=head1 SYNOPSIS
-B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] [B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] [S<I<debhelper options>>]
+B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] [S<I<debhelper options>>]
=head1 DESCRIPTION
B<build-indep>, B<build>, B<clean>, B<install-indep>, B<install-arch>,
B<install>, B<binary-arch>, B<binary-indep>, and B<binary>.
-Commands in the B<build-indep>, B<install-indep> and B<binary-indep>
-sequences are passed the B<-i> option to ensure they only work on
-architecture independent packages, and commands in the B<build-arch>,
-B<install-arch> and B<binary-arch> sequences are passed the B<-a>
-option to ensure they only work on architecture dependent packages.
+=head1 OVERRIDE TARGETS
-If F<debian/rules> contains a target with a name like B<override_>I<dh_command>,
-then when it would normally run I<dh_command>, B<dh> will instead call that
-target. The override target can then run the command with additional options,
-or run entirely different commands instead. See examples below. (Note that to
-use this feature, you should Build-Depend on debhelper 7.0.50 or above.)
+A F<debian/rules> file using B<dh> can override the command that is run
+at any step in a sequence, by defining an override target.
+
+To override I<dh_command>, add a target named B<override_>I<dh_command> to
+the rules file. When it would normally run I<dh_command>, B<dh> will
+instead call that target. The override target can then run the command with
+additional options, or run entirely different commands instead. See
+examples below.
+(Note that to use this feature, you should Build-Depend on
+debhelper 7.0.50 or above.)
+
+Override targets can also be defined to run only when building
+architecture dependent or architecture independent packages.
+Use targets with names like B<override_>I<dh_command>B<-arch>
+and B<override_>I<dh_command>B<-indep>.
+(Note that to use this feature, you should Build-Depend on
+debhelper 8.9.7 or above.)
=head1 OPTIONS
List all available addons.
-=item B<--until> I<cmd>
-
-Run commands in the sequence until and including I<cmd>, then stop.
-
-=item B<--before> I<cmd>
-
-Run commands in the sequence before I<cmd>, then stop.
-
-=item B<--after> I<cmd>
-
-Run commands in the sequence that come after I<cmd>.
-
-=item B<--remaining>
-
-Run all commands in the sequence that have yet to be run.
-
=item B<--no-act>
Prints commands that would run for a given sequence, but does not run them.
=back
-All other options passed to B<dh> are passed on to each command it runs. This
+Other options passed to B<dh> are passed on to each command it runs. This
can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for more
specialised options.
-In the above options, I<cmd> can be a full name of a debhelper command, or
-a substring. It'll first search for a command in the sequence exactly
-matching the name, to avoid any ambiguity. If there are multiple substring
-matches, the last one in the sequence will be used.
-
-=cut
-
-sub command_pos {
- my $command=shift;
- my @sequence=@_;
-
- foreach my $i (0..$#sequence) {
- if ($command eq $sequence[$i]) {
- return $i;
- }
- }
-
- my @matches;
- foreach my $i (0..$#sequence) {
- if ($sequence[$i] =~ /\Q$command\E/) {
- push @matches, $i;
- }
- }
- if (! @matches) {
- error "command specification \"$command\" does not match any command in the sequence"
- }
- else {
- return pop @matches;
- }
-}
-
=head1 EXAMPLES
To see what commands are included in a sequence, without actually doing
Often you'll want to pass an option to a specific debhelper command. The
easy way to do with is by adding an override target for that command.
-
+
#!/usr/bin/make -f
%:
dh $@
-
+
override_dh_strip:
dh_strip -Xfoo
-
- override_dh_installdocs:
- dh_installdocs README TODO
+
+ override_dh_auto_configure:
+ dh_auto_configure -- --with-foo --disable-bar
Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)>
can't guess what to do for a strange package. Here's how to avoid running
override_dh_auto_build:
make universe-explode-in-delight
-If running a configure script, it may be necessary to prevent it being
-run twice, once for architecture-independent packages, and again for
-architecture-dependent packages. This may be accomplished by
-overriding L<dh_autoconfigure(1)>:
-
- override_dh_auto_configure: config.status
-
- config.status:
- dh_auto_configure -- $configure_options
-
Another common case is wanting to do something manually before or
after a particular debhelper command is run.
dh_fixperms
chmod 4755 debian/foo/usr/bin/foo
-If your package is a Python package, B<dh> will use B<dh_pysupport> by
-default. This is how to use B<dh_pycentral> instead.
