msgid ""
msgstr ""
"Project-Id-Version: debhelper 8.0.0\n"
-"POT-Creation-Date: 2011-09-10 18:35-0400\n"
+"POT-Creation-Date: 2011-11-16 11:55-0400\n"
"PO-Revision-Date: 2010-11-11 22:28+0100\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
# type: =item
#. type: =item
-#: debhelper.pod:101 dh:56
+#: debhelper.pod:101 dh:64
msgid "B<--no-act>"
msgstr "B<--no-act>"
#. type: textblock
#: debhelper.pod:194
+#, fuzzy
+#| msgid ""
+#| "The following command line options are supported by all of the "
+#| "B<dh_auto_>I<*> debhelper programs. These programs support a variety of "
+#| "build systems, and normally heuristically determine which to use, and how "
+#| "to use them. You can use these command line options to override the "
+#| "default behavior."
msgid ""
"The following command line options are supported by all of the "
"B<dh_auto_>I<*> debhelper programs. These programs support a variety of "
"build systems, and normally heuristically determine which to use, and how to "
"use them. You can use these command line options to override the default "
-"behavior."
+"behavior. Typically these are passed to L<dh(1)>, which then passes them to "
+"all the B<dh_auto_>I<*> programs."
msgstr ""
"Las siguientes opciones de línea de órdenes son compatibles con todos los "
"programas B<dh_auto_>I<*> de debhelper. Estos programas permiten una "
# type: =item
#. type: =item
-#: debhelper.pod:201
+#: debhelper.pod:203
msgid "B<-S>I<buildsystem>, B<--buildsystem=>I<buildsystem>"
msgstr ""
"B<-S>I<sistema-de-construcción>, B<--buildsystem=>I<sistema-de-construcción>"
#. type: textblock
-#: debhelper.pod:203
+#: debhelper.pod:205
msgid ""
"Force use of the specified I<buildsystem>, instead of trying to auto-select "
"one which might be applicable for the package."
# type: =item
#. type: =item
-#: debhelper.pod:206
+#: debhelper.pod:208
msgid "B<-D>I<directory>, B<--sourcedirectory=>I<directory>"
msgstr "B<-D>I<directorio>, B<--sourcedirectory=>I<directorio>"
#. type: textblock
-#: debhelper.pod:208
+#: debhelper.pod:210
msgid ""
"Assume that the original package source tree is at the specified "
"I<directory> rather than the top level directory of the Debian source "
# type: =item
#. type: =item
-#: debhelper.pod:212
+#: debhelper.pod:214
msgid "B<-B>[I<directory>], B<--builddirectory=>[I<directory>]"
msgstr "B<-B>[I<directorio>], B<--builddirectory=>[I<directorio>]"
#. type: textblock
-#: debhelper.pod:214
+#: debhelper.pod:216
msgid ""
"Enable out of source building and use the specified I<directory> as the "
"build directory. If I<directory> parameter is omitted, a default build "
"de construcción predeterminado si se omite el parámetro I<directorio>."
#. type: textblock
-#: debhelper.pod:218
+#: debhelper.pod:220
msgid ""
"If this option is not specified, building will be done in source by default "
"unless the build system requires or prefers out of source tree building. In "
"builddirectory>."
#. type: textblock
-#: debhelper.pod:223
+#: debhelper.pod:225
msgid ""
"If the build system prefers out of source tree building but still allows in "
"source building, the latter can be re-enabled by passing a build directory "
# type: =item
#. type: =item
-#: debhelper.pod:227
+#: debhelper.pod:229
msgid "B<--parallel>"
msgstr "B<--parallel>"
#. type: textblock
-#: debhelper.pod:229
+#: debhelper.pod:231
msgid ""
"Enable parallel builds if underlying build system supports them. The number "
"of parallel jobs is controlled by the B<DEB_BUILD_OPTIONS> environment "
"sistema de construcción."
#. type: textblock
-#: debhelper.pod:234
+#: debhelper.pod:236
msgid ""
"If this option is not specified, debhelper currently defaults to not "
"allowing parallel package builds."
"paralelo de paquetes de forma predeterminada."
#. type: =item
-#: debhelper.pod:237
+#: debhelper.pod:239
msgid "B<--max-parallel=>I<maximum>"
msgstr "B<--max-parallel=>I<máximo>"
#. type: textblock
-#: debhelper.pod:239
+#: debhelper.pod:241
msgid ""
"This option implies B<--parallel> and allows further limiting the number of "
"jobs that can be used in a parallel build. If the package build is known to "
# type: =item
#. type: =item
-#: debhelper.pod:244 dh:52
+#: debhelper.pod:246 dh:60
msgid "B<--list>, B<-l>"
msgstr "B<--list>, B<-l>"
#. type: textblock
-#: debhelper.pod:246
+#: debhelper.pod:248
msgid ""
"List all build systems supported by debhelper on this system. The list "
"includes both default and third party build systems (marked as such). Also "
"buildsystem>."
#. type: =head1
-#: debhelper.pod:253
+#: debhelper.pod:255
msgid "COMPATABILITY LEVELS"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:255
+#: debhelper.pod:257
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
# type: textblock
#. type: textblock
-#: debhelper.pod:262
+#: debhelper.pod:264
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
"F<debian/compat>. For example, to turn on v8 mode:"
# type: verbatim
#. type: verbatim
-#: debhelper.pod:265
+#: debhelper.pod:267
#, no-wrap
msgid ""
" % echo 8 > debian/compat\n"
# type: textblock
#. type: textblock
-#: debhelper.pod:267
+#: debhelper.pod:269
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
# type: textblock
#. type: textblock
-#: debhelper.pod:274
+#: debhelper.pod:276
msgid "These are the available compatibility levels:"
msgstr "Los niveles de compatibilidad disponibles son:"
#. type: =item
-#: debhelper.pod:278
+#: debhelper.pod:280
msgid "v1"
msgstr "v1"
# type: textblock
#. type: textblock
-#: debhelper.pod:280
+#: debhelper.pod:282
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use F<debian/tmp> as the package tree "
# type: textblock
#. type: textblock
-#: debhelper.pod:285 debhelper.pod:292 debhelper.pod:315 debhelper.pod:344
+#: debhelper.pod:287 debhelper.pod:294 debhelper.pod:317 debhelper.pod:346
msgid "This mode is deprecated."
msgstr "Este modo está obsoleto."
#. type: =item
-#: debhelper.pod:287
+#: debhelper.pod:289
msgid "v2"
msgstr "v2"
# type: textblock
#. type: textblock
-#: debhelper.pod:289
+#: debhelper.pod:291
msgid ""
"In this mode, debhelper will consistently use debian/I<package> as the "
"package tree directory for every package that is built."
