From: Yaroslav Halchenko Date: Thu, 6 Dec 2012 20:44:38 +0000 (-0500) Subject: preseed.cfg becomes an .in for Python string interpolations X-Git-Url: https://git.donarmstrong.com/?a=commitdiff_plain;h=59544111359aec2f1fad5cb591298e516b171249;p=neurodebian.git preseed.cfg becomes an .in for Python string interpolations --- diff --git a/vm/d-i/wheezy/preseed.cfg b/vm/d-i/wheezy/preseed.cfg deleted file mode 100644 index 9ec5f33..0000000 --- a/vm/d-i/wheezy/preseed.cfg +++ /dev/null @@ -1,338 +0,0 @@ -#### Contents of the preconfiguration file (for wheezy) -### Hints: -### To get a list of current d-i setting keys, run -### sudo debconf-get-selections --installer -### on an up-to-date system -### -### Localization -# Locale sets language and country. -d-i debian-installer/locale string en_US.UTF-8 -d-i debian-installer/language string en -d-i debian-installer/country string US - -# Keyboard selection. -#d-i console-tools/archs select at -#d-i console-setup-pc-ekmap/keymap select us -# Need to set "American English" for "Keymap to use" -d-i countrychooser/country-name select United States -# Example for a different keyboard architecture -#d-i console-keymaps-usb/keymap select mac-usb-us -#d-i console-keymaps-at/keymap select us -d-i keyboard-configuration/xkb-keymap select us - -### Network configuration -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. -d-i netcfg/choose_interface select auto - -# To pick a particular interface instead: -#d-i netcfg/choose_interface select eth1 - -# If you have a slow dhcp server and the installer times out waiting for -# it, this might be useful. -#d-i netcfg/dhcp_timeout string 60 - -# If you prefer to configure the network manually, uncomment this line and -# the static network configuration below. -#d-i netcfg/disable_dhcp boolean true - -# If you want the preconfiguration file to work on systems both with and -# without a dhcp server, uncomment these lines and the static network -# configuration below. -#d-i netcfg/dhcp_failed note -#d-i netcfg/dhcp_options select Configure network manually - -# Static network configuration. -#d-i netcfg/get_nameservers string 192.168.1.1 -#d-i netcfg/get_ipaddress string 192.168.1.42 -#d-i netcfg/get_netmask string 255.255.255.0 -#d-i netcfg/get_gateway string 192.168.1.1 -#d-i netcfg/confirm_static boolean true - -# Any hostname and domain names assigned from dhcp take precedence over -# values set here. However, setting the values still prevents the questions -# from being shown, even if values come from dhcp. -d-i netcfg/get_hostname string neurodebian -d-i netcfg/invalid_hostname string neurodebian -# d-i netcfg/get_domain string unassigned-domain - -# Disable that annoying WEP key dialog. -# d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -# d-i netcfg/dhcp_hostname string neurodebian - -# If non-free firmware is needed for the network or other hardware, you can -# configure the installer to always try to load it, without prompting. Or -# change to false to disable asking. -#d-i hw-detect/load_firmware boolean true - -### Network console -# Use the following settings if you wish to make use of the network-console -# component for remote installation over SSH. This only makes sense if you -# intend to perform the remainder of the installation manually. -#d-i anna/choose_modules string network-console -#d-i network-console/password password r00tme -#d-i network-console/password-again password r00tme - -### Mirror settings -# If you select ftp, the mirror/country string does not need to be set. -#d-i mirror/protocol string ftp -d-i mirror/country string manual -d-i mirror/http/hostname string ftp.debian.de -d-i mirror/http/directory string /debian -#d-i mirror/http/proxy string - -# Suite to install. -d-i mirror/suite string wheezy -# Suite to use for loading installer components (optional). -#d-i mirror/udeb/suite string testing - -### Clock and time zone setup -# Controls whether or not the hardware clock is set to UTC. -d-i clock-setup/utc boolean true - -# You may set this to any valid setting for $TZ; see the contents of -# /usr/share/zoneinfo/ for valid values. -d-i time/zone string Europe/Berlin - -# Controls whether to use NTP to set the clock during the install -d-i clock-setup/ntp boolean true -# NTP server to use. The default is almost always fine here. -#d-i clock-setup/ntp-server string ntp.example.com - -### Partitioning -# If the system has free space you can choose to only partition that space. -#d-i partman-auto/init_automatically_partition select biggest_free - -# Alternatively, you can specify a disk to partition. The device name must -# be given in traditional non-devfs format. -# Note: A disk must be specified, unless the system has only one disk. -# For example, to use the first SCSI/SATA hard disk: -d-i partman-auto/disk string /dev/sda -# In addition, you'll need to specify the method to use. -# The presently available methods are: "regular", "lvm" and "crypto" -d-i partman-auto/method string regular - -# If one of the disks that are going to be automatically partitioned -# contains an old LVM configuration, the user will normally receive a -# warning. This can be preseeded away... -#d-i partman-lvm/device_remove_lvm boolean true -# The same applies to pre-existing software RAID array: -#d-i partman-md/device_remove_md boolean true -# And the same goes for the confirmation to write the lvm partitions. -#d-i partman-lvm/confirm boolean true - -# You can choose one of the three predefined partitioning recipes: -# - atomic: all files in one partition -# - home: separate /home partition -# - multi: separate /home, /usr, /var, and /tmp partitions -d-i partman-auto/choose_recipe select atomic - -# Or provide a recipe of your own... -# The recipe format is documented in the file devel/partman-auto-recipe.txt. -# If you have a way to get a recipe file into the d-i environment, you can -# just point at it. -#d-i partman-auto/expert_recipe_file string /hd-media/recipe - -# If not, you can put an entire recipe into the preconfiguration file in one -# (logical) line. This example creates a small /boot partition, suitable -# swap, and uses the rest of the space for the root partition: -d-i partman-auto/expert_recipe string \ - boot-root :: \ - 10000 40000 1000000000 ext4 \ - $primary{ } $bootable{ } \ - method{ format } format{ } \ - use_filesystem{ } filesystem{ ext4 } \ - label{NEURODEBIAN} \ - mountpoint{ / } \ - . \ - 2048 2048 2048 linux-swap \ - method{ swap } format{ } \ - . - -# This makes partman automatically partition without confirmation, provided -# that you told it what to do using one of the methods above. -d-i partman/confirm_write_new_label boolean true -d-i partman/choose_partition select finish -d-i partman/confirm boolean true -d-i partman/confirm_nooverwrite boolean true - -### Base system installation -# Select the initramfs generator used to generate the initrd for 2.6 kernels. -#d-i base-installer/kernel/linux/initramfs-generators string yaird - -# The kernel image (meta) package to be installed; "none" can be used if no -# kernel is to be installed. -#d-i base-installer/kernel/image string linux-image-2.6-486 - -### Account setup -# Skip creation of a root account (normal user account will be able to -# use sudo). -#d-i passwd/root-login boolean false -# Alternatively, to skip creation of a normal user account. -#d-i passwd/make-user boolean false - -# Root password, either in clear text -d-i passwd/root-password password neurodebian -d-i passwd/root-password-again password neurodebian -# or encrypted using an MD5 hash. -#d-i passwd/root-password-crypted password [MD5 hash] - -# To create a normal user account. -d-i passwd/user-fullname string NeuroDebian User -d-i passwd/username string brain -# Normal user's password, either in clear text -d-i passwd/user-password password neurodebian -d-i passwd/user-password-again password neurodebian -# or encrypted using an MD5 hash. -#d-i passwd/user-password-crypted password [MD5 hash] -# Create the first user with the specified UID instead of the default. -d-i passwd/user-uid string 1000 -# XXX no gid? - -# The user account will be added to some standard initial groups. To -# override that, use this. -d-i passwd/user-default-groups string audio cdrom floppy video plugdev dip sudo - -### Apt setup -# You can choose to install non-free and contrib software. -d-i apt-setup/non-free boolean true -d-i apt-setup/contrib boolean true -# Uncomment this if you don't want to use a network mirror. -#d-i apt-setup/use_mirror boolean false -# Select which update services to use; define the mirrors to be used. -# Values shown below are the normal defaults. -#d-i apt-setup/services-select multiselect security, volatile -d-i apt-setup/security_host string security.debian.org -#d-i apt-setup/volatile_host string volatile.debian.org -# XXX? - -# Additional repositories, local[0-9] available -#d-i apt-setup/local0/repository string \ -# http://local.server/debian stable main -#d-i apt-setup/local0/comment string local server -# XXX our nd? -#d-i apt-getup/local0/repository string \ -# http://neuro.debian.net/debian data main contrib non-free -#d-i apt-setup/local0/comment string NeuroDebian data -#d-i apt-setup/local0/source boolean true -#d-i apt-getup/local1/repository string \ -# http://neuro.debian.net/debian squeeze main contrib non-free -#d-i apt-setup/local1/comment string NeuroDebian software -#d-i apt-setup/local1/source boolean true - - -# URL to the public key of the local repository; you must provide a key or -# apt will complain about the unauthenticated repository and so the -# sources.list line will be left commented out -#d-i apt-setup/local0/key string \ -# http://neuro.debian.net/_static/neuro.debian.net.asc - -# By default the installer requires that repositories be authenticated -# using a known gpg key. This setting can be used to disable that -# authentication. Warning: Insecure, not recommended. -#d-i debian-installer/allow_unauthenticated string true - -### Package selection -#tasksel tasksel/first multiselect standard, web-server -tasksel tasksel/first multiselect -# If the desktop task is selected, install the kde and xfce desktops -# instead of the default gnome desktop. -#tasksel tasksel/desktop multiselect kde, xfce - -# Individual additional packages to install -#d-i pkgsel/include string openssh-server build-essential -# Whether to upgrade packages after debootstrap. -# Allowed values: none, safe-upgrade, full-upgrade -#d-i pkgsel/upgrade select none - -# Some versions of the installer can report back on what software you have -# installed, and what software you use. The default is not to report back, -# but sending reports helps the project determine what software is most -# popular and include it on CDs. -# ND: popcon installed upon initial boot -popularity-contest popularity-contest/participate boolean false - -### Boot loader installation -# Grub is the default boot loader (for x86). If you want lilo installed -# instead, uncomment this: -#d-i grub-installer/skip boolean true -# To also skip installing lilo, and install no bootloader, uncomment this -# too: -#d-i lilo-installer/skip boolean true - -# This is fairly safe to set, it makes grub install automatically to the MBR -# if no other operating system is detected on the machine. -d-i grub-installer/only_debian boolean true - -# This one makes grub-installer install to the MBR if it also finds some other -# OS, which is less safe as it might not be able to boot that other OS. -d-i grub-installer/with_other_os boolean false - -# Alternatively, if you want to install to a location other than the mbr, -# uncomment and edit these lines: -#d-i grub-installer/only_debian boolean false -#d-i grub-installer/with_other_os boolean false -#d-i grub-installer/bootdev string (hd0,0) -# To install grub to multiple disks: -#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) - -# Optional password for grub, either in clear text -#d-i grub-installer/password password r00tme -#d-i grub-installer/password-again password r00tme -# or encrypted using an MD5 hash, see grub-md5-crypt(8). -#d-i grub-installer/password-crypted password [MD5 hash] - -### Finishing up the installation -# During installations from serial console, the regular virtual consoles -# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next -# line to prevent this. -#d-i finish-install/keep-consoles boolean true - -# Avoid that last message about the install being complete. -d-i finish-install/reboot_in_progress note - -# This will prevent the installer from ejecting the CD during the reboot, -# which is useful in some situations. -#d-i cdrom-detect/eject boolean false - -# This is how to make the installer shutdown when finished, but not -# reboot into the installed system. -#d-i debian-installer/exit/halt boolean true -# This will power off the machine instead of just halting it. -d-i debian-installer/exit/poweroff boolean true - -### Preseeding other packages -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - - -#### Advanced options -### Running custom commands during the installation -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preconfiguration file like this one. Only use preconfiguration files from -# trusted locations! To drive that home, and because it's generally useful, -# here's a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -#d-i preseed/early_command string anna-install some-udeb - -# This command is run just before the install finishes, but when there is -# still a usable /target directory. You can chroot to /target and use it -# directly, or use the apt-install and in-target commands to easily install -# packages and run commands in the target system. -#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh -#d-i preseed/late_command string wget -O/target/tmp/initial_setup http://git.debian.org/?p=pkg-exppsy/neurodebian.git;a=blob_plain;f=vm/d-i/tools/initial_setup;hb=HEAD; \ -d-i preseed/late_command string wget -O/target/tmp/initial_setup http://10.0.2.2:10100/initial_setup ; \ - in-target /bin/bash /tmp/initial_setup - -# XXX here get/call nd_setupguestos ? - diff --git a/vm/d-i/wheezy/preseed.cfg.in b/vm/d-i/wheezy/preseed.cfg.in new file mode 100644 index 0000000..9ec5f33 --- /dev/null +++ b/vm/d-i/wheezy/preseed.cfg.in @@ -0,0 +1,338 @@ +#### Contents of the preconfiguration file (for wheezy) +### Hints: +### To get a list of current d-i setting keys, run +### sudo debconf-get-selections --installer +### on an up-to-date system +### +### Localization +# Locale sets language and country. +d-i debian-installer/locale string en_US.UTF-8 +d-i debian-installer/language string en +d-i debian-installer/country string US + +# Keyboard selection. +#d-i console-tools/archs select at +#d-i console-setup-pc-ekmap/keymap select us +# Need to set "American English" for "Keymap to use" +d-i countrychooser/country-name select United States +# Example for a different keyboard architecture +#d-i console-keymaps-usb/keymap select mac-usb-us +#d-i console-keymaps-at/keymap select us +d-i keyboard-configuration/xkb-keymap select us + +### Network configuration +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto + +# To pick a particular interface instead: +#d-i netcfg/choose_interface select eth1 + +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +#d-i netcfg/dhcp_timeout string 60 + +# If you prefer to configure the network manually, uncomment this line and +# the static network configuration below. +#d-i netcfg/disable_dhcp boolean true + +# If you want the preconfiguration file to work on systems both with and +# without a dhcp server, uncomment these lines and the static network +# configuration below. +#d-i netcfg/dhcp_failed note +#d-i netcfg/dhcp_options select Configure network manually + +# Static network configuration. +#d-i netcfg/get_nameservers string 192.168.1.1 +#d-i netcfg/get_ipaddress string 192.168.1.42 +#d-i netcfg/get_netmask string 255.255.255.0 +#d-i netcfg/get_gateway string 192.168.1.1 +#d-i netcfg/confirm_static boolean true + +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. +d-i netcfg/get_hostname string neurodebian +d-i netcfg/invalid_hostname string neurodebian +# d-i netcfg/get_domain string unassigned-domain + +# Disable that annoying WEP key dialog. +# d-i netcfg/wireless_wep string +# The wacky dhcp hostname that some ISPs use as a password of sorts. +# d-i netcfg/dhcp_hostname string neurodebian + +# If non-free firmware is needed for the network or other hardware, you can +# configure the installer to always try to load it, without prompting. Or +# change to false to disable asking. +#d-i hw-detect/load_firmware boolean true + +### Network console +# Use the following settings if you wish to make use of the network-console +# component for remote installation over SSH. This only makes sense if you +# intend to perform the remainder of the installation manually. +#d-i anna/choose_modules string network-console +#d-i network-console/password password r00tme +#d-i network-console/password-again password r00tme + +### Mirror settings +# If you select ftp, the mirror/country string does not need to be set. +#d-i mirror/protocol string ftp +d-i mirror/country string manual +d-i mirror/http/hostname string ftp.debian.de +d-i mirror/http/directory string /debian +#d-i mirror/http/proxy string + +# Suite to install. +d-i mirror/suite string wheezy +# Suite to use for loading installer components (optional). +#d-i mirror/udeb/suite string testing + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string Europe/Berlin + +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean true +# NTP server to use. The default is almost always fine here. +#d-i clock-setup/ntp-server string ntp.example.com + +### Partitioning +# If the system has free space you can choose to only partition that space. +#d-i partman-auto/init_automatically_partition select biggest_free + +# Alternatively, you can specify a disk to partition. The device name must +# be given in traditional non-devfs format. +# Note: A disk must be specified, unless the system has only one disk. +# For example, to use the first SCSI/SATA hard disk: +d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: "regular", "lvm" and "crypto" +d-i partman-auto/method string regular + +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... +#d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +#d-i partman-md/device_remove_md boolean true +# And the same goes for the confirmation to write the lvm partitions. +#d-i partman-lvm/confirm boolean true + +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /usr, /var, and /tmp partitions +d-i partman-auto/choose_recipe select atomic + +# Or provide a recipe of your own... +# The recipe format is documented in the file devel/partman-auto-recipe.txt. +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +# If not, you can put an entire recipe into the preconfiguration file in one +# (logical) line. This example creates a small /boot partition, suitable +# swap, and uses the rest of the space for the root partition: +d-i partman-auto/expert_recipe string \ + boot-root :: \ + 10000 40000 1000000000 ext4 \ + $primary{ } $bootable{ } \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + label{NEURODEBIAN} \ + mountpoint{ / } \ + . \ + 2048 2048 2048 linux-swap \ + method{ swap } format{ } \ + . + +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +d-i partman/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +### Base system installation +# Select the initramfs generator used to generate the initrd for 2.6 kernels. +#d-i base-installer/kernel/linux/initramfs-generators string yaird + +# The kernel image (meta) package to be installed; "none" can be used if no +# kernel is to be installed. +#d-i base-installer/kernel/image string linux-image-2.6-486 + +### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). +#d-i passwd/root-login boolean false +# Alternatively, to skip creation of a normal user account. +#d-i passwd/make-user boolean false + +# Root password, either in clear text +d-i passwd/root-password password neurodebian +d-i passwd/root-password-again password neurodebian +# or encrypted using an MD5 hash. +#d-i passwd/root-password-crypted password [MD5 hash] + +# To create a normal user account. +d-i passwd/user-fullname string NeuroDebian User +d-i passwd/username string brain +# Normal user's password, either in clear text +d-i passwd/user-password password neurodebian +d-i passwd/user-password-again password neurodebian +# or encrypted using an MD5 hash. +#d-i passwd/user-password-crypted password [MD5 hash] +# Create the first user with the specified UID instead of the default. +d-i passwd/user-uid string 1000 +# XXX no gid? + +# The user account will be added to some standard initial groups. To +# override that, use this. +d-i passwd/user-default-groups string audio cdrom floppy video plugdev dip sudo + +### Apt setup +# You can choose to install non-free and contrib software. +d-i apt-setup/non-free boolean true +d-i apt-setup/contrib boolean true +# Uncomment this if you don't want to use a network mirror. +#d-i apt-setup/use_mirror boolean false +# Select which update services to use; define the mirrors to be used. +# Values shown below are the normal defaults. +#d-i apt-setup/services-select multiselect security, volatile +d-i apt-setup/security_host string security.debian.org +#d-i apt-setup/volatile_host string volatile.debian.org +# XXX? + +# Additional repositories, local[0-9] available +#d-i apt-setup/local0/repository string \ +# http://local.server/debian stable main +#d-i apt-setup/local0/comment string local server +# XXX our nd? +#d-i apt-getup/local0/repository string \ +# http://neuro.debian.net/debian data main contrib non-free +#d-i apt-setup/local0/comment string NeuroDebian data +#d-i apt-setup/local0/source boolean true +#d-i apt-getup/local1/repository string \ +# http://neuro.debian.net/debian squeeze main contrib non-free +#d-i apt-setup/local1/comment string NeuroDebian software +#d-i apt-setup/local1/source boolean true + + +# URL to the public key of the local repository; you must provide a key or +# apt will complain about the unauthenticated repository and so the +# sources.list line will be left commented out +#d-i apt-setup/local0/key string \ +# http://neuro.debian.net/_static/neuro.debian.net.asc + +# By default the installer requires that repositories be authenticated +# using a known gpg key. This setting can be used to disable that +# authentication. Warning: Insecure, not recommended. +#d-i debian-installer/allow_unauthenticated string true + +### Package selection +#tasksel tasksel/first multiselect standard, web-server +tasksel tasksel/first multiselect +# If the desktop task is selected, install the kde and xfce desktops +# instead of the default gnome desktop. +#tasksel tasksel/desktop multiselect kde, xfce + +# Individual additional packages to install +#d-i pkgsel/include string openssh-server build-essential +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +#d-i pkgsel/upgrade select none + +# Some versions of the installer can report back on what software you have +# installed, and what software you use. The default is not to report back, +# but sending reports helps the project determine what software is most +# popular and include it on CDs. +# ND: popcon installed upon initial boot +popularity-contest popularity-contest/participate boolean false + +### Boot loader installation +# Grub is the default boot loader (for x86). If you want lilo installed +# instead, uncomment this: +#d-i grub-installer/skip boolean true +# To also skip installing lilo, and install no bootloader, uncomment this +# too: +#d-i lilo-installer/skip boolean true + +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean true + +# This one makes grub-installer install to the MBR if it also finds some other +# OS, which is less safe as it might not be able to boot that other OS. +d-i grub-installer/with_other_os boolean false + +# Alternatively, if you want to install to a location other than the mbr, +# uncomment and edit these lines: +#d-i grub-installer/only_debian boolean false +#d-i grub-installer/with_other_os boolean false +#d-i grub-installer/bootdev string (hd0,0) +# To install grub to multiple disks: +#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) + +# Optional password for grub, either in clear text +#d-i grub-installer/password password r00tme +#d-i grub-installer/password-again password r00tme +# or encrypted using an MD5 hash, see grub-md5-crypt(8). +#d-i grub-installer/password-crypted password [MD5 hash] + +### Finishing up the installation +# During installations from serial console, the regular virtual consoles +# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next +# line to prevent this. +#d-i finish-install/keep-consoles boolean true + +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +# This is how to make the installer shutdown when finished, but not +# reboot into the installed system. +#d-i debian-installer/exit/halt boolean true +# This will power off the machine instead of just halting it. +d-i debian-installer/exit/poweroff boolean true + +### Preseeding other packages +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + + +#### Advanced options +### Running custom commands during the installation +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preconfiguration file like this one. Only use preconfiguration files from +# trusted locations! To drive that home, and because it's generally useful, +# here's a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +#d-i preseed/early_command string anna-install some-udeb + +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. +#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh +#d-i preseed/late_command string wget -O/target/tmp/initial_setup http://git.debian.org/?p=pkg-exppsy/neurodebian.git;a=blob_plain;f=vm/d-i/tools/initial_setup;hb=HEAD; \ +d-i preseed/late_command string wget -O/target/tmp/initial_setup http://10.0.2.2:10100/initial_setup ; \ + in-target /bin/bash /tmp/initial_setup + +# XXX here get/call nd_setupguestos ? +