferred @code{papersize}s are @code{a5}, @code{a6} or
@code{a8landscape}.

@code{a8landscape} works best for a single measure with a single title
and/or single @code{tagline}:

@example
@@lilypond[papersize=a8landscape,verbatim]
\book @{
  \header @{
    title = "A scale in LilyPond"
  @}
  \relative @{
    c d e f
  @}
@}
@@end lilypond
@end example

and can also be used to easily show features that require page breaks
(i.e. page numbers) without taking large amounts of space within the
documentation.  Do not use the @code{quote} option with this paper size.

@code{a5} or @code{a6} paper sizes are best used for examples that have
more than two measures of music or require multiple staves (i.e. to
illustrate cross-staff features, RH and LH parts etc.) and where
@code{\book@{@}} constructions are required or where @code{a8landscape}
produces an example that is too cramped.  Depending on the example the
@code{quote} option may need to be omitted.

In rare cases, other options may be used (or omitted), but ask first.

@item
Please avoid using extra spacing either after or within the
@code{@@lilypond} parameters.

@example
not:          @@lilypond [verbatim, quote, relative=1]
but instead:  @@lilypond[verbatim,quote,relative=1]
@end example

@item
Inspirational headwords are produced with:

@example
@@lilypondfile[quote,ragged-right,line-width=16\cm,staffsize=16]
@{pitches-headword.ly@}
@end example

@item
LSR snippets are linked with:

@example
@@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
@{filename.ly@}
@end example

@item
Use two spaces for indentation in lilypond examples (no tabs).

@item
All engravers should have double-quotes around them:

@example
\consists "Spans_arpeggio_engraver"
@end example

LilyPond does not strictly require this, but it is a useful
convention to follow.

@item
All context or layout object strings should be prefaced with @code{#}.
Again, LilyPond does not strictly require this, but it is helpful
to get users accustomed to this scheme construct, i.e. @code{\set
Staff.instrumentName = #"cello"}

@item
Try to avoid using @code{#'} or @code{#`} within when describing
context or layout properties outside of an @code{@@example} or @code{@@lilypond}, unless
the description explicitly requires it.

i.e. @qq{...setting the @code{transparent} property leaves the object where it
is, but makes it invisible.}

@item
If possible, only write one bar per line.

@item
If you only have one bar per line, omit bar checks.  If you
must put more than one bar per line (not recommended), then include bar
checks.

@item
Tweaks should, if possible, also occur on their own line.
@example
not:          \override TextScript #'padding = #3 c1^"hi"
but instead:  \override TextScript #'padding = #3
              c1^"hi"
@end example

@noindent
excepted in Templates, where `doctitle' may be omitted.

@item
Avoid long stretches of input code.  Nobody is going to read
them in print.  Create small examples.  However, this does not mean
it has be minimal.

@item
Specify durations for at least the first note of every bar.

@item
If possible, end with a complete bar.

@item
Comments should go on their own line, and be placed before
the line(s) to which they refer.

@item
For clarity, always use @{ @} marks even if they are not technically
required; i.e.

@example
not:

\context Voice \repeat unfold 2 \relative c' @{
  c2 d
@}

but instead:

\context Voice @{
  \repeat unfold 2 @{
    \relative c' @{
      c2 d
    @}
  @}
@}
@end example

@item
Add a space around @{ @} marks; i.e.

@example
not:          \chordmode@{c e g@}
but instead:  \chordmode @{ c e g @}
@end example

@item
Use @{ @} marks for additional @code{\markup} format commands; i.e.

@example
not:          c^\markup \tiny\sharp
but instead:  c^\markup @{ \tiny \sharp @}
@end example

@item
Remove any space around @code{<} @code{>} marks; i.e.

@example
not:           < c e g > 4
but instead:   <c e g>4
@end example

@item
Beam, slur and tie marks should begin immediately after the first
note with beam and phrase marks ending immediately after the last.

@example
a8\( ais16[ b cis( d] b) cis4~ b' cis,\)
@end example

@item
If you want to work on an example outside of the manual (for
easier/faster processing), use this header:

@example
\paper @{
  indent = 0\mm
  line-width = 160\mm - 2.0 * 0.4\in
  line-width = #(- line-width (* mm  3.000000))
@}

\layout @{
@}
@end example

You may not change any of these values.  If you are making an
example demonstrating special @code{\paper@{@}} values, contact the
Documentation Editor.

@end itemize


@node Text formatting
@subsection Text formatting

@itemize
@item
Lines should be less than 72 characters long.  (We personally
recommend writing with 66-char lines, but do not bother modifying
existing material).  Also see the recommendations for fixed-width
fonts in the @ref{Syntax survey}.

@item
Do not use tabs.

@item
Do not use spaces at the beginning of a line (except in
@code{@@example} or @code{@@verbatim} environments), and do not
use more than a single space between words.  @q{makeinfo} copies
the input lines verbatim without removing those spaces.

@item
Use two spaces after a period.

@item
In examples of syntax, use @code{@@var@{@var{musicexpr}@}} for a
music expression.

@item
Don't use @code{@@rinternals@{@}} in the main text.  If you're
tempted to do so, you're probably getting too close to @qq{talking
through the code}.  If you really want to refer to a context, use
@code{@@code@{@}} in the main text and @code{@@rinternals@{@}} in
the @code{@@seealso}.
@end itemize


@node Syntax survey
@subsection Syntax survey


@menu
* Comments::
* Cross references::
* External links::
* Fixed-width font::
* Indexing::
* Lists::
* Special characters::
* Miscellany::
@end menu


@node Comments
@unnumberedsubsubsec Comments

@itemize
@item
@code{@@c @dots{}} --- single line comment.  @samp{@@c NOTE:} is a
comment which should remain in the final version.  (gp only
command ;)

@item
@code{@@ignore} --- multi-line comment:

@example
@@ignore
@dots{}
@@end ignore
@end example
@end itemize


@node Cross references
@unnumberedsubsubsec Cross references

Enter the exact @code{@@node} name of the target reference between
the brackets (eg.@tie{}@w{@samp{@@ref@{Syntax survey@}}}).  Do not
split a cross-reference across two lines -- this causes the
cross-reference to be rendered incorrectly in html documents.

@itemize
@item
@code{@@ref@{@dots{}@}} --- link within current manual.

@item
@code{@@rchanges@{@dots{}@}} --- link to Changes.

@item
@code{@@rcontrib@{@dots{}@}} --- link to Contributor's Guide.

@item
@code{@@ressay@{@dots{}@}} --- link to Engraving Essay.

@item
@code{@@rextend@{@dots{}@}} --- link to Extending LilyPond.

@item
@code{@@rglos@{@dots{}@}} --- link to the Music Glossary.

@item
@code{@@rinternals@{@dots{}@}} --- link to the Internals Reference.

@item
@code{@@rlearning@{@dots{}@}} --- link to Learning Manual.

@item
@code{@@rlsr@{@dots{}@}} --- link to a Snippet section.

@item
@code{@@rprogram@{@dots{}@}} --- link to Application Usage.

@item
@code{@@ruser@{@dots{}@}} --- link to Notation Reference.

@item
@code{@@rweb@{@dots{}@}} --- link to General Information.
@end itemize


@node External links
@unnumberedsubsubsec External links

@itemize
@item
@code{@@email@{@dots{}@}} --- create a @code{mailto:} E-mail link.

@item
@code{@@uref@{@var{URL}[, @var{link text}]@}} --- link to an
external url.  Use within an @code{@@example ... @@end example}.

@example
@@example
@@uref@{URL [, link text ]@}
@@end example
@end example
@end itemize


@node Fixed-width font
@unnumberedsubsubsec Fixed-width font

@itemize
@item
@code{@@code@{@dots{}@}}, @code{@@samp@{@dots{}@}} ---

Use the @code{@@code@{@dots{}@}} command when referring to
individual language-specific tokens (keywords, commands,
engravers, scheme symbols, etc.) in the text.  Ideally, a single
@code{@@code@{@dots{}@}} block should fit within one line in the
PDF output.

Use the @code{@@samp@{@dots{}@}} command when you have a short
example of user input, unless it constitutes an entire
@code{@@item} by itself, in which case @code{@@code@{@dots{}@}} is
preferable.  Otherwise, both should only be used when part of a
larger sentence within a paragraph or @code{@@item}.  Do not use
@code{@@code@{@dots{}@}} or @code{@@samp@{@dots{}@}} inside an
@code{@@example} block, and do not use either as a free-standing
paragraph; use @code{@@example} instead.

A single unindented line in the PDF has space for about 79
fixed-width characters (76 if indented).  Within an @code{@@item}
there is space for about 75 fixed-width characters.  Each
additional level of @code{@@itemize} or @code{@@enumerate}
shortens the line by about 4 columns.

However, even short blocks of @code{@@code@{@dots{}@}} and
@code{@@samp@{@dots{}@}} can run into the margin if the Texinfo
line-breaking algorithm gets confused.  Additionally, blocks that
are longer than this may in fact print nicely; it all depends
where the line breaks end up.  If you compile the docs yourself,
check the PDF output to make sure the line breaks are
satisfactory.

The Texinfo setting @code{@@allowcodebreaks} is set to
@code{false} in the manuals, so lines within
@code{@@code@{@dots{}@}} or @code{@@samp@{@dots{}@}} blocks will
only break at spaces, not at hyphens or underscores.  If the block
contains spaces, use @code{@@w@{@@code@{@dots{}@}@}} or
@code{@@w@{@@samp@{@dots{}@}@}} to prevent unexpected line breaks.

The Texinfo settings @code{txicodequoteundirected} and
@code{txicodequotebacktick} are both set in the manuals, so
backticks (@code{`}) and apostrophes (@code{'}) placed within
blocks of @code{@@code}, @code{@@example}, or @code{@@verbatim}
are not converted to left- and right-angled quotes
(@code{@quoteleft{} @quoteright{}}) as they normally are within
the text, so the apostrophes in
@q{@w{@code{@@w@{@@code@{@bs{}relative c''@}@}}}} will display
correctly.  However, these settings do not affect the PDF output
for anything within a @code{@@samp} block (even if it includes a
nested @code{@@code} block), so entering
@q{@code{@@w@{@@samp@{@bs{}relative c''@}@}}} wrongly produces
@q{@w{@code{@bs{}relative c@quoteright{}@quoteright{}}}} in PDF.
Consequently, if you want to use a @code{@@samp@{@dots{}@}} block
which contains backticks or apostrophes, you should instead use
@q{@code{@@q@{@@code@{@dots{}@}@}}} (or
@q{@code{@@q@{@@w@{@@code@{@dots{}@}@}@}}} if the block also
contains spaces).  Note that backslashes within
@code{@@q@{@dots{}@}} blocks must be entered as @samp{@@bs@{@}},
so the example above would be coded as
@q{@code{@@q@{@@w@{@@code@{@@bs@{@}relative c''@}@}@}}}.

@item
@code{@@command@{@dots{}@}} --- Use when referring to command-line
commands within the text (eg. @samp{@@command@{convert-ly@}}).  Do
not use inside an @code{@@example} block.

@item
@code{@@example} --- Use for examples of program code.  Do not add
extraneous indentation (i.e. don't start every line with
whitespace).  Use the following layout (notice the use of blank
lines).  Omit the @code{@@noindent} if the text following the
example starts a new paragraph:

@example
@var{@dots{}text leading into the example@dots{}}

@@example
@dots{}
@@end example

@@noindent
@var{continuation of the text@dots{}}
@end example

Individual lines within an @code{@@example} block should not
exceed 74 characters; otherwise they will run into the margin in
the PDF output, and may get clipped.  If an @code{@@example} block
is part of an @code{@@item}, individual lines in the
@code{@@example} block should not exceed 70 columns.  Each
additional level of @code{@@itemize} or @code{@@enumerate}
shortens the line by about 4 columns.

For long command line examples, if possible, use a trailing
backslash to break up a single line, indenting the next line with
2 spaces.  If this isn't feasible, use @samp{@@smallexample
@dots{} @@end@tie{}smallexample} instead, which uses a smaller
fontsize.  Use @code{@@example} whenever possible, but if needed,
@code{@@smallexample} can fit up to 90 characters per line before
running into the PDF margin.  Each additional level of
@code{@@itemize} or @code{@@enumerate} shortens a
@code{@@smallexample} line by about 5 columns.

@item
@code{@@file@{@dots{}@}} --- Use when referring to filenames and
directories in the text.  Do not use inside an @code{@@example}
block.

@item
@code{@@option@{@dots{}@}} --- Use when referring to command-line
options in the text (eg. @samp{@@option@{--format@}}).  Do not use
inside an @code{@@example} block.

@item
@code{@@verbatim} --- Prints the block exactly as it appears in
the source file (including whitespace, etc.).  For program code
examples, use @code{@@example} instead.  @code{@@verbatim} uses
the same format as @code{@@example}.

Individual lines within an @code{@@verbatim} block should not
exceed 74 characters; otherwise they will run into the margin in
the PDF output, and may get clipped.  If an @code{@@verbatim}
block is part of an @code{@@item}, individual lines in the
@code{@@verbatim} block should not exceed 70 columns.  Each
additional level of @code{@@itemize} or @code{@@enumerate}
shortens the line by about 4 columns.
@end itemize


@node Indexing
@unnumberedsubsubsec Indexing

@itemize
@item
@code{@@cindex @dots{}} --- General index.  Please add as many as you can.
Don't capitalize the first word.

@item
@code{@@funindex @dots{}} --- is for a \lilycommand.
@end itemize


@node Lists
@unnumberedsubsubsec Lists

@itemize
@item
@code{@@enumerate} --- Create an ordered list (with numbers).
Always put @samp{@@item} on its own line.  As an exception, if all
the items in the list are short enough to fit on single lines, placing
them on the @samp{@@item} lines is also permissible.  @samp{@@item}
and @samp{@@end@tie{}enumerate} should always be preceded by a blank
line.

@example
@@enumerate

@@item
A long multi-line item like this one must begin
on a line of its own and all the other items in
the list must do so too.

@@item
Even short ones

@@end enumerate
@end example

@example
@@enumerate

@@item Short item

@@item Short item

@@end enumerate
@end example

@item
@code{@@itemize} --- Create an unordered list (with bullets).  Use
the same format as @code{@@enumerate}.  Do not use
@samp{@@itemize@tie{}@@bullet}.
@end itemize


@node Special characters
@unnumberedsubsubsec Special characters

@itemize
@item
@code{--}, @code{---} --- Create an en dash (--) or an em dash
(---) in the text.  To print two or three literal hyphens in a
row, wrap one of them in a @code{@@w@{@dots{}@}} (eg.
@samp{-@@w@{-@}-}).

@item
@code{@@@@}, @code{@@@{}, @code{@@@}} --- Create an at-sign (@@),
a left curly bracket (@{), or a right curly bracket (@}).

@item
@code{@@bs@{@}} --- Create a backslash within a
@code{@@q@{@dots{}@}}, @code{@@qq@{@dots{}@}}, or
@code{@@warning@{@dots{}@}} block.  This is a custom LilyPond
macro, not a builtin @@-command in Texinfo.  Texinfo would also
allow @samp{\\}, but this breaks the PDF output.

@item
@code{@@tie@{@}} --- Create a @emph{variable-width} non-breaking
space in the text (use @w{@samp{@@w@{ @}}} for a single
@emph{fixed-width} non-breaking space).  Variables or numbers
which consist of a single character (probably followed by a
punctuation mark) should be tied properly, either to the previous
or the next word.  Example: @samp{The letter@@tie@{@}@@q@{I@} is
skipped}
@end itemize


@node Miscellany
@unnumberedsubsubsec Miscellany

@itemize
@item
@code{@@notation@{@dots{}@}} --- refers to pieces of notation, e.g.
@samp{@@notation@{clef@}}.  Also use for specific lyrics
(@samp{the @@notation@{A@tie{}-@tie{}men@} is centered}).
Only use once per subsection per term.

@item
@code{@@q@{@dots{}@}} --- Single quotes.  Used for
@quoteleft{}vague@quoteright{} terms.  To get a backslash
(\), you must use @samp{@@bs@{@}}.

@item
@code{@@qq@{@dots{}@}} --- Double quotes.  Used for actual quotes
(@qq{he said}) or for introducing special input modes.  To get a
backslash (\), you must use @samp{@@bs@{@}}.

@item
@code{@@var@{@dots{}@}} --- Use for metasyntactic variables (such
as @code{@var{foo}}, @code{@var{bar}}, @code{@var{arg1}}, etc.).
In most cases, when the @code{@@var@{@dots{}@}} command appears in
the text (and not in an @code{@@example} block) it should be
wrapped with an appropriate texinfo code-highlighting command
(such as @code{@@code}, @code{@@samp}, @code{@@file},
@code{@@command}, etc.).  For example:
@samp{@@code@{@@var@{foo@}@}},
@samp{@@file@{@@var@{myfile.ly@}@}},
@w{@samp{@@samp@{git checkout @@var@{branch@}@}}}, etc.  This
improves readability in the PDF and HTML output.

@item
@code{@@version@{@}} --- Return the current LilyPond version
string.  Use @samp{@@w@{@@version@{@}@}} if it's at the end of a
line (to prevent an ugly line break in PDF); use
@samp{@@w@{"@@version@{@}"@}} if you need it in quotes.

@item
@code{@@w@{@dots{}@}} --- Do not allow any line breaks.

@item
@code{@@warning@{@dots{}@}} --- produces a @qq{Note:@tie{}} box.
Use for important messages.  To get a backslash (\), you must use
@samp{@@bs@{@}}.
@end itemize


@node Other text concerns
@subsection Other text concerns

@itemize
@item
References must occur at the end of a sentence, for more
information see the
@uref{http://www.gnu.org/software/texinfo/manual/texinfo/,texinfo
manual}.  Ideally this should also be the final sentence of a
paragraph, but this is not required.  Any link in a doc section
must be duplicated in the @code{@@seealso} section at the bottom.

@item
Introducing examples must be done with

@example
. (i.e. finish the previous sentence/paragraph)
: (i.e. `in this example:')
, (i.e. `may add foo with the blah construct,')
@end example

The old @qq{sentence runs directly into the example} method is not
allowed any more.

@item
Abbrevs in caps, e.g., HTML, DVI, MIDI, etc.

@item
Colon usage

@enumerate
@item
To introduce lists

@item
When beginning a quote: @qq{So, he said,...}.

This usage is rarer.  Americans often just use a comma.

@item
When adding a defining example at the end of a sentence.
@end enumerate

@item
Non-ASCII characters which are in utf-8 should be directly used;
this is, don't say @samp{Ba@@ss@{@}tuba} but @samp{Baßtuba}.  This
ensures that all such characters appear in all output formats.
@end itemize


@node Documentation policy
@section Documentation policy

@menu
* Books::
* Section organization::
* Checking cross-references::
* General writing::
* Technical writing style::
@end menu

@node Books
@subsection Books

There are four parts to the documentation: the Learning Manual,
the Notation Reference, the Program Reference, and the Music
Glossary.

@itemize

@item
Learning Manual:

The LM is written in a tutorial style which introduces the most
important concepts, structure and syntax of the elements of a
LilyPond score in a carefully graded sequence of steps.
Explanations of all musical concepts used in the Manual can be
found in the Music Glossary, and readers are assumed to have no
prior knowledge of LilyPond.  The objective is to take readers to
a level where the Notation Reference can be understood and
employed to both adapt the templates in the Appendix to their
needs and to begin to construct their own scores.  Commonly used
tweaks are introduced and explained.  Examples are provided
throughout which, while being focussed on the topic being
introduced, are long enough to seem real in order to retain the
readers' interest.  Each example builds on the previous material,
and comments are used liberally.  Every new aspect is thoroughly
explained before it is used.

Users are encouraged to read the complete Learning Manual from
start-to-finish.


@item
Notation Reference: a (hopefully complete) description of LilyPond
input notation.  Some material from here may be duplicated in the
Learning Manual (for teaching), but consider the NR to be the
"definitive" description of each notation element, with the LM
being an "extra".  The goal is _not_ to provide a step-by-step
learning environment -- do not avoid using notation that has not
be introduced previously in the NR  (for example, use \break if
appropriate).  This section is written in formal technical writing
style.

Avoid duplication.  Although users are not expected to read this
manual from start to finish, they should be familiar with the
material in the Learning Manual (particularly ``Fundamental
Concepts''), so do not repeat that material in each section of
this book.  Also watch out for common constructs, like ^ - _ for
directions -- those are explained in NR 3.  In NR 1, you can
write: DYNAMICS may be manually placed above or below the staff,
see @@ref@{Controlling direction and placement@}.

Most tweaks should be added to LSR and not placed directly in the
@file{.itely} file.  In some cases, tweaks may be placed in the main
text, but ask about this first.

Finally, you should assume that users know what the notation
means; explaining musical concepts happens in the Music Glossary.


@item
Application Usage: information about using the program lilypond
with other programs (lilypond-book, operating systems, GUIs,
convert-ly, etc).  This section is written in formal technical
writing style.

Users are not expected to read this manual from start to finish.


@item
Music Glossary: information about the music notation itself.
Explanations and translations about notation terms go here.

Users are not expected to read this manual from start to finish.

@item
Internals Reference: not really a documentation book, since it is
automagically generated from the source, but this is its name.

@end itemize


@node Section organization
@subsection Section organization

@itemize

@item
The order of headings inside documentation sections should
be:

@example
main docs
@@predefined
@@endpredefined
@@snippets
@@seealso
@@knownissues
@end example

@item
You @emph{must} include a @@seealso.

@itemize
@item
The order of items inside the @@seealso section is

@example
Music Glossary:
@@rglos@{foo@},
@@rglos@{bar@}.

Learning Manual:
@@rlearning@{baz@},
@@rlearning@{foozle@}.

Notation Reference:
@@ruser@{faazle@},
@@ruser@{boo@}.

Application Usage:
@@rprogram@{blah@}.

Essay on automated music engraving:
@@ressay@{yadda@}.

Extending LilyPond:
@@rextend@{frob@}.

Installed Files:
@@file@{path/to/dir/blahz@}.

Snippets: @@rlsr@{section@}.

Internals Reference:
@@rinternals@{fazzle@},
@@rinternals@{booar@}.
@end example

@item
If there are multiple entries, separate them by commas but do not
include an `and'.

@item
Always end with a period.

@item
Place each link on a new line as above; this makes it much easier
to add or remove links.  In the output, they appear on a single
line.

("Snippets" is REQUIRED; the others are optional)

@item
Any new concepts or links which require an explanation should go
as a full sentence(s) in the main text.

@item
Don't insert an empty line between @@seealso and the first entry!
Otherwise there is excessive vertical space in the PDF output.

@end itemize

@item
To create links, use @@ref@{@} if the link is within the same
manual.

@item
@@predefined ... @@endpredefined is for commands in
@file{ly/*-init.ly}

@item
Do not include any real info in second-level sections (i.e. 1.1
Pitches).  A first-level section may have introductory material,
but other than that all material goes into third-level sections
(i.e. 1.1.1 Writing Pitches).

@item
The @@knownissues should not discuss any issues that are in the
tracker, unless the issue is Priority-Postponed.  The goal is to
discuss any overall architecture or syntax decisions which may be
interpreted as bugs.  Normal bugs should not be discussed here,
because we have so many bugs that it would be a huge task to keep
the @@knownissues current and accurate all the time.

@end itemize


@node Checking cross-references
@subsection Checking cross-references

Cross-references between different manuals are heavily used in the
documentation, but they are not checked during compilation.
However, if you compile the documentation, a script called
check_texi_refs can help you with checking and fixing these
cross-references; for information on usage, cd into a source tree
where documentation has been built, cd into Documentation and run:

@example
make check-xrefs
make fix-xrefs
@end example

Note that you have to find yourself the source files to fix
cross-references in the generated documentation such as the
Internals Reference; e.g. you can grep scm/ and lily/.

@c temporary?  how long will kainhofer be used?  -gp
Also of interest may be the linkdoc checks on kainhofer.com.  Be
warned that these docs are not completely rebuilt every day, so it
might not accurately reflect the current state of the docs.

@example
@uref{http://kainhofer.com/~lilypond/linkdoc/}
@end example


@node General writing
@subsection General writing

@itemize

@item
Do not forget to create @@cindex entries for new sections of text.
Enter commands with @@funindex, i.e.

@example
@@cindex pitches, writing in different octaves
@@funindex \relative
@end example

@noindent
Do not bother with the @@code@{@} (they are added automatically).
These items are added to both the command index and the unified
index.  Both index commands should go in front of the actual material.

@item
@@cindex entries should not be capitalized, i.e.

@example
@@cindex time signature
@end example

@noindent
is preferred instead of @qq{Time signature}.  Only use capital
letters for musical terms which demand them, e.g.
@qq{D.S. al Fine}.

@item
For scheme function index entries, only include the final part, i.e.

@example
@@funindex modern-voice-cautionary
     and NOT
@@funindex #(set-accidental-style modern-voice-cautionary)
@end example

@item
Use American spelling.  LilyPond's internal property
names use this convention.

@item
Here is a list of preferred terms to be used:

@itemize
@item
@emph{Simultaneous} NOT concurrent.

@item
@emph{Measure}: the unit of music.

@item
@emph{Bar line}: the symbol delimiting a measure NOT barline.

@item
@emph{Note head} NOT notehead.

@item
@emph{Chord construct} NOT just chord (when referring to < ... >)

@item
@emph{Staff} NOT stave.

@item
@emph{Staves} NOT Staffs:
Phrases such as
@q{multiple @@internalsref@{Staff@}s}
should be rephrased to
@q{multiple @@internalsref@{Staff@} contexts}.

@end itemize


@end itemize


@node Technical writing style
@subsection Technical writing style

These refer to the NR.  The LM uses a more gentle, colloquial
style.

@itemize

@item
Do not refer to LilyPond in the text.  The reader knows what the
manual is about.  If you do, capitalization is LilyPond.

@item
If you explicitly refer to @q{lilypond} the program (or any other
command to be executed), write @code{@@command@{lilypond@}}.

@item
Do not explicitly refer to the reader/user.  There is no one else
besides the reader and the writer.

@item
Avoid contractions (don't, won't, etc.).  Spell the words out completely.

@item
Avoid abbreviations, except for commonly used abbreviations of foreign
language terms such as etc. and i.e.

@item
Avoid fluff (@qq{Notice that,} @qq{as you can see,}
@qq{Currently,}).

@item
The use of the word @q{illegal} is inappropriate in most cases.
Say @q{invalid} instead.

@end itemize


@node Tips for writing docs
@section Tips for writing docs

In the NR, I highly recommend focusing on one subsection at a
time.  For each subsection,

@itemize

@item
check the mundane formatting.  Are the headings (@@predefined,
@@seealso, etc.) in the right order?

@item
add any appropriate index entries.

@item
check the links in the @@seealso section -- links to music
glossary, internal references, and other NR sections are the main
concern.  Check for potential additions.

@item
move LSR-worthy material into LSR.  Add the snippet, delete the
material from the @file{.itely} file, and add a @@lilypondfile command.

@item
check the examples and descriptions.  Do they still work?
@strong{Do not} assume that the existing text is
accurate/complete; some of the manual is highly out of date.

@item
is the material in the @@knownissues  still accurate?

@item
can the examples be improved (made more explanatory), or is there
any missing info?  (feel free to ask specific questions on -user;
a couple of people claimed to be interesting in being
@qq{consultants} who would help with such questions)

@end itemize

In general, I favor short text explanations with good examples --
@qq{an example is worth a thousand words}.  When I worked on the
docs, I spent about half my time just working on those tiny
lilypond examples.  Making easily-understandable examples is much
harder than it looks.


@subsubheading Tweaks

In general, any \set or \override commands should go in the
@qq{select snippets} section, which means that they should go in
LSR and not the @file{.itely} file.  For some cases, the command
obviously belongs in the @qq{main text} (i.e. not inside
@@predefined or @@seealso or whatever) -- instrument names are a
good example of this.

@example
\set Staff.instrumentName = #"foo"
@end example

On the other side of this,

@example
\override Score.Hairpin #'after-line-breaking = ##t
@end example

clearly belongs in LSR.

I'm quite willing to discuss specific cases if you think that a
tweaks needs to be in the main text.  But items that can go into
LSR are easier to maintain, so I'd like to move as much as
possible into there.


It would be @qq{nice} if you spent a lot of time crafting nice
tweaks for users@dots{} but my recommendation is @strong{not} to do
this.  There's a lot of doc work to do without adding examples of
tweaks.  Tweak examples can easily be added by normal users by adding
them to the LSR.

One place where a documentation writer can profitably spend time writing
or upgrading tweaks is creating tweaks to deal with known issues.  It
would be ideal if every significant known issue had a workaround to avoid
the difficulty.

@seealso
@ref{Adding and editing snippets}.


@node Scripts to ease doc work
@section Scripts to ease doc work

@subheading Building only one section of the documentation

In order to save build time, a script is available to build only
one section of the documentation in English with a default html
appearance.

You can build a section of the documentation with:

@example
scripts/auxiliar/doc-section.sh MANUAL SECTION
@end example

@noindent
where @code{SECTION} is the name of the file containing the section
to be built, and @code{MANUAL} is replaced by the name of the directory
containing the section.  So, for example, to build section 1.1 of the
Notation Reference, use the command:

@example
scripts/auxiliar/doc-section.sh notation pitches
@end example

You can then see the generated document for the section at

@example
tempdocs/pitches/out/pitches.html
@end example

According to
@uref{http://code.google.com/p/lilypond/issues/detail?id=1236,Lilypond issue 1236},
the location of the lilypond git tree is taken from @code{$LILYPOND_GIT}
if specified, otherwise it is auto-detected.

It is assumed that compilation takes place in the @file{build/}
subdirectory, but this can be overridden by setting the environment
variable @code{LILYPOND_BUILD_DIR}.

Similarly, output defaults to @file{build/tempdocs/} but this can be
overridden by setting the environment variable
@code{LILYPOND_TEMPDOCS}.

This script will not work for building sections of the
Contributors' guide.  For building sections of the Contributors'
Guide, use:

@example
scripts/auxiliar/cg-section.sh SECTION
@end example

@noindent
where @code{SECTION} is the name of the file containing the sections
to be built.  For example, to build section 4 of the Contributors' guide,
use:

@example
scripts/auxiliar/cg-section.sh doc-work
@end example

@code{cg-section.sh} uses the same environment variables and
corresponding default values as @code{doc-section.sh}.

@subheading Stripping whitespace and generating menus

@warning{This script assumes that the file conforms to our doc
policy; a few files still need work in this regard.}

To automatically regenerate @code{@@menu} portions and strip
whitespace, use:

@example
scripts/auxiliar/node-menuify.py @var{FILENAME}
@end example


@subheading Stripping whitespace only

@c TODO: should this be documented elsewhere?  It's useful for
@c more than just docs.
To remove extra whitespace from the ends of lines, run

@example
scripts/auxiliar/strip-whitespace.py Documentation/FILENAME
@end example


@subheading Updating doc with @command{convert-ly}

Don't.  This should be done by programmers when they add new
features.  If you notice that it hasn't been done, complain to
@code{lilypond-devel}.


@node Docstrings in scheme
@section Docstrings in scheme

Material in the Internals reference is generated automatically
from our source code.  Any doc work on Internals therefore
requires modifying files in @file{scm/*.scm}.  Texinfo is allowed
in these docstrings.

Most documentation writers never touch these, though.  If you want
to work on them, please ask for help.


@node Translating the documentation
@section Translating the documentation

The mailing list @code{translations@@lilynet.net} is dedicated to
LilyPond web site and documentation translation; on this list, you will
get support from the Translations Meister and experienced translators,
and we regularly discuss translation issues common to all languages.
All people interested in LilyPond translations are invited to subscribe
to this list regardless of the amount of their contribution, by sending
an email to @code{translations-request@@lilynet.net} with subject
@code{subscribe} and an empty message body.  Unless mentioned explicitly,
or except if a translations coordinator contacts you privately, you
should send questions, remarks and patches to the list
@code{translations@@lilynet.net}.  Please note that traffic is high
on the English-speaking list @code{lilypond-user@@gnu.org}, so it may
take some time before your request or contribution is handled.

@menu
* Getting started with documentation translation::
* Documentation translation details::
* Documentation translation maintenance::
* Translations management policies::
* Technical background::
@end menu

@node Getting started with documentation translation
@subsection Getting started with documentation translation

First, get the sources of branch @code{translation} from the
Git repository, see @ref{Starting with Git}.

@menu
* Translation requirements::
* Which documentation can be translated::
* Starting translation in a new language::
@end menu

@node Translation requirements
@unnumberedsubsubsec Translation requirements

Working on LilyPond documentation translations requires the following
pieces of software, in order to make use of dedicated helper tools:

@itemize
@item Python 2.4 or higher,
@item GNU Make,
@item Gettext,
@item Git.
@end itemize

It is not required to build LilyPond and the documentation to
translate the documentation.  However, if you have enough time and
motivation and a suitable system, it can be very useful to build at
least the documentation so that you can check the output yourself and
more quickly; if you are interested, see @ref{Compiling}.

Before undertaking any large translation work, contributors are
encouraged to contact the @ref{Meisters, Translation Meister}.


@node Which documentation can be translated
@unnumberedsubsubsec Which documentation can be translated

The makefiles and scripts infrastructure currently supports translation
of the following documentation:

@itemize
@item the web site, the Learning Manual, the Notation Reference and
Application Usage -- Texinfo source, PDF and HTML output; Info output
might be added if there is enough demand for it;
@item the Changes document.
@end itemize

Support for translating the following pieces of documentation should be
added soon, by decreasing order of priority:

@itemize
@item automatically generated documentation: markup commands,
predefined music functions;
@item the Snippets List;
@item the Internals Reference.
@end itemize


@node Starting translation in a new language
@unnumberedsubsubsec Starting translation in a new language

At top of the source directory, do

@example
./autogen.sh
@end example

@noindent
or (if you want to install your self-compiled LilyPond locally)

@example
./autogen.sh --prefix=$HOME
@end example

@noindent
If you want to compile LilyPond -- which is almost required to build
the documentation, but is not required to do translation only -- fix
all dependencies and rerun @command{./configure} (with the same
options as for @command{autogen.sh}).

Then @command{cd} into @file{Documentation/} and run

@example
make ISOLANG=@var{MY-LANGUAGE} new-lang
@end example

@noindent
where @var{MY-LANGUAGE} is the ISO 639 language code.

Finally, add a language definition for your language in
@file{python/langdefs.py}.


@node Documentation translation details
@subsection Documentation translation details

Please follow all the instructions with care to ensure quality work.

All files should be encoded in UTF-8.

@menu
* Files to be translated::
* Translating the Web site and other Texinfo documentation::
* Adding a Texinfo manual::
@end menu

@node Files to be translated
@unnumberedsubsubsec Files to be translated

@include contributor/doc-translation-list.itexi

In addition, not listed above, Snippets' titles and descriptions
should be translated; they are a part of the Notation Reference and
therefore their priority is 5.

@node Translating the Web site and other Texinfo documentation
@unnumberedsubsubsec Translating the Web site and other Texinfo documentation

Every piece of text should be translated in the source file, except
Texinfo comments, text in @code{@@lilypond} blocks and a few cases
mentioned below.

Node names are translated, but the original node name in English should
be kept as the argument of @code{@@translationof} put after the section
title; that is, every piece in the original file like

@example
@@node Foo bar
@@@var{section_command} Bar baz
@end example

@noindent
should be translated as

@example
@@node @var{translation of Foo bar}
@@@var{section_command} @var{translation of Bar baz}
@@translationof Foo bar
@end example

The argument of @code{@@rglos} commands and the first argument of
@code{@@rglosnamed} commands must not be translated, as it is the node
name of an entry in Music Glossary.

Every time you translate a node name in a cross-reference, i.e. the
argument of commands @code{@@ref, @@rprogram, @@rlearning, @@rlsr,
@@ruser} or the first argument of their @code{@var{*}named} variants,
you should make sure the target node is defined in the correct source
file; if you do not intend to translate the target node right now, you
should at least write the node definition (that is, the @code{@@node
@@@var{section_commmand} @@translationof} trio mentioned above) in the
expected source file and define all its parent nodes; for each node you
have defined this way but have not translated, insert a line that
contains @code{@@untranslated}.  That is, you should end up
for each untranslated node with something like

@example
@@node @var{translation of Foo bar}
@@@var{section_command} @var{translation of Bar baz}
@@translationof Foo bar

@@untranslated
@end example

@warning{you do not have to translate the node name of a cross-reference
to a node that you do not have translated.  If you do, you must define
an @qq{empty} node like explained just above; this will produce a
cross-reference with the translated node name in output, although the
target node will still be in English.  On the opposite, if all
cross-references that refer to an untranslated node use the node name in
English, then you do not have to define such an @qq{empty} node, and the
cross-reference text will appear in English in the output.  The choice
between these two strategies implies its particular maintenance
requirements and is left to the translators, although the opinion of the
Translation meister leans towards not translating these
cross-references.}

Please think of the fact that it may not make sense translating
everything in some Texinfo files, and you may take distance from the
original text; for instance, in the translation of the web site section
Community, you may take this into account depending on what you know the
community in your language is willing to support, which is possible only
if you personally assume this support, or there exists a public forum
or mailing list listed in Community for LilyPond in your language:

@itemize
@item @rweb{Bug reports}: this page should be translated only if you
know that every bug report sent on your language's mailing list or forum
will be handled by someone who will translate it to English and send it
on bug-lilypond or add an issue in the tracker, then translate back the
reply from developers.

@item @rweb{Help us}: this page should be translated very freely,
and possibly not at all: ask help for contributing to LilyPond for tasks
that LilyPond community in your language is able and going to handle.
@end itemize

@noindent
In any case, please mark in your work the sections which do not result
from the direct translation of a piece of English translation, using
comments i.e. lines starting with @q{@code{@@c}}.

Finally, press in Emacs @key{C-c C-u C-a} to update or generate
menus.  This process should be made easier in the future, when the helper
script @command{texi-langutils.py} and the makefile target are updated.

Some pieces of text manipulated by build scripts that appear in the
output are translated in a @file{.po} file -- just like LilyPond output
messages -- in @file{Documentation/po}.  The Gettext domain is named
@code{lilypond-doc}, and unlike @code{lilypond} domain it is not managed
through the Free Translation Project.


Take care of using typographic rules for your language, especially in
@file{macros.itexi}.

If you wonder whether a word, phrase or larger piece of text should be
translated, whether it is an argument of a Texinfo command or a small
piece sandwiched between two Texinfo commands, try to track whether and
where it appears in PDF and/or HTML output as visible text.  This piece
of advice is especially useful for translating @file{macros.itexi}.

Please keep verbatim copies of music snippets (in @code{@@lilypond}
blocs).  However, some music snippets containing text that shows in
the rendered music, and sometimes translating this text really helps
the user to understand the documentation; in this case, and only in
this case, you may as an exception translate text in the music
snippet, and then you must add a line immediately before the
@code{@@lilypond} block, starting with

@example
@@c KEEP LY
@end example

@noindent
Otherwise the music snippet would be reset to the same content as the
English version at next @command{make snippet-update} run -- see
@ref{Updating documentation translation}.

When you encounter

@example
@@lilypondfile[<number of fragment options>,texidoc]@{@var{filename.ly}@}
@end example

@noindent
in the source, open @file{Documentation/snippets/@var{filename}.ly},
translate the @code{texidoc} header field it contains, enclose it with
@code{texidoc@var{MY-LANGUAGE} = "} and @code{"}, and write it into
@file{Documentation/@var{MY-LANGUAGE}/texidocs/@/@var{filename}.texidoc}.
Additionally, you may translate the snippet's title in @code{doctitle}
header field, in case @code{doctitle} is a fragment option used in
@code{@@lilypondfile}; you can do this exactly the same way as
@code{texidoc}.  For instance,
@file{Documentation/@var{MY-LANGUAGE}/texidocs/@/@var{filename}.texidoc}
may contain

@example
doctitlees = "Spanish title baz"
texidoces = "
Spanish translation blah
"
@end example

@code{@@example} blocks need not be verbatim copies, e.g. variable
names, file names and comments should be translated.

Finally, please carefully apply every rule exposed in @ref{Texinfo
introduction and usage policy}, and @ref{Documentation policy}.  If one
of these rules conflicts with a rule specific to your language, please
ask the Translation meister on @email{translations@@lilynet.net} list
and/or the Documentation Editors on @email{lilypond-devel@@gnu.org}
list.


@node Adding a Texinfo manual
@unnumberedsubsubsec Adding a Texinfo manual

In order to start translating a new manual whose basename is @var{FOO},
do

@example
cd Documentation/@var{MY-LANGUAGE}
cp ../@var{FOO}.tely .
mkdir @var{FOO}
cp web/GNUmakefile @var{FOO}
@end example

@noindent
then append @var{FOO} to variable @code{SUBDIRS} in
Documentation/@var{MY-LANGUAGE}/GNUmakefile, then translate file
@var{MY-LANGUAGE}/@var{FOO}.tely and run @code{skeleton-update}:

@example
cd Documentation/
make ISOLANG=@var{MY-LANGUAGE} TEXI_LANGUTIL_FLAGS=--head-only skeleton-update
@end example

@noindent
Your are now ready to translate the new manual exactly like the web site
or the Learning Manual.


@node Documentation translation maintenance
@subsection Documentation translation maintenance

Several tools have been developed to make translations maintenance
easier.  These helper scripts make use of the power of Git, the
version control system used for LilyPond development.

You should use them whenever you would like to update the translation in
your language, which you may do at the frequency that fits your and your
cotranslators' respective available times.  In the case your translation
is up-do-date (which you can discover in the first subsection below), it
is enough to check its state every one or two weeks.  If you feel
overwhelmed by the quantity of documentation to be updated, see
@ref{Maintaining without updating translations}.

@menu
* Check state of translation::
* Updating documentation translation::
* Updating translation committishes::
@end menu

@macro seeCommittishesUpdate{}
@warning{do not forget to update the committish in each file you have
completely updated, see @ref{Updating translation committishes}.}
@end macro

@node Check state of translation
@unnumberedsubsubsec Check state of translation

First pull from Git -- see @ref{Pulling and rebasing}, but DO NOT rebase
unless you are sure to master the translation state checking and
updating system -- then cd into @file{Documentation/} (or at top of the
source tree, replace @command{make} with @command{make -C
Documentation}) and run

@example
make ISOLANG=@var{MY_LANGUAGE} check-translation
@end example

@noindent
This presents a diff of the original files since the most recent
revision of the translation.  To check a single file, cd into
@file{Documentation/} and run

@example
make CHECKED_FILES=@var{MY_LANGUAGE}/@var{manual}/@var{foo}.itely check-translation
@end example

@noindent
In case this file has been renamed since you last updated the
translation, you should specify both old and new file names, e.g.
@code{CHECKED_FILES=@var{MY_LANGUAGE}/@{@var{manual},user@}/@var{foo}.itely}.

To see only which files need to be updated, do

@example
make ISOLANG=@var{MY_LANGUAGE} check-translation | grep 'diff --git'
@end example

To avoid printing terminal colors control characters, which is often
desirable when you redirect output to a file, run

@example
make ISOLANG=@var{MY_LANGUAGE} NO_COLOR=1 check-translation
@end example

You can see the diffs generated by the commands above as changes that
you should make in your language to the existing translation, in order
to make your translation up to date.

@seeCommittishesUpdate

Global state of the translation is recorded in
@file{Documentation/translations.itexi}, which is used to generate
Translations status page.  To update that page, do from
@file{Documentation/}

@example
make translation-status
@end example

This will also leave @file{out/translations-status.txt}, which contains
up-to-dateness percentages for each translated file, and update word
counts of documentation files in this Guide.

@seealso
@ref{Maintaining without updating translations}.

@node Updating documentation translation
@unnumberedsubsubsec Updating documentation translation

Instead of running @code{check-translation}, you may want to run
@code{update-translation}, which will run your favorite text editor to
update files.  First, make sure environment variable @code{EDITOR} is
set to a text editor command, then run from @file{Documentation/}

@example
make ISOLANG=@var{MY_LANGUAGE} update-translation
@end example

@noindent
or to update a single file

@example
make CHECKED_FILES=@var{MY_LANGUAGE/@var{manual}/foo.itely} update-translation
@end example

For each file to be updated, @code{update-translation} will open your
text editor with this file and a diff of the file in English; if the
diff cannot be generated or is bigger than the file in English itself,
the full file in English will be opened instead.

@seeCommittishesUpdate

Texinfo skeleton files, i.e. @file{.itely} files not yet translated,
containing only the first node of the original file in English can be
updated automatically: whenever @command{make check-translation} shows
that such files should be updated, run from @file{Documentation/}

@example
make ISOLANG=@var{MY_LANGUAGE} skeleton-update
@end example

@file{.po} message catalogs in @file{Documentation/po/} may be updated
by issuing from @file{Documentation/} or @file{Documentation/po/}

@example
make po-update
@end example

@warning{if you run po-update and somebody else does the same and
pushes before you push or send a patch to be applied, there will be a
conflict when you pull.  Therefore, it is better that only the
Translation meister runs this command.}

Updating music snippets can quickly become cumbersome, as most
snippets should be identical in all languages.  Fortunately, there is
a script that can do this odd job for you (run from
@file{Documentation/}):

@example
make ISOLANG=@var{MY_LANGUAGE} snippet-update
@end example

This script overwrites music snippets in
@file{@var{MY_LANGUAGE/foo/every.itely}} with music snippets from
@file{@var{foo/every.itely}}.  It ignores skeleton files, and keeps
intact music snippets preceded with a line starting with @code{@@c
KEEP LY}; it reports an error for each @file{.itely} that has not the
same music snippet count in both languages.  Always use this script
with a lot of care, i.e. run it on a clean Git working tree, and check
the changes it made with @command{git diff} before committing; if you
don't do so, some @code{@@lilypond} snippets might be broken or make
no sense in their context.

Finally, a command runs the three update processes above for all
enabled languages (from @file{Documentation/}):

@example
make all-translations-update
@end example

Use this command with caution, and keep in mind it will not be really
useful until translations are stabilized after the end of GDP and GOP.

@seealso
@ref{Maintaining without updating translations},
@ref{Adding and editing snippets}.


@node Updating translation committishes
@unnumberedsubsubsec Updating translation committishes

At the beginning of each translated file except PO files, there is a
committish which represents the revision of the sources which you have
used to translate this file from the file in English.

When you have pulled and updated a translation, it is very important to
update this committish in the files you have completely updated (and
only these); to do this, first commit possible changes to any
documentation in English which you are sure to have done in your
translation as well, then replace in the up-to-date translated files the
old committish by the committish of latest commit, which can be obtained
by doing

@example
git rev-list HEAD |head -1
@end example

@c http://lists.gnu.org/archive/html/lilypond-devel/2009-01/msg00245.html
@c contains a helper script which could be used to perform massive
@c committish updates.


@seealso
@ref{LSR work}.

@node Translations management policies
@subsection Translations management policies

These policies show the general intent of how the translations should
be managed, they aim at helping translators, developers and
coordinators work efficiently.

@menu
* Maintaining without updating translations::
* Managing documentation translation with Git::
@end menu

@node Maintaining without updating translations
@unnumberedsubsubsec Maintaining without updating translations

Keeping translations up to date under heavy changes in the documentation
in English may be almost impossible, especially as during the former
Grand Documentation Project (GDP) or the Grand Organization Project
(GOP) when a lot of contributors brings changes.  In addition,
translators may be --- and that is a very good thing --- involved in
these projects too.

it is possible --- and even recommended --- to perform some maintenance
that keeps translated documentation usable and eases future translation
updating.  The rationale below the tasks list motivates this plan.

The following tasks are listed in decreasing priority order.

@enumerate
@item Update macros.itexi.
For each obsolete macro definition, if it is possible to update macro
usage in documentation with an automatic text or regexp substitution,
do it and delete the macro definition from @file{macros.itexi}; otherwise,
mark this macro definition as obsolete with a comment, and keep it in
@file{macros.itexi} until the documentation translation has been updated and
no longer uses this macro.

@item Update @file{*.tely} files completely with
@command{make check-translation} -- you may want to redirect output
to a file because of overwhelming output, or call check-translation.py
on individual files, see @ref{Check state of translation}.

@item In @file{.itelys}, match sections and .itely file names with those from
English docs, which possibly involves moving nodes contents in block
between files, without updating contents itself.  In other words, the
game is catching where has gone each section.  In Learning manual, and
in Notation Reference sections which have been revised in GDP, there may
be completely new sections: in this case, copy @code{@@node} and
@code{@@section}-command from English docs, and add the marker for
untranslated status @code{@@untranslated} on a single line.  Note that
it is not possible to exactly match subsections or subsubsections of
documentation in English, when contents has been deeply revised; in this
case, keep obsolete (sub)subsections in the translation, marking them
with a line @code{@@c obsolete} just before the node.

