Hardware Supported: YMD96 with the ATmega32a chip.
Hardware Availability: The GB was run June 2017, [in this thread](https://www.reddit.com/r/mechmarket/comments/6hu3yx/vendor_ymd96_gb_is_now_live_68_an_universal_and/). The vendor has stated that they plan on selling more rounds.
+A very big thanks to @krusli for making the RGB underglow, Backlight, CapsLock and NumLock LEDs working correctly.
+
## Finding your specific matrix
This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB), also found on this qmk repo, to work with the YMD96 keyboard. However, I only have one board to test with, which might have a different layout than yours. To get qmk working with your specific layout, you'll need to follow these steps:
--- /dev/null
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT (1 << 0) // 0th pin of Port D (digital)
+#define CAPSLOCK_PORT (1 << 1) // 1st pin
+#define BACKLIGHT_PORT (1 << 4) // 4th pin
+//#define SCROLLLOCK_PORT (1 << 6) // 6th pin
+
+#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+ // turn on
+ DDRD |= NUMLOCK_PORT;
+ PORTD |= NUMLOCK_PORT;
+ } else {
+ // turn off
+ DDRD &= ~NUMLOCK_PORT;
+ PORTD &= ~NUMLOCK_PORT;
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRD |= CAPSLOCK_PORT;
+ PORTD |= CAPSLOCK_PORT;
+ } else {
+ DDRD &= ~CAPSLOCK_PORT;
+ PORTD &= ~CAPSLOCK_PORT;
+ }
+
+ /* YMD96 does not have scroll lock led
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+ DDRD |= SCROLLLOCK_PORT;
+ PORTD |= SCROLLLOCK_PORT;
+ } else {
+ DDRD &= ~SCROLLLOCK_PORT;
+ PORTD &= ~SCROLLLOCK_PORT;
+ }*/
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+ // default 8 bit mode
+ TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+ TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+ // clear output compare value A
+ // outb(OCR1AH, 0);
+ // outb(OCR1AL, 0);
+
+ // clear output comparator registers for B
+ OCR1BH = 0; // outb(OCR1BH, 0);
+ OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+ // timer1SetPrescaler(TIMER1PRESCALE)
+ // set to DIV/64
+ (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+ // reset TCNT1
+ TCNT1H = 0; // outb(TCNT1H, 0);
+ TCNT1L = 0; // outb(TCNT1L, 0);
+
+ // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+ TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+ is_init = true;
+}
+
+void timer1UnInit(void) {
+ // set prescaler back to NONE
+ (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
+
+ // disable timer overflow interrupt
+ TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+ setPWM(0);
+
+ is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+ // sei();
+ // handle breathing here
+ #ifdef BACKLIGHT_BREATHING
+ if (is_breathing()) {
+ custom_breathing_handler();
+ }
+ #endif
+
+ // TODO call user defined function
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+ // turn on channel B (OC1B) PWM output
+ // set OC1B as non-inverted PWM
+ TCCR1A |= _BV(COM1B1);
+ TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+ TCCR1A &= ~_BV(COM1B1);
+ TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+ DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
+ PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+ // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
+ PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
+}
+
+void startPWM(void) {
+ timer1Init();
+ timer1PWMBEnable();
+ enableBacklight();
+}
+
+void stopPWM(void) {
+ timer1UnInit();
+ disableBacklight();
+ timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+ /* turn backlight on/off depending on user preference */
+ #if BACKLIGHT_ON_STATE == 0
+ // DDRx register: sets the direction of Port D
+ // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
+ PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
+ #else
+ DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
+ PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
+ #endif
+
+ timer1PWMSetup();
+ startPWM();
+
+ #ifdef BACKLIGHT_BREATHING
+ breathing_enable();
+ #endif
+}
+
+void b_led_set(uint8_t level) {
+ if (level > BACKLIGHT_LEVELS) {
+ level = BACKLIGHT_LEVELS;
+ }
+
+ setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+ // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+ if (xValue > TIMER_TOP) {
+ xValue = TIMER_TOP;
+ }
+ OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif // BACKLIGHT_ENABLE
--- /dev/null
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifndef BACKLIGHT_CUSTOM_H
+#define BACKLIGHT_CUSTOM_H
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+
+#endif // BACKLIGHT_CUSTOM_H
--- /dev/null
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT 0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON 2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+ return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+ if (v <= 5243) // if below 8% of max
+ return v / 9; // same as dividing by 900%
+ else {
+ uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+ // to get a useful result with integer division, we shift left in the expression above
+ // and revert what we've done again after squaring.
+ y = y * y * y >> 8;
+ if (y > 0xFFFFUL) // prevent overflow
+ return 0xFFFFU;
+ else
+ return (uint16_t) y;
+ }
+}
+
+void breathing_enable(void) {
+ breathing = true;
+ breathing_counter = 0;
+ breathing_halt = BREATHING_NO_HALT;
+ // interrupt already registered
+}
+
+void breathing_pulse(void) {
+ if (get_backlight_level() == 0)
+ breathing_min();
+ else
+ breathing_max();
+ breathing_halt = BREATHING_HALT_ON;
+ // breathing_interrupt_enable();
+ breathing = true;
+}
+
+void breathing_disable(void) {
+ breathing = false;
+ // backlight_set(get_backlight_level());
+ b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+ if (get_backlight_level() == 0)
+ breathing_halt = BREATHING_HALT_OFF;
+ else
+ breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+ if (is_breathing())
+ breathing_disable();
+ else
+ breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+ if (!value)
+ value = 1;
+ breathing_period = value;
+}
+
+void breathing_period_default(void) {
+ breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+ breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+ breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+ return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+ uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+ // resetting after one period to prevent ugly reset at overflow.
+ breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+ uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+ if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+ ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+ {
+ // breathing_interrupt_disable();
+ }
+
+ setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif // BACKLIGHT_ENABLE
/*
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
-
+Modified 2018 Harshit Goel <Harshitgoel96@yahoo.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include "config_common.h"
+
#ifndef CONFIG_H
#define CONFIG_H
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
-#define DIODE_DIRECTION ROW2COL
+//#define DIODE_DIRECTION ROW2COL
+
+//#define RGB_DI_PIN C4
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 12
+// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work
+
+#define TAPPING_TOGGLE 3
+
+#define NO_UART 1
-#define RGB_DI_PIN C4
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
#define RGBLED_NUM 18
+#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
#define RGBLIGHT_ANIMATIONS
-#define RGBLIGHT_VAL_STEP 20
+/*#define RGBLIGHT_VAL_STEP 20
#define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
+#define BOOTLOADHID_BOOTLOADER 1*/
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
#define _DEFLT 0
#define _RAISE 1
+#define KEYMAP KEYMAP_DEFAULT
+
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0, default layer
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
+#define TAPPING_TERM 300
+
+#endif
--- /dev/null
+#include "ymd96.h"
+#include "action_layer.h"
+
+/*
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2*/
+/*
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+};*/
+
+void matrix_scan_user(void) {
+ // runs at every matrix scan.
+}
+
+enum {
+ TD_H_E = 0
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [TD_H_E] = ACTION_TAP_DANCE_DOUBLE(KC_HOME, KC_END)
+};
+#define ______ KC_TRNS
+#define _DEFLT 0
+#define _RAISE 1
+
+#define KEYMAP KEYMAP_CUSTOM
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Layer 0, default layer
+ * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |Print | Home | End |Insert|Delete| PgUp | 19 keys
+ * | ~` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BkSpc |NumLck| / | * | PgDn | 18 keys
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | { | } | \ | 7 | 8 | 9 | - | 18 keys
+ * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Return | 4 | 5 | 6 | + | 17 keys
+ * | LShft | Z | X | C | V | B | N | M | , | . | / | RShft | 1 | 2 | 3 | En | 16 keys
+ * | Ctrl | Win | Alt | Space | Fn | Win | Left | Down | Up | Right| 0 | . | | 12 keys
+ */
+
+ [_DEFLT] = KEYMAP(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_INSERT, KC_DELETE, KC_PGUP, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_NO, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, KC_PENT, \
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RGUI , KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, MO(_RAISE), KC_P0, KC_PDOT \
+ ),
+ /* Layer 1, raise layer
+ * | | | | | | | | | | | | | | | | | | | |
+ * | | | | | | | | | | | | | | | | | | |
+ * | | |rgb_up|rgb_dn|rgb_mo| | | | | | F22 | F23 | F24 | | | | | |
+ * | | | | | | | | | | | | | | | | | |
+ * | | | | | | | | | VolDn| VolUp| Mute | Play/Pause | | | | |
+ * | | | | | | |MPrev | | | MNext| | | |
+ */
+ [_RAISE] = KEYMAP(
+ RESET,RGB_TOG, BL_TOGG, BL_STEP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, BL_INC, BL_DEC, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_F22, KC_F23, KC_F24, ______, ______, ______, ______, ______, \
+ ______, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MODE_FORWARD , ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, RGB_HUD, RGB_SAD, RGB_VAD, ______, ______, ______, ______, KC_VOLD,KC_VOLU, KC_MUTE, KC_MPLY, ______, ______, ______, ______, \
+ ______, ______, BL_OFF, BL_ON, ______, ______, ______, ______, ______, ______, ______, ______ \
+ )
+};
--- /dev/null
+# Harshit
+Modified the layout according to me. Full 2u NumPad 0, 5 * 1u modifiers on right of space. Split right shift.
\ No newline at end of file
--- /dev/null
+TAP_DANCE_ENABLE = yes
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
void matrix_init(void) {
// all outputs for rows high
DDRB = 0xFF;
matrix[row] = 0x00;
matrix_debouncing[row] = 0x00;
}
-}
+/*}
+ matrix_init_quantum(); // missing from original port by Luiz
void matrix_set_row_status(uint8_t row) {
DDRB = (1 << row);
PORTB = ~(1 << row);
-}
+}*/
-uint8_t bit_reverse(uint8_t x) {
+
+/*uint8_t bit_reverse(uint8_t x) {
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
- return x;
+ return x;*/
}
uint8_t matrix_scan(void) {
}
}
- matrix_scan_user();
+ matrix_scan_quantum(); // also missing in original PS2AVRGB implementation
return 1;
}
+// declarations
+void matrix_set_row_status(uint8_t row) {
+ DDRB = (1 << row);
+ PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+ x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+ x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+ x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+ return x;
+}
+
inline matrix_row_t matrix_get_row(uint8_t row) {
return matrix[row];
}
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
+# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = atmel-dfu
+BOOTLOADER = bootloadHID
# build options
-BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = yes
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
+CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
+
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = yes
+
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
+KEY_LOCK_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c i2c.c backlight.c
# programming options
-PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
--- /dev/null
+# JJ40 Tools
+
+## usb_detach.c
+
+When trying to flash on Linux, you may encounter a "Resource Unavailable" error. This means that Linux's HID driver has taken exclusive control of the keyboard, and the program script can't flash it.
+This program can force Linux to give up a device, so that the programming script can reset it.
+
+### To compile:
+```
+gcc usb_detach.c -o usb_detach
+```
+
+### To run:
+1. Use `lsusb` to discover the Bus and Device numbers for your keyboard.
+2. Run the program: `sudo ./usb_detach /dev/bus/usb/<BUS>/<DEVICE>`.
+3. Build and program the firmware as normal.
--- /dev/null
+/* Found at https://www.linuxquestions.org/questions/linux-hardware-18/how-to-unclaim-usb-device-558138/#post3406986 */
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <linux/ioctl.h>
+#include <linux/usbdevice_fs.h>
+
+int main(int argc, char**argv)
+{
+ struct usbdevfs_ioctl command;
+ int ret;
+ int fd;
+ int i;
+ if (argc>1) {
+ fd = open(argv[1],O_RDWR);
+ if (fd<1){
+ perror("unable to open file");
+ return 1;
+ }
+ for (i=0;i<255;i++){ // hack: should fetch how many interface there is.
+ command.ifno = i;
+ command.ioctl_code = USBDEVFS_DISCONNECT;
+ command.data = NULL;
+ ret = ioctl(fd, USBDEVFS_IOCTL, &command);
+ if(ret!=-1)
+ printf("un claimed interface %d %d\n",i,ret);
+ }
+ } else {
+ printf ("usage: %s /dev/bus/usb/BUS/DEVICE\n",argv[0]);
+ printf("Release all interfaces of this usb device for usage in virtualisation\n");
+ }
+}
\ No newline at end of file
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus.
*/
-#define USB_CFG_MAX_BUS_POWER 500
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2018 Kenneth A. <github.com/krusli>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
*/
#include "ymd96.h"
-#include "rgblight.h"
#include <avr/pgmspace.h>
#include "action_layer.h"
-#include "i2c.h"
#include "quantum.h"
+#include "i2c.h"
+
+#include "backlight.h"
+#include "backlight_custom.h"
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+ // call user level keymaps, if any
+ matrix_init_user();
+}
+
+#ifdef BACKLIGHT_ENABLE
+/// Overrides functions in `quantum.c`
+void backlight_init_ports(void) {
+ b_led_init_ports();
+}
+
+void backlight_task(void) {
+ b_led_task();
+}
+
+void backlight_set(uint8_t level) {
+ b_led_set(level);
+}
+#endif
+
+#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
+// custom RGB driver
void rgblight_set(void) {
- if (!rgblight_config.enable) {
- for (uint8_t i = 0; i < RGBLED_NUM; i++) {
- led[i].r = 0;
- led[i].g = 0;
- led[i].b = 0;
- }
+ if (!rgblight_config.enable) {
+ for (uint8_t i=0; i<RGBLED_NUM; i++) {
+ led[i].r = 0;
+ led[i].g = 0;
+ led[i].b = 0;
}
+ }
+
+ i2c_init();
+ i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+ // if LEDs were previously on before poweroff, turn them back on
+ if (rgb_init == false && rgblight_config.enable) {
i2c_init();
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+ rgb_init = true;
+ }
+
+ rgblight_task();
+#else
+void matrix_scan_kb(void) {
+#endif
+ matrix_scan_user();
+ /* Nothing else for now. */
}
-__attribute__ ((weak))
+__attribute__((weak)) // overridable
+void matrix_init_user(void) {
+
+}
+
+
+__attribute__((weak)) // overridable
void matrix_scan_user(void) {
- rgblight_task();
+
}
/*
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
-
+Modified 2018 harshit goel
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
+#include "quantum.h"
#include "quantum_keycodes.h"
#include "keycode.h"
#include "action.h"
-#define KEYMAP( \
+void matrix_init_user(void); // TODO port this to other PS2AVRGB boards
+
+#define KEYMAP_DEFAULT( \
K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \
K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \
{ K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \
}
+#define KEYMAP_CUSTOM( \
+ K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
+ K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \
+ K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \
+ K200, K201, K202, K203, K204, K205, K603, K613, K713, K703, K210, K211, K213, K206, K207, K208, K209, \
+ K100, K101, K102, K103, K104, K105, K604, K614, K714, K704, K110, K111, K106, K107, K108, K009, \
+ K000, K001, K002, K605, K705, K010, K011, K606, K607, KC_NO, K006, K008 \
+) { \
+ { K000, K001, K002, KC_NO, KC_NO, KC_NO, K006, KC_NO, K008, K009, K010, K011, KC_NO, K013, KC_NO, }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, KC_NO, K110, K111, KC_NO, K113, KC_NO, }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214, }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K414, }, \
+ { K500, KC_NO, K502, K503, K504, K505, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, }, \
+ { K600, K601, K602, K603, K604, K605, K606, K607, KC_NO, KC_NO, K610, K611, K612, K613, K614, }, \
+ { K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \
+}
+
#define LAYOUT_jj50( \
K011, K010, K009, K008, K004, K005, K006, K007, K003, K002, K201, K000, \
K111, K110, K109, K108, K104, K105, K106, K107, K103, K102, K001, K100, \
#endif
-
-
-
-
-
-
-
-
-
projects / qmk_firmware.git / commitdiff