VOLUME /qmk
WORKDIR /qmk
-CMD make clean; make;
+CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}
"hints",
"page-toc",
"terminal",
- "toolbar"
+ "toolbar",
+ "bulk-redirect"
],
"pluginsConfig": {
"edit-link": {
"url": "https://github.com/qmk/qmk_firmware"
}
]
+ },
+ "bulk-redirect": {
+ "basepath": "/",
+ "redirectsFile": "docs/redirects.json"
}
},
"root": "./docs/"
--- /dev/null
+{
+ "redirects": [
+ {
+ "from": "build_environment_setup.html",
+ "to": "getting_started_build_tools.html"
+ },
+ {
+ "from": "make_instructions.html",
+ "to": "getting_started_make_guide.html"
+ }
+ ]
+}
\ No newline at end of file
## Configuring QMK for Steno
-Firstly, enable steno in your keymap's Makefile. You should also diable mousekeys to prevent conflicts.
+Firstly, enable steno in your keymap's Makefile. You may also need disable mousekeys, extra keys, or another USB endpoint to prevent conflicts. The builtin USB stack for some processors only supports a certain number of USB endpoints and the virtual serial port needed for steno fills 3 of them.
```Makefile
STENO_ENABLE = yes
A 60% keyboard.
-Keyboard Maintainer: QMK Community
-Hardware Supported: AMJ60
-Hardware Availability: https://geekhack.org/index.php?topic=77636.0
+Keyboard Maintainer: QMK Community
+Hardware Supported: AMJ60
+Hardware Availability: https://geekhack.org/index.php?topic=77636.0
Make example for this keyboard (after setting up your build environment):
A DIY Keypad Kit
-Keyboard Maintainer: QMK Community
-Hardware Supported: AMJ Pad
-Hardware Availability: https://geekhack.org/index.php?topic=83546.0
+Keyboard Maintainer: QMK Community
+Hardware Supported: AMJ Pad
+Hardware Availability: https://geekhack.org/index.php?topic=83546.0
Make example for this keyboard (after setting up your build environment):
USB to USB keyboard protocol converter
======================================
-Original code from Hasu's TMK firmware. Ported to QMK by Coloneljesus.
+A small device to connect between your USB keyboard and your PC that makes (almost) every keyboard fully programmable.
+Original code from the [TMK firmware](https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb). Ported to QMK by [Balz Guenat](https://github.com/BalzGuenat).
-This port has been tested only on the Pro Micro variant described in the next section.
+Keyboard Maintainer: [Balz Guenat](https://github.com/BalzGuenat)
+Hardware Supported: [Hasu's USB-USB converter](https://geekhack.org/index.php?topic=69169.0), [Pro Micro + USB Host Shield](https://geekhack.org/index.php?topic=80421.0), maybe more
+Hardware Availability: [GH thread](https://geekhack.org/index.php?topic=72052.0), self-built
-See for detail and discussion.
-https://geekhack.org/index.php?topic=69169.0
+Make example for this keyboard (after setting up your build environment):
+ make converter-usb_usb-default
-Hardware requirement
---------------------
-There are two options.
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-### TMK USB-USB Converter
-You can buy a fully assembled converter from me here.
+Troubleshooting & Known Issues
+------------------------------
+The Pro Micro variant runs at 8MHz, hence the following line in `usb_usb/rules.mk`:
+`F_CPU ?= 8000000`
+If the firmware doesn't work, try changing that line to
+`F_CPU ?= 16000000`
+or override the `F_CPU` variable in the `rules.mk` of your keymap.
- https://geekhack.org/index.php?topic=69169.0
+Getting the Hardware
+--------------------
+There are two options to get a converter: You can buy one from Hasu or build one yourself.
-### Arduino Leonardo + Circuit@Home USB Host Shield 2.0
-Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be better, you won't need even soldering iron.
+### Buy a Converter
+You can buy a fully assembled converter from me here:
+https://geekhack.org/index.php?topic=69169.0
- http://arduino.cc/en/Main/ArduinoBoardLeonardo
- https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino-assembled/
+### Build one yourself using Arduino Leonardo + Circuit@Home USB Host Shield 2.0
+Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be better, you won't need even soldering iron.
+http://arduino.cc/en/Main/ArduinoBoardLeonardo
+https://www.circuitsathome.com/arduino_usb_host_shield_projects/
Other compatible boards like Arduino's Shield will also work well but I think Sparkfun's needs to be modified.
