-debhelper (8.1.5) UNRELEASED; urgency=low
+debhelper (9.20120420) UNRELEASED; urgency=low
- * Fix Typos in documentation regarding {pre,post}{inst,rm}
- Closes: #623709
+ * dh_installman: Recognize sections from mdoc .Dt entries. Closes: #670210
+ Thanks, Guillem Jover
+
+ -- Joey Hess <joeyh@debian.org> Tue, 24 Apr 2012 11:52:22 -0400
+
+debhelper (9.20120419) unstable; urgency=low
+
+ * Fix compat level checking for cmake. Closes: #669181
+
+ -- Joey Hess <joeyh@debian.org> Tue, 17 Apr 2012 19:33:35 -0400
+
+debhelper (9.20120418) unstable; urgency=low
+
+ * cmake: Only pass CPPFLAGS in CFLAGS in v9.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 17 Apr 2012 16:54:39 -0400
+
+debhelper (9.20120417) unstable; urgency=low
+
+ * cmake: Pass CPPFLAGS in CFLAGS. Closes: #668813
+ Thanks, Simon Ruderich for the patch and for verifying no affected
+ package is broken by this change.
+
+ -- Joey Hess <joeyh@debian.org> Tue, 17 Apr 2012 09:10:29 -0400
+
+debhelper (9.20120410) unstable; urgency=low
+
+ [ Joey Hess ]
+ * Fix a typo. Closes: #665891
+ * Conflict with too old automake for AM_UPDATE_INFO_DIR=no. Closes: #666901
+ * dh_md5sums: Don't skip DEBIAN directories other than the control files
+ one. Closes: #668276
+
+ [ Steve Langasek ]
+ * dh_installinit: rework upstart handling to comply with new policy
+ proposal; packages will ship both an init script and an upstart job,
+ instead of just an upstart job and a symlink to a compat wrapper.
+ Closes: #577040
+
+ -- Joey Hess <joeyh@debian.org> Tue, 10 Apr 2012 12:51:15 -0400
+
+debhelper (9.20120322) unstable; urgency=low
+
+ * Revert avoid expanding shell metacharacters in sed call in autoscript().
+ It breaks dh_usrlocal and must be considered part of its interface.
+ Added to interface documentation.
+ Closes: #665263
+
+ -- Joey Hess <joeyh@debian.org> Thu, 22 Mar 2012 17:37:56 -0400
+
+debhelper (9.20120312) unstable; urgency=low
+
+ * Also include CFLAGS in ld line for perl. Closes: #662666
+
+ -- Joey Hess <joeyh@debian.org> Tue, 13 Mar 2012 14:27:06 -0400
+
+debhelper (9.20120311) unstable; urgency=low
+
+ * dh_auto_install: Set AM_UPDATE_INFO_DIR=no to avoid automake
+ generating an info dir file. Closes: #634741
+ * dh_install: Man page clarification. Closes: #659635
+ * Avoid expanding shell metacharacters in sed call in autoscript().
+ Closes: #660794
+ * dh_auto_configure: Pass CPPFLAGS and LDFLAGS to Makefile.PL and Build.PL,
+ in compat level v9. Closes: #662666
+ Thanks, Dominic Hargreaves for the patch.
+ Thanks, Alessandro Ghedini, Niko Tyni, and Dominic Hargreaves for
+ testing all relevant packages to verify the safety of this late
+ change to v9.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 11 Mar 2012 18:28:33 -0400
+
+debhelper (9.20120115) unstable; urgency=low
+
+ * Finalized v9 mode, which is the new recommended default.
+ (But continuing to use v8 is also fine.)
+ * It is now deprecated for a package to not specify a compatibility
+ level in debian/compat. Debhelper now warns if this is not done,
+ and packages without a debian/compat will eventually FTBFS.
+ * dh: --without foo,bar now supported.
+ * Updated German man page translation. Closes: #653360
+
+ -- Joey Hess <joeyh@debian.org> Sun, 15 Jan 2012 13:59:49 -0400
+
+debhelper (8.9.14) unstable; urgency=low
+
+ * Typo. Closes: #653006
+ * Typo. Closes: #653339
+
+ -- Joey Hess <joeyh@debian.org> Tue, 27 Dec 2011 11:53:44 -0400
+
+debhelper (8.9.13) unstable; urgency=low
+
+ * Pass CPPFLAGS to qmake. Closes: #646129 Thanks, Felix Geyert
+ * dh_strip: Use build-id in /usr/lib/debug in v9.
+ Closes: #642158 Thanks, Jakub Wilk
+ * Spanish translation update. Closes: #636245 Thanks, Omar Campagne
+ * Only enable executable config files in v9. The quality of file permissions
+ in debian/ directories turns out to be atrocious; who knew?
+
+ -- Joey Hess <joeyh@debian.org> Fri, 09 Dec 2011 13:53:38 -0400
+
+debhelper (8.9.12) unstable; urgency=low
+
+ * Debhelper config files may be made executable programs that output the
+ desired configuration. No further changes are planned to the config file
+ format; those needing powerful syntaxes may now use a programming language
+ of their choice. (Be careful aiming that at your feet.)
