=head1 SYNOPSIS
-B<dh_>I<*> [B<-v>] [B<-a>] [B<-i>] [B<-s>] [B<--no-act>] [B<-ppackage>] [B<-Npackage] [-Ptmpdir>]
+B<dh_>I<*> [B<-v>] [B<-a>] [B<-i>] [B<-s>] [B<--no-act>] [B<-p>I<package>] [B<-N>I<package>] [B<-P>I<tmpdir>]
=head1 DESCRIPTION
-Debhelper is used to help you build a debian package. The philosophy behind
+Debhelper is used to help you build a Debian package. The philosophy behind
debhelper is to provide a collection of small, simple, and easily
-understood tools that are used in debian/rules to automate various common
+understood tools that are used in F<debian/rules> to automate various common
aspects of building a package. This means less work for you, the packager.
-It also, to some degree means that these tools can be changed if debian
+It also, to some degree means that these tools can be changed if Debian
policy changes, and packages that use them will require only a rebuild to
comply with the new policy.
-A typical debian/rules file that uses debhelper will call several debhelper
+A typical F<debian/rules> file that uses debhelper will call several debhelper
commands in sequence, or use L<dh(1)> to automate this process. Examples of
rules files that use debhelper are in F</usr/share/doc/debhelper/examples/>
-To create a new debian package using debhelper, you can just copy one of
-the sample rules files and edit it by hand. Or you can try the dh-make
+To create a new Debian package using debhelper, you can just copy one of
+the sample rules files and edit it by hand. Or you can try the B<dh-make>
package, which contains a L<dh_make|dh_make(1)> command that partially
-automates the process. For a more gentle introduction, the maint-guide debian
+automates the process. For a more gentle introduction, the B<maint-guide> Debian
package contains a tutorial about making your first package using debhelper.
=head1 DEBHELPER COMMANDS
-Here is the complete list of available debhelper commands. See their man
+Here is the list of debhelper commands you can use. See their man
pages for additional documentation.
=over 4
=back
-If a program's name starts with "dh_", and the program is not on the above
-list, then it is not part of the debhelper package, but it should still
+=head2 Deprecated Commands
+
+A few debhelper commands are deprecated and should not be used.
+
+=over 4
+
+#LIST_DEPRECATED#
+
+=back
+
+=head2 Other Commands
+
+If a program's name starts with B<dh_>, and the program is not on the above
+lists, then it is not part of the debhelper package, but it should still
work like the other programs described on this page.
=head1 DEBHELPER CONFIG FILES
do. Besides the common F<debian/changelog> and F<debian/control>, which are
in all packages, not just those using debhelper, some additional files can
be used to configure the behavior of specific debhelper commands. These
-files are typically named debian/package.foo (where "package" of course,
+files are typically named debian/I<package>.foo (where I<package> of course,
is replaced with the package that is being acted on).
-For example, dh_installdocs uses files named debian/package.docs to list
+For example, B<dh_installdocs> uses files named F<debian/package.docs> to list
the documentation files it will install. See the man pages of individual
commands for details about the names and formats of the files they use.
Generally, these files will list files to act on, one file per line. Some
programs in debhelper use pairs of files and destinations or slightly more
complicated formats.
-Note that if a package is the first (or only) binary package listed in
-debian/control, debhelper will use debian/foo if no debian/package.foo
-file can be found.
+Note for the first (or only) binary package listed in
+F<debian/control>, debhelper will use F<debian/foo> when there's no
+F<debian/package.foo> file.
In some rare cases, you may want to have different versions of these files
-for different architectures or OSes. If files named debian/package.foo.ARCH
-or debian/package.foo.OS exist, where "ARCH" and "OS" are the same as the
-output of "dpkg-architecture -qDEB_HOST_ARCH" /
-"dpkg-architecture -qDEB_HOST_ARCH_OS",
+for different architectures or OSes. If files named debian/I<package>.foo.I<ARCH>
+or debian/I<package>.foo.I<OS> exist, where I<ARCH> and I<OS> are the same as the
+output of "B<dpkg-architecture -qDEB_HOST_ARCH>" /
+"B<dpkg-architecture -qDEB_HOST_ARCH_OS>",
then they will be used in preference to other, more general files.
