From: Joey Hess Date: Wed, 18 Nov 2009 19:48:56 +0000 (-0500) Subject: releasing version 7.4.4 X-Git-Tag: 7.4.4^0 X-Git-Url: https://git.donarmstrong.com/?a=commitdiff_plain;h=0eed5884e3e476a4b0c69c68faf484186fc4a9da;p=debhelper.git releasing version 7.4.4 --- diff --git a/debian/changelog b/debian/changelog index 7e213ba..129b21c 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,4 +1,4 @@ -debhelper (7.4.4) UNRELEASED; urgency=low +debhelper (7.4.4) unstable; urgency=low * The makefile buildsystem (and derived buildsystems cmake, autoconf, etc) now supports parallel building by default, as specified via @@ -16,7 +16,7 @@ debhelper (7.4.4) UNRELEASED; urgency=low time soon.) Closes: #554509 * Separate deprecated programs in the list of commands in debhelper(7). Closes: #548382 - * Adjust code to add deprecation warning for compatability level 4. + * Adjust code to add deprecation warning for compatibility level 4. (Man page already said it was deprecated.) Closes: #555899 * dh_installdocs: Warn if a doc-base file cannot be parsed to find a document id. Closes: #555677 @@ -31,7 +31,7 @@ debhelper (7.4.4) UNRELEASED; urgency=low makefile once cmake generated a makefile. Closes: #555805 (Modestas Vainius) - -- Joey Hess Wed, 28 Oct 2009 18:10:45 -0400 + -- Joey Hess Wed, 18 Nov 2009 14:44:21 -0500 debhelper (7.4.3) unstable; urgency=low @@ -693,7 +693,7 @@ debhelper (7.0.8) unstable; urgency=low cli-common. * Moved python-support special case out of dh and into a python-support sequence addon. --with=python-support is enabled by default to avoid - breaking backwards compatability. + breaking backwards compatibility. -- Joey Hess Sun, 04 May 2008 16:10:54 -0400 @@ -1628,7 +1628,7 @@ debhelper (5.0.1) unstable; urgency=low debhelper (5.0.0) unstable; urgency=low - * debhelper v5 mode is finalised and the new recommended compatability + * debhelper v5 mode is finalised and the new recommended compatibility level. Unless your package uses dh_strip --dbg-package, switching to v5 is 99.999% unlikely to change anything in a package, and it allows adding comments to all your debhelper config files, so I recommend making @@ -1766,7 +1766,7 @@ debhelper (4.9.1) unstable; urgency=low debhelper (4.9.0) unstable; urgency=low - * Begin work on compatability level 5. The set of changes in this mode is + * Begin work on compatibility level 5. The set of changes in this mode is still being determined, and will be until debhelper version 5.0 is released, so use at your own risk. * dh_strip: In v5, make --dbg-package specify a single debugging package @@ -2986,7 +2986,7 @@ debhelper (4.0.0) unstable; urgency=low * v4 mode is done, you may now use it without fear of it changing. (This idea of this upload is to get v4 into woody so people won't run into many issues backporting from sarge to woody later on. Packages targeted - for woody should continue to use whatever compatability level they are + for woody should continue to use whatever compatibility level they are using.) -- Joey Hess Tue, 11 Apr 2002 17:28:57 -0400 @@ -3064,7 +3064,7 @@ debhelper (3.4.5) unstable; urgency=low debhelper (3.4.4) unstable; urgency=low * Introduced the debian/compat file. This is the new, preferred way to say - what debhelper compatability level your package uses. It has the big + what debhelper compatibility level your package uses. It has the big advantage of being available to debhelper when you run it at the command line, as well as in debian/rules. * A new v4 feature: dh_installinit, in v4 mode, will use invoke-rc.d. @@ -3117,11 +3117,11 @@ debhelper (3.4.0) unstable; urgency=low * Began work on v4 support (and thus the large version number jump), and it is only for the very brave right now since I will unhesitatingly break - compatability in v4 mode as I'm developing it. Currently, updating to v4 + compatibility in v4 mode as I'm developing it. Currently, updating to v4 mode will only make dh_makeshlibs -V generate shared library deps that omit the debian part of the version number. The reasoning behind this change is that the debian revision should not typically break binary - compatability, that existing use of -V is causing too tight versioned + compatibility, that existing use of -V is causing too tight versioned deps, and that if you do need to include the debian revision for some reason, you can always write it out by hand. Closes: #101497 * dh_testversion is deprecated -- use build deps instead. A warning message @@ -3549,7 +3549,7 @@ debhelper (3.0.0) unstable; urgency=low begin using it, since this is much better then dh_installmanpages's evilness. I've been meaning to do this for a very long time.. Closes: #38673, #53964, #64297, #16933, #17061, #54059, #54373, #61816 - * dh_installmanpages remains in the package for backwards compatability, + * dh_installmanpages remains in the package for backwards compatibility, but is mildly deprecated. * dh_testversion is deprecated; use build dependancies instead. * dh_suidregister: re-enabled. Aj thinks that requiring people to stop @@ -3739,14 +3739,14 @@ debhelper (2.2.1) unstable; urgency=low after I learned people use it for eg, documenting the source package itself. Closes: #34628, since it seems this is not such an "incredibly minor" change after all. Never underetimate the annoyance of - backwards-compatability. + backwards-compatibility. -- Joey Hess Mon, 27 Nov 2000 12:01:52 -0800 debhelper (2.2.0) unstable; urgency=low * DH_COMPAT=3 now enables the following new features which I can't just - turn on by default for fear of breaking backwards compatability: + turn on by default for fear of breaking backwards compatibility: - dh_makeshlibs makes the postinst/postrm call ldconfig. Closes: #77154 Patch from Masato Taruishi (modified). If you use this, be sure dh_makeshlibs runs before dh_installdeb; many @@ -3824,7 +3824,7 @@ debhelper (2.1.21) unstable; urgency=low dpkg-dev >= 1.7.0 to make sure this doesn't break anything. * While I'm updating for dpkg 1.7.0, I removed the -ldirectory hack from dh_shlibdeps; dpkg-shlibdeps has its own much more brutal hack to - make this work. The switch is ignored now for backwards compatability. + make this work. The switch is ignored now for backwards compatibility. * dh_suidregister will be deprecated soon -- dpkg-statoverride is a much better way. @@ -3884,7 +3884,7 @@ debhelper (2.1.16) unstable; urgency=low debhelper (2.1.15) unstable; urgency=low - * dh_installwm: patched a path in some backwards compatability code. + * dh_installwm: patched a path in some backwards compatibility code. Closes: #75283 -- Joey Hess Mon, 23 Oct 2000 10:13:44 -0700 @@ -3999,7 +3999,7 @@ debhelper (2.1.1) unstable; urgency=low debhelper (2.1.0) unstable; urgency=low * I started work on debhelper v2 over a year ago, with a long list of - changes I hoped to get in that broke backwards compatability. That + changes I hoped to get in that broke backwards compatibility. That development stalled after only the most important change was made, although I did get out over 100 releases in the debhelper 2.0.x tree. In the meantime, lots of packages have switched to using v2, despite my @@ -4464,7 +4464,7 @@ debhelper (2.0.52) unstable; urgency=low debhelper (2.0.51) unstable; urgency=low - * dh_installdocs: create the compatability symlink before calling + * dh_installdocs: create the compatibility symlink before calling install-docs. I'm told this is better in some cases. (Closes: #45608) * examples/rules.multi2: clarified what you have to comment/uncomment. @@ -4551,7 +4551,7 @@ debhelper (2.0.40) unstable; urgency=low * Closes: #42489, #42587, #41732. * dh_installdocs: Adds code to postinst and prerm as specified in http://www.debian.org/Lists-Archives/debian-ctte-9908/msg00038.html, - to make /usr/doc/ a compatability symlink to + to make /usr/doc/ a compatibility symlink to /usr/share/doc/. Note that currently if something exists in /usr/doc/ when the postinst is run, it will silently not make the symlink. I'm considering more intellingent handing of this case. @@ -4785,7 +4785,7 @@ debhelper (2.0.02) unstable; urgency=low * If you're going to use v2, it's reccommended you call "dh_testversion 2". Added a note about that to doc/v2. * Dh_Lib.pm compat: if a version that is greater than the highest - supported compatability level is specified, abort with an error. Perhaps + supported compatibility level is specified, abort with an error. Perhaps there will be a debhelper v3 some day... -- Joey Hess Thu, 1 Jul 1999 14:08:14 -0700 @@ -4805,7 +4805,7 @@ debhelper (2.0.00) unstable; urgency=low dh_movefiles still uses it.) * debhelper.1: documented this. * Dh_lib.pm: added compat(), pass in a number, it returns true if the - current compatability level is equal to that number. + current compatibility level is equal to that number. * doc/PROGRAMMING: documented that. * debhelper itself now builds using DH_COMPAT=2. * dh_debstd forces DH_COMPAT=1, because it needs to stay compatable with @@ -5534,7 +5534,7 @@ debhelper (1.1.20) unstable; urgency=low debhelper (1.1.19) unstable; urgency=low * dh_installmanpages: look at basename of man pacges specified on command - line to skip, for backwards compatability. + line to skip, for backwards compatibility. -- Joey Hess Thu, 10 Sep 1998 11:31:42 -0700 @@ -5897,7 +5897,7 @@ debhelper (0.90) unstable; urgency=low * dh_testroot: test for uid == 0, instead of username == root, becuase some people enjoy changing root's name. * dh_installinit: handle debian/init.d as well as debian/init files, - for backwards compatability with debstd. Unlike with debstd, the two + for backwards compatibility with debstd. Unlike with debstd, the two files are treated identically. * dh_lib, PROGRAMMING: added "warning" function. * Minor man page fixes. @@ -6403,7 +6403,7 @@ debhelper (0.18) unstable; urgency=low debhelper (0.17) unstable; urgency=low * Added dh_installdirs, automatically creates subdirectories (for - compatability with debstd's debian/dirs file. + compatibility with debstd's debian/dirs file. * dh_lib: fixed problem with -P flag. -- Joey Hess Fri, 7 Nov 1997 16:07:11 -0500