From: ai03 <sarcaphx510@gmail.com>
Date: Mon, 11 Mar 2019 02:57:36 +0000 (-0700)
Subject: [Keyboard] Add Orbit keyboard (#5306)
X-Git-Url: https://git.donarmstrong.com/?a=commitdiff_plain;h=9bea41c9b239916ae8786e7df02c29fad79ef459;p=qmk_firmware.git

[Keyboard] Add Orbit keyboard (#5306)

* Get things working except indicators

* Attempt to get things working

* hmm

* Compiles but doesn't run

* Make data transfer work

* Get all indicators working

* Remove old transport

* Prepare for pullreq

* Revert keymap from testing to production

* Final error checking for pull request

* Remove autogenerated is_command from config.h

* Rewrite pin toggles using qmk functions
---

diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
new file mode 100644
index 000000000..f4dc4fd63
--- /dev/null
+++ b/keyboards/ai03/orbit/config.h
@@ -0,0 +1,249 @@
+/*
+Copyright 2018 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0003
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    ai03 Keyboard Designs
+#define PRODUCT         Orbit
+#define DESCRIPTION     Split ergonomic keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 10 // Double rows for split keyboards. Orbit has 5, so define 10
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D3 }
+#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 }
+#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 }
+#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 }
+
+#define SPLIT_HAND_PIN D5
+
+//#define USE_I2C
+
+#define SELECT_SOFT_SERIAL_SPEED 1
+
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ai03/orbit/info.json b/keyboards/ai03/orbit/info.json
new file mode 100644
index 000000000..e69de29bb
diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c
new file mode 100644
index 000000000..4c8c39fb0
--- /dev/null
+++ b/keyboards/ai03/orbit/keymaps/default/keymap.c
@@ -0,0 +1,91 @@
+/* Copyright 2018 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  MANUAL = SAFE_RANGE,
+  DBLZERO
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT( /* Base */
+		TO(1),   KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_BSPC, \
+		TO(1),   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_RBRC, KC_BSLS, \
+		KC_NO,   KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
+		KC_NO,   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_PSCR, KC_DEL,  \
+			     KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_GRV,  KC_MENU, KC_MINS, KC_EQL 
+	),
+	[1] = LAYOUT( /* Fn, Arrowkeys, Media control, Backlight */
+		TO(2),   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_VOLU, _______, \
+		TO(2),   _______, _______, KC_PGUP, _______, _______, KC_F11,  KC_F12,  _______, KC_UP,   _______, _______, KC_VOLD, BL_STEP, \
+		TO(0),   _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MPLY, _______, \
+		TO(0),   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,  \
+			     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+	),
+	[2] = LAYOUT( /* Mousekeys and Numpad */
+		KC_NO,   _______, _______, _______, _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_PSLS, _______, _______, \
+		KC_NO,   _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PAST, _______, _______, \
+		TO(1),   _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PMNS, _______, _______, \
+		TO(1),   _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_BTN3, _______, DBLZERO, KC_P0,   KC_PDOT, KC_PENT, KC_PPLS, _______, MANUAL,  \
+			     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+	)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case MANUAL:
+			if (record->event.pressed) 
+			{
+				// Keypress
+				SEND_STRING("https://kb.ai03.me/redir/orbit");
+			} 
+			else 
+			{
+				// Key release
+			}
+			break;
+		case DBLZERO:
+			if (record->event.pressed) 
+			{
+				// Keypress
+				SEND_STRING("00");
+			} 
+			else 
+			{
+				// Key release
+			}
+			break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+		
+	return state;
+}
diff --git a/keyboards/ai03/orbit/keymaps/default/readme.md b/keyboards/ai03/orbit/keymaps/default/readme.md
new file mode 100644
index 000000000..63c528abf
--- /dev/null
+++ b/keyboards/ai03/orbit/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for Orbit
+
+[KLE of layout](http://www.keyboard-layout-editor.com/#/gists/53ebf59524de12515cb7e2e6de94f0d6)
\ No newline at end of file
diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c
new file mode 100644
index 000000000..a1509666c
--- /dev/null
+++ b/keyboards/ai03/orbit/matrix.c
@@ -0,0 +1,328 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "config.h"
+#include "split_flags.h"
+#include "quantum.h"
+#include "debounce.h"
+#include "transport.h"
+
+#if (MATRIX_COLS <= 8)
+#  define print_matrix_header() print("\nr/c 01234567\n")
+#  define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+#  define matrix_bitpop(i) bitpop(matrix[i])
+#  define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#  define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
+#  define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
+#  define matrix_bitpop(i) bitpop16(matrix[i])
+#  define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#  define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#  define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
+#  define matrix_bitpop(i) bitpop32(matrix[i])
+#  define ROW_SHIFTER ((uint32_t)1)
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+//#define ROWS_PER_HAND (MATRIX_ROWS / 2)
+
+#ifdef DIRECT_PINS
+static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
+#else
+static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t raw_matrix[ROWS_PER_HAND];
+
+// row offsets for each hand
+uint8_t thisHand, thatHand;
+
+// user-defined overridable functions
+
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
+
+__attribute__((weak)) void matrix_slave_scan_user(void) {}
+
+// helper functions
+
+inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
+
+inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
+
+bool matrix_is_modified(void) {
+  if (debounce_active()) return false;
+  return true;
+}
+
+inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
+
+inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
+
+void matrix_print(void) {
+  print_matrix_header();
+
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    phex(row);
+    print(": ");
+    print_matrix_row(row);
+    print("\n");
+  }
+}
+
+uint8_t matrix_key_count(void) {
+  uint8_t count = 0;
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    count += matrix_bitpop(i);
+  }
+  return count;
+}
+
+// matrix code
+
+#ifdef DIRECT_PINS
+
+static void init_pins(void) {
+  for (int row = 0; row < MATRIX_ROWS; row++) {
+    for (int col = 0; col < MATRIX_COLS; col++) {
+      pin_t pin = direct_pins[row][col];
+      if (pin != NO_PIN) {
+        setPinInputHigh(pin);
+      }
+    }
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+  matrix_row_t last_row_value = current_matrix[current_row];
+  current_matrix[current_row] = 0;
+
+  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+    pin_t pin = direct_pins[current_row][col_index];
+    if (pin != NO_PIN) {
+      current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
+    }
+  }
+
+  return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == COL2ROW)
+
+static void select_row(uint8_t row) {
+  setPinOutput(row_pins[row]);
+  writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
+
+static void unselect_rows(void) {
+  for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+    setPinInputHigh(row_pins[x]);
+  }
+}
+
+static void init_pins(void) {
+  unselect_rows();
+  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+    setPinInputHigh(col_pins[x]);
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+  // Store last value of row prior to reading
+  matrix_row_t last_row_value = current_matrix[current_row];
+
+  // Clear data in matrix row
+  current_matrix[current_row] = 0;
+
+  // Select row and wait for row selecton to stabilize
+  select_row(current_row);
+  wait_us(30);
+
+  // For each col...
+  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+    // Populate the matrix row with the state of the col pin
+    current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index);
+  }
+
+  // Unselect row
+  unselect_row(current_row);
+
+  return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void select_col(uint8_t col) {
+  setPinOutput(col_pins[col]);
+  writePinLow(col_pins[col]);
+}
+
+static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
+
+static void unselect_cols(void) {
+  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+    setPinInputHigh(col_pins[x]);
+  }
+}
+
+static void init_pins(void) {
+  unselect_cols();
+  for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+    setPinInputHigh(row_pins[x]);
+  }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
+  bool matrix_changed = false;
+
+  // Select col and wait for col selecton to stabilize
+  select_col(current_col);
+  wait_us(30);
+
+  // For each row...
+  for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[row_index];
+
+    // Check row pin state
+    if (readPin(row_pins[row_index])) {
+      // Pin HI, clear col bit
+      current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+    } else {
+      // Pin LO, set col bit
+      current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+    }
+
+    // Determine if the matrix changed state
+    if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
+      matrix_changed = true;
+    }
+  }
+
+  // Unselect col
+  unselect_col(current_col);
+
+  return matrix_changed;
+}
+
+#endif
+
+void matrix_init(void) {
+  debug_enable = true;
+  debug_matrix = true;
+  debug_mouse  = true;
+
+  // Set pinout for right half if pinout for that half is defined
+  if (!isLeftHand) {
+#ifdef MATRIX_ROW_PINS_RIGHT
+    const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+      row_pins[i] = row_pins_right[i];
+    }
+#endif
+#ifdef MATRIX_COL_PINS_RIGHT
+    const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
+    for (uint8_t i = 0; i < MATRIX_COLS; i++) {
+      col_pins[i] = col_pins_right[i];
+    }
+#endif
+  }
+
+  thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
+  thatHand = ROWS_PER_HAND - thisHand;
+
+  // initialize key pins
+  init_pins();
+
+  // initialize matrix state: all keys off
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    matrix[i] = 0;
+  }
+
+  debounce_init(ROWS_PER_HAND);
+
+  matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void) {
+  bool changed = false;
+
+#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
+  // Set row, read cols
+  for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+    changed |= read_cols_on_row(raw_matrix, current_row);
+  }
+#elif (DIODE_DIRECTION == ROW2COL)
+  // Set col, read rows
+  for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+    changed |= read_rows_on_col(raw_matrix, current_col);
+  }
+#endif
+
+  debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
+
+  return 1;
+}
+
+uint8_t matrix_scan(void) {
+  uint8_t ret = _matrix_scan();
+
+  if (is_keyboard_master()) {
+    static uint8_t error_count;
+
+    if (!transport_master(matrix + thatHand)) {
+      error_count++;
+
+      if (error_count > ERROR_DISCONNECT_COUNT) {
+        // reset other half if disconnected
+        for (int i = 0; i < ROWS_PER_HAND; ++i) {
+          matrix[thatHand + i] = 0;
+        }
+      }
+    } else {
+      error_count = 0;
+    }
+
+    matrix_scan_quantum();
+  } else {
+    transport_slave(matrix + thisHand);
+    matrix_slave_scan_user();
+  }
+
+  return ret;
+}
diff --git a/keyboards/ai03/orbit/matrix.h b/keyboards/ai03/orbit/matrix.h
new file mode 100644
index 000000000..c2bdd3098
--- /dev/null
+++ b/keyboards/ai03/orbit/matrix.h
@@ -0,0 +1,3 @@
+#pragma once
+
+#include <common/matrix.h>
diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c
new file mode 100644
index 000000000..2f149875b
--- /dev/null
+++ b/keyboards/ai03/orbit/orbit.c
@@ -0,0 +1,228 @@
+/* Copyright 2018 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "orbit.h"
+#include "split_util.h"
+#include "transport.h"
+
+
+// Call led_toggle to set LEDs easily
+// LED IDs:
+// 
+// (LEFT) 0 1 2   |   3 4 5 (RIGHT)
+
+void led_toggle(int id, bool on) {
+	
+	if (isLeftHand) {
+		switch(id) {
+			case 0:
+				// Left hand C6
+				if (on)
+					//PORTC |= (1<<6);
+					writePinHigh(C6);
+				else
+					//PORTC &= ~(1<<6);
+					writePinLow(C6);
+				break;
+			case 1:
+				// Left hand B6
+				if (on)
+					//PORTB |= (1<<6);
+					writePinHigh(B6);
+				else
+					//PORTB &= ~(1<<6);
+					writePinLow(B6);
+				break;
+			case 2:
+				// Left hand B5
