From b368b13240f582f6b66164ff6d99cfaccc17c711 Mon Sep 17 00:00:00 2001 From: Jacob Alexander Date: Sat, 26 Jan 2013 04:34:33 -0500 Subject: [PATCH] Updating CMake build system to prepare for Teensy 3 integration. - Tested with the AVR builds - Partially tested with basic ARM test builds --- CMakeLists.txt | 129 +++++++++++-------------------------------------- arm.cmake | 111 ++++++++++++++++++++++++++++++++++++++++++ avr.cmake | 111 ++++++++++++++++++++++++++++++++++++++++++ buildall.bash | 2 +- setup.cmake | 6 +-- 5 files changed, 253 insertions(+), 106 deletions(-) create mode 100644 arm.cmake create mode 100644 avr.cmake diff --git a/CMakeLists.txt b/CMakeLists.txt index 06aaeb6..8f51c8a 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -1,6 +1,6 @@ ###| CMAKE Kiibohd Controller |### # -# Written by Jacob Alexander in 2011 for the Kiibohd Controller +# Jacob Alexander 2011-2013 # Due to this file's usefulness: # # Released into the Public Domain @@ -11,15 +11,30 @@ set( CMAKE_LEGACY_CYGWIN_WIN32 0 ) set( CMAKE_USE_RELATIVE_PATHS 1 ) +#| Add Dependency Macro +include( AddFileDependencies ) -#| Set the Compilers (must be set first) -include( CMakeForceCompiler ) -cmake_force_c_compiler ( avr-gcc AVRCCompiler ) -cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler ) -#| Add Dependency Macro -include( AddFileDependencies ) +### +# Compiler Family +# + +#| Specify the compiler family to use +#| Currently only supports AVR and ARM +#| "avr" # Teensy 1.0 +#| "avr" # Teensy 2.0 +#| "avr" # Teensy++ 1.0 +#| "avr" # Teensy++ 2.0 +#| "arm" # Teensy 3.0 +#set( COMPILER_FAMILY "arm" ) +set( COMPILER_FAMILY "avr" ) + + + +#| Load the compiler family specific configurations +include( ${COMPILER_FAMILY}.cmake ) + ### @@ -49,6 +64,7 @@ cmake_minimum_required( VERSION 2.8 ) include( setup.cmake ) set( SRCS main.c + ${COMPILER_SRCS} ${SCAN_SRCS} ${MACRO_SRCS} ${USB_SRCS} @@ -57,89 +73,6 @@ set( SRCS -### -# Atmel Defines and Linker Options -# - -#| MCU Name -#| You _MUST_ set this to match the board you are using -#| type "make clean" after changing this, so all files will be rebuilt -#| -#| "at90usb162" # Teensy 1.0 -#| "atmega32u4" # Teensy 2.0 -#| "at90usb646" # Teensy++ 1.0 -#| "at90usb1286" # Teensy++ 2.0 -#set( MCU "atmega32u4" ) -set( MCU "at90usb1286" ) - - -#| Compiler flag to set the C Standard level. -#| c89 = "ANSI" C -#| gnu89 = c89 plus GCC extensions -#| c99 = ISO C99 standard (not yet fully implemented) -#| gnu99 = c99 plus GCC extensions -set( CSTANDARD "-std=gnu99" ) - - -#| Warning Options -#| -Wall...: warning level -set( WARN "-Wall -Wstrict-prototypes" ) - - -#| Tuning Options -#| -f...: tuning, see GCC manual and avr-libc documentation -set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" ) - - -#| Optimization level, can be [0, 1, 2, 3, s]. -#| 0 = turn off optimization. s = optimize for size. -#| (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -set( OPT "s" ) - - -#| Output Format -#| srec, ihex, binary -set( FORMAT "ihex" ) - - -#| Processor frequency. -#| Normally the first thing your program should do is set the clock prescaler, -#| so your program will run at the correct speed. You should also set this -#| variable to same clock speed. The _delay_ms() macro uses this, and many -#| examples use this variable to calculate timings. Do not add a "UL" here. -set( F_CPU "16000000" ) - - -#| Dependency Files -#| Compiler flags to generate dependency files. -set( GENDEPFLAGS "-MMD -MP" ) - - -#| Listing file -set( TARGET_LST ${TARGET}.lst ) - - -#| Compiler Flags -add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" ) - - -#| Linker Flags -set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" ) - - -#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...) -set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature ) - - -#| Eep Flags -set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} ) - - -#| Lss Flags -set( LSS_FLAGS -h -S -z ) - - - ### # Build Targets # @@ -159,23 +92,15 @@ set_target_properties( ${TARGET_ELF} PROPERTIES #| Convert the .ELF into a .HEX to load onto the Teensy