-
- http://arduino.cc/en/Main/ArduinoUSBHostShield
- https://www.sparkfun.com/products/9947
+http://arduino.cc/en/Main/ArduinoUSBHostShield
+https://www.sparkfun.com/products/9947
Also Pro Micro 3.3V(not Mini) or Teensy with mini host shield will work with some fixes on signal/power routing.
+[Build guide](https://geekhack.org/index.php?topic=80421.0)
+https://www.circuitsathome.com/arduino_usb_host_shield_projects/
+https://www.sparkfun.com/products/12587
+https://www.pjrc.com/teensy/td_libs_USBHostShield.html
- https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini
- https://www.sparkfun.com/products/12587
- https://www.pjrc.com/teensy/td_libs_USBHostShield.html
-
-
-
-Build firmware
---------------
-Follow normal QMK build instructions to get a binary file. Flashing depends on you hardware.
-
-Limitation
+Limitations
----------
Only supports 'HID Boot protocol'.
-
Note that the converter can host only USB "boot protocol" keyboard(6KRO), not NKRO, it is possible to support NKRO keyboard but you will need to write HID report parser for that. Every NKRO keyboard can have different HID report and it is difficult to support all kind of NKRO keyboards in the market.
-
-
-Keymap editor
--------------
-You can editor keymap and download firmware with web brwoser.
-
-- http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?usb_usb
-
-
-
-Update
-------
-2014/12/11 Added Hub support(confirmed with HHKB pro2)
-2016/09/10 Unimap editor support
-2016/10/18 Fix LED state at startup
-2017/08/16 Port to QMK
-
-
-Resource
+Resources
--------
-USB Host Sheild 2.0
- https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino
- https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini
-USB Host Sheild 2.0 source
+Hasu's main thread for the converter
+ https://geekhack.org/index.php?topic=69169.0
+Build guide for the Pro Micro variant
+ https://geekhack.org/index.php?topic=80421.0
+Original TMK version of the converter
+ https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb
+USB Host Shield 2.0
+ https://www.circuitsathome.com/arduino_usb_host_shield_projects/
+USB Host Shield 2.0 source
https://github.com/felis/USB_Host_Shield_2.0
-Arduino USB Host Shield(with bootst converter)
+Arduino USB Host Shield (with bootst converter)
http://arduino.cc/en/Main/ArduinoUSBHostShield
Arduino source
- https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}
+ https://github.com/arduino/Arduino
Initial release of TMK USB-USB converter
https://geekhack.org/index.php?topic=33057.msg653549#msg653549
http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html#p74854
--- /dev/null
+
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+// Default ECO Layout
+// KLE here : http://www.keyboard-layout-editor.com/#/gists/0733eca6b4cb88ff9d7de746803f4039
+
+#include "eco.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 2
+#define _FN2 3
+
+enum eco_keycodes {
+ QWERTY = SAFE_RANGE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | Enter| \ |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| Up | Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI | Alt | Del | FN1 | FN1 | Space| Space| FN2 | FN2 | Ctrl | Left | Down | Right|
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSLS,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL,
+ KC_LCTL, KC_LGUI,KC_LALT, KC_DEL, MO(_FN1), MO(_FN1), KC_SPC, KC_SPC, MO(_FN2), MO(_FN2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+/* FN1
+ * ,-------------------------------------------------------------------------------------------------.
+ * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |caltde| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | RESET|
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FN1] = KEYMAP(
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_PLUS, _______,
+ CALTDEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET
+),
+
+/* Raise
+ * ,-------------------------------------------------------------------------------------------------.
+ * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Taskmg| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FN2] = KEYMAP(
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______,
+ TSKMGR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistant_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
+
--- /dev/null
+# ECO Default Layout by u/That-Canadian
+
+KLE here : http://www.keyboard-layout-editor.com/#/gists/0733eca6b4cb88ff9d7de746803f4039
\ No newline at end of file
-TAP_DANCE_ENABLE = yes\r
-LAYER_UNDERGLOW_LIGHTING = yes\r
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend\r
-COMMAND_ENABLE = no # Commands for debug and configuration\r
-RGBLIGHT_ENABLE = yes\r
-MIDI_ENABLE = no\r
-\r
-ifndef QUANTUM_DIR\r
- include ../../../../Makefile\r
-endif\r
+TAP_DANCE_ENABLE = yes
+LAYER_UNDERGLOW_LIGHTING = yes
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+COMMAND_ENABLE = no # Commands for debug and configuration
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
-RGBLIGHT_ENABLE = yes\r
-RGBLIGHT_ANIMATION = no\r
-\r
-ifndef QUANTUM_DIR\r
- include ../../../../Makefile\r
-endif\r
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_ANIMATION = no
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
+STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER
+
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
\ No newline at end of file
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define NO_ACTION_LAYER
+#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "gherkin.h"
+#include "keymap_steno.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ KEYMAP(
+ STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR ,
+ STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR ,
+ STN_NUM, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, STN_NUM),
+};
+
+void matrix_init_user() {
+ steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
+}
\ No newline at end of file
--- /dev/null
+# Gherkin Steno
+
+This is a stenography-only keymap. It boots by default into GeminiPR mode. All the excess stuff is stripped away (I'd remove normal keyboard support if I could).
+
+> Note: The number bar has been moved to the bottom row in all the left-over spaces.
+x
+ | S | T | P | H | * | F | P | L | T | D |
+ | S | K | W | R | * | R | B | G | S | Z |
+ | # | # | A | O | # | E | U | # | # | # |
\ No newline at end of file
--- /dev/null
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "gherkin.h"
+#include "action_layer.h"
+#include "keymap_steno.h"
+
+#define ST_BOLT QK_STENO_BOLT
+#define ST_GEM QK_STENO_GEMINI
+
+#define XXXXXXX KC_NO
+
+enum keyboard_layers {
+ _QWERTY,
+ _RAISE,
+ _LOWER,
+ _PLOVER,
+ _ADJUST
+};
+
+#define ADJ_Z LT(_ADJUST, KC_Z)
+#define RS_BSPC LT(_RAISE, KC_BSPC)
+#define LW_SPC LT(_LOWER, KC_SPC)
+#define MO_ADJ MO(_ADJUST)
+#define TG_PLV TG(_PLOVER)
+#define OS_LCTL OSM(MOD_LCTL)
+#define OS_LALT OSM(MOD_LALT)
+#define OS_LGUI OSM(MOD_LGUI)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = KEYMAP(
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT,
+ ADJ_Z, KC_X, KC_C, KC_V, RS_BSPC, LW_SPC, KC_B, KC_N, KC_M, KC_ENT ),
+
+ [_RAISE] = KEYMAP(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_7, KC_9, KC_0,
+ KC_ESC , KC_MINS, KC_EQL , _______, KC_LBRC, KC_RBRC, _______, KC_QUOT, KC_SCLN, _______,
+ OS_LCTL, OS_LGUI, OS_LALT, KC_GRV , _______, KC_TAB , KC_BSLS, KC_COMM, KC_DOT , KC_SLSH),
+
+ [_LOWER] = KEYMAP(
+ KC_F1 , KC_F2 , KC_F3 , KC_F4 , XXXXXXX, KC_PGUP, KC_HOME, KC_UP , KC_END , XXXXXXX,
+ KC_F5 , KC_F6 , KC_F7 , KC_F8 , XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______,
+ KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_DEL , _______, OS_LALT, OS_LGUI, OS_LCTL, KC_CAPS),
+
+ [_PLOVER] = KEYMAP(
+ STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR ,
+ STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR ,
+ MO_ADJ, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, XXXXXXX),
+
+ [_ADJUST] = KEYMAP(
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ST_BOLT, ST_GEM , TG_PLV ,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET ),
+};
\ No newline at end of file
An alternative controler for the HHKB designed by hasu.
-Keyboard Maintainer: QMK Community
-Hardware Supported: HHKB Alternate Controller
-Hardware Availability: https://geekhack.org/index.php?topic=12047.0
+Keyboard Maintainer: QMK Community
+Hardware Supported: HHKB Alternate Controller
+Hardware Availability: https://geekhack.org/index.php?topic=12047.0
Make example for this keyboard (after setting up your build environment):
--- /dev/null
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "lets_split.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
+ KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | O | E | U | I | D | H | T | N | S | / |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
+ KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
+ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
+ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = KEYMAP( \
+ _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+ #endif
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+ #endif
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
\ No newline at end of file
--- /dev/null
+// Can't Remember Sh*t Keymap for Let's Split
+// Trying to fit as many characters as possible on the default layer
+// as its easier for me to remember logical functions than characters
+// Also, I like me some numpad
+
+
+#include "lets_split.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _GAME 1
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ GAME,
+ LOWER,
+ RAISE,
+ BACKLIT,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab | A | S | D | F | G | H | J | K | L | ; | ' |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI | \ | Alt | Lower|SpcRse| Space|Raise | [ | - | = | ] |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT), \
+ KC_LCTL, KC_LGUI, KC_BSLS, KC_LALT, LOWER, LT(4, KC_SPC), KC_SPC, RAISE, LT(3, KC_LBRC), KC_MINS, KC_EQL, CTL_T(KC_RBRC) \
+),
+
+/* Game
+ * ,-----------------------------------------------------------------------------------.
+ * | 1 | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |Shift | A | S | D | F | G | H | J | K | L | ; | ' |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Ctrl | Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Alt | 4 | 3 | 2 | Lower| Space |Raise | Left | Down | Up | Right|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_GAME] = KEYMAP( \
+ KC_1, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______ , \
+ KC_LALT, KC_4, KC_3, KC_2, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \
+),
+
+
+/* Lower (switched to # because KP# were weird in terminal emulators)
+ * ,-----------------------------------------------------------------------------------.
+ * | Del | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | . | * |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | NumLk| F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc | | | | | | 0 | | | | KP_+ | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+ KC_DEL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, KC_DOT, KC_ASTR, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, KC_SLSH, _______, \
+ KC_ESC, _______, _______, _______, _______, _______, KC_0, _______, _______, _______, KC_PLUS, _______ \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | Wh Up|RightC| M-Up | LeftC|QWERTY| Left | Down | Up | Right| | | ` |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | Wh Dn| M-L | M-Dn | M-R | ACL0 | ACL1 | ACL2 | | | \ | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | App | | | | | Ins | | Home | PGDN | PGUP | End |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+ KC_DEL, KC_WH_U, KC_BTN2, KC_MS_U, KC_BTN1, QWERTY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PIPE, KC_GRV, \
+ _______, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, KC_BSLASH, _______, \
+ _______, KC_APP, _______, _______, _______, _______, KC_INS, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | C-A-I|Qwerty| | |Reset |Macro0| | | | | |C-A-D |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff| Game |AGswap|AGnorm| | | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| | | | | | | BL_T |BL_DEC|BL_INC|BL_ST |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = KEYMAP( \
+ LALT(LCTL(KC_INS)), QWERTY, _______, _______, RESET, M(0), _______, _______, _______, _______, _______, LALT(LCTL(KC_DEL)), \
+ _______, _______, _______, AU_ON, AU_OFF, GAME, AG_SWAP, AG_NORM, _______, _______, _______, _______, \
+ _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, \
+ BACKLIT, _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC , BL_INC , BL_STEP \
+)
+
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is.
+{
+ switch(id) {
+ case 0: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), T(LEFT), U(LSFT), D(LCTL), T(X), U(LCTL), T(RIGHT), D(LCTL), T(V), U(LCTL), T(LEFT), END ); // this swaps the characters on either side of the cursor when the macro executes
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2] = SONG(STARTUP_SOUND);
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case GAME:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_GAME);
+ }
+ return false;
+ break;
+
+
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case BACKLIT:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+ _delay_ms(20); // gets rid of tick
+ PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+}
+
+void music_on_user(void)
+{
+ music_scale_user();
+}
+
+void music_scale_user(void)
+{
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
--- /dev/null
+
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = yes # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_DELAY 0
+#define MOUSEKEY_TIME_TO_MAX 100
+#define MOUSEKEY_MAX_SPEED 10
+#define MOUSEKEY_WHEEL_DELAY 0
+
+#endif
--- /dev/null
+// Can't Remember Sh*t Keymap for Planck
+// Trying to fit as many characters as possible on the default layer
+// as its easier for me to remember logical functions than characters
+// Also, I like me some numpad
+
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _GAME 1
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum planck_keycodes {
+ QWERTY = SAFE_RANGE,
+ GAME,
+ LOWER,
+ RAISE,
+ BACKLIT,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab | A | S | D | F | G | H | J | K | L | ; | ' |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI | \ | Alt | Lower| Space |Raise | [ | - | = | ] |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) },
+ {KC_LCTL, KC_LGUI, KC_BSLS, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, LT(3, KC_LBRC), KC_MINS, KC_EQL, CTL_T(KC_RBRC)}
+},
+
+/* Game
+ * ,-----------------------------------------------------------------------------------.
