From c9b11560bf41617adf75366517ccfe15e2c2aab3 Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 6 May 2015 10:07:23 +0900 Subject: [PATCH] Updated FAQ (markdown) --- FAQ.md | 51 ++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 40 insertions(+), 11 deletions(-) diff --git a/FAQ.md b/FAQ.md index 4a89d6d50..39de3b5ef 100644 --- a/FAQ.md +++ b/FAQ.md @@ -106,21 +106,50 @@ http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf ## Bootloader jump doesn't work -Properly configure boot section size in Makefile. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. -- https://github.com/tmk/tmk_keyboard#magic-commands -- https://github.com/tmk/tmk_keyboard#bootloader - +Properly configure bootloader size in Makefile. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. ``` -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 (TMK Alt Controller) -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Size of Bootloaders in bytes: +# Atmel DFU loader(ATmega32U4) 4096 +# Atmel DFU loader(AT90USB128) 8192 +# LUFA bootloader(ATmega32U4) 4096 +# Arduino Caterina(ATmega32U4) 4096 +# USBaspLoader(ATmega***) 2048 +# Teensy halfKay(ATmega32U4) 512 +# Teensy++ halfKay(AT90USB128) 1024 OPT_DEFS += -DBOOTLOADER_SIZE=4096 ``` +AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet. +Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**. + +AVR Boot section is located at end of Flash memory like the followings. +``` +byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) +0x0000 +---------------+ 0x00000 +---------------+ + | | | | + | | | | + | Application | | Application | + | | | | + = = = = + | | 32KB-4KB | | 128KB-8KB +0x6000 +---------------+ 0x1FC00 +---------------+ + | Bootloader | 4KB | Bootloader | 8KB +0x7FFF +---------------+ 0x1FFFF +---------------+ + + +byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) +0x0000 +---------------+ 0x00000 +---------------+ + | | | | + | | | | + | Application | | Application | + | | | | + = = = = + | | 32KB-512B | | 128KB-1KB +0x7E00 +---------------+ 0x1FC00 +---------------+ + | Bootloader | 512B | Bootloader | 1KB +0x7FFF +---------------+ 0x1FFFF +---------------+ +``` -And see this discussion. +And see this discussion for further reference. https://github.com/tmk/tmk_keyboard/issues/179 -- 2.39.2