From: Jacob Alexander <haata@kiibohd.com>
Date: Fri, 19 Jun 2015 08:50:56 +0000 (-0700)
Subject: Adding timing based debounce code
X-Git-Url: https://git.donarmstrong.com/?p=kiibohd-controller.git;a=commitdiff_plain;h=98f796d4df16c5aa14d0d07a5250c589dfb5f13a

Adding timing based debounce code

- Uses expiry timer to decide on when to allow a state change
- Initial state transitions are unaffected
- Use MinDebounceTime define in kll to configure
- ms granularity
---

diff --git a/Scan/MatrixARM/capabilities.kll b/Scan/MatrixARM/capabilities.kll
index 8221ec8..fe0192d 100644
--- a/Scan/MatrixARM/capabilities.kll
+++ b/Scan/MatrixARM/capabilities.kll
@@ -32,3 +32,10 @@ DebounceThrottleDiv => DebounceThrottleDiv_define;
 DebounceThrottleDiv = 0; # Default
 #DebounceThrottleDiv = 2; # /4 divider
 
+# This defines the minimum amount of time after a transition until allowing another transition
+# Generally switches require a minimum 5 ms debounce period
+# Since a decision can usually be made quite quickly, there is little latency on each press
+# However, this defines the latency at which the switch state can change
+MinDebounceTime => MinDebounceTime_define;
+MinDebounceTime = 5; # 5 ms
+
diff --git a/Scan/MatrixARM/matrix_scan.c b/Scan/MatrixARM/matrix_scan.c
index 85f8205..a48e287 100644
--- a/Scan/MatrixARM/matrix_scan.c
+++ b/Scan/MatrixARM/matrix_scan.c
@@ -82,6 +82,9 @@ uint16_t matrixMaxScans  = 0;
 uint16_t matrixCurScans  = 0;
 uint16_t matrixPrevScans = 0;
 
+// System Timer used for delaying debounce decisions
+extern volatile uint32_t systick_millis_count;
+
 
 
 // ----- Functions -----
@@ -197,10 +200,11 @@ void Matrix_setup()
 	// Clear out Debounce Array
 	for ( uint8_t item = 0; item < Matrix_maxKeys; item++ )
 	{
-		Matrix_scanArray[ item ].prevState     = KeyState_Off;
-		Matrix_scanArray[ item ].curState      = KeyState_Off;
-		Matrix_scanArray[ item ].activeCount   = 0;
-		Matrix_scanArray[ item ].inactiveCount = DebounceDivThreshold_define; // Start at 'off' steady state
+		Matrix_scanArray[ item ].prevState        = KeyState_Off;
+		Matrix_scanArray[ item ].curState         = KeyState_Off;
+		Matrix_scanArray[ item ].activeCount      = 0;
+		Matrix_scanArray[ item ].inactiveCount    = DebounceDivThreshold_define; // Start at 'off' steady state
+		Matrix_scanArray[ item ].prevDecisionTime = 0;
 	}
 
 	// Clear scan stats counters
@@ -262,6 +266,9 @@ void Matrix_scan( uint16_t scanNum )
 		matrixCurScans++;
 	}
 
+	// Read systick for event scheduling
+	uint8_t currentTime = (uint8_t)systick_millis_count;
+
 	// For each strobe, scan each of the sense pins
 	for ( uint8_t strobe = 0; strobe < Matrix_colsNum; strobe++ )
 	{
@@ -305,11 +312,16 @@ void Matrix_scan( uint16_t scanNum )
 			}
 
 			// Check for state change if it hasn't been set
+			// But only if enough time has passed since last state change
 			// Only check if the minimum number of scans has been met
 			//   the current state is invalid
 			//   and either active or inactive count is over the debounce threshold
 			if ( state->curState == KeyState_Invalid )
 			{
+				// Determine time since last decision
+				uint8_t lastTransition = currentTime - state->prevDecisionTime;
+
+				// Attempt state transition
 				switch ( state->prevState )
 				{
 				case KeyState_Press:
@@ -320,6 +332,15 @@ void Matrix_scan( uint16_t scanNum )
 					}
 					else
 					{
+						// If not enough time has passed since Hold
+						// Keep previous state
+						if ( lastTransition < MinDebounceTime_define )
+						{
+							//warn_print("FAST Release stopped");
+							state->curState = state->prevState;
+							continue;
+						}
+
 						state->curState = KeyState_Release;
 					}
 					break;
@@ -328,6 +349,15 @@ void Matrix_scan( uint16_t scanNum )
 				case KeyState_Off:
 					if ( state->activeCount > state->inactiveCount )
 					{
+						// If not enough time has passed since Hold
+						// Keep previous state
+						if ( lastTransition < MinDebounceTime_define )
+						{
+							//warn_print("FAST Press stopped");
+							state->curState = state->prevState;
+							continue;
+						}
+
 						state->curState = KeyState_Press;
 					}
 					else
@@ -342,6 +372,9 @@ void Matrix_scan( uint16_t scanNum )
 					break;
 				}
 
+				// Update decision time
+				state->prevDecisionTime = currentTime;
+
 				// Send keystate to macro module
 				Macro_keyState( key, state->curState );
 
diff --git a/Scan/MatrixARM/matrix_scan.h b/Scan/MatrixARM/matrix_scan.h
index 06ae75f..810e6d9 100644
--- a/Scan/MatrixARM/matrix_scan.h
+++ b/Scan/MatrixARM/matrix_scan.h
@@ -40,6 +40,12 @@
 #error "Debounce threshold is too high... 32 bit max. Check .kll defines."
 #endif
 
+#if   ( MinDebounceTime_define > 0xFF )
+#error "MinDebounceTime is a maximum of 255 ms"
+#elif ( MinDebounceTime_define < 0x00 )
+#error "MinDebounceTime is a minimum 0 ms"
+#endif
+
 
 
 // ----- Enums -----
@@ -126,11 +132,12 @@ typedef struct GPIO_Pin {
 
 // Debounce Element
 typedef struct KeyState {
-	KeyPosition     prevState;
-	KeyPosition     curState;
 	DebounceCounter activeCount;
 	DebounceCounter inactiveCount;
-} KeyState;
+	KeyPosition     prevState;
+	KeyPosition     curState;
+	uint8_t         prevDecisionTime;
+} __attribute__((packed)) KeyState;