From: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
Date: Sun, 7 Apr 2019 00:30:48 +0000 (-0700)
Subject: i2c_init update to work with atmega32a boards (#5562)
X-Git-Url: https://git.donarmstrong.com/?a=commitdiff_plain;h=410984486b0a5c61174c6e4e5a3570f1b09f97dc;p=qmk_firmware.git

i2c_init update to work with atmega32a boards (#5562)

* On i2c_init, enable two wire interface, twi interrupt, and slave
address ACK along with pull up resistors.

* thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block
---

diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c
index 0db949db4..ba6d0d158 100755
--- a/drivers/avr/i2c_master.c
+++ b/drivers/avr/i2c_master.c
@@ -18,6 +18,18 @@
 void i2c_init(void) {
   TWSR = 0; /* no prescaler */
   TWBR = (uint8_t)TWBR_val;
+
+  #ifdef __AVR_ATmega32A__
+  // set pull-up resistors on I2C bus pins
+  PORTC |= 0b11;
+
+  // enable TWI (two-wire interface)
+  TWCR |= (1 << TWEN);
+
+  // enable TWI interrupt and slave address ACK
+  TWCR |= (1 << TWIE);
+  TWCR |= (1 << TWEA);
+  #endif
 }
 
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {