From 6ee96952b905451f90dca628a53e0fd3f02061de Mon Sep 17 00:00:00 2001
From: fred <fred>
Date: Tue, 26 Mar 2002 22:48:14 +0000
Subject: [PATCH] lilypond-1.2.7

---
 Documentation/ntweb/index.yo | 227 --------------------------------
 input/bugs/choral.ly         | 243 -----------------------------------
 stepmake/bin/text2html.sh    |  17 ---
 3 files changed, 487 deletions(-)
 delete mode 100644 Documentation/ntweb/index.yo
 delete mode 100644 input/bugs/choral.ly
 delete mode 100644 stepmake/bin/text2html.sh

diff --git a/Documentation/ntweb/index.yo b/Documentation/ntweb/index.yo
deleted file mode 100644
index e785f72b8f..0000000000
--- a/Documentation/ntweb/index.yo
+++ /dev/null
@@ -1,227 +0,0 @@
-mailto(daboys@austin.rr.com)
-article(LilyPond Windows NT 4.0/95 Distribution)(nemail(Jeffrey B. Reed)(daboys@austin.rr.com))(label(contents))
-sect(Windows NT/95 Binary Distribution)
-
-subsect(Introduction) label(introduction)
-
-This page is dedicated to the distribution of precompiled and
-preformatted LilyPond binaries for Windows NT 4.0 .  This package is
-covered under the GNU General Public License and all of the source is
-available on the official 
-url(LilyPond Homepage)(http://www.cs.ruu.nl/people/hanwen/lilypond/index.html).
-A full set of url(documentation)(http://www.cs.ruu.nl/people/hanwen/lilypond/Documentation/tex/out-www/index.html) in various formats is also available.
-
-includefile(../BLURB.in)
-
-link(Back to top)(contents)
-clearpage()
-
-subsect(NEWS) label(news)
-
-description(
- dit(BUG FIXES)
-  itemize(
-   it() os.rename(this.__base + '.' + str(os.getpid()) + '.dvi', outfile) nl()
-        os.error: (2, 'No such file or directory') nl()
-        This problem was reported by many and thoroughly debugged by
-	Wolf Lother.  We have abandoned the use of os.getpid(), which
-	for one reason or another resulted in negative numbers on
-	windows 95, in favor of the tempfile module.  We have also
-        attempted to use only one '.' in naming temporary files.
-  )
-)
-
-description(
- dit(NOTES)
-  itemize(  
-   it() We have had preliminary reports that the Windows 95
-        installation works on Windows 98.  Many thanks to Christian
-        Mondrup. 
-
-   it() Please use the Add/Remove program control panel entry to
-        unistall your current version of Lilypond before you attempt to
-	install this one.
-
-   it() If you are upgrading from a previous version of lilypond you will most
-	likely need to flush your font cache.  I generally just toss
-	file(D:\localtexmf\fonts\tfm\public\ehrhardt) and
-	file(D:\localtexmf\fonts\pk\ljfour\public\ehrhardt) in the Recyle
-	Bin. Your local font directory may be different, please refer to your
-	local installation of code(TeX).
-
-   it() The FAT16, FAT32, and NTFS file system problems have been
-	corrected.  I have tested various installations that are known
-	to be operational.  
-  ) 
-)
-  
-The installer was created with
-url(CreateInstall)(http://www.gentee.com/).  This is a shareware
-application that has capabilities close to the high dollar installers
-bf(InstallShield), bf(Install Vise), and bf(WiseInstaller).
-bf(CreateInstall) does cost $38 to register which is probably going to
-be frowned upon, but I was unable to find a freeware install builder
-that was suitable.  The self extracting distribution currently:
-
-itemize(
- it() Installs the lilypond distribution on any valid file system.
- it() Optionally creates a em(Lilypond) shortcut group on your start
-      menu with the following shortcuts.
-  itemize(
-   it() bf(lilyshell)
-   it() bf(uninstall)
-  )
- it() Allows unistall through the Add/Remove Program interface on the
-      control panel.
- it() The bf(lilyshell) uses the /E and /K switches to extend the
-      environment size and initialize the shell environment.
- it() It has the look and feel of a real Windows installer
-)
-
-The bf(lilyshell) shortcut initializes the environment so you can
-generate music from a MSDOS prompt with commands like:
-
-itemize(
-    it()ly2dvi
-    it()convert-mudela
-    it()mudela-book
-    it()lilypond
-    it()midi2ly
-)
-
-This release has been tested on Windows NT 4.0sp3 and Windows 95 and
-found to be operational.  If you have any troubles and or comments
-please do not hesitate to drop me a line 
-url(Jeffrey B. Reed)(mailto:daboys@austin.rr.com).