+ * | 1 | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |Shift | A | S | D | F | G | H | J | K | L | ; | ' |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Ctrl | Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Alt | 4 | 3 | 2 | Lower| Space |Raise | Left | Down | Up | Right|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_GAME] = {
+ { KC_1, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______ },
+ {KC_LALT, KC_4, KC_3, KC_2, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT}
+},
+
+
+/* Lower (switched to # because KP# were weird in terminal emulators)
+ * ,-----------------------------------------------------------------------------------.
+ * | Del | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | . | * |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | NumLk| F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc | | | | | 0 | | | | KP_+ | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+ { KC_DEL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______},
+ { _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, KC_DOT, KC_ASTR},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, KC_SLSH, _______},
+ {KC_ESC, _______, _______, _______, _______, KC_0, KC_0, _______, _______, _______, KC_PLUS, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | Wh Up|RightC| M-Up | LeftC|QWERTY| Left | Down | Up | Right| | | ` |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | Wh Dn| M-L | M-Dn | M-R | ACL0 | ACL1 | ACL2 | | | \ | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | App | | | | Ins | | Home | PGDN | PGUP | End |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+ { KC_DEL, KC_WH_U, KC_BTN2, KC_MS_U, KC_BTN1, QWERTY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PIPE, KC_GRV},
+ {_______, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, KC_BSLASH, _______},
+ {_______, KC_APP, _______, _______, _______, KC_INS, KC_INS, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | C-A-I|Qwerty| | |Reset |Macro0| | | | | |C-A-D |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff| Game |AGswap|AGnorm| | | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| | | | | | | BL_T |BL_DEC|BL_INC|BL_ST |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+ {LALT(LCTL(KC_INS)), QWERTY, _______, _______, RESET, M(0), _______, _______, _______, _______, _______, LALT(LCTL(KC_DEL))},
+ {_______, _______, _______, AU_ON, AU_OFF, GAME, AG_SWAP, AG_NORM, _______, _______, _______, _______},
+ {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
+ {BACKLIT, _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC , BL_INC , BL_STEP}
+}
+
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is.
+{
+ switch(id) {
+ case 0: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), T(LEFT), U(LSFT), D(LCTL), T(X), U(LCTL), T(RIGHT), D(LCTL), T(V), U(LCTL), T(LEFT), END ); // this swaps the characters on either side of the cursor when the macro executes
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2] = SONG(STARTUP_SOUND);
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case GAME:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_GAME);
+ }
+ return false;
+ break;
+
+
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case BACKLIT:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+ _delay_ms(20); // gets rid of tick
+ PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+}
+
+void music_on_user(void)
+{
+ music_scale_user();
+}
+
+void music_scale_user(void)
+{
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
--- /dev/null
+# Dales Planck Layout
+Goals:
+* Trying to fit as many characters as possible on the default layer
+ * its easier for me to remember logical functions than characters
+ * this also makes it easier to use the two US ISO keysets I had on hand
+* A number pad AND a number row
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER
AUDIO_ENABLE = no # Audio output on port C6
+MIDI_ENABLE = no # MIDI controls
--- /dev/null
+
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = yes # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "preonic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum preonic_layers {
+ _QWERTY,
+ _COLEMAK,
+ _DVORAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+enum preonic_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab | A | S | D | F | G | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI | \ | Alt |Lower | Space |Raise | [ | - | = | ] |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT(MOD_RSFT, KC_ENT) },
+ {KC_LCTL, KC_LGUI, KC_BSLS, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, LT(_LOWER, KC_LBRC), KC_MINS, KC_EQL, MT(MOD_RCTL, KC_RBRC)}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
+ {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab | " | , | . | P | Y | F | G | C | R | L | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | O | E | U | I | D | H | T | N | S | / |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL},
+ {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
+ {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
+ {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | . | * |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | / | Ent |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | 0 | | [ | - | + | ] |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, KC_DOT, KC_ASTR},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, _______, _______},
+ {_______, _______, _______, _______, _______, KC_0, KC_0, _______, _______, _______, KC_PLUS, _______}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | Wh Up|RightC| M-Up | LeftC|QWERTY| Left | Down | Up | Right| | | ` |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | Wh Dn| M-L | M-Dn | M-R | PrScr| Sc Lk| Break| | | \ | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | App | | | | Ins | | Home | PGDN | PGUP | End |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
+ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+ { KC_DEL, KC_WH_U, KC_BTN2, KC_MS_U, KC_BTN1, QWERTY, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PIPE, KC_GRV},
+ {_______, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, KC_BSLASH, _______},
+ {_______, KC_APP, _______, _______, _______, KC_INS, KC_INS, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
+},
+
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | C-A-I|Qwerty| | |Reset |Macro0| | | | | |C-A-D |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff| |AGswap|AGnorm| | | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| | | | | | | BL_T |BL_DEC|BL_INC|BL_ST |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+ {LALT(LCTL(KC_INS)), QWERTY, _______, _______, RESET, M(0), _______, _______, _______, _______, _______, LALT(LCTL(KC_DEL))},
+ {_______, _______, _______, AU_ON, AU_OFF, _______, AG_SWAP, AG_NORM, _______, _______, _______, _______},
+ {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
+ {BACKLIT, _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC , BL_INC , BL_STEP}
+}
+
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is.
+{
+ switch(id) {
+ case 0: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( D(LSFT), T(LEFT), U(LSFT), D(LCTL), T(X), U(LCTL), T(RIGHT), D(LCTL), T(V), U(LCTL), T(LEFT), END ); // this swaps the characters on either side of the cursor when the macro executes
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = {
+ {NOTE_B5, 20},
+ {NOTE_B6, 8},
+ {NOTE_DS6, 20},
+ {NOTE_B6, 8}
+};
+
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+ #endif
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+ #endif
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case BACKLIT:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ }
+ return true;
+};
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+ _delay_ms(20); // gets rid of tick
+ PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+}
+
+void music_on_user(void)
+{
+ music_scale_user();
+}
+
+void music_scale_user(void)
+{
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
--- /dev/null
+# Dale's Preonic layout - largely based on his Planck.
+# The hardware number row is mostly to avoid inherent context switching delay while he is receiving auditory input.
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no
ifndef QUANTUM_DIR
include ../../../Makefile
-endif
\ No newline at end of file
+endif
}
// translates key to keycode
+__attribute__ ((weak))
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
// Read entire word (16bits)
*/
#include "process_steno.h"
#include "quantum_keycodes.h"
+#include "eeprom.h"
#include "keymap_steno.h"
#include "virtser.h"
#define BOLT_STATE_SIZE 4
#define GEMINI_STATE_SIZE 6
+#define MAX_STATE_SIZE GEMINI_STATE_SIZE
-uint8_t state[MAX(BOLT_STATE_SIZE, GEMINI_STATE_SIZE)] = {0};
+uint8_t state[MAX_STATE_SIZE] = {0};
uint8_t pressed = 0;
steno_mode_t mode;
TXB_NUM, TXB_NUM, TXB_NUM, TXB_NUM, TXB_NUM, TXB_NUM, TXB_Z_R
};
-#define BOLTMAP_MASK (sizeof(boltmap) - 1)
-
-
void steno_clear_state(void) {
- memset(state, 0, sizeof(state));
+ __builtin_memset(state, 0, sizeof(state));
}
void steno_init() {
int8_t layer_switch_get_layer(keypos_t key)
{
+#ifndef NO_ACTION_LAYER
action_t action;
action.code = ACTION_TRANSPARENT;
-#ifndef NO_ACTION_LAYER
uint32_t layers = layer_state | default_layer_state;
/* check top layer first */
for (int8_t i = 31; i >= 0; i--) {
# define CDC_OUT_EPNUM MIDI_STREAM_OUT_EPNUM
#endif
-#if defined(__AVR_ATmega32U2__) && CDC_OUT_EPNUM > 4
+#if (defined(__AVR_ATmega32U2__) && CDC_OUT_EPNUM > 4) || \
+ (defined(__AVR_ATmega32U4__) && CDC_OUT_EPNUM > 6)
# error "Endpoints are not available enough to support all functions. Remove some in Makefile.(MOUSEKEY, EXTRAKEY, CONSOLE, NKRO, MIDI, SERIAL)"
#endif
arm-none-eabi-binutils \
arm-none-eabi-newlib \
diffutils
+elif [[ -n "$(type -P emerge)" ]]; then
+ echo 'Please check that your gcc is built with the multilib use flag enabled.'
+ emerge -vq sys-devel/crossdev
+ USE="-openmp -hardened -sanitize -vtv" crossdev -s4 --stable --g =4.9.4 --portage --verbose --target avr
fi
projects / qmk_firmware.git / commitdiff