--- /dev/null
+SUBPROJECT_DEFAULT = stm32_f072_onekey
+
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE ?= yes # Mouse keys
+EXTRAKEY_ENABLE ?= yes # Audio control and System control
+CONSOLE_ENABLE ?= yes # Console for debug
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
+
+ifndef QUANTUM_DIR
+ include ../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+#include "chibios_test.h"
--- /dev/null
+#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_
+#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_
+
+#include "quantum.h"
+
+#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */
--- /dev/null
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6464
+#define DEVICE_VER 0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/* at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "QMK"
+#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00'
+#define PRODUCT "ChibiOS QMK test"
+#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'Q', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00'
+#define DESCRIPTION "QMK keyboard firmware test for ChibiOS"
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "chibios_test.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ {{KC_CAPS}}, // test with KC_CAPS, KC_A, KC_BTLD
+};
+
+const uint16_t fn_actions[] = {
+};
--- /dev/null
+# project specific files
+SRC = matrix.c \
+ led.c
+
+## chip/board settings
+# the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+# comment out to disable the options.
+#
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
--- /dev/null
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE FALSE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP FALSE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS FALSE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
--- /dev/null
+#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_
+#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_
+
+#include "../config.h"
+
+
+#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ (void)usb_led;
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // output high
+ palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(GPIOC, GPIOC_LED_GREEN);
+ } else {
+ // Hi-Z
+ palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_INPUT);
+ }
+}
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * scan matrix
+ */
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "wait.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+#define LED_ON() do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0)
+#define LED_OFF() do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0)
+#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0)
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ //debug
+ debug_matrix = true;
+ LED_ON();
+ wait_ms(500);
+ LED_OFF();
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ wait_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ wait_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+/* Column pin configuration
+ */
+static void init_cols(void)
+{
+ // don't need pullup/down, since it's pulled down in hardware
+ palSetPadMode(GPIOA, GPIOA_BUTTON, PAL_MODE_INPUT);
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+ return ((palReadPad(GPIOA, GPIOA_BUTTON)==PAL_LOW) ? 0 : (1<<0));
+ // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
+}
+
+/* Row pin configuration
+ */
+static void unselect_rows(void)
+{
+ // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
+}
+
+static void select_row(uint8_t row)
+{
+ (void)row;
+ // Output low to select
+ // switch (row) {
+ // case 0:
+ // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
+ // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
+ // break;
+ // }
+}
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+#ifndef _MCUCONF_H_\r
+#define _MCUCONF_H_\r
+\r
+/*\r
+ * STM32F0xx drivers configuration.\r
+ * The following settings override the default settings present in\r
+ * the various device driver implementation headers.\r
+ * Note that the settings for each driver only have effect if the whole\r
+ * driver is enabled in halconf.h.\r
+ *\r
+ * IRQ priorities:\r
+ * 3...0 Lowest...Highest.\r
+ *\r
+ * DMA priorities:\r
+ * 0...3 Lowest...Highest.\r