+				if (on)
+					//PORTB |= (1<<5);
+					writePinHigh(B5);
+				else
+					//PORTB &= ~(1<<5);
+					writePinLow(B5);
+				break;
+			default:
+				break;
+		}
+	} else {
+		switch(id) {
+			case 3:
+				// Right hand F6
+				if (on)
+					//PORTF |= (1<<6);
+					writePinHigh(F6);
+				else
+					//PORTF &= ~(1<<6);
+					writePinLow(F6);
+				break;
+			case 4:
+				// Right hand F7
+				if (on)
+					//PORTF |= (1<<7);
+					writePinHigh(F7);
+				else
+					//PORTF &= ~(1<<7);
+					writePinLow(F7);
+				break;
+			case 5:
+				// Right hand C7
+				if (on)
+					//PORTC |= (1<<7);
+					writePinHigh(C7);
+				else
+					//PORTC &= ~(1<<7);
+					writePinLow(C7);
+				break;
+			default:
+				break;
+		}
+	}
+}
+
+// Set all LEDs at once using an array of 6 booleans
+// LED IDs:
+// 
+// (LEFT) 0 1 2   |   3 4 5 (RIGHT)
+// 
+// Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand
+
+void set_all_leds(bool leds[6]) {
+	for (int i = 0; i < 6; i++) {
+		led_toggle(i, leds[i]);
+	}
+}
+
+void set_layer_indicators(uint8_t layer) {
+	
+	switch (layer)
+	{
+		case 0:
+			led_toggle(0, true);
+			led_toggle(1, false);
+			led_toggle(2, false);
+			break;
+		case 1:
+			led_toggle(0, true);
+			led_toggle(1, true);
+			led_toggle(2, false);
+			break;
+		case 2:
+			led_toggle(0, true);
+			led_toggle(1, true);
+			led_toggle(2, true);
+			break;
+		case 3:
+			led_toggle(0, false);
+			led_toggle(1, true);
+			led_toggle(2, true);
+			break;
+		case 4:
+			led_toggle(0, false);
+			led_toggle(1, false);
+			led_toggle(2, true);
+			break;
+		default:
+			led_toggle(0, true);
+			led_toggle(1, false);
+			led_toggle(2, true);
+			break;
+	}
+	
+}
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	
+	// Initialize indicator LEDs to output
+	if (isLeftHand)
+	{
+		setPinOutput(C6);
+		setPinOutput(B6);
+		setPinOutput(B5);
+		//DDRC |= (1<<6);
+		//DDRB |= (1<<6);
+		//DDRB |= (1<<5);
+	}
+	else
+	{
+		setPinOutput(F6);
+		setPinOutput(F7);
+		setPinOutput(C7);
+		//DDRF |= (1<<6);
+		//DDRF |= (1<<7);
+		//DDRC |= (1<<7);
+	}
+
+	set_layer_indicators(0);
+	
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	
+	if (is_keyboard_master()) {
+	
+		serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK);
+		serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK);
+		serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK);
+
+		led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK));
+		led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK));
+		led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK));
+		
+	}
+
+	led_set_user(usb_led);
+}
+
+uint32_t layer_state_set_kb(uint32_t state) {
+	
+	if (is_keyboard_master())
+	{
+		
+		current_layer = biton32(state);
+		serial_m2s_buffer.current_layer = biton32(state);
+		
+		// If left half, do the LED toggle thing
+		if (isLeftHand)
+		{
+			set_layer_indicators(biton32(state));
+		}
+		
+	}
+	// NOTE: Do not set slave LEDs here.
+	// This is not called on slave
+	
+	return layer_state_set_user(state);
+}
+
+
diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h
new file mode 100644
index 000000000..211b9ebca
--- /dev/null
+++ b/keyboards/ai03/orbit/orbit.h
@@ -0,0 +1,65 @@
+/* Copyright 2018 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ORBIT_H
+#define ORBIT_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+ 
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+  #include <avr/io.h>
+  #include <avr/interrupt.h>
+#endif
+#endif
+
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
+         L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45 \
+) \
+{ \
+	{ L00,   L01,   L02,   L03,   L04,   L05,   L06 }, \
+	{ L10,   L11,   L12,   L13,   L14,   L15,   L16 }, \
+	{ L20,   L21,   L22,   L23,   L24,   L25,   L26 }, \
+	{ L30,   L31,   L32,   L33,   L34,   L35,   L36 }, \
+	{ KC_NO, L41,   L42,   L43,   L44,   L45,   L46 }, \
+	{ R00,   R01,   R02,   R03,   R04,   R05,   R06 }, \
+	{ R10,   R11,   R12,   R13,   R14,   R15,   R16 }, \
+	{ R20,   R21,   R22,   R23,   R24,   R25,   R26 }, \
+	{ R30,   R31,   R32,   R33,   R34,   R35,   R36 }, \
+	{ R40,   R41,   R42,   R43,   R44,   R45, KC_NO }  \
+}
+
+uint8_t current_layer;
+
+extern void led_toggle(int id, bool on);
+void set_all_leds(bool leds[6]);
+extern void set_layer_indicators(uint8_t layer);
+
+#endif
diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md
new file mode 100644
index 000000000..58ba2079d
--- /dev/null
+++ b/keyboards/ai03/orbit/readme.md
@@ -0,0 +1,15 @@
+# Orbit
+
+![Orbit](https://raw.githubusercontent.com/ai03-2725/Orbit/master/Images/PCB-R2.0.jpg) 
+
+A split ergonomic keyboard project.  
