{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \
}
-#endif
+#endif
\ No newline at end of file
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes # Console for debug(+400)
+# COMMAND_ENABLE ?= yes # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT GH60
+#define DESCRIPTION t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ *
+ *
+ * #define ws2812_PORTREG PORTF
+ * #define ws2812_DDRREG DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14 // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG PORTF
+#define ws2812_DDRREG DDRF
+#define ws2812_pin PF4
+*/
+#define RGB_DI_PIN F4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 11 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
--- /dev/null
+#include "gh60.h"
+#include "action_layer.h"
+#include "rgblight.h"
+
+#define _DEFAULT 0
+#define _FN 1
+#define _WASD 2
+#define _SFX 3
+
+//bool esc_led_on;
+
+enum planck_keycodes {
+ DEFAULT = SAFE_RANGE
+};
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty gui/alt/space/alt/gui
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
+ * |-----------------------------------------------------------------------------------------+
+ * |LGUI | LAlt | Space | RAlt |RGUI |
+ * `-----------------------------------------------------------------'
+ */
+ [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
+ ______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \
+ ),
+
+/* FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | Stop | |
+ * `-----------------------------------------------------------------'
+ */
+ [_FN] = KEYMAP_HHKB( /* Layer 1 */
+ TG(_SFX),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
+ ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \
+ ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \
+ ______, ______, ______, TG(_WASD), KC_MSTP, ______, ______, ______ \
+ ),
+
+/* WASD Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | Up | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Left| Down|Right| | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | |
+ * `-----------------------------------------------------------------'
+ */
+ [_WASD] = KEYMAP_HHKB( /* Layer 2 */
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, KC_UP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, KC_LEFT, KC_DOWN,KC_RGHT,______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______, \
+ ______, ______, ______, ______, ______, ______, ______, ______ \
+ ),
+
+/* SFX Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | BL- | BL+ | BL | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | RGBT| RGBM| | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | |
+ * `-----------------------------------------------------------------'
+ */
+ [_SFX] = KEYMAP_HHKB(
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______ \
+ )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ return MACRO_NONE;
+};
+
+enum function_id {
+ RGBLED_TOGGLE,
+ RGBLED_STEP_MODE,
+ RGBLED_INCREASE_HUE,
+ RGBLED_DECREASE_HUE,
+ RGBLED_INCREASE_SAT,
+ RGBLED_DECREASE_SAT,
+ RGBLED_INCREASE_VAL,
+ RGBLED_DECREASE_VAL
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(RGBLED_TOGGLE),
+ [1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
+ [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+ [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+ [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+ [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+ [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+ [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL)
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ switch (id) {
+ case RGBLED_TOGGLE:
+ if (record->event.pressed) {
+ rgblight_toggle();
+ }
+ break;
+ case RGBLED_INCREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_increase_hue();
+ }
+ break;
+ case RGBLED_DECREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_decrease_hue();
+ }
+ break;
+ case RGBLED_INCREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_increase_sat();
+ }
+ break;
+ case RGBLED_DECREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_decrease_sat();
+ }
+ break;
+ case RGBLED_INCREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_increase_val();
+ }
+ break;
+ case RGBLED_DECREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_decrease_val();
+ }
+ break;
+ case RGBLED_STEP_MODE:
+ if (record->event.pressed) {
+ rgblight_step();
+ }
+ break;
+ }
+}
+
+void matrix_scan_user(void) {
+ uint32_t layer = layer_state;
+
+ if (layer & (1<<1)) {
+ gh60_fn_led_on();
+ } else {
+ gh60_fn_led_off();
+ }
+
+ if (layer & (1<<2)) {
+ gh60_wasd_leds_on();
+ } else {
+ gh60_wasd_leds_off();
+ }
+
+ if (layer & (1<<3)) {
+ gh60_esc_led_on();
+ } else {
+ gh60_esc_led_off();
+ }
+};
\ No newline at end of file
--- /dev/null
+#include "satan.h"
+#include "action_layer.h"
+#include "rgblight.h"
+
+#define _DEFAULT 0
+#define _FN 1
+#define _SFX 2
+
+enum planck_keycodes {
+ DEFAULT = SAFE_RANGE
+};
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty gui/alt/space/alt/gui
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
+ * |-----------------------------------------------------------------------------------------+
+ * |LGUI | LAlt | Space | RAlt |RGUI |
+ * `-----------------------------------------------------------------'
+ */
+ [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
+ ______, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, ______, ______ \
+ ),
+
+/* FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | CAPS | BL- | BL+ | BL | | | | | Psc | Slck| Paus| Up | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | Stop | |
+ * `-----------------------------------------------------------------'
+ */
+ [_FN] = KEYMAP_HHKB( /* Layer 1 */
+ TG(_SFX), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
+ ______, KC_VOLD,KC_VOLU,KC_MUTE,______, ______, KC_PAST,KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, \
+ ______, KC_MPRV,KC_MPLY,KC_MNXT,______, ______, KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______, ______, \
+ ______, ______, ______, ______, KC_MSTP, ______, ______, ______ \
+ ),
+
+/* SFX Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | BL- | BL+ | BL | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | RGBT| RGBM| | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | |
+ * `-----------------------------------------------------------------'
+ */
+ [_SFX] = KEYMAP_HHKB(
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, BL_DEC, BL_INC, BL_TOGG,______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______ \
+ )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ return MACRO_NONE;
+};
+
+enum function_id {
+ RGBLED_TOGGLE,
+ RGBLED_STEP_MODE,
+ RGBLED_INCREASE_HUE,
+ RGBLED_DECREASE_HUE,
+ RGBLED_INCREASE_SAT,
+ RGBLED_DECREASE_SAT,
+ RGBLED_INCREASE_VAL,
+ RGBLED_DECREASE_VAL
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(RGBLED_TOGGLE),
+ [1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
+ [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+ [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+ [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+ [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+ [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+ [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL)
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ switch (id) {
+ case RGBLED_TOGGLE:
+ if (record->event.pressed) {
+ rgblight_toggle();
+ }
+ break;
+ case RGBLED_INCREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_increase_hue();
+ }
+ break;
+ case RGBLED_DECREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_decrease_hue();
+ }
+ break;
+ case RGBLED_INCREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_increase_sat();
+ }
+ break;
+ case RGBLED_DECREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_decrease_sat();
+ }
+ break;
+ case RGBLED_INCREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_increase_val();
+ }
+ break;
+ case RGBLED_DECREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_decrease_val();
+ }
+ break;
+ case RGBLED_STEP_MODE:
+ if (record->event.pressed) {
+ rgblight_step();
+ }
+ break;
+ }
+}
\ No newline at end of file
--- /dev/null
+# Dbroqua HHKB like Layout
+
+Like the HHKB but with a Satan GH60 PCB :D.
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua_hhkb make dfu
+```
\ No newline at end of file
+++ /dev/null
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-#include "satan.h"
-
-#define _DEFAULT 0
-#define _ALTDISP 1
-#define _FN 2
-
-enum planck_keycodes {
- DEFAULT = SAFE_RANGE,
- ALTDISP
-};
-
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty alt/gui/space/gui/alt
- * ,-----------------------------------------------------------------------------------------.
- * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
- * |-----------------------------------------------------------------------------------------+
- * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
- * |-----------------------------------------------------------------------------------------+
- * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
- * |-----------------------------------------------------------------------------------------+
- * | LAlt| LGUI | Space | RGUI | RAlt |
- * `-----------------------------------------------------------------'
- */
- [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
- ______, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, ______, ______ \
- ),
-
-/* Qwerty gui/alt/space/alt/gui
- * ,-----------------------------------------------------------------------------------------.
- * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
- * |-----------------------------------------------------------------------------------------+
- * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
- * |-----------------------------------------------------------------------------------------+
- * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
- * |-----------------------------------------------------------------------------------------+
- * |LGUI | LAlt | Space | RAlt |RGUI |
- * `-----------------------------------------------------------------'
- */
- [_ALTDISP] = KEYMAP_HHKB( /* Basic QWERTY */
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
- ______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \
- ),
-
-/* FN Layer
- * ,-----------------------------------------------------------------------------------------.
- * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
- * |-----------------------------------------------------------------------------------------+
- * | CAPS | BL- | BL+ | BL | | | | | Psc | Slck| Paus| Up | | |
- * |-----------------------------------------------------------------------------------------+
- * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
- * |-----------------------------------------------------------------------------------------+
- * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
- * |-----------------------------------------------------------------------------------------+
- * | | | | Stop | |
- * `-----------------------------------------------------------------'
- */
- [_FN] = KEYMAP_HHKB( /* Layer 1 */
- ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- KC_CAPS, BL_DEC, BL_INC, BL_TOGG, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
- ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, \
- ______, KC_MPRV, KC_MPLY, KC_MNXT,______,______,KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______,______, \
- ______, DEFAULT, ALTDISP, ______, KC_MSTP, ______, ______, ______ \
- )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- return MACRO_NONE;
-};
-
-void persistant_default_layer_set(uint16_t default_layer) {
- eeconfig_update_default_layer(default_layer);
- default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case DEFAULT:
- if (record->event.pressed) {
- persistant_default_layer_set(1UL<<_DEFAULT);
- }
- return false;
- break;
- case ALTDISP:
- if (record->event.pressed) {
- persistant_default_layer_set(1UL<<_ALTDISP);
- }
- return false;
- break;
- }
- return true;
-}
\ No newline at end of file
+++ /dev/null
-# Dbroqua HHKB like Layout
-
-Like the HHKB but with a Satan GH60 PCB :D.
-
-# Programming Instructions:
-Enter into programming mode and run the following command.
-```
-$ sudo KEYMAP=dbroqua_hhkb make dfu
-```
\ No newline at end of file
projects / qmk_firmware.git / commitdiff