+ */\r
+\r
+#define STM32F0xx_MCUCONF\r
+\r
+/*\r
+ * HAL driver system settings.\r
+ */\r
+#define STM32_NO_INIT FALSE\r
+#define STM32_PVD_ENABLE FALSE\r
+#define STM32_PLS STM32_PLS_LEV0\r
+#define STM32_HSI_ENABLED TRUE\r
+#define STM32_HSI14_ENABLED TRUE\r
+#define STM32_HSI48_ENABLED FALSE\r
+#define STM32_LSI_ENABLED TRUE\r
+#define STM32_HSE_ENABLED FALSE\r
+#define STM32_LSE_ENABLED FALSE\r
+#define STM32_SW STM32_SW_PLL\r
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2\r
+#define STM32_PREDIV_VALUE 1\r
+#define STM32_PLLMUL_VALUE 12\r
+#define STM32_HPRE STM32_HPRE_DIV1\r
+#define STM32_PPRE STM32_PPRE_DIV1\r
+#define STM32_ADCSW STM32_ADCSW_HSI14\r
+#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
+#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
+#define STM32_ADCSW STM32_ADCSW_HSI14\r
+#define STM32_USBSW STM32_USBSW_HSI48\r
+#define STM32_CECSW STM32_CECSW_HSI\r
+#define STM32_I2C1SW STM32_I2C1SW_HSI\r
+#define STM32_USART1SW STM32_USART1SW_PCLK\r
+#define STM32_RTCSEL STM32_RTCSEL_LSI\r
+\r
+/*\r
+ * ADC driver system settings.\r
+ */\r
+#define STM32_ADC_USE_ADC1 FALSE\r
+#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
+#define STM32_ADC_IRQ_PRIORITY 2\r
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2\r
+\r
+/*\r
+ * EXT driver system settings.\r
+ */\r
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3\r
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3\r
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3\r
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3\r
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3\r
+\r
+/*\r
+ * GPT driver system settings.\r
+ */\r
+#define STM32_GPT_USE_TIM1 FALSE\r
+#define STM32_GPT_USE_TIM2 FALSE\r
+#define STM32_GPT_USE_TIM3 FALSE\r
+#define STM32_GPT_USE_TIM14 FALSE\r
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2\r
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2\r
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2\r
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2\r
+\r
+/*\r
+ * I2C driver system settings.\r
+ */\r
+#define STM32_I2C_USE_I2C1 FALSE\r
+#define STM32_I2C_USE_I2C2 FALSE\r
+#define STM32_I2C_BUSY_TIMEOUT 50\r
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3\r
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3\r
+#define STM32_I2C_USE_DMA TRUE\r
+#define STM32_I2C_I2C1_DMA_PRIORITY 1\r
+#define STM32_I2C_I2C2_DMA_PRIORITY 1\r
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
+\r
+/*\r
+ * ICU driver system settings.\r
+ */\r
+#define STM32_ICU_USE_TIM1 FALSE\r
+#define STM32_ICU_USE_TIM2 FALSE\r
+#define STM32_ICU_USE_TIM3 FALSE\r
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3\r
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3\r
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3\r
+\r
+/*\r
+ * PWM driver system settings.\r
+ */\r
+#define STM32_PWM_USE_ADVANCED FALSE\r
+#define STM32_PWM_USE_TIM1 FALSE\r
+#define STM32_PWM_USE_TIM2 FALSE\r
+#define STM32_PWM_USE_TIM3 FALSE\r
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3\r
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3\r
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3\r
+\r
+/*\r
+ * SERIAL driver system settings.\r
+ */\r
+#define STM32_SERIAL_USE_USART1 FALSE\r
+#define STM32_SERIAL_USE_USART2 FALSE\r
+#define STM32_SERIAL_USART1_PRIORITY 3\r
+#define STM32_SERIAL_USART2_PRIORITY 3\r
+\r
+/*\r
+ * SPI driver system settings.\r
+ */\r
+#define STM32_SPI_USE_SPI1 FALSE\r
+#define STM32_SPI_USE_SPI2 FALSE\r
+#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
+#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2\r
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2\r
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
+\r
+/*\r
+ * ST driver system settings.\r
+ */\r
+#define STM32_ST_IRQ_PRIORITY 2\r
+#define STM32_ST_USE_TIMER 2\r
+\r
+/*\r
+ * UART driver system settings.\r
+ */\r
+#define STM32_UART_USE_USART1 FALSE\r
+#define STM32_UART_USE_USART2 FALSE\r
+#define STM32_UART_USART1_IRQ_PRIORITY 3\r
+#define STM32_UART_USART2_IRQ_PRIORITY 3\r
+#define STM32_UART_USART1_DMA_PRIORITY 0\r
+#define STM32_UART_USART2_DMA_PRIORITY 0\r
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
+\r
+/*\