"el árbol de directorios para cada paquete que se construya."
#. type: =item
-#: debhelper.pod:294
+#: debhelper.pod:296
msgid "v3"
msgstr "v3"
# type: textblock
#. type: textblock
-#: debhelper.pod:296
+#: debhelper.pod:298
msgid "This mode works like v2, with the following additions:"
msgstr "Este modo funciona como v2, con los siguientes añadidos:"
# type: =item
#. type: =item
-#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323
-#: debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352
-#: debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377
-#: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407
-#: debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437
-#: debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468
-#: debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489
+#: debhelper.pod:302 debhelper.pod:307 debhelper.pod:311 debhelper.pod:325
+#: debhelper.pod:330 debhelper.pod:335 debhelper.pod:340 debhelper.pod:354
+#: debhelper.pod:358 debhelper.pod:363 debhelper.pod:367 debhelper.pod:379
+#: debhelper.pod:384 debhelper.pod:390 debhelper.pod:396 debhelper.pod:409
+#: debhelper.pod:416 debhelper.pod:420 debhelper.pod:424 debhelper.pod:439
+#: debhelper.pod:443 debhelper.pod:451 debhelper.pod:456 debhelper.pod:470
+#: debhelper.pod:475 debhelper.pod:482 debhelper.pod:487 debhelper.pod:492
+#: debhelper.pod:496 debhelper.pod:502
msgid "-"
msgstr "-"
# type: textblock
#. type: textblock
-#: debhelper.pod:302
+#: debhelper.pod:304
msgid ""
"Debhelper config files support globbing via B<*> and B<?>, when appropriate. "
"To turn this off and use those characters raw, just prefix with a backslash."
# type: textblock
#. type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:309
msgid ""
"B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call "
"B<ldconfig>."
# type: textblock
#. type: textblock
-#: debhelper.pod:311
+#: debhelper.pod:313
msgid ""
"Every file in F<etc/> is automatically flagged as a conffile by "
"B<dh_installdeb>."
"conffiles."
#. type: =item
-#: debhelper.pod:317
+#: debhelper.pod:319
msgid "v4"
msgstr "v4"
#. type: textblock
-#: debhelper.pod:319
+#: debhelper.pod:321
msgid "Changes from v3 are:"
msgstr "Los cambios desde el nivel v3 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:325
+#: debhelper.pod:327
msgid ""
"B<dh_makeshlibs -V> will not include the Debian part of the version number "
"in the generated dependency line in the shlibs file."
# type: textblock
#. type: textblock
-#: debhelper.pod:330
+#: debhelper.pod:332
msgid ""
"You are encouraged to put the new B<${misc:Depends}> into F<debian/control> "
"to supplement the B<${shlibs:Depends}> field."
# type: textblock
#. type: textblock
-#: debhelper.pod:335
+#: debhelper.pod:337
msgid ""
"B<dh_fixperms> will make all files in F<bin/> directories and in F<etc/init."
"d> executable."
# type: textblock
#. type: textblock
-#: debhelper.pod:340
+#: debhelper.pod:342
msgid "B<dh_link> will correct existing links to conform with policy."
msgstr ""
"B<dh_link> corregirá los enlaces existentes para ajustarse a las normas de "
"Debian."
#. type: =item
-#: debhelper.pod:346
+#: debhelper.pod:348
msgid "v5"
msgstr "v5"
#. type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:350
msgid "Changes from v4 are:"
msgstr "Los cambios desde el nivel v4 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:354
+#: debhelper.pod:356
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Se ignoran los comentarios en los ficheros de configuración de debhelper."
# type: textblock
#. type: textblock
-#: debhelper.pod:358
+#: debhelper.pod:360
msgid ""
"B<dh_strip --dbg-package> now specifies the name of a package to put "
"debugging symbols in, not the packages to take the symbols from."
# type: textblock
#. type: textblock
-#: debhelper.pod:363
+#: debhelper.pod:365
msgid "B<dh_installdocs> skips installing empty files."
msgstr "B<dh_installdocs> omite la instalación de ficheros vacíos."
# type: textblock
#. type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:369
msgid "B<dh_install> errors out if wildcards expand to nothing."
msgstr ""
"B<dh_install> devuelve un error si los comodines se expanden a un valor "
"vacío."
#. type: =item
-#: debhelper.pod:371
+#: debhelper.pod:373
msgid "v6"
msgstr "v6"
#. type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:375
msgid "Changes from v5 are:"
msgstr "Los cambios desde el nivel v5 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:379
+#: debhelper.pod:381
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the F<prerm> and F<postrm> scripts."
# type: textblock
#. type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:386
msgid ""
"B<dh_installwm> will install a slave manpage link for F<x-window-manager.1."
"gz>, if it sees the man page in F<usr/share/man/man1> in the package build "
# type: textblock
#. type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:392
msgid ""
"B<dh_builddeb> did not previously delete everything matching "
"B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as "
# type: textblock
#. type: textblock
-#: debhelper.pod:396
+#: debhelper.pod:398
msgid ""
"B<dh_installman> allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
"anteriores simplemente rechazaba hacerlo, de forma silenciosa."
#. type: =item
-#: debhelper.pod:401
+#: debhelper.pod:403
msgid "v7"
msgstr "v7"
#. type: textblock
-#: debhelper.pod:403
+#: debhelper.pod:405
msgid "Changes from v6 are:"
msgstr "Los cambios desde el nivel v6 son:"
# type: textblock
#. type: textblock
-#: debhelper.pod:409
+#: debhelper.pod:411
msgid ""
"B<dh_install>, will fall back to looking for files in F<debian/tmp> if it "
"doesn't find them in the current directory (or wherever you tell it look "
# type: textblock
#. type: textblock
-#: debhelper.pod:416
+#: debhelper.pod:418
msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
msgstr ""
"B<dh_clean> leerá F<debian/clean> y eliminará los ficheros ahí listados."
# type: textblock
#. type: textblock
-#: debhelper.pod:420
+#: debhelper.pod:422
msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
msgstr "B<dh_clean> eliminará ficheros F<*-stamp> del nivel superior."
# type: textblock
#. type: textblock
-#: debhelper.pod:424
+#: debhelper.pod:426
msgid ""
"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
"none is specified."
"cambios de la fuente original si no se especifica ninguno."
#. type: =item
-#: debhelper.pod:429
+#: debhelper.pod:431
msgid "v8"
msgstr "v8"
# type: textblock
#. type: textblock
-#: debhelper.pod:431
+#: debhelper.pod:433
msgid "This is the recommended mode of operation."
msgstr "Este es el modo de operación aconsejado."