-In many cases, these config files are used to specify various types of
+Mostly, these config files are used to specify lists of various types of
files. Documentation or example files to install, files to move, and so on.
When appropriate, in cases like these, you can use standard shell wildcard
-characters ('?' and '*' and '[..]' character classes) in the files.
-
-You can also put comments in these files; lines beginning with "#" are
+characters (B<?> and B<*> and B<[>I<..>B<]> character classes) in the files.
+You can also put comments in these files; lines beginning with B<#> are
ignored.
+The syntax of these files is intentionally kept very simple to make them
+easy to read, understand, and modify. If you prefer power and complexity,
+you can make the file executable, and write a program that outputs
+whatever content is appropriate for a given situation. When you do so,
+the output is not further processed to expand wildcards or strip comments.
+
=head1 SHARED DEBHELPER OPTIONS
The following command line options are supported by all debhelper programs.
Act on all architecture independent packages.
-=item B<-
>I<ppackage>, B<--package=>I<package>
+=item B<-
p>I<package>, B<--package=>I<package>
-Act on the package named "package". This option may be specified multiple
+Act on the package named I<package>. This option may be specified multiple
times to make debhelper operate on a given set of packages.
=item B<-s>, B<--same-arch>
-This used to be a smarter version of the -a flag, but the -a flag is now
+This used to be a smarter version of the B<-a> flag, but the B<-a> flag is now
equally smart.
=item B<-N>I<package>, B<--no-package=>I<package>
-Do not act on the specified package even if an -a, -i, or -p option lists
+Do not act on the specified package even if an B<-a>, B<-i>, or B<-p> option lists
the package as one that should be acted on.
=item B<--remaining-packages>
=item B<--ignore=>I<file>
-Ignore the specified file. This can be used if debian/ contains a debhelper
+Ignore the specified file. This can be used if F<debian/> contains a debhelper
config file that a debhelper command should not act on. Note that
-debian/compat, debian/control, and debian/changelog can't be ignored, but
+F<debian/compat>, F<debian/control>, and F<debian/changelog> can't be ignored, but
then, there should never be a reason to ignore those files.
-For example, if upstream ships a debian/init that you don't want
-dh_installinit to install, use --ignore=debian/init
+For example, if upstream ships a F<debian/init> that you don't want
+B<dh_installinit> to install, use B<--ignore=debian/init>
=item B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>
-Use
"tmpdir" for package build directory. The default is debian/<package>
+Use
I<tmpdir> for package build directory. The default is debian/I<package>
=item B<--mainpackage=>I<package>
This little-used option changes the package which debhelper considers the
-"main package", that is, the first one listed in debian/control, and the
-one for which debian/foo files can be used instead of the usual
-debian/package.foo files.
+"main package", that is, the first one listed in F<debian/control>, and the
+one for which F<debian/foo> files can be used instead of the usual
+F<debian/package.foo> files.
+
+=item B<-O=>I<option>|I<bundle>
+
+This is used by L<dh(1)> when passing user-specified options to all the
+commands it runs. If the command supports the specified option or option
+bundle, it will take effect. If the command does not support the option (or
+any part of an option bundle), it will be ignored.
=back
=item B<-n>
-Do not modify postinst/postrm/etc scripts.
+Do not modify F<postinst>, F<postrm>, etc. scripts.
=item B<-X>I<item>, B<--exclude=>I<item>
=head1 BUILD SYSTEM OPTIONS
-The following command line options are supported by all of the dh_auto_*
+The following command line options are supported by all of the B<dh_auto_>I<*>
debhelper programs. These programs support a variety of build systems,
and normally heuristically determine which to use, and how to use them.
You can use these command line options to override the default behavior.
+Typically these are passed to L<dh(1)>, which then passes them to all the
+B<dh_auto_>I<*> programs.
=over 4
I<directory> rather than the top level directory of the Debian
source package tree.
-=item B<-B>[I<directory>], B<--builddirectory>=[I<directory>]
+=item B<-B>[I<directory>], B<--builddirectory=>[I<directory>]
Enable out of source building and use the specified I<directory> as the build
directory. If I<directory> parameter is omitted, a default build directory
If this option is not specified, building will be done in source by default
unless the build system requires or prefers out of source tree building.
In such a case, the default build directory will be used even if
-L<--builddirectory> is not specified.
+B<--builddirectory> is not specified.
If the build system prefers out of source tree building but still
allows in source building, the latter can be re-enabled by passing a build
directory path that is the same as the source directory path.
-=item B<--max-parallel>[I<=maximum>]
+=item B<--parallel>
+
+Enable parallel builds if underlying build system supports them.
+The number of parallel jobs is controlled by the
+B<DEB_BUILD_OPTIONS> environment variable (L<Debian Policy, section 4.9.1>) at
+build time. It might also be subject to a build system specific limit.
-By default, the DEB_BUILD_OPTIONS environment variable can be used to
-enable parallel building, when supported by the build system.
+If this option is not specified, debhelper currently defaults to not
+allowing parallel package builds.
-This option allows controlling how many parallel jobs can be used in a
-build. If set to 1, concurrent builds are disabled -- do this if
-the package build is known not to work in parallel. If the package build
-is known to only work with certian levels of concurrency, you can set this
-to the maximum level that is known to work, or that you wish to support.
+=item B<--max-parallel=>I<maximum>
+
+This option implies B<--parallel> and allows further limiting the number of
+jobs that can be used in a parallel build. If the package build is known to
+only work with certain levels of concurrency, you can set this to the maximum
+level that is known to work, or that you wish to support.
=item B<--list>, B<-l>
List all build systems supported by debhelper on this system. The list
includes both default and third party build systems (marked as such). Also
shows which build system would be automatically selected, or which one
-is manually specified with the I<--buildsystem> option.
+is manually specified with the B<--buildsystem> option.
=back
-=head1 NOTES
-
-=head2 Multiple binary package support
-
-If your source package generates more than one binary package, debhelper
-programs will default to acting on all binary packages when run. If your
-source package happens to generate one architecture dependent package, and
-another architecture independent package, this is not the correct behavior,
-because you need to generate the architecture dependent packages in the
-binary-arch debian/rules target, and the architecture independent packages
-in the binary-indep debian/rules target.
-
-To facilitate this, as well as give you more control over which packages
-are acted on by debhelper programs, all debhelper programs accept the
-B<-a>, B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative.
-If none are given, debhelper programs default to acting on all packages listed
-in the control file.
-
-=head2 Automatic generation of debian install scripts
-
-Some debhelper commands will automatically generate parts of debian
-maintainer scripts. If you want these automatically generated things
-included in your existing debian maintainer scripts, then you need to add
-"#DEBHELPER#" to your scripts, in the place the code should be added.
-"#DEBHELPER#" will be replaced by any auto-generated code when you run
-dh_installdeb.
-
-If a script does not exist at all and debhelper needs to add something to
-it, then debhelper will create the complete script.
-
-All debhelper commands that automatically generate code in this way let it
-be disabled by the -n parameter (see above).
-
-Note that the inserted code will be shell code, so you cannot directly use
-it in a perl script. If you would like to embed it into a perl script, here
-is one way to do that (note that I made sure that $1, $2, etc are set with
-the set command):
-
- my $temp="set -e\nset -- @ARGV\n" . << 'EOF';
- #DEBHELPER#
- EOF
- system ($temp) / 256 == 0
- or die "Problem with debhelper scripts: $!";
-
-=head2 Automatic generation of miscellaneous dependencies.
-
-Some debhelper commands may make the generated package need to depend on
-some other packages. For example, if you use L<dh_installdebconf(1)>, your
-package will generally need to depend on debconf. Or if you use
-L<dh_installxfonts(1)>, your package will generally need to depend on a
-particular version of xutils. Keeping track of these miscellaneous
-dependencies can be annoying since they are dependant on how debhelper does
-things, so debhelper offers a way to automate it.
-
-All commands of this type, besides documenting what dependencies may be
-needed on their man pages, will automatically generate a substvar called
-${misc:Depends}. If you put that token into your debian/control file, it
-will be expanded to the dependencies debhelper figures you need.
-
-This is entirely independent of the standard ${shlibs:Depends} generated by
-L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>.
-You can choose not to use any of these, if debhelper's guesses don't match
-reality.
-
-=head2 Package build directories
-
-By default, all debhelper programs assume that the temporary directory used
-for assembling the tree of files in a package is debian/<package>.
-
-Sometimes, you might want to use some other temporary directory. This is
-supported by the -P flag. For example, "dh_installdocs -Pdebian/tmp", will
-use debian/tmp as the temporary directory. Note that if you use -P, the
-debhelper programs can only be acting on a single package at a time. So if
-you have a package that builds many binary packages, you will need to also
-use the -p flag to specify which binary package the debhelper program will
-act on.
-
-=head2 Debhelper compatibility levels
+=head1 COMPATIBILITY LEVELS
From time to time, major non-backwards-compatible changes need to be made
to debhelper, to keep it clean and well-designed as needs change and its
it modifies its behavior in various ways.
Tell debhelper what compatibility level to use by writing a number to
-debian/compat. For example, to turn on V7 mode:
+F<debian/compat>. For example, to turn on v9 mode:
+
+ % echo 9 > debian/compat
- % echo 7 > debian/compat
+Your package will also need a versioned build dependency on a version of
+debhelper equal to (or greater than) the compatibility level your package
+uses. So for compatibility level 9, ensure debian/control has:
+
+ Build-Depends: debhelper (>= 9)
Unless otherwise indicated, all debhelper documentation assumes that you
are using the most recent compatibility level, and in most cases does not
=over 4
-=item V1
+=item v1
This is the original debhelper compatibility level, and so it is the default
-one. In this mode, debhelper will use debian/tmp as the package tree
+one. In this mode, debhelper will use F<debian/tmp> as the package tree
directory for the first binary package listed in the control file, while using
-debian/<package> for all other packages listed in the control file.
+debian/I<package> for all other packages listed in the F<control> file.
This mode is deprecated.
-=item V2
+=item v2
-In this mode, debhelper will consistently use debian/<package>
+In this mode, debhelper will consistently use debian/
I<package>
as the package tree directory for every package that is built.
This mode is deprecated.
-=item V3
+=item v3
-This mode works like V2, with the following additions:
+This mode works like v2, with the following additions:
=over 8
=item -
-Debhelper config files support globbing via * and ?, when appropriate. To
+Debhelper config files support globbing via B<*> and B<?>, when appropriate. To
turn this off and use those characters raw, just prefix with a backslash.
=item -
-dh_makeshlibs makes the postinst and postrm scripts call ldconfig.
+B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call B<ldconfig>.
=item -
-Every file in etc/ is automatically flagged as a conffile by dh_installdeb.
+Every file in F<etc/> is automatically flagged as a conffile by B<dh_installdeb>.
=back
This mode is deprecated.
-=item V4
+=item v4
-Changes from V3 are:
+Changes from v3 are:
=over 8
=item -
-dh_makeshlibs -V will not include the debian part of the version number in
+B<dh_makeshlibs -V> will not include the Debian part of the version number in
the generated dependency line in the shlibs file.
=item -
-You are encouraged to put the new ${misc:Depends} into debian/control to
-supplement the ${shlibs:Depends} field.
+You are encouraged to put the new B<${misc:Depends}> into F<debian/control> to
+supplement the B<${shlibs:Depends}> field.
=item -
-dh_fixperms will make all files in bin/ directories and in etc/init.d
+B<dh_fixperms> will make all files in F<bin/> directories and in F<etc/init.d>
executable.
=item -
-dh_link will correct existing links to conform with policy.
+B<dh_link> will correct existing links to conform with policy.
=back
This mode is deprecated.
-=item V5
+=item v5
-Changes from V4 are:
+Changes from v4 are:
=over 8
=item -
-dh_strip --dbg-package now specifies the name of a package to put debugging
+B<dh_strip --dbg-package> now specifies the name of a package to put debugging
symbols in, not the packages to take the symbols from.
=item -
-dh_installdocs skips installing empty files.
+B<dh_installdocs> skips installing empty files.
=item -
-dh_install errors out if wildcards expand to nothing.
+B<dh_install> errors out if wildcards expand to nothing.
=back
-=item V6
+=item v6
-Changes from V5 are:
+Changes from v5 are:
=over 8
=item -
Commands that generate maintainer script fragments will order the
-fragments in reverse order for the prerm and postrm scripts.
+fragments in reverse order for the F<prerm> and F<postrm> scripts.
=item -
-dh_installwm will install a slave manpage link for x-window-manager.1.gz,
-if it sees the man page in usr/share/man/man1 in the package build
+B<dh_installwm> will install a slave manpage link for F<x-window-manager.1.gz>,
+if it sees the man page in F<usr/share/man/man1> in the package build
directory.
=item -
-dh_builddeb did not previously delete everything matching
-DH_ALWAYS_EXCLUDE, if it was set to a list of things to exclude, such as
-"CVS:.svn:.git". Now it does.
+B<dh_builddeb> did not previously delete everything matching
+B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as
+B<CVS:.svn:.git>. Now it does.
=item -
-dh_installman allows overwriting existing man pages in the package build
+B<dh_installman> allows overwriting existing man pages in the package build
directory. In previous compatibility levels it silently refuses to do this.
=back
-=item V7
-
-This is the recommended mode of operation.
+=item v7
-Changes from V6 are:
+Changes from v6 are:
=over 8
=item -
-dh_install, will fall back to looking for files in debian/tmp if it doesn't
+B<dh_install>, will fall back to looking for files in F<debian/tmp> if it doesn't
find them in the current directory (or wherever you tell it look using
---sourcedir). This allows dh_install to interoperate with dh_auto_install,
-which installs to debian/tmp, without needing any special parameters.
+B<--sourcedir>). This allows B<dh_install> to interoperate with B<dh_auto_install>,
+which installs to F<debian/tmp>, without needing any special parameters.
=item -
-dh_clean will read debian/clean and delete files listed there.
+B<dh_clean> will read F<debian/clean> and delete files listed there.
=item -
-dh_clean will delete toplevel *-stamp files.
+B<dh_clean> will delete toplevel F<*-stamp> files.
=item -
-dh_installchangelogs will guess at what file is the upstream changelog if
+B<dh_installchangelogs> will guess at what file is the upstream changelog if
none is specified.
=back
+=item v8
+
+Changes from v7 are:
+
+=over 8
+
+=item -
+
+Commands will fail rather than warning when they are passed unknown options.
+
+=item -
+
+B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it
+generates shlibs files for. So B<-X> can be used to exclude libraries.
+Also, libraries in unusual locations that B<dpkg-gensymbols> would not
+have processed before will be passed to it, a behavior change that
+can cause some packages to fail to build.
+
+=item -
+
+B<dh> requires the sequence to run be specified as the first parameter, and
+any switches come after it. Ie, use "B<dh $@ --foo>", not "B<dh --foo $@>".
+
+=item -
+
+B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to F<Makefile.PL>.
+
=back
-=head2 udebs
+=item v9
-Debhelper includes support for udebs. To create a udeb with debhelper,
-add "XC-Package-Type: udeb" to the package's stanza in debian/control, and
-build-depend on debhelper (>= 4.2). Debhelper will try to create udebs that
-comply with debian-installer policy, by making the generated package files
-end in ".udeb", not installing any documentation into a udeb, skipping over
-preinst, postrm, prerm, and config scripts, etc.
+This is the recommended mode of operation.
+
+Changes from v8 are:
+
+=over 8
-=head2 Other notes
+=item -
-In general, if any debhelper program needs a directory to exist under
-debian/, it will create it. I haven't bothered to document this in all the
-man pages, but for example, dh_installdeb knows to make debian/<package>/DEBIAN/
-before trying to put files there, dh_installmenu knows you need a
-debian/<package>/usr/share/menu/ before installing the menu files, etc.
