%define name autorandr %define version 1.8.1 %define release 1 # pmutils %define use_pm_utils 1 %if 0%{?fedora} > 22 %define use_pm_utils 0 %endif %if 0%{?rhel} > 7 %define use_pm_utils 0 %endif # python 2 or 3 %define py_ver 3 %if 0%{?rhel} %define py_ver 2 %endif Summary: Automatically select a display configuration based on connected devices Name: %{name} Version: %{version} Release: %{release}%{?dist} Source0: https://github.com/phillipberndt/%{name}/archive/%{version}/%{name}-%{version}.tar.gz License: GPLv3 Group: Development/Libraries BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot Prefix: %{_prefix} BuildArch: noarch Vendor: Phillip Berndt Url: https://github.com/phillipberndt/autorandr Requires: python%{py_ver} %if 0%{?use_pm_utils} Requires: pm-utils %endif %{?systemd_ordering} BuildRequires: bash-completion BuildRequires: python%{py_ver}-devel BuildRequires: systemd BuildRequires: udev %description # autorandr Automatically select a display configuration based on connected devices ## Branch information This is a compatible Python rewrite of [wertarbyte/autorandr](https://github.com/wertarbyte/autorandr). Contributions for bash-completion, fd.o/XDG autostart, Nitrogen, pm-utils, and systemd can be found under [contrib](contrib/). The original [wertarbyte/autorandr](https://github.com/wertarbyte/autorandr) tree is unmaintained, with lots of open pull requests and issues. I forked it and merged what I thought were the most important changes. If you are searching for that version, see the [`legacy` branch](https://github.com/phillipberndt/autorandr/tree/legacy). Note that the Python version is better suited for non-standard configurations, like if you use `--transform` or `--reflect`. If you use `auto-disper`, you have to use the bash version, as there is no disper support in the Python version (yet). Both versions use a compatible configuration file format, so you can, to some extent, switch between them. I will maintain the `legacy` branch until @wertarbyte finds the time to maintain his branch again. If you are interested in why there are two versions around, see [#7](https://github.com/phillipberndt/autorandr/issues/7), [#8](https://github.com/phillipberndt/autorandr/issues/8) and especially [#12](https://github.com/phillipberndt/autorandr/issues/12) if you are unhappy with this version and would like to contribute to the bash version. ## License information and authors autorandr is available under the terms of the GNU General Public License (version 3). Contributors to this version of autorandr are: * Adrián López * andersonjacob * Alexander Wirt * Brice Waegeneire * Chris Dunder * Christoph Gysin * Daniel Hahler * Maciej Sitarz * Mathias Svensson * Matthew R Johnson * Nazar Mokrynskyi * Phillip Berndt * Rasmus Wriedt Larsen * Simon Wydooghe * Stefan Tomanek * stormc * tachylatus * Timo Bingmann * Timo Kaufmann * Tomasz Bogdal * Victor Häggqvist * Jan-Oliver Kaiser ## Installation/removal You can use the `autorandr.py` script as a stand-alone binary. If you'd like to install it as a system-wide application, there is a Makefile included that also places some configuration files in appropriate directories such that autorandr is invoked automatically when a monitor is connected or removed, the system wakes up from suspend, or a user logs into an X11 session. Run `make install` as root to install it. If you prefer to have a system wide install managed by your package manager, you can * Use the [official Arch package](https://www.archlinux.org/packages/community/any/autorandr/). * Use the [official Debian package](https://packages.debian.org/sid/x11/autorandr) on sid * Use the [ebuild from zugaina](https://gpo.zugaina.org/x11-misc/autorandr) on Gentoo. * Use the [nix package](https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/autorandr.nix) on NixOS. * Use the automated nightlies generated by the [openSUSE build service](https://build.opensuse.org/package/show/home:phillipberndt/autorandr) for various distributions (RPM and DEB based). * Use the [X binary package system](https://wiki.voidlinux.eu/XBPS)' on Void Linux * Build a .deb-file from the source tree using `make deb`. We appreciate packaging scripts for other distributions, please file a pull request if you write one. If you prefer `pip` over your package manager, you can install autorandr with: sudo pip install "git+http://github.com/phillipberndt/autorandr#egg=autorandr" or simply sudo pip install autorandr if you prefer to use a stable version. ## How to use Save your current display configuration and setup with: autorandr --save mobile Connect an additional display, configure your setup and save it: autorandr --save docked Now autorandr can detect which hardware setup is active: $ autorandr mobile docked (detected) To automatically reload your setup: $ autorandr --change To manually load a profile: $ autorandr --load or simply: $ autorandr autorandr tries to avoid reloading an identical configuration. To force the (re)configuration: $ autorandr --load --force To prevent a profile from being loaded, place a script call _block_ in its directory. The script is evaluated before the screen setup is inspected, and in case of it returning a value of 0 the profile is skipped. This can be used to query the status of a docking station you are about to leave. If no suitable profile can be identified, the current configuration is kept. To change this behaviour and switch to a fallback configuration, specify `--default `. The system-wide installation of autorandr by default calls autorandr with a parameter `--default default`. There are three special, virtual configurations called `horizontal`, `vertical` and `common`. They automatically generate a configuration that incorporates all screens connected to the computer. You can symlink `default` to one of these names in your configuration directory to have autorandr use any of them as the default configuration without you having to change the system-wide configuration. You can store default values for any option in an INI-file in `~/.config/autorandr/settings.ini` in a section `config`. The most useful candidate for doing that is `skip-options`, if you need it. ## Advanced usage ### Hook scripts Three more scripts can be placed in the configuration directory (as (as defined by the [XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html), usually `~/.config/autorandr` or `~/.autorandr` if you have an old installation for user configuration and `/etc/xdg/autorandr` for system wide configuration): - `postswitch` is executed *after* a mode switch has taken place. This can be used to notify window managers or other applications about the switch. - `preswitch` is executed *before* a mode switch takes place. - `postsave` is executed after a profile was stored or altered. - `predetect` is executed before autorandr attempts to run xrandr. These scripts must be executable and can be placed directly in the configuration directory, where they will always be executed, or in the profile subdirectories, where they will only be executed on changes regarding that specific profile. Instead (or in addition) to these scripts, you can also place as many executable files as you like in subdirectories called `script_name.d` (e.g. `postswitch.d`). If a script with the same name occurs multiple times, user configuration takes precedence over system configuration (as specified by the [XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html)) and profile configuration over general configuration. As a concrete example, suppose you have the files - `/etc/xdg/autorandr/postswitch` - `~/.config/autorandr/postswitch` - `~/.config/autorandr/postswitch.d/notify-herbstluftwm` - `~/.config/autorandr/docked/postswitch` and switch from `mobile` to `docked`. Then `~/.config/autorandr/docked/postswitch` is executed, since the profile specific configuration takes precedence, and `~/.config/autorandr/postswitch.d/notify-herbstluftwm` is executed, since it has a unique name. If you switch back from `docked` to `mobile`, `~/.config/autorandr/postswitch` is executed instead of the `mobile` specific `postswitch`. In these scripts, some of autorandr's state is exposed as environment variables prefixed with `AUTORANDR_`, such as: - `AUTORANDR_CURRENT_PROFILE` - `AUTORANDR_CURRENT_PROFILES` - `AUTORANDR_PROFILE_FOLDER` - `AUTORANDR_MONITORS` If you experience issues with xrandr being executed too early after connecting a new monitor, then you can use a `predetect` script to delay the execution. Write e.g. `sleep 1` into that file to make autorandr wait a second before running `xrandr`. ### Wildcard EDID matching The EDID strings in the `~/.config/autorandr/*/setup` files may contain an asterisk to enable wildcard matching: Such EDIDs are matched against connected monitors using the usual file name globbing rules. This can be used to create profiles matching multiple (or any) monitors. ## Changelog **autorandr 1.8.1** * *2019-03-18* Removed mandb call from Makefile **autorandr 1.8** * *2019-02-17* Add an X11 daemon that runs autorandr when a display connects (by @rliou92, #127) * *2019-02-17* Replace width=0 check with disconnected to detect disconnected monitors (by @joseph-jones, #139) * *2019-02-17* Fix handling of empty padding (by @jschwab, #138) * *2019-02-17* Add a man page (by @somers-all-the-time, #133) **autorandr 1.7** * *2018-09-25* Fix FB size computation with rotated screens (by @Janno, #117) **autorandr 1.6** * *2018-04-19* Bugfix: Do not load default profile unless --change is set * *2018-04-30* Added a `AUTORANDR_MONITORS` variable to hooks (by @bricewge, #106) * *2018-06-29* Fix detection of current configuration if extra monitors are active * *2018-07-11* Bugfix in the latest change: Correctly handle "off" minitors when comparing * *2018-07-19* Do not kill spawned user processes from systemd unit * *2018-07-20* Correctly handle "off" monitors when comparing -- fixup for another bug. **autorandr 1.5** * *2018-01-03* Add --version * *2018-01-04* Fixed vertical/horizontal/clone-largest virtual profiles * *2018-03-07* Output all non-error messages to stdout instead of stderr * *2018-03-25* Add --detected and --current to filter the profile list output * *2018-03-25* Allow wildcard matching in EDIDs **autorandr 1.4** * *2017-12-22* Fixed broken virtual profile support * *2017-12-14* Added support for a settings file * *2017-12-14* Added a virtual profile `off`, which disables all screens **autorandr 1.3** * *2017-11-13* Add a short form for `--load` * *2017-11-21* Fix environment stealing in `--batch` mode (See #87) **autorandr 1.2** * *2017-07-16* Skip `--panning` unless it is required (See #72) * *2017-10-13* Add `clone-largest` virtual profile **autorandr 1.1** * *2017-06-07* Call systemctl with `--no-block` from udev rule (See #61) * *2017-01-20* New script hook, `predetect` * *2017-01-18* Accept comments (lines starting with `#`) in config/setup files **autorandr 1.0** * *2016-12-07* Tag the current code as version 1.0.0; see github issue #54 * *2016-10-03* Install a desktop file to `/etc/xdg/autostart` by default %prep %setup -n %{name}-%{version} -n %{name}-%{version} %if %{py_ver} == 3 pathfix.py -pni "%{__python3} %{py3_shbang_opts}" ./autorandr.py %else pathfix.py -pni "%{__python2} %{py2_shbang_opts}" ./autorandr.py %endif %install make DESTDIR="%{buildroot}" PREFIX=/usr install install -vDm 644 README.md -t "%{buildroot}/usr/share/doc/%{name}/" %files %defattr(-,root,root,-) %attr(0644,root,root) %{_unitdir}/autorandr.service %license gpl-3.0.txt %doc README.md %config(noreplace) %{_sysconfdir}/* %{_bindir}/* %{_mandir} %{_datarootdir}/bash-completion/completions/autorandr %{_udevrulesdir}/40-monitor-hotplug.rules %changelog * Wed May 22 2019 Maciej Sitarz - 1.8.1-1 - Updated to stable 1.8.1 * Fri Sep 28 2018 Maciej Sitarz - 1.7-1 - Updated to stable 1.7 * Thu Jul 19 2018 Maciej Sitarz - 1.5-1 - Updated to stable 1.5 - Changed dest path for systemd service file * Sun Oct 01 2017 Jerzy Drozdz - 1.1-2 - Added conditionals for pm-utils, compability with Fedora26+ - Removed bash-completion from requisites - Removed udev from requisites * Sun Sep 03 2017 Jerzy Drozdz - 1.1-1 - Update to stable 1.1 * Fri Feb 17 2017 Jerzy Drozdz - 20170217git-1 - Update to master * Wed Jul 6 2016 Jerzy Drozdz - 20160706git-1 - Set default value of $XDG_CONFIG_DIRS to fulfill the standard * Fri Jul 1 2016 Jerzy Drozdz - 20160701git-1.1 - fixed running udevadm in post * Fri Jul 1 2016 Jerzy Drozdz - 20160701git-1 - initial build