-SRC += host.c \
- keyboard.c \
- command.c \
- layer.c \
- timer.c \
- print.c \
- bootloader.c \
- util.c
+COMMON_DIR = common
+SRC += $(COMMON_DIR)/host.c \
+ $(COMMON_DIR)/keyboard.c \
+ $(COMMON_DIR)/command.c \
+ $(COMMON_DIR)/layer.c \
+ $(COMMON_DIR)/timer.c \
+ $(COMMON_DIR)/print.c \
+ $(COMMON_DIR)/bootloader.c \
+ $(COMMON_DIR)/util.c
# Option modules
ifdef MOUSEKEY_ENABLE
- SRC += mousekey.c
+ SRC += $(COMMON_DIR)/mousekey.c
OPT_DEFS += -DMOUSEKEY_ENABLE
endif
ifdef PS2_MOUSE_ENABLE
- SRC += ps2.c \
- ps2_mouse.c
+ SRC += $(COMMON_DIR)/ps2.c \
+ $(COMMON_DIR)/ps2_mouse.c
OPT_DEFS += -DPS2_MOUSE_ENABLE
endif
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "bootloader.h"
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+/* Start Bootloader from Application
+ * See
+ * http://www.pjrc.com/teensy/jump_to_bootloader.html
+ * http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html
+ */
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+// TODO: support usbasp
+/* Boot Section Size in bytes
+ * Teensy halfKay 512
+ * Atmel DFU loader 4096
+ * LUFA bootloader 4096
+ */
+#ifndef BOOT_SIZE
+#define BOOT_SIZE 512
+#endif
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
+#define FLASH_SIZE (FLASHEND + 1)
+#define BOOTLOADER_START (FLASHEND - BOOT_SIZE)
-#include "bootloader.h"
+void bootloader_jump(void) {
+ cli();
+
+ //
+ //Teensy
+ //
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+ // disable watchdog, if enabled
+ // disable all peripherals
+ UDCON = 1;
+ USBCON = (1<<FRZCLK); // disable USB
+ UCSR1B = 0;
+ _delay_ms(5);
+#else
+ // This makes custom USBasploader come up.
+ MCUSR = 0;
+#endif
+
+#if defined(__AVR_AT90USB162__)
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
+ TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
+ DDRB = 0; DDRC = 0; DDRD = 0;
+ PORTB = 0; PORTC = 0; PORTD = 0;
+#elif defined(__AVR_ATmega32U4__)
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
+ DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
+ PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+#elif defined(__AVR_AT90USB646__)
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
+ DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
+ PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+#elif defined(__AVR_AT90USB1286__)
+ EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
+ DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
+ PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+#endif
+
+
+ //
+ //USBasp
+ //
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P)
+ // This makes custom USBasploader come up.
+ MCUSR = 0;
+
+ // initialize ports
+ PORTB = 0; PORTC= 0; PORTD = 0;
+ DDRB = 0; DDRC= 0; DDRD = 0;
+
+ // disable interrupts
+ EIMSK = 0; EECR = 0; SPCR = 0;
+ ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
+ TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
+ ADCSRA = 0; TWCR = 0; UCSR0B = 0;
+#endif
-void bootloader_jump(void) __attribute__ ((weak));
-void bootloader_jump(void) {}
+ // start Bootloader
+ ((void (*)(void))BOOTLOADER_START)();
+}
}
break;
case KB_S:
+ print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n");
#ifdef HOST_PJRC
print("UDCON: "); phex(UDCON); print("\n");
print("UDIEN: "); phex(UDIEN); print("\n");
void host_system_send(uint16_t data)
{
+ static uint16_t last_data = 0;
+ if (data == last_data) return;
+ last_data = data;
+
if (!driver) return;
(*driver->send_system)(data);
}
void host_consumer_send(uint16_t data)
{
- // TODO: this is needed?
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint8_t fn_bits = 0;
#ifdef EXTRAKEY_ENABLE
uint16_t consumer_code = 0;
+ uint16_t system_code = 0;
#endif
matrix_scan();
#ifdef HOST_PJRC
if (suspend && remote_wakeup) {
usb_remote_wakeup();
- } else {
- host_system_send(SYSTEM_POWER_DOWN);
}
-#else
- host_system_send(SYSTEM_POWER_DOWN);
#endif
- host_system_send(0);
- _delay_ms(500);
+ system_code = SYSTEM_POWER_DOWN;
} else if (code == KB_SYSTEM_SLEEP) {
- host_system_send(SYSTEM_SLEEP);
- host_system_send(0);
- _delay_ms(500);
+ system_code = SYSTEM_SLEEP;
} else if (code == KB_SYSTEM_WAKE) {
- host_system_send(SYSTEM_WAKE_UP);
- host_system_send(0);
- _delay_ms(500);
+ system_code = SYSTEM_WAKE_UP;
}
// Consumer Page
else if (code == KB_AUDIO_MUTE) {
host_send_keyboard_report();
#ifdef EXTRAKEY_ENABLE
host_consumer_send(consumer_code);
+ host_system_send(system_code);
#endif
#ifdef DEBUG_LED
// LED flash for debug
static void mousekey_debug(void)
{
if (!debug_mouse) return;
- print("mousekey[btn|x y v h]: ");
+ print("mousekey [btn|x y v h]rep: [");
phex(report.buttons); print("|");
phex(report.x); print(" ");
phex(report.y); print(" ");
phex(report.v); print(" ");
- phex(report.h);
+ phex(report.h); print("]");
phex(mousekey_repeat);
print("\n");
}
uint8_t mods;
uint8_t rserved;
uint8_t keys[REPORT_KEYS];
-} report_keyboard_t;
+} __attribute__ ((packed)) report_keyboard_t;
typedef struct {
- uint8_t report_id;
uint8_t buttons;
int8_t x;
int8_t y;
int8_t v;
int8_t h;
-} report_mouse_t;
+} __attribute__ ((packed)) report_mouse_t;
#endif
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
adb.c
#NKRO_ENABLE = yes # USB Nkey Rollover
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
-
-dfu: PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
-dfu: program
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
m0110.c
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
news.c
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
ps2.c
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
ps2_usart.c
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
ps2_usart.c
PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBasp 2048
+OPT_DEFS += -DBOOT_SIZE=2048
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/vusb.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap_102.c \
+SRC = keymap_102.c \
matrix.c \
led.c \
ps2.c
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap_122.c \
+SRC = keymap_122.c \
matrix.c \
led.c \
ps2.c
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c \
x68k.c
PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/protocol.mk
+++ /dev/null
-# Target file name (without extension).
-TARGET = hbk
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
- /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
- /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
--- /dev/null
+Makefile.lufa
\ No newline at end of file
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hbkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
--- /dev/null
+# Target file name (without extension).
+TARGET = hbkb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = main.c \
+ keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
+ /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
+ /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBB00
#define MANUFACTURER t.m.k.
+#define DEVICE_VER 0x0100
#define PRODUCT Happy Buckling Keyboard
+
+
#define DESCRIPTION mod version of IBM Model M keyboard
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hhkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = at90usb1286
+#MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c
-CONFIG_H = config_pjrc.h
+CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# Search Path
VPATH = $(TARGET_DIR)
+VPATH = $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
--- /dev/null
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xCAFF
+#define DEVICE_VER 0x0101
+#define MANUFACTURER t.m.k.
+#define PRODUCT HHKB mod
+
+
+#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
+
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+# define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+/* PS/2 mouse */
+#ifdef PS2_MOUSE_ENABLE
+/*
+# define PS2_CLOCK_PORT PORTF
+# define PS2_CLOCK_PIN PINF
+# define PS2_CLOCK_DDR DDRF
+# define PS2_CLOCK_BIT 0
+# define PS2_DATA_PORT PORTF
+# define PS2_DATA_PIN PINF
+# define PS2_DATA_DDR DDRF
+# define PS2_DATA_BIT 1
+*/
+#endif
+
+#endif
+++ /dev/null
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xCAFE
-#define DEVICE_VER 0x0101
-#define MANUFACTURER t.m.k.
-#define PRODUCT HHKB mod
-#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
-
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 192
-#endif
-
-
-/* PS/2 mouse */
-#ifdef PS2_MOUSE_ENABLE
-/*
-# define PS2_CLOCK_PORT PORTF
-# define PS2_CLOCK_PIN PINF
-# define PS2_CLOCK_DDR DDRF
-# define PS2_CLOCK_BIT 0
-# define PS2_DATA_PORT PORTF
-# define PS2_DATA_PIN PINF
-# define PS2_DATA_DDR DDRF
-# define PS2_DATA_BIT 1
-*/
-#endif
-
-#endif
* |Gui |Alt |Space |Alt |xxx|
* `--------------------------------------------'
*/
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
+ KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
// key: on: 0/off: 1
// prev: unknown: output previous key state(negated)?
-#ifdef HOST_PJRC
-// Ports for Teensy
+#if defined(__AVR_AT90USB1286__)
+// Ports for Teensy++
// row: PB0-2
// col: PB3-5,6
// key: PE6(pull-uped)
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
-#else
+
+#elif defined(__AVR_ATmega328P__)
// Ports for V-USB
// key: PB0(pull-uped)
// prev: PB1
DDRC &= ~0x0F; \
PORTC &= ~0x0F; \
} while (0)
+
+#else
+# error "define code for matrix scan"
#endif
+++ /dev/null
-# Target file name (without extension).
-TARGET = macway
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
/* controller configuration */
#include "controller_teensy.h"
+
+/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBEE0
+#define DEVICE_VER 0x0202
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
+
+
+/* message strings */
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
3, // Fn3
4, // Fn4
0, // Fn5
- 2, // Fn6
+ 3, // Fn6
3 // Fn7
};
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
- FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL),
+ FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL),
/* Layer 1: HHKB mode (HHKB Fn)
* | |Gui |Alt | |Alt |Gui| | |Ctr|
* `-----------------------------------------------------------'
*/
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \
- CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \
+ KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \
+ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NLCK,\
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL),
BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \
- FN7, LGUI,LALT,BTN1,RALT,NO, NO, NO, NO),
+ FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO),
/* Layer 4: Matias half keyboard style (Space)
--- /dev/null
+LUFA_DIR = protocol/lufa
+
+# Path to the LUFA library
+LUFA_PATH = $(TOP_DIR)/protocol/lufa/LUFA-120219
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+LUFA_SRC = $(LUFA_DIR)/lufa.c \
+ $(LUFA_DIR)/descriptor.c \
+ $(LUFA_SRC_USB)
+SRC += $(subst $(LUFA_PATH)/,,$(LUFA_SRC))
+
+# Search Path
+VPATH += $(LUFA_PATH)
+
+# Option modules
+#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
+#endif
+
+#ifdef EXTRAKEY_ENABLE
+#endif
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+OPT_DEFS += -DF_USB=$(F_USB)UL
+OPT_DEFS += -DARCH=ARCH_$(ARCH)
+OPT_DEFS += $(LUFA_OPTS)
+OPT_DEFS += -DHOST_LUFA
--- /dev/null
+/*
+ * Copyright 2012 Jun Wako <wakojun@gmail.com>
+ * This file is based on:
+ * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
+ * LUFA-120219/Demos/Device/Lowlevel/GenericHID
+ */
+
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#include "util.h"
+#include "report.h"
+#include "descriptor.h"
+
+
+/*******************************************************************************
+ * HID Report Descriptors
+ ******************************************************************************/
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+{
+ HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+ HID_RI_USAGE(8, 0x06), /* Keyboard */
+ HID_RI_COLLECTION(8, 0x01), /* Application */
+ HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
+ HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
+ HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+ HID_RI_REPORT_COUNT(8, 0x08),
+ HID_RI_REPORT_SIZE(8, 0x01),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+ HID_RI_REPORT_COUNT(8, 0x01),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_INPUT(8, HID_IOF_CONSTANT),
+ HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
+ HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
+ HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
+ HID_RI_REPORT_COUNT(8, 0x05),
+ HID_RI_REPORT_SIZE(8, 0x01),
+ HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+ HID_RI_REPORT_COUNT(8, 0x01),
+ HID_RI_REPORT_SIZE(8, 0x03),
+ HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
+ HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
+ HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
+ HID_RI_USAGE_MAXIMUM(8, 0xFF), /* Keyboard Application */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+ HID_RI_REPORT_COUNT(8, 0x06),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
+ HID_RI_END_COLLECTION(0),
+};
+
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
+{
+ HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+ HID_RI_USAGE(8, 0x02), /* Mouse */
+ HID_RI_COLLECTION(8, 0x01), /* Application */
+ HID_RI_USAGE(8, 0x01), /* Pointer */
+ HID_RI_COLLECTION(8, 0x00), /* Physical */
+
+ HID_RI_USAGE_PAGE(8, 0x09), /* Button */
+ HID_RI_USAGE_MINIMUM(8, 0x01), /* Button 1 */
+ HID_RI_USAGE_MAXIMUM(8, 0x05), /* Button 5 */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+ HID_RI_REPORT_COUNT(8, 0x05),
+ HID_RI_REPORT_SIZE(8, 0x01),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+ HID_RI_REPORT_COUNT(8, 0x01),
+ HID_RI_REPORT_SIZE(8, 0x03),
+ HID_RI_INPUT(8, HID_IOF_CONSTANT),
+
+ HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+ HID_RI_USAGE(8, 0x30), /* Usage X */
+ HID_RI_USAGE(8, 0x31), /* Usage Y */
+ HID_RI_LOGICAL_MINIMUM(8, -127),
+ HID_RI_LOGICAL_MAXIMUM(8, 127),
+ HID_RI_REPORT_COUNT(8, 0x02),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
+
+ HID_RI_USAGE(8, 0x38), /* Wheel */
+ HID_RI_LOGICAL_MINIMUM(8, -127),
+ HID_RI_LOGICAL_MAXIMUM(8, 127),
+ HID_RI_REPORT_COUNT(8, 0x01),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
+
+ HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */
+ HID_RI_USAGE(16, 0x0238), /* AC Pan (Horizontal wheel) */
+ HID_RI_LOGICAL_MINIMUM(8, -127),
+ HID_RI_LOGICAL_MAXIMUM(8, 127),
+ HID_RI_REPORT_COUNT(8, 0x01),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
+
+ HID_RI_END_COLLECTION(0),
+ HID_RI_END_COLLECTION(0),
+};
+
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM ConsoleReport[] =
+{
+ HID_RI_USAGE_PAGE(16, 0xFF31), /* Vendor Page(PJRC Teensy compatible) */
+ HID_RI_USAGE(8, 0x74), /* Vendor Usage(PJRC Teensy compatible) */
+ HID_RI_COLLECTION(8, 0x01), /* Application */
+ HID_RI_USAGE(8, 0x75), /* Vendor Usage 0x75 */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+ HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+ HID_RI_USAGE(8, 0x76), /* Vendor Usage 0x76 */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+ HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE),
+ HID_RI_REPORT_SIZE(8, 0x08),
+ HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+ HID_RI_END_COLLECTION(0),
+};
+
+#ifdef EXTRAKEY_ENABLE
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtraReport[] =
+{
+ HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+ HID_RI_USAGE(8, 0x80), /* System Control */
+ HID_RI_COLLECTION(8, 0x01), /* Application */
+ HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM),
+ HID_RI_LOGICAL_MINIMUM(16, 0x0081),
+ HID_RI_LOGICAL_MAXIMUM(16, 0x00B7),
+ HID_RI_USAGE_MINIMUM(16, 0x0081), /* System Power Down */
+ HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */
+ HID_RI_REPORT_SIZE(8, 16),
+ HID_RI_REPORT_COUNT(8, 1),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
+ HID_RI_END_COLLECTION(0),
+
+ HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */
+ HID_RI_USAGE(8, 0x01), /* Consumer Control */
+ HID_RI_COLLECTION(8, 0x01), /* Application */
+ HID_RI_REPORT_ID(8, REPORT_ID_CONSUMER),
+ HID_RI_LOGICAL_MINIMUM(16, 0x0010),
+ HID_RI_LOGICAL_MAXIMUM(16, 0x029C),
+ HID_RI_USAGE_MINIMUM(16, 0x0010), /* +10 */
+ HID_RI_USAGE_MAXIMUM(16, 0x029C), /* AC Distribute Vertically */
+ HID_RI_REPORT_SIZE(8, 16),
+ HID_RI_REPORT_COUNT(8, 1),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
+ HID_RI_END_COLLECTION(0),
+};
+#endif
+
+#ifdef NKRO_ENABLE
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM NKROReport[] =
+{
+ HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
+ HID_RI_USAGE(8, 0x06), /* Keyboard */
+ HID_RI_COLLECTION(8, 0x01), /* Application */
+ HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
+ HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
+ HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+ HID_RI_REPORT_COUNT(8, 0x08),
+ HID_RI_REPORT_SIZE(8, 0x01),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+
+ HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
+ HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
+ HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
+ HID_RI_REPORT_COUNT(8, 0x05),
+ HID_RI_REPORT_SIZE(8, 0x01),
+ HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
+ HID_RI_REPORT_COUNT(8, 0x01),
+ HID_RI_REPORT_SIZE(8, 0x03),
+ HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
+
+ HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
+ HID_RI_USAGE_MINIMUM(8, 0x00), /* Keyboard 0 */
+ HID_RI_USAGE_MAXIMUM(8, NKRO_SIZE*8-1), /* Keyboard Right GUI */
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+ HID_RI_REPORT_COUNT(8, NKRO_SIZE*8),
+ HID_RI_REPORT_SIZE(8, 0x01),
+};
+#endif
+
+/*******************************************************************************
+ * Device Descriptors
+ ******************************************************************************/
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+ .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+ .USBSpecification = VERSION_BCD(01.10),
+ .Class = USB_CSCP_NoDeviceClass,
+ .SubClass = USB_CSCP_NoDeviceSubclass,
+ .Protocol = USB_CSCP_NoDeviceProtocol,
+
+ .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
+
+ .VendorID = VENDOR_ID,
+ .ProductID = PRODUCT_ID,
+ .ReleaseNumber = DEVICE_VER,
+
+ .ManufacturerStrIndex = 0x01,
+ .ProductStrIndex = 0x02,
+ .SerialNumStrIndex = NO_DESCRIPTOR,
+
+ .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/*******************************************************************************
+ * Configuration Descriptors
+ ******************************************************************************/
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+ .Config =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+ .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+ .TotalInterfaces = TOTAL_INTERFACES,
+
+ .ConfigurationNumber = 1,
+ .ConfigurationStrIndex = NO_DESCRIPTOR,
+
+ .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_REMOTEWAKEUP),
+
+ .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
+ },
+
+ /*
+ * Keyboard
+ */
+ .Keyboard_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = KEYBOARD_INTERFACE,
+ .AlternateSetting = 0x00,
+
+ .TotalEndpoints = 1,
+
+ .Class = HID_CSCP_HIDClass,
+ .SubClass = HID_CSCP_BootSubclass,
+ .Protocol = HID_CSCP_KeyboardBootProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .Keyboard_HID =
+ {
+ .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+ .HIDSpec = VERSION_BCD(01.11),
+ .CountryCode = 0x00,
+ .TotalReportDescriptors = 1,
+ .HIDReportType = HID_DTYPE_Report,
+ .HIDReportLength = sizeof(KeyboardReport)
+ },
+
+ .Keyboard_INEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = KEYBOARD_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+
+ /*
+ * Mouse
+ */
+#ifdef MOUSE_ENABLE
+ .Mouse_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = MOUSE_INTERFACE,
+ .AlternateSetting = 0x00,
+
+ .TotalEndpoints = 1,
+
+ .Class = HID_CSCP_HIDClass,
+ .SubClass = HID_CSCP_BootSubclass,
+ .Protocol = HID_CSCP_MouseBootProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .Mouse_HID =
+ {
+ .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+ .HIDSpec = VERSION_BCD(01.11),
+ .CountryCode = 0x00,
+ .TotalReportDescriptors = 1,
+ .HIDReportType = HID_DTYPE_Report,
+ .HIDReportLength = sizeof(MouseReport)
+ },
+
+ .Mouse_INEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = MOUSE_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+#endif
+
+ /*
+ * Console
+ */
+ .Console_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = CONSOLE_INTERFACE,
+ .AlternateSetting = 0x00,
+
+ .TotalEndpoints = 2,
+
+ .Class = HID_CSCP_HIDClass,
+ .SubClass = HID_CSCP_NonBootSubclass,
+ .Protocol = HID_CSCP_NonBootProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .Console_HID =
+ {
+ .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+ .HIDSpec = VERSION_BCD(01.11),
+ .CountryCode = 0x00,
+ .TotalReportDescriptors = 1,
+ .HIDReportType = HID_DTYPE_Report,
+ .HIDReportLength = sizeof(ConsoleReport)
+ },
+
+ .Console_INEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | CONSOLE_IN_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CONSOLE_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+
+ .Console_OUTEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_OUT | CONSOLE_OUT_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CONSOLE_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+
+ /*
+ * Extra
+ */
+#ifdef EXTRAKEY_ENABLE
+ .Extra_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = EXTRA_INTERFACE,
+ .AlternateSetting = 0x00,
+
+ .TotalEndpoints = 1,
+
+ .Class = HID_CSCP_HIDClass,
+ .SubClass = HID_CSCP_NonBootSubclass,
+ .Protocol = HID_CSCP_NonBootProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .Extra_HID =
+ {
+ .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
+
+ .HIDSpec = VERSION_BCD(01.11),
+ .CountryCode = 0x00,
+ .TotalReportDescriptors = 1,
+ .HIDReportType = HID_DTYPE_Report,
+ .HIDReportLength = sizeof(ExtraReport)
+ },
+
+ .Extra_INEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | EXTRA_IN_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = EXTRA_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+#endif
+};
+
+
+/*******************************************************************************
+ * String Descriptors
+ ******************************************************************************/
+const USB_Descriptor_String_t PROGMEM LanguageString =
+{
+ .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+ .UnicodeString = {LANGUAGE_ID_ENG}
+};
+
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+ .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+ .UnicodeString = LSTR(MANUFACTURER)
+};
+
+const USB_Descriptor_String_t PROGMEM ProductString =
+{
+ .Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String},
+
+ .UnicodeString = LSTR(PRODUCT)
+};
+
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ * documentation) by the application code so that the address and size of a requested descriptor can be given
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ * USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ const void** const DescriptorAddress)
+{
+ const uint8_t DescriptorType = (wValue >> 8);
+ const uint8_t DescriptorIndex = (wValue & 0xFF);
+
+ const void* Address = NULL;
+ uint16_t Size = NO_DESCRIPTOR;
+
+ switch (DescriptorType)
+ {
+ case DTYPE_Device:
+ Address = &DeviceDescriptor;
+ Size = sizeof(USB_Descriptor_Device_t);
+ break;
+ case DTYPE_Configuration:
+ Address = &ConfigurationDescriptor;
+ Size = sizeof(USB_Descriptor_Configuration_t);
+ break;
+ case DTYPE_String:
+ switch (DescriptorIndex )
+ {
+ case 0x00:
+ Address = &LanguageString;
+ Size = pgm_read_byte(&LanguageString.Header.Size);
+ break;
+ case 0x01:
+ Address = &ManufacturerString;
+ Size = pgm_read_byte(&ManufacturerString.Header.Size);
+ break;
+ case 0x02:
+ Address = &ProductString;
+ Size = pgm_read_byte(&ProductString.Header.Size);
+ break;
+ }
+ break;
+ case HID_DTYPE_HID:
+ switch (wIndex) {
+ case KEYBOARD_INTERFACE:
+ Address = &ConfigurationDescriptor.Keyboard_HID;
+ Size = sizeof(USB_HID_Descriptor_HID_t);
+ break;
+#ifdef MOUSE_ENABLE
+ case MOUSE_INTERFACE:
+ Address = &ConfigurationDescriptor.Mouse_HID;
+ Size = sizeof(USB_HID_Descriptor_HID_t);
+ break;
+#endif
+ case CONSOLE_INTERFACE:
+ Address = &ConfigurationDescriptor.Console_HID;
+ Size = sizeof(USB_HID_Descriptor_HID_t);
+ break;
+#ifdef EXTRAKEY_ENABLE
+ case EXTRA_INTERFACE:
+ Address = &ConfigurationDescriptor.Extra_HID;
+ Size = sizeof(USB_HID_Descriptor_HID_t);
+ break;
+#endif
+ }
+ break;
+ case HID_DTYPE_Report:
+ switch (wIndex) {
+ case KEYBOARD_INTERFACE:
+ Address = &KeyboardReport;
+ Size = sizeof(KeyboardReport);
+ break;
+#ifdef MOUSE_ENABLE
+ case MOUSE_INTERFACE:
+ Address = &MouseReport;
+ Size = sizeof(MouseReport);
+ break;
+#endif
+ case CONSOLE_INTERFACE:
+ Address = &ConsoleReport;
+ Size = sizeof(ConsoleReport);
+ break;
+#ifdef EXTRAKEY_ENABLE
+ case EXTRA_INTERFACE:
+ Address = &ExtraReport;
+ Size = sizeof(ExtraReport);
+ break;
+#endif
+ }
+ break;
+ }
+
+ *DescriptorAddress = Address;
+ return Size;
+}
--- /dev/null
+/*
+ * Copyright 2012 Jun Wako <wakojun@gmail.com>
+ * This file is based on:
+ * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
+ * LUFA-120219/Demos/Device/Lowlevel/GenericHID
+ */
+
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+#include <LUFA/Drivers/USB/USB.h>
+#include <avr/pgmspace.h>
+
+
+typedef struct
+{
+ USB_Descriptor_Configuration_Header_t Config;
+
+ // Keyboard HID Interface
+ USB_Descriptor_Interface_t Keyboard_Interface;
+ USB_HID_Descriptor_HID_t Keyboard_HID;
+ USB_Descriptor_Endpoint_t Keyboard_INEndpoint;
+
+ // Mouse HID Interface
+#ifdef MOUSE_ENABLE
+ USB_Descriptor_Interface_t Mouse_Interface;
+ USB_HID_Descriptor_HID_t Mouse_HID;
+ USB_Descriptor_Endpoint_t Mouse_INEndpoint;
+#endif
+
+ // Console HID Interface
+ USB_Descriptor_Interface_t Console_Interface;
+ USB_HID_Descriptor_HID_t Console_HID;
+ USB_Descriptor_Endpoint_t Console_INEndpoint;
+ USB_Descriptor_Endpoint_t Console_OUTEndpoint;
+
+ // Extra HID Interface
+#ifdef EXTRAKEY_ENABLE
+ USB_Descriptor_Interface_t Extra_Interface;
+ USB_HID_Descriptor_HID_t Extra_HID;
+ USB_Descriptor_Endpoint_t Extra_INEndpoint;
+#endif
+} USB_Descriptor_Configuration_t;
+
+
+/* index of interface */
+#define KEYBOARD_INTERFACE 0
+
+#ifdef MOUSE_ENABLE
+# define MOUSE_INTERFACE (KEYBOARD_INTERFACE + 1)
+#else
+# define MOUSE_INTERFACE KEYBOARD_INTERFACE
+#endif
+
+#ifdef EXTRAKEY_ENABLE
+# define EXTRA_INTERFACE (MOUSE_INTERFACE + 1)
+#else
+# define EXTRA_INTERFACE MOUSE_INTERFACE
+#endif
+
+#define CONSOLE_INTERFACE (EXTRA_INTERFACE + 1)
+
+
+/* nubmer of interfaces */
+#define TOTAL_INTERFACES (CONSOLE_INTERFACE + 1)
+
+
+// Endopoint number and size
+#define KEYBOARD_IN_EPNUM 1
+#define MOUSE_IN_EPNUM 2
+#define CONSOLE_IN_EPNUM 3
+#define CONSOLE_OUT_EPNUM 4
+#define EXTRA_IN_EPNUM 5
+
+#define KEYBOARD_EPSIZE 8
+#define MOUSE_EPSIZE 8
+#define CONSOLE_EPSIZE 8
+#define EXTRA_EPSIZE 8
+
+
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ const void** const DescriptorAddress)
+ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
--- /dev/null
+/*
+ * Copyright 2012 Jun Wako <wakojun@gmail.com>
+ * This file is based on:
+ * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
+ * LUFA-120219/Demos/Device/Lowlevel/GenericHID
+ */
+
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#include "report.h"
+#include "host.h"
+#include "host_driver.h"
+#include "keyboard.h"
+#include "sendchar.h"
+#include "debug.h"
+
+#include "descriptor.h"
+#include "lufa.h"
+
+static uint8_t idle_duration = 0;
+static uint8_t protocol_report = 1;
+static uint8_t keyboard_led_stats = 0;
+
+static report_keyboard_t keyboard_report_sent;
+
+
+/* Host driver */
+static uint8_t keyboard_leds(void);
+static void send_keyboard(report_keyboard_t *report);
+static void send_mouse(report_mouse_t *report);
+static void send_system(uint16_t data);
+static void send_consumer(uint16_t data);
+static host_driver_t lufa_driver = {
+ keyboard_leds,
+ send_keyboard,
+ send_mouse,
+ send_system,
+ send_consumer
+};
+
+
+static void SetupHardware(void);
+static void Console_HID_Task(void);
+
+int main(void)
+{
+ SetupHardware();
+ sei();
+
+ print_enable = true;
+ debug_enable = true;
+ debug_matrix = true;
+ debug_keyboard = true;
+ debug_mouse = true;
+
+ // TODO: can't print here
+ debug("LUFA init\n");
+
+ keyboard_init();
+ host_set_driver(&lufa_driver);
+ while (1) {
+ keyboard_proc();
+
+ Console_HID_Task();
+ USB_USBTask();
+ }
+}
+
+void SetupHardware(void)
+{
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Disable clock division */
+ clock_prescale_set(clock_div_1);
+
+ USB_Init();
+}
+
+static void Console_HID_Task(void)
+{
+ /* Device must be connected and configured for the task to run */
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return;
+
+ // TODO: impl receivechar()/recvchar()
+ Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
+
+ /* Check to see if a packet has been sent from the host */
+ if (Endpoint_IsOUTReceived())
+ {
+ /* Check to see if the packet contains data */
+ if (Endpoint_IsReadWriteAllowed())
+ {
+ /* Create a temporary buffer to hold the read in report from the host */
+ uint8_t ConsoleData[CONSOLE_EPSIZE];
+
+ /* Read Console Report Data */
+ Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
+
+ /* Process Console Report Data */
+ //ProcessConsoleHIDReport(ConsoleData);
+ }
+
+ /* Finalize the stream transfer to send the last packet */
+ Endpoint_ClearOUT();
+ }
+
+ /* IN packet */
+ Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
+ // send IN packet
+ if (Endpoint_IsINReady())
+ Endpoint_ClearIN();
+}
+
+
+/*******************************************************************************
+ * USB Events
+ ******************************************************************************/
+/** Event handler for the USB_Connect event. */
+void EVENT_USB_Device_Connect(void)
+{
+}
+
+/** Event handler for the USB_Disconnect event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+}
+
+/** Event handler for the USB_ConfigurationChanged event.
+ * This is fired when the host sets the current configuration of the USB device after enumeration.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+ bool ConfigSuccess = true;
+
+ /* Setup Keyboard HID Report Endpoints */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
+ KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
+
+#ifdef MOUSE_ENABLE
+ /* Setup Mouse HID Report Endpoint */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
+ MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
+
+#ifdef EXTRAKEY_ENABLE
+ /* Setup Extra HID Report Endpoint */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(EXTRA_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
+ EXTRA_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
+
+ /* Setup Console HID Report Endpoints */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
+ CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
+ CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
+}
+
+/*
+Appendix G: HID Request Support Requirements
+
+The following table enumerates the requests that need to be supported by various types of HID class devices.
+
+Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
+------------------------------------------------------------------------------------------
+Boot Mouse Required Optional Optional Optional Required Required
+Non-Boot Mouse Required Optional Optional Optional Optional Optional
+Boot Keyboard Required Optional Required Required Required Required
+Non-Boot Keybrd Required Optional Required Required Optional Optional
+Other Device Required Optional Optional Optional Optional Optional
+*/
+/** Event handler for the USB_ControlRequest event.
+ * This is fired before passing along unhandled control requests to the library for processing internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+ uint8_t* ReportData = NULL;
+ uint8_t ReportSize = 0;
+
+ /* Handle HID Class specific requests */
+ switch (USB_ControlRequest.bRequest)
+ {
+ case HID_REQ_GetReport:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+
+ // Interface
+ switch (USB_ControlRequest.wIndex) {
+ case KEYBOARD_INTERFACE:
+ // TODO: test/check
+ ReportData = (uint8_t*)&keyboard_report_sent;
+ ReportSize = sizeof(keyboard_report_sent);
+ break;
+ }
+
+ /* Write the report data to the control endpoint */
+ Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
+ Endpoint_ClearOUT();
+ }
+
+ break;
+ case HID_REQ_SetReport:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+
+ // Interface
+ switch (USB_ControlRequest.wIndex) {
+ case KEYBOARD_INTERFACE:
+ Endpoint_ClearSETUP();
+
+ while (!(Endpoint_IsOUTReceived())) {
+ if (USB_DeviceState == DEVICE_STATE_Unattached)
+ return;
+ }
+ keyboard_led_stats = Endpoint_Read_8();
+
+ Endpoint_ClearOUT();
+ Endpoint_ClearStatusStage();
+ break;
+ }
+
+ }
+
+ break;
+
+ case HID_REQ_GetProtocol:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+ while (!(Endpoint_IsINReady()));
+ Endpoint_Write_8(protocol_report);
+ Endpoint_ClearIN();
+ Endpoint_ClearStatusStage();
+ }
+
+ break;
+ case HID_REQ_SetProtocol:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+ Endpoint_ClearStatusStage();
+
+ protocol_report = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
+ }
+
+ break;
+ case HID_REQ_SetIdle:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+ Endpoint_ClearStatusStage();
+
+ idle_duration = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
+ }
+
+ break;
+ case HID_REQ_GetIdle:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+ while (!(Endpoint_IsINReady()));
+ Endpoint_Write_8(idle_duration);
+ Endpoint_ClearIN();
+ Endpoint_ClearStatusStage();
+ }
+
+ break;
+ }
+}
+
+/*******************************************************************************
+ * Host driver
+ ******************************************************************************/
+static uint8_t keyboard_leds(void)
+{
+ return keyboard_led_stats;
+}
+
+static void send_keyboard(report_keyboard_t *report)
+{
+ // TODO: handle NKRO report
+ /* Select the Keyboard Report Endpoint */
+ Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
+
+ /* Check if Keyboard Endpoint Ready for Read/Write */
+ if (Endpoint_IsReadWriteAllowed())
+ {
+ /* Write Keyboard Report Data */
+ Endpoint_Write_Stream_LE(report, sizeof(report_keyboard_t), NULL);
+
+ /* Finalize the stream transfer to send the last packet */
+ Endpoint_ClearIN();
+ }
+ keyboard_report_sent = *report;
+}
+
+static void send_mouse(report_mouse_t *report)
+{
+#ifdef MOUSE_ENABLE
+ /* Select the Mouse Report Endpoint */
+ Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
+
+ /* Check if Mouse Endpoint Ready for Read/Write */
+ if (Endpoint_IsReadWriteAllowed())
+ {
+ /* Write Mouse Report Data */
+ Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
+
+ /* Finalize the stream transfer to send the last packet */
+ Endpoint_ClearIN();
+ }
+#endif
+}
+
+static void send_system(uint16_t data)
+{
+ report_extra_t r = {
+ .report_id = REPORT_ID_SYSTEM,
+ .usage = data
+ };
+ Endpoint_SelectEndpoint(EXTRA_IN_EPNUM);
+ if (Endpoint_IsReadWriteAllowed()) {
+ Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
+ Endpoint_ClearIN();
+ }
+}
+
+static void send_consumer(uint16_t data)
+{
+ report_extra_t r = {
+ .report_id = REPORT_ID_CONSUMER,
+ .usage = data
+ };
+ Endpoint_SelectEndpoint(EXTRA_IN_EPNUM);
+ if (Endpoint_IsReadWriteAllowed()) {
+ Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
+ Endpoint_ClearIN();
+ }
+}
+
+
+/*******************************************************************************
+ * sendchar
+ ******************************************************************************/
+int8_t sendchar(uint8_t c)
+{
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return -1;
+
+ Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
+
+ uint8_t timeout = 10;
+ uint16_t prevFN = USB_Device_GetFrameNumber();
+ while (!Endpoint_IsINReady()) {
+ switch (USB_DeviceState) {
+ case DEVICE_STATE_Unattached:
+ case DEVICE_STATE_Suspended:
+ return -1;
+ }
+ if (Endpoint_IsStalled())
+ return -1;
+ if (prevFN != USB_Device_GetFrameNumber()) {
+ if (!(timeout--))
+ return -1;
+ prevFN = USB_Device_GetFrameNumber();
+ }
+ }
+
+ Endpoint_Write_8(c);
+
+ // send when packet is full
+ if (!Endpoint_IsReadWriteAllowed())
+ Endpoint_ClearIN();
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2012 Jun Wako <wakojun@gmail.com>
+ * This file is based on:
+ * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
+ * LUFA-120219/Demos/Device/Lowlevel/GenericHID
+ */
+
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#ifndef _LUFA_H_
+#define _LUFA_H_
+
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <stdbool.h>
+#include <string.h>
+#include <LUFA/Version.h>
+#include <LUFA/Drivers/USB/USB.h>
+
+
+/* extra report structure */
+typedef struct {
+ uint8_t report_id;
+ uint16_t usage;
+} __attribute__ ((packed)) report_extra_t;
+
+#endif
-OPT_DEFS += -DHOST_PJRC
-
-SRC += pjrc.c \
- usb_keyboard.c \
- usb_debug.c \
- usb.c \
- bootloader_teensy.c
+PJRC_DIR = protocol/pjrc
+OPT_DEFS += -DHOST_PJRC
-# Search Path
-VPATH += $(TOP_DIR)/protocol/pjrc
-
+SRC += $(PJRC_DIR)/main.c \
+ $(PJRC_DIR)/pjrc.c \
+ $(PJRC_DIR)/usb_keyboard.c \
+ $(PJRC_DIR)/usb_debug.c \
+ $(PJRC_DIR)/usb.c
# Option modules
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
- SRC += usb_mouse.c
+ SRC += $(PJRC_DIR)/usb_mouse.c
endif
ifdef EXTRAKEY_ENABLE
- SRC += usb_extra.c
+ SRC += $(PJRC_DIR)/usb_extra.c
endif
+
+# Search Path
+VPATH += $(TOP_DIR)/$(PJRC_DIR)
+++ /dev/null
-/* See http://www.pjrc.com/teensy/jump_to_bootloader.html */
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "bootloader.h"
-
-void bootloader_jump(void) {
- cli();
- // disable watchdog, if enabled
- // disable all peripherals
- UDCON = 1;
- USBCON = (1<<FRZCLK); // disable USB
- UCSR1B = 0;
- _delay_ms(5);
-#if defined(__AVR_AT90USB162__) // Teensy 1.0
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
- TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
- DDRB = 0; DDRC = 0; DDRD = 0;
- PORTB = 0; PORTC = 0; PORTD = 0;
- asm volatile("jmp 0x3E00");
-#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
- DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
- PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
- asm volatile("jmp 0x7E00");
-#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
- DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
- PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
- asm volatile("jmp 0xFC00");
-#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
- EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
- DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
- PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
- asm volatile("jmp 0x1FC00");
-#endif
-}
+VUSB_DIR = protocol/vusb
+
OPT_DEFS += -DHOST_VUSB
-SRC += vusb.c \
- usbdrv.c \
- usbdrvasm.S \
- oddebug.c \
- bootloader_usbasp.c \
+SRC += $(VUSB_DIR)/main.c \
+ $(VUSB_DIR)/vusb.c \
+ $(VUSB_DIR)/usbdrv/usbdrv.c \
+ $(VUSB_DIR)/usbdrv/usbdrvasm.S \
+ $(VUSB_DIR)/usbdrv/oddebug.c
ifdef NO_UART
+++ /dev/null
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "bootloader.h"
-
-
-void bootloader_jump(void) {
- cli();
- // This makes custom USBasploader come up.
- MCUSR = 0;
-
- // ATmega168PA
- // initialize ports
- PORTB = 0; PORTC= 0; PORTD = 0;
- DDRB = 0; DDRC= 0; DDRD = 0;
-
- // disable interrupts
- EIMSK = 0; EECR = 0; SPCR = 0;
- ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0;
- TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0;
- ADCSRA = 0; TWCR = 0; UCSR0B = 0;
-
- // Boot Loader Section Start Address:
- // BOOTSZ Size Address
- // (lock bit) (word) (word) (byte)
- // '11' 128 0x1F80 0x3F00
- // '10' 256 0x1F00 0x3E00
- // '01' 512 0x1E00 0x3C00
- // '00' 1024 0x1C00 0x3800
- asm volatile("jmp 0x3800");
-}
}
}
#endif
- if (!suspended)
+ if (!suspended) {
usbPoll();
- keyboard_proc();
- if (!suspended)
+
+ // TODO: configuration process is incosistent. it sometime fails.
+ // To prevent failing to configure NOT scan keyboard during configuration
+ if (usbConfiguration && usbInterruptIsReady()) {
+ keyboard_proc();
+ }
vusb_transfer_keyboard();
+ }
}
}
}
+typedef struct {
+ uint8_t report_id;
+ report_mouse_t report;
+} __attribute__ ((packed)) vusb_mouse_report_t;
+
static void send_mouse(report_mouse_t *report)
{
- report->report_id = REPORT_ID_MOUSE;
+ vusb_mouse_report_t r = {
+ .report_id = REPORT_ID_MOUSE,
+ .report = *report
+ };
if (usbInterruptIsReady3()) {
- usbSetInterrupt3((void *)report, sizeof(*report));
+ usbSetInterrupt3((void *)&r, sizeof(vusb_mouse_report_t));
}
}
+
+typedef struct {
+ uint8_t report_id;
+ uint16_t usage;
+} __attribute__ ((packed)) report_extra_t;
+
static void send_system(uint16_t data)
{
- // Not need static?
- static uint8_t report[] = { REPORT_ID_SYSTEM, 0, 0 };
- report[1] = data&0xFF;
- report[2] = (data>>8)&0xFF;
+ static uint16_t last_data = 0;
+ if (data == last_data) return;
+ last_data = data;
+
+ report_extra_t report = {
+ .report_id = REPORT_ID_SYSTEM,
+ .usage = data
+ };
if (usbInterruptIsReady3()) {
usbSetInterrupt3((void *)&report, sizeof(report));
}
if (data == last_data) return;
last_data = data;
- // Not need static?
- static uint8_t report[] = { REPORT_ID_CONSUMER, 0, 0 };
- report[1] = data&0xFF;
- report[2] = (data>>8)&0xFF;
+ report_extra_t report = {
+ .report_id = REPORT_ID_CONSUMER,
+ .usage = data
+ };
if (usbInterruptIsReady3()) {
usbSetInterrupt3((void *)&report, sizeof(report));
}
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
#CFLAGS += -mshort-calls
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
#
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-#LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
program: $(TARGET).hex $(TARGET).eep
$(PROGRAM_CMD)
+teensy: $(TARGET).hex
+ teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+flip: $(TARGET).hex
+ batchisp -hardware usb -device $(MCU) -operation erase f
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+ dfu-programmer $(MCU) erase
+ dfu-programmer $(MCU) flash $(TARGET).hex
+ dfu-programmer $(MCU) reset
+
+dfu-start:
+ dfu-programmer $(MCU) reset
+ dfu-programmer $(MCU) start
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+ $(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+ dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
+ mkdir -p $(@D)
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
$(REMOVE) $(OBJ:.o=.s)
$(REMOVE) $(OBJ:.o=.i)
$(REMOVE) -r .dep
- $(REMOVEDIR) $(OBJDIR)
+ $(REMOVE) -r $(OBJDIR)
+
+show_path:
+ @echo VPATH=$(VPATH)
+ @echo SRC=$(SRC)
# Create object files directory
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
-clean clean_list program debug gdb-config
-
+clean clean_list debug gdb-config show_path \
+program teensy dfu flip dfu-ee flip-ee dfu-start
projects / qmk_firmware.git / commitdiff