+
+Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
+Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit)  
+Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed.  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/orbit:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk
new file mode 100644
index 000000000..4b40e47cb
--- /dev/null
+++ b/keyboards/ai03/orbit/rules.mk
@@ -0,0 +1,92 @@
+SRC += split_util.c \
+	   split_flags.c \
+	   serial.c \
+	   transport.c \
+	   matrix.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+USE_I2C = no                # I2C for split communication
+CUSTOM_MATRIX = yes			# For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
+# SPLIT_KEYBOARD = yes		# Split keyboard flag disabled as manual edits had to be done to the split common files
+
+
diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c
new file mode 100644
index 000000000..1315377a3
--- /dev/null
+++ b/keyboards/ai03/orbit/serial.c
@@ -0,0 +1,546 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ *
+ * 2018-10-28 checked
+ *  avr-gcc 4.9.2
+ *  avr-gcc 5.4.0
+ *  avr-gcc 7.3.0
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include "serial.h"
+//#include <pro_micro.h>
+
+#ifdef SOFT_SERIAL_PIN
+
+#ifdef __AVR_ATmega32U4__
+  // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
+  #ifdef USE_AVR_I2C
+    #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
+      #error Using ATmega32U4 I2C, so can not use PD0, PD1
+    #endif
+  #endif
+
+  #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
+    #define SERIAL_PIN_DDR   DDRD
+    #define SERIAL_PIN_PORT  PORTD
+    #define SERIAL_PIN_INPUT PIND
+    #if SOFT_SERIAL_PIN == D0
+      #define SERIAL_PIN_MASK _BV(PD0)
+      #define EIMSK_BIT       _BV(INT0)
+      #define EICRx_BIT       (~(_BV(ISC00) | _BV(ISC01)))
+      #define SERIAL_PIN_INTERRUPT INT0_vect
+    #elif  SOFT_SERIAL_PIN == D1
+      #define SERIAL_PIN_MASK _BV(PD1)
+      #define EIMSK_BIT       _BV(INT1)
+      #define EICRx_BIT       (~(_BV(ISC10) | _BV(ISC11)))
+      #define SERIAL_PIN_INTERRUPT INT1_vect
+    #elif  SOFT_SERIAL_PIN == D2
+      #define SERIAL_PIN_MASK _BV(PD2)
+      #define EIMSK_BIT       _BV(INT2)
+      #define EICRx_BIT       (~(_BV(ISC20) | _BV(ISC21)))
+      #define SERIAL_PIN_INTERRUPT INT2_vect
+    #elif  SOFT_SERIAL_PIN == D3
+      #define SERIAL_PIN_MASK _BV(PD3)
+      #define EIMSK_BIT       _BV(INT3)
+      #define EICRx_BIT       (~(_BV(ISC30) | _BV(ISC31)))
+      #define SERIAL_PIN_INTERRUPT INT3_vect
+    #endif
+  #elif  SOFT_SERIAL_PIN == E6
+    #define SERIAL_PIN_DDR   DDRE
+    #define SERIAL_PIN_PORT  PORTE
+    #define SERIAL_PIN_INPUT PINE
+    #define SERIAL_PIN_MASK  _BV(PE6)
+    #define EIMSK_BIT        _BV(INT6)
+    #define EICRx_BIT        (~(_BV(ISC60) | _BV(ISC61)))
+    #define SERIAL_PIN_INTERRUPT INT6_vect
+  #else
+  #error invalid SOFT_SERIAL_PIN value
+  #endif
+
+#else
+ #error serial.c now support ATmega32U4 only
+#endif
+
+#define ALWAYS_INLINE __attribute__((always_inline))
+#define NO_INLINE __attribute__((noinline))
+#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
+
+// parity check
+#define ODD_PARITY 1
+#define EVEN_PARITY 0
+#define PARITY EVEN_PARITY
+
+#ifdef SERIAL_DELAY
+  // custom setup in config.h
+  // #define TID_SEND_ADJUST 2
+  // #define SERIAL_DELAY 6             // micro sec
+  // #define READ_WRITE_START_ADJUST 30 // cycles
+  // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
+#else
+// ============ Standard setups ============
+
+#ifndef SELECT_SOFT_SERIAL_SPEED
+#define SELECT_SOFT_SERIAL_SPEED 1
+//  0: about 189kbps (Experimental only)
+//  1: about 137kbps (default)
+//  2: about 75kbps
+//  3: about 39kbps
+//  4: about 26kbps
+//  5: about 20kbps
+#endif
+
+#if __GNUC__ < 6
+  #define TID_SEND_ADJUST 14
+#else
+  #define TID_SEND_ADJUST 2
+#endif
+
+#if SELECT_SOFT_SERIAL_SPEED == 0
+  // Very High speed
+  #define SERIAL_DELAY 4             // micro sec
+  #if __GNUC__ < 6
+    #define READ_WRITE_START_ADJUST 33 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_START_ADJUST 34 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+  // High speed
+  #define SERIAL_DELAY 6             // micro sec
+  #if __GNUC__ < 6
+    #define READ_WRITE_START_ADJUST 30 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_START_ADJUST 33 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+  // Middle speed
+  #define SERIAL_DELAY 12            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+  // Low speed
+  #define SERIAL_DELAY 24            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+  // Very Low speed
+  #define SERIAL_DELAY 36            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+  // Ultra Low speed
+  #define SERIAL_DELAY 48            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#else
+#error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif /* SELECT_SOFT_SERIAL_SPEED */
+#endif /* SERIAL_DELAY */
+
+#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
+#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
+
+#define SLAVE_INT_WIDTH_US 1
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+#else
+  #define SLAVE_INT_ACK_WIDTH_UNIT 2
+  #define SLAVE_INT_ACK_WIDTH 4
+#endif
+
+static SSTD_t *Transaction_table = NULL;
+static uint8_t Transaction_table_size = 0;
+
+inline static void serial_delay(void) ALWAYS_INLINE;