#. type: textblock
-#: debhelper.pod:433
+#: debhelper.pod:435
msgid "Changes from v7 are:"
msgstr "Los cambios desde el nivel v7 son:"
#. type: textblock
-#: debhelper.pod:439
+#: debhelper.pod:441
msgid ""
"Commands will fail rather than warning when they are passed unknown options."
msgstr ""
"opciones desconocidas."
#. type: textblock
-#: debhelper.pod:443
+#: debhelper.pod:445
msgid ""
"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
"generates shlibs files for. So B<-X> can be used to exclude libraries. "
"comportamiento que puede impedir la construcción de algunos paquetes."
#. type: textblock
-#: debhelper.pod:451
+#: debhelper.pod:453
msgid ""
"B<dh> requires the sequence to run be specified as the first parameter, and "
"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo $@>"
"B<dh $@ --foo>, no B<dh --foo $@>."
#. type: textblock
-#: debhelper.pod:456
+#: debhelper.pod:458
msgid ""
"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
"F<Makefile.PL>."
"preferencia a un fichero F<Makefile.PL>."
#. type: =item
-#: debhelper.pod:460
+#: debhelper.pod:462
msgid "v9"
msgstr ""
#. type: textblock
-#: debhelper.pod:462
+#: debhelper.pod:464
msgid ""
"This compatibility level is still open for development; use with caution."
msgstr ""
#. type: textblock
-#: debhelper.pod:464
+#: debhelper.pod:466
#, fuzzy
#| msgid "Changes from v3 are:"
msgid "Changes from v8 are:"
msgstr "Los cambios desde el nivel v3 son:"
#. type: textblock
-#: debhelper.pod:470
+#: debhelper.pod:472
msgid ""
"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
"directories to autoconf in --libdir and --libexecdir."
msgstr ""
#. type: textblock
-#: debhelper.pod:475
+#: debhelper.pod:477
msgid ""
"dh is aware of the usual dependencies between targets in debian/rules. So, "
"\"dh binary\" will run any build, build-arch, build-indep, install, etc "
msgstr ""
#. type: textblock
-#: debhelper.pod:482
+#: debhelper.pod:484
+msgid ""
+"B<dh_strip> compresses debugging symbol files to reduce the installed size "
+"of -dbg packages."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:489
msgid ""
"B<dh_auto_configure> does not include the source package name in --"
"libexecdir when using autoconf."
msgstr ""
#. type: textblock
-#: debhelper.pod:487
+#: debhelper.pod:494
msgid "B<dh> does not default to enabling --with=python-support"
msgstr ""
#. type: textblock
-#: debhelper.pod:491
+#: debhelper.pod:498
msgid ""
"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
"variables listed by B<dpkg-buildflags>, unless they are already set. They "
"support DEB_BUILD_OPTIONS=noopt too."
msgstr ""
+#. type: textblock
+#: debhelper.pod:504
+msgid ""
+"B<dh_auto_configure> passes CFLAGS to perl F<Makefile.PL> and F<Build.PL>"
+msgstr ""
+
# type: =head1
#. type: =head1
-#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116
+#: debhelper.pod:511 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116
#: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
#: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
#: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
# type: =head2
#. type: =head2
-#: debhelper.pod:501
+#: debhelper.pod:513
msgid "Multiple binary package support"
msgstr "Compatibilidad con varios paquetes binarios"
# type: textblock
#. type: textblock
-#: debhelper.pod:503
+#: debhelper.pod:515
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
# type: textblock
#. type: textblock
-#: debhelper.pod:511
+#: debhelper.pod:523
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
# type: =head2
#. type: =head2
-#: debhelper.pod:517
+#: debhelper.pod:529
msgid "Automatic generation of Debian install scripts"
msgstr "Generación automática de los scripts de instalación de Debian"
# type: textblock
#. type: textblock
-#: debhelper.pod:519
+#: debhelper.pod:531
msgid ""
"Some debhelper commands will automatically generate parts of Debian "
"maintainer scripts. If you want these automatically generated things "
# type: textblock
#. type: textblock
-#: debhelper.pod:526
+#: debhelper.pod:538
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
# type: textblock
#. type: textblock
-#: debhelper.pod:529
+#: debhelper.pod:541
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
# type: textblock
#. type: textblock
-#: debhelper.pod:532
+#: debhelper.pod:544
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a Perl script. If you would like to embed it into a Perl script, here "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:537
+#: debhelper.pod:549
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
# type: =head2
#. type: =head2
-#: debhelper.pod:543
+#: debhelper.pod:555
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Generación automática de diversas dependencias."
# type: textblock
#. type: textblock
-#: debhelper.pod:545
+#: debhelper.pod:557
#, fuzzy
#| msgid ""
#| "Some debhelper commands may make the generated package need to depend on "
# type: textblock
#. type: textblock
-#: debhelper.pod:553
+#: debhelper.pod:565
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called B<"
# type: textblock
#. type: textblock
-#: debhelper.pod:558
+#: debhelper.pod:570
msgid ""
"This is entirely independent of the standard B<${shlibs:Depends}> generated "
"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)"
# type: =head2
#. type: =head2
-#: debhelper.pod:563
+#: debhelper.pod:575
msgid "Package build directories"
msgstr "Directorios de construcción del paquete"
# type: textblock
#. type: textblock
-#: debhelper.pod:565
+#: debhelper.pod:577
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/I<package>."
# type: textblock
#. type: textblock
-#: debhelper.pod:568
+#: debhelper.pod:580
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the B<-P> flag. For example, \"B<dh_installdocs -Pdebian/tmp>"
# type: =head2
#. type: =head2
-#: debhelper.pod:576
+#: debhelper.pod:588
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:578
+#: debhelper.pod:590
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
"F<preinst>, F<postrm>, F<prerm>, scripts F<config>, etc."
#. type: =head2
-#: debhelper.pod:585
+#: debhelper.pod:597
msgid "Build depends"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:587
+#: debhelper.pod:599
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:593
+#: debhelper.pod:605
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
# type: =head1
#. type: =head1
-#: debhelper.pod:595
+#: debhelper.pod:607
msgid "ENVIRONMENT"
msgstr "ENTORNO"
# type: =item
#. type: =item
-#: debhelper.pod:599
+#: debhelper.pod:611
msgid "B<DH_VERBOSE>"
msgstr "B<DH_VERBOSE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:601
+#: debhelper.pod:613
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
# type: =item
#. type: =item
-#: debhelper.pod:604
+#: debhelper.pod:616
msgid "B<DH_COMPAT>"
msgstr "B<DH_COMPAT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:606
+#: debhelper.pod:618
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
# type: =item
#. type: =item
-#: debhelper.pod:609
+#: debhelper.pod:621
msgid "B<DH_NO_ACT>"
msgstr "B<DH_NO_ACT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:611
+#: debhelper.pod:623
msgid "Set to B<1> to enable no-act mode."
msgstr "Defina como B<1> para habilitar el modo no-act."