-
- #!/usr/bin/make -f
- %:
- dh $@ --with python-central
-
If your package uses autotools and you want to freshen F<config.sub> and
F<config.guess> with newer versions from the B<autotools-dev> package
at build time, you can use some commands provided in B<autotools-dev>
%:
dh $@ --with autotools_dev
+Python tools are not run by dh by default, due to the continual change
+in that area. (Before compatibility level v9, dh does run B<dh_pysupport>.)
+Here is how to use B<dh_python2>.
+
+ #!/usr/bin/make -f
+ %:
+ dh $@ --with python2
+
Here is how to force use of Perl's B<Module::Build> build system,
which can be necessary if debhelper wrongly detects that the package
uses MakeMaker.
%:
dh $@ --buildsystem=perl_build
-To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>
-sequence addons like this:
-
- #!/usr/bin/make -f
- %:
- dh $@ --with quilt
-
Here is an example of overriding where the B<dh_auto_>I<*> commands find
the package's source, for a package where the source is located in a
subdirectory.
# Commands not to run:
override_dh_auto_test override_dh_compress override_dh_fixperms:
-Sometimes, you may need to make an override target only run commands when a
-particular package is being built. This can be accomplished using
-L<dh_listpackages(1)> to test what is being built. For example:
+A long build process for a separate documentation package can
+be separated out using architecture independent overrides.
+These will be skipped when running build-arch and binary-arch sequences.
#!/usr/bin/make -f
%:
dh $@
- override_dh_fixperms:
- dh_fixperms
- ifneq (,$(filter foo, $(shell dh_listpackages)))
- chmod 4755 debian/foo/usr/bin/foo
- endif
+ override_dh_auto_build-indep:
+ $(MAKE) -C docs
-Finally, remember that you are not limited to using override targets in the
-rules file when using B<dh>. You can also explicitly define the regular
-rules file targets when it makes sense to do so. A common reason to do this
-is if your package needs different B<build-arch> and B<build-indep> targets.
-For example, a package with a long document build process can put it in
-B<build-indep>.
+ # No tests needed for docs
+ override_dh_auto_test-indep:
- #!/usr/bin/make -f
- %:
- dh $@
-
- binary: binary-arch binary-indep ;
- binary-arch:: build-arch
- binary-indep:: build-indep
- build: build-arch build-indep ;
- build-indep:
- $(MAKE) docs
- build-arch:
- $(MAKE) bins
+ override_dh_auto_install-indep:
+ $(MAKE) -C docs install
+
+Adding to the example above, suppose you need to chmod a file, but only
+when building the architecture dependent package, as it's not present
+when building only documentation.
+
+ override_dh_fixperms-arch:
+ dh_fixperms
+ chmod 4755 debian/foo/usr/bin/foo
=head1 INTERNALS
options can override this behavior.
A sequence can also run dependent targets in debian/rules. For
-example, the "binary" sequence runs the "install" target. This will
-show up in the dh output as "debian/rules install", but internally
-will be called "rules:install" in the sequence. The "install"
-sequence likewise runs "debian/rules build", internally named
-"rules:build".
+example, the "binary" sequence runs the "install" target.
B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass information
through to debhelper commands that are run inside override targets. The
contents (and indeed, existence) of this environment variable, as the name
might suggest, is subject to change at any time.
+Commands in the B<build-indep>, B<install-indep> and B<binary-indep>
+sequences are passed the B<-i> option to ensure they only work on
+architecture independent packages, and commands in the B<build-arch>,
+B<install-arch> and B<binary-arch> sequences are passed the B<-a>
+option to ensure they only work on architecture dependent packages.
+
+=head1 DEPRECATED OPTIONS
+
+The following options are deprecated. It's much
+better to use override targets instead.
+
+=over 4
+
+=item B<--until> I<cmd>
+
+Run commands in the sequence until and including I<cmd>, then stop.
+
+=item B<--before> I<cmd>
+
+Run commands in the sequence before I<cmd>, then stop.
+
+=item B<--after> I<cmd>
+
+Run commands in the sequence that come after I<cmd>.
+
+=item B<--remaining>
+
+Run all commands in the sequence that have yet to be run.
+
+=back
+
+In the above options, I<cmd> can be a full name of a debhelper command, or
+a substring. It'll first search for a command in the sequence exactly
+matching the name, to avoid any ambiguity. If there are multiple substring
+matches, the last one in the sequence will be used.
+
=cut
# Stash this away before init modifies it.
my @ARGV_orig=@ARGV;
-# python-support is enabled by default, at least for now
-# (and comes first so python-central loads later and can disable it).
-unshift @ARGV, "--with=python-support";
+if (compat(8, 1)) {
+ # python-support was enabled by default before v9.
+ # (and comes first so python-central loads later and can disable it).
+ unshift @ARGV, "--with=python-support";
+}
init(options => {
"until=s" => \$dh{UNTIL},
bundling => 0,
);
inhibit_log();
-
+set_buildflags();
+warn_deprecated();
# If make is using a jobserver, but it is not available
# to this process, clean out MAKEFLAGS. This avoids
clean_jobserver_makeflags();
}
+# Process the sequence parameter.
+my $sequence;
+if (! compat(7)) {
+ # From v8, the sequence is the very first parameter.
+ $sequence=shift @ARGV_orig;
+ if (defined $sequence && $sequence=~/^-/) {
+ error "Unknown sequence $sequence (options should not come before the sequence)";
+ }
+}
+else {
+ # Before v8, the sequence could be at any position in the parameters,
+ # so was what was left after parsing.
+ $sequence=shift;
+ if (defined $sequence) {
+ @ARGV_orig=grep { $_ ne $sequence } @ARGV_orig;
+ }
+}
+if (! defined $sequence) {
+ error "specify a sequence to run";
+}
+# make -B causes the rules file to be run as a target.
+# Also support completly empty override targets.
+# Note: it's not safe to use rules_explicit_target before this check,
+# since it causes dh to be run.
+my $dummy_target="debhelper-fail-me";
+if ($sequence eq 'debian/rules' ||
+ $sequence =~ /^override_dh_/ ||
+ $sequence eq $dummy_target) {
+ exit 0;
+}
+
+
# Definitions of sequences.
my %sequences;
my @bd_minimal = qw{
dh_auto_configure
dh_auto_build
dh_auto_test
- };
-# rules:build-arch and rules:build-indep are not called by build,
-# as an optimisation (code below will adjust this if explicit targets exist).
-$sequences{build} = [@bd];
-$sequences{'build-indep'} = [@bd];
-$sequences{'build-arch'} = [@bd];
-$sequences{clean} = [qw{
- dh_testdir
- dh_auto_clean
- dh_clean
-}];
-my @i_minimal = qw{
- dh_testroot
};
my @i = qw{
dh_testroot
dh_compress
dh_fixperms
};
-# The install sequences will call rules:build before running
-# the standard sequence. rules:install-arch and rules:install-indep
-# are not called by install, as an optimisation (code below will adjust
-# this if explicit targets exist).
-$sequences{'install'} = ['rules:build', @i, 'rules:install-arch', 'rules:install-indep'];
-$sequences{'install-indep'} = ['rules:build-indep', @i];
-$sequences{'install-arch'} = ['rules:build-arch', @i];
my @ba=qw{
dh_strip
dh_makeshlibs
dh_shlibdeps
};
+if (! getpackages("arch")) {
+ @ba=();
+}
my @b=qw{
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
};
-# The binary sequences will call 'debian/rules install' before running
-# the standard sequence.
-$sequences{binary} = ['rules:install', 'rules:binary-arch', 'rules:binary-indep'];
-$sequences{'binary-indep'} = ['rules:install-indep', @b];
-$sequences{'binary-arch'} = ['rules:install-arch', @ba, @b];
+$sequences{clean} = [qw{
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+}];
+$sequences{'build-indep'} = [@bd];
+$sequences{'build-arch'} = [@bd];
+if (! compat(8)) {
+ # From v9, sequences take standard rules targets into account.
+ $sequences{build} = [@bd_minimal, rules("build-arch"), rules("build-indep")];
+ $sequences{'install-indep'} = [rules("build-indep"), @i];
+ $sequences{'install-arch'} = [rules("build-arch"), @i];
+ $sequences{'install'} = [rules("build"), rules("install-arch"), rules("install-indep")];
+ $sequences{'binary-indep'} = [rules("install-indep"), @b];
+ $sequences{'binary-arch'} = [rules("install-arch"), @ba, @b];
+ $sequences{binary} = [rules("install"), rules("binary-arch"), rules("binary-indep")];
+}
+else {
+ $sequences{build} = [@bd];
+ $sequences{'install'} = [@{$sequences{build}}, @i];
+ $sequences{'install-indep'} = [@{$sequences{'build-indep'}}, @i];
+ $sequences{'install-arch'} = [@{$sequences{'build-arch'}}, @i];
+ $sequences{binary} = [@{$sequences{install}}, @ba, @b];
+ $sequences{'binary-indep'} = [@{$sequences{'install-indep'}}, @b];
+ $sequences{'binary-arch'} = [@{$sequences{'install-arch'}}, @ba, @b];
+}
# Additional command options
my %command_opts;
exit 0;
}
+# Load addons, which can modify sequences.
foreach my $addon (@{$dh{WITH}}) {
my $mod="Debian::Debhelper::Sequence::$addon";
$mod=~s/-/_/g;
}
}
-my $sequence;
-if (! compat(7)) {
- # From v8, the sequence is the very first parameter.
- $sequence=shift @ARGV_orig;
- if ($sequence=~/^-/) {
- error "Unknown sequence $sequence (options should not come before the sequence)";
- }
-}
-else {
- # Before v8, the sequence could be at any position in the parameters,
- # so was what was left after parsing.
- $sequence=shift;
- if (defined $sequence) {
- @ARGV_orig=grep { $_ ne $sequence } @ARGV_orig;
- }
-}
-if (! defined $sequence) {
- error "specify a sequence to run";
-}
-# make -B causes the rules file to be run as a target.
-# Also support completly empty override targets.
-# Note: it's not safe to use rules_explicit_target before this check.
-if ($sequence eq 'debian/rules' ||
- $sequence =~ /^override_dh_/) {
- exit 0;
-}
-elsif (! exists $sequences{$sequence}) {
+if (! exists $sequences{$sequence}) {
error "Unknown sequence $sequence (choose from: ".
join(" ", sort keys %sequences).")";
}
-
-# If debian/rules defines build-arch or build-indep, run sequences separately.
-if (rules_explicit_target('build-arch') ||
- rules_explicit_target('build-indep')) {
- $sequences{build} = [@bd_minimal, 'rules:build-arch', 'rules:build-indep'];
-}
-# If debian/rules defines install-arch or install-indep, run sequences
-# separately.
-if (rules_explicit_target('install-arch') ||
- rules_explicit_target('install-indep')) {
- $sequences{'install'} = ['rules:build', @i_minimal, 'rules:install-arch', 'rules:install-indep'];
-}
-
-my @sequence=@{$sequences{$sequence}};
+my @sequence=optimize_sequence(@{$sequences{$sequence}});
# The list of all packages that can be acted on.
my @packages=@{$dh{DOPACKAGES}};
# Now run the commands in the sequence.
foreach my $i (0..$stoppoint) {
+ my $command=$sequence[$i];
+
# Figure out which packages need to run this command.
- my @exclude;
+ my @todo;
+ my @opts=@options;
foreach my $package (@packages) {
if ($startpoint{$package} > $i ||
$logged{$package}{$sequence[$i]}) {
- push @exclude, $package;
+ push @opts, "-N$package";
+ }
+ else {
+ push @todo, $package;
}
}
-
- if (@exclude eq @packages) {
- # Command already done for all packages.
+ next unless @todo;
+
+ my $rules_target = rules_target($command);
+ if (defined $rules_target) {
+ # Don't pass DH_ environment variables, since this is
+ # a fresh invocation of debian/rules and any sub-dh commands.
