RGB Inidcator example for new van pcbs (#6544)

* RGB Inidcator example for new van pcbs

* simplify config.h

As per @drashna in CR

diff --git a/keyboards/thevankeyboards/minivan/config.h b/keyboards/thevankeyboards/minivan/config.h
index 22fb37762940f3f31e320554c1a78347bbf6effa..7bc8192ed3a1cbc6d694b3673022c927825f5d43 100644 (file)
--- a/keyboards/thevankeyboards/minivan/config.h
+++ b/keyboards/thevankeyboards/minivan/config.h
@@ -66,91 +66,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+/* RGB Setup */
+#define RGB_DI_PIN D0
+#define RGBLED_NUM 3
+#define RGBLIGHT_SLEEP
 
 #endif

diff --git a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h
index 5f5872beccf7c0b74992a15d21e046f38a446479..426b76b3b19d967eb69c40fb4e02cc3c37da6817 100644 (file)
--- a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h
+++ b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h
@@ -1,7 +1,4 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
 
 #define PERMISSIVE_HOLD
-#endif
+#define RGBLIGHT_EFFECT_BREATHING

diff --git a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c
index 4c045ac0a57aada9bacdb39dab51c61a09937bab..f9bb64e05f291c19702f230db686d09e339aec11 100644 (file)
--- a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c
+++ b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c
@@ -11,13 +11,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
   [1] = LAYOUT_arrow_command( /* LAYER 2 */
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
-    KC_TRNS, KC_MINS, KC_EQL,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_QUOT, KC_TRNS,
+    KC_TRNS, KC_MINS, KC_EQL,  KC_SCLN, KC_QUOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_QUOT, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_PGUP, KC_BSLS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,          KC_TRNS, KC_HOME, KC_PGDN, KC_END
   ),
   [2] = LAYOUT_arrow_command( /* LAYER 1 */
     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
-    KC_TRNS, KC_UNDS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_TRNS,
+    KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_RCBR, KC_PGUP, KC_PIPE,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,          KC_TRNS, KC_HOME, KC_PGDN, KC_END
   ),
@@ -30,7 +30,54 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [4] = LAYOUT_arrow_command( /* Gaming Layer*/
     KC_ESC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_WH_U, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,
     KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LT(5, KC_SLSH),
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_SPACE, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+  [5] = LAYOUT_arrow_command( /* RESET Layer*/
+    RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
   )
 };
+
+void keyboard_post_init_user(void) {
+  #ifdef RGBLIGHT_ENABLE
+    // Set up RGB effects on _only_ the third LED (index 2)
+    rgblight_set_effect_range(2, 1);
+    // Set LED effects to breathing mode in a tealish blue color
+    rgblight_sethsv_noeeprom(185, 255, 255);
+    rgblight_mode_noeeprom(RGBLIGHT_EFFECT_BREATHING + 2);
+
+    // Init the first two LEDs to a static color
+    setrgb(0, 0, 0, (LED_TYPE *)&led[0]);
+    setrgb(0, 0, 0, (LED_TYPE *)&led[1]);
+    rgblight_set();
+  #endif //RGBLIGHT_ENABLE
+}
+
+uint32_t layer_state_set_user(uint32_t state){
+  #ifdef RGBLIGHT_ENABLE
+    uint8_t led0r = 0; uint8_t led0g = 0; uint8_t led0b = 0;
+    uint8_t led1r = 0; uint8_t led1g = 0; uint8_t led1b = 0;
+
+    if (layer_state_cmp(state, 1)) {
+      led0r = 255;
+    }
+    if (layer_state_cmp(state, 2)) {
+      led0g = 255;
+    }
+
+    if (layer_state_cmp(state, 4)) {
+      led1b = 255;
+    }
+    if (layer_state_cmp(state, 5)) {
+      led1r = 255;
+    }
+
+    setrgb(led0r, led0g, led0b, (LED_TYPE *)&led[0]);
+    setrgb(led1r, led1g, led1b, (LED_TYPE *)&led[1]);
+    rgblight_set();
+  #endif //RGBLIGHT_ENABLE
+  return state;
+}

diff --git a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk
index d7ca73ac58f2693c8c4f3e11bc0ec43bc62c6ba4..4a27701076f16b919c0eb2777ee140fc7e84bc1e 100644 (file)
--- a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk
+++ b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk
@@ -13,5 +13,5 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

diff --git a/keyboards/thevankeyboards/minivan/minivan.c b/keyboards/thevankeyboards/minivan/minivan.c
index b260195cec0cd9767ae7d6bdf74927733683fb05..19996f9208aaae34412e4394634c1be7ec64817e 100644 (file)
--- a/keyboards/thevankeyboards/minivan/minivan.c
+++ b/keyboards/thevankeyboards/minivan/minivan.c
@@ -1,28 +1 @@
 #include "minivan.h"
-
-void matrix_init_kb(void) {
-       // put your keyboard start-up code here
-       // runs once when the firmware starts up
-
-       matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-       // put your looping keyboard code here
-       // runs every cycle (a lot)
-
-       matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-       // put your per-action keyboard code here
-       // runs for every action, just before processing by the firmware
-
-       return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-       // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-       led_set_user(usb_led);
-}