# hex files
*.hex binary
+*.eep binary
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#include "hal.h"\r
-\r
-/**\r
- * @brief PAL setup.\r
- * @details Digital I/O ports static configuration as defined in @p board.h.\r
- * This variable is used by the HAL when initializing the PAL driver.\r
- */\r
-#if HAL_USE_PAL || defined(__DOXYGEN__)\r
-const PALConfig pal_default_config =\r
-{\r
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},\r
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},\r
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},\r
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},\r
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},\r
-};\r
-#endif\r
-\r
-/*\r
- * Early initialization code.\r
- * This initialization must be performed just after stack setup and before\r
- * any other initialization.\r
- */\r
-void __early_init(void) {\r
-\r
- stm32_clock_init();\r
-}\r
-\r
-/*\r
- * Board-specific initialization code.\r
- */\r
-void boardInit(void) {\r
-}\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+ {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+ {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+ {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+ {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+ {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+ stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _BOARD_H_\r
-#define _BOARD_H_\r
-\r
-/*\r
- * Setup for a Generic STM32F103 board.\r
- */\r
-\r
-/*\r
- * Board identifier.\r
- */\r
-#define BOARD_GENERIC_STM32_F103\r
-#define BOARD_NAME "Generic STM32F103x board"\r
-\r
-/*\r
- * Board frequencies.\r
- */\r
-#define STM32_LSECLK 32768\r
-#define STM32_HSECLK 8000000\r
-\r
-/*\r
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.\r
- */\r
-#define STM32F103xB\r
-\r
-/*\r
- * IO pins assignments\r
- */\r
-\r
-/* on-board */\r
-\r
-#define GPIOC_LED 13\r
-#define GPIOD_OSC_IN 0\r
-#define GPIOD_OSC_OUT 1\r
-\r
-/* In case your board has a "USB enable" hardware\r
- controlled by a pin, define it here. (It could be just\r
- a 1.5k resistor connected to D+ line.)\r
-*/\r
-/*\r
-#define GPIOB_USB_DISC 10\r
-*/\r
-\r
-/*\r
- * I/O ports initial setup, this configuration is established soon after reset\r
- * in the initialization code.\r
- *\r
- * The digits have the following meaning:\r
- * 0 - Analog input.\r
- * 1 - Push Pull output 10MHz.\r
- * 2 - Push Pull output 2MHz.\r
- * 3 - Push Pull output 50MHz.\r
- * 4 - Digital input.\r
- * 5 - Open Drain output 10MHz.\r
- * 6 - Open Drain output 2MHz.\r
- * 7 - Open Drain output 50MHz.\r
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.\r
- * 9 - Alternate Push Pull output 10MHz.\r
- * A - Alternate Push Pull output 2MHz.\r
- * B - Alternate Push Pull output 50MHz.\r
- * C - Reserved.\r
- * D - Alternate Open Drain output 10MHz.\r
- * E - Alternate Open Drain output 2MHz.\r
- * F - Alternate Open Drain output 50MHz.\r
- * Please refer to the STM32 Reference Manual for details.\r
- */\r
-\r
-/*\r
- * Port A setup.\r
- * Everything input with pull-up except:\r
- * PA2 - Alternate output (USART2 TX).\r
- * PA3 - Normal input (USART2 RX).\r
- * PA9 - Alternate output (USART1 TX).\r
- * PA10 - Normal input (USART1 RX).\r
- */\r
-#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */\r
-#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */\r
-#define VAL_GPIOAODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port B setup.\r
- * Everything input with pull-up except:\r
- * PB10 - Push Pull output (USB switch).\r
- */\r
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */\r
-#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */\r
-#define VAL_GPIOBODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port C setup.\r
- * Everything input with pull-up except:\r
- * PC13 - Push Pull output (LED).\r
- */\r
-#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */\r
-#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */\r
-#define VAL_GPIOCODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port D setup.\r
- * Everything input with pull-up except:\r
- * PD0 - Normal input (XTAL).\r
- * PD1 - Normal input (XTAL).\r
- */\r
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */\r
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */\r
-#define VAL_GPIODODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port E setup.\r
- * Everything input with pull-up except:\r
- */\r
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */\r
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */\r
-#define VAL_GPIOEODR 0xFFFFFFFF\r
-\r
-/*\r
- * USB bus activation macro, required by the USB driver.\r
- */\r
-/* The point is that most of the generic STM32F103* boards\r
- have a 1.5k resistor connected on one end to the D+ line\r
- and on the other end to some pin. Or even a slightly more\r
- complicated "USB enable" circuit, controlled by a pin.\r
- That should go here.\r
-\r
- However on some boards (e.g. one that I have), there's no\r
- such hardware. In which case it's better to not do anything.\r
-*/\r
-/*\r
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)\r
-*/\r
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);\r
-\r
-/*\r
- * USB bus de-activation macro, required by the USB driver.\r
- */\r
-/*\r
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)\r
-*/\r
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);\r
-\r
-#if !defined(_FROM_ASM_)\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
- void boardInit(void);\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-#endif /* _FROM_ASM_ */\r
-\r
-#endif /* _BOARD_H_ */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOC_LED 13
+#define GPIOD_OSC_IN 0
+#define GPIOD_OSC_OUT 1
+
+/* In case your board has a "USB enable" hardware
+ controlled by a pin, define it here. (It could be just
+ a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC 10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2 - Alternate output (USART2 TX).
+ * PA3 - Normal input (USART2 RX).
+ * PA9 - Alternate output (USART1 TX).
+ * PA10 - Normal input (USART1 RX).
+ */
+#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
+#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
+#define VAL_GPIOAODR 0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10 - Push Pull output (USB switch).
+ */
+#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
+#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
+#define VAL_GPIOBODR 0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13 - Push Pull output (LED).
+ */
+#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
+#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
+#define VAL_GPIOCODR 0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0 - Normal input (XTAL).
+ * PD1 - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
+#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
+#define VAL_GPIODODR 0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
+#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
+#define VAL_GPIOEODR 0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+ have a 1.5k resistor connected on one end to the D+ line
+ and on the other end to some pin. Or even a slightly more
+ complicated "USB enable" circuit, controlled by a pin.
+ That should go here.
+
+ However on some boards (e.g. one that I have), there's no
+ such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
-# List of all the board related files.\r
-BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c\r
-\r
-# Required include directories\r
-BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103\r
+# List of all the board related files.
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
-/*\r
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com\r
- * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>\r
- *\r
- * Permission is hereby granted, free of charge, to any person obtaining\r
- * a copy of this software and associated documentation files (the "Software"),\r
- * to deal in the Software without restriction, including without limitation\r
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,\r
- * and/or sell copies of the Software, and to permit persons to whom the\r
- * Software is furnished to do so, subject to the following conditions:\r
- *\r
- * The above copyright notice and this permission notice shall be included in\r
- * all copies or substantial portions of the Software.\r
- *\r
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS\r
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\r
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\r
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\r
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\r
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\r
- * SOFTWARE.\r
- */\r
-\r
-/*\r
- * KL26Z64 memory setup.\r
- */\r
-MEMORY\r
-{\r
- flash0 : org = 0x00000000, len = 0x100\r
- flash1 : org = 0x00000400, len = 0x10\r
- flash2 : org = 0x00000410, len = 62k - 0x410\r
- flash3 : org = 0x0000F800, len = 2k\r
- flash4 : org = 0x00000000, len = 0\r
- flash5 : org = 0x00000000, len = 0\r
- flash6 : org = 0x00000000, len = 0\r
- flash7 : org = 0x00000000, len = 0\r
- ram0 : org = 0x1FFFF800, len = 8k\r
- ram1 : org = 0x00000000, len = 0\r
- ram2 : org = 0x00000000, len = 0\r
- ram3 : org = 0x00000000, len = 0\r
- ram4 : org = 0x00000000, len = 0\r
- ram5 : org = 0x00000000, len = 0\r
- ram6 : org = 0x00000000, len = 0\r
- ram7 : org = 0x00000000, len = 0\r
-}\r
-\r
-/* Flash region for the configuration bytes.*/\r
-SECTIONS\r
-{\r
- .cfmprotect : ALIGN(4) SUBALIGN(4)\r
- {\r
- KEEP(*(.cfmconfig))\r
- } > flash1\r
-}\r
-\r
-/* For each data/text section two region are defined, a virtual region\r
- and a load region (_LMA suffix).*/\r
-\r
-/* Flash region to be used for exception vectors.*/\r
-REGION_ALIAS("VECTORS_FLASH", flash0);\r
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for constructors and destructors.*/\r
-REGION_ALIAS("XTORS_FLASH", flash2);\r
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for code text.*/\r
-REGION_ALIAS("TEXT_FLASH", flash2);\r
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for read only data.*/\r
-REGION_ALIAS("RODATA_FLASH", flash2);\r
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for various.*/\r
-REGION_ALIAS("VARIOUS_FLASH", flash2);\r
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for RAM(n) initialization data.*/\r
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);\r
-\r
-/* RAM region to be used for Main stack. This stack accommodates the processing\r
- of all exceptions and interrupts.*/\r
-REGION_ALIAS("MAIN_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for the process stack. This is the stack used by\r
- the main() function.*/\r
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for data segment.*/\r
-REGION_ALIAS("DATA_RAM", ram0);\r
-REGION_ALIAS("DATA_RAM_LMA", flash2);\r
-\r
-/* RAM region to be used for BSS segment.*/\r
-REGION_ALIAS("BSS_RAM", ram0);\r
-\r
-/* RAM region to be used for the default heap.*/\r
-REGION_ALIAS("HEAP_RAM", ram0);\r
-\r
-__eeprom_workarea_start__ = ORIGIN(flash3);\r
-__eeprom_workarea_size__ = LENGTH(flash3);\r
-__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;\r
-\r
-/* Generic rules inclusion.*/\r
-INCLUDE rules.ld\r
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+ flash0 : org = 0x00000000, len = 0x100
+ flash1 : org = 0x00000400, len = 0x10
+ flash2 : org = 0x00000410, len = 62k - 0x410
+ flash3 : org = 0x0000F800, len = 2k
+ flash4 : org = 0x00000000, len = 0
+ flash5 : org = 0x00000000, len = 0
+ flash6 : org = 0x00000000, len = 0
+ flash7 : org = 0x00000000, len = 0
+ ram0 : org = 0x1FFFF800, len = 8k
+ ram1 : org = 0x00000000, len = 0
+ ram2 : org = 0x00000000, len = 0
+ ram3 : org = 0x00000000, len = 0
+ ram4 : org = 0x00000000, len = 0
+ ram5 : org = 0x00000000, len = 0
+ ram6 : org = 0x00000000, len = 0
+ ram7 : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+ .cfmprotect : ALIGN(4) SUBALIGN(4)
+ {
+ KEEP(*(.cfmconfig))
+ } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+ and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+ of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+ the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__ = LENGTH(flash3);
+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
-/*\r
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/*\r
- * ST32F103xB memory setup for use with the maplemini bootloader.\r
- * You will have to\r
- * #define CORTEX_VTOR_INIT 0x5000\r
- * in your projects chconf.h\r
- */\r
-MEMORY\r
-{\r
- flash0 : org = 0x08002000, len = 128k - 0x2000\r
- flash1 : org = 0x00000000, len = 0\r
- flash2 : org = 0x00000000, len = 0\r
- flash3 : org = 0x00000000, len = 0\r
- flash4 : org = 0x00000000, len = 0\r
- flash5 : org = 0x00000000, len = 0\r
- flash6 : org = 0x00000000, len = 0\r
- flash7 : org = 0x00000000, len = 0\r
- ram0 : org = 0x20000000, len = 20k\r
- ram1 : org = 0x00000000, len = 0\r
- ram2 : org = 0x00000000, len = 0\r
- ram3 : org = 0x00000000, len = 0\r
- ram4 : org = 0x00000000, len = 0\r
- ram5 : org = 0x00000000, len = 0\r
- ram6 : org = 0x00000000, len = 0\r
- ram7 : org = 0x00000000, len = 0\r
-}\r
-\r
-/* For each data/text section two region are defined, a virtual region\r
- and a load region (_LMA suffix).*/\r
-\r
-/* Flash region to be used for exception vectors.*/\r
-REGION_ALIAS("VECTORS_FLASH", flash0);\r
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for constructors and destructors.*/\r
-REGION_ALIAS("XTORS_FLASH", flash0);\r
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for code text.*/\r
-REGION_ALIAS("TEXT_FLASH", flash0);\r
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for read only data.*/\r
-REGION_ALIAS("RODATA_FLASH", flash0);\r
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for various.*/\r
-REGION_ALIAS("VARIOUS_FLASH", flash0);\r
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for RAM(n) initialization data.*/\r
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);\r
-\r
-/* RAM region to be used for Main stack. This stack accommodates the processing\r
- of all exceptions and interrupts.*/\r
-REGION_ALIAS("MAIN_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for the process stack. This is the stack used by\r
- the main() function.*/\r
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for data segment.*/\r
-REGION_ALIAS("DATA_RAM", ram0);\r
-REGION_ALIAS("DATA_RAM_LMA", flash0);\r
-\r
-/* RAM region to be used for BSS segment.*/\r
-REGION_ALIAS("BSS_RAM", ram0);\r
-\r
-/* RAM region to be used for the default heap.*/\r
-REGION_ALIAS("HEAP_RAM", ram0);\r
-\r
-/* Generic rules inclusion.*/\r
-INCLUDE rules.ld\r
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * #define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+ flash0 : org = 0x08002000, len = 128k - 0x2000
+ flash1 : org = 0x00000000, len = 0
+ flash2 : org = 0x00000000, len = 0
+ flash3 : org = 0x00000000, len = 0
+ flash4 : org = 0x00000000, len = 0
+ flash5 : org = 0x00000000, len = 0
+ flash6 : org = 0x00000000, len = 0
+ flash7 : org = 0x00000000, len = 0
+ ram0 : org = 0x20000000, len = 20k
+ ram1 : org = 0x00000000, len = 0
+ ram2 : org = 0x00000000, len = 0
+ ram3 : org = 0x00000000, len = 0
+ ram4 : org = 0x00000000, len = 0
+ ram5 : org = 0x00000000, len = 0
+ ram6 : org = 0x00000000, len = 0
+ ram7 : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+ and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+ of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+ the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-/*\r
- * STM32F0xx drivers configuration.\r
- * The following settings override the default settings present in\r
- * the various device driver implementation headers.\r
- * Note that the settings for each driver only have effect if the whole\r
- * driver is enabled in halconf.h.\r
- *\r
- * IRQ priorities:\r
- * 3...0 Lowest...Highest.\r
- *\r
- * DMA priorities:\r
- * 0...3 Lowest...Highest.\r
- */\r
-\r
-#define STM32F0xx_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#define STM32_NO_INIT FALSE\r
-#define STM32_PVD_ENABLE FALSE\r
-#define STM32_PLS STM32_PLS_LEV0\r
-#define STM32_HSI_ENABLED TRUE\r
-#define STM32_HSI14_ENABLED TRUE\r
-#define STM32_HSI48_ENABLED FALSE\r
-#define STM32_LSI_ENABLED TRUE\r
-#define STM32_HSE_ENABLED FALSE\r
-#define STM32_LSE_ENABLED FALSE\r
-#define STM32_SW STM32_SW_PLL\r
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2\r
-#define STM32_PREDIV_VALUE 1\r
-#define STM32_PLLMUL_VALUE 12\r
-#define STM32_HPRE STM32_HPRE_DIV1\r
-#define STM32_PPRE STM32_PPRE_DIV1\r
-#define STM32_ADCSW STM32_ADCSW_HSI14\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_ADCSW STM32_ADCSW_HSI14\r
-#define STM32_USBSW STM32_USBSW_HSI48\r
-#define STM32_CECSW STM32_CECSW_HSI\r
-#define STM32_I2C1SW STM32_I2C1SW_HSI\r
-#define STM32_USART1SW STM32_USART1SW_PCLK\r
-#define STM32_RTCSEL STM32_RTCSEL_LSI\r
-\r
-/*\r
- * ADC driver system settings.\r
- */\r
-#define STM32_ADC_USE_ADC1 FALSE\r
-#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
-#define STM32_ADC_IRQ_PRIORITY 2\r
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2\r
-\r
-/*\r
- * EXT driver system settings.\r
- */\r
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3\r
-\r
-/*\r
- * GPT driver system settings.\r
- */\r
-#define STM32_GPT_USE_TIM1 FALSE\r
-#define STM32_GPT_USE_TIM2 FALSE\r
-#define STM32_GPT_USE_TIM3 FALSE\r
-#define STM32_GPT_USE_TIM14 FALSE\r
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2\r
-\r
-/*\r
- * I2C driver system settings.\r
- */\r
-#define STM32_I2C_USE_I2C1 FALSE\r
-#define STM32_I2C_USE_I2C2 FALSE\r
-#define STM32_I2C_BUSY_TIMEOUT 50\r
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3\r
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3\r
-#define STM32_I2C_USE_DMA TRUE\r
-#define STM32_I2C_I2C1_DMA_PRIORITY 1\r
-#define STM32_I2C_I2C2_DMA_PRIORITY 1\r
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ICU driver system settings.\r
- */\r
-#define STM32_ICU_USE_TIM1 FALSE\r
-#define STM32_ICU_USE_TIM2 FALSE\r
-#define STM32_ICU_USE_TIM3 FALSE\r
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3\r
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3\r
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3\r
-\r
-/*\r
- * PWM driver system settings.\r
- */\r
-#define STM32_PWM_USE_ADVANCED FALSE\r
-#define STM32_PWM_USE_TIM1 FALSE\r
-#define STM32_PWM_USE_TIM2 FALSE\r
-#define STM32_PWM_USE_TIM3 FALSE\r
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3\r
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3\r
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define STM32_SERIAL_USE_USART1 FALSE\r
-#define STM32_SERIAL_USE_USART2 FALSE\r
-#define STM32_SERIAL_USART1_PRIORITY 3\r
-#define STM32_SERIAL_USART2_PRIORITY 3\r
-\r
-/*\r
- * SPI driver system settings.\r
- */\r
-#define STM32_SPI_USE_SPI1 FALSE\r
-#define STM32_SPI_USE_SPI2 FALSE\r
-#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2\r
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2\r
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ST driver system settings.\r
- */\r
-#define STM32_ST_IRQ_PRIORITY 2\r
-#define STM32_ST_USE_TIMER 2\r
-\r
-/*\r
- * UART driver system settings.\r
- */\r
-#define STM32_UART_USE_USART1 FALSE\r
-#define STM32_UART_USE_USART2 FALSE\r
-#define STM32_UART_USART1_IRQ_PRIORITY 3\r
-#define STM32_UART_USART2_IRQ_PRIORITY 3\r
-#define STM32_UART_USART1_DMA_PRIORITY 0\r
-#define STM32_UART_USART2_DMA_PRIORITY 0\r
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * USB driver system settings.\r
- */\r
-#define STM32_USB_USE_USB1 TRUE\r
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 3\r
-\r
-#endif /* _MCUCONF_H_ */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-#define STM32F103_MCUCONF\r
-\r
-/*\r
- * STM32F103 drivers configuration.\r
- * The following settings override the default settings present in\r
- * the various device driver implementation headers.\r
- * Note that the settings for each driver only have effect if the whole\r
- * driver is enabled in halconf.h.\r
- *\r
- * IRQ priorities:\r
- * 15...0 Lowest...Highest.\r
- *\r
- * DMA priorities:\r
- * 0...3 Lowest...Highest.\r
- */\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#define STM32_NO_INIT FALSE\r
-#define STM32_HSI_ENABLED TRUE\r
-#define STM32_LSI_ENABLED FALSE\r
-#define STM32_HSE_ENABLED TRUE\r
-#define STM32_LSE_ENABLED FALSE\r
-#define STM32_SW STM32_SW_PLL\r
-#define STM32_PLLSRC STM32_PLLSRC_HSE\r
-#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1\r
-#define STM32_PLLMUL_VALUE 9\r
-#define STM32_HPRE STM32_HPRE_DIV1\r
-#define STM32_PPRE1 STM32_PPRE1_DIV2\r
-#define STM32_PPRE2 STM32_PPRE2_DIV2\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_USB_CLOCK_REQUIRED TRUE\r
-#define STM32_USBPRE STM32_USBPRE_DIV1P5\r
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
-#define STM32_RTCSEL STM32_RTCSEL_HSEDIV\r
-#define STM32_PVD_ENABLE FALSE\r
-#define STM32_PLS STM32_PLS_LEV0\r
-\r
-/*\r
- * ADC driver system settings.\r
- */\r
-#define STM32_ADC_USE_ADC1 FALSE\r
-#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
-#define STM32_ADC_ADC1_IRQ_PRIORITY 6\r
-\r
-/*\r
- * CAN driver system settings.\r
- */\r
-#define STM32_CAN_USE_CAN1 FALSE\r
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11\r
-\r
-/*\r
- * EXT driver system settings.\r
- */\r
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6\r
-\r
-/*\r
- * GPT driver system settings.\r
- */\r
-#define STM32_GPT_USE_TIM1 FALSE\r
-#define STM32_GPT_USE_TIM2 FALSE\r
-#define STM32_GPT_USE_TIM3 FALSE\r
-#define STM32_GPT_USE_TIM4 FALSE\r
-#define STM32_GPT_USE_TIM5 FALSE\r
-#define STM32_GPT_USE_TIM8 FALSE\r
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7\r
-\r
-/*\r
- * I2C driver system settings.\r
- */\r
-#define STM32_I2C_USE_I2C1 FALSE\r
-#define STM32_I2C_USE_I2C2 FALSE\r
-#define STM32_I2C_BUSY_TIMEOUT 50\r
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5\r
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5\r
-#define STM32_I2C_I2C1_DMA_PRIORITY 3\r
-#define STM32_I2C_I2C2_DMA_PRIORITY 3\r
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ICU driver system settings.\r
- */\r
-#define STM32_ICU_USE_TIM1 FALSE\r
-#define STM32_ICU_USE_TIM2 FALSE\r
-#define STM32_ICU_USE_TIM3 FALSE\r
-#define STM32_ICU_USE_TIM4 FALSE\r
-#define STM32_ICU_USE_TIM5 FALSE\r
-#define STM32_ICU_USE_TIM8 FALSE\r
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7\r
-\r
-/*\r
- * PWM driver system settings.\r
- */\r
-#define STM32_PWM_USE_ADVANCED FALSE\r
-#define STM32_PWM_USE_TIM1 FALSE\r
-#define STM32_PWM_USE_TIM2 FALSE\r
-#define STM32_PWM_USE_TIM3 FALSE\r
-#define STM32_PWM_USE_TIM4 FALSE\r
-#define STM32_PWM_USE_TIM5 FALSE\r
-#define STM32_PWM_USE_TIM8 FALSE\r
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7\r
-\r
-/*\r
- * RTC driver system settings.\r
- */\r
-#define STM32_RTC_IRQ_PRIORITY 15\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define STM32_SERIAL_USE_USART1 FALSE\r
-#define STM32_SERIAL_USE_USART2 FALSE\r
-#define STM32_SERIAL_USE_USART3 FALSE\r
-#define STM32_SERIAL_USE_UART4 FALSE\r
-#define STM32_SERIAL_USE_UART5 FALSE\r
-#define STM32_SERIAL_USART1_PRIORITY 12\r
-#define STM32_SERIAL_USART2_PRIORITY 12\r
-#define STM32_SERIAL_USART3_PRIORITY 12\r
-#define STM32_SERIAL_UART4_PRIORITY 12\r
-#define STM32_SERIAL_UART5_PRIORITY 12\r
-\r
-/*\r
- * SPI driver system settings.\r
- */\r
-#define STM32_SPI_USE_SPI1 FALSE\r
-#define STM32_SPI_USE_SPI2 FALSE\r
-#define STM32_SPI_USE_SPI3 FALSE\r
-#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI3_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10\r
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10\r
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10\r
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ST driver system settings.\r
- */\r
-#define STM32_ST_IRQ_PRIORITY 8\r
-#define STM32_ST_USE_TIMER 2\r
-\r
-/*\r
- * UART driver system settings.\r
- */\r
-#define STM32_UART_USE_USART1 FALSE\r
-#define STM32_UART_USE_USART2 FALSE\r
-#define STM32_UART_USE_USART3 FALSE\r
-#define STM32_UART_USART1_IRQ_PRIORITY 12\r
-#define STM32_UART_USART2_IRQ_PRIORITY 12\r
-#define STM32_UART_USART3_IRQ_PRIORITY 12\r
-#define STM32_UART_USART1_DMA_PRIORITY 0\r
-#define STM32_UART_USART2_DMA_PRIORITY 0\r
-#define STM32_UART_USART3_DMA_PRIORITY 0\r
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * USB driver system settings.\r
- */\r
-#define STM32_USB_USE_USB1 TRUE\r
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13\r
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14\r
-\r
-#endif /* _MCUCONF_H_ */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED FALSE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC1_IRQ_PRIORITY 6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY 15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+#endif /* _MCUCONF_H_ */
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/**\r
- * @file templates/chconf.h\r
- * @brief Configuration file template.\r
- * @details A copy of this file must be placed in each project directory, it\r
- * contains the application specific kernel settings.\r
- *\r
- * @addtogroup config\r
- * @details Kernel related settings and hooks.\r
- * @{\r
- */\r
-\r
-#ifndef CHCONF_H\r
-#define CHCONF_H\r
-\r
-#define _CHIBIOS_RT_CONF_\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name System timers settings\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief System time counter resolution.\r
- * @note Allowed values are 16 or 32 bits.\r
- */\r
-#define CH_CFG_ST_RESOLUTION 32\r
-\r
-/**\r
- * @brief System tick frequency.\r
- * @details Frequency of the system timer that drives the system ticks. This\r
- * setting also defines the system tick time unit.\r
- */\r
-#define CH_CFG_ST_FREQUENCY 1000\r
-\r
-/**\r
- * @brief Time delta constant for the tick-less mode.\r
- * @note If this value is zero then the system uses the classic\r
- * periodic tick. This value represents the minimum number\r
- * of ticks that is safe to specify in a timeout directive.\r
- * The value one is not valid, timeouts are rounded up to\r
- * this value.\r
- */\r
-#define CH_CFG_ST_TIMEDELTA 0\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Kernel parameters and options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Round robin interval.\r
- * @details This constant is the number of system ticks allowed for the\r
- * threads before preemption occurs. Setting this value to zero\r
- * disables the preemption for threads with equal priority and the\r
- * round robin becomes cooperative. Note that higher priority\r
- * threads can still preempt, the kernel is always preemptive.\r
- * @note Disabling the round robin preemption makes the kernel more compact\r
- * and generally faster.\r
- * @note The round robin preemption is not supported in tickless mode and\r
- * must be set to zero in that case.\r
- */\r
-#define CH_CFG_TIME_QUANTUM 20\r
-\r
-/**\r
- * @brief Managed RAM size.\r
- * @details Size of the RAM area to be managed by the OS. If set to zero\r
- * then the whole available RAM is used. The core memory is made\r
- * available to the heap allocator and/or can be used directly through\r
- * the simplified core memory allocator.\r
- *\r
- * @note In order to let the OS manage the whole RAM the linker script must\r
- * provide the @p __heap_base__ and @p __heap_end__ symbols.\r
- * @note Requires @p CH_CFG_USE_MEMCORE.\r
- */\r
-#define CH_CFG_MEMCORE_SIZE 0\r
-\r
-/**\r
- * @brief Idle thread automatic spawn suppression.\r
- * @details When this option is activated the function @p chSysInit()\r
- * does not spawn the idle thread. The application @p main()\r
- * function becomes the idle thread and must implement an\r
- * infinite loop.\r
- */\r
-#define CH_CFG_NO_IDLE_THREAD FALSE\r
-\r
-/* Use __WFI in the idle thread for waiting. Does lower the power\r
- * consumption. */\r
-#define CORTEX_ENABLE_WFI_IDLE TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Performance options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief OS optimization.\r
- * @details If enabled then time efficient rather than space efficient code\r
- * is used when two possible implementations exist.\r
- *\r
- * @note This is not related to the compiler optimization options.\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_OPTIMIZE_SPEED TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Subsystem options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Time Measurement APIs.\r
- * @details If enabled then the time measurement APIs are included in\r
- * the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_TM FALSE\r
-\r
-/**\r
- * @brief Threads registry APIs.\r
- * @details If enabled then the registry APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_REGISTRY TRUE\r
-\r
-/**\r
- * @brief Threads synchronization APIs.\r
- * @details If enabled then the @p chThdWait() function is included in\r
- * the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_WAITEXIT TRUE\r
-\r
-/**\r
- * @brief Semaphores APIs.\r
- * @details If enabled then the Semaphores APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_SEMAPHORES TRUE\r
-\r
-/**\r
- * @brief Semaphores queuing mode.\r
- * @details If enabled then the threads are enqueued on semaphores by\r
- * priority rather than in FIFO order.\r
- *\r
- * @note The default is @p FALSE. Enable this if you have special\r
- * requirements.\r
- * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
- */\r
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE\r
-\r
-/**\r
- * @brief Mutexes APIs.\r
- * @details If enabled then the mutexes APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MUTEXES TRUE\r
-\r
-/**\r
- * @brief Enables recursive behavior on mutexes.\r
- * @note Recursive mutexes are heavier and have an increased\r
- * memory footprint.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note Requires @p CH_CFG_USE_MUTEXES.\r
- */\r
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE\r
-\r
-/**\r
- * @brief Conditional Variables APIs.\r
- * @details If enabled then the conditional variables APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_MUTEXES.\r
- */\r
-#define CH_CFG_USE_CONDVARS TRUE\r
-\r
-/**\r
- * @brief Conditional Variables APIs with timeout.\r
- * @details If enabled then the conditional variables APIs with timeout\r
- * specification are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_CONDVARS.\r
- */\r
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE\r
-\r
-/**\r
- * @brief Events Flags APIs.\r
- * @details If enabled then the event flags APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_EVENTS TRUE\r
-\r
-/**\r
- * @brief Events Flags APIs with timeout.\r
- * @details If enabled then the events APIs with timeout specification\r
- * are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_EVENTS.\r
- */\r
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE\r
-\r
-/**\r
- * @brief Synchronous Messages APIs.\r
- * @details If enabled then the synchronous messages APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MESSAGES TRUE\r
-\r
-/**\r
- * @brief Synchronous Messages queuing mode.\r
- * @details If enabled then messages are served by priority rather than in\r
- * FIFO order.\r
- *\r
- * @note The default is @p FALSE. Enable this if you have special\r
- * requirements.\r
- * @note Requires @p CH_CFG_USE_MESSAGES.\r
- */\r
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE\r
-\r
-/**\r
- * @brief Mailboxes APIs.\r
- * @details If enabled then the asynchronous messages (mailboxes) APIs are\r
- * included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
- */\r
-#define CH_CFG_USE_MAILBOXES TRUE\r
-\r
-/**\r
- * @brief Core Memory Manager APIs.\r
- * @details If enabled then the core memory manager APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MEMCORE TRUE\r
-\r
-/**\r
- * @brief Heap Allocator APIs.\r
- * @details If enabled then the memory heap allocator APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or\r
- * @p CH_CFG_USE_SEMAPHORES.\r
- * @note Mutexes are recommended.\r
- */\r
-#define CH_CFG_USE_HEAP TRUE\r
-\r
-/**\r
- * @brief Memory Pools Allocator APIs.\r
- * @details If enabled then the memory pools allocator APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MEMPOOLS TRUE\r
-\r
-/**\r
- * @brief Dynamic Threads APIs.\r
- * @details If enabled then the dynamic threads creation APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_WAITEXIT.\r
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.\r
- */\r
-#define CH_CFG_USE_DYNAMIC TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Debug options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Debug option, kernel statistics.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_STATISTICS FALSE\r
-\r
-/**\r
- * @brief Debug option, system state check.\r
- * @details If enabled the correct call protocol for system APIs is checked\r
- * at runtime.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE\r
-\r
-/**\r
- * @brief Debug option, parameters checks.\r
- * @details If enabled then the checks on the API functions input\r
- * parameters are activated.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_ENABLE_CHECKS TRUE\r
-\r
-/**\r
- * @brief Debug option, consistency checks.\r
- * @details If enabled then all the assertions in the kernel code are\r
- * activated. This includes consistency checks inside the kernel,\r
- * runtime anomalies and port-defined checks.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_ENABLE_ASSERTS TRUE\r
-\r
-/**\r
- * @brief Debug option, trace buffer.\r
- * @details If enabled then the trace buffer is activated.\r
- *\r
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.\r
- */\r
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED\r
-\r
-/**\r
- * @brief Trace buffer entries.\r
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is\r
- * different from @p CH_DBG_TRACE_MASK_DISABLED.\r
- */\r
-#define CH_DBG_TRACE_BUFFER_SIZE 128\r
-\r
-/**\r
- * @brief Debug option, stack checks.\r
- * @details If enabled then a runtime stack check is performed.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note The stack check is performed in a architecture/port dependent way.\r
- * It may not be implemented or some ports.\r
- * @note The default failure mode is to halt the system with the global\r
- * @p panic_msg variable set to @p NULL.\r
- */\r
-#define CH_DBG_ENABLE_STACK_CHECK TRUE\r
-\r
-/**\r
- * @brief Debug option, stacks initialization.\r
- * @details If enabled then the threads working area is filled with a byte\r
- * value when a thread is created. This can be useful for the\r
- * runtime measurement of the used stack.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_FILL_THREADS TRUE\r
-\r
-/**\r
- * @brief Debug option, threads profiling.\r
- * @details If enabled then a field is added to the @p thread_t structure that\r
- * counts the system ticks occurred while executing the thread.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note This debug option is not currently compatible with the\r
- * tickless mode.\r
- */\r
-#define CH_DBG_THREADS_PROFILING FALSE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Kernel hooks\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Threads descriptor structure extension.\r
- * @details User fields added to the end of the @p thread_t structure.\r
- */\r
-#define CH_CFG_THREAD_EXTRA_FIELDS \\r
- /* Add threads custom fields here.*/\r
-\r
-/**\r
- * @brief Threads initialization hook.\r
- * @details User initialization code added to the @p chThdInit() API.\r
- *\r
- * @note It is invoked from within @p chThdInit() and implicitly from all\r
- * the threads creation APIs.\r
- */\r
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \\r
- /* Add threads initialization code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Threads finalization hook.\r
- * @details User finalization code added to the @p chThdExit() API.\r
- */\r
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \\r
- /* Add threads finalization code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Context switch hook.\r
- * @details This hook is invoked just before switching between threads.\r
- */\r
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \\r
- /* Context switch code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief ISR enter hook.\r
- */\r
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \\r
- /* IRQ prologue code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief ISR exit hook.\r
- */\r
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \\r
- /* IRQ epilogue code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle thread enter hook.\r
- * @note This hook is invoked within a critical zone, no OS functions\r
- * should be invoked from here.\r
- * @note This macro can be used to activate a power saving mode.\r
- */\r
-#define CH_CFG_IDLE_ENTER_HOOK() { \\r
- /* Idle-enter code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle thread leave hook.\r
- * @note This hook is invoked within a critical zone, no OS functions\r
- * should be invoked from here.\r
- * @note This macro can be used to deactivate a power saving mode.\r
- */\r
-#define CH_CFG_IDLE_LEAVE_HOOK() { \\r
- /* Idle-leave code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle Loop hook.\r
- * @details This hook is continuously invoked by the idle thread loop.\r
- */\r
-#define CH_CFG_IDLE_LOOP_HOOK() { \\r
- /* Idle loop code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief System tick event hook.\r
- * @details This hook is invoked in the system tick handler immediately\r
- * after processing the virtual timers queue.\r
- */\r
-#define CH_CFG_SYSTEM_TICK_HOOK() { \\r
- /* System tick event code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief System halt hook.\r
- * @details This hook is invoked in case to a system halting error before\r
- * the system is halted.\r
- */\r
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \\r
- /* System halt code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Trace hook.\r
- * @details This hook is invoked each time a new record is written in the\r
- * trace buffer.\r
- */\r
-#define CH_CFG_TRACE_HOOK(tep) { \\r
- /* Trace code here.*/ \\r
-}\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/* Port-specific settings (override port settings defaulted in chcore.h). */\r
-/*===========================================================================*/\r
-\r
-#endif /* CHCONF_H */\r
-\r
-/** @} */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/**\r
- * @file templates/halconf.h\r
- * @brief HAL configuration header.\r
- * @details HAL configuration file, this file allows to enable or disable the\r
- * various device drivers from your application. You may also use\r
- * this file in order to override the device drivers default settings.\r
- *\r
- * @addtogroup HAL_CONF\r
- * @{\r
- */\r
-\r
-#ifndef _HALCONF_H_\r
-#define _HALCONF_H_\r
-\r
-#include "mcuconf.h"\r
-\r
-/**\r
- * @brief Enables the PAL subsystem.\r
- */\r
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)\r
-#define HAL_USE_PAL TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the ADC subsystem.\r
- */\r
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)\r
-#define HAL_USE_ADC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the CAN subsystem.\r
- */\r
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)\r
-#define HAL_USE_CAN FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the DAC subsystem.\r
- */\r
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)\r
-#define HAL_USE_DAC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the EXT subsystem.\r
- */\r
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)\r
-#define HAL_USE_EXT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the GPT subsystem.\r
- */\r
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)\r
-#define HAL_USE_GPT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the I2C subsystem.\r
- */\r
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)\r
-#define HAL_USE_I2C FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the I2S subsystem.\r
- */\r
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)\r
-#define HAL_USE_I2S FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the ICU subsystem.\r
- */\r
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)\r
-#define HAL_USE_ICU FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the MAC subsystem.\r
- */\r
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)\r
-#define HAL_USE_MAC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the MMC_SPI subsystem.\r
- */\r
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)\r
-#define HAL_USE_MMC_SPI FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the PWM subsystem.\r
- */\r
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)\r
-#define HAL_USE_PWM FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the RTC subsystem.\r
- */\r
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)\r
-#define HAL_USE_RTC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SDC subsystem.\r
- */\r
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)\r
-#define HAL_USE_SDC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SERIAL subsystem.\r
- */\r
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)\r
-#define HAL_USE_SERIAL FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SERIAL over USB subsystem.\r
- */\r
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)\r
-#define HAL_USE_SERIAL_USB FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SPI subsystem.\r
- */\r
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)\r
-#define HAL_USE_SPI FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the UART subsystem.\r
- */\r
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)\r
-#define HAL_USE_UART FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the USB subsystem.\r
- */\r
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)\r
-#define HAL_USE_USB TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the WDG subsystem.\r
- */\r
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)\r
-#define HAL_USE_WDG FALSE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* USB driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables synchronous APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)\r
-#define USB_USE_WAIT TRUE\r
-#endif\r
-\r
-#endif /* _HALCONF_H_ */\r
-\r
-/** @} */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-#define KL2x_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#if 1\r
-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */\r
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE\r
-#define KINETIS_PLLCLK_FREQUENCY 96000000UL\r
-#define KINETIS_SYSCLK_FREQUENCY 48000000UL\r
-#endif\r
-\r
-#if 0\r
-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */\r
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI\r
-#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */\r
-#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */\r
-#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */\r
-#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */\r
-#endif\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define KINETIS_SERIAL_USE_UART0 TRUE\r
-\r
-/*\r
- * USB driver settings\r
- */\r
-#define KINETIS_USB_USE_USB0 TRUE\r
-/* Need to redefine this, since the default is for K20x */\r
-/* This is for Teensy LC; you should comment it out (or change to 5)\r
- * for Teensy 3.x */\r
-#define KINETIS_USB_USB0_IRQ_PRIORITY 2\r
-\r
-#endif /* _MCUCONF_H_ */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY 96000000UL
+#define KINETIS_SYSCLK_FREQUENCY 48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+#endif /* _MCUCONF_H_ */
ifndef MAKEFILE_INCLUDED
include ../../Makefile
-endif
\ No newline at end of file
+endif
-/*\r
-Copyright 2012 Jun Wako <wakojun@gmail.com>\r
-\r
-This program is free software: you can redistribute it and/or modify\r
-it under the terms of the GNU General Public License as published by\r
-the Free Software Foundation, either version 2 of the License, or\r
-(at your option) any later version.\r
-\r
-This program is distributed in the hope that it will be useful,\r
-but WITHOUT ANY WARRANTY; without even the implied warranty of\r
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
-GNU General Public License for more details.\r
-\r
-You should have received a copy of the GNU General Public License\r
-along with this program. If not, see <http://www.gnu.org/licenses/>.\r
-*/\r
-\r
-#ifndef CONFIG_H\r
-#define CONFIG_H\r
-\r
-#include "config_common.h"\r
-\r
-/* USB Device descriptor parameter */\r
-#define VENDOR_ID 0xFEED\r
-#define PRODUCT_ID 0x6060\r
-#define DEVICE_VER 0x0001\r
-#define MANUFACTURER geekhack\r
-#define PRODUCT GH60\r
-#define DESCRIPTION t.m.k. keyboard firmware for GH60\r
-\r
-/* key matrix size */\r
-#define MATRIX_ROWS 5\r
-#define MATRIX_COLS 14\r
-\r
-/*\r
- * Keyboard Matrix Assignments\r
- *\r
- * Change this to how you wired your keyboard\r
- * COLS: AVR pins used for columns, left to right\r
- * ROWS: AVR pins used for rows, top to bottom\r
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)\r
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)\r
- *\r
-*/\r
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }\r
-// Rev A\r
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }\r
-// Rev B/C\r
- #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }\r
-#define UNUSED_PINS\r
-\r
-/* COL2ROW or ROW2COL */\r
-#define DIODE_DIRECTION COL2ROW\r
-\r
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */\r
-#define DEBOUNCING_DELAY 5\r
-\r
-/* define if matrix has ghost (lacks anti-ghosting diodes) */\r
-//#define MATRIX_HAS_GHOST\r
-\r
-/* number of backlight levels */\r
-#define BACKLIGHT_LEVELS 3\r
-\r
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */\r
-#define LOCKING_SUPPORT_ENABLE\r
-/* Locking resynchronize hack */\r
-#define LOCKING_RESYNC_ENABLE\r
-\r
-/*\r
- * Force NKRO\r
- *\r
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved\r
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the\r
- * makefile for this to work.)\r
- *\r
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)\r
- * until the next keyboard reset.\r
- *\r
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is\r
- * fully operational during normal computer usage.\r
- *\r
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)\r
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by\r
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a\r
- * power-up.\r
- *\r
- */\r
-//#define FORCE_NKRO\r
-\r
-/*\r
- * Magic Key Options\r
- *\r
- * Magic keys are hotkey commands that allow control over firmware functions of\r
- * the keyboard. They are best used in combination with the HID Listen program,\r
- * found here: https://www.pjrc.com/teensy/hid_listen.html\r
- *\r
- * The options below allow the magic key functionality to be changed. This is\r
- * useful if your keyboard/keypad is missing keys and you want magic key support.\r
- *\r
- */\r
-\r
-/* key combination for magic key command */\r
-#define IS_COMMAND() ( \\r
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \\r
-)\r
-\r
-/* control how magic key switches layers */\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false\r
-\r
-/* override magic key keymap */\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM\r
-//#define MAGIC_KEY_HELP1 H\r
-//#define MAGIC_KEY_HELP2 SLASH\r
-//#define MAGIC_KEY_DEBUG D\r
-//#define MAGIC_KEY_DEBUG_MATRIX X\r
-//#define MAGIC_KEY_DEBUG_KBD K\r
-//#define MAGIC_KEY_DEBUG_MOUSE M\r
-//#define MAGIC_KEY_VERSION V\r
-//#define MAGIC_KEY_STATUS S\r
-//#define MAGIC_KEY_CONSOLE C\r
-//#define MAGIC_KEY_LAYER0_ALT1 ESC\r
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE\r
-//#define MAGIC_KEY_LAYER0 0\r
-//#define MAGIC_KEY_LAYER1 1\r
-//#define MAGIC_KEY_LAYER2 2\r
-//#define MAGIC_KEY_LAYER3 3\r
-//#define MAGIC_KEY_LAYER4 4\r
-//#define MAGIC_KEY_LAYER5 5\r
-//#define MAGIC_KEY_LAYER6 6\r
-//#define MAGIC_KEY_LAYER7 7\r
-//#define MAGIC_KEY_LAYER8 8\r
-//#define MAGIC_KEY_LAYER9 9\r
-//#define MAGIC_KEY_BOOTLOADER PAUSE\r
-//#define MAGIC_KEY_LOCK CAPS\r
-//#define MAGIC_KEY_EEPROM E\r
-//#define MAGIC_KEY_NKRO N\r
-//#define MAGIC_KEY_SLEEP_LED Z\r
-\r
-/*\r
- * Feature disable options\r
- * These options are also useful to firmware size reduction.\r
- */\r
-\r
-/* disable debug print */\r
-//#define NO_DEBUG\r
-\r
-/* disable print */\r
-//#define NO_PRINT\r
-\r
-/* disable action features */\r
-//#define NO_ACTION_LAYER\r
-//#define NO_ACTION_TAPPING\r
-//#define NO_ACTION_ONESHOT\r
-//#define NO_ACTION_MACRO\r
-//#define NO_ACTION_FUNCTION\r
-\r
-#endif\r
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT GH60
+#define DESCRIPTION t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+ #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
-#include "gh60.h"\r
-\r
-void led_set_kb(uint8_t usb_led) {\r
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here\r
- \r
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {\r
- gh60_caps_led_on();\r
- } else {\r
- gh60_caps_led_off(); \r
- }\r
- \r
- // if (usb_led & (1<<USB_LED_NUM_LOCK)) {\r
- // gh60_esc_led_on();\r
- // } else {\r
- // gh60_esc_led_off(); \r
- // }\r
- \r
- // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {\r
- // gh60_fn_led_on();\r
- // } else {\r
- // gh60_fn_led_off(); \r
- // }\r
-\r
- led_set_user(usb_led); \r
-}\r
+#include "gh60.h"
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ gh60_caps_led_on();
+ } else {
+ gh60_caps_led_off();
+ }
+
+ // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+ // gh60_esc_led_on();
+ // } else {
+ // gh60_esc_led_off();
+ // }
+
+ // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+ // gh60_fn_led_on();
+ // } else {
+ // gh60_fn_led_off();
+ // }
+
+ led_set_user(usb_led);
+}
-#ifndef GH60_H\r
-#define GH60_H\r
-\r
-#include "quantum.h"\r
-#include "led.h"\r
-\r
-/* GH60 LEDs \r
- * GPIO pads\r
- * 0 F7 WASD LEDs\r
- * 1 F6 ESC LED\r
- * 2 F5 FN LED\r
- * 3 F4 POKER Arrow LEDs\r
- * B2 Capslock LED\r
- * B0 not connected\r
- */\r
-inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }\r
-inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }\r
-inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }\r
-inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }\r
-inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }\r
-\r
-inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }\r
-inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }\r
-inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }\r
-inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }\r
-inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }\r
-\r
-/* GH60 keymap definition macro\r
- * K2C, K31 and K3C are extra keys for ISO\r
- */\r
-#define KEYMAP( \\r
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \\r
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \\r
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \\r
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \\r
- K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \\r
-) { \\r
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \\r
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \\r
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \\r
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \\r
- { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \\r
-}\r
-\r
-/* ANSI valiant. No extra keys for ISO */\r
-#define KEYMAP_ANSI( \\r
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \\r
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \\r
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \\r
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \\r
- K40, K41, K42, K45, K4A, K4B, K4C, K4D \\r
-) KEYMAP( \\r
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \\r
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \\r
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \\r
- K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \\r
- K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \\r
-)\r
-\r
-#define KEYMAP_HHKB( \\r
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\\r
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \\r
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \\r
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \\r
- K40, K41, K42, K45, K4A, K4B, K4C, K4D \\r
-) KEYMAP( \\r
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \\r
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \\r
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \\r
- K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \\r
- K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \\r
-)\r
-\r
-#endif\r
+#ifndef GH60_H
+#define GH60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* GH60 LEDs
+ * GPIO pads
+ * 0 F7 WASD LEDs
+ * 1 F6 ESC LED
+ * 2 F5 FN LED
+ * 3 F4 POKER Arrow LEDs
+ * B2 Capslock LED
+ * B0 not connected
+ */
+inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
+
+inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* GH60 keymap definition macro
+ * K2C, K31 and K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
+}
+
+/* ANSI valiant. No extra keys for ISO */
+#define KEYMAP_ANSI( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
+) KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
+ K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
+ K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
+)
+
+#define KEYMAP_HHKB( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
+ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
+) KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
+ K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
+)
+
+#endif
-#----------------------------------------------------------------------------\r
-# On command line:\r
-#\r
-# make all = Make software.\r
-#\r
-# make clean = Clean out built project files.\r
-#\r
-# make coff = Convert ELF to AVR COFF.\r
-#\r
-# make extcoff = Convert ELF to AVR Extended COFF.\r
-#\r
-# make program = Download the hex file to the device.\r
-# Please customize your programmer settings(PROGRAM_CMD)\r
-#\r
-# make teensy = Download the hex file to the device, using teensy_loader_cli.\r
-# (must have teensy_loader_cli installed).\r
-#\r
-# make dfu = Download the hex file to the device, using dfu-programmer (must\r
-# have dfu-programmer installed).\r
-#\r
-# make flip = Download the hex file to the device, using Atmel FLIP (must\r
-# have Atmel FLIP installed).\r
-#\r
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
-# (must have dfu-programmer installed).\r
-#\r
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
-# (must have Atmel FLIP installed).\r
-#\r
-# make debug = Start either simulavr or avarice as specified for debugging, \r
-# with avr-gdb or avr-insight as the front end for debugging.\r
-#\r
-# make filename.s = Just compile filename.c into the assembler code only.\r
-#\r
-# make filename.i = Create a preprocessed source file for use in submitting\r
-# bug reports to the GCC project.\r
-#\r
-# To rebuild project do "make clean" then "make all".\r
-#----------------------------------------------------------------------------\r
-\r
-# MCU name\r
-#MCU = at90usb1287\r
-MCU = atmega32u4\r
-\r
-# Processor frequency.\r
-# This will define a symbol, F_CPU, in all source code files equal to the\r
-# processor frequency in Hz. You can then use this symbol in your source code to\r
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
-# automatically to create a 32-bit value in your source code.\r
-#\r
-# This will be an integer division of F_USB below, as it is sourced by\r
-# F_USB after it has run through any CPU prescalers. Note that this value\r
-# does not *change* the processor frequency - it should merely be updated to\r
-# reflect the processor speed set externally so that the code can use accurate\r
-# software delays.\r
-F_CPU = 16000000\r
-\r
-\r
-#\r
-# LUFA specific\r
-#\r
-# Target architecture (see library "Board Types" documentation).\r
-ARCH = AVR8\r
-\r
-# Input clock frequency.\r
-# This will define a symbol, F_USB, in all source code files equal to the\r
-# input clock frequency (before any prescaling is performed) in Hz. This value may\r
-# differ from F_CPU if prescaling is used on the latter, and is required as the\r
-# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
-# at the end, this will be done automatically to create a 32-bit value in your\r
-# source code.\r
-#\r
-# If no clock division is performed on the input clock inside the AVR (via the\r
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
-F_USB = $(F_CPU)\r
-\r
-# Interrupt driven control endpoint task(+60)\r
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT\r
-\r
-\r
-# Boot Section Size in *bytes*\r
-# Teensy halfKay 512\r
-# Teensy++ halfKay 1024\r
-# Atmel DFU loader 4096\r
-# LUFA bootloader 4096\r
-# USBaspLoader 2048\r
-OPT_DEFS += -DBOOTLOADER_SIZE=4096\r
-\r
-\r
-# Build Options\r
-# comment out to disable the options.\r
-#\r
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)\r
-MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)\r
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)\r
-# CONSOLE_ENABLE ?= yes # Console for debug(+400)\r
-# COMMAND_ENABLE ?= yes # Commands for debug and configuration\r
-KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key\r
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE\r
-# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend\r
-NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work\r
-# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality\r
-# MIDI_ENABLE ?= YES # MIDI controls\r
-# UNICODE_ENABLE ?= YES # Unicode\r
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID\r
-RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow\r
-\r
-ifndef QUANTUM_DIR\r
- include ../../../../Makefile\r
-endif\r
-\r
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes # Console for debug(+400)
+# COMMAND_ENABLE ?= yes # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
-/*\r
-Copyright 2012 Jun Wako <wakojun@gmail.com>\r
-\r
-This program is free software: you can redistribute it and/or modify\r
-it under the terms of the GNU General Public License as published by\r
-the Free Software Foundation, either version 2 of the License, or\r
-(at your option) any later version.\r
-\r
-This program is distributed in the hope that it will be useful,\r
-but WITHOUT ANY WARRANTY; without even the implied warranty of\r
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
-GNU General Public License for more details.\r
-\r
-You should have received a copy of the GNU General Public License\r
-along with this program. If not, see <http://www.gnu.org/licenses/>.\r
-*/\r
-\r
-#ifndef CONFIG_H\r
-#define CONFIG_H\r
-\r
-#include "config_common.h"\r
-\r
-/* USB Device descriptor parameter */\r
-#define VENDOR_ID 0xFEED\r
-#define PRODUCT_ID 0x6060\r
-#define DEVICE_VER 0x0001\r
-#define MANUFACTURER geekhack\r
-#define PRODUCT GH60\r
-#define DESCRIPTION t.m.k. keyboard firmware for GH60\r
-\r
-/* key matrix size */\r
-#define MATRIX_ROWS 5\r
-#define MATRIX_COLS 14\r
-\r
-/*\r
- * Keyboard Matrix Assignments\r
- *\r
- * Change this to how you wired your keyboard\r
- * COLS: AVR pins used for columns, left to right\r
- * ROWS: AVR pins used for rows, top to bottom\r
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)\r
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)\r
- *\r
-*/\r
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }\r
-// Rev A\r
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }\r
-// Rev B/C\r
- #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }\r
-#define UNUSED_PINS\r
-\r
-/* COL2ROW or ROW2COL */\r
-#define DIODE_DIRECTION COL2ROW\r
-\r
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */\r
-#define DEBOUNCING_DELAY 5\r
-\r
-/* define if matrix has ghost (lacks anti-ghosting diodes) */\r
-//#define MATRIX_HAS_GHOST\r
-\r
-/* number of backlight levels */\r
-#define BACKLIGHT_LEVELS 3\r
-\r
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */\r
-#define LOCKING_SUPPORT_ENABLE\r
-/* Locking resynchronize hack */\r
-#define LOCKING_RESYNC_ENABLE\r
-\r
-/*\r
- * Force NKRO\r
- *\r
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved\r
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the\r
- * makefile for this to work.)\r
- *\r
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)\r
- * until the next keyboard reset.\r
- *\r
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is\r
- * fully operational during normal computer usage.\r
- *\r
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)\r
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by\r
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a\r
- * power-up.\r
- *\r
- */\r
-//#define FORCE_NKRO\r
-\r
-/*\r
- * Magic Key Options\r
- *\r
- * Magic keys are hotkey commands that allow control over firmware functions of\r
- * the keyboard. They are best used in combination with the HID Listen program,\r
- * found here: https://www.pjrc.com/teensy/hid_listen.html\r
- *\r
- * The options below allow the magic key functionality to be changed. This is\r
- * useful if your keyboard/keypad is missing keys and you want magic key support.\r
- *\r
- */\r
-\r
-/* key combination for magic key command */\r
-#define IS_COMMAND() ( \\r
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \\r
-)\r
-\r
-/* control how magic key switches layers */\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false\r
-\r
-/* override magic key keymap */\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS\r
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM\r
-//#define MAGIC_KEY_HELP1 H\r
-//#define MAGIC_KEY_HELP2 SLASH\r
-//#define MAGIC_KEY_DEBUG D\r
-//#define MAGIC_KEY_DEBUG_MATRIX X\r
-//#define MAGIC_KEY_DEBUG_KBD K\r
-//#define MAGIC_KEY_DEBUG_MOUSE M\r
-//#define MAGIC_KEY_VERSION V\r
-//#define MAGIC_KEY_STATUS S\r
-//#define MAGIC_KEY_CONSOLE C\r
-//#define MAGIC_KEY_LAYER0_ALT1 ESC\r
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE\r
-//#define MAGIC_KEY_LAYER0 0\r
-//#define MAGIC_KEY_LAYER1 1\r
-//#define MAGIC_KEY_LAYER2 2\r
-//#define MAGIC_KEY_LAYER3 3\r
-//#define MAGIC_KEY_LAYER4 4\r
-//#define MAGIC_KEY_LAYER5 5\r
-//#define MAGIC_KEY_LAYER6 6\r
-//#define MAGIC_KEY_LAYER7 7\r
-//#define MAGIC_KEY_LAYER8 8\r
-//#define MAGIC_KEY_LAYER9 9\r
-//#define MAGIC_KEY_BOOTLOADER PAUSE\r
-//#define MAGIC_KEY_LOCK CAPS\r
-//#define MAGIC_KEY_EEPROM E\r
-//#define MAGIC_KEY_NKRO N\r
-//#define MAGIC_KEY_SLEEP_LED Z\r
-\r
-/*\r
- * Feature disable options\r
- * These options are also useful to firmware size reduction.\r
- */\r
-\r
-/* disable debug print */\r
-//#define NO_DEBUG\r
-\r
-/* disable print */\r
-//#define NO_PRINT\r
-\r
-/* disable action features */\r
-//#define NO_ACTION_LAYER\r
-//#define NO_ACTION_TAPPING\r
-//#define NO_ACTION_ONESHOT\r
-//#define NO_ACTION_MACRO\r
-//#define NO_ACTION_FUNCTION\r
-\r
-/*\r
- * RGB Underglow\r
- * These settings are for the F4 by default:\r
- * \r
- *\r
- * #define ws2812_PORTREG PORTF\r
- * #define ws2812_DDRREG DDRF\r
- * #define ws2812_pin PF4\r
- * #define RGBLED_NUM 14 // Number of LEDs\r
- * #define RGBLIGHT_HUE_STEP 10\r
- * #define RGBLIGHT_SAT_STEP 17\r
- * #define RGBLIGHT_VAL_STEP 17\r
- *\r
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. \r
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. \r
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c\r
-*/\r
-\r
-/* Deprecated code below\r
-#define ws2812_PORTREG PORTF \r
-#define ws2812_DDRREG DDRF\r
-#define ws2812_pin PF4\r
-*/ \r
-#define RGB_DI_PIN F4\r
-#define RGBLIGHT_TIMER\r
-#define RGBLED_NUM 8 // Number of LEDs\r
-#define RGBLIGHT_HUE_STEP 8\r
-#define RGBLIGHT_SAT_STEP 8\r
-#define RGBLIGHT_VAL_STEP 8\r
-#endif\r
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT GH60
+#define DESCRIPTION t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+ #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ *
+ *
+ * #define ws2812_PORTREG PORTF
+ * #define ws2812_DDRREG DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14 // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG PORTF
+#define ws2812_DDRREG DDRF
+#define ws2812_pin PF4
+*/
+#define RGB_DI_PIN F4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
- /* Column pin configuration\r
- * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13\r
- * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)\r
- */\r
- \r
- /* Row pin configuration\r
- * row: 0 1 2 3 4\r
- * pin: D0 D1 D2 D3 D5\r
- */\r
- \r
- GPIO pads\r
- 0 F7 WASD LEDs\r
- 1 F6 ESC LED\r
- 2 F5 FN LED\r
- 3 F4 POKER Arrow LEDs\r
- \r
- B2 Capslock LED\r
+ /* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
+ */
+
+ /* Row pin configuration
+ * row: 0 1 2 3 4
+ * pin: D0 D1 D2 D3 D5
+ */
+
+ GPIO pads
+ 0 F7 WASD LEDs
+ 1 F6 ESC LED
+ 2 F5 FN LED
+ 3 F4 POKER Arrow LEDs
+
+ B2 Capslock LED
B0 not connected
\ No newline at end of file
-## gh60 Rev C keyboard firmware\r
-\r
-\r
-\r
- /* Column pin configuration\r
- * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13\r
- * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)\r
- */\r
- \r
- /* Row pin configuration\r
- * row: 0 1 2 3 4\r
- * pin: D0 D1 D2 D3 D5\r
- */\r
- \r
- GPIO pads\r
- 0 F7 WASD LEDs\r
- 1 F6 ESC LED\r
- 2 F5 FN LED\r
- 3 F4 POKER Arrow LEDs\r
- \r
- B2 Capslock LED\r
- B0 not connected\r
- \r
-Functions to controls LED clusters\r
- \r
- gh60_caps_led_on()\r
- gh60_poker_leds_on()\r
- gh60_fn_led_on()\r
- gh60_esc_led_on()\r
- gh60_wasd_leds_on()\r
- \r
- gh60_caps_led_off()\r
- gh60_poker_leds_off()\r
- gh60_fn_led_off()\r
- gh60_esc_led_off()\r
- gh60_wasd_leds_off()\r
- \r
-======================\r
-\r
-## Quantum MK Firmware\r
-\r
-For the full Quantum feature list, see [the parent readme.md](/readme.md).\r
-\r
-## Building\r
-\r
-Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. \r
-\r
-Depending on which keymap you would like to use, you will have to compile slightly differently.\r
-\r
-### Default\r
-To build with the default keymap, simply run `make default`.\r
-\r
-### Other Keymaps\r
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.\r
-\r
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:\r
-\r
-```\r
-$ make [default|jack|<name>]\r
-```\r
-\r
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.\r
+## gh60 Rev C keyboard firmware
+
+
+
+ /* Column pin configuration
+ * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
+ */
+
+ /* Row pin configuration
+ * row: 0 1 2 3 4
+ * pin: D0 D1 D2 D3 D5
+ */
+
+ GPIO pads
+ 0 F7 WASD LEDs
+ 1 F6 ESC LED
+ 2 F5 FN LED
+ 3 F4 POKER Arrow LEDs
+
+ B2 Capslock LED
+ B0 not connected
+
+Functions to controls LED clusters
+
+ gh60_caps_led_on()
+ gh60_poker_leds_on()
+ gh60_fn_led_on()
+ gh60_esc_led_on()
+ gh60_wasd_leds_on()
+
+ gh60_caps_led_off()
+ gh60_poker_leds_off()
+ gh60_fn_led_off()
+ gh60_esc_led_off()
+ gh60_wasd_leds_off()
+
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/**\r
- * @file templates/chconf.h\r
- * @brief Configuration file template.\r
- * @details A copy of this file must be placed in each project directory, it\r
- * contains the application specific kernel settings.\r
- *\r
- * @addtogroup config\r
- * @details Kernel related settings and hooks.\r
- * @{\r
- */\r
-\r
-#ifndef CHCONF_H\r
-#define CHCONF_H\r
-\r
-#define _CHIBIOS_RT_CONF_\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name System timers settings\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief System time counter resolution.\r
- * @note Allowed values are 16 or 32 bits.\r
- */\r
-#define CH_CFG_ST_RESOLUTION 32\r
-\r
-/**\r
- * @brief System tick frequency.\r
- * @details Frequency of the system timer that drives the system ticks. This\r
- * setting also defines the system tick time unit.\r
- */\r
-#define CH_CFG_ST_FREQUENCY 1000\r
-\r
-/**\r
- * @brief Time delta constant for the tick-less mode.\r
- * @note If this value is zero then the system uses the classic\r
- * periodic tick. This value represents the minimum number\r
- * of ticks that is safe to specify in a timeout directive.\r
- * The value one is not valid, timeouts are rounded up to\r
- * this value.\r
- */\r
-#define CH_CFG_ST_TIMEDELTA 0\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Kernel parameters and options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Round robin interval.\r
- * @details This constant is the number of system ticks allowed for the\r
- * threads before preemption occurs. Setting this value to zero\r
- * disables the preemption for threads with equal priority and the\r
- * round robin becomes cooperative. Note that higher priority\r
- * threads can still preempt, the kernel is always preemptive.\r
- * @note Disabling the round robin preemption makes the kernel more compact\r
- * and generally faster.\r
- * @note The round robin preemption is not supported in tickless mode and\r
- * must be set to zero in that case.\r
- */\r
-#define CH_CFG_TIME_QUANTUM 20\r
-\r
-/**\r
- * @brief Managed RAM size.\r
- * @details Size of the RAM area to be managed by the OS. If set to zero\r
- * then the whole available RAM is used. The core memory is made\r
- * available to the heap allocator and/or can be used directly through\r
- * the simplified core memory allocator.\r
- *\r
- * @note In order to let the OS manage the whole RAM the linker script must\r
- * provide the @p __heap_base__ and @p __heap_end__ symbols.\r
- * @note Requires @p CH_CFG_USE_MEMCORE.\r
- */\r
-#define CH_CFG_MEMCORE_SIZE 0\r
-\r
-/**\r
- * @brief Idle thread automatic spawn suppression.\r
- * @details When this option is activated the function @p chSysInit()\r
- * does not spawn the idle thread. The application @p main()\r
- * function becomes the idle thread and must implement an\r
- * infinite loop.\r
- */\r
-#define CH_CFG_NO_IDLE_THREAD FALSE\r
-\r
-/* Use __WFI in the idle thread for waiting. Does lower the power\r
- * consumption. */\r
-#define CORTEX_ENABLE_WFI_IDLE TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Performance options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief OS optimization.\r
- * @details If enabled then time efficient rather than space efficient code\r
- * is used when two possible implementations exist.\r
- *\r
- * @note This is not related to the compiler optimization options.\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_OPTIMIZE_SPEED TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Subsystem options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Time Measurement APIs.\r
- * @details If enabled then the time measurement APIs are included in\r
- * the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_TM FALSE\r
-\r
-/**\r
- * @brief Threads registry APIs.\r
- * @details If enabled then the registry APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_REGISTRY TRUE\r
-\r
-/**\r
- * @brief Threads synchronization APIs.\r
- * @details If enabled then the @p chThdWait() function is included in\r
- * the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_WAITEXIT TRUE\r
-\r
-/**\r
- * @brief Semaphores APIs.\r
- * @details If enabled then the Semaphores APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_SEMAPHORES TRUE\r
-\r
-/**\r
- * @brief Semaphores queuing mode.\r
- * @details If enabled then the threads are enqueued on semaphores by\r
- * priority rather than in FIFO order.\r
- *\r
- * @note The default is @p FALSE. Enable this if you have special\r
- * requirements.\r
- * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
- */\r
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE\r
-\r
-/**\r
- * @brief Mutexes APIs.\r
- * @details If enabled then the mutexes APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MUTEXES TRUE\r
-\r
-/**\r
- * @brief Enables recursive behavior on mutexes.\r
- * @note Recursive mutexes are heavier and have an increased\r
- * memory footprint.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note Requires @p CH_CFG_USE_MUTEXES.\r
- */\r
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE\r
-\r
-/**\r
- * @brief Conditional Variables APIs.\r
- * @details If enabled then the conditional variables APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_MUTEXES.\r
- */\r
-#define CH_CFG_USE_CONDVARS TRUE\r
-\r
-/**\r
- * @brief Conditional Variables APIs with timeout.\r
- * @details If enabled then the conditional variables APIs with timeout\r
- * specification are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_CONDVARS.\r
- */\r
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE\r
-\r
-/**\r
- * @brief Events Flags APIs.\r
- * @details If enabled then the event flags APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_EVENTS TRUE\r
-\r
-/**\r
- * @brief Events Flags APIs with timeout.\r
- * @details If enabled then the events APIs with timeout specification\r
- * are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_EVENTS.\r
- */\r
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE\r
-\r
-/**\r
- * @brief Synchronous Messages APIs.\r
- * @details If enabled then the synchronous messages APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MESSAGES TRUE\r
-\r
-/**\r
- * @brief Synchronous Messages queuing mode.\r
- * @details If enabled then messages are served by priority rather than in\r
- * FIFO order.\r
- *\r
- * @note The default is @p FALSE. Enable this if you have special\r
- * requirements.\r
- * @note Requires @p CH_CFG_USE_MESSAGES.\r
- */\r
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE\r
-\r
-/**\r
- * @brief Mailboxes APIs.\r
- * @details If enabled then the asynchronous messages (mailboxes) APIs are\r
- * included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
- */\r
-#define CH_CFG_USE_MAILBOXES TRUE\r
-\r
-/**\r
- * @brief Core Memory Manager APIs.\r
- * @details If enabled then the core memory manager APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MEMCORE TRUE\r
-\r
-/**\r
- * @brief Heap Allocator APIs.\r
- * @details If enabled then the memory heap allocator APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or\r
- * @p CH_CFG_USE_SEMAPHORES.\r
- * @note Mutexes are recommended.\r
- */\r
-#define CH_CFG_USE_HEAP TRUE\r
-\r
-/**\r
- * @brief Memory Pools Allocator APIs.\r
- * @details If enabled then the memory pools allocator APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MEMPOOLS TRUE\r
-\r
-/**\r
- * @brief Dynamic Threads APIs.\r
- * @details If enabled then the dynamic threads creation APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_WAITEXIT.\r
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.\r
- */\r
-#define CH_CFG_USE_DYNAMIC TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Debug options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Debug option, kernel statistics.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_STATISTICS FALSE\r
-\r
-/**\r
- * @brief Debug option, system state check.\r
- * @details If enabled the correct call protocol for system APIs is checked\r
- * at runtime.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE\r
-\r
-/**\r
- * @brief Debug option, parameters checks.\r
- * @details If enabled then the checks on the API functions input\r
- * parameters are activated.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_ENABLE_CHECKS FALSE\r
-\r
-/**\r
- * @brief Debug option, consistency checks.\r
- * @details If enabled then all the assertions in the kernel code are\r
- * activated. This includes consistency checks inside the kernel,\r
- * runtime anomalies and port-defined checks.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_ENABLE_ASSERTS FALSE\r
-\r
-/**\r
- * @brief Debug option, trace buffer.\r
- * @details If enabled then the trace buffer is activated.\r
- *\r
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.\r
- */\r
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED\r
-\r
-/**\r
- * @brief Trace buffer entries.\r
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is\r
- * different from @p CH_DBG_TRACE_MASK_DISABLED.\r
- */\r