+ delete $ENV{DH_INTERNAL_OPTIONS};
+ delete $ENV{DH_INTERNAL_OVERRIDE};
+ run("debian/rules", $rules_target);
next;
}
+
+ # Check for override targets in debian/rules, and run instead of
+ # the usual command. (The non-arch-specific override is tried first,
+ # for simplest semantics; mixing it with arch-specific overrides
+ # makes little sense.)
+ foreach my $override_type (undef, "arch", "indep") {
+ @todo = run_override($override_type, $command, \@todo, @opts);
+ }
+ next unless @todo;
- run($sequence[$i], \@packages, \@exclude, @options);
+ run($command, @opts);
}
sub run {
my $command=shift;
- my @packages=@{shift()};
- my @exclude=@{shift()};
my @options=@_;
-
- # If some packages are excluded, add flags
- # to prevent them from being acted on.
- push @options, map { "-N$_" } @exclude;
- # If the command has a rules: prefix, run debian/rules with
- # the remainder as the target.
- my $rules_target = undef;
- if ($command =~ /^rules:(.*)/) {
- $rules_target = $1;
+ # Include additional command options if any
+ unshift @options, @{$command_opts{$command}}
+ if exists $command_opts{$command};
+
+ # 3 space indent lines the command being run up under the
+ # sequence name after "dh ".
+ print " ".escape_shell($command, @options)."\n";
+
+ return if $dh{NO_ACT};
+
+ my $ret=system($command, @options);
+ if ($ret >> 8 != 0) {
+ exit $ret >> 8;
}
+ elsif ($ret) {
+ exit 1;
+ }
+}
- # Check for override targets in debian/rules and
- # run them instead of running the command directly.
- my $override_command;
- my $has_explicit_target = rules_explicit_target("override_".$command);
+# Tries to run an override target for a command. Returns the list of
+# packages that it was unable to run an override target for.
+sub run_override {
+ my $override_type=shift; # arch, indep, or undef
+ my $command=shift;
+ my @packages=@{shift()};
+ my @options=@_;
- if (defined $rules_target) {
- # Don't pass DH_ environment variables, since this is
- # a fresh invocation of debian/rules and any sub-dh
- # commands.
- $override_command=$command;
- delete $ENV{DH_INTERNAL_OPTIONS};
- delete $ENV{DH_INTERNAL_OVERRIDE};
- $command="debian/rules";
- @options=$rules_target;
- }
- elsif (defined $has_explicit_target) {
- $override_command=$command;
- # Check if target isn't noop
- if ($has_explicit_target) {
- # This passes the options through to commands called
- # inside the target.
- $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
- $ENV{DH_INTERNAL_OVERRIDE}=$command;
- $command="debian/rules";
- @options="override_".$override_command;
- }
- else {
- $command = undef;
+ my $override="override_$command".
+ (defined $override_type ? "-".$override_type : "");
+
+ # Check which packages are of the right architecture for the
+ # override_type.
+ my (@todo, @rest);
+ if (defined $override_type) {
+ foreach my $package (@packages) {
+ my $isall=package_arch($package) eq 'all';
+ if (($override_type eq 'indep' && $isall) ||
+ ($override_type eq 'arch' && !$isall)) {
+ push @todo, $package;
+ }
+ else {
+ push @rest, $package;
+ push @options, "-N$package";
+ }
}
}
else {
- # Pass additional command options if any
- unshift @options, @{$command_opts{$command}} if exists $command_opts{$command};
+ @todo=@packages;
}
- if (defined $command) {
- # 3 space indent lines the command being run up under the
- # sequence name after "dh ".
- print " ".escape_shell($command, @options)."\n";
+ my $has_explicit_target = rules_explicit_target($override);
+ return @packages unless defined $has_explicit_target; # no such override
+ return @rest if ! $has_explicit_target; # has empty override
+ return @rest unless @todo; # has override, but no packages to act on
+
+ if (defined $override_type) {
+ # Ensure appropriate -a or -i option is passed when running
+ # an arch-specific override target.