-
-This is what the version @TOPLEVEL_VERSION@ brings:
-
-verb(
-top_of_NEWS
-)
-
-link(Back to top)(contents)
-clearpage()
-
-subsect(BUGS) label(news)
-itemize(
-
-  it() Using any text that contains '{}' for the value of the any
-       valid mudela bf(header) construct will cause bf(ly2dvi) to
-       fail.  A work around for the bf(latexheaders) construct is to
-       create a bf(TeX) file and set bf(latexheaders) to "\input
-       foo.tex". 
-)
-
-link(Back to top)(contents)
-clearpage()
-
-subsect(Required Packages) label(packages)
-
-LilyPond uses the code(TeX) package as its rendering engine. code(TeX)
-represents the state-of-the-art in computer typesetting. It is used to
-generate documentation, article, and book quality output. It is an
-assume tool to have in your toolbox.
-
-LilyPond uses a code(Python) script named code(ly2dvi) to render a
-professional quality music score. code(Python) is an interpreted,
-interactive, object-oriented programming language.  It is often
-compared to code(Tcl), code(Perl), code(Scheme) or code(Java).
-
-Gsview is used to display and print the music scores created by
-LilyPond.
-
-itemize(
-    it()url(code(MiKTeX))(http://www.snafu.de/~cschenk/miktex/). Versions
-        1.10b, 1.11, and 1.20b are known to work.
-    it()url(code(Python))(http://www.python.org). Version 1.5.1 and
-	possibly 1.5 work.
-    it()url(code(gsview))(http://www.cs.wisc.edu/~ghost/gsview/index.html). 
-	Version 5.10 is known to work.
-)
-
-link(Back to top)(contents)
-clearpage()
-
-
-subsect(Download) label(download)
-
-itemize(
-    it()Windows 95
-        url(lilypond-@TOPLEVEL_VERSION@-95)(lilypond-@TOPLEVEL_VERSION@-95.exe)
-    it()Windows NT 4.0
-        url(lilypond-@TOPLEVEL_VERSION@-nt)(lilypond-@TOPLEVEL_VERSION@-nt.exe)
-)
-
-link(Back to top)(contents)
-clearpage()
-
-
-subsect(Installation) label(installation)
-
-itemize(
-  it()link(Download)(download) the distribution.
-  it()run downloaded executable. nl()
-  it() The first installation of LilyPond also requires these
-        additional steps:
-     description(
-       dit(LaTeX geometry package)
-       itemize(
-         it()url(download)(ftp://ctan.tug.org/tex-archive/macros/latex/contrib/supported/geometry.zip) the zip file to code(\Temp).
-         it()Extract the zip file into the LaTeX package area of
-             code(MiKTeX). This will be bf(em(MiKTeX-dir)\tex\latex)
-         it()From a Command Prompt change directory into geometry
-             directory that was just extracted.
-         it()In the geometry directory type bf(latex geometry.ins)
-       ) nl()
-       dit(Miscellaneous fonts)
-       itemize(
-         it()In your favorite editor create a file named
-             code(cmbx14.mf). Add the following lines: nl()
-             bf(design_size=14.4; ) nl()
-             bf(input b-cmbx;)
-         it()From a Command Prompt copy cmbx14.mf to the public font
-             area of MiKTeX: nl()
-             bf(copy cmbx14.mf em(MiKTeX-dir)\fonts\source\public\cm\base)
-        )
-	dit(NOTE) 
-	MiKTeX-1.11 localtexmf configurations should use
-        bf(em(localtexmf-dir)) in place of bf(em(MiKTeX-dir)).
