is used by, a significant number of packages, and
therefore should not be changed without peer
review. Package maintainers can then rely on this
- interfaces not changing, and the package
- management software authors need to ensure
- compatibility with these interface
- definitions. (Control file and changelog file
- formats are examples.)
+ interface not changing, and the package management
+ software authors need to ensure compatibility with
+ this interface definition. (Control file and
+ changelog file formats are examples.)
</item>
<tag>Chosen Convention</tag>
<item>
The Debian Free Software Guidelines (DFSG) form our
definition of "free software". These are:
<taglist>
- <tag>Free Redistribution
+ <tag>1. Free Redistribution
</tag>
<item>
The license of a Debian component may not restrict any
sources. The license may not require a royalty or
other fee for such sale.
</item>
- <tag>Source Code
+ <tag>2. Source Code
</tag>
<item>
The program must include source code, and must allow
distribution in source code as well as compiled form.
</item>
- <tag>Derived Works
+ <tag>3. Derived Works
</tag>
<item>
The license must allow modifications and derived
works, and must allow them to be distributed under the
same terms as the license of the original software.
</item>
- <tag>Integrity of The Author's Source Code
+ <tag>4. Integrity of The Author's Source Code
</tag>
<item>
The license may restrict source-code from being
Project encourages all authors to not restrict any
files, source or binary, from being modified.)
</item>
- <tag>No Discrimination Against Persons or Groups
+ <tag>5. No Discrimination Against Persons or Groups
</tag>
<item>
The license must not discriminate against any person
or group of persons.
</item>
- <tag>No Discrimination Against Fields of Endeavor
+ <tag>6. No Discrimination Against Fields of Endeavor
</tag>
<item>
The license must not restrict anyone from making use
used in a business, or from being used for genetic
research.
</item>
- <tag>Distribution of License
+ <tag>7. Distribution of License
</tag>
<item>
The rights attached to the program must apply to all
for execution of an additional license by those
parties.
</item>
- <tag>License Must Not Be Specific to Debian
+ <tag>8. License Must Not Be Specific to Debian
</tag>
<item>
The rights attached to the program must not depend on
rights as those that are granted in conjunction with
the Debian system.
</item>
- <tag>License Must Not Contaminate Other Software
+ <tag>9. License Must Not Contaminate Other Software
</tag>
<item>
The license must not place restrictions on other
that all other programs distributed on the same medium
must be free software.
</item>
- <tag>Example Licenses
+ <tag>10. Example Licenses
</tag>
<item>
The "GPL," "BSD," and "Artistic" licenses are examples of
<p>
It must start with the line <tt>#!/usr/bin/make -f</tt>,
so that it can be invoked by saying its name rather than
- invoking <prgn>make</prgn> explicitly.
+ invoking <prgn>make</prgn> explicitly. That is, invoking
+ either of <tt>make -f debian/rules <em>args...</em></tt>
+ or <tt>./debian/rules <em>args...</em></tt> must result in
+ identical behavior.
</p>
<p>
Since an interactive <file>debian/rules</file> script makes it
impossible to auto-compile that package and also makes it
hard for other people to reproduce the same binary
- package, all <em>required targets</em> MUST be
+ package, all <em>required targets</em> must be
non-interactive. At a minimum, required targets are the
ones called by <prgn>dpkg-buildpackage</prgn>, namely,
<em>clean</em>, <em>binary</em>, <em>binary-arch</em>,
<heading><tt>Priority</tt></heading>
<p>
- This field represents how important that it is that the user
+ This field represents how important it is that the user
have the package installed. See <ref id="priorities">.
</p>
</p>
<p>
- See <ref id="debianrules"> for information how to get the
- architecture for the build process.
+ See <ref id="debianrules"> for information on how to get
+ the architecture for the build process.
</p>
</sect1>
<p>
Thus only the first three components of the policy version
are significant in the <em>Standards-Version</em> control
- field, and so either these three components or the all
- four components may be specified.<footnote>
+ field, and so either these three components or all four
+ components may be specified.<footnote>
In the past, people specified the full version number
in the Standards-Version field, for example "2.3.0.0".
Since minor patch-level changes don't introduce new
for the most recent version should be returned first, and
entries should be separated by the representation of a
blank line (the "title" line may also be followed by the
- representation of blank line).
+ representation of a blank line).
</p>
</sect1>
no new original source archive is being distributed the
<tt>.dsc</tt> must still contain the <tt>Files</tt> field
entry for the original source archive
- <file><var>package</var>-<var>upstream-version</var>.orig.tar.gz</file>,
+ <file><var>package</var>_<var>upstream-version</var>.orig.tar.gz</file>,
but the <file>.changes</file> file should leave it out. In
this case the original source archive on the distribution
site must match exactly, byte-for-byte, the original
</example>
If this works, then the old-version is
"Installed", if not, the old version is in a
- "Failed-Config" state.
+ "Half-Configured" state.
</item>
</enumlist>
</item>
If this fails, the package is left in a
"Half-Installed" state, which requires a
reinstall. If it works, the packages is left in
- a "Config Files" state.
+ a "Config-Files" state.
</item>
<item>
Otherwise (i.e., the package was completely purged):
<var>new-postrm</var> abort-install
</example>
If the error-unwind fails, the package is in a
- "Half Installed" phase, and requires a
+ "Half-Installed" phase, and requires a
reinstall. If the error unwind works, the
package is in a not installed state.
</item>
<example compact="compact">
<var>old-preinst</var> abort-upgrade <var>new-version</var>
</example>
- If this fails, the old version is left in an
- "Half Installed" state. If it works, dpkg now
+ If this fails, the old version is left in a
+ "Half-Installed" state. If it works, dpkg now
calls:
<example compact="compact">
<var>new-postrm</var> abort-upgrade <var>old-version</var>
</example>
- If this fails, the old version is left in an
- "Half Installed" state. If it works, dpkg now
+ If this fails, the old version is left in a
+ "Half-Installed" state. If it works, dpkg now
calls:
<example compact="compact">
<var>old-postinst</var> abort-upgrade <var>new-version</var>
</example>
</p>
<p>
- If this fails, the package is in a "Failed-Config"
+ If this fails, the package is in a "Half-Configured"
state, or else it remains "Installed".
</p>
</item>
be <em>unpacked</em> the pre-dependency can be
satisfied if the depended-on package is either fully
configured, <em>or even if</em> the depended-on
- package(s) are only unpacked or half-configured,
- provided that they have been configured correctly at
- some point in the past (and not removed or partially
- removed since). In this case, both the
+ package(s) are only unpacked or in the "Half-Configured"
+ state, provided that they have been configured
+ correctly at some point in the past (and not removed
+ or partially removed since). In this case, both the
previously-configured and currently unpacked or
- half-configured versions must satisfy any version
+ "Half-Configured" versions must satisfy any version
clause in the <tt>Pre-Depends</tt> field.
</p>
<p>
A package will not be regarded as causing breakage merely
because its configuration files are still installed; it must
- be at least half-installed.
+ be at least "Half-Installed".
</p>
<p>
<p>
A package will not cause a conflict merely because its
configuration files are still installed; it must be at least
- half-installed.
+ "Half-Installed".
</p>
<p>
</p>
<p>
- If you are creating a udeb for use in the Debian Installer, you
- will need to specify that <prgn>dpkg-shlibdeps</prgn> should use
- the dependency line of type <tt>udeb</tt> by adding
- <tt>-tudeb</tt> as option<footnote>
+ If you are creating a udeb for use in the Debian Installer,
+ you will need to specify that <prgn>dpkg-shlibdeps</prgn>
+ should use the dependency line of type <tt>udeb</tt> by
+ adding the <tt>-tudeb</tt> option<footnote>
<prgn>dh_shlibdeps</prgn> from the <tt>debhelper</tt> suite
will automatically add this option if it knows it is
processing a udeb.
symlinked there, is relaxed to a recommendation.
</p>
</item>
+ <item>
+ <p>
+ The following directories in the root filesystem are
+ additionally allowed: <file>/sys</file> and
+ <file>/selinux</file>. <footnote>These directories
+ are used as mount points to mount virtual filesystems
+ to get access to kernel information.</footnote>
+ </p>
+ </item>
</enumlist>
</p>
</p>
<p>
- Note, that this applies only to directories <em>below</em>
- <file>/usr/local</file>, not <em>in</em> <file>/usr/local</file>.
- Packages must not create sub-directories in the directory
- <file>/usr/local</file> itself, except those listed in FHS,
- section 4.5. However, you may create directories below
- them as you wish. You must not remove any of the
- directories listed in 4.5, even if you created them.
+ Note that this applies only to
+ directories <em>below</em> <file>/usr/local</file>,
+ not <em>in</em> <file>/usr/local</file>. Packages must
+ not create sub-directories in the
+ directory <file>/usr/local</file> itself, except those
+ listed in FHS, section 4.5. However, you may create
+ directories below them as you wish. You must not remove
+ any of the directories listed in 4.5, even if you created
+ them.
</p>
<p>
<sect1>
<heading>The system-wide mail directory</heading>
<p>
- The system-wide mail directory is <file>/var/mail</file>. This
- directory is part of the base system and should not owned
- by any particular mail agents. The use of the old
+ The system-wide mail directory
+ is <file>/var/mail</file>. This directory is part of the
+ base system and should not be owned by any particular mail
+ agents. The use of the old
location <file>/var/spool/mail</file> is deprecated, even
though the spool may still be physically located there.
</p>
<prgn>anacron</prgn>. Thus, you should only use this
directory for jobs which may be skipped if the system is not
running.)</p>
+ <p>
+ Unlike <file>crontab</file> files described in the IEEE Std
+ 1003.1-2008 (POSIX.1) available from
+ <url id="http://www.opengroup.org/onlinepubs/9699919799/"
+ name="The Open Group">, the files in
+ <file>/etc/cron.d</file> and the file
+ <file>/etc/crontab</file> have seven fields; namely:
+ <enumlist>
+ <item>Minute [0,59]</item>
+ <item>Hour [0,23]</item>
+ <item>Day of the month [1,31]</item>
+ <item>Month of the year [1,12]</item>
+ <item>Day of the week ([0,6] with 0=Sunday)</item>
+ <item>Username</item>
+ <item>Command to be run</item>
+ </enumlist>
+ Ranges of numbers are allowed. Ranges are two numbers
+ separated with a hyphen. The specified range is inclusive.
+ Lists are allowed. A list is a set of numbers (or ranges)
+ separated by commas. Step values can be used in conjunction
+ with ranges.
+ </p>
<p>
- The scripts or crontab entries in these directories should
+ The scripts or <tt>crontab</tt> entries in these directories should
check if all necessary programs are installed before they
try to execute them. Otherwise, problems will arise when a
package was removed but not purged since configuration files
- are kept on the system in this situation.</p>
+ are kept on the system in this situation.
+ </p>
+
+ <p>
+ Any <tt>cron</tt> daemon must provide
+ <file>/usr/bin/crontab</file> and support normal
+ <tt>crontab</tt> entries as specified in POSIX. The daemon
+ must also support names for days and months, ranges, and
+ step values. It has to support <file>/etc/crontab</file>,
+ and correctly execute the scripts in
+ <file>/etc/cron.d</file>. The daemon must also correctly
+ execute scripts in
+ <file>/etc/cron.{hourly,daily,weekly,monthly}</file>.
+ </p>
</sect>
<sect id="menus">
<heading>Device files</heading>
<p>
- Packages must not include device files in the package file
- tree.
+ Packages must not include device files or named pipes in the
+ package file tree.
</p>
<p>
<file>/dev/cu*</file> devices should be changed to use
<file>/dev/ttyS*</file>.
</p>
+
+ <p>
+ Named pipes needed by the package must be created in
+ the <prgn>postinst</prgn> script<footnote>
+ It's better to use <prgn>mkfifo</prgn> rather
+ than <prgn>mknod</prgn> to create named pipes so that
+ automated checks for packages incorrectly creating device
+ files with <prgn>mknod</prgn> won't have false positives.
+ </footnote> and removed in
+ the <prgn>prerm</prgn> or <prgn>postrm</prgn> script as
+ appropriate.
+ </p>
</sect>
<sect id="config-files">
<p>
Customization of programs' X resources may also be
supported with the provision of a file with the same name
- as that of the package placed in the
- <file>/etc/X11/Xresources/</file> directory, which must
- registered as a <tt>conffile</tt> or handled as a
+ as that of the package placed in
+ the <file>/etc/X11/Xresources/</file> directory, which
+ must be registered as a <tt>conffile</tt> or handled as a
configuration file.<footnote>
Note that this mechanism is not the same as using
app-defaults; app-defaults are tied to the client
<p>
Please note that this does not override the section on
changelog files below, so the file
- <file>/usr/share/<var>package</var>/changelog.Debian.gz</file>
+ <file>/usr/share/doc/<var>package</var>/changelog.Debian.gz</file>
must refer to the changelog for the current version of
<var>package</var> in question. In practice, this means
that the sources of the target and the destination of the
projects / debian / debian-policy.git / blobdiff