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static void serial_delay_half1(void) ALWAYS_INLINE;
+inline static
+void serial_delay_half1(void) {
+  _delay_us(SERIAL_DELAY_HALF1);
+}
+
+inline static void serial_delay_half2(void) ALWAYS_INLINE;
+inline static
+void serial_delay_half2(void) {
+  _delay_us(SERIAL_DELAY_HALF2);
+}
+
+inline static void serial_output(void) ALWAYS_INLINE;
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
+inline static
+void serial_input_with_pullup(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static void serial_low(void) ALWAYS_INLINE;
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static void serial_high(void) ALWAYS_INLINE;
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
+{
+    Transaction_table = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+    serial_output();
+    serial_high();
+}
+
+void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
+{
+    Transaction_table = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+    serial_input_with_pullup();
+
+    // Enable INT0-INT3,INT6
+    EIMSK |= EIMSK_BIT;
+#if SERIAL_PIN_MASK == _BV(PE6)
+    // Trigger on falling edge of INT6
+    EICRB &= EICRx_BIT;
+#else
+    // Trigger on falling edge of INT0-INT3
+    EICRA &= EICRx_BIT;
+#endif
+}
+
+// Used by the sender to synchronize timing with the reciver.
+static void sync_recv(void) NO_INLINE;
+static
+void sync_recv(void) {
+  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
+  }
+  // This shouldn't hang if the target disconnects because the
+  // serial line will float to high if the target does disconnect.
+  while (!serial_read_pin());
+}
+
+// Used by the reciver to send a synchronization signal to the sender.
+static void sync_send(void) NO_INLINE;
+static
+void sync_send(void) {
+  serial_low();
+  serial_delay();
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
+    uint8_t byte, i, p, pb;
+
+  _delay_sub_us(READ_WRITE_START_ADJUST);
+  for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
+      serial_delay_half1();   // read the middle of pulses
+      if( serial_read_pin() ) {
+          byte = (byte << 1) | 1; p ^= 1;
+      } else {
+          byte = (byte << 1) | 0; p ^= 0;
+      }
+      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+      serial_delay_half2();
+  }
+  /* recive parity bit */
+  serial_delay_half1();   // read the middle of pulses
+  pb = serial_read_pin();
+  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+  serial_delay_half2();
+
+  *pterrcount += (p != pb)? 1 : 0;
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
+void serial_write_chunk(uint8_t data, uint8_t bit) {
+    uint8_t b, p;
+    for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
+        if(data & b) {
+            serial_high(); p ^= 1;
+        } else {
+            serial_low();  p ^= 0;
+        }
+        serial_delay();
+    }
+    /* send parity bit */
+    if(p & 1) { serial_high(); }
+    else      { serial_low(); }
+    serial_delay();
+
+    serial_low(); // sync_send() / senc_recv() need raise edge
+}
+
+static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+void serial_send_packet(uint8_t *buffer, uint8_t size) {
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    data = buffer[i];
+    sync_send();
+    serial_write_chunk(data,8);
+  }
+}
+
+static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
+  uint8_t pecount = 0;
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    sync_recv();
+    data = serial_read_chunk(&pecount, 8);
+    buffer[i] = data;
+  }
+  return pecount == 0;
+}
+
+inline static
+void change_sender2reciver(void) {
+    sync_send();          //0
+    serial_delay_half1(); //1
+    serial_low();         //2
+    serial_input_with_pullup(); //2
+    serial_delay_half1(); //3
+}
+
+inline static
+void change_reciver2sender(void) {
+    sync_recv();     //0
+    serial_delay();  //1
+    serial_low();    //3
+    serial_output(); //3
+    serial_delay_half1(); //4
+}
+
+static inline uint8_t nibble_bits_count(uint8_t bits)
+{
+    bits = (bits & 0x5) + (bits >> 1 & 0x5);
+    bits = (bits & 0x3) + (bits >> 2 & 0x3);
+    return bits;
+}
+
+// interrupt handle to be used by the target device
+ISR(SERIAL_PIN_INTERRUPT) {
+
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  serial_low();
+  serial_output();
+  SSTD_t *trans = Transaction_table;
+#else
+  // recive transaction table index
+  uint8_t tid, bits;
+  uint8_t pecount = 0;
+  sync_recv();
+  bits = serial_read_chunk(&pecount,7);
+  tid = bits>>3;
+  bits = (bits&7) != nibble_bits_count(tid);
+  if( bits || pecount> 0 || tid > Transaction_table_size ) {
+      return;
+  }
+  serial_delay_half1();
+
+  serial_high(); // response step1 low->high
+  serial_output();
+  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
+  SSTD_t *trans = &Transaction_table[tid];
+  serial_low(); // response step2 ack high->low
+#endif
+
+  // target send phase
+  if( trans->target2initiator_buffer_size > 0 )
+      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
+                         trans->target2initiator_buffer_size);
+  // target switch to input
+  change_sender2reciver();
+
+  // target recive phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
+                               trans->initiator2target_buffer_size) ) {
+          *trans->status = TRANSACTION_ACCEPTED;
+      } else {
+          *trans->status = TRANSACTION_DATA_ERROR;