-      ) nl()
-  it()See the link(Running)(running) instructions below
-)
-
-link(Back to top)(contents)
-clearpage()
-
-
-subsect(Running LilyPond) label(running)
-
-itemize(
-  it()Take a look at url(angels.ly)(angels.ly)
-  it()Save angels.ly to your local disk
-  it()Select the bf(lilyshell) shortcut from the em(Lilypond) group nl()
-  it() From a LilyPond Command Prompt run: nl()
-  bf(ly2dvi angels.ly) nl()
-  bf(dvips angels.dvi) nl()
-  bf(start angels.ps) nl()
-)
-
-link(Back to top)(contents)
-clearpage()
-
-subsect(LilyPond resources) label(resources)
-
-itemize(
-  it()url(LilyPond Homepage)
-	(http://www.cs.ruu.nl/people/hanwen/lilypond/index.html)
-  it()url(LilyPond Ftp Site)(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/)
-  it()url(gnu-music-discuss mail archive)
-	(http://jab.org/mail/gnu-music-discuss@gnu.org/)
-  it()Please feel free to mail us at url(gnu-music-discuss)
-	(mailto:gnu-music-discuss@gnu.org)
-)
-
-link(Back to top)(contents)
-clearpage()
-
diff --git a/input/bugs/choral.ly b/input/bugs/choral.ly
deleted file mode 100644
index 178c5ce0fa..0000000000
--- a/input/bugs/choral.ly
+++ /dev/null
@@ -1,243 +0,0 @@
-
-\include "deutsch.ly"
-
-global = \notes {
-	\time 2/2; \partial 2*1;
-	\key g;
-
-	s2 | s1 | s1 |
-	\time 3/2;
-	s1. | s1. |
-	\time 2/2;
-	s1 | s1 | s1 | s2
-
-	s2 | s1 | s1 |
-	\time 3/2;
-	s1. | s1. |
-	\time 2/2;
-	s1 | s1
-	\time 3/2;
-	s1. \bar "||";
-
-	s1. | s1. | s1. | s1. |
-	s1. | s1. | s1. | s1. \bar "||";
-
-	\key es;
-	s1. | s1. | s1. | s1. |
-	s1. | s1. | s1. | s1 \bar "||";
-
-	\key g;
-	s2 |
-	\time 2/2;
-	s1 | s1 |
-	\time 3/2;
-	s1. | s1. |
-	\time 2/2;
-	s1 | s1 | s1 | s2
-
-	s2 | s1 | s1 |
-	\time 3/2;
-	s1. | s1. |
-	\time 2/2;
-	s1 | s1 | s1 \bar "|.";
-}
-
-themeMelody = \notes \relative c'' {
-	g2 | g d' | h a |
-	g fis g | a ~ a \breathe b |
-	d b | a a | g ~ g ~ | g \breathe
-
-	g2 | g d' | h a |
-	g fis g | a ~ a \breathe b |
-	d b |
-}
-
-themeBeforeBreak1EndMelody = \notes \relative  c'' {
-	 a2 a | g ~ g ~ g4 r4
-}
-
-themeFinalEndMelody = \notes \relative  c'' {
-	 a2 a ~ | a1^\fermata
-}
-
-themeRightHand = \notes \relative c' {
-	d2 | c <e g> | <e g> <d fis> | d2 es es4 c4 |
-	<d1 e1> <d2 f2> | <g2 b2> f2 | <cis2 e2> <e2 g2> |
-	<d2 f2> <c4 f4> cis4 | <dis2 fis2>
-
-	<c2 e2> | <c e> <e g> | <e g> <d fis> | d2 es es4 c4 |
-	<d1 e1> <d2 f2> | <g2 b2> f2 |
-}
-
-themeBeforeBreak1EndRightHand = \notes \relative c' {
-	 <cis2 e2> <e2 g2> | <d2 f2> <c4 f4> cis4 <dis4 fis4> r4 |
-}
-
-themeFinalEndRightHand = \notes \relative c' {
-	 <cis2 e2> <e2 g2> | <d1 f1>
-}
-
-themeLeftHand =	\notes \relative c {
-	< \context Voice = one { \stemup
-		h'2 | h c | cis c | a4 c c2 b4 a ~ | a1 \breathe
-		b2 | e d | h cis | b a | h \breathe
-
-		g | a c | cis c | a4 c c2 b4 a ~ | a1 \breathe
-		b2 | e d |
-	  }
-          \context Voice = two { \stemdown
-		<d,2 g> | <f a> g ~ | g c | g a g | <a,1 fis'>
-		<d2 g> | <g b> <f a> | a a | g a | h
-
-		g | g g ~ | g c | g a g | <a,1 fis'>
-		<d2 g> | <g b> <f a> |
-	  }
-	>
-}
-
-themeBeforeBreak1EndLeftHand = \notes \relative c' {
-	 <a2 h2> <a2 cis2> | <g2 b2> a2 h4 r4 |
-}
-
-themeFinalEndLeftHand = \notes \relative c' {
-	 <a2 h2> <a2 cis2> | <g1 b1>
-}
-
-themePedal = \notes \relative c' {
-	g4 fis | f2 c | a' d, |
-	h c es | d ~ d \breathe b |
-	e, g | a a | d, f4 a | h2 \breathe
-
-	c2 | e2 c | a' d, |
-	h c es | d ~ d \breathe b |
-	e, g |
-}
-
-themeBeforeBreak1EndPedal = \notes \relative c {