+ Closes: #235302, #372310, #235302, #614731,
+ Closes: #438601, #477625, #632860, #642129
+ * Added German translation of man pages, done by Chris Leick. Closes: #651221
+ * Typo fixes. Closes: #651224 Thanks, Chris Leick
+
+ -- Joey Hess <joeyh@debian.org> Wed, 07 Dec 2011 15:09:50 -0400
+
+debhelper (8.9.11) unstable; urgency=low
+
+ * Fix broken option passing to objcopy. Closes: #649044
+
+ -- Joey Hess <joeyh@debian.org> Thu, 17 Nov 2011 00:15:34 -0400
+
+debhelper (8.9.10) unstable; urgency=low
- -- Joey Hess <joeyh@debian.org> Fri, 22 Apr 2011 16:13:18 -0400
+ * dh_strip: In v9, pass --compress-debug-sections to objcopy.
+ Needs a new enough binutils and gdb; debhelper backport
+ may need to disable this.
+ Thanks, Aurelien Jarno and Bastien ROUCARIES. Closes: #631985
+ * dh: Ensure -a and -i are passed when running override_dh_command-arch
+ and override_dh_command-indep targets. This is needed when the binary
+ target is run, rather than binary-arch/binary-indep. Closes: #648901
+
+ -- Joey Hess <joeyh@debian.org> Wed, 16 Nov 2011 11:54:59 -0400
+
+debhelper (8.9.9) unstable; urgency=low
+
+ * dh_auto_build: Use target architecture (not host architecture)
+ for build directory name. Closes: #644553 Thanks, Tom Hughes
+ * dh: Add dh_auto_configure parameter example. Closes: #645335
+
+ -- Joey Hess <joeyh@debian.org> Fri, 04 Nov 2011 17:01:58 -0400
+
+debhelper (8.9.8) unstable; urgency=low
+
+ * dh_fixperms: Operate on .ali files throughout /usr/lib, including
+ multiarch dirs. Closes: #641279
+ * dh: Avoid compat deprecation warning before option parsing.
+ Closes: #641361
+ * Clarify description of dh_auto_* -- params. Closes: #642786
+ * Mention in debhelper(7) that buildsystem options are typically passed
+ to dh. Closes: #643069
+ * perl_makemaker: In v9, pass CFLAGS to Makefile.PL and Build.Pl
+ Closes: #643702, #497653 Thanks, Steve Langasek, gregor herrmann.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 29 Sep 2011 15:41:16 -0400
+
+debhelper (8.9.7) unstable; urgency=low
+
+ * dh: Now you can use override_dh_command-arch and override_dh_command-indep
+ to run different overrides when building arch and indep packages. This
+ allows for a much simplified form of rules file in this situation, where
+ build-arch/indep and binary-arch/indep targets do not need to be manually
+ specified. See man page for examples. Closes: #640965
+ .
+ Note that if a rules file has say, override_dh_fixperms-arch,
+ but no corresponding override_dh_fixperms-indep, then the unoverridden
+ dh_fixperms will be run on the indep packages.
+ .
+ Note that the old override_dh_command takes precidence over the new
+ overrides, because mixing the two types of overrides would have been
+ too complicated. In particular, it's difficult to ensure an
+ old override target will work if it's sometimes constrained to only
+ acting on half the packages it would normally run on. This would be
+ a source of subtle bugs, so is avoided.
+ * dh: Don't bother running dh_shlibdebs, dh_makeshlibs, or dh_strip
+ in the binary target when all packages being acted on are indep.
+ * dh: Avoid running install sequence a third time in v9 when the
+ rules file has explicit binary-indep and binary-arch targets.
+ Closes: #639341 Thanks, Yann Dirson for test case.
+ * debhelper no longer build-depends on man-db or file, to ease bootstrapping.
+ * Remove obsolete versioned dependency on perl-base.
+ * Avoid writing debhelper log files in no-act mode. Closes: #640586
+ * Tighten parsing of DEB_BUILD_OPTIONS.
+
+ -- Joey Hess <joeyh@debian.org> Sun, 11 Sep 2011 20:29:22 -0400
+
+debhelper (8.9.6) unstable; urgency=low
+
+ * dh_installlogcheck: Add support for --name. Closes: #639020
+ Thanks, Gergely Nagy
+
+ -- Joey Hess <joeyh@debian.org> Tue, 23 Aug 2011 15:25:55 -0400
+
+debhelper (8.9.5) unstable; urgency=low
+
+ * dh_compress: Don't compress _sources documentation subdirectory
+ as used by python-sphinx. Closes: #637492
+ Thanks, Jakub Wilk
+ * dh_ucf: fix test for ucf/ucfr availability and quote filenames.
+ Closes: #638944
+ Thanks, Jeroen Schot
+
+ -- Joey Hess <joeyh@debian.org> Tue, 23 Aug 2011 13:25:54 -0400
+
+debhelper (8.9.4) unstable; urgency=low
+
+ * dh: The --before --after --until and --remaining options are deprecated.
+ Use override targets instead.
+ * Assume that the package can be cleaned (i.e. the build directory can be
+ removed) as long as it is built out-of-source tree and can be configured.
+ This is useful for derivative buildsystems which generate Makefiles.
+ (Modestas Vainius) Closes: #601590
+ * dh_auto_test: Run cmake tests in parallel when allowed by
+ DEB_BUILD_OPTIONS. (Modestas Vainius) Closes: #587885
+ * dpkg-buildflags is only used to set environment in v9, to avoid
+ re-breaking packages that were already broken a first time by
+ dpkg-buildpackage unconditionally setting the environment, and
+ worked around that by unsetting variables in the rules file.
+ (Example: numpy)
+
+ -- Joey Hess <joeyh@debian.org> Sat, 06 Aug 2011 18:58:59 -0400
+
+debhelper (8.9.3) unstable; urgency=low
+
+ * dh: Remove obsolete optimisation hack that caused sequence breakage
+ in v9 with a rules file with an explict build target. Closes: #634784
+
+ -- Joey Hess <joeyh@debian.org> Tue, 19 Jul 2011 23:26:43 -0400
+
+debhelper (8.9.2) unstable; urgency=low
+
+ * dh: Support make 3.82. Closes: #634385
+
+ -- Joey Hess <joeyh@debian.org> Mon, 18 Jul 2011 17:55:24 -0400
+
+debhelper (8.9.1) unstable; urgency=low
+
+ * Typo fixes. Closes: #632662
+ * dh: In v9, do not enable any python support commands. Closes: #634106
+ * Now the QT4 version of qmake can be explicitly selected by passing
+ --buildsystem=qmake_qt4. Closes: #566840
+ * Remove debhelper.log in compat level 1. Closes: #634155
+ * dh_builddeb: Build in parallel when allowed by DEB_BUILD_OPTIONS.
+ Closes: #589427 (Thanks, Gergely Nagy and Kari Pahula)
+
+ -- Joey Hess <joeyh@debian.org> Sun, 17 Jul 2011 16:31:27 -0400
+
+debhelper (8.9.0) unstable; urgency=low
+
+ * dh: In v9, any standard rules file targets, including build-arch,
+ build-indep, build, install, etc, can be defined in debian/rules
+ without needing to explicitly tell make the dependencies between
+ the targets. Closes: #629139
+ (Thanks, Roger Leigh)
+ * dh_auto_configure: In v9, does not include the source package name
+ in --libexecdir when using autoconf. Closes: #541458
+ * dh_auto_build, dh_auto_configure, dh: Set environment variables
+ listed by dpkg-buildflags --export. Any environment variables that
+ are already set to other values will not be changed.
+ Closes: #544844
+ * dh_movefiles: Optimise use of xargs. Closes: #627737
+ * Correct docs about multiarch and v9. Closes: #630826
+ * Fix example. Closes: #627534
+ * Fix error message. Closes: #628053
+ * dh_auto_configure: If there is a problem with cmake, display
+ the CMakeCache.txt.
+
+ -- Joey Hess <joeyh@debian.org> Fri, 24 Jun 2011 14:28:52 -0400
+
+debhelper (8.1.6) unstable; urgency=low
+
+ * dh_ucf: Fix missing space before ']'s in postrm autoscript.
+
+ -- Joey Hess <joeyh@debian.org> Thu, 28 Apr 2011 12:33:42 -0400
+
+debhelper (8.1.5) unstable; urgency=low
+
+ * dh_ucf: New command, contributed by Jeroen Schot. Closes: #213078
+ * dh_installgsettings: Correct bug in use of find that caused some
+ gsettings files to be missed. Closes: #624377
+
+ -- Joey Hess <joeyh@debian.org> Wed, 27 Apr 2011 21:33:50 -0400
debhelper (8.1.4) unstable; urgency=low
for any compat level before v8. But also, such logs can occur
for other reasons, like interrupted builds during development,
and it should be safe to clean them all. Closes: #623446
+ * Fix Typos in documentation regarding {pre,post}{inst,rm}
+ Closes: #623709
- -- Joey Hess <joeyh@debian.org> Thu, 21 Apr 2011 14:12:05 -0400
+ -- Joey Hess <joeyh@debian.org> Fri, 22 Apr 2011 16:15:21 -0400
debhelper (8.1.3) unstable; urgency=low
In the meantime, lots of packages have switched to using v2, despite my
warnings that doing so leaves packages open to being broken without
notice until v2 is complete.
- * Therefore, I am calling v2 complete, as it is. Future non-compatabile
+ * Therefore, I am calling v2 complete, as it is. Future non-compatible
changes will happen in v3, which will be started soon. This means that
by using debhelper v2, one major thing changes: debhelper uses
debian/<package> as the temporary directory for *all* packages;
current compatibility level is equal to that number.
* doc/PROGRAMMING: documented that.
* debhelper itself now builds using DH_COMPAT=2.
- * dh_debstd forces DH_COMPAT=1, because it needs to stay compatable with
+ * dh_debstd forces DH_COMPAT=1, because it needs to stay compatible with
debstd after all.
-- Joey Hess <joeyh@debian.org> Thu, 1 Jul 1999 13:37:58 -0700
projects / debhelper.git / blobdiff