+debhelper (8.9.11) unstable; urgency=low
+
+ * Fix broken option passing to objcopy. Closes: #649044
+
+ -- Joey Hess <joeyh@debian.org> Thu, 17 Nov 2011 00:15:34 -0400
+
+debhelper (8.9.10) unstable; urgency=low
+
+ * dh_strip: In v9, pass --compress-debug-sections to objcopy.
+ Needs a new enough binutils and gdb; debhelper backport
+ may need to disable this.
+ Thanks, Aurelien Jarno and Bastien ROUCARIES. Closes: #631985
+ * dh: Ensure -a and -i are passed when running override_dh_command-arch
+ and override_dh_command-indep targets. This is needed when the binary
+ target is run, rather than binary-arch/binary-indep. Closes: #648901
+
+ -- Joey Hess <joeyh@debian.org> Wed, 16 Nov 2011 11:54:59 -0400
+
+debhelper (8.9.9) unstable; urgency=low
+
+ * dh_auto_build: Use target architecture (not host architecture)
+ for build directory name. Closes: #644553 Thanks, Tom Hughes
+ * dh: Add dh_auto_configure parameter example. Closes: #645335
+
+ -- Joey Hess <joeyh@debian.org> Fri, 04 Nov 2011 17:01:58 -0400
+
+debhelper (8.9.8) unstable; urgency=low
+
+ * dh_fixperms: Operate on .ali files throughout /usr/lib, including
+ multiarch dirs. Closes: #641279
+ * dh: Avoid compat deprecation warning before option parsing.
+ Closes: #641361
+ * Clarify description of dh_auto_* -- params. Closes: #642786
+ * Mention in debhelper(7) that buildsystem options are typically passed
+ to dh. Closes: #643069
+ * perl_makemaker: In v9, pass CFLAGS to Makefile.PL and Build.Pl
+ Closes: #643702, #497653 Thanks, Steve Langasek, gregor herrmann.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 29 Sep 2011 15:41:16 -0400
+
+debhelper (8.9.7) unstable; urgency=low
+
+ * dh: Now you can use override_dh_command-arch and override_dh_command-indep
+ to run different overrides when building arch and indep packages. This
+ allows for a much simplified form of rules file in this situation, where
+ build-arch/indep and binary-arch/indep targets do not need to be manually
+ specified. See man page for examples. Closes: #640965
+ .
+ Note that if a rules file has say, override_dh_fixperms-arch,
+ but no corresponding override_dh_fixperms-indep, then the unoverridden
+ dh_fixperms will be run on the indep packages.
+ .
+ Note that the old override_dh_command takes precidence over the new
+ overrides, because mixing the two types of overrides would have been
+ too complicated. In particular, it's difficult to ensure an
+ old override target will work if it's sometimes constrained to only
+ acting on half the packages it would normally run on. This would be
+ a source of subtle bugs, so is avoided.
+ * dh: Don't bother running dh_shlibdebs, dh_makeshlibs, or dh_strip
+ in the binary target when all packages being acted on are indep.
+ * dh: Avoid running install sequence a third time in v9 when the
+ rules file has explicit binary-indep and binary-arch targets.
+ Closes: #639341 Thanks, Yann Dirson for test case.
+ * debhelper no longer build-depends on man-db or file, to ease bootstrapping.
+ * Remove obsolete versioned dependency on perl-base.
+ * Avoid writing debhelper log files in no-act mode. Closes: #640586
+ * Tighten parsing of DEB_BUILD_OPTIONS.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 11 Sep 2011 20:29:22 -0400
+
+debhelper (8.9.6) unstable; urgency=low
+
+ * dh_installlogcheck: Add support for --name. Closes: #639020
+ Thanks, Gergely Nagy
+
+ -- Joey Hess <joeyh@debian.org> Tue, 23 Aug 2011 15:25:55 -0400
+
+debhelper (8.9.5) unstable; urgency=low
+
+ * dh_compress: Don't compress _sources documentation subdirectory
+ as used by python-sphinx. Closes: #637492
+ Thanks, Jakub Wilk
+ * dh_ucf: fix test for ucf/ucfr availability and quote filenames.
+ Closes: #638944
+ Thanks, Jeroen Schot
+
+ -- Joey Hess <joeyh@debian.org> Tue, 23 Aug 2011 13:25:54 -0400
+
+debhelper (8.9.4) unstable; urgency=low
+
+ * dh: The --before --after --until and --remaining options are deprecated.
+ Use override targets instead.
+ * Assume that the package can be cleaned (i.e. the build directory can be
+ removed) as long as it is built out-of-source tree and can be configured.
+ This is useful for derivative buildsystems which generate Makefiles.
+ (Modestas Vainius) Closes: #601590
+ * dh_auto_test: Run cmake tests in parallel when allowed by
+ DEB_BUILD_OPTIONS. (Modestas Vainius) Closes: #587885
+ * dpkg-buildflags is only used to set environment in v9, to avoid
+ re-breaking packages that were already broken a first time by
+ dpkg-buildpackage unconditionally setting the environment, and
+ worked around that by unsetting variables in the rules file.
+ (Example: numpy)
+
+ -- Joey Hess <joeyh@debian.org> Sat, 06 Aug 2011 18:58:59 -0400
+
+debhelper (8.9.3) unstable; urgency=low
+
+ * dh: Remove obsolete optimisation hack that caused sequence breakage
+ in v9 with a rules file with an explict build target. Closes: #634784
+
+ -- Joey Hess <joeyh@debian.org> Tue, 19 Jul 2011 23:26:43 -0400
+
+debhelper (8.9.2) unstable; urgency=low
+
+ * dh: Support make 3.82. Closes: #634385
+
+ -- Joey Hess <joeyh@debian.org> Mon, 18 Jul 2011 17:55:24 -0400
+
+debhelper (8.9.1) unstable; urgency=low
+
+ * Typo fixes. Closes: #632662
+ * dh: In v9, do not enable any python support commands. Closes: #634106
+ * Now the QT4 version of qmake can be explicitly selected by passing
+ --buildsystem=qmake_qt4. Closes: #566840
+ * Remove debhelper.log in compat level 1. Closes: #634155
+ * dh_builddeb: Build in parallel when allowed by DEB_BUILD_OPTIONS.
+ Closes: #589427 (Thanks, Gergely Nagy and Kari Pahula)
+
+ -- Joey Hess <joeyh@debian.org> Sun, 17 Jul 2011 16:31:27 -0400
+
+debhelper (8.9.0) unstable; urgency=low
+
+ * dh: In v9, any standard rules file targets, including build-arch,
+ build-indep, build, install, etc, can be defined in debian/rules
+ without needing to explicitly tell make the dependencies between
+ the targets. Closes: #629139
+ (Thanks, Roger Leigh)
+ * dh_auto_configure: In v9, does not include the source package name
+ in --libexecdir when using autoconf. Closes: #541458
+ * dh_auto_build, dh_auto_configure, dh: Set environment variables
+ listed by dpkg-buildflags --export. Any environment variables that
+ are already set to other values will not be changed.
+ Closes: #544844
+ * dh_movefiles: Optimise use of xargs. Closes: #627737
+ * Correct docs about multiarch and v9. Closes: #630826
+ * Fix example. Closes: #627534
+ * Fix error message. Closes: #628053
+ * dh_auto_configure: If there is a problem with cmake, display
+ the CMakeCache.txt.
+
+ -- Joey Hess <joeyh@debian.org> Fri, 24 Jun 2011 14:28:52 -0400
+
+debhelper (8.1.6) unstable; urgency=low
+
+ * dh_ucf: Fix missing space before ']'s in postrm autoscript.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 28 Apr 2011 12:33:42 -0400
+
+debhelper (8.1.5) unstable; urgency=low
+
+ * dh_ucf: New command, contributed by Jeroen Schot. Closes: #213078
+ * dh_installgsettings: Correct bug in use of find that caused some
+ gsettings files to be missed. Closes: #624377
+
+ -- Joey Hess <joeyh@debian.org> Wed, 27 Apr 2011 21:33:50 -0400
+
debhelper (8.1.4) unstable; urgency=low
* dh_clean: Remove debhelper logs for all packages, including packages
projects / debhelper.git / blobdiff