-	a2 a | d,2 f4 a h4 r4 |
-}
-
-themeFinalEndPedal = \notes \relative c {
-	a2 a | d,1_\fermata
-}
-
-break1Melody = \notes \relative c'' {
-	g4( fis e fis d' h | )a1. |
-	g4( es g b es g | <fis1. )a1.> |
-	b,2 g es | d1. |
-	b'2 g d' | a1 r2 |
-}
-
-break1RightHand = \notes \relative c' {
-	e1. | g4( fis e fis g fis |
-	)es1. | dis'2 d4 c b a \breathe |
-	s1. | s1. |
-	es1 <es2 g2> | <dis1 fis1 > r2 |
-}
-
-break1LeftHand = \notes \relative c {
-	<
-		\context Voice = oben {
-			\stemup
-			c'1. | d2. c4 h a | b1. | d1. |
-		}
-		\context Voice = unten {
-			\stemdown
-			<c,1. g'1.> | <d1. a'1.> | <es1. g1.> | d2. e4 fis d |
-		}
-	>
-	r4 b2( g4 b c | d c b g fis d |
-	<)es1 c'1> <c2 c'2> | <h1 h'1> r2 |
-}
-
-break2RightHand = \notes \relative c'' {
-	g8 r8 c,8 r8 <fis8 g8> r8 c r g' r c, r |
-	<fis8 g8> r  c r  b' r  es, r  <es g> r  es  r |
-	b' r es, r <es g> r es r d' r <d, g> r |
-	d' r f, r <f b> r f r d' r <fis, a> r |
-	d' r g, r <g b> r g r d' r g, r |
-	es' r g, r <g b> r g b es r <a, c> r |
-	d8 r b r d8 f d b a4-. <a-. cis-.> |
-	<fis1 a d1> \breathe
-}
-
-break2LeftHand = \notes \relative c' {
-	r8 g r g r g r g r g r g |
-	r8 g r g r b r b r b r b |
-	r c r c r c r c r h r h |
-	r d r d r d r d r d r d |
-	r d r d r d r d r c r c |
-	r <b es> r <b es> r <b es> r <g es'> r f' r <a, f'> |
-	r <b f'> r <b f'> r4 <g4-. f'-.> <a4-. e'-.> <a-. e'-.> |
-	<d,1 d'1> \breathe
-}
-
-break2Pedal = \notes \relative c {
-	c2 c g' | es1 d2 | c1 h2 |
-	b1 d2 \breathe | g2 g f2 | es1 f2 |
-	b,2 g a | d1 \breathe
-}
-
-\score {
-	<
-		\context PianoStaff <
-			\property PianoStaff.instrument = "Manual"
-			\context Staff = treble <
-				\global
-				\context Voice = melody {
-					\stemup \themeMelody \themeBeforeBreak1EndMelody
-					\break1Melody
-					\stemboth \break2RightHand
-					\stemup \themeMelody \themeFinalEndMelody
-				}
-				\context Voice = righthand {
-					\stemdown \themeRightHand \themeBeforeBreak1EndRightHand
-					\break1RightHand
-					\notes {
-						s1. | s1. | s1. | s1. |
-						s1. | s1. | s1. | s1
-					}
-					\themeRightHand \themeFinalEndRightHand
-				}
-			>
-			\context Staff = bass <
-				\clef "bass";
-				\global
-				\context Voice = lefthand {
-					\themeLeftHand \themeBeforeBreak1EndLeftHand
-					\break1LeftHand
-					\break2LeftHand
-					\themeLeftHand \themeFinalEndLeftHand
-				}
-			>
-		>
-		\context Staff = pedal {
-			\property Staff.instrument = "Pedal"
-			\clef "bass";
-			<
-				\global
-				\context Voice = pedal {
-					\themePedal \themeBeforeBreak1EndPedal
-					\notes {
-						R1. R1. R1. R1. R1. R1. R1. R1.
-					}
-					\break2Pedal
-					\themePedal \themeFinalEndPedal
-				}
-			>
-		}
-	>
-
-	\header {
-		tagline = "";
-	}
-
-	\paper {
-		linewidth = 18.8 \cm;
-		textheight = 28.0 \cm;
-
-		\translator { \OrchestralScoreContext }
-%		\translator { \StaffContext \consists "Staff_margin_engraver"; }
-%		\translator { \PianoStaffContext \consists "Staff_margin_engraver"; }
-	}
-}
diff --git a/stepmake/bin/text2html.sh b/stepmake/bin/text2html.sh
deleted file mode 100644
index 0547aaeb8d..0000000000
--- a/stepmake/bin/text2html.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-# text2html.sh
-
-if [ $# -ne 2 ]; then
-	echo "Usage: text2html TEXT-FILE HTML-FILENAME"
-	exit 2
-fi
-
-infile=$1
-outfile=$2
-rm -f $outfile
-echo "<body>" > $outfile
-echo "<xmp>" >> $outfile
-cat $infile >> $outfile
-echo "</xmp>" >> $outfile
-echo "</body>" >> $outfile
-
-- 
2.39.5