From: Michael Zoech <michi.zoech@gmail.com>
Date: Fri, 20 Jul 2018 16:01:35 +0000 (-0700)
Subject: Keyboard: adding Sentraq S65-Plus (#3406)
X-Git-Url: https://git.donarmstrong.com/?a=commitdiff_plain;h=c50e80e13be5e34505f38eab31374ed2cee31da4;p=qmk_firmware.git
Keyboard: adding Sentraq S65-Plus (#3406)
* New keyboard 'Sentraq S65-Plus'
* Change ANSI_KEYMAP to LAYOUT_ansi
* Use QMK_KEYBOARD_H as include
---
diff --git a/keyboards/s65_plus/config.h b/keyboards/s65_plus/config.h
new file mode 100644
index 000000000..df60e60a8
--- /dev/null
+++ b/keyboards/s65_plus/config.h
@@ -0,0 +1,55 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT S65-PLUS
+#define DESCRIPTION q.m.k. keyboard firmware for S65-PLUS
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Sentraq
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 18
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, E6, B0, B1, D5, B2, B3, D0, D1, D2, D4, D6, D7, F7 }
+#define UNUSED_PINS
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#endif
diff --git a/keyboards/s65_plus/keymaps/default/keymap.c b/keyboards/s65_plus/keymaps/default/keymap.c
new file mode 100644
index 000000000..04f6926de
--- /dev/null
+++ b/keyboards/s65_plus/keymaps/default/keymap.c
@@ -0,0 +1,53 @@
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _AL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: Main layer
+ * âââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ
+ * â F1 â F2 â ESC â 1 â 2 â 3 â 4 â 5 â 6 â 7 â 8 â 9 â 0 â - â = âââââââBKSPCâ DEL â
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â F3 â F4 â TAB âââââââ Q â W â E â R â T â Y â U â I â O â P â [ â ] â \ âPG_UPâ
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â F5 â F6 âCAPSLâââââââ A â S â D â F â G â H â J â K â L â ; â ' âââââââENTERâPG_DNâ
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â F7 â F8 âââââââLSHFTâ Z â X â C â V â B â N â M â , â . â / âââââââRSHFTâ UP â END â
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â F9 â F10 âLCTRLâL_GUIâL_ALTâââââââââââââââââââ SPC âââââââââââââââââââR_ALTâ FN0 âRCTL âLEFT âDOWN âRIGHTâ
+ * âââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ
+ */
+
+ /* 0: ANSI qwerty */
+ [_BL] = LAYOUT_ansi(
+ KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \
+ KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
+ KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
+ KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \
+ KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_AL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+
+ /* 1: LED layer
+ * âââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ¬ââââââ
+ * â â âRESETâ â â â â â â â â â â â âââââââBLTOGâBLSTPâ
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â â â âââââââ â â â â â â â â â â â â â â
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â â â âââââââ â â â â â â â â â â âââââââ â â
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â â âââââââ âUGTOGâUGMODâUGHUIâUGHUDâUGSAIâUGSADâUGVAIâUGVADâ â âââââââ âVOLU â â
+ * âââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¼ââââââ¤
+ * â â â â â âââââââââââââââââââ âââââââââââââââââââ â â âPREV âVOLD âNEXT â
+ * âââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ´ââââââ
+ */
+
+ [_AL] = LAYOUT_ansi(
+ KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_STEP, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/s65_plus/readme.md b/keyboards/s65_plus/readme.md
new file mode 100644
index 000000000..426a6612d
--- /dev/null
+++ b/keyboards/s65_plus/readme.md
@@ -0,0 +1,14 @@
+S65-PLUS
+=====
+
+DIY 65% keyboard from Sentraq.
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: S65-PLUS PCB
+Hardware Availability: https://sentraq.com/collections/kits/products/s65-plus-diy-keyboard-kit
+
+Make example for this keyboard (after setting up your build environment):
+
+ make s65_plus:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/s65_plus/rules.mk b/keyboards/s65_plus/rules.mk
new file mode 100644
index 000000000..08dd2d93c
--- /dev/null
+++ b/keyboards/s65_plus/rules.mk
@@ -0,0 +1,66 @@
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable RGB light
diff --git a/keyboards/s65_plus/s65_plus.c b/keyboards/s65_plus/s65_plus.c
new file mode 100644
index 000000000..3eaaa3717
--- /dev/null
+++ b/keyboards/s65_plus/s65_plus.c
@@ -0,0 +1,24 @@
+#include "s65_plus.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTB &= ~(1<<7);
+ } else {
+ // Turn capslock off
+ PORTB |= (1<<7);
+ }
+}
diff --git a/keyboards/s65_plus/s65_plus.h b/keyboards/s65_plus/s65_plus.h
new file mode 100644
index 000000000..2ff445f6c
--- /dev/null
+++ b/keyboards/s65_plus/s65_plus.h
@@ -0,0 +1,23 @@
+#ifndef S60PLUS_H
+#define S60PLUS_H
+
+#include "quantum.h"
+
+#define LAYOUT_ansi( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K016, K017, \
+ K100, K101, K102, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, \
+ K200, K201, K202, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216, K217, \
+ K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, K316, K317, \
+ K400, K401, K402, K403, K404, K408, K412, K413, K414, K415, K416, K417 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, KC_NO, K016, K017 }, \
+ { K100, K101, K102, KC_NO, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117 }, \
+ { K200, K201, K202, KC_NO, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, KC_NO, K216, K217 }, \
+ { K300, K301, KC_NO, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315, K316, K317 }, \
+ { K400, K401, K402, K403, K404, KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, K412, K413, K414, K415, K416, K417 } \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif