--- /dev/null
+#include "9key.h"
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
\ No newline at end of file
--- /dev/null
+#ifndef NINEKEY_H
+#define NINEKEY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ k00, k01, k02, \
+ k10, k11, k12, \
+ k20, k21, k22 \
+) \
+{ \
+ { k00, k01, k02 }, \
+ { k10, k11, k12 }, \
+ { k20, k21, k22 } \
+}
+
+#endif
--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0007
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Bishop Keyboards
+#define PRODUCT 9Key
+#define DESCRIPTION Bishop Keyboards 9Key // Charleston, SC Meetup Handout
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* 9Key PCB default pin-out */
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { F4, F5, F6 }
+#define UNUSED_PINS
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F7
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 1 // Number of LEDs
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define TAPPING_TERM 150
+
+#endif
--- /dev/null
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#include "9key.h"
+
+// Tap Dance Declarations
+enum {
+ ENT_5 = 0
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* LAYER 0
+ * ,-----------------.
+ * | 1 | 2 | 3 |
+ * |-----+-----+-----|
+ * | 4 |5/ENT| 6 | Dbl Tap 5 for Enter
+ * |-----+-----+-----|
+ * | 7 | 8 | FN |
+ * `-----------------'
+ */
+[0] = KEYMAP( \
+ KC_1, KC_2, KC_3, \
+ KC_4, TD(ENT_5), KC_6, \
+ KC_7, KC_8, MO(1) \
+),
+
+/* LAYER 1
+ * ,-----------------.
+ * | 9 | 0 | - |
+ * |-----+-----+-----|
+ * | + | * | / |
+ * |-----+-----+-----|
+ * | F1 | F2 | |
+ * `-----------------'
+ */
+[1] = KEYMAP( \
+ KC_9, KC_0, KC_MINS, \
+ KC_PLUS, KC_ASTR, KC_SLSH, \
+ KC_F1, KC_F2, KC_TRNS \
+)
+
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [ENT_5] = ACTION_TAP_DANCE_DOUBLE(KC_5, KC_ENT)
+};
+
+void matrix_init_user(void) {
+}
\ No newline at end of file
--- /dev/null
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = yes # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = yes
+TAP_DANCE_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
projects / qmk_firmware.git / commitdiff