+Multiarch support. In particular, B<dh_auto_configure> passes
+multiarch directories to autoconf in --libdir and --libexecdir.
-Once your package uses debhelper to build, be sure to add
-debhelper to your Build-Depends line in debian/control. You should
-build-depend on a version of debhelper equal to (or greater than) the
-debhelper compatibility level your package uses. So if your package used
-compatibility level 7:
+=item -
+
+dh is aware of the usual dependencies between targets in debian/rules.
+So, "dh binary" will run any build, build-arch, build-indep, install,
+etc targets that exist in the rules file. There's no need to define an
+explicit binary target with explicit dependencies on the other targets.
+
+=item -
+
+B<dh_strip> compresses debugging symbol files to reduce the installed
+size of -dbg packages.
+
+=item -
+
+B<dh_auto_configure> does not include the source package name
+in --libexecdir when using autoconf.
+
+=item -
+
+B<dh> does not default to enabling --with=python-support
+
+=item -
+
+All of the B<dh_auto_>I<*> debhelper programs and B<dh> set
+environment variables listed by B<dpkg-buildflags>, unless
+they are already set.
+
+=item -
+
+B<dh_auto_configure> passes B<dpkg-buildflags> CFLAGS, CPPFLAGS, and
+LDFLAGS to perl F<Makefile.PL> and F<Build.PL>
+
+=item -
+
+B<dh_strip> puts separated debug symbols in a location based on their
+build-id.
+
+=item -
+
+Executable debhelper config files are run and their output used as the
+configuration.
+
+=back
+
+=item v10
+
+This compatibility level is still open for development; use with caution.
+
+Changes from v9 are:
+
+=over 8
+
+=item -
+
+None yet..
+
+=back
+
+=back
+
+=head1 NOTES
+
+=head2 Multiple binary package support
+
+If your source package generates more than one binary package, debhelper
+programs will default to acting on all binary packages when run. If your
+source package happens to generate one architecture dependent package, and
+another architecture independent package, this is not the correct behavior,
+because you need to generate the architecture dependent packages in the
+binary-arch F<debian/rules> target, and the architecture independent packages
+in the binary-indep F<debian/rules> target.
+
+To facilitate this, as well as give you more control over which packages
+are acted on by debhelper programs, all debhelper programs accept the
+B<-a>, B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative.
+If none are given, debhelper programs default to acting on all packages listed
+in the control file.
+
+=head2 Automatic generation of Debian install scripts
+
+Some debhelper commands will automatically generate parts of Debian
+maintainer scripts. If you want these automatically generated things
+included in your existing Debian maintainer scripts, then you need to add
+B<#DEBHELPER#> to your scripts, in the place the code should be added.
+B<#DEBHELPER#> will be replaced by any auto-generated code when you run
+B<dh_installdeb>.
+
+If a script does not exist at all and debhelper needs to add something to
+it, then debhelper will create the complete script.
+
+All debhelper commands that automatically generate code in this way let it
+be disabled by the -n parameter (see above).
+
+Note that the inserted code will be shell code, so you cannot directly use
+it in a Perl script. If you would like to embed it into a Perl script, here
+is one way to do that (note that I made sure that $1, $2, etc are set with
+the set command):
+
+ my $temp="set -e\nset -- @ARGV\n" . << 'EOF';
+ #DEBHELPER#
+ EOF
+ system ($temp) / 256 == 0
+ or die "Problem with debhelper scripts: $!";
+
+=head2 Automatic generation of miscellaneous dependencies.
+
+Some debhelper commands may make the generated package need to depend on
+some other packages. For example, if you use L<dh_installdebconf(1)>, your
+package will generally need to depend on debconf. Or if you use
+L<dh_installxfonts(1)>, your package will generally need to depend on a
+particular version of xutils. Keeping track of these miscellaneous
+dependencies can be annoying since they are dependent on how debhelper does
+things, so debhelper offers a way to automate it.
+
+All commands of this type, besides documenting what dependencies may be
+needed on their man pages, will automatically generate a substvar called
+B<${misc:Depends}>. If you put that token into your F<debian/control> file, it
+will be expanded to the dependencies debhelper figures you need.
+
+This is entirely independent of the standard B<${shlibs:Depends}> generated by
+L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)>.
+You can choose not to use any of these, if debhelper's guesses don't match
+reality.
- Build-Depends: debhelper (>= 7)
+=head2 Package build directories
+
+By default, all debhelper programs assume that the temporary directory used
+for assembling the tree of files in a package is debian/I<package>.
+
+Sometimes, you might want to use some other temporary directory. This is
+supported by the B<-P> flag. For example, "B<dh_installdocs -Pdebian/tmp>", will
+use B<debian/tmp> as the temporary directory. Note that if you use B<-P>, the
+debhelper programs can only be acting on a single package at a time. So if
+you have a package that builds many binary packages, you will need to also
+use the B<-p> flag to specify which binary package the debhelper program will
+act on.
+
+=head2 udebs
+
+Debhelper includes support for udebs. To create a udeb with debhelper,
+add "B<Package-Type: udeb>" to the package's stanza in F<debian/control>.
+Debhelper will try to create udebs that comply with debian-installer
+policy, by making the generated package files end in F<.udeb>, not
+installing any documentation into a udeb, skipping over
+F<preinst>, F<postrm>, F<prerm>, and F<config> scripts, etc.
=head1 ENVIRONMENT
=over 4
-=item DH_VERBOSE
+=item B<DH_VERBOSE>
-Set to 1 to enable verbose mode. Debhelper will output every command it runs
+Set to B<1> to enable verbose mode. Debhelper will output every command it runs
that modifies files on the build system.
-=item DH_COMPAT
+=item B<DH_COMPAT>
Temporarily specifies what compatibility level debhelper should run at,
-overriding any value in debian/compat.
+overriding any value in F<debian/compat>.
-=item DH_NO_ACT
+=item B<DH_NO_ACT>
-Set to 1 to enable no-act mode.
+Set to B<1> to enable no-act mode.
-=item DH_OPTIONS
+=item B<DH_OPTIONS>
Anything in this variable will be prepended to the command line arguments
-of all debhelper commands. Command-specific options will be ignored by
-commands that do not support them.
+of all debhelper commands.
-This is useful in some situations, for example, if you need to pass -p to
-all debhelper commands that will be run. One good way to set DH_OPTIONS is
-by using "Target-specific Variable Values" in your debian/rules file. See
-the make documentation for details on doing this.
+When using L<dh(1)>, it can be passed options that will be passed on to each
+debhelper command, which is generally better than using DH_OPTIONS.
-=item DH_ALWAYS_EXCLUDE
+=item B<DH_ALWAYS_EXCLUDE>
-If set, this adds the value the variable is set to to the -X options of all
-commands that support the -X option. Moreover, dh_builddeb will rm -rf
+If set, this adds the value the variable is set to to the B<-X> options of all
+commands that support the B<-X> option. Moreover, B<dh_builddeb> will B<rm -rf>
anything that matches the value in your package build tree.
This can be useful if you are doing a build from a CVS source tree, in
-which case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories
+which case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories
from sneaking into the package you build. Or, if a package has a source
tarball that (unwisely) includes CVS directories, you might want to export
-DH_ALWAYS_EXCLUDE=CVS in debian/rules, to make it take effect wherever
+B<DH_ALWAYS_EXCLUDE=CVS> in F<debian/rules>, to make it take effect wherever
your package is built.
Multiple things to exclude can be separated with colons, as in
-DH_ALWAYS_EXCLUDE=CVS:.svn
+B<DH_ALWAYS_EXCLUDE=CVS:.svn>
=back
=item F</usr/share/doc/debhelper/examples/>
-A set of example debian/rules files that use debhelper.
+A set of example F<debian/rules> files that use debhelper.
=item L<http://kitenet.net/~joey/code/debhelper/>
projects / debhelper.git / blobdiff