set( TARGET_HEX ${TARGET}.hex ) add_custom_command( TARGET ${TARGET_ELF} POST_BUILD - COMMAND avr-objcopy ${HEX_FLAGS} ${TARGET_ELF} ${TARGET_HEX} + COMMAND ${OBJCOPY} ${HEX_FLAGS} ${TARGET_ELF} ${TARGET_HEX} COMMENT "Creating load file for Flash: ${TARGET_HEX}" ) -#| Convert the .ELF into a .EEP -set( TARGET_EEP ${TARGET}.eep ) -add_custom_command( TARGET ${TARGET_ELF} POST_BUILD - COMMAND avr-objcopy ${EEP_FLAGS} ${TARGET_ELF} ${TARGET_EEP} - COMMENT "Creating load file for EEPROM: ${TARGET_EEP}" -) - - #| Generate the Extended .LSS set( TARGET_LSS ${TARGET}.lss ) add_custom_command( TARGET ${TARGET_ELF} POST_BUILD - COMMAND avr-objdump ${LSS_FLAGS} ${TARGET_ELF} > ${TARGET_LSS} + COMMAND ${OBJDUMP} ${LSS_FLAGS} ${TARGET_ELF} > ${TARGET_LSS} COMMENT "Creating Extended Listing: ${TARGET_LSS}" ) @@ -183,7 +108,7 @@ add_custom_command( TARGET ${TARGET_ELF} POST_BUILD #| Generate the Symbol Table .SYM set( TARGET_SYM ${TARGET}.sym ) add_custom_command( TARGET ${TARGET_ELF} POST_BUILD - COMMAND avr-nm -n ${TARGET_ELF} > ${TARGET_SYM} + COMMAND ${NM} -n ${TARGET_ELF} > ${TARGET_SYM} COMMENT "Creating Symbol Table: ${TARGET_SYM}" ) @@ -194,7 +119,7 @@ add_custom_command( TARGET ${TARGET_ELF} POST_BUILD # #| After Changes Size Information -add_custom_target( SizeAfter ALL avr-size --target=${FORMAT} ${TARGET_HEX} ${TARGET_ELF} +add_custom_target( SizeAfter ALL ${SIZE} --target=${FORMAT} ${TARGET_HEX} ${TARGET_ELF} DEPENDS ${TARGET_ELF} COMMENT "Size after generation:" ) diff --git a/arm.cmake b/arm.cmake new file mode 100644 index 0000000..1b6a8ce --- /dev/null +++ b/arm.cmake @@ -0,0 +1,111 @@ +###| CMAKE Kiibohd Controller |### +# +# Jacob Alexander 2011-2013 +# Due to this file's usefulness: +# +# Released into the Public Domain +# +# Freescale ARM CMake Build Configuration +# +### + + + +#| Set the Compilers (must be set first) +include( CMakeForceCompiler ) +cmake_force_c_compiler ( arm-none-eabi-gcc AVRCCompiler ) +cmake_force_cxx_compiler( arm-none-eabi-g++ AVRCxxCompiler ) + + +#| Compiler Binaries +set( OBJCOPY "arm-none-eabi-objcopy" ) +set( OBJDUMP "arm-none-eabi-objdump" ) +set( NM "arm-none-eabi-nm" ) +set( SIZE "arm-none-eabi-size" ) + + + +### +# ARM Defines and Linker Options +# + +#| Chip Name (Linker) +#| You _MUST_ set this to match the board you are using +#| type "make clean" after changing this, so all files will be rebuilt +#| +#| "mk20dx128" # Teensy 3.0 +set( CHIP "mk20dx128" ) + + +#| CPU Type +#| You _MUST_ set this to match the board you are using +#| type "make clean" after changing this, so all files will be rebuilt +#| +#| "cortex-m4" # Teensy 3.0 +set( CPU "cortex-m4" ) + + +#| Extra Compiler Sources +#| Mostly for convenience functions like interrupt handlers +set( COMPILER_SRCS + Lib/${CHIP}.c +) + + +#| Compiler flag to set the C Standard level. +#| c89 = "ANSI" C +#| gnu89 = c89 plus GCC extensions +#| c99 = ISO C99 standard (not yet fully implemented) +#| gnu99 = c99 plus GCC extensions +set( CSTANDARD "-std=gnu99" ) + + +#| Warning Options +#| -Wall...: warning level +set( WARN "-Wall -g" ) + + +#| Tuning Options +#| -f...: tuning, see GCC manual +set( TUNING "-mthumb -nostdlib" ) + + +#| Optimization level, can be [0, 1, 2, 3, s]. +#| 0 = turn off optimization. s = optimize for size. +#| (Note: 3 is not always the best optimization level.) +set( OPT "s" ) + + +#| Output Format +#| srec, ihex, binary +set( FORMAT "ihex" ) + + +#| Processor frequency. +#| Normally the first thing your program should do is set the clock prescaler, +#| so your program will run at the correct speed. You should also set this +#| variable to same clock speed. The _delay_ms() macro uses this, and many +#| examples use this variable to calculate timings. Do not add a "UL" here. +set( F_CPU "48000000" ) + + +#| Dependency Files +#| Compiler flags to generate dependency files. +set( GENDEPFLAGS "-MMD" ) + + +#| Compiler Flags +add_definitions( "-mcpu=${CPU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" ) + + +#| Linker Flags +set( LINKER_FLAGS "-mcpu=${CPU} -Wl,-Map=${TARGET}.map,--cref -Wl,--gc-sections -mthumb -T${CMAKE_CURRENT_SOURCE_DIR}/Lib/${CHIP}.ld" ) + + +#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...) +set( HEX_FLAGS -O ${FORMAT} -R .eeprom ) + + +#| Lss Flags +set( LSS_FLAGS -h -S -z ) + diff --git a/avr.cmake b/avr.cmake new file mode 100644 index 0000000..7b0a178 --- /dev/null +++ b/avr.cmake @@ -0,0 +1,111 @@ +###| CMAKE Kiibohd Controller |### +# +# Jacob Alexander 2011-2013 +# Due to this file's usefulness: +# +# Released into the Public Domain +# +# avr-gcc CMake Build Configuration +# +### + + + +#| Set the Compilers (must be set first) +include( CMakeForceCompiler ) +cmake_force_c_compiler ( avr-gcc AVRCCompiler ) +cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler ) + + +#| Compiler Binaries +set( OBJCOPY "avr-objcopy" ) +set( OBJDUMP "avr-objdump" ) +set( NM "avr-nm" ) +set( SIZE "avr-size" ) + + + +### +# Atmel Defines and Linker Options +# + +#| MCU Name +#| You _MUST_ set this to match the board you are using +#| type "make clean" after changing this, so all files will be rebuilt +#| +#| "at90usb162" # Teensy 1.0 +#| "atmega32u4" # Teensy 2.0 +#| "at90usb646" # Teensy++ 1.0 +#| "at90usb1286" # Teensy++ 2.0 +#set( MCU "atmega32u4" ) +set( MCU "at90usb1286" ) + + +#| Extra Compiler Sources +#| Mostly for convenience functions like interrupt handlers +set( COMPILER_SRCS + # XXX Not needed for avr-gcc +) + + +#| Compiler flag to set the C Standard level. +#| c89 = "ANSI" C +#| gnu89 = c89 plus GCC extensions +#| c99 = ISO C99 standard (not yet fully implemented) +#| gnu99 = c99 plus GCC extensions +set( CSTANDARD "-std=gnu99" ) + + +#| Warning Options +#| -Wall...: warning level +set( WARN "-Wall -Wstrict-prototypes" ) + + +#| Tuning Options +#| -f...: tuning, see GCC manual and avr-libc documentation +set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" ) + + +#| Optimization level, can be [0, 1, 2, 3, s]. +#| 0 = turn off optimization. s = optimize for size. +#| (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +set( OPT "s" ) + + +#| Output Format +#| srec, ihex, binary +set( FORMAT "ihex" ) + + +#| Processor frequency. +#| Normally the first thing your program should do is set the clock prescaler, +#| so your program will run at the correct speed. You should also set this +#| variable to same clock speed. The _delay_ms() macro uses this, and many +#| examples use this variable to calculate timings. Do not add a "UL" here. +set( F_CPU "16000000" ) + + +#| Dependency Files +#| Compiler flags to generate dependency files. +set( GENDEPFLAGS "-MMD -MP" ) + + +#| Compiler Flags +add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" ) + + +#| Linker Flags +set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" ) + + +#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...) +set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature ) + + +#| Eep Flags +set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} ) + + +#| Lss Flags +set( LSS_FLAGS -h -S -z ) + diff --git a/buildall.bash b/buildall.bash index 410460f..8f24726 100755 --- a/buildall.bash +++ b/buildall.bash @@ -40,7 +40,7 @@ main() { cmake -DScanModuleOverride=$module ../.. && make || let failCount++ # Cleanup, for the next build - cd - + cd - > /dev/null done totalModules=$(echo $scanModules | wc -w) diff --git a/setup.cmake b/setup.cmake index 79ede57..b56c581 100644 --- a/setup.cmake +++ b/setup.cmake @@ -37,9 +37,9 @@ set( DebugModule "full" ) ### # Module Overrides (Used in the buildall.bash script) # -if ( EXISTS ${PROJECT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) +if ( ( DEFINED ${ScanModuleOverride} ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) ) set( ScanModule ${ScanModuleOverride} ) -endif ( EXISTS ${PROJECT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) +endif ( ( DEFINED ${ScanModuleOverride} ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) ) @@ -52,7 +52,7 @@ set( USBModulePath "USB/${USBModule}" ) set( DebugModulePath "Debug/${DebugModule}" ) #| Top-level directory adjustment -set( HEAD_DIR "${PROJECT_SOURCE_DIR}" ) +set( HEAD_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ) -- 2.39.2