# type: =item
#. type: =item
-#: debhelper.pod:613
+#: debhelper.pod:625
msgid "B<DH_OPTIONS>"
msgstr "B<DH_OPTIONS>"
# type: textblock
#. type: textblock
-#: debhelper.pod:615
+#: debhelper.pod:627
+#, fuzzy
+#| msgid ""
+#| "Anything in this variable will be prepended to the command line arguments "
+#| "of all debhelper commands. Command-specific options will be ignored by "
+#| "commands that do not support them."
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
-"all debhelper commands. Command-specific options will be ignored by commands "
-"that do not support them."
+"all debhelper commands."
msgstr ""
"Cualquier dato contenido en esta variable se añadirá a los argumentos de "
"línea de órdenes de todas las órdenes de debhelper. Las opciones específicas "
"a ciertas ordenes se ignorarán por las órdenes que no las acepten."
-# type: textblock
#. type: textblock
-#: debhelper.pod:619
+#: debhelper.pod:630
msgid ""
-"This is useful in some situations, for example, if you need to pass B<-p> to "
-"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
-"is by using \"Target-specific Variable Values\" in your F<debian/rules> "
-"file. See the make documentation for details on doing this."
+"When using L<dh(1)>, it can be passed options that will be passed on to each "
+"debhelper command, which is generally better than using DH_OPTIONS."
msgstr ""
-"Esto es útil en algunas situaciones, por ejemplo, si necesita introducir la "
-"opción B<-p> a todas las órdenes de debhelper que va a utilizar. Una buena "
-"manera de dar un valor a B<DH_OPTIONS> es usando «Target-specific Variable "
-"Valores» en su fichero F<debian/rules>. Consulte la documentación de make "
-"para los detalles sobre cómo hacer esto."
# type: =item
#. type: =item
-#: debhelper.pod:624
+#: debhelper.pod:633
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr "B<DH_ALWAYS_EXCLUDE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:626
+#: debhelper.pod:635
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
# type: textblock
#. type: textblock
-#: debhelper.pod:630
+#: debhelper.pod:639
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
# type: textblock
#. type: textblock
-#: debhelper.pod:637
+#: debhelper.pod:646
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
# type: =head1
#. type: =head1
-#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50
-#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
-#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
+#: debhelper.pod:651 dh:890 dh_auto_build:47 dh_auto_clean:50
+#: dh_auto_configure:52 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
+#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:127
#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
#: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
#: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275
-#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259
+#: dh_installlogcheck:78 dh_installlogrotate:50 dh_installman:259
#: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95
#: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115
#: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57
#: dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170
#: dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171
-#: dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27
+#: dh_strip:235 dh_suidregister:117 dh_testdir:44 dh_testroot:27
#: dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr "VÉASE TAMBIÉN"
# type: =item
#. type: =item
-#: debhelper.pod:646
+#: debhelper.pod:655
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:648
+#: debhelper.pod:657
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr "Varios ficheros de ejemplo F<debian/rules> que usan debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:650
+#: debhelper.pod:659
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:652
+#: debhelper.pod:661
msgid "Debhelper web site."
msgstr "Sitio web de Debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56
-#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
-#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
+#: debhelper.pod:665 dh:896 dh_auto_build:53 dh_auto_clean:56
+#: dh_auto_configure:58 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
+#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:133
#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
-#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82
+#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:84
#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203
#: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65
#: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93
#: dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264
#: dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286
-#: dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123
+#: dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:241 dh_suidregister:123
#: dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr "AUTOR"
# type: textblock
#. type: textblock
-#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58
-#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
-#: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90
+#: debhelper.pod:667 dh:898 dh_auto_build:55 dh_auto_clean:58
+#: dh_auto_configure:60 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
+#: dh_clean:150 dh_compress:214 dh_fixperms:135 dh_gencontrol:90
#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
#: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315
#: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77
#: dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73
#: dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234
#: dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178
-#: dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52
+#: dh_prep:68 dh_shlibdeps:179 dh_strip:243 dh_suidregister:125 dh_testdir:52
#: dh_testroot:35 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr "Joey Hess <joeyh@debian.org>"
"aceptadas se corresponden con los objetivos de un fichero F<debian/rules>: "
"B<build>, B<clean>, B<install>, B<binary-arch>, B<binary-indep> y B<binary>."
-#. type: textblock
+#. type: =head1
#: dh:23
-#, fuzzy
-#| msgid ""
-#| "Commands in the B<binary-indep> sequence are passed the B<-i> option to "
-#| "ensure they only work on binary independent packages, and commands in the "
-#| "B<binary-arch> sequences are passed the B<-a> option to ensure they only "
-#| "work on architecture dependent packages."
-msgid ""
-"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
-"sequences are passed the B<-i> option to ensure they only work on "
-"architecture independent packages, and commands in the B<build-arch>, "
-"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
-"ensure they only work on architecture dependent packages."
+msgid "OVERRIDE TARGETS"
msgstr ""
-"La opción B<-i> se introduce a las órdenes en la secuencia B<binary-indep> "
-"para asegurar que sólo actúan sobre paquetes binarios independientes, y la "
-"opción B<-a> se introduce a órdenes en la secuencia B<binary-arch> para "
-"asegurar que sólo actúan sobre paquetes dependientes de la arquitectura."
#. type: textblock
-#: dh:29
+#: dh:25
msgid ""
-"If F<debian/rules> contains a target with a name like "
-"B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
-"B<dh> will instead call that target. The override target can then run the "
-"command with additional options, or run entirely different commands instead. "
-"See examples below. (Note that to use this feature, you should Build-Depend "
-"on debhelper 7.0.50 or above.)"
+"A F<debian/rules> file using B<dh> can override the command that is run at "
+"any step in a sequence, by defining an override target."
+msgstr ""
+
+#. type: textblock
+#: dh:28
+#, fuzzy
+#| msgid ""
+#| "If F<debian/rules> contains a target with a name like "
+#| "B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
+#| "B<dh> will instead call that target. The override target can then run the "
+#| "command with additional options, or run entirely different commands "
+#| "instead. See examples below. (Note that to use this feature, you should "
+#| "Build-Depend on debhelper 7.0.50 or above.)"
+msgid ""
+"To override I<dh_command>, add a target named B<override_>I<dh_command> to "
+"the rules file. When it would normally run I<dh_command>, B<dh> will instead "
+"call that target. The override target can then run the command with "
+"additional options, or run entirely different commands instead. See examples "
+"below. (Note that to use this feature, you should Build-Depend on debhelper "
+"7.0.50 or above.)"
msgstr ""
"Si F<debian/rules> contiene un objetivo con un nombre del tipo "
"B<override_>I<dh_orden>, B<dh> invocará este objetivo en lugar de ejecutar "
"funcionalidad, el paquete debe tener una dependencia de construcción sobre "
"la versión 7.0.50 o superior de debhelper."
+#. type: textblock
+#: dh:36
+msgid ""
+"Override targets can also be defined to run only when building architecture "
+"dependent or architecture independent packages. Use targets with names like "
+"B<override_>I<dh_command>B<-arch> and B<override_>I<dh_command>B<-indep>. "
+"(Note that to use this feature, you should Build-Depend on debhelper 8.9.7 "
+"or above.)"
+msgstr ""
+
# type: =head1
#. type: =head1
-#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
+#: dh:43 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21
#: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26
#: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56
#: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66
#: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39
-#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40
+#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42
#: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40
#: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31
#: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51
msgstr "OPCIONES"
#. type: =item
-#: dh:39
+#: dh:47
msgid "B<--with> I<addon>[B<,>I<addon> ...]"
msgstr "B<--with> I<extensión>[B<,>I<extensión>,...]"
#. type: textblock
-#: dh:41
+#: dh:49
msgid ""
"Add the debhelper commands specified by the given addon to appropriate "
"places in the sequence of commands that is run. This option can be repeated "
# type: =item
#. type: =item
-#: dh:48
+#: dh:56
msgid "B<--without> I<addon>"
msgstr "B<--without> I<extensión>"
#. type: textblock
-#: dh:50
+#: dh:58
msgid "The inverse of B<--with>, disables using the given addon."
msgstr "Lo contrario de B<--with>, desactiva la extensión dada."
#. type: textblock
-#: dh:54
+#: dh:62
msgid "List all available addons."
msgstr "Lista todas las extensiones disponibles."
#. type: textblock
-#: dh:58
+#: dh:66
msgid ""
"Prints commands that would run for a given sequence, but does not run them."
msgstr ""
"ejecuta."
#. type: textblock
-#: dh:62
+#: dh:70
#, fuzzy
#| msgid ""
#| "All other options passed to B<dh> are passed on to each command it runs. "
# type: =head1
#. type: =head1
-#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:74 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr "EJEMPLOS"
#. type: textblock
-#: dh:68
+#: dh:76
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
"realidad:"
#. type: verbatim
-#: dh:71
+#: dh:79
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
"\n"
#. type: textblock
-#: dh:73
+#: dh:81
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
"predeterminadas de órdenes funcionan sin opciones adicionales."
#. type: verbatim
-#: dh:76 dh:83 dh:97 dh:110
+#: dh:84 dh:105 dh:118
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t\tdh $@\n"
"\n"
-#. type: verbatim
-#: dh:80
-#, no-wrap
+#. type: textblock
+#: dh:88
+#, fuzzy
+#| msgid ""
+#| "Often you'll want to pass an option to a specific debhelper command. The\n"
+#| "easy way to do with is by adding an override target for that command.\n"
+#| "\t\n"
msgid ""
-"Often you'll want to pass an option to a specific debhelper command. The\n"
-"easy way to do with is by adding an override target for that command.\n"
-"\t\n"
+"Often you'll want to pass an option to a specific debhelper command. The "
+"easy way to do with is by adding an override target for that command."
msgstr ""
"A menudo, querrá introducir una opción a una orden de debhelper en\n"
"particular. La forma sencilla de hacerlo es añadir un objetivo «overrride»\n"
"\t\n"
#. type: verbatim
-#: dh:87
+#: dh:91 dh:176 dh:187
#, no-wrap
msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
+"\t\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@\n"
+"\t\n"
+
+#. type: verbatim
+#: dh:95
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\toverride_dh_strip:\n"
+#| "\t\tdh_strip -Xfoo\n"
+#| "\t\t\n"
+msgid ""
"\toverride_dh_strip:\n"
"\t\tdh_strip -Xfoo\n"
-"\t\t\n"
+"\t\n"
msgstr ""
"\toverride_dh_strip:\n"
"\t\tdh_strip -Xfoo\n"
"\t\t\n"
#. type: verbatim
-#: dh:90
-#, no-wrap
+#: dh:98
+#, fuzzy, no-wrap
+#| msgid ""
+#| " dh_auto_configure -- --with-foo --enable-bar\n"
+#| "\n"
msgid ""
-"\toverride_dh_installdocs:\n"
-"\t\tdh_installdocs README TODO\n"
+"\toverride_dh_auto_configure:\n"
+"\t\tdh_auto_configure -- --with-foo --disable-bar\n"
"\n"
msgstr ""
-"\toverride_dh_installdocs:\n"
-"\t\tdh_installdocs README TODO\n"
+" dh_auto_configure -- --with-foo --enable-bar\n"
"\n"
#. type: textblock
-#: dh:93
+#: dh:101
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
"ejecutar sus propias órdenes."
#. type: verbatim
-#: dh:101
+#: dh:109
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
"\n"
#. type: verbatim
-#: dh:104
+#: dh:112
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
"\n"
#. type: textblock
-#: dh:107
+#: dh:115
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
"se ejecute una orden en particular de debhelper."
#. type: verbatim
-#: dh:114
+#: dh:122
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
"\n"
-#. type: textblock
-#: dh:118
-msgid ""
-"Python tools are not run by dh by default, due to the continual change in "
-"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
-"Here is how to use B<dh_python2>."
-msgstr ""
-
-#. type: verbatim
-#: dh:122
-#, fuzzy, no-wrap
-#| msgid ""
-#| "\t#!/usr/bin/make -f\n"
-#| "\t%:\n"
-#| "\t\tdh $@ --with python-central\n"
-#| "\n"
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with python2\n"
-"\n"
-msgstr ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with python-central\n"
-"\n"
-
#. type: textblock
#: dh:126
msgid ""
#. type: textblock
#: dh:135
msgid ""
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
+msgstr ""
+
+#. type: verbatim
+#: dh:139
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\t#!/usr/bin/make -f\n"
+#| "\t%:\n"
+#| "\t\tdh $@ --with python-central\n"
+#| "\n"
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with python2\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with python-central\n"
+"\n"
+
+#. type: textblock
+#: dh:143
+msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
"detecta erróneamente que el paquete usa MakeMaker."
#. type: verbatim
-#: dh:139
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:143
+#: dh:151
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
"en el que las fuentes se ubican en un subdirectorio."
#. type: verbatim
-#: dh:147
+#: dh:155
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:151
+#: dh:159
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
"B<clean>."
#. type: verbatim
-#: dh:154
+#: dh:162
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:158
+#: dh:166
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
"j> funcionará."