Emacs with Texinfo mode makes this step easier:

@itemize
@item without Emacs AucTeX installed, @key{C-c C-s} shows structure of current
Texinfo file in a new buffer @code{*Occur*}; to show structure of two files
simultaneously, first split Emacs window in 4 tiles (with @key{C-x 1}
and @key{C-x 2}), press @key{C-c C-s} to show structure of one file
(e.g. the translated file), copy @code{*Occur*} contents into
@code{*Scratch*}, then press @key{C-c C-s} for the other file.

If you happen to have installed AucTeX, you can either call the macro
by doing @key{M-x texinfo-show-structure} or create a key binding in your
@file{~/.emacs}, by adding the four following lines:

@example
(add-hook 'Texinfo-mode-hook
          '(lambda ()
             (define-key Texinfo-mode-map "\C-cs"
              'texinfo-show-structure)))
@end example

@noindent
and then obtain the structure in the @code{*Occur*} buffer with @key{C-c
s}.

@item Do not bother updating @code{@@menu}s when all menu entries are in the same
file, just do @key{C-c C-u C-a} (@qq{update all menus}) when you have
updated all the rest of the file.

@item Moving to next or previous node using incremental search: press
@key{C-s} and type @code{node} (or @key{C-s @@node} if the text
contains the word @q{node}) then press @key{C-s} to move to next node
or @key{C-r} to move to previous node.  Similar operation can be used
to move to the next/previous section.  Note that every cursor move
exits incremental search, and hitting @key{C-s} twice starts
incremental search with the text entered in previous incremental
search.

@item Moving a whole node (or even a sequence of nodes): jump to beginning
of the node (quit incremental search by pressing an arrow), press
@key{C-SPACE}, press @key{C-s node} and repeat @key{C-s} until you
have selected enough text, cut it with @key{C-w} or @key{C-x}, jump to
the right place (moving between nodes with the previous hint is often
useful) and paste with @key{C-y} or @key{C-v}.
@end itemize

@item Update sections finished in the English documentation; check
sections status at
@smallexample
@uref{http://lilypondwiki.tuxfamily.org/index.php?title=Documentation_coordination}.
@end smallexample

@item Update documentation PO.  It is recommended not to update
strings which come from documentation that is currently deeply revised
in English, to avoid doing the work more than once.

@item Fix broken cross-references by running (from @file{Documentation/})

@example
make ISOLANG=@var{YOUR-LANGUAGE} fix-xrefs
@end example

@noindent
This step requires a successful documentation build (with @command{make
doc}).  Some cross-references are broken because they point to a node
that exists in the documentation in English, which has not been added
to the translation; in this case, do not fix the cross-reference but
keep it "broken", so that the resulting HTML link will point to an
existing page of documentation in English.
@end enumerate

@subsubheading Rationale

You may wonder if it would not be better to leave translations as-is
until you can really start updating translations.  There are several
reasons to do these maintenance tasks right now.

@itemize
@item This will have to be done sooner or later anyway, before updating
translation of documentation contents, and this can already be done
without needing to be redone later, as sections of documentation in
English are mostly revised once.  However, note that not all
documentation sectioning has been revised in one go, so all this
maintenance plan has to be repeated whenever a big reorganization is
made.

@item This just makes translated documentation take advantage of the new
organization, which is better than the old one.

@item Moving and renaming sections to match sectioning of documentation in
English simplify future updating work: it allows updating the
translation by side-by-side comparison, without bothering whether
cross-reference names already exist in the translation.

@item Each maintenance task except @q{Updating PO files} can be done by
the same person for all languages, which saves overall time spent by
translators to achieve this task: the node names and section titles
are in English, so you can do.  It is important to take advantage of
this now, as it will be more complicated (but still possible) to do
step 3 in all languages when documentation is compiled with
@command{texi2html} and node names are directly translated in source
files.
@end itemize


@node Managing documentation translation with Git
@unnumberedsubsubsec Managing documentation translation with Git

This policy explains how to manage Git branches and commit
translations to Git.

@itemize
@item Translation work is made on
@code{translation} branch.  This branch is merged on
@code{staging} once a week, approximately.  Then,
@code{master} branch is merged on
@code{translation}, where the check-translation script (see
@ref{Check state of translation}) shows changes in English docs which
should be translated, and the cycle starts again.

@item Translations may be pushed directly to
@code{staging} only if they do not break compilation of LilyPond and
its documentation.  Those changes could be pushed to
@code{translation} too, or alternatively translators could wait until
they come from
@code{master} the next time it is merged on
@code{translation}.  Similarly, changes matching
@code{stable/X.Y} are preferably made on
@code{X.Ytranslation}.

@item @code{translation} Git branch may be merged into
@code{staging} branch only if LilyPond (@command{make all}) and
documentation (@command{make doc}) compile successfully.

@item @command{make} and @command{make doc} are usually successful in
@code{master} Git branch because those tests should have already
succeeded in
@code{staging} branch before merging.
@code{master} branch may be merged into
@code{translation} when significant changes had been made in
documentation in English in
@code{master} branch.

@item General maintenance may be done by anybody who knows what he does
in documentation in all languages, without informing translators
first.  General maintenance include simple text substitutions
(e.g. automated by sed), compilation fixes, updating Texinfo or
lilypond-book commands, updating macros, updating ly code, fixing
cross-references, and operations described in
@ref{Maintaining without updating translations}.
@end itemize


@node Technical background
@subsection Technical background

A number of Python scripts handle a part of the documentation
translation process.  All scripts used to maintain the translations
are located in @file{scripts/auxiliar/}.

@itemize
@item @file{check_translation.py}  -- show diff to update a translation,
@item @file{texi-langutils.py}  -- quickly and dirtily parse Texinfo files to
make message catalogs and Texinfo skeleton files,
@item @file{texi-skeleton-update.py} -- update Texinfo skeleton files,
@item @file{update-snippets.py} -- synchronize ly snippets with those
from English docs,
@item @file{translations-status.py} -- update translations status pages and word
counts in the file you are reading,
@item @file{tely-gettext.py} -- gettext node names, section titles and references
in the sources; WARNING only use this script once for each file, when support for
"makeinfo --html" has been dropped.
@end itemize

Other scripts are used in the build process, in @file{scripts/build/}:

@itemize
@item @file{mass-link.py} -- link or symlink files between English documentation
and documentation in other languages.
@end itemize

Python modules used by scripts in @file{scripts/auxiliar/} or @file{scripts/build/} (but
not by installed Python scripts) are located in @file{python/auxiliar/}:
@itemize
@item @file{manuals_definitions.py} -- define manual names and name of
cross-reference Texinfo macros,
@item @file{buildlib.py} -- common functions (read piped output
of a shell command, use Git),
@item @file{postprocess_html.py} (module imported by @file{www_post.py}) -- add footer and
tweak links in HTML pages.
@end itemize

And finally
@itemize
@item @file{python/langdefs.py}  -- language definitions module
@end itemize