+      }
+  } else {
+      *trans->status = TRANSACTION_ACCEPTED;
+  }
+
+  sync_recv(); //weit initiator output to high
+}
+
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
+//
+// Returns:
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+// this code is very time dependent, so we need to disable interrupts
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void) {
+  SSTD_t *trans = Transaction_table;
+#else
+int  soft_serial_transaction(int sstd_index) {
+  if( sstd_index > Transaction_table_size )
+      return TRANSACTION_TYPE_ERROR;
+  SSTD_t *trans = &Transaction_table[sstd_index];
+#endif
+  cli();
+
+  // signal to the target that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(SLAVE_INT_WIDTH_US);
+
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  // wait for the target response
+  serial_input_with_pullup();
+  _delay_us(SLAVE_INT_RESPONSE_TIME);
+
+  // check if the target is present
+  if (serial_read_pin()) {
+    // target failed to pull the line low, assume not present
+    serial_output();
+    serial_high();
+    *trans->status = TRANSACTION_NO_RESPONSE;
+    sei();
+    return TRANSACTION_NO_RESPONSE;
+  }
+
+#else
+  // send transaction table index
+  int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
+  sync_send();
+  _delay_sub_us(TID_SEND_ADJUST);
+  serial_write_chunk(tid, 7);
+  serial_delay_half1();
+
+  // wait for the target response (step1 low->high)
+  serial_input_with_pullup();
+  while( !serial_read_pin() ) {
+      _delay_sub_us(2);
+  }
+
+  // check if the target is present (step2 high->low)
+  for( int i = 0; serial_read_pin(); i++ ) {
+      if (i > SLAVE_INT_ACK_WIDTH + 1) {
+          // slave failed to pull the line low, assume not present
+          serial_output();
+          serial_high();
+          *trans->status = TRANSACTION_NO_RESPONSE;
+          sei();
+          return TRANSACTION_NO_RESPONSE;
+      }
+      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
+  }
+#endif
+
+  // initiator recive phase
+  // if the target is present syncronize with it
+  if( trans->target2initiator_buffer_size > 0 ) {
+      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
+                                trans->target2initiator_buffer_size) ) {
+          serial_output();
+          serial_high();
+          *trans->status = TRANSACTION_DATA_ERROR;
+          sei();
+          return TRANSACTION_DATA_ERROR;
+      }
+   }
+
+  // initiator switch to output
+  change_reciver2sender();
+
+  // initiator send phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
+                         trans->initiator2target_buffer_size);
+  }
+
+  // always, release the line when not in use
+  sync_send();
+
+  *trans->status = TRANSACTION_END;
+  sei();
+  return TRANSACTION_END;
+}
+
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_get_and_clean_status(int sstd_index) {
+    SSTD_t *trans = &Transaction_table[sstd_index];
+    cli();
+    int retval = *trans->status;
+    *trans->status = 0;;
+    sei();
+    return retval;
+}
+#endif
+
+#endif
+
+// Helix serial.c history
+//   2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
+//   2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
+//             (adjusted with avr-gcc 4.9.2)
+//   2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
+//             (adjusted with avr-gcc 4.9.2)
+//   2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
+//             (adjusted with avr-gcc 4.9.2)
+//   2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
+//             (adjusted with avr-gcc 7.3.0)
+//   2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
+//             (adjusted with avr-gcc 5.4.0, 7.3.0)
+//   2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)
diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h
new file mode 100644
index 000000000..1c1e64006
--- /dev/null
+++ b/keyboards/ai03/orbit/serial.h
@@ -0,0 +1,62 @@
+#pragma once
+
+#include <stdbool.h>
+
+// /////////////////////////////////////////////////////////////////
+// Need Soft Serial defines in config.h
+// /////////////////////////////////////////////////////////////////
+// ex.
+//  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
+//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
+//                                               //  1: about 137kbps (default)
+//                                               //  2: about 75kbps
+//                                               //  3: about 39kbps
+//                                               //  4: about 26kbps
+//                                               //  5: about 20kbps
+//
+// //// USE simple API (using signle-type transaction function)
+//   /* nothing */
+// //// USE flexible API (using multi-type transaction function)
+//   #define SERIAL_USE_MULTI_TRANSACTION
+//
+// /////////////////////////////////////////////////////////////////
+
+// Soft Serial Transaction Descriptor
+typedef struct _SSTD_t  {
+    uint8_t *status;
+    uint8_t initiator2target_buffer_size;
+    uint8_t *initiator2target_buffer;
+    uint8_t target2initiator_buffer_size;
+    uint8_t *target2initiator_buffer;
+} SSTD_t;
+#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
+
+// initiator is transaction start side
+void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
+// target is interrupt accept side
+void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
+