-#define CH_DBG_TRACE_BUFFER_SIZE 128\r
-\r
-/**\r
- * @brief Debug option, stack checks.\r
- * @details If enabled then a runtime stack check is performed.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note The stack check is performed in a architecture/port dependent way.\r
- * It may not be implemented or some ports.\r
- * @note The default failure mode is to halt the system with the global\r
- * @p panic_msg variable set to @p NULL.\r
- */\r
-#define CH_DBG_ENABLE_STACK_CHECK FALSE\r
-\r
-/**\r
- * @brief Debug option, stacks initialization.\r
- * @details If enabled then the threads working area is filled with a byte\r
- * value when a thread is created. This can be useful for the\r
- * runtime measurement of the used stack.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_FILL_THREADS FALSE\r
-\r
-/**\r
- * @brief Debug option, threads profiling.\r
- * @details If enabled then a field is added to the @p thread_t structure that\r
- * counts the system ticks occurred while executing the thread.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note This debug option is not currently compatible with the\r
- * tickless mode.\r
- */\r
-#define CH_DBG_THREADS_PROFILING FALSE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Kernel hooks\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Threads descriptor structure extension.\r
- * @details User fields added to the end of the @p thread_t structure.\r
- */\r
-#define CH_CFG_THREAD_EXTRA_FIELDS \\r
- /* Add threads custom fields here.*/\r
-\r
-/**\r
- * @brief Threads initialization hook.\r
- * @details User initialization code added to the @p chThdInit() API.\r
- *\r
- * @note It is invoked from within @p chThdInit() and implicitly from all\r
- * the threads creation APIs.\r
- */\r
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \\r
- /* Add threads initialization code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Threads finalization hook.\r
- * @details User finalization code added to the @p chThdExit() API.\r
- */\r
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \\r
- /* Add threads finalization code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Context switch hook.\r
- * @details This hook is invoked just before switching between threads.\r
- */\r
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \\r
- /* Context switch code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief ISR enter hook.\r
- */\r
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \\r
- /* IRQ prologue code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief ISR exit hook.\r
- */\r
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \\r
- /* IRQ epilogue code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle thread enter hook.\r
- * @note This hook is invoked within a critical zone, no OS functions\r
- * should be invoked from here.\r
- * @note This macro can be used to activate a power saving mode.\r
- */\r
-#define CH_CFG_IDLE_ENTER_HOOK() { \\r
- /* Idle-enter code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle thread leave hook.\r
- * @note This hook is invoked within a critical zone, no OS functions\r
- * should be invoked from here.\r
- * @note This macro can be used to deactivate a power saving mode.\r
- */\r
-#define CH_CFG_IDLE_LEAVE_HOOK() { \\r
- /* Idle-leave code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle Loop hook.\r
- * @details This hook is continuously invoked by the idle thread loop.\r
- */\r
-#define CH_CFG_IDLE_LOOP_HOOK() { \\r
- /* Idle loop code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief System tick event hook.\r
- * @details This hook is invoked in the system tick handler immediately\r
- * after processing the virtual timers queue.\r
- */\r
-#define CH_CFG_SYSTEM_TICK_HOOK() { \\r
- /* System tick event code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief System halt hook.\r
- * @details This hook is invoked in case to a system halting error before\r
- * the system is halted.\r
- */\r
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \\r
- /* System halt code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Trace hook.\r
- * @details This hook is invoked each time a new record is written in the\r
- * trace buffer.\r
- */\r
-#define CH_CFG_TRACE_HOOK(tep) { \\r
- /* Trace code here.*/ \\r
-}\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/* Port-specific settings (override port settings defaulted in chcore.h). */\r
-/*===========================================================================*/\r
-\r
-#endif /* CHCONF_H */\r
-\r
-/** @} */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/**\r
- * @file templates/halconf.h\r
- * @brief HAL configuration header.\r
- * @details HAL configuration file, this file allows to enable or disable the\r
- * various device drivers from your application. You may also use\r
- * this file in order to override the device drivers default settings.\r
- *\r
- * @addtogroup HAL_CONF\r
- * @{\r
- */\r
-\r
-#ifndef _HALCONF_H_\r
-#define _HALCONF_H_\r
-\r
-#include "mcuconf.h"\r
-\r
-/**\r
- * @brief Enables the PAL subsystem.\r
- */\r
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)\r
-#define HAL_USE_PAL TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the ADC subsystem.\r
- */\r
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)\r
-#define HAL_USE_ADC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the CAN subsystem.\r
- */\r
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)\r
-#define HAL_USE_CAN FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the DAC subsystem.\r
- */\r
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)\r
-#define HAL_USE_DAC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the EXT subsystem.\r
- */\r
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)\r
-#define HAL_USE_EXT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the GPT subsystem.\r
- */\r
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)\r
-#define HAL_USE_GPT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the I2C subsystem.\r
- */\r
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)\r
-#define HAL_USE_I2C FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the I2S subsystem.\r
- */\r
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)\r
-#define HAL_USE_I2S FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the ICU subsystem.\r
- */\r
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)\r
-#define HAL_USE_ICU FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the MAC subsystem.\r
- */\r
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)\r
-#define HAL_USE_MAC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the MMC_SPI subsystem.\r
- */\r
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)\r
-#define HAL_USE_MMC_SPI FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the PWM subsystem.\r
- */\r
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)\r
-#define HAL_USE_PWM FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the RTC subsystem.\r
- */\r
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)\r
-#define HAL_USE_RTC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SDC subsystem.\r
- */\r
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)\r
-#define HAL_USE_SDC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SERIAL subsystem.\r
- */\r
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)\r
-#define HAL_USE_SERIAL FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SERIAL over USB subsystem.\r
- */\r
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)\r
-#define HAL_USE_SERIAL_USB TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SPI subsystem.\r
- */\r
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)\r
-#define HAL_USE_SPI FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the UART subsystem.\r
- */\r
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)\r
-#define HAL_USE_UART FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the USB subsystem.\r
- */\r
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)\r
-#define HAL_USE_USB TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the WDG subsystem.\r
- */\r
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)\r
-#define HAL_USE_WDG FALSE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* ADC driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables synchronous APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)\r
-#define ADC_USE_WAIT TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)\r
-#define ADC_USE_MUTUAL_EXCLUSION TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* CAN driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Sleep mode related APIs inclusion switch.\r
- */\r
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)\r
-#define CAN_USE_SLEEP_MODE TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* I2C driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables the mutual exclusion APIs on the I2C bus.\r
- */\r
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)\r
-#define I2C_USE_MUTUAL_EXCLUSION TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* MAC driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables an event sources for incoming packets.\r
- */\r
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)\r
-#define MAC_USE_ZERO_COPY FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables an event sources for incoming packets.\r
- */\r
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)\r
-#define MAC_USE_EVENTS TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* MMC_SPI driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Delays insertions.\r
- * @details If enabled this options inserts delays into the MMC waiting\r
- * routines releasing some extra CPU time for the threads with\r
- * lower priority, this may slow down the driver a bit however.\r
- * This option is recommended also if the SPI driver does not\r
- * use a DMA channel and heavily loads the CPU.\r
- */\r
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)\r
-#define MMC_NICE_WAITING TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* SDC driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Number of initialization attempts before rejecting the card.\r
- * @note Attempts are performed at 10mS intervals.\r
- */\r
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)\r
-#define SDC_INIT_RETRY 100\r
-#endif\r
-\r
-/**\r
- * @brief Include support for MMC cards.\r
- * @note MMC support is not yet implemented so this option must be kept\r
- * at @p FALSE.\r
- */\r
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)\r
-#define SDC_MMC_SUPPORT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Delays insertions.\r
- * @details If enabled this options inserts delays into the MMC waiting\r
- * routines releasing some extra CPU time for the threads with\r
- * lower priority, this may slow down the driver a bit however.\r
- */\r
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)\r
-#define SDC_NICE_WAITING TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* SERIAL driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Default bit rate.\r
- * @details Configuration parameter, this is the baud rate selected for the\r
- * default configuration.\r
- */\r
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)\r
-#define SERIAL_DEFAULT_BITRATE 38400\r
-#endif\r
-\r
-/**\r
- * @brief Serial buffers size.\r
- * @details Configuration parameter, you can change the depth of the queue\r
- * buffers depending on the requirements of your application.\r
- * @note The default is 64 bytes for both the transmission and receive\r
- * buffers.\r
- */\r
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)\r
-#define SERIAL_BUFFERS_SIZE 16\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* SERIAL_USB driver related setting. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Serial over USB buffers size.\r
- * @details Configuration parameter, the buffer size must be a multiple of\r
- * the USB data endpoint maximum packet size.\r
- * @note The default is 64 bytes for both the transmission and receive\r
- * buffers.\r
- */\r
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)\r
-#define SERIAL_USB_BUFFERS_SIZE 256\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* SPI driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables synchronous APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)\r
-#define SPI_USE_WAIT TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)\r
-#define SPI_USE_MUTUAL_EXCLUSION TRUE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* USB driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables synchronous APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)\r
-#define USB_USE_WAIT TRUE\r
-#endif\r
-\r
-#endif /* _HALCONF_H_ */\r
-\r
-/** @} */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-#define K20x_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-\r
-/* Select the MCU clocking mode below by enabling the appropriate block. */\r
-\r
-#define KINETIS_NO_INIT FALSE\r
-\r
-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */\r
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI\r
-#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */\r
-#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */\r
-#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */\r
-#define KINETIS_CLKDIV1_OUTDIV1 1\r
-#define KINETIS_CLKDIV1_OUTDIV2 1\r
-#define KINETIS_CLKDIV1_OUTDIV4 2\r
-#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY\r
-#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define KINETIS_SERIAL_USE_UART0 TRUE\r
-\r
-/*\r
- * USB driver settings\r
- */\r
-#define KINETIS_USB_USE_USB0 TRUE\r
-/* Need to redefine this, since the default is for K20x */\r
-/* This is for Teensy LC; you should comment it out (or change to 5)\r
- * for Teensy 3.x */\r
-#define KINETIS_USB_USB0_IRQ_PRIORITY 2\r
-\r
-#endif /* _MCUCONF_H_ */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1 1
+#define KINETIS_CLKDIV1_OUTDIV2 1
+#define KINETIS_CLKDIV1_OUTDIV4 2
+#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+#endif /* _MCUCONF_H_ */
-;---------------------------------------------------------------------------;\r
-; Extended itoa, puts, printf and atoi (C)ChaN, 2011\r
-;---------------------------------------------------------------------------;\r
-\r
- // Base size is 152 bytes\r
-#define CR_CRLF 0 // Convert \n to \r\n (+10 bytes)\r
-#define USE_XPRINTF 1 // Enable xprintf function (+194 bytes)\r
-#define USE_XSPRINTF 0 // Add xsprintf function (+78 bytes)\r
-#define USE_XFPRINTF 0 // Add xfprintf function (+54 bytes)\r
-#define USE_XATOI 0 // Enable xatoi function (+182 bytes)\r
-\r
-\r
-#if FLASHEND > 0x1FFFF\r
-#error xitoa module does not support 256K devices\r
-#endif\r
-\r
-.nolist\r
-#include <avr/io.h> // Include device specific definitions.\r
-.list\r
-\r
-#ifdef SPM_PAGESIZE // Recent devices have "lpm Rd,Z+" and "movw".\r
-.macro _LPMI reg\r
- lpm \reg, Z+\r
-.endm\r
-.macro _MOVW dh,dl, sh,sl\r
- movw \dl, \sl\r
-.endm\r
-#else // Earlier devices do not have "lpm Rd,Z+" nor "movw".\r
-.macro _LPMI reg\r
- lpm\r
- mov \reg, r0\r
- adiw ZL, 1\r
-.endm\r
-.macro _MOVW dh,dl, sh,sl\r
- mov \dl, \sl\r
- mov \dh, \sh\r
-.endm\r
-#endif\r
-\r
-\r
-\r
-;---------------------------------------------------------------------------\r
-; Stub function to forward to user output function\r
-;\r
-;Prototype: void xputc (char chr // a character to be output\r
-; );\r
-;Size: 12/12 words\r
-\r
-.section .bss\r
-.global xfunc_out ; xfunc_out must be initialized before using this module.\r
-xfunc_out: .ds.w 1\r
-.section .text\r
-\r
-\r
-.func xputc\r
-.global xputc\r
-xputc:\r
-#if CR_CRLF\r
- cpi r24, 10 ;LF --> CRLF\r
- brne 1f ;\r
- ldi r24, 13 ;\r
- rcall 1f ;\r
- ldi r24, 10 ;/\r
-1:\r
-#endif\r
- push ZH\r
- push ZL\r
- lds ZL, xfunc_out+0 ;Pointer to the registered output function.\r
- lds ZH, xfunc_out+1 ;/\r
- sbiw ZL, 0 ;Skip if null\r
- breq 2f ;/\r
- icall\r
-2: pop ZL\r
- pop ZH\r
- ret\r
-.endfunc\r
-\r
-\r
-\r
-;---------------------------------------------------------------------------\r
-; Direct ROM string output\r
-;\r
-;Prototype: void xputs (const char *str_p // rom string to be output\r
-; );\r
-\r
-.func xputs\r
-.global xputs\r
-xputs:\r
- _MOVW ZH,ZL, r25,r24 ; Z = pointer to rom string\r
-1: _LPMI r24\r
- cpi r24, 0\r
- breq 2f\r
- rcall xputc\r
- rjmp 1b\r
-2: ret\r
-.endfunc\r
-\r
-\r
-;---------------------------------------------------------------------------\r
-; Extended direct numeral string output (32bit version)\r
-;\r
-;Prototype: void xitoa (long value, // value to be output\r
-; char radix, // radix\r
-; char width); // minimum width\r
-;\r
-\r
-.func xitoa\r
-.global xitoa\r
-xitoa:\r
- ;r25:r22 = value, r20 = base, r18 = digits\r
- clr r31 ;r31 = stack level\r
- ldi r30, ' ' ;r30 = sign\r
- ldi r19, ' ' ;r19 = filler\r
- sbrs r20, 7 ;When base indicates signd format and the value\r
- rjmp 0f ;is minus, add a '-'.\r
- neg r20 ;\r
- sbrs r25, 7 ;\r
- rjmp 0f ;\r
- ldi r30, '-' ;\r
- com r22 ;\r
- com r23 ;\r
- com r24 ;\r
- com r25 ;\r
- adc r22, r1 ;\r
- adc r23, r1 ;\r
- adc r24, r1 ;\r
- adc r25, r1 ;/\r
-0: sbrs r18, 7 ;When digits indicates zero filled,\r
- rjmp 1f ;filler is '0'.\r
- neg r18 ;\r
- ldi r19, '0' ;/\r
- ;----- string conversion loop\r
-1: ldi r21, 32 ;r26 = r25:r22 % r20\r
- clr r26 ;r25:r22 /= r20\r
-2: lsl r22 ;\r
- rol r23 ;\r
- rol r24 ;\r
- rol r25 ;\r
- rol r26 ;\r
- cp r26, r20 ;\r
- brcs 3f ;\r
- sub r26, r20 ;\r
- inc r22 ;\r
-3: dec r21 ;\r
- brne 2b ;/\r
- cpi r26, 10 ;r26 is a numeral digit '0'-'F'\r
- brcs 4f ;\r
- subi r26, -7 ;\r
-4: subi r26, -'0' ;/\r
- push r26 ;Stack it\r
- inc r31 ;/\r
- cp r22, r1 ;Repeat until r25:r22 gets zero\r
- cpc r23, r1 ;\r
- cpc r24, r1 ;\r
- cpc r25, r1 ;\r
- brne 1b ;/\r
-\r
- cpi r30, '-' ;Minus sign if needed\r
- brne 5f ;\r
- push r30 ;\r
- inc r31 ;/\r
-5: cp r31, r18 ;Filler\r
- brcc 6f ;\r
- push r19 ;\r
- inc r31 ;\r
- rjmp 5b ;/\r
-\r
-6: pop r24 ;Flush stacked digits and exit\r
- rcall xputc ;\r
- dec r31 ;\r
- brne 6b ;/\r
-\r
- ret\r
-.endfunc\r
-\r
-\r
-\r
-;---------------------------------------------------------------------------;\r
-; Formatted string output (16/32bit version)\r
-;\r
-;Prototype:\r
-; void __xprintf (const char *format_p, ...);\r
-; void __xsprintf(char*, const char *format_p, ...);\r
-; void __xfprintf(void(*func)(char), const char *format_p, ...);\r
-;\r
-\r
-#if USE_XPRINTF\r
-\r
-.func xvprintf\r
-xvprintf:\r
- ld ZL, Y+ ;Z = pointer to format string\r
- ld ZH, Y+ ;/\r
-\r
-0: _LPMI r24 ;Get a format char\r
- cpi r24, 0 ;End of format string?\r
- breq 90f ;/\r
- cpi r24, '%' ;Is format?\r
- breq 20f ;/\r
-1: rcall xputc ;Put a normal character\r
- rjmp 0b ;/\r
-90: ret\r
-\r
-20: ldi r18, 0 ;r18: digits\r
- clt ;T: filler\r
- _LPMI r21 ;Get flags\r
- cpi r21, '%' ;Is a %?\r
- breq 1b ;/\r
- cpi r21, '0' ;Zero filled?\r
- brne 23f ;\r
- set ;/\r
-22: _LPMI r21 ;Get width\r
-23: cpi r21, '9'+1 ;\r
- brcc 24f ;\r
- subi r21, '0' ;\r
- brcs 90b ;\r
- lsl r18 ;\r
- mov r0, r18 ;\r
- lsl r18 ;\r
- lsl r18 ;\r
- add r18, r0 ;\r
- add r18, r21 ;\r
- rjmp 22b ;/\r
-\r
-24: brtc 25f ;get value (low word)\r
- neg r18 ;\r
-25: ld r24, Y+ ;\r
- ld r25, Y+ ;/\r
- cpi r21, 'c' ;Is type character?\r
- breq 1b ;/\r
- cpi r21, 's' ;Is type RAM string?\r
- breq 50f ;/\r
- cpi r21, 'S' ;Is type ROM string?\r
- breq 60f ;/\r
- _MOVW r23,r22,r25,r24 ;r25:r22 = value\r
- clr r24 ;\r
- clr r25 ;\r
- clt ;/\r
- cpi r21, 'l' ;Is long int?\r
- brne 26f ;\r
- ld r24, Y+ ;get value (high word)\r
- ld r25, Y+ ;\r
- set ;\r
- _LPMI r21 ;/\r
-26: cpi r21, 'd' ;Is type signed decimal?\r
- brne 27f ;/\r
- ldi r20, -10 ;\r
- brts 40f ;\r
- sbrs r23, 7 ;\r
- rjmp 40f ;\r
- ldi r24, -1 ;\r
- ldi r25, -1 ;\r
- rjmp 40f ;/\r
-27: cpi r21, 'u' ;Is type unsigned decimal?\r
- ldi r20, 10 ;\r
- breq 40f ;/\r
- cpi r21, 'X' ;Is type hexdecimal?\r
- ldi r20, 16 ;\r
- breq 40f ;/\r
- cpi r21, 'b' ;Is type binary?\r
- ldi r20, 2 ;\r
- breq 40f ;/\r
- ret ;abort\r
-40: push ZH ;Output the value\r
- push ZL ;\r
- rcall xitoa ;\r
-42: pop ZL ;\r
- pop ZH ;\r
- rjmp 0b ;/\r
-\r
-50: push ZH ;Put a string on the RAM\r
- push ZL\r
- _MOVW ZH,ZL, r25,r24\r
-51: ld r24, Z+\r
- cpi r24, 0\r
- breq 42b\r
- rcall xputc\r
- rjmp 51b\r
-\r
-60: push ZH ;Put a string on the ROM\r
- push ZL\r
- rcall xputs\r
- rjmp 42b\r
-.endfunc\r
-\r
-\r
-.func __xprintf\r
-.global __xprintf\r
-__xprintf:\r
- push YH\r
- push YL\r
- in YL, _SFR_IO_ADDR(SPL)\r
-#ifdef SPH\r
- in YH, _SFR_IO_ADDR(SPH)\r
-#else\r
- clr YH\r
-#endif\r
- adiw YL, 5 ;Y = pointer to arguments\r
- rcall xvprintf\r
- pop YL\r
- pop YH\r
- ret\r
-.endfunc\r
-\r
-\r
-#if USE_XSPRINTF\r
-\r
-.func __xsprintf\r
-putram:\r
- _MOVW ZH,ZL, r15,r14\r
- st Z+, r24\r
- _MOVW r15,r14, ZH,ZL\r
- ret\r
-.global __xsprintf\r
-__xsprintf:\r
- push YH\r
- push YL\r
- in YL, _SFR_IO_ADDR(SPL)\r
-#ifdef SPH\r
- in YH, _SFR_IO_ADDR(SPH)\r
-#else\r
- clr YH\r
-#endif\r
- adiw YL, 5 ;Y = pointer to arguments\r
- lds ZL, xfunc_out+0 ;Save registered output function\r
- lds ZH, xfunc_out+1 ;\r
- push ZL ;\r
- push ZH ;/\r
- ldi ZL, lo8(pm(putram));Set local output function\r
- ldi ZH, hi8(pm(putram));\r
- sts xfunc_out+0, ZL ;\r
- sts xfunc_out+1, ZH ;/\r
- push r15 ;Initialize pointer to string buffer\r
- push r14 ;\r
- ld r14, Y+ ;\r
- ld r15, Y+ ;/\r
- rcall xvprintf\r
- _MOVW ZH,ZL, r15,r14 ;Terminate string\r
- st Z, r1 ;\r
- pop r14 ;\r
- pop r15 ;/\r
- pop ZH ;Restore registered output function\r
- pop ZL ;\r
- sts xfunc_out+0, ZL ;\r
- sts xfunc_out+1, ZH ;/\r
- pop YL\r
- pop YH\r
- ret\r
-.endfunc\r
-#endif\r
-\r
-\r
-#if USE_XFPRINTF\r
-.func __xfprintf\r
-.global __xfprintf\r
-__xfprintf:\r
- push YH\r
- push YL\r
- in YL, _SFR_IO_ADDR(SPL)\r
-#ifdef SPH\r
- in YH, _SFR_IO_ADDR(SPH)\r
-#else\r
- clr YH\r
-#endif\r
- adiw YL, 5 ;Y = pointer to arguments\r
- lds ZL, xfunc_out+0 ;Save registered output function\r
- lds ZH, xfunc_out+1 ;\r
- push ZL ;\r
- push ZH ;/\r
- ld ZL, Y+ ;Set output function\r
- ld ZH, Y+ ;\r
- sts xfunc_out+0, ZL ;\r
- sts xfunc_out+1, ZH ;/\r
- rcall xvprintf\r
- pop ZH ;Restore registered output function\r
- pop ZL ;\r
- sts xfunc_out+0, ZL ;\r
- sts xfunc_out+1, ZH ;/\r
- pop YL\r
- pop YH\r
- ret\r
-.endfunc\r
-#endif\r
-\r
-#endif\r
-\r
-\r
-\r
-;---------------------------------------------------------------------------\r
-; Extended numeral string input\r
-;\r
-;Prototype:\r
-; char xatoi ( /* 1: Successful, 0: Failed */\r
-; const char **str, /* pointer to pointer to source string */\r
-; long *res /* result */\r
-; );\r
-;\r
-\r
-\r
-#if USE_XATOI\r
-.func xatoi\r
-.global xatoi\r
-xatoi:\r
- _MOVW r1, r0, r23, r22\r
- _MOVW XH, XL, r25, r24\r
- ld ZL, X+\r
- ld ZH, X+\r
- clr r18 ;r21:r18 = 0;\r
- clr r19 ;\r
- clr r20 ;\r
- clr r21 ;/\r
- clt ;T = 0;\r
-\r
- ldi r25, 10 ;r25 = 10;\r
- rjmp 41f ;/\r
-40: adiw ZL, 1 ;Z++;\r
-41: ld r22, Z ;r22 = *Z;\r
- cpi r22, ' ' ;if(r22 == ' ') continue\r
- breq 40b ;/\r
- brcs 70f ;if(r22 < ' ') error;\r
- cpi r22, '-' ;if(r22 == '-') {\r
- brne 42f ; T = 1;\r
- set ; continue;\r
- rjmp 40b ;}\r
-42: cpi r22, '9'+1 ;if(r22 > '9') error;\r
- brcc 70f ;/\r
- cpi r22, '0' ;if(r22 < '0') error;\r
- brcs 70f ;/\r
- brne 51f ;if(r22 > '0') cv_start;\r
- ldi r25, 8 ;r25 = 8;\r
- adiw ZL, 1 ;r22 = *(++Z);\r
- ld r22, Z ;/\r
- cpi r22, ' '+1 ;if(r22 <= ' ') exit;\r
- brcs 80f ;/\r
- cpi r22, 'b' ;if(r22 == 'b') {\r
- brne 43f ; r25 = 2;\r
- ldi r25, 2 ; cv_start;\r
- rjmp 50f ;}\r
-43: cpi r22, 'x' ;if(r22 != 'x') error;\r
- brne 51f ;/\r
- ldi r25, 16 ;r25 = 16;\r
-\r
-50: adiw ZL, 1 ;Z++;\r
- ld r22, Z ;r22 = *Z;\r
-51: cpi r22, ' '+1 ;if(r22 <= ' ') break;\r
- brcs 80f ;/\r
- cpi r22, 'a' ;if(r22 >= 'a') r22 =- 0x20;\r
- brcs 52f ;\r
- subi r22, 0x20 ;/\r
-52: subi r22, '0' ;if((r22 -= '0') < 0) error;\r
- brcs 70f ;/\r
- cpi r22, 10 ;if(r22 >= 10) {\r
- brcs 53f ; r22 -= 7;\r
- subi r22, 7 ; if(r22 < 10) \r
- cpi r22, 10 ;\r
- brcs 70f ;}\r
-53: cp r22, r25 ;if(r22 >= r25) error;\r
- brcc 70f ;/\r
-60: ldi r24, 33 ;r21:r18 *= r25;\r
- sub r23, r23 ;\r
-61: brcc 62f ;\r
- add r23, r25 ;\r
-62: lsr r23 ;\r
- ror r21 ;\r
- ror r20 ;\r
- ror r19 ;\r
- ror r18 ;\r
- dec r24 ;\r
- brne 61b ;/\r
- add r18, r22 ;r21:r18 += r22;\r
- adc r19, r24 ;\r
- adc r20, r24 ;\r
- adc r21, r24 ;/\r
- rjmp 50b ;repeat\r
-\r
-70: ldi r24, 0\r
- rjmp 81f\r
-80: ldi r24, 1\r
-81: brtc 82f\r
- clr r22\r
- com r18\r
- com r19\r
- com r20\r
- com r21\r
- adc r18, r22\r
- adc r19, r22\r
- adc r20, r22\r
- adc r21, r22\r
-82: st -X, ZH\r
- st -X, ZL\r
- _MOVW XH, XL, r1, r0\r
- st X+, r18\r
- st X+, r19\r
- st X+, r20\r
- st X+, r21\r
- clr r1\r
- ret\r
-.endfunc\r
-#endif\r
-\r
-\r
+;---------------------------------------------------------------------------;
+; Extended itoa, puts, printf and atoi (C)ChaN, 2011
+;---------------------------------------------------------------------------;
+
+ // Base size is 152 bytes
+#define CR_CRLF 0 // Convert \n to \r\n (+10 bytes)
+#define USE_XPRINTF 1 // Enable xprintf function (+194 bytes)
+#define USE_XSPRINTF 0 // Add xsprintf function (+78 bytes)
+#define USE_XFPRINTF 0 // Add xfprintf function (+54 bytes)
+#define USE_XATOI 0 // Enable xatoi function (+182 bytes)
+
+
+#if FLASHEND > 0x1FFFF
+#error xitoa module does not support 256K devices
+#endif
+
+.nolist
+#include <avr/io.h> // Include device specific definitions.
+.list
+
+#ifdef SPM_PAGESIZE // Recent devices have "lpm Rd,Z+" and "movw".
+.macro _LPMI reg
+ lpm \reg, Z+
+.endm
+.macro _MOVW dh,dl, sh,sl
+ movw \dl, \sl
+.endm
+#else // Earlier devices do not have "lpm Rd,Z+" nor "movw".
+.macro _LPMI reg
+ lpm
+ mov \reg, r0
+ adiw ZL, 1
+.endm
+.macro _MOVW dh,dl, sh,sl
+ mov \dl, \sl
+ mov \dh, \sh
+.endm
+#endif
+
+
+
+;---------------------------------------------------------------------------
+; Stub function to forward to user output function
+;
+;Prototype: void xputc (char chr // a character to be output
+; );
+;Size: 12/12 words
+
+.section .bss
+.global xfunc_out ; xfunc_out must be initialized before using this module.
+xfunc_out: .ds.w 1
+.section .text
+
+
+.func xputc
+.global xputc
+xputc:
+#if CR_CRLF
+ cpi r24, 10 ;LF --> CRLF
+ brne 1f ;
+ ldi r24, 13 ;
+ rcall 1f ;
+ ldi r24, 10 ;/
+1:
+#endif
+ push ZH
+ push ZL
+ lds ZL, xfunc_out+0 ;Pointer to the registered output function.
+ lds ZH, xfunc_out+1 ;/
+ sbiw ZL, 0 ;Skip if null
+ breq 2f ;/
+ icall
+2: pop ZL
+ pop ZH
+ ret
+.endfunc
+
+
+
+;---------------------------------------------------------------------------
+; Direct ROM string output
+;
+;Prototype: void xputs (const char *str_p // rom string to be output
+; );
+
+.func xputs
+.global xputs
+xputs:
+ _MOVW ZH,ZL, r25,r24 ; Z = pointer to rom string
+1: _LPMI r24
+ cpi r24, 0
+ breq 2f
+ rcall xputc
+ rjmp 1b
+2: ret
+.endfunc
+
+
+;---------------------------------------------------------------------------
+; Extended direct numeral string output (32bit version)
+;
+;Prototype: void xitoa (long value, // value to be output
+; char radix, // radix
+; char width); // minimum width
+;
+
+.func xitoa
+.global xitoa
+xitoa:
+ ;r25:r22 = value, r20 = base, r18 = digits
+ clr r31 ;r31 = stack level
+ ldi r30, ' ' ;r30 = sign
+ ldi r19, ' ' ;r19 = filler
+ sbrs r20, 7 ;When base indicates signd format and the value
+ rjmp 0f ;is minus, add a '-'.
+ neg r20 ;
+ sbrs r25, 7 ;
+ rjmp 0f ;
+ ldi r30, '-' ;
+ com r22 ;
+ com r23 ;
+ com r24 ;
+ com r25 ;
+ adc r22, r1 ;
+ adc r23, r1 ;
+ adc r24, r1 ;
+ adc r25, r1 ;/
+0: sbrs r18, 7 ;When digits indicates zero filled,
+ rjmp 1f ;filler is '0'.
+ neg r18 ;
+ ldi r19, '0' ;/
+ ;----- string conversion loop
+1: ldi r21, 32 ;r26 = r25:r22 % r20
+ clr r26 ;r25:r22 /= r20
+2: lsl r22 ;
+ rol r23 ;
+ rol r24 ;
+ rol r25 ;
+ rol r26 ;
+ cp r26, r20 ;
+ brcs 3f ;
+ sub r26, r20 ;
+ inc r22 ;
+3: dec r21 ;
+ brne 2b ;/
+ cpi r26, 10 ;r26 is a numeral digit '0'-'F'
+ brcs 4f ;
+ subi r26, -7 ;
+4: subi r26, -'0' ;/
+ push r26 ;Stack it
+ inc r31 ;/
+ cp r22, r1 ;Repeat until r25:r22 gets zero
+ cpc r23, r1 ;
+ cpc r24, r1 ;
+ cpc r25, r1 ;
+ brne 1b ;/
+
+ cpi r30, '-' ;Minus sign if needed
+ brne 5f ;
+ push r30 ;
+ inc r31 ;/
+5: cp r31, r18 ;Filler
+ brcc 6f ;
+ push r19 ;
+ inc r31 ;
+ rjmp 5b ;/
+
+6: pop r24 ;Flush stacked digits and exit
+ rcall xputc ;
+ dec r31 ;
+ brne 6b ;/
+
+ ret
+.endfunc
+
+
+
+;---------------------------------------------------------------------------;
+; Formatted string output (16/32bit version)
+;
+;Prototype:
+; void __xprintf (const char *format_p, ...);
+; void __xsprintf(char*, const char *format_p, ...);
+; void __xfprintf(void(*func)(char), const char *format_p, ...);
+;
+
+#if USE_XPRINTF
+
+.func xvprintf
+xvprintf:
+ ld ZL, Y+ ;Z = pointer to format string
+ ld ZH, Y+ ;/
+
+0: _LPMI r24 ;Get a format char
+ cpi r24, 0 ;End of format string?
+ breq 90f ;/
+ cpi r24, '%' ;Is format?
+ breq 20f ;/
+1: rcall xputc ;Put a normal character
+ rjmp 0b ;/
+90: ret
+
+20: ldi r18, 0 ;r18: digits
+ clt ;T: filler
+ _LPMI r21 ;Get flags
+ cpi r21, '%' ;Is a %?
+ breq 1b ;/
+ cpi r21, '0' ;Zero filled?
+ brne 23f ;
+ set ;/
+22: _LPMI r21 ;Get width
+23: cpi r21, '9'+1 ;
+ brcc 24f ;
+ subi r21, '0' ;
+ brcs 90b ;
+ lsl r18 ;
+ mov r0, r18 ;
+ lsl r18 ;
+ lsl r18 ;
+ add r18, r0 ;
+ add r18, r21 ;
+ rjmp 22b ;/
+
+24: brtc 25f ;get value (low word)
+ neg r18 ;
+25: ld r24, Y+ ;
+ ld r25, Y+ ;/
+ cpi r21, 'c' ;Is type character?
+ breq 1b ;/
+ cpi r21, 's' ;Is type RAM string?
+ breq 50f ;/
+ cpi r21, 'S' ;Is type ROM string?
+ breq 60f ;/
+ _MOVW r23,r22,r25,r24 ;r25:r22 = value
+ clr r24 ;
+ clr r25 ;
+ clt ;/
+ cpi r21, 'l' ;Is long int?
+ brne 26f ;
+ ld r24, Y+ ;get value (high word)
+ ld r25, Y+ ;
+ set ;
+ _LPMI r21 ;/
+26: cpi r21, 'd' ;Is type signed decimal?
+ brne 27f ;/
+ ldi r20, -10 ;
+ brts 40f ;
+ sbrs r23, 7 ;
+ rjmp 40f ;
+ ldi r24, -1 ;
+ ldi r25, -1 ;
+ rjmp 40f ;/
+27: cpi r21, 'u' ;Is type unsigned decimal?
+ ldi r20, 10 ;
+ breq 40f ;/
+ cpi r21, 'X' ;Is type hexdecimal?
+ ldi r20, 16 ;
+ breq 40f ;/
+ cpi r21, 'b' ;Is type binary?
+ ldi r20, 2 ;
+ breq 40f ;/
+ ret ;abort
+40: push ZH ;Output the value
+ push ZL ;
+ rcall xitoa ;
+42: pop ZL ;
+ pop ZH ;
+ rjmp 0b ;/
+
+50: push ZH ;Put a string on the RAM
+ push ZL
+ _MOVW ZH,ZL, r25,r24
+51: ld r24, Z+
+ cpi r24, 0
+ breq 42b
+ rcall xputc
+ rjmp 51b
+
+60: push ZH ;Put a string on the ROM
+ push ZL
+ rcall xputs
+ rjmp 42b
+.endfunc
+
+
+.func __xprintf
+.global __xprintf
+__xprintf:
+ push YH
+ push YL
+ in YL, _SFR_IO_ADDR(SPL)
+#ifdef SPH
+ in YH, _SFR_IO_ADDR(SPH)
+#else
+ clr YH
+#endif
+ adiw YL, 5 ;Y = pointer to arguments
+ rcall xvprintf
+ pop YL
+ pop YH
+ ret
+.endfunc
+
+
+#if USE_XSPRINTF
+
+.func __xsprintf
+putram:
+ _MOVW ZH,ZL, r15,r14
+ st Z+, r24
+ _MOVW r15,r14, ZH,ZL
+ ret
+.global __xsprintf
+__xsprintf:
+ push YH
+ push YL
+ in YL, _SFR_IO_ADDR(SPL)
+#ifdef SPH
+ in YH, _SFR_IO_ADDR(SPH)
+#else
+ clr YH
+#endif
+ adiw YL, 5 ;Y = pointer to arguments
+ lds ZL, xfunc_out+0 ;Save registered output function
+ lds ZH, xfunc_out+1 ;
+ push ZL ;
+ push ZH ;/
+ ldi ZL, lo8(pm(putram));Set local output function
+ ldi ZH, hi8(pm(putram));
+ sts xfunc_out+0, ZL ;
+ sts xfunc_out+1, ZH ;/
+ push r15 ;Initialize pointer to string buffer
+ push r14 ;
+ ld r14, Y+ ;
+ ld r15, Y+ ;/
+ rcall xvprintf
+ _MOVW ZH,ZL, r15,r14 ;Terminate string
+ st Z, r1 ;
+ pop r14 ;
+ pop r15 ;/
+ pop ZH ;Restore registered output function
+ pop ZL ;
+ sts xfunc_out+0, ZL ;
+ sts xfunc_out+1, ZH ;/
+ pop YL
+ pop YH
+ ret
+.endfunc
+#endif
+
+
+#if USE_XFPRINTF
+.func __xfprintf
+.global __xfprintf
+__xfprintf:
+ push YH
+ push YL
+ in YL, _SFR_IO_ADDR(SPL)
+#ifdef SPH
+ in YH, _SFR_IO_ADDR(SPH)
+#else
+ clr YH
+#endif
+ adiw YL, 5 ;Y = pointer to arguments
+ lds ZL, xfunc_out+0 ;Save registered output function
+ lds ZH, xfunc_out+1 ;
+ push ZL ;
+ push ZH ;/
+ ld ZL, Y+ ;Set output function
+ ld ZH, Y+ ;
+ sts xfunc_out+0, ZL ;
+ sts xfunc_out+1, ZH ;/
+ rcall xvprintf
+ pop ZH ;Restore registered output function
+ pop ZL ;
+ sts xfunc_out+0, ZL ;
+ sts xfunc_out+1, ZH ;/
+ pop YL
+ pop YH
+ ret
+.endfunc
+#endif
+
+#endif
+
+
+
+;---------------------------------------------------------------------------
+; Extended numeral string input
+;
+;Prototype:
+; char xatoi ( /* 1: Successful, 0: Failed */
+; const char **str, /* pointer to pointer to source string */
+; long *res /* result */
+; );
+;
+
+
+#if USE_XATOI
+.func xatoi
+.global xatoi
+xatoi:
+ _MOVW r1, r0, r23, r22
+ _MOVW XH, XL, r25, r24
+ ld ZL, X+
+ ld ZH, X+
+ clr r18 ;r21:r18 = 0;
+ clr r19 ;
+ clr r20 ;
+ clr r21 ;/
+ clt ;T = 0;
+
+ ldi r25, 10 ;r25 = 10;
+ rjmp 41f ;/
+40: adiw ZL, 1 ;Z++;
+41: ld r22, Z ;r22 = *Z;
+ cpi r22, ' ' ;if(r22 == ' ') continue
+ breq 40b ;/
+ brcs 70f ;if(r22 < ' ') error;
+ cpi r22, '-' ;if(r22 == '-') {
+ brne 42f ; T = 1;
+ set ; continue;
+ rjmp 40b ;}
+42: cpi r22, '9'+1 ;if(r22 > '9') error;
+ brcc 70f ;/
+ cpi r22, '0' ;if(r22 < '0') error;
+ brcs 70f ;/
+ brne 51f ;if(r22 > '0') cv_start;
+ ldi r25, 8 ;r25 = 8;
+ adiw ZL, 1 ;r22 = *(++Z);
+ ld r22, Z ;/
+ cpi r22, ' '+1 ;if(r22 <= ' ') exit;
+ brcs 80f ;/
+ cpi r22, 'b' ;if(r22 == 'b') {
+ brne 43f ; r25 = 2;
+ ldi r25, 2 ; cv_start;
+ rjmp 50f ;}
+43: cpi r22, 'x' ;if(r22 != 'x') error;
+ brne 51f ;/
+ ldi r25, 16 ;r25 = 16;
+
+50: adiw ZL, 1 ;Z++;
+ ld r22, Z ;r22 = *Z;
+51: cpi r22, ' '+1 ;if(r22 <= ' ') break;
+ brcs 80f ;/
+ cpi r22, 'a' ;if(r22 >= 'a') r22 =- 0x20;
+ brcs 52f ;
+ subi r22, 0x20 ;/
+52: subi r22, '0' ;if((r22 -= '0') < 0) error;
+ brcs 70f ;/
+ cpi r22, 10 ;if(r22 >= 10) {
+ brcs 53f ; r22 -= 7;
+ subi r22, 7 ; if(r22 < 10)
+ cpi r22, 10 ;
+ brcs 70f ;}
+53: cp r22, r25 ;if(r22 >= r25) error;
+ brcc 70f ;/
+60: ldi r24, 33 ;r21:r18 *= r25;
+ sub r23, r23 ;
+61: brcc 62f ;
+ add r23, r25 ;
+62: lsr r23 ;
+ ror r21 ;
+ ror r20 ;
+ ror r19 ;
+ ror r18 ;
+ dec r24 ;
+ brne 61b ;/
+ add r18, r22 ;r21:r18 += r22;
+ adc r19, r24 ;
+ adc r20, r24 ;
+ adc r21, r24 ;/
+ rjmp 50b ;repeat
+
+70: ldi r24, 0
+ rjmp 81f
+80: ldi r24, 1
+81: brtc 82f
+ clr r22
+ com r18
+ com r19
+ com r20
+ com r21
+ adc r18, r22
+ adc r19, r22
+ adc r20, r22
+ adc r21, r22
+82: st -X, ZH
+ st -X, ZL
+ _MOVW XH, XL, r1, r0
+ st X+, r18
+ st X+, r19
+ st X+, r20
+ st X+, r21
+ clr r1
+ ret
+.endfunc
+#endif
+
+
-/*---------------------------------------------------------------------------\r
- Extended itoa, puts and printf (C)ChaN, 2011\r
------------------------------------------------------------------------------*/\r
-\r
-#ifndef XPRINTF_H\r
-#define XPRINTF_H\r
-\r
-#include <inttypes.h>\r
-#include <avr/pgmspace.h>\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-extern void (*xfunc_out)(uint8_t);\r
-#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)\r
-\r
-/* This is a pointer to user defined output function. It must be initialized\r
- before using this modle.\r
-*/\r
-\r
-void xputc(char chr);\r
-\r
-/* This is a stub function to forward outputs to user defined output function.\r
- All outputs from this module are output via this function.\r
-*/\r
-\r
-\r
-/*-----------------------------------------------------------------------------*/\r
-void xputs(const char *string_p);\r
-\r
-/* The string placed in the ROM is forwarded to xputc() directly.\r
-*/\r
-\r
-\r
-/*-----------------------------------------------------------------------------*/\r
-void xitoa(long value, char radix, char width);\r
-\r
-/* Extended itoa().\r
-\r
- value radix width output\r
- 100 10 6 " 100"\r
- 100 10 -6 "000100"\r
- 100 10 0 "100"\r
- 4294967295 10 0 "4294967295"\r
- 4294967295 -10 0 "-1"\r
- 655360 16 -8 "000A0000"\r
- 1024 16 0 "400"\r
- 0x55 2 -8 "01010101"\r
-*/\r
-\r
-\r
-/*-----------------------------------------------------------------------------*/\r
-#define xprintf(format, ...) __xprintf(PSTR(format), ##__VA_ARGS__)\r
-#define xsprintf(str, format, ...) __xsprintf(str, PSTR(format), ##__VA_ARGS__)\r
-#define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__)\r
-\r
-void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */\r
-void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */\r
-void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */\r
-\r
-/* Format string is placed in the ROM. The format flags is similar to printf().\r
-\r
- %[flag][width][size]type\r
-\r
- flag\r
- A '0' means filled with '0' when output is shorter than width.\r
- ' ' is used in default. This is effective only numeral type.\r
- width\r
- Minimum width in decimal number. This is effective only numeral type.\r
- Default width is zero.\r
- size\r
- A 'l' means the argument is long(32bit). Default is short(16bit).\r
- This is effective only numeral type.\r
- type\r
- 'c' : Character, argument is the value\r
- 's' : String placed on the RAM, argument is the pointer\r
- 'S' : String placed on the ROM, argument is the pointer\r
- 'd' : Signed decimal, argument is the value\r
- 'u' : Unsigned decimal, argument is the value\r
- 'X' : Hexdecimal, argument is the value\r
- 'b' : Binary, argument is the value\r
- '%' : '%'\r
-\r
-*/\r
-\r
-\r
-/*-----------------------------------------------------------------------------*/\r
-char xatoi(char **str, long *ret);\r
-\r
-/* Get value of the numeral string. \r
-\r
- str\r
- Pointer to pointer to source string\r
-\r
- "0b11001010" binary\r
- "0377" octal\r
- "0xff800" hexdecimal\r
- "1250000" decimal\r
- "-25000" decimal\r
-\r
- ret\r
- Pointer to return value\r
-*/\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif\r
-\r
+/*---------------------------------------------------------------------------
+ Extended itoa, puts and printf (C)ChaN, 2011
+-----------------------------------------------------------------------------*/
+
+#ifndef XPRINTF_H
+#define XPRINTF_H
+
+#include <inttypes.h>
+#include <avr/pgmspace.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void (*xfunc_out)(uint8_t);
+#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)
+
+/* This is a pointer to user defined output function. It must be initialized
+ before using this modle.
+*/
+
+void xputc(char chr);
+
+/* This is a stub function to forward outputs to user defined output function.
+ All outputs from this module are output via this function.
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+void xputs(const char *string_p);
+
+/* The string placed in the ROM is forwarded to xputc() directly.
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+void xitoa(long value, char radix, char width);
+
+/* Extended itoa().
+
+ value radix width output
+ 100 10 6 " 100"
+ 100 10 -6 "000100"
+ 100 10 0 "100"
+ 4294967295 10 0 "4294967295"
+ 4294967295 -10 0 "-1"
+ 655360 16 -8 "000A0000"
+ 1024 16 0 "400"
+ 0x55 2 -8 "01010101"
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+#define xprintf(format, ...) __xprintf(PSTR(format), ##__VA_ARGS__)
+#define xsprintf(str, format, ...) __xsprintf(str, PSTR(format), ##__VA_ARGS__)
+#define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__)
+
+void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */
+void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */
+void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
+
+/* Format string is placed in the ROM. The format flags is similar to printf().
+
+ %[flag][width][size]type
+
+ flag
+ A '0' means filled with '0' when output is shorter than width.
+ ' ' is used in default. This is effective only numeral type.
+ width
+ Minimum width in decimal number. This is effective only numeral type.
+ Default width is zero.
+ size
+ A 'l' means the argument is long(32bit). Default is short(16bit).
+ This is effective only numeral type.
+ type
+ 'c' : Character, argument is the value
+ 's' : String placed on the RAM, argument is the pointer
+ 'S' : String placed on the ROM, argument is the pointer
+ 'd' : Signed decimal, argument is the value
+ 'u' : Unsigned decimal, argument is the value
+ 'X' : Hexdecimal, argument is the value
+ 'b' : Binary, argument is the value
+ '%' : '%'
+
+*/
+
+
+/*-----------------------------------------------------------------------------*/
+char xatoi(char **str, long *ret);
+
+/* Get value of the numeral string.
+
+ str
+ Pointer to pointer to source string
+
+ "0b11001010" binary
+ "0377" octal
+ "0xff800" hexdecimal
+ "1250000" decimal
+ "-25000" decimal
+
+ ret
+ Pointer to return value
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
-;---------------------------------------------------------------------------;\r
-; Software implemented UART module ;\r
-; (C)ChaN, 2005 (http://elm-chan.org/) ;\r
-;---------------------------------------------------------------------------;\r
-; Bit rate settings:\r
-;\r
-; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz\r
-; 2.4kbps 138 - - - - - - - -\r
-; 4.8kbps 68 138 - - - - - - -\r
-; 9.6kbps 33 68 138 208 - - - - -\r
-; 19.2kbps - 33 68 102 138 173 208 - -\r
-; 38.4kbps - - 33 50 68 85 102 138 172\r
-; 57.6kbps - - 21 33 44 56 68 91 114\r
-; 115.2kbps - - - - 21 27 33 44 56\r
-\r
-.nolist\r
-#include <avr/io.h>\r
-.list\r
-\r
-#define BPS 102 /* Bit delay. (see above table) */\r
-#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */\r
-\r
-#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */\r
-#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */\r
-#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */\r
-#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */\r
-\r
-\r
-\r
-#ifdef SPM_PAGESIZE\r
-.macro _LPMI reg\r
- lpm \reg, Z+\r
-.endm\r
-.macro _MOVW dh,dl, sh,sl\r
- movw \dl, \sl\r
-.endm\r
-#else\r
-.macro _LPMI reg\r
- lpm\r
- mov \reg, r0\r
- adiw ZL, 1\r
-.endm\r
-.macro _MOVW dh,dl, sh,sl\r
- mov \dl, \sl\r
- mov \dh, \sh\r
-.endm\r
-#endif\r
-\r
-\r
-\r
-;---------------------------------------------------------------------------;\r
-; Transmit a byte in serial format of N81\r
-;\r
-;Prototype: void xmit (uint8_t data);\r
-;Size: 16 words\r
-\r
-.global xmit\r
-.func xmit\r
-xmit:\r
-#if BIDIR\r
- ldi r23, BPS-1 ;Pre-idle time for bidirectional data line\r
-5: dec r23 ;\r
- brne 5b ;/\r
-#endif\r
- in r0, _SFR_IO_ADDR(SREG) ;Save flags\r
-\r
- com r24 ;C = start bit\r
- ldi r25, 10 ;Bit counter\r
- cli ;Start critical section\r
-\r
-1: ldi r23, BPS-1 ;----- Bit transferring loop \r
-2: dec r23 ;Wait for a bit time\r
- brne 2b ;/\r
- brcs 3f ;MISO = bit to be sent\r
- OUT_1 ;\r
-3: brcc 4f ;\r
- OUT_0 ;/\r
-4: lsr r24 ;Get next bit into C\r
- dec r25 ;All bits sent?\r
- brne 1b ; no, coutinue\r
-\r
- out _SFR_IO_ADDR(SREG), r0 ;End of critical section\r
- ret\r
-.endfunc\r
-\r
-\r
-\r
-;---------------------------------------------------------------------------;\r
-; Receive a byte\r
-;\r
-;Prototype: uint8_t rcvr (void);\r
-;Size: 19 words\r
-\r
-.global rcvr\r
-.func rcvr\r
-rcvr:\r
- in r0, _SFR_IO_ADDR(SREG) ;Save flags\r
-\r
- ldi r24, 0x80 ;Receiving shift reg\r
- cli ;Start critical section\r
-\r
-1: SKIP_IN_1 ;Wait for idle\r
- rjmp 1b\r
-2: SKIP_IN_0 ;Wait for start bit\r
- rjmp 2b\r
- ldi r25, BPS/2 ;Wait for half bit time\r
-3: dec r25\r
- brne 3b\r
-\r
-4: ldi r25, BPS ;----- Bit receiving loop\r
-5: dec r25 ;Wait for a bit time\r
- brne 5b ;/\r
- lsr r24 ;Next bit\r
- SKIP_IN_0 ;Get a data bit into r24.7\r
- ori r24, 0x80\r
- brcc 4b ;All bits received? no, continue\r
-\r
- out _SFR_IO_ADDR(SREG), r0 ;End of critical section\r
- ret\r
-.endfunc\r
-\r
-\r
-; Not wait for start bit. This should be called after detecting start bit.\r
-.global recv\r
-.func recv\r
-recv:\r
- in r0, _SFR_IO_ADDR(SREG) ;Save flags\r
-\r
- ldi r24, 0x80 ;Receiving shift reg\r
- cli ;Start critical section\r
-\r
-;1: SKIP_IN_1 ;Wait for idle\r
-; rjmp 1b\r
-;2: SKIP_IN_0 ;Wait for start bit\r
-; rjmp 2b\r
- ldi r25, BPS/2 ;Wait for half bit time\r
-3: dec r25\r
- brne 3b\r
-\r
-4: ldi r25, BPS ;----- Bit receiving loop\r
-5: dec r25 ;Wait for a bit time\r
- brne 5b ;/\r
- lsr r24 ;Next bit\r
- SKIP_IN_0 ;Get a data bit into r24.7\r
- ori r24, 0x80\r
- brcc 4b ;All bits received? no, continue\r
-\r
- ldi r25, BPS/2 ;Wait for half bit time\r
-6: dec r25\r
- brne 6b\r
-7: SKIP_IN_1 ;Wait for stop bit\r
- rjmp 7b\r
-\r
- out _SFR_IO_ADDR(SREG), r0 ;End of critical section\r
- ret\r
-.endfunc\r
+;---------------------------------------------------------------------------;
+; Software implemented UART module ;
+; (C)ChaN, 2005 (http://elm-chan.org/) ;
+;---------------------------------------------------------------------------;
+; Bit rate settings:
+;
+; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz
+; 2.4kbps 138 - - - - - - - -
+; 4.8kbps 68 138 - - - - - - -
+; 9.6kbps 33 68 138 208 - - - - -
+; 19.2kbps - 33 68 102 138 173 208 - -
+; 38.4kbps - - 33 50 68 85 102 138 172
+; 57.6kbps - - 21 33 44 56 68 91 114
+; 115.2kbps - - - - 21 27 33 44 56
+
+.nolist
+#include <avr/io.h>
+.list
+
+#define BPS 102 /* Bit delay. (see above table) */
+#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
+
+#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */
+#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */
+#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */
+#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */
+
+
+
+#ifdef SPM_PAGESIZE
+.macro _LPMI reg
+ lpm \reg, Z+
+.endm
+.macro _MOVW dh,dl, sh,sl
+ movw \dl, \sl
+.endm
+#else
+.macro _LPMI reg
+ lpm
+ mov \reg, r0
+ adiw ZL, 1
+.endm
+.macro _MOVW dh,dl, sh,sl
+ mov \dl, \sl
+ mov \dh, \sh
+.endm
+#endif
+
+
+
+;---------------------------------------------------------------------------;
+; Transmit a byte in serial format of N81
+;
+;Prototype: void xmit (uint8_t data);
+;Size: 16 words
+
+.global xmit
+.func xmit
+xmit:
+#if BIDIR
+ ldi r23, BPS-1 ;Pre-idle time for bidirectional data line
+5: dec r23 ;
+ brne 5b ;/
+#endif
+ in r0, _SFR_IO_ADDR(SREG) ;Save flags
+
+ com r24 ;C = start bit
+ ldi r25, 10 ;Bit counter
+ cli ;Start critical section
+
+1: ldi r23, BPS-1 ;----- Bit transferring loop
+2: dec r23 ;Wait for a bit time
+ brne 2b ;/
+ brcs 3f ;MISO = bit to be sent
+ OUT_1 ;
+3: brcc 4f ;
+ OUT_0 ;/
+4: lsr r24 ;Get next bit into C
+ dec r25 ;All bits sent?
+ brne 1b ; no, coutinue
+
+ out _SFR_IO_ADDR(SREG), r0 ;End of critical section
+ ret
+.endfunc
+
+
+
+;---------------------------------------------------------------------------;
+; Receive a byte
+;
+;Prototype: uint8_t rcvr (void);
+;Size: 19 words
+
+.global rcvr
+.func rcvr
+rcvr:
+ in r0, _SFR_IO_ADDR(SREG) ;Save flags
+
+ ldi r24, 0x80 ;Receiving shift reg
+ cli ;Start critical section
+
+1: SKIP_IN_1 ;Wait for idle
+ rjmp 1b
+2: SKIP_IN_0 ;Wait for start bit
+ rjmp 2b
+ ldi r25, BPS/2 ;Wait for half bit time
+3: dec r25
+ brne 3b
+
+4: ldi r25, BPS ;----- Bit receiving loop
+5: dec r25 ;Wait for a bit time
+ brne 5b ;/
+ lsr r24 ;Next bit
+ SKIP_IN_0 ;Get a data bit into r24.7
+ ori r24, 0x80
+ brcc 4b ;All bits received? no, continue
+
+ out _SFR_IO_ADDR(SREG), r0 ;End of critical section
+ ret
+.endfunc
+
+
+; Not wait for start bit. This should be called after detecting start bit.
+.global recv
+.func recv
+recv:
+ in r0, _SFR_IO_ADDR(SREG) ;Save flags
+
+ ldi r24, 0x80 ;Receiving shift reg
+ cli ;Start critical section
+
+;1: SKIP_IN_1 ;Wait for idle
+; rjmp 1b
+;2: SKIP_IN_0 ;Wait for start bit
+; rjmp 2b
+ ldi r25, BPS/2 ;Wait for half bit time
+3: dec r25
+ brne 3b
+
+4: ldi r25, BPS ;----- Bit receiving loop
+5: dec r25 ;Wait for a bit time
+ brne 5b ;/
+ lsr r24 ;Next bit
+ SKIP_IN_0 ;Get a data bit into r24.7
+ ori r24, 0x80
+ brcc 4b ;All bits received? no, continue
+
+ ldi r25, BPS/2 ;Wait for half bit time
+6: dec r25
+ brne 6b
+7: SKIP_IN_1 ;Wait for stop bit
+ rjmp 7b
+
+ out _SFR_IO_ADDR(SREG), r0 ;End of critical section
+ ret
+.endfunc
-#ifndef SUART\r
-#define SUART\r
-\r
-void xmit(uint8_t);\r
-uint8_t rcvr(void);\r
-uint8_t recv(void);\r
-\r
-#endif /* SUART */\r
+#ifndef SUART
+#define SUART
+
+void xmit(uint8_t);
+uint8_t rcvr(void);
+uint8_t recv(void);
+
+#endif /* SUART */
-/* This is from http://www.mtcnet.net/~henryvm/wdt/ */\r
-#ifndef _AVR_WD_H_\r
-#define _AVR_WD_H_\r
-\r
-#include <avr/io.h>\r
-\r
-/*\r
-Copyright (c) 2009, Curt Van Maanen\r
-\r
-Permission to use, copy, modify, and/or distribute this software for any\r
-purpose with or without fee is hereby granted, provided that the above\r
-copyright notice and this permission notice appear in all copies.\r
-\r
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES\r
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF\r
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR\r
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES\r
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN\r
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF\r
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.\r
-\r
-\r
-include usage-\r
- #include "wd.h" //if in same directory as project\r
- #include <avr/wd.h> //if wd.h is in avr directory\r
-\r
-set watchdog modes and prescale\r
-\r
-usage-\r
- WD_SET(mode,[timeout]); //prescale always set\r
-\r
-modes-\r
- WD_OFF disabled\r
- WD_RST normal reset mode\r
- WD_IRQ interrupt only mode (if supported)\r
- WD_RST_IRQ interrupt+reset mode (if supported)\r
-\r
-timeout-\r
- WDTO_15MS default if no timeout provided\r
- WDTO_30MS\r
- WDTO_60MS\r
- WDTO_120MS\r
- WDTO_250MS\r
- WDTO_500MS\r
- WDTO_1S\r
- WDTO_2S\r
- WDTO_4S (if supported)\r
- WDTO_8S (if supported)\r
-\r
-examples-\r
- WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout\r
- WD_SET(WD_OFF); //watchdog disabled (if not fused on)\r
- WD_SET(WD_RST); //reset mode, 15ms (default timeout)\r
- WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout\r
- WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout\r
-\r
-\r
-for enhanced watchdogs, if the watchdog is not being used WDRF should be\r
-cleared on every power up or reset, along with disabling the watchdog-\r
- WD_DISABLE(); //clear WDRF, then turn off watchdog\r
-\r
-*/\r
-\r
-//reset registers to the same name (MCUCSR)\r
-#if !defined(MCUCSR)\r
-#define MCUCSR MCUSR\r
-#endif\r
-\r
-//watchdog registers to the same name (WDTCSR)\r
-#if !defined(WDTCSR)\r
-#define WDTCSR WDTCR\r
-#endif\r
-\r
-//if enhanced watchdog, define irq values, create disable macro\r
-#if defined(WDIF)\r
-#define WD_IRQ 0xC0\r
-#define WD_RST_IRQ 0xC8\r
-#define WD_DISABLE() do{ \\r
- MCUCSR &= ~(1<<WDRF); \\r
- WD_SET(WD_OFF); \\r
- }while(0)\r
-#endif\r
-\r
-//all watchdogs\r
-#define WD_RST 8\r
-#define WD_OFF 0\r
-\r
-//prescale values\r
-#define WDTO_15MS 0\r
-#define WDTO_30MS 1\r
-#define WDTO_60MS 2\r
-#define WDTO_120MS 3\r
-#define WDTO_250MS 4\r
-#define WDTO_500MS 5\r
-#define WDTO_1S 6\r
-#define WDTO_2S 7\r
-\r
-//prescale values for avrs with WDP3\r
-#if defined(WDP3)\r
-#define WDTO_4S 0x20\r
-#define WDTO_8S 0x21\r
-#endif\r
-\r
-//watchdog reset\r
-#define WDR() __asm__ __volatile__("wdr")\r
-\r
-//avr reset using watchdog\r
-#define WD_AVR_RESET() do{ \\r
- __asm__ __volatile__("cli"); \\r
- WD_SET_UNSAFE(WD_RST); \\r
- while(1); \\r
- }while(0)\r
-\r
-/*set the watchdog-\r
-1. save SREG\r
-2. turn off irq's\r
-3. reset watchdog timer\r
-4. enable watchdog change\r
-5. write watchdog value\r
-6. restore SREG (restoring irq status)\r
-*/\r
-#define WD_SET(val,...) \\r
- __asm__ __volatile__( \\r
- "in __tmp_reg__,__SREG__" "\n\t" \\r
- "cli" "\n\t" \\r
- "wdr" "\n\t" \\r
- "sts %[wdreg],%[wden]" "\n\t" \\r
- "sts %[wdreg],%[wdval]" "\n\t" \\r
- "out __SREG__,__tmp_reg__" "\n\t" \\r
- : \\r
- : [wdreg] "M" (&WDTCSR), \\r
- [wden] "r" ((uint8_t)(0x18)), \\r
- [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \\r
- : "r0" \\r
-)\r
-\r
-/*set the watchdog when I bit in SREG known to be clear-\r
-1. reset watchdog timer\r
-2. enable watchdog change\r
-5. write watchdog value\r
-*/\r
-#define WD_SET_UNSAFE(val,...) \\r
- __asm__ __volatile__( \\r
- "wdr" "\n\t" \\r
- "sts %[wdreg],%[wden]" "\n\t" \\r
- "sts %[wdreg],%[wdval]" "\n\t" \\r
- : \\r
- : [wdreg] "M" (&WDTCSR), \\r
- [wden] "r" ((uint8_t)(0x18)), \\r
- [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \\r
-)\r
-\r
-\r
-//for compatibility with avr/wdt.h\r
-#define wdt_enable(val) WD_SET(WD_RST,val)\r
-#define wdt_disable() WD_SET(WD_OFF)\r
-\r
-\r
-#endif /* _AVR_WD_H_ */\r
+/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
+#ifndef _AVR_WD_H_
+#define _AVR_WD_H_
+
+#include <avr/io.h>
+
+/*
+Copyright (c) 2009, Curt Van Maanen
+
+Permission to use, copy, modify, and/or distribute this software for any
+purpose with or without fee is hereby granted, provided that the above
+copyright notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
+include usage-
+ #include "wd.h" //if in same directory as project
+ #include <avr/wd.h> //if wd.h is in avr directory
+
+set watchdog modes and prescale
+
+usage-
+ WD_SET(mode,[timeout]); //prescale always set
+
+modes-
+ WD_OFF disabled
+ WD_RST normal reset mode
+ WD_IRQ interrupt only mode (if supported)
+ WD_RST_IRQ interrupt+reset mode (if supported)
+
+timeout-
+ WDTO_15MS default if no timeout provided
+ WDTO_30MS
+ WDTO_60MS
+ WDTO_120MS
+ WDTO_250MS
+ WDTO_500MS
+ WDTO_1S
+ WDTO_2S
+ WDTO_4S (if supported)
+ WDTO_8S (if supported)
+
+examples-
+ WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout
+ WD_SET(WD_OFF); //watchdog disabled (if not fused on)
+ WD_SET(WD_RST); //reset mode, 15ms (default timeout)
+ WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout
+ WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
+
+
+for enhanced watchdogs, if the watchdog is not being used WDRF should be
+cleared on every power up or reset, along with disabling the watchdog-
+ WD_DISABLE(); //clear WDRF, then turn off watchdog
+
+*/
+
+//reset registers to the same name (MCUCSR)
+#if !defined(MCUCSR)
+#define MCUCSR MCUSR
+#endif
+
+//watchdog registers to the same name (WDTCSR)
+#if !defined(WDTCSR)
+#define WDTCSR WDTCR
+#endif
+
+//if enhanced watchdog, define irq values, create disable macro
+#if defined(WDIF)
+#define WD_IRQ 0xC0
+#define WD_RST_IRQ 0xC8
+#define WD_DISABLE() do{ \
+ MCUCSR &= ~(1<<WDRF); \
+ WD_SET(WD_OFF); \
+ }while(0)
+#endif
+
+//all watchdogs
+#define WD_RST 8
+#define WD_OFF 0
+
+//prescale values
+#define WDTO_15MS 0
+#define WDTO_30MS 1
+#define WDTO_60MS 2
+#define WDTO_120MS 3
+#define WDTO_250MS 4
+#define WDTO_500MS 5
+#define WDTO_1S 6
+#define WDTO_2S 7
+
+//prescale values for avrs with WDP3
+#if defined(WDP3)
+#define WDTO_4S 0x20
+#define WDTO_8S 0x21
+#endif
+
+//watchdog reset
+#define WDR() __asm__ __volatile__("wdr")
+
+//avr reset using watchdog
+#define WD_AVR_RESET() do{ \
+ __asm__ __volatile__("cli"); \
+ WD_SET_UNSAFE(WD_RST); \
+ while(1); \
+ }while(0)
+
+/*set the watchdog-
+1. save SREG
+2. turn off irq's
+3. reset watchdog timer
+4. enable watchdog change
+5. write watchdog value
+6. restore SREG (restoring irq status)
+*/
+#define WD_SET(val,...) \
+ __asm__ __volatile__( \
+ "in __tmp_reg__,__SREG__" "\n\t" \
+ "cli" "\n\t" \
+ "wdr" "\n\t" \
+ "sts %[wdreg],%[wden]" "\n\t" \
+ "sts %[wdreg],%[wdval]" "\n\t" \
+ "out __SREG__,__tmp_reg__" "\n\t" \
+ : \
+ : [wdreg] "M" (&WDTCSR), \
+ [wden] "r" ((uint8_t)(0x18)), \
+ [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
+ : "r0" \
+)
+
+/*set the watchdog when I bit in SREG known to be clear-
+1. reset watchdog timer
+2. enable watchdog change
+5. write watchdog value
+*/
+#define WD_SET_UNSAFE(val,...) \
+ __asm__ __volatile__( \
+ "wdr" "\n\t" \
+ "sts %[wdreg],%[wden]" "\n\t" \
+ "sts %[wdreg],%[wdval]" "\n\t" \
+ : \
+ : [wdreg] "M" (&WDTCSR), \
+ [wden] "r" ((uint8_t)(0x18)), \
+ [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
+)
+
+
+//for compatibility with avr/wdt.h
+#define wdt_enable(val) WD_SET(WD_RST,val)
+#define wdt_disable() WD_SET(WD_OFF)
+
+
+#endif /* _AVR_WD_H_ */
-<asf xmlversion="1.0">\r
- <project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">\r
- <require idref="lufa.bootloaders.cdc"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">\r
- <require idref="lufa.bootloaders.cdc"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb647"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">\r
- <require idref="lufa.bootloaders.cdc"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega32u4"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">\r
- <require idref="lufa.bootloaders.cdc"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega16u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">\r
- <require idref="lufa.bootloaders.cdc"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega8u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">\r
- <info type="description" value="summary">\r
- CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="Bootloaders"/>\r
- <keyword value="USB Device"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="include-path" value="."/>\r
- <build type="c-source" value="BootloaderCDC.c"/>\r
- <build type="header-file" value="BootloaderCDC.h"/>\r
- <build type="c-source" value="Descriptors.c"/>\r
- <build type="header-file" value="Descriptors.h"/>\r
- <build type="c-source" value="BootloaderAPI.c"/>\r
- <build type="header-file" value="BootloaderAPI.h"/>\r
- <build type="asm-source" value="BootloaderAPITable.S"/>\r
-\r
- <build type="module-config" subtype="path" value="Config"/>\r
- <build type="header-file" value="Config/LUFAConfig.h"/>\r
- <build type="header-file" value="Config/AppConfig.h"/>\r
-\r
- <build type="distribute" subtype="user-file" value="doxyfile"/>\r
- <build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>\r
- <build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- <require idref="lufa.drivers.board.leds"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
+ <require idref="lufa.bootloaders.cdc"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
+ <info type="description" value="summary">
+ CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderCDC.c"/>
+ <build type="header-file" value="BootloaderCDC.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
+ <build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
-<asf xmlversion="1.0">\r
- <project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">\r
- <require idref="lufa.bootloaders.dfu"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">\r
- <require idref="lufa.bootloaders.dfu"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb647"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">\r
- <require idref="lufa.bootloaders.dfu"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega32u4"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">\r
- <require idref="lufa.bootloaders.dfu"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega16u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">\r
- <require idref="lufa.bootloaders.dfu"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega8u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">\r
- <info type="description" value="summary">\r
- DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="Bootloaders"/>\r
- <keyword value="USB Device"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="include-path" value="."/>\r
- <build type="c-source" value="BootloaderDFU.c"/>\r
- <build type="header-file" value="BootloaderDFU.h"/>\r
- <build type="c-source" value="Descriptors.c"/>\r
- <build type="header-file" value="Descriptors.h"/>\r
- <build type="c-source" value="BootloaderAPI.c"/>\r
- <build type="header-file" value="BootloaderAPI.h"/>\r
- <build type="asm-source" value="BootloaderAPITable.S"/>\r
-\r
- <build type="module-config" subtype="path" value="Config"/>\r
- <build type="header-file" value="Config/LUFAConfig.h"/>\r
- <build type="header-file" value="Config/AppConfig.h"/>\r
-\r
- <build type="distribute" subtype="user-file" value="doxyfile"/>\r
- <build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- <require idref="lufa.drivers.board.leds"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
+ <require idref="lufa.bootloaders.dfu"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
+ <info type="description" value="summary">
+ DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderDFU.c"/>
+ <build type="header-file" value="BootloaderDFU.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
-<asf xmlversion="1.0">\r
- <project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">\r
- <require idref="lufa.bootloaders.hid"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>\r
- </project>\r
-\r
- <project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">\r
- <require idref="lufa.bootloaders.hid"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb647"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>\r
- </project>\r
-\r
- <project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">\r
- <require idref="lufa.bootloaders.hid"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega32u4"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>\r
- </project>\r
-\r
- <project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">\r
- <require idref="lufa.bootloaders.hid"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega16u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x3800"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>\r
- </project>\r
-\r
- <project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">\r
- <require idref="lufa.bootloaders.hid"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega8u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1800"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">\r
- <info type="description" value="summary">\r
- HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="Bootloaders"/>\r
- <keyword value="USB Device"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="include-path" value="."/>\r
- <build type="c-source" value="BootloaderHID.c"/>\r
- <build type="header-file" value="BootloaderHID.h"/>\r
- <build type="c-source" value="Descriptors.c"/>\r
- <build type="header-file" value="Descriptors.h"/>\r
-\r
- <build type="module-config" subtype="path" value="Config"/>\r
- <build type="header-file" value="Config/LUFAConfig.h"/>\r
-\r
- <build type="distribute" subtype="user-file" value="doxyfile"/>\r
- <build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>\r
- <build type="distribute" subtype="directory" value="HostLoaderApp"/>\r
- <build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- <require idref="lufa.drivers.board.leds"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+ </project>
+
+ <project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+ </project>
+
+ <project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+ </project>
+
+ <project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3800"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
+ </project>
+
+ <project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
+ <require idref="lufa.bootloaders.hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1800"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
+ <info type="description" value="summary">
+ HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderHID.c"/>
+ <build type="header-file" value="BootloaderHID.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
+ <build type="distribute" subtype="directory" value="HostLoaderApp"/>
+ <build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2014.\r
-\r
- dean [at] fourwalledcubicle [dot] com\r
- www.lufa-lib.org\r
-*/\r
-\r
-/*\r
- Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this\r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in\r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaims all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-#if AUX_BOOT_SECTION_SIZE > 0\r
-#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).\r
-\r
-; Trampoline to jump over the AUX bootloader section to the start of the bootloader,\r
-; on devices where an AUX bootloader section is used.\r
-.section .boot_aux_trampoline, "ax"\r
-.global Boot_AUX_Trampoline\r
-Boot_AUX_Trampoline:\r
- jmp BOOT_START_ADDR\r
-#endif\r
-\r
-; Trampolines to actual API implementations if the target address is outside the\r
-; range of a rjmp instruction (can happen with large bootloader sections)\r
-.section .apitable_trampolines, "ax"\r
-.global BootloaderAPI_Trampolines\r
-BootloaderAPI_Trampolines:\r
-\r
- BootloaderAPI_ErasePage_Trampoline:\r
- jmp BootloaderAPI_ErasePage\r
- BootloaderAPI_WritePage_Trampoline:\r
- jmp BootloaderAPI_WritePage\r
- BootloaderAPI_FillWord_Trampoline:\r
- jmp BootloaderAPI_FillWord\r
- BootloaderAPI_ReadSignature_Trampoline:\r
- jmp BootloaderAPI_ReadSignature\r
- BootloaderAPI_ReadFuse_Trampoline:\r
- jmp BootloaderAPI_ReadFuse\r
- BootloaderAPI_ReadLock_Trampoline:\r
- jmp BootloaderAPI_ReadLock\r
- BootloaderAPI_WriteLock_Trampoline:\r
- jmp BootloaderAPI_WriteLock\r
- BootloaderAPI_UNUSED1:\r
- ret\r
- BootloaderAPI_UNUSED2:\r
- ret\r
- BootloaderAPI_UNUSED3:\r
- ret\r
- BootloaderAPI_UNUSED4:\r
- ret\r
- BootloaderAPI_UNUSED5:\r
- ret\r
-\r
-\r
-\r
-; API function jump table\r
-.section .apitable_jumptable, "ax"\r
-.global BootloaderAPI_JumpTable\r
-BootloaderAPI_JumpTable:\r
-\r
- rjmp BootloaderAPI_ErasePage_Trampoline\r
- rjmp BootloaderAPI_WritePage_Trampoline\r
- rjmp BootloaderAPI_FillWord_Trampoline\r
- rjmp BootloaderAPI_ReadSignature_Trampoline\r
- rjmp BootloaderAPI_ReadFuse_Trampoline\r
- rjmp BootloaderAPI_ReadLock_Trampoline\r
- rjmp BootloaderAPI_WriteLock_Trampoline\r
- rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1\r
- rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2\r
- rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3\r
- rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4\r
- rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5\r
-\r
-\r
-\r
-; Bootloader table signatures and information\r
-.section .apitable_signatures, "ax"\r
-.global BootloaderAPI_Signatures\r
-BootloaderAPI_Signatures:\r
-\r
- .long BOOT_START_ADDR ; Start address of the bootloader\r
- .word 0xDF30 ; Signature for the MS class bootloader, V1\r
- .word 0xDCFB ; Signature for a LUFA class bootloader\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2014.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#if AUX_BOOT_SECTION_SIZE > 0
+#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
+
+; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
+; on devices where an AUX bootloader section is used.
+.section .boot_aux_trampoline, "ax"
+.global Boot_AUX_Trampoline
+Boot_AUX_Trampoline:
+ jmp BOOT_START_ADDR
+#endif
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+ BootloaderAPI_ErasePage_Trampoline:
+ jmp BootloaderAPI_ErasePage
+ BootloaderAPI_WritePage_Trampoline:
+ jmp BootloaderAPI_WritePage
+ BootloaderAPI_FillWord_Trampoline:
+ jmp BootloaderAPI_FillWord
+ BootloaderAPI_ReadSignature_Trampoline:
+ jmp BootloaderAPI_ReadSignature
+ BootloaderAPI_ReadFuse_Trampoline:
+ jmp BootloaderAPI_ReadFuse
+ BootloaderAPI_ReadLock_Trampoline:
+ jmp BootloaderAPI_ReadLock
+ BootloaderAPI_WriteLock_Trampoline:
+ jmp BootloaderAPI_WriteLock
+ BootloaderAPI_UNUSED1:
+ ret
+ BootloaderAPI_UNUSED2:
+ ret
+ BootloaderAPI_UNUSED3:
+ ret
+ BootloaderAPI_UNUSED4:
+ ret
+ BootloaderAPI_UNUSED5:
+ ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+ rjmp BootloaderAPI_ErasePage_Trampoline
+ rjmp BootloaderAPI_WritePage_Trampoline
+ rjmp BootloaderAPI_FillWord_Trampoline
+ rjmp BootloaderAPI_ReadSignature_Trampoline
+ rjmp BootloaderAPI_ReadFuse_Trampoline
+ rjmp BootloaderAPI_ReadLock_Trampoline
+ rjmp BootloaderAPI_WriteLock_Trampoline
+ rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+ rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+ rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+ rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+ rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+ .long BOOT_START_ADDR ; Start address of the bootloader
+ .word 0xDF30 ; Signature for the MS class bootloader, V1
+ .word 0xDCFB ; Signature for a LUFA class bootloader
-<asf xmlversion="1.0">\r
- <project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">\r
- <require idref="lufa.bootloaders.mass_storage"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1E000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>\r
-\r
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">\r
- <require idref="lufa.bootloaders.mass_storage"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb647"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0xE000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>\r
-\r
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">\r
- <require idref="lufa.bootloaders.mass_storage"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega32u4"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>\r
-\r
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">\r
- <require idref="lufa.bootloaders.mass_storage"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega16u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>\r
-\r
- <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">\r
- <info type="description" value="summary">\r
- Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="Bootloaders"/>\r
- <keyword value="USB Device"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="include-path" value="."/>\r
- <build type="c-source" value="BootloaderMassStorage.c"/>\r
- <build type="header-file" value="BootloaderMassStorage.h"/>\r
- <build type="c-source" value="Descriptors.c"/>\r
- <build type="header-file" value="Descriptors.h"/>\r
- <build type="c-source" value="BootloaderAPI.c"/>\r
- <build type="header-file" value="BootloaderAPI.h"/>\r
- <build type="asm-source" value="BootloaderAPITable.S"/>\r
-\r
- <build type="module-config" subtype="path" value="Config"/>\r
- <build type="header-file" value="Config/LUFAConfig.h"/>\r
- <build type="header-file" value="Config/AppConfig.h"/>\r
-\r
- <build type="include-path" value="Lib"/>\r
- <build type="header-file" value="Lib/VirtualFAT.h"/>\r
- <build type="c-source" value="Lib/VirtualFAT.c"/>\r
- <build type="header-file" value="Lib/SCSI.h"/>\r
- <build type="c-source" value="Lib/SCSI.c"/>\r
-\r
- <build type="distribute" subtype="user-file" value="doxyfile"/>\r
- <build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- <require idref="lufa.drivers.board.leds"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+ <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+ <require idref="lufa.bootloaders.mass_storage"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+ <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+ <info type="description" value="summary">
+ Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderMassStorage.c"/>
+ <build type="header-file" value="BootloaderMassStorage.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+
+ <build type="include-path" value="Lib"/>
+ <build type="header-file" value="Lib/VirtualFAT.h"/>
+ <build type="c-source" value="Lib/VirtualFAT.c"/>
+ <build type="header-file" value="Lib/SCSI.h"/>
+ <build type="c-source" value="Lib/SCSI.c"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
-#\r
-# LUFA Library\r
-# Copyright (C) Dean Camera, 2014.\r
-#\r
-# dean [at] fourwalledcubicle [dot] com\r
-# www.lufa-lib.org\r
-#\r
-# --------------------------------------\r
-# LUFA Project Makefile.\r
-# --------------------------------------\r
-\r
-# Run "make help" for target help.\r
-\r
-MCU = at90usb1287\r
-ARCH = AVR8\r
-BOARD = USBKEY\r
-F_CPU = 8000000\r
-F_USB = $(F_CPU)\r
-OPTIMIZATION = s\r
-TARGET = BootloaderMassStorage\r
-SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)\r
-LUFA_PATH = ../../LUFA\r
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)\r
-LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)\r
-\r
-# Flash size and bootloader section sizes of the target, in KB. These must\r
-# match the target's total FLASH size and the bootloader size set in the\r
-# device's fuses.\r
-FLASH_SIZE_KB = 128\r
-BOOT_SECTION_SIZE_KB = 8\r
-\r
-# Bootloader address calculation formulas\r
-# Do not modify these macros, but rather modify the dependent values above.\r
-CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )\r
-BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )\r
-BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )\r
-\r
-# Bootloader linker section flags for relocating the API table sections to\r
-# known FLASH addresses - these should not normally be user-edited.\r
-BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))\r
-BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)\r
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)\r
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)\r
-\r
-# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the\r
-# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum\r
-# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.\r
-ifeq ($(BOOT_SECTION_SIZE_KB),8)\r
- CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0\r
-else\r
- AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))\r
-\r
- CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'\r
- LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))\r
- LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)\r
-endif\r
-\r
-# Default target\r
-all:\r
-\r
-# Include LUFA build script makefiles\r
-include $(LUFA_PATH)/Build/lufa_core.mk\r
-include $(LUFA_PATH)/Build/lufa_sources.mk\r
-include $(LUFA_PATH)/Build/lufa_build.mk\r
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk\r
-include $(LUFA_PATH)/Build/lufa_doxygen.mk\r
-include $(LUFA_PATH)/Build/lufa_avrdude.mk\r
-include $(LUFA_PATH)/Build/lufa_atprogram.mk\r
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2014.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+BOARD = USBKEY
+F_CPU = 8000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = BootloaderMassStorage
+SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH = ../../LUFA
+CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB = 128
+BOOT_SECTION_SIZE_KB = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
+
+# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
+# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
+# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
+ifeq ($(BOOT_SECTION_SIZE_KB),8)
+ CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
+else
+ AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
+
+ CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
+ LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
+ LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
+endif
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2014.\r
-\r
- dean [at] fourwalledcubicle [dot] com\r
- www.lufa-lib.org\r
-*/\r
-\r
-/*\r
- Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this\r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in\r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaims all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-; Trampolines to actual API implementations if the target address is outside the\r
-; range of a rjmp instruction (can happen with large bootloader sections)\r
-.section .apitable_trampolines, "ax"\r
-.global BootloaderAPI_Trampolines\r
-BootloaderAPI_Trampolines:\r
-\r
- BootloaderAPI_ErasePage_Trampoline:\r
- jmp BootloaderAPI_ErasePage\r
- BootloaderAPI_WritePage_Trampoline:\r
- jmp BootloaderAPI_WritePage\r
- BootloaderAPI_FillWord_Trampoline:\r
- jmp BootloaderAPI_FillWord\r
- BootloaderAPI_ReadSignature_Trampoline:\r
- jmp BootloaderAPI_ReadSignature\r
- BootloaderAPI_ReadFuse_Trampoline:\r
- jmp BootloaderAPI_ReadFuse\r
- BootloaderAPI_ReadLock_Trampoline:\r
- jmp BootloaderAPI_ReadLock\r
- BootloaderAPI_WriteLock_Trampoline:\r
- jmp BootloaderAPI_WriteLock\r
- BootloaderAPI_UNUSED1:\r
- ret\r
- BootloaderAPI_UNUSED2:\r
- ret\r
- BootloaderAPI_UNUSED3:\r
- ret\r
- BootloaderAPI_UNUSED4:\r
- ret\r
- BootloaderAPI_UNUSED5:\r
- ret\r
-\r
-\r
-\r
-; API function jump table\r
-.section .apitable_jumptable, "ax"\r
-.global BootloaderAPI_JumpTable\r
-BootloaderAPI_JumpTable:\r
-\r
- rjmp BootloaderAPI_ErasePage_Trampoline\r
- rjmp BootloaderAPI_WritePage_Trampoline\r
- rjmp BootloaderAPI_FillWord_Trampoline\r
- rjmp BootloaderAPI_ReadSignature_Trampoline\r
- rjmp BootloaderAPI_ReadFuse_Trampoline\r
- rjmp BootloaderAPI_ReadLock_Trampoline\r
- rjmp BootloaderAPI_WriteLock_Trampoline\r
- rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1\r
- rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2\r
- rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3\r
- rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4\r
- rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5\r
-\r
-\r
-\r
-; Bootloader table signatures and information\r
-.section .apitable_signatures, "ax"\r
-.global BootloaderAPI_Signatures\r
-BootloaderAPI_Signatures:\r
-\r
- .long BOOT_START_ADDR ; Start address of the bootloader\r
- .word 0xDF20 ; Signature for the Printer class bootloader\r
- .word 0xDCFB ; Signature for a LUFA class bootloader\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2014.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+ BootloaderAPI_ErasePage_Trampoline:
+ jmp BootloaderAPI_ErasePage
+ BootloaderAPI_WritePage_Trampoline:
+ jmp BootloaderAPI_WritePage
+ BootloaderAPI_FillWord_Trampoline:
+ jmp BootloaderAPI_FillWord
+ BootloaderAPI_ReadSignature_Trampoline:
+ jmp BootloaderAPI_ReadSignature
+ BootloaderAPI_ReadFuse_Trampoline:
+ jmp BootloaderAPI_ReadFuse
+ BootloaderAPI_ReadLock_Trampoline:
+ jmp BootloaderAPI_ReadLock
+ BootloaderAPI_WriteLock_Trampoline:
+ jmp BootloaderAPI_WriteLock
+ BootloaderAPI_UNUSED1:
+ ret
+ BootloaderAPI_UNUSED2:
+ ret
+ BootloaderAPI_UNUSED3:
+ ret
+ BootloaderAPI_UNUSED4:
+ ret
+ BootloaderAPI_UNUSED5:
+ ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+ rjmp BootloaderAPI_ErasePage_Trampoline
+ rjmp BootloaderAPI_WritePage_Trampoline
+ rjmp BootloaderAPI_FillWord_Trampoline
+ rjmp BootloaderAPI_ReadSignature_Trampoline
+ rjmp BootloaderAPI_ReadFuse_Trampoline
+ rjmp BootloaderAPI_ReadLock_Trampoline
+ rjmp BootloaderAPI_WriteLock_Trampoline
+ rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+ rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+ rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+ rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+ rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+ .long BOOT_START_ADDR ; Start address of the bootloader
+ .word 0xDF20 ; Signature for the Printer class bootloader
+ .word 0xDCFB ; Signature for a LUFA class bootloader
-<asf xmlversion="1.0">\r
- <project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">\r
- <require idref="lufa.bootloaders.printer"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">\r
- <require idref="lufa.bootloaders.printer"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="at90usb647"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0xF000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">\r
- <require idref="lufa.bootloaders.printer"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega32u4"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x7000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">\r
- <require idref="lufa.bootloaders.printer"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega16u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x3000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">\r
- <require idref="lufa.bootloaders.printer"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8"/>\r
-\r
- <device-support value="atmega8u2"/>\r
- <config name="lufa.drivers.board.name" value="none"/>\r
-\r
- <config name="config.compiler.optimization.level" value="size"/>\r
-\r
- <build type="define" name="F_CPU" value="16000000UL"/>\r
- <build type="define" name="F_USB" value="16000000UL"/>\r
-\r
- <build type="define" name="BOOT_START_ADDR" value="0x1000"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>\r
-\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>\r
- <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>\r
- <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">\r
- <info type="description" value="summary">\r
- Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="Bootloaders"/>\r
- <keyword value="USB Device"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="include-path" value="."/>\r
- <build type="c-source" value="BootloaderPrinter.c"/>\r
- <build type="header-file" value="BootloaderPrinter.h"/>\r
- <build type="c-source" value="Descriptors.c"/>\r
- <build type="header-file" value="Descriptors.h"/>\r
- <build type="c-source" value="BootloaderAPI.c"/>\r
- <build type="header-file" value="BootloaderAPI.h"/>\r
- <build type="asm-source" value="BootloaderAPITable.S"/>\r
-\r
- <build type="module-config" subtype="path" value="Config"/>\r
- <build type="header-file" value="Config/LUFAConfig.h"/>\r
-\r
- <build type="distribute" subtype="user-file" value="doxyfile"/>\r
- <build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- <require idref="lufa.drivers.board.leds"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb647"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega32u4"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega16u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
+ <require idref="lufa.bootloaders.printer"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atmega8u2"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <config name="config.compiler.optimization.level" value="size"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+
+ <build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+ <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+ <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+ </project>
+
+ <module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
+ <info type="description" value="summary">
+ Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Bootloaders"/>
+ <keyword value="USB Device"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="include-path" value="."/>
+ <build type="c-source" value="BootloaderPrinter.c"/>
+ <build type="header-file" value="BootloaderPrinter.h"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="c-source" value="BootloaderAPI.c"/>
+ <build type="header-file" value="BootloaderAPI.h"/>
+ <build type="asm-source" value="BootloaderAPITable.S"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
-#\r
-# LUFA Library\r
-# Copyright (C) Dean Camera, 2014.\r
-#\r
-# dean [at] fourwalledcubicle [dot] com\r
-# www.lufa-lib.org\r
-#\r
-# --------------------------------------\r
-# LUFA Project Makefile.\r
-# --------------------------------------\r
-\r
-# Run "make help" for target help.\r
-\r
-MCU = at90usb1287\r
-ARCH = AVR8\r
-BOARD = USBKEY\r
-F_CPU = 8000000\r
-F_USB = $(F_CPU)\r
-OPTIMIZATION = s\r
-TARGET = BootloaderPrinter\r
-SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)\r
-LUFA_PATH = ../../LUFA\r
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)\r
-LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)\r
-\r
-# Flash size and bootloader section sizes of the target, in KB. These must\r
-# match the target's total FLASH size and the bootloader size set in the\r
-# device's fuses.\r
-FLASH_SIZE_KB = 128\r
-BOOT_SECTION_SIZE_KB = 8\r
-\r
-# Bootloader address calculation formulas\r
-# Do not modify these macros, but rather modify the dependent values above.\r
-CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )\r
-BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )\r
-BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )\r
-\r
-# Bootloader linker section flags for relocating the API table sections to\r
-# known FLASH addresses - these should not normally be user-edited.\r
-BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))\r
-BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)\r
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)\r
-BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)\r
-\r
-# Default target\r
-all:\r
-\r
-# Include LUFA build script makefiles\r
-include $(LUFA_PATH)/Build/lufa_core.mk\r
-include $(LUFA_PATH)/Build/lufa_sources.mk\r
-include $(LUFA_PATH)/Build/lufa_build.mk\r
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk\r
-include $(LUFA_PATH)/Build/lufa_doxygen.mk\r
-include $(LUFA_PATH)/Build/lufa_avrdude.mk\r
-include $(LUFA_PATH)/Build/lufa_atprogram.mk\r
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2014.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+BOARD = USBKEY
+F_CPU = 8000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = BootloaderPrinter
+SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH = ../../LUFA
+CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB = 128
+BOOT_SECTION_SIZE_KB = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
+BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
-#\r
-# LUFA Library\r
-# Copyright (C) Dean Camera, 2014.\r
-#\r
-# dean [at] fourwalledcubicle [dot] com\r
-# www.lufa-lib.org\r
-#\r
-# --------------------------------------\r
-# LUFA Project Makefile.\r
-# --------------------------------------\r
-\r
-# Run "make help" for target help.\r
-\r
-MCU = at90usb1287\r
-ARCH = AVR8\r
-F_CPU = 1000000\r
-F_USB = $(F_CPU)\r
-OPTIMIZATION = s\r
-TARGET = HID_EEPROM_Loader\r
-SRC = $(TARGET).c\r
-LUFA_PATH = ../../../LUFA\r
-CC_FLAGS =\r
-LD_FLAGS =\r
-OBJECT_FILES = InputEEData.o\r
-\r
-# Default target\r
-all:\r
-\r
-# Determine the AVR sub-architecture of the build main application object file\r
-FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)\r
-\r
-# Create a linkable object file with the input binary EEPROM data stored in the FLASH section\r
-InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)\r
- @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"\r
- avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@\r
-\r
-# Include LUFA build script makefiles\r
-include $(LUFA_PATH)/Build/lufa_core.mk\r
-include $(LUFA_PATH)/Build/lufa_build.mk\r
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk\r
-include $(LUFA_PATH)/Build/lufa_doxygen.mk\r
-include $(LUFA_PATH)/Build/lufa_hid.mk\r
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2014.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU = at90usb1287
+ARCH = AVR8
+F_CPU = 1000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = HID_EEPROM_Loader
+SRC = $(TARGET).c
+LUFA_PATH = ../../../LUFA
+CC_FLAGS =
+LD_FLAGS =
+OBJECT_FILES = InputEEData.o
+
+# Default target
+all:
+
+# Determine the AVR sub-architecture of the build main application object file
+FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
+
+# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
+InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
+ @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
+ avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
-<asf xmlversion="1.0">\r
- <project caption="USB Device Template" id="lufa.templates.device.project.avr8">\r
- <require idref="lufa.templates.device"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8_template"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="usbkey"/>\r
-\r
- <build type="define" name="F_CPU" value="8000000UL"/>\r
- <build type="define" name="F_USB" value="8000000UL"/>\r
- </project>\r
-\r
- <project caption="USB Device Template" id="lufa.templates.device.project.xmega">\r
- <require idref="lufa.templates.device"/>\r
- <require idref="lufa.boards.dummy.xmega"/>\r
- <generator value="as5_8_template"/>\r
-\r
- <device-support value="atxmega256a3bu"/>\r
- <config name="lufa.drivers.board.name" value="a3bu_xplained"/>\r
-\r
- <build type="define" name="F_CPU" value="32000000UL"/>\r
- <build type="define" name="F_USB" value="48000000UL"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.templates.device" caption="USB Device Template">\r
- <info type="description" value="summary">\r
- Template for a LUFA USB device mode application.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="USB Device"/>\r
- <keyword value="Template Projects"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="c-source" value="DeviceApplication.c"/>\r
- <build type="c-source" value="Descriptors.c"/>\r
- <build type="header-file" value="DeviceApplication.h"/>\r
- <build type="header-file" value="Descriptors.h"/>\r
-\r
- <build type="module-config" subtype="path" value=".."/>\r
- <build type="header-file" value="../LUFAConfig.h"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="USB Device Template" id="lufa.templates.device.project.avr8">
+ <require idref="lufa.templates.device"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8_template"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="usbkey"/>
+
+ <build type="define" name="F_CPU" value="8000000UL"/>
+ <build type="define" name="F_USB" value="8000000UL"/>
+ </project>
+
+ <project caption="USB Device Template" id="lufa.templates.device.project.xmega">
+ <require idref="lufa.templates.device"/>
+ <require idref="lufa.boards.dummy.xmega"/>
+ <generator value="as5_8_template"/>
+
+ <device-support value="atxmega256a3bu"/>
+ <config name="lufa.drivers.board.name" value="a3bu_xplained"/>
+
+ <build type="define" name="F_CPU" value="32000000UL"/>
+ <build type="define" name="F_USB" value="48000000UL"/>
+ </project>
+
+ <module type="application" id="lufa.templates.device" caption="USB Device Template">
+ <info type="description" value="summary">
+ Template for a LUFA USB device mode application.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="USB Device"/>
+ <keyword value="Template Projects"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="c-source" value="DeviceApplication.c"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="header-file" value="DeviceApplication.h"/>
+ <build type="header-file" value="Descriptors.h"/>
+
+ <build type="module-config" subtype="path" value=".."/>
+ <build type="header-file" value="../LUFAConfig.h"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ </module>
+</asf>
-<asf xmlversion="1.0">\r
- <project caption="USB Host Template" id="lufa.templates.host.project">\r
- <require idref="lufa.templates.host"/>\r
- <require idref="lufa.boards.dummy.avr8"/>\r
- <generator value="as5_8_template"/>\r
-\r
- <device-support value="at90usb1287"/>\r
- <config name="lufa.drivers.board.name" value="usbkey"/>\r
-\r
- <build type="define" name="F_CPU" value="8000000UL"/>\r
- <build type="define" name="F_USB" value="8000000UL"/>\r
- </project>\r
-\r
- <module type="application" id="lufa.templates.host" caption="USB Host Template">\r
- <info type="description" value="summary">\r
- Template for a LUFA USB host mode application.\r
- </info>\r
-\r
- <info type="gui-flag" value="move-to-root"/>\r
-\r
- <info type="keyword" value="Technology">\r
- <keyword value="USB Host"/>\r
- <keyword value="Template Projects"/>\r
- </info>\r
-\r
- <device-support-alias value="lufa_avr8"/>\r
- <device-support-alias value="lufa_xmega"/>\r
- <device-support-alias value="lufa_uc3"/>\r
-\r
- <build type="c-source" value="HostApplication.c"/>\r
- <build type="header-file" value="HostApplication.h"/>\r
-\r
- <build type="module-config" subtype="path" value=".."/>\r
- <build type="header-file" value="../LUFAConfig.h"/>\r
-\r
- <require idref="lufa.common"/>\r
- <require idref="lufa.platform"/>\r
- <require idref="lufa.drivers.usb"/>\r
- <require idref="lufa.drivers.board"/>\r
- </module>\r
-</asf>\r
+<asf xmlversion="1.0">
+ <project caption="USB Host Template" id="lufa.templates.host.project">
+ <require idref="lufa.templates.host"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8_template"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="usbkey"/>
+
+ <build type="define" name="F_CPU" value="8000000UL"/>
+ <build type="define" name="F_USB" value="8000000UL"/>
+ </project>
+
+ <module type="application" id="lufa.templates.host" caption="USB Host Template">
+ <info type="description" value="summary">
+ Template for a LUFA USB host mode application.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="USB Host"/>
+ <keyword value="Template Projects"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="c-source" value="HostApplication.c"/>
+ <build type="header-file" value="HostApplication.h"/>
+
+ <build type="module-config" subtype="path" value=".."/>
+ <build type="header-file" value="../LUFAConfig.h"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ </module>
+</asf>
-/** \file\r
- *\r
- * This file contains special DoxyGen information for the generation of the main page and other special\r
- * documentation pages. It is not a project source file.\r
- */\r
-\r
-/** \page Page_BuildSystem The LUFA Build System\r
- *\r
- * \section Sec_BuildSystem_Overview Overview of the LUFA Build System\r
- * The LUFA build system is an attempt at making a set of re-usable, modular build make files which\r
- * can be referenced in a LUFA powered project, to minimize the amount of code required in an\r
- * application makefile. The system is written in GNU Make, and each module is independent of\r
- * one-another.\r
- *\r
- * For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA\r
- * build system, see \ref Sec_CompilingApps_Prerequisites.\r
- *\r
- * To use a LUFA build system module, simply add an include to your project makefile. All user projects\r
- * should at a minimum include \ref Page_BuildModule_CORE for base functionality:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_core.mk\r
- * \endcode\r
- *\r
- * Once included in your project makefile, the associated build module targets will be added to your\r
- * project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>\r
- * from the command line, substituting in the appropriate target name.\r
- *\r
- * \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.\r
- *\r
- * Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>\r
- * be supplied in the project makefile for the module to work, and one or more optional parameters which\r
- * may be defined and which will assume a sensible default if not.\r
- *\r
- * \section SSec_BuildSystem_Modules Available Modules\r
- *\r
- * The following modules are included in this LUFA release:\r
- *\r
- * \li \subpage Page_BuildModule_ATPROGRAM - Device Programming\r
- * \li \subpage Page_BuildModule_AVRDUDE - Device Programming\r
- * \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking\r
- * \li \subpage Page_BuildModule_CORE - Core Build System Functions\r
- * \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis\r
- * \li \subpage Page_BuildModule_DFU - Device Programming\r
- * \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation\r
- * \li \subpage Page_BuildModule_HID - Device Programming\r
- * \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables\r
- *\r
- * If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.\r
- */\r
-\r
- /** \page Page_BuildModule_BUILD The BUILD build module\r
- *\r
- * The BUILD LUFA build system module, providing targets for the compilation,\r
- * assembling and linking of an application from source code into binary files\r
- * suitable for programming into a target device, using the GCC compiler.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_build.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_BUILD_Requirements Requirements\r
- * This module requires the the architecture appropriate binaries of the GCC compiler are available in your\r
- * system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio\r
- * 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.\r
- *\r
- * \section SSec_BuildModule_BUILD_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>size</tt></td>\r
- * <td>Display size of the compiled application FLASH and SRAM segments.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>symbol-sizes</tt></td>\r
- * <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>lib</tt></td>\r
- * <td>Build and archive all source files into a library A binary file.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>all</tt></td>\r
- * <td>Build and link the application into ELF debug and HEX binary files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>elf</tt></td>\r
- * <td>Build and link the application into an ELF debug file.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>bin</tt></td>\r
- * <td>Build and link the application and produce a BIN binary file.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>hex</tt></td>\r
- * <td>Build and link the application and produce HEX and EEP binary files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>lss</tt></td>\r
- * <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>clean</tt></td>\r
- * <td>Remove all intermediary files and binary output files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>mostlyclean</tt></td>\r
- * <td>Remove all intermediary files but preserve any binary output files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt><i><filename></i>.s</tt></td>\r
- * <td>Create an assembly listing of a given input C/C++ source file.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>TARGET</tt></td>\r
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>ARCH</tt></td>\r
- * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>MCU</tt></td>\r
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>SRC</tt></td>\r
- * <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>F_USB</tt></td>\r
- * <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LUFA_PATH</tt></td>\r
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>BOARD</tt></td>\r
- * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>OPTIMIZATION</tt></td>\r
- * <td>Optimization level to use when compiling source files (see GCC manual).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>C_STANDARD</tt></td>\r
- * <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPP_STANDARD</tt></td>\r
- * <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>DEBUG_FORMAT</tt></td>\r
- * <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>DEBUG_LEVEL</tt></td>\r
- * <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>F_CPU</tt></td>\r
- * <td>Speed of the processor CPU clock, in Hz.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>C_FLAGS</tt></td>\r
- * <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPP_FLAGS</tt></td>\r
- * <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>ASM_FLAGS</tt></td>\r
- * <td>Flags to pass to the assembler only, after the automatically generated flags.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CC_FLAGS</tt></td>\r
- * <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>COMPILER_PATH</tt></td>\r
- * <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LD_FLAGS</tt></td>\r
- * <td>Flags to pass to the linker, after the automatically generated flags.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LINKER_RELAXATIONS</tt></td>\r
- * <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size\r
- * of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.\r
- * \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you\r
- * receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>OBJDIR</tt></td>\r
- * <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.\r
- * \note When this option is enabled, all source filenames <b>must</b> be unique.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>OBJECT_FILES</tt></td>\r
- * <td>List of additional object files that should be linked into the resulting binary.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
-/** \page Page_BuildModule_CORE The CORE build module\r
- *\r
- * The core LUFA build system module, providing common build system help and information targets.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_core.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_CORE_Requirements Requirements\r
- * This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>\r
- * shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).\r
- *\r
- * \section SSec_BuildModule_CORE_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>help</tt></td>\r
- * <td>Display build system help and configuration information.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>list_targets</tt></td>\r
- * <td>List all available build targets from the build system.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>list_modules</tt></td>\r
- * <td>List all available build modules from the build system.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>list_mandatory</tt></td>\r
- * <td>List all mandatory parameters required by the included modules.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>list_optional</tt></td>\r
- * <td>List all optional parameters required by the included modules.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>list_provided</tt></td>\r
- * <td>List all variables provided by the included modules.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>list_macros</tt></td>\r
- * <td>List all macros provided by the included modules.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CORE_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
-/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module\r
- *\r
- * The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an\r
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_atprogram.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements\r