+ my $opt=$override_type eq "arch" ? "-a" : "-i";
+ push @options, $opt unless grep { $_ eq $opt } @options;
}
- else {
- print " ", "# Skipping ", $override_command, " - empty override", "\n";
+
+ # This passes the options through to commands called
+ # inside the target.
+ $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
+ $ENV{DH_INTERNAL_OVERRIDE}=$command;
+ run("debian/rules", $override);
+ delete $ENV{DH_INTERNAL_OPTIONS};
+ delete $ENV{DH_INTERNAL_OVERRIDE};
+
+ # Update log for overridden command now that it has
+ # finished successfully.
+ # (But avoid logging for dh_clean since it removes
+ # the log earlier.)
+ if (! $dh{NO_ACT} && $command ne 'dh_clean') {
+ write_log($command, @todo);
+ commit_override_log(@todo);
}
-
- if (! $dh{NO_ACT}) {
- if (defined $command) {
- my $ret=system($command, @options);
-
- if ($ret >> 8 != 0) {
- exit $ret >> 8;
- }
- elsif ($ret) {
- exit 1;
- }
- }
- if (defined $override_command) {
- # Update log for overridden command now that it has
- # finished successfully.
- # (But avoid logging for dh_clean since it removes
- # the log earlier.)
- if ($override_command ne 'dh_clean') {
- my %packages=map { $_ => 1 } @packages;
- map { delete $packages{$_} } @exclude;
- write_log($override_command, keys %packages);
- commit_override_log(keys %packages);
- }
+ return @rest;
+}
- delete $ENV{DH_INTERNAL_OPTIONS};
- delete $ENV{DH_INTERNAL_OVERRIDE};
+sub optimize_sequence {
+ my @sequence;
+ my %seen;
+ my $add=sub {
+ # commands can appear multiple times when sequences are
+ # inlined together; only the first should be needed
+ my $command=shift;
+ if (! $seen{$command}) {
+ $seen{$command}=1;
+ push @sequence, $command;
+ }
+ };
+ foreach my $command (@_) {
+ my $rules_target=rules_target($command);
+ if (defined $rules_target &&
+ ! defined rules_explicit_target($rules_target)) {
+ # inline the sequence for this implicit target
+ $add->($_) foreach optimize_sequence(@{$sequences{$rules_target}});
}
+ else {
+ $add->($command);
+ }
+ }
+ return @sequence;
+}
+
+sub rules_target {
+ my $command=shift;
+ if ($command =~ /^debian\/rules\s+(.*)/) {
+ return $1
+ }
+ else {
+ return undef;
}
}
+sub rules {
+ return "debian/rules ".join(" ", @_);
+}
+
{
my %targets;
my $rules_parsed;
my $processing_targets = 0;
my $not_a_target = 0;
my $current_target;
- open(MAKE, "LC_ALL=C make -Rrnpsf debian/rules debhelper-fail-me 2>/dev/null |");
+ open(MAKE, "LC_ALL=C make -Rrnpsf debian/rules $dummy_target 2>/dev/null |");
while (<MAKE>) {
if ($processing_targets) {
if (/^# Not a target:/) {
if (defined $current_target) {
if (/^#/) {
# Check if target has commands to execute
- if (/^#\s*commands to execute/) {
+ if (/^#\s*(commands|recipe) to execute/) {
$targets{$current_target} = 1;
}
}
}
+sub warn_deprecated {
+ foreach my $deprecated ('until', 'after', 'before', 'remaining') {
+ if (defined $dh{uc $deprecated}) {
+ warning("The --$deprecated option is deprecated. Use override targets instead.");
+ }
+ }
+}
+
+sub command_pos {
+ my $command=shift;
+ my @sequence=@_;
+
+ foreach my $i (0..$#sequence) {
+ if ($command eq $sequence[$i]) {
+ return $i;
+ }
+ }
+
+ my @matches;
+ foreach my $i (0..$#sequence) {
+ if ($sequence[$i] =~ /\Q$command\E/) {
+ push @matches, $i;
+ }
+ }
+ if (! @matches) {
+ error "command specification \"$command\" does not match any command in the sequence"
+ }
+ else {
+ return pop @matches;
+ }
+}
+
=head1 SEE ALSO
L<debhelper(7)>
projects / debhelper.git / blobdiff