#. type: verbatim
-#: dh:161
+#: dh:169
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:165
+#: dh:173
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
"cada orden."
#. type: verbatim
-#: dh:168 dh:179 dh:196
-#, no-wrap
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@\n"
-"\t\n"
-msgstr ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@\n"
-"\t\n"
-
-#. type: verbatim
-#: dh:172
+#: dh:180
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
"\n"
#. type: textblock
-#: dh:175
+#: dh:183
msgid ""
-"Sometimes, you may need to make an override target only run commands when a "
-"particular package is being built. This can be accomplished using "
-"L<dh_listpackages(1)> to test what is being built. For example:"
+"A long build process for a separate documentation package can be separated "
+"out using architecture independent overrides. These will be skipped when "
+"running build-arch and binary-arch sequences."
msgstr ""
-"A veces, puede que desee hacer que un objetivo «override» ejecute las "
-"órdenes sólo cuando se construya un paquete en particular. Para ello, use "
-"L<dh_listpackages(1)> para comprobar qué paquete se está construyendo. Por "
-"ejemplo:"
#. type: verbatim
-#: dh:183
+#: dh:191
#, fuzzy, no-wrap
#| msgid ""
-#| "\toverride_dh_fixperms:\n"
-#| "\t\tdh_fixperms\n"
-#| "\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
-#| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-#| "\tendif\n"
+#| "\toverride_dh_auto_configure:\n"
+#| "\t\t./mondoconfig\n"
#| "\n"
msgid ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-"\tendif\n"
+"\toverride_dh_auto_build-indep:\n"
+"\t\t$(MAKE) -C docs\n"
"\n"
msgstr ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-"\tendif\n"
+"\toverride_dh_auto_configure:\n"
+"\t\t./mondoconfig\n"
"\n"
-#. type: textblock
-#: dh:189
-#, fuzzy
-#| msgid ""
-#| "Finally, remember that you are not limited to using override targets in "
-#| "the rules file when using B<dh>. You can also explicitly define any of "
-#| "the regular rules file targets when it makes sense to do so. A common "
-#| "reason to do this is if your package needs different B<build-arch> and "
-#| "B<build-indep> targets. For example, a package with a long document build "
-#| "process can put it in B<build-indep> to avoid build daemons redundantly "
-#| "building the documentation."
-msgid ""
-"Finally, remember that you are not limited to using override targets in the "
-"rules file when using B<dh>. You can also explicitly define any of the "
-"regular rules file targets when it makes sense to do so. A common reason to "
-"do this is when your package needs different B<build-arch> and B<build-"
-"indep> targets. For example, a package with a long document build process "
-"can put it in B<build-indep>."
-msgstr ""
-"Por último, recuerde que no está limitado al uso de objetivos «override» en "
-"el fichero «rules» cuando use B<dh>. También puede definir de forma "
-"explícita cualquiera de los objetivos normales del fichero «rules» cuando "
-"sea oportuno. Una razón común es si su paquete necesita distintos objetivos "
-"B<build-arch> y B<build-indep>. Por ejemplo, puede insertar un paquete bajo "
-"b<build-indep> si tiene una extensa documentación para evitar que los "
-"demonios de construcción generen la documentación de forma innecesaria."
+#. type: verbatim
+#: dh:194
+#, no-wrap
+msgid ""
+"\t# No tests needed for docs\n"
+"\toverride_dh_auto_test-indep:\n"
+"\n"
+msgstr ""
#. type: verbatim
-#: dh:200
+#: dh:197
#, fuzzy, no-wrap
#| msgid ""
-#| "\tbuild: build-arch build-indep ;\n"
-#| "\tbuild-indep:\n"
-#| "\t\t$(MAKE) docs\n"
-#| "\tbuild-arch:\n"
-#| "\t\t$(MAKE) bins\n"
+#| "\toverride_dh_installdocs:\n"
+#| "\t\tdh_installdocs README TODO\n"
#| "\n"
msgid ""
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_auto_install-indep:\n"
+"\t\t$(MAKE) -C docs install\n"
"\n"
msgstr ""
-"\tbuild: build-arch build-indep ;\n"
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_installdocs:\n"
+"\t\tdh_installdocs README TODO\n"
"\n"
#. type: textblock
-#: dh:205
+#: dh:200
msgid ""
-"Note that in the example above, dh will arrange for \"debian/rules build\" "
-"to call your build-indep and build-arch targets. You do not need to "
-"explicitly define those dependencies in the rules file when using dh with "
-"compatibility level v9. This example would be more complicated with earlier "
-"compatibility levels."
+"Adding to the example above, suppose you need to chmod a file, but only when "
+"building the architecture dependent package, as it's not present when "
+"building only documentation."
msgstr ""
+#. type: verbatim
+#: dh:204
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\toverride_dh_fixperms:\n"
+#| "\t\tdh_fixperms\n"
+#| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#| "\n"
+msgid ""
+"\toverride_dh_fixperms-arch:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+msgstr ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+
#. type: =head1
-#: dh:211
+#: dh:208
msgid "INTERNALS"
msgstr "FUNCIONAMIENTO INTERNO"
#. type: textblock
-#: dh:213
+#: dh:210
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
"puede ver como funciona por dentro."
#. type: textblock
-#: dh:215
+#: dh:212
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
"esas órdenes otra vez."
#. type: textblock
-#: dh:220
+#: dh:217
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
"before>, B<--after> y B<--remaining> pueden anular este comportamiento."
#. type: textblock
-#: dh:225
+#: dh:222
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:228
+#: dh:225
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
"«override». El contenido (e incluso, la existencia) de esta variable de "
"entorno, como el nombre sugiere, está sujeto a cambios en cualquier momento."
+#. type: textblock
+#: dh:230
+#, fuzzy
+#| msgid ""
+#| "Commands in the B<binary-indep> sequence are passed the B<-i> option to "
+#| "ensure they only work on binary independent packages, and commands in the "
+#| "B<binary-arch> sequences are passed the B<-a> option to ensure they only "
+#| "work on architecture dependent packages."
+msgid ""
+"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
+"sequences are passed the B<-i> option to ensure they only work on "
+"architecture independent packages, and commands in the B<build-arch>, "
+"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
+"ensure they only work on architecture dependent packages."
+msgstr ""
+"La opción B<-i> se introduce a las órdenes en la secuencia B<binary-indep> "
+"para asegurar que sólo actúan sobre paquetes binarios independientes, y la "
+"opción B<-a> se introduce a órdenes en la secuencia B<binary-arch> para "
+"asegurar que sólo actúan sobre paquetes dependientes de la arquitectura."
+
#. type: =head1
-#: dh:233
+#: dh:236
msgid "DEPRECATED OPTIONS"
msgstr ""
#. type: textblock
-#: dh:235
+#: dh:238
msgid ""
"The following options are deprecated. It's much better to use override "
"targets instead."
# type: =item
#. type: =item
-#: dh:240
+#: dh:243
msgid "B<--until> I<cmd>"
msgstr "B<--until> I<orden>"
#. type: textblock
-#: dh:242
+#: dh:245
#, fuzzy
#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
msgid "Run commands in the sequence until and including I<cmd>, then stop."
# type: =item
#. type: =item
-#: dh:244
+#: dh:247
msgid "B<--before> I<cmd>"
msgstr "B<--before> I<orden>"
#. type: textblock
-#: dh:246
+#: dh:249
#, fuzzy
#| msgid "Run commands in the sequence before I<cmd>, then stop."
msgid "Run commands in the sequence before I<cmd>, then stop."
# type: =item
#. type: =item
-#: dh:248
+#: dh:251
msgid "B<--after> I<cmd>"
msgstr "B<--after> I<orden>"
#. type: textblock
-#: dh:250
+#: dh:253
#, fuzzy
#| msgid "Run commands in the sequence that come after I<cmd>."
msgid "Run commands in the sequence that come after I<cmd>."
# type: =item
#. type: =item
-#: dh:252
+#: dh:255
msgid "B<--remaining>"
msgstr "B<--remaining>"
#. type: textblock
-#: dh:254
+#: dh:257
#, fuzzy
#| msgid "Run all commands in the sequence that have yet to be run."
msgid "Run all commands in the sequence that have yet to be run."
msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado."
#. type: textblock
-#: dh:258
+#: dh:261
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
# type: textblock
#. type: textblock
-#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh:892 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:54
#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144
-#: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
+#: dh_compress:208 dh_fixperms:129 dh_gconf:101 dh_gencontrol:84
#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
-#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261
+#: dh_installlogcheck:80 dh_installlogrotate:52 dh_installman:261
#: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126
#: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110
#: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260
#: dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282
-#: dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29
+#: dh_strip:237 dh_suidregister:119 dh_testdir:46 dh_testroot:29
#: dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr "L<debhelper(7)>"
# type: textblock
#. type: textblock
-#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh:894 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:56
#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124
-#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103
+#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:131 dh_gconf:103
#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
#: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90
#: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110
#: dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91
#: dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262
#: dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284
-#: dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121
+#: dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:239 dh_suidregister:121
#: dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr "Este programa es parte de debhelper."
#. type: textblock
#: dh_auto_build:37
+#, fuzzy
+#| msgid ""
+#| "Pass I<params> to the program that is run. These can be used to "
+#| "supplement or override any standard parameters that B<dh_auto_build> "
+#| "passes."
msgid ""
-"Pass I<params> to the program that is run. These can be used to supplement "
-"or override any standard parameters that B<dh_auto_build> passes."
+"Pass I<params> to the program that is run, after the parameters that "
+"B<dh_auto_build> usually passes."
msgstr ""
"Introduce los I<parámetros> al programa que ejecuta. Se puede usar para "
"añadir o anular cualquier parámetro estándar que introduce B<dh_auto_build>."
#. type: textblock
#: dh_auto_clean:39
+#, fuzzy
+#| msgid ""
+#| "Pass I<params> to the program that is run. These can be used to "
+#| "supplement or override the any standard parameters that B<dh_auto_clean> "
+#| "passes."
msgid ""
-"Pass I<params> to the program that is run. These can be used to supplement "
-"or override the any standard parameters that B<dh_auto_clean> passes."
+"Pass I<params> to the program that is run, after the parameters that "
+"B<dh_auto_clean> usually passes."
msgstr ""
"Introduce los I<parámetros> al programa que ejecuta. Se puede usar para "
"añadir o anular cualquier parámetro estándar que introduce B<dh_auto_clean>."
#. type: textblock
#: dh_auto_configure:40
+#, fuzzy
+#| msgid ""
+#| "Pass I<params> to the program that is run, after the standard parameters "
+#| "that B<dh_auto_configure> passes. This can be used to supplement or "
+#| "override those parameters. For example:"
msgid ""
-"Pass I<params> to the program that is run, after the standard parameters "
-"that B<dh_auto_configure> passes. This can be used to supplement or override "
-"those parameters. For example:"
+"Pass I<params> to the program that is run, after the parameters that "
+"B<dh_auto_configure> usually passes. For example:"
msgstr ""
"Introduce los I<parámetros> al programa a ejecutar, después de que "
"B<dh_auto_configure> introduzca los parámetros estándar. Se puede usar para "
"añadir o anular esos parámetros. Por ejemplo:"
#. type: verbatim
-#: dh_auto_configure:44
+#: dh_auto_configure:43
#, no-wrap
msgid ""
" dh_auto_configure -- --with-foo --enable-bar\n"
#. type: textblock
#: dh_auto_install:58
+#, fuzzy
+#| msgid ""
+#| "Pass I<params> to the program that is run. These can be used to "
+#| "supplement or override the any standard parameters that "
+#| "B<dh_auto_install> passes."
msgid ""
-"Pass I<params> to the program that is run. These can be used to supplement "
-"or override the any standard parameters that B<dh_auto_install> passes."
+"Pass I<params> to the program that is run, after the parameters that "
+"B<dh_auto_install> usually passes."
msgstr ""
"Introduce los I<parámetros> al programa a ejecutar. Se puede usar para "
"añadir o anular cualquiera de los parámetros estándar que introduce "
#. type: textblock
#: dh_auto_test:40
+#, fuzzy
+#| msgid ""
+#| "Pass I<params> to the program that is run. These can be used to "
+#| "supplement or override the any standard parameters that B<dh_auto_test> "
+#| "passes."
msgid ""
-"Pass I<params> to the program that is run. These can be used to supplement "
-"or override the any standard parameters that B<dh_auto_test> passes."
+"Pass I<params> to the program that is run, after the parameters that "
+"B<dh_auto_test> usually passes."
msgstr ""
"Introduce los I<parámetros> al programa que ejecuta. Se puede usar para "
"añadir o anular cualquier parámetro estándar que introduce B<dh_auto_test>."
# type: =item
#. type: =item
#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104
-#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52
+#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52
#: dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr "B<--name=>I<nombre>"
# type: textblock
#. type: textblock
#: dh_installinit:14
+#, fuzzy
+#| msgid ""
+#| "B<dh_installinit> [S<I<debhelper options>>] [B<--name=>I<name>] [B<-n>] "
+#| "[B<-R>] [B<-r>] [B<-d>] [B<-O>] [S<B<--> I<params>>]"
msgid ""
"B<dh_installinit> [S<I<debhelper options>>] [B<--name=>I<name>] [B<-n>] [B<-"
-"R>] [B<-r>] [B<-d>] [
B<-O>] [S<B<--> I<params>>]"
+"R>] [B<-r>] [B<-d>] [S<B<--> I<params>>]"
msgstr ""
"B<dh_installinit> [S<I<opciones-de-debhelper>>] [B<--name=>I<nombre>] [B<-"
"n>] [B<-R>] [B<-r>] [B<-d>] [B<-O>] [S<B<--> I<parámetros>>]"
# type: textblock
#. type: textblock
-#: dh_installlogcheck:46
+#: dh_installlogcheck:48
#, fuzzy
#| msgid ""
#| "Look for files named F<debian/package.name.logrotate> and install them as "
# type: verbatim
#. type: verbatim
-#: dh_installlogcheck:80
+#: dh_installlogcheck:82
#, no-wrap
msgid ""
"This program is a part of debhelper.\n"
# type: textblock
#. type: textblock
-#: dh_installlogcheck:84
+#: dh_installlogcheck:86
msgid "Jon Middleton <jjm@debian.org>"
msgstr "Jon Middleton <jjm@debian.org>"
# type: textblock
#. type: textblock
#: dh_link:62
+#, fuzzy
+#| msgid ""
+#| "Do not correct symlinks that contain I<item> anywhere in their filename "
+#| "from being corrected to comply with Debian policy."
msgid ""
-"Do not correct symlinks that contain I<item> anywhere in their filename from "
-"being corrected to comply with Debian policy."
+"Exclude symlinks that contain I<item> anywhere in their filename from being "
+"corrected to comply with Debian policy."
msgstr ""
"No corrige enlaces simbólicos, para que cumplan con las normas de Debian, "
"que contienen I<elemento> en cualquier parte de su nombre de ficheros."
msgstr "Andrew Stribblehill <ads@debian.org>"
#~ msgid ""
-#~ "To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+#~ "\toverride_dh_installdocs:\n"
+#~ "\t\tdh_installdocs README TODO\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\toverride_dh_installdocs:\n"
+#~ "\t\tdh_installdocs README TODO\n"
+#~ "\n"
+
+# type: textblock
+#~ msgid ""
+#~ "This is useful in some situations, for example, if you need to pass B<-p> "
+#~ "to all debhelper commands that will be run. One good way to set "
+#~ "B<DH_OPTIONS> is by using \"Target-specific Variable Values\" in your "
+#~ "F<debian/rules> file. See the make documentation for details on doing "
+#~ "this."
+#~ msgstr ""
+#~ "Esto es útil en algunas situaciones, por ejemplo, si necesita introducir "
+#~ "la opción B<-p> a todas las órdenes de debhelper que va a utilizar. Una "
+#~ "buena manera de dar un valor a B<DH_OPTIONS> es usando «Target-specific "
+#~ "Variable Valores» en su fichero F<debian/rules>. Consulte la "
+#~ "documentación de make para los detalles sobre cómo hacer esto."
+
+#~ msgid ""
+#~ "Sometimes, you may need to make an override target only run commands when "
+#~ "a particular package is being built. This can be accomplished using "
+#~ "L<dh_listpackages(1)> to test what is being built. For example:"
+#~ msgstr ""
+#~ "A veces, puede que desee hacer que un objetivo «override» ejecute las "
+#~ "órdenes sólo cuando se construya un paquete en particular. Para ello, use "
+#~ "L<dh_listpackages(1)> para comprobar qué paquete se está construyendo. "
+#~ "Por ejemplo:"
+
+#, fuzzy
+#~| msgid ""
+#~| "\toverride_dh_fixperms:\n"
+#~| "\t\tdh_fixperms\n"
+#~| "\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
+#~| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~| "\tendif\n"
+#~| "\n"
+#~ msgid ""
+#~ "\toverride_dh_fixperms:\n"
+#~ "\t\tdh_fixperms\n"
+#~ "\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
+#~ "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~ "\tendif\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\toverride_dh_fixperms:\n"
+#~ "\t\tdh_fixperms\n"
+#~ "\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
+#~ "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~ "\tendif\n"
+#~ "\n"
+
+#, fuzzy
+#~| msgid ""
+#~| "Finally, remember that you are not limited to using override targets in "
+#~| "the rules file when using B<dh>. You can also explicitly define any of "
+#~| "the regular rules file targets when it makes sense to do so. A common "
+#~| "reason to do this is if your package needs different B<build-arch> and "
+#~| "B<build-indep> targets. For example, a package with a long document "
+#~| "build process can put it in B<build-indep> to avoid build daemons "
+#~| "redundantly building the documentation."
+#~ msgid ""
+#~ "Finally, remember that you are not limited to using override targets in "
+#~ "the rules file when using B<dh>. You can also explicitly define any of "
+#~ "the regular rules file targets when it makes sense to do so. A common "
+#~ "reason to do this is when your package needs different B<build-arch> and "
+#~ "B<build-indep> targets. For example, a package with a long document "
+#~ "build process can put it in B<build-indep>."
+#~ msgstr ""
+#~ "Por último, recuerde que no está limitado al uso de objetivos «override» "
+#~ "en el fichero «rules» cuando use B<dh>. También puede definir de forma "
+#~ "explícita cualquiera de los objetivos normales del fichero «rules» cuando "
+#~ "sea oportuno. Una razón común es si su paquete necesita distintos "
+#~ "objetivos B<build-arch> y B<build-indep>. Por ejemplo, puede insertar un "
+#~ "paquete bajo b<build-indep> si tiene una extensa documentación para "
+#~ "evitar que los demonios de construcción generen la documentación de forma "
+#~ "innecesaria."
+
+#, fuzzy
+#~| msgid ""
+#~| "\tbuild: build-arch build-indep ;\n"
+#~| "\tbuild-indep:\n"
+#~| "\t\t$(MAKE) docs\n"
+#~| "\tbuild-arch:\n"
+#~| "\t\t$(MAKE) bins\n"
+#~| "\n"
+#~ msgid ""
+#~ "\tbuild-indep:\n"
+#~ "\t\t$(MAKE) docs\n"
+#~ "\tbuild-arch:\n"
+#~ "\t\t$(MAKE) bins\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\tbuild: build-arch build-indep ;\n"
+#~ "\tbuild-indep:\n"
+#~ "\t\t$(MAKE) docs\n"
+#~ "\tbuild-arch:\n"
+#~ "\t\t$(MAKE) bins\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "To patch your package using quilt, you can tell B<dh> to use quilt's "
+#~ "B<dh>\n"
#~ "sequence addons like this:\n"
#~ "\t\n"
#~ msgstr ""
projects / debhelper.git / blobdiff