- * This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>\r
- * variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x\r
- * inside the application install folder's "\atbackend" subdirectory.\r
- *\r
- * \section SSec_BuildModule_ATPROGRAM_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>atprogram</tt></td>\r
- * <td>Program the device FLASH memory with the application's executable data.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>atprogram-ee</tt></td>\r
- * <td>Program the device EEPROM memory with the application's EEPROM data.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>MCU</tt></td>\r
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>TARGET</tt></td>\r
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>ATPROGRAM_PROGRAMMER</tt></td>\r
- * <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>ATPROGRAM_INTERFACE</tt></td>\r
- * <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>ATPROGRAM_PORT</tt></td>\r
- * <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
-/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module\r
- *\r
- * The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an\r
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_avrdude.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_AVRDUDE_Requirements Requirements\r
- * This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>\r
- * variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for\r
- * Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's\r
- * source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.\r
- *\r
- * \section SSec_BuildModule_AVRDUDE_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>avrdude</tt></td>\r
- * <td>Program the device FLASH memory with the application's executable data.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>avrdude-ee</tt></td>\r
- * <td>Program the device EEPROM memory with the application's EEPROM data.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>MCU</tt></td>\r
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>TARGET</tt></td>\r
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>AVRDUDE_PROGRAMMER</tt></td>\r
- * <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>AVRDUDE_PORT</tt></td>\r
- * <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>AVRDUDE_FLAGS</tt></td>\r
- * <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
- /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module\r
- *\r
- * The CPPCHECK programming utility LUFA build system module, providing targets to statically\r
- * analyze C and C++ source code for errors and performance/style issues.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_cppcheck.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_CPPCHECK_Requirements Requirements\r
- * This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>\r
- * variable. The <tt>cppcheck</tt> utility is distributed through the project's home page\r
- * (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via\r
- * the project's source code or through the package manager.\r
- *\r
- * \section SSec_BuildModule_CPPCHECK_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>cppcheck</tt></td>\r
- * <td>Statically analyze the project source code for issues.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>cppcheck-config</tt></td>\r
- * <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>SRC</tt></td>\r
- * <td>List of source files to statically analyze.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>CPPCHECK_INCLUDES</tt></td>\r
- * <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_EXCLUDES</tt></td>\r
- * <td>Paths or path fragments to exclude when analyzing.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>\r
- * <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_ENABLE</tt></td>\r
- * <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_SUPPRESS</tt></td>\r
- * <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>\r
- * <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_QUIET</tt></td>\r
- * <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>CPPCHECK_FLAGS</tt></td>\r
- * <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
- /** \page Page_BuildModule_DFU The DFU build module\r
- *\r
- * The DFU programming utility LUFA build system module, providing targets to reprogram an\r
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.\r
- * This module requires a DFU class bootloader to be running in the target, compatible with\r
- * the DFU bootloader protocol as published by Atmel.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_dfu.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_DFU_Requirements Requirements\r
- * This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open\r
- * source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be\r
- * available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility\r
- * can be installed via the project's source code or through the package manager.\r
- *\r
- * \section SSec_BuildModule_DFU_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>dfu</tt></td>\r
- * <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>dfu-ee</tt></td>\r
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>flip</tt></td>\r
- * <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>flip-ee</tt></td>\r
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>MCU</tt></td>\r
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>TARGET</tt></td>\r
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DFU_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
- /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module\r
- *\r
- * The DOXYGEN code documentation utility LUFA build system module, providing targets to generate\r
- * project HTML and other format documentation from a set of source files that include special\r
- * Doxygen comments.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_doxygen.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_DOXYGEN_Requirements Requirements\r
- * This module requires the <tt>doxygen</tt> utility from the Doxygen website\r
- * (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix\r
- * systems the <tt>doxygen</tt> utility can be installed via the project's source code or through\r
- * the package manager.\r
- *\r
- * \section SSec_BuildModule_DOXYGEN_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>doxygen</tt></td>\r
- * <td>Generate project documentation.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>doxygen_create</tt></td>\r
- * <td>Create a new Doxygen configuration file using the latest template.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>doxygen_upgrade</tt></td>\r
- * <td>Upgrade an existing Doxygen configuration file to the latest template</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>LUFA_PATH</tt></td>\r
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>DOXYGEN_CONF</tt></td>\r
- * <td>Name and path of the base Doxygen configuration file for the project.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>\r
- * <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>\r
- * <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
- /** \page Page_BuildModule_HID The HID build module\r
- *\r
- * The HID programming utility LUFA build system module, providing targets to reprogram an\r
- * Atmel processor's FLASH memory with a project's compiled binary output file. This module\r
- * requires a HID class bootloader to be running in the target, using a protocol compatible\r
- * with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_hid.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_HID_Requirements Requirements\r
- * This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID\r
- * class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC\r
- * (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>\r
- * variable.\r
- *\r
- * \section SSec_BuildModule_HID_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>hid</tt></td>\r
- * <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>hid-ee</tt></td>\r
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and\r
- * a temporary AVR application programmed into the target's FLASH.\r
- * \note This will erase the currently loaded application in the target.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>teensy</tt></td>\r
- * <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>teensy-ee</tt></td>\r
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and\r
- * a temporary AVR application programmed into the target's FLASH.\r
- * \note This will erase the currently loaded application in the target.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>MCU</tt></td>\r
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>TARGET</tt></td>\r
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_HID_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
- /** \page Page_BuildModule_SOURCES The SOURCES build module\r
- *\r
- * The SOURCES LUFA build system module, providing variables listing the various LUFA source files\r
- * required to be build by a project for a given LUFA module. This module gives a way to reference\r
- * LUFA source files symbolically, so that changes to the library structure do not break the library\r
- * makefile.\r
- *\r
- * To use this module in your application makefile, add the following code:\r
- * \code\r
- * include $(LUFA_PATH)/Build/lufa_sources.mk\r
- * \endcode\r
- *\r
- * \section SSec_BuildModule_SOURCES_Requirements Requirements\r
- * None.\r
- *\r
- * \section SSec_BuildModule_SOURCES_Targets Targets\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>LUFA_PATH</tt></td>\r
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>ARCH</tt></td>\r
- * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><tt>LUFA_SRC_USB</tt></td>\r
- * <td>List of LUFA USB driver source files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LUFA_SRC_USBCLASS</tt></td>\r
- * <td>List of LUFA USB Class driver source files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LUFA_SRC_TEMPERATURE</tt></td>\r
- * <td>List of LUFA temperature sensor driver source files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LUFA_SRC_SERIAL</tt></td>\r
- * <td>List of LUFA Serial U(S)ART driver source files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LUFA_SRC_TWI</tt></td>\r
- * <td>List of LUFA TWI driver source files.</td>\r
- * </tr>\r
- * <tr>\r
- * <td><tt>LUFA_SRC_PLATFORM</tt></td>\r
- * <td>List of LUFA architecture specific platform management source files.</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><i>None</i></td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
-/** \page Page_BuildTroubleshooting Troubleshooting Information\r
- *\r
- * LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these\r
- * features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different\r
- * errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.\r
- *\r
- * <table>\r
- * <tr>\r
- * <th>Problem</th>\r
- * <th>Resolution</th>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>" shown when compiling.</td>\r
- * <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>\r
- * from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>" shown when compiling.</td>\r
- * <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>" shown when compiling.</td>\r
- * <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with\r
- * GNU make or other variants of Make causing an infinitely recursive build.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Unsupported architecture "<i>{X}</i>"</tt></b>" shown when compiling.</td>\r
- * <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Makefile <i>{X}</i> value not set</tt></b>" shown when compiling.</td>\r
- * <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA\r
- * build system modules. Define the value in your project makefile and try again.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>" shown when compiling.</td>\r
- * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration\r
- * option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>" shown when compiling.</td>\r
- * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").\r
- * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>" shown when compiling.</td>\r
- * <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not\r
- * recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>" shown when compiling.</td>\r
- * <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.\r
- * This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Source file does not exist: <i>{X}</i></tt></b>" shown when compiling.</td>\r
- * <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or\r
- * relative path given in the user project makefile is correct and try again.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>" shown when upgrading a Doxygen configuration file.</td>\r
- * <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists\r
- * and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration\r
- * file.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>" shown when compiling.</td>\r
- * <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration\r
- * options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or\r
- * upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>" shown when make is invoked.</td>\r
- * <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or\r
- * absolute path to the LUFA library core.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>" shown when compiling.</td>\r
- * <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be\r
- * found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>\r
- * parameter.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>" shown when compiling a bootloader.</td>\r
- * <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This\r
- * usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the\r
- * compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>" shown when compiling.</td>\r
- * <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the\r
- * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>\r
- * </tr>\r
- * <tr>\r
- * <td>Error "<b><tt>undefined reference to `<i>{X}</i>'</tt></b>" shown when compiling.</td>\r
- * <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA\r
- * library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.\r
- */\r
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \page Page_BuildSystem The LUFA Build System
+ *
+ * \section Sec_BuildSystem_Overview Overview of the LUFA Build System
+ * The LUFA build system is an attempt at making a set of re-usable, modular build make files which
+ * can be referenced in a LUFA powered project, to minimize the amount of code required in an
+ * application makefile. The system is written in GNU Make, and each module is independent of
+ * one-another.
+ *
+ * For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
+ * build system, see \ref Sec_CompilingApps_Prerequisites.
+ *
+ * To use a LUFA build system module, simply add an include to your project makefile. All user projects
+ * should at a minimum include \ref Page_BuildModule_CORE for base functionality:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_core.mk
+ * \endcode
+ *
+ * Once included in your project makefile, the associated build module targets will be added to your
+ * project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
+ * from the command line, substituting in the appropriate target name.
+ *
+ * \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
+ *
+ * Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
+ * be supplied in the project makefile for the module to work, and one or more optional parameters which
+ * may be defined and which will assume a sensible default if not.
+ *
+ * \section SSec_BuildSystem_Modules Available Modules
+ *
+ * The following modules are included in this LUFA release:
+ *
+ * \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
+ * \li \subpage Page_BuildModule_AVRDUDE - Device Programming
+ * \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
+ * \li \subpage Page_BuildModule_CORE - Core Build System Functions
+ * \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
+ * \li \subpage Page_BuildModule_DFU - Device Programming
+ * \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
+ * \li \subpage Page_BuildModule_HID - Device Programming
+ * \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
+ *
+ * If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
+ */
+
+ /** \page Page_BuildModule_BUILD The BUILD build module
+ *
+ * The BUILD LUFA build system module, providing targets for the compilation,
+ * assembling and linking of an application from source code into binary files
+ * suitable for programming into a target device, using the GCC compiler.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_build.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_BUILD_Requirements Requirements
+ * This module requires the the architecture appropriate binaries of the GCC compiler are available in your
+ * system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
+ * 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
+ *
+ * \section SSec_BuildModule_BUILD_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>size</tt></td>
+ * <td>Display size of the compiled application FLASH and SRAM segments.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>symbol-sizes</tt></td>
+ * <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>lib</tt></td>
+ * <td>Build and archive all source files into a library A binary file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>all</tt></td>
+ * <td>Build and link the application into ELF debug and HEX binary files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>elf</tt></td>
+ * <td>Build and link the application into an ELF debug file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>bin</tt></td>
+ * <td>Build and link the application and produce a BIN binary file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>hex</tt></td>
+ * <td>Build and link the application and produce HEX and EEP binary files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>lss</tt></td>
+ * <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>clean</tt></td>
+ * <td>Remove all intermediary files and binary output files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>mostlyclean</tt></td>
+ * <td>Remove all intermediary files but preserve any binary output files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt><i><filename></i>.s</tt></td>
+ * <td>Create an assembly listing of a given input C/C++ source file.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ARCH</tt></td>
+ * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>SRC</tt></td>
+ * <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>F_USB</tt></td>
+ * <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_PATH</tt></td>
+ * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>BOARD</tt></td>
+ * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>OPTIMIZATION</tt></td>
+ * <td>Optimization level to use when compiling source files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>C_STANDARD</tt></td>
+ * <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPP_STANDARD</tt></td>
+ * <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DEBUG_FORMAT</tt></td>
+ * <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DEBUG_LEVEL</tt></td>
+ * <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>F_CPU</tt></td>
+ * <td>Speed of the processor CPU clock, in Hz.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>C_FLAGS</tt></td>
+ * <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPP_FLAGS</tt></td>
+ * <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ASM_FLAGS</tt></td>
+ * <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CC_FLAGS</tt></td>
+ * <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>COMPILER_PATH</tt></td>
+ * <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LD_FLAGS</tt></td>
+ * <td>Flags to pass to the linker, after the automatically generated flags.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LINKER_RELAXATIONS</tt></td>
+ * <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
+ * of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
+ * \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
+ * receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>OBJDIR</tt></td>
+ * <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
+ * \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>OBJECT_FILES</tt></td>
+ * <td>List of additional object files that should be linked into the resulting binary.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildModule_CORE The CORE build module
+ *
+ * The core LUFA build system module, providing common build system help and information targets.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_core.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_CORE_Requirements Requirements
+ * This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
+ * shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
+ *
+ * \section SSec_BuildModule_CORE_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>help</tt></td>
+ * <td>Display build system help and configuration information.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_targets</tt></td>
+ * <td>List all available build targets from the build system.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_modules</tt></td>
+ * <td>List all available build modules from the build system.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_mandatory</tt></td>
+ * <td>List all mandatory parameters required by the included modules.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_optional</tt></td>
+ * <td>List all optional parameters required by the included modules.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_provided</tt></td>
+ * <td>List all variables provided by the included modules.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>list_macros</tt></td>
+ * <td>List all macros provided by the included modules.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
+ *
+ * The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_atprogram.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
+ * This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
+ * variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
+ * inside the application install folder's "\atbackend" subdirectory.
+ *
+ * \section SSec_BuildModule_ATPROGRAM_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>atprogram</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>atprogram-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
+ * <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ATPROGRAM_INTERFACE</tt></td>
+ * <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ATPROGRAM_PORT</tt></td>
+ * <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
+ *
+ * The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_avrdude.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_AVRDUDE_Requirements Requirements
+ * This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
+ * variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
+ * Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
+ * source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
+ *
+ * \section SSec_BuildModule_AVRDUDE_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>avrdude</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>avrdude-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>AVRDUDE_PROGRAMMER</tt></td>
+ * <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>AVRDUDE_PORT</tt></td>
+ * <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>AVRDUDE_FLAGS</tt></td>
+ * <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
+ *
+ * The CPPCHECK programming utility LUFA build system module, providing targets to statically
+ * analyze C and C++ source code for errors and performance/style issues.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_CPPCHECK_Requirements Requirements
+ * This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
+ * variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
+ * (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
+ * the project's source code or through the package manager.
+ *
+ * \section SSec_BuildModule_CPPCHECK_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>cppcheck</tt></td>
+ * <td>Statically analyze the project source code for issues.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>cppcheck-config</tt></td>
+ * <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>SRC</tt></td>
+ * <td>List of source files to statically analyze.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>CPPCHECK_INCLUDES</tt></td>
+ * <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_EXCLUDES</tt></td>
+ * <td>Paths or path fragments to exclude when analyzing.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
+ * <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_ENABLE</tt></td>
+ * <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_SUPPRESS</tt></td>
+ * <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
+ * <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_QUIET</tt></td>
+ * <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>CPPCHECK_FLAGS</tt></td>
+ * <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_DFU The DFU build module
+ *
+ * The DFU programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ * This module requires a DFU class bootloader to be running in the target, compatible with
+ * the DFU bootloader protocol as published by Atmel.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_dfu.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_DFU_Requirements Requirements
+ * This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
+ * source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
+ * available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
+ * can be installed via the project's source code or through the package manager.
+ *
+ * \section SSec_BuildModule_DFU_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>dfu</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>dfu-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>flip</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>flip-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
+ *
+ * The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
+ * project HTML and other format documentation from a set of source files that include special
+ * Doxygen comments.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_doxygen.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_DOXYGEN_Requirements Requirements
+ * This module requires the <tt>doxygen</tt> utility from the Doxygen website
+ * (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
+ * systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
+ * the package manager.
+ *
+ * \section SSec_BuildModule_DOXYGEN_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>doxygen</tt></td>
+ * <td>Generate project documentation.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>doxygen_create</tt></td>
+ * <td>Create a new Doxygen configuration file using the latest template.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>doxygen_upgrade</tt></td>
+ * <td>Upgrade an existing Doxygen configuration file to the latest template</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>LUFA_PATH</tt></td>
+ * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>DOXYGEN_CONF</tt></td>
+ * <td>Name and path of the base Doxygen configuration file for the project.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
+ * <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
+ * <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_HID The HID build module
+ *
+ * The HID programming utility LUFA build system module, providing targets to reprogram an
+ * Atmel processor's FLASH memory with a project's compiled binary output file. This module
+ * requires a HID class bootloader to be running in the target, using a protocol compatible
+ * with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_hid.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_HID_Requirements Requirements
+ * This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
+ * class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
+ * (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
+ * variable.
+ *
+ * \section SSec_BuildModule_HID_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><tt>hid</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>hid-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
+ * a temporary AVR application programmed into the target's FLASH.
+ * \note This will erase the currently loaded application in the target.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>teensy</tt></td>
+ * <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>teensy-ee</tt></td>
+ * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
+ * a temporary AVR application programmed into the target's FLASH.
+ * \note This will erase the currently loaded application in the target.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>MCU</tt></td>
+ * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>TARGET</tt></td>
+ * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+ /** \page Page_BuildModule_SOURCES The SOURCES build module
+ *
+ * The SOURCES LUFA build system module, providing variables listing the various LUFA source files
+ * required to be build by a project for a given LUFA module. This module gives a way to reference
+ * LUFA source files symbolically, so that changes to the library structure do not break the library
+ * makefile.
+ *
+ * To use this module in your application makefile, add the following code:
+ * \code
+ * include $(LUFA_PATH)/Build/lufa_sources.mk
+ * \endcode
+ *
+ * \section SSec_BuildModule_SOURCES_Requirements Requirements
+ * None.
+ *
+ * \section SSec_BuildModule_SOURCES_Targets Targets
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><tt>LUFA_PATH</tt></td>
+ * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td><tt>ARCH</tt></td>
+ * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
+ *
+ * <table>
+ * <tr>
+ * <td><tt>LUFA_SRC_USB</tt></td>
+ * <td>List of LUFA USB driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_USBCLASS</tt></td>
+ * <td>List of LUFA USB Class driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
+ * <td>List of LUFA temperature sensor driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_SERIAL</tt></td>
+ * <td>List of LUFA Serial U(S)ART driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_TWI</tt></td>
+ * <td>List of LUFA TWI driver source files.</td>
+ * </tr>
+ * <tr>
+ * <td><tt>LUFA_SRC_PLATFORM</tt></td>
+ * <td>List of LUFA architecture specific platform management source files.</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
+ *
+ * <table>
+ * <tr>
+ * <td><i>None</i></td>
+ * </tr>
+ * </table>
+ */
+
+/** \page Page_BuildTroubleshooting Troubleshooting Information
+ *
+ * LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
+ * features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
+ * errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
+ *
+ * <table>
+ * <tr>
+ * <th>Problem</th>
+ * <th>Resolution</th>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>" shown when compiling.</td>
+ * <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
+ * from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>" shown when compiling.</td>
+ * <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>" shown when compiling.</td>
+ * <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
+ * GNU make or other variants of Make causing an infinitely recursive build.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Unsupported architecture "<i>{X}</i>"</tt></b>" shown when compiling.</td>
+ * <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Makefile <i>{X}</i> value not set</tt></b>" shown when compiling.</td>
+ * <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
+ * build system modules. Define the value in your project makefile and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>" shown when compiling.</td>
+ * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
+ * option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>" shown when compiling.</td>
+ * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
+ * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>" shown when compiling.</td>
+ * <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
+ * recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>" shown when compiling.</td>
+ * <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
+ * This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Source file does not exist: <i>{X}</i></tt></b>" shown when compiling.</td>
+ * <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
+ * relative path given in the user project makefile is correct and try again.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>" shown when upgrading a Doxygen configuration file.</td>
+ * <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
+ * and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
+ * file.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>" shown when compiling.</td>
+ * <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
+ * options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
+ * upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>" shown when make is invoked.</td>
+ * <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
+ * absolute path to the LUFA library core.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>" shown when compiling.</td>
+ * <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
+ * found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
+ * parameter.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>" shown when compiling a bootloader.</td>
+ * <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
+ * usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
+ * compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>" shown when compiling.</td>
+ * <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
+ * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
+ * </tr>
+ * <tr>
+ * <td>Error "<b><tt>undefined reference to `<i>{X}</i>'</tt></b>" shown when compiling.</td>
+ * <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
+ * library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
+ * </tr>
+ * </table>
+ *
+ * For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
+ */
projects / qmk_firmware.git / commitdiff