+// initiator resullt
+#define TRANSACTION_END 0
+#define TRANSACTION_NO_RESPONSE 0x1
+#define TRANSACTION_DATA_ERROR  0x2
+#define TRANSACTION_TYPE_ERROR  0x4
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void);
+#else
+int  soft_serial_transaction(int sstd_index);
+#endif
+
+// target status
+// *SSTD_t.status has
+//   initiator:
+//       TRANSACTION_END
+//    or TRANSACTION_NO_RESPONSE
+//    or TRANSACTION_DATA_ERROR
+//   target:
+//       TRANSACTION_DATA_ERROR
+//    or TRANSACTION_ACCEPTED
+#define TRANSACTION_ACCEPTED 0x8
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_get_and_clean_status(int sstd_index);
+#endif
diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c
new file mode 100644
index 000000000..1f5825d65
--- /dev/null
+++ b/keyboards/ai03/orbit/split_flags.c
@@ -0,0 +1,5 @@
+#include "split_flags.h"
+
+volatile bool RGB_DIRTY = false;
+
+volatile bool BACKLIT_DIRTY = false;
\ No newline at end of file
diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h
new file mode 100644
index 000000000..aaac474a7
--- /dev/null
+++ b/keyboards/ai03/orbit/split_flags.h
@@ -0,0 +1,15 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdint.h>
+
+/**
+* Global Flags
+**/
+
+//RGB Stuff
+extern volatile bool RGB_DIRTY;
+
+
+//Backlight Stuff
+extern volatile bool BACKLIT_DIRTY;
diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c
new file mode 100644
index 000000000..5095cb8fd
--- /dev/null
+++ b/keyboards/ai03/orbit/split_util.c
@@ -0,0 +1,87 @@
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+#include "split_flags.h"
+#include "transport.h"
+#include "quantum.h"
+
+#ifdef EE_HANDS
+#   include "tmk_core/common/eeprom.h"
+#   include "eeconfig.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+__attribute__((weak))
+bool is_keyboard_left(void) {
+  #ifdef SPLIT_HAND_PIN
+    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
+    setPinInput(SPLIT_HAND_PIN);
+    return readPin(SPLIT_HAND_PIN);
+  #else
+    #ifdef EE_HANDS
+      return eeprom_read_byte(EECONFIG_HANDEDNESS);
+    #else
+      #ifdef MASTER_RIGHT
+        return !is_keyboard_master();
+      #else
+        return is_keyboard_master();
+      #endif
+    #endif
+  #endif
+}
+
+bool is_keyboard_master(void)
+{
+#ifdef __AVR__
+  static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
+
+  // only check once, as this is called often
+  if (usbstate == UNKNOWN)
+  {
+    USBCON |= (1 << OTGPADE);  // enables VBUS pad
+    wait_us(5);
+
+    usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE;  // checks state of VBUS
+  }
+
+  return (usbstate == MASTER);
+#else
+  return true;
+#endif
+}
+
+static void keyboard_master_setup(void) {
+#if defined(USE_I2C) || defined(EH)
+  #ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+  #endif
+#endif
+  transport_master_init();
+
+  // For master the Backlight info needs to be sent on startup
+  // Otherwise the salve won't start with the proper info until an update
+  BACKLIT_DIRTY = true;
+}
+
+static void keyboard_slave_setup(void)
+{
+  transport_slave_init();
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void)
+{
+  isLeftHand = is_keyboard_left();
+
+  if (is_keyboard_master())
+  {
+    keyboard_master_setup();
+  }
+  else
+  {
+    keyboard_slave_setup();
+  }
+}
diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h
new file mode 100644
index 000000000..20f7535bf
--- /dev/null
+++ b/keyboards/ai03/orbit/split_util.h
@@ -0,0 +1,10 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+extern volatile bool isLeftHand;
+
+void matrix_master_OLED_init (void);
diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c
new file mode 100644
index 000000000..adedf2432
--- /dev/null
+++ b/keyboards/ai03/orbit/transport.c
@@ -0,0 +1,238 @@
+
+#include "transport.h"
+
+#include "config.h"
+#include "matrix.h"
+#include "quantum.h"
+
+#include "orbit.h"
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+#ifdef RGBLIGHT_ENABLE
+#   include "rgblight.h"
+#endif
+
+#ifdef BACKLIGHT_ENABLE
+# include "backlight.h"
+  extern backlight_config_t backlight_config;
+#endif
+
+#if defined(USE_I2C) || defined(EH)
+
+#include "i2c.h"
+
+#ifndef SLAVE_I2C_ADDRESS
+#  define SLAVE_I2C_ADDRESS           0x32
+#endif
+
+#if (MATRIX_COLS > 8)
+#  error "Currently only supports 8 COLS"
+#endif
+
+// Get rows from other half over i2c
+bool transport_master(matrix_row_t matrix[]) {
+  int err = 0;
+
+  // write backlight info
+#ifdef BACKLIGHT_ENABLE
+  if (BACKLIT_DIRTY) {
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) { goto i2c_error; }
+
+    // Backlight location
+    err = i2c_master_write(I2C_BACKLIT_START);
+    if (err) { goto i2c_error; }
+
+    // Write backlight
+    i2c_master_write(get_backlight_level());
+
+    BACKLIT_DIRTY = false;
+  }
+#endif
+
+  err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+  if (err) { goto i2c_error; }
+
+  // start of matrix stored at I2C_KEYMAP_START
+  err = i2c_master_write(I2C_KEYMAP_START);
+  if (err) { goto i2c_error; }
+
+  // Start read
+  err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+  if (err) { goto i2c_error; }
+
+  if (!err) {
+    int i;
+    for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+      matrix[i] = i2c_master_read(I2C_ACK);
+    }
+    matrix[i] = i2c_master_read(I2C_NACK);
+    i2c_master_stop();
+  } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+    i2c_reset_state();
+    return false;
+  }
+
+#ifdef RGBLIGHT_ENABLE
+  if (RGB_DIRTY) {
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) { goto i2c_error; }
+
+    // RGB Location
+    err = i2c_master_write(I2C_RGB_START);
+    if (err) { goto i2c_error; }
+
+    uint32_t dword = eeconfig_read_rgblight();
+
+    // Write RGB
+    err = i2c_master_write_data(&dword, 4);
+    if (err) { goto i2c_error; }
+
+    RGB_DIRTY = false;
+    i2c_master_stop();
+  }
+#endif
+
+  return true;
+}
+
+void transport_slave(matrix_row_t matrix[]) {
+
+  for (int i = 0; i < ROWS_PER_HAND; ++i)
+  {
+    i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i];
+  }
+  // Read Backlight Info
+  #ifdef BACKLIGHT_ENABLE
+  if (BACKLIT_DIRTY)
+  {
+    backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
+    BACKLIT_DIRTY = false;
+  }
+  #endif
+  #ifdef RGBLIGHT_ENABLE
+  if (RGB_DIRTY)
+  {
+    // Disable interupts (RGB data is big)
+    cli();
+    // Create new DWORD for RGB data
+    uint32_t dword;
+
+    // Fill the new DWORD with the data that was sent over
+    uint8_t * dword_dat = (uint8_t *)(&dword);
+    for (int i = 0; i < 4; i++)
+    {
+      dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i];
+    }
+
+    // Update the RGB now with the new data and set RGB_DIRTY to false
+    rgblight_update_dword(dword);
+    RGB_DIRTY = false;
+    // Re-enable interupts now that RGB is set
+    sei();
+  }
+  #endif
+}
+
+void transport_master_init(void) {
+  i2c_master_init();
+}
+
+void transport_slave_init(void) {
+  i2c_slave_init(SLAVE_I2C_ADDRESS);
+}
+
+#else // USE_SERIAL
+
+#include "serial.h"
+
+
+
+volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
+volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
+uint8_t volatile status0 = 0;
+
+SSTD_t transactions[] = {
+  { (uint8_t *)&status0,
+    sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
+    sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
+  }
+};
+
+uint8_t slave_layer_cache;
+uint8_t slave_nlock_cache;
+uint8_t slave_clock_cache;
+uint8_t slave_slock_cache;
+
+void transport_master_init(void)
+{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
+
+void transport_slave_init(void)
+{ 
+	soft_serial_target_init(transactions, TID_LIMIT(transactions)); 
+	slave_layer_cache = 255;
+	slave_nlock_cache = 255;
+	slave_clock_cache = 255;
+	slave_slock_cache = 255;
+}
+
+bool transport_master(matrix_row_t matrix[]) {
+
+  if (soft_serial_transaction()) {
+    return false;
+  }
+
+  // TODO:  if MATRIX_COLS > 8 change to unpack()
+  for (int i = 0; i < ROWS_PER_HAND; ++i) {
+    matrix[i] = serial_s2m_buffer.smatrix[i];
+  }
+
+  #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    // Code to send RGB over serial goes here (not implemented yet)
+  #endif
+
+  #ifdef BACKLIGHT_ENABLE
+    // Write backlight level for slave to read
+    serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
+  #endif
+
+  return true;
+}
+
+void transport_slave(matrix_row_t matrix[]) {
+
+  // TODO: if MATRIX_COLS > 8 change to pack()
+  for (int i = 0; i < ROWS_PER_HAND; ++i)
+  {
+    serial_s2m_buffer.smatrix[i] = matrix[i];
+  }
+  #ifdef BACKLIGHT_ENABLE
+    backlight_set(serial_m2s_buffer.backlight_level);
+  #endif
+  #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+  // Add serial implementation for RGB here
+  #endif
+  
+  if (slave_layer_cache != serial_m2s_buffer.current_layer) {  
+	slave_layer_cache = serial_m2s_buffer.current_layer;
+	set_layer_indicators(slave_layer_cache);
+  }
+  
+  if (slave_nlock_cache != serial_m2s_buffer.nlock_led) {
+	slave_nlock_cache = serial_m2s_buffer.nlock_led;
+	led_toggle(3, slave_nlock_cache);
+  }
+  if (slave_clock_cache != serial_m2s_buffer.clock_led) {
+	slave_clock_cache = serial_m2s_buffer.clock_led;
+	led_toggle(4, slave_clock_cache);
+  }
+  if (slave_slock_cache != serial_m2s_buffer.slock_led) {
+	slave_slock_cache = serial_m2s_buffer.slock_led;
+	led_toggle(5, slave_slock_cache);
+  }
+  
+}
+
+#endif
diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h
new file mode 100644
index 000000000..422e2ecb9
--- /dev/null
+++ b/keyboards/ai03/orbit/transport.h
@@ -0,0 +1,42 @@
+#pragma once
+
+#include <common/matrix.h>
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+typedef struct _Serial_s2m_buffer_t {
+  // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
+  matrix_row_t smatrix[ROWS_PER_HAND];
+} Serial_s2m_buffer_t;
+
+typedef struct _Serial_m2s_buffer_t {
+#ifdef BACKLIGHT_ENABLE
+    uint8_t backlight_level;
+#endif
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    rgblight_config_t rgblight_config; //not yet use
+    //
+    // When MCUs on both sides drive their respective RGB LED chains,
+    // it is necessary to synchronize, so it is necessary to communicate RGB information.
+    // In that case, define the RGBLIGHT_SPLIT macro.
+    //
+    // Otherwise, if the master side MCU drives both sides RGB LED chains,
+    // there is no need to communicate.
+#endif
+
+	uint8_t current_layer;
+	uint8_t nlock_led;
+	uint8_t clock_led;
+	uint8_t slock_led;
+
+} Serial_m2s_buffer_t;
+
+extern volatile Serial_s2m_buffer_t serial_s2m_buffer;
+extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
+
+void transport_master_init(void);
+void transport_slave_init(void);
+
+// returns false if valid data not received from slave
+bool transport_master(matrix_row_t matrix[]);
+void transport_slave(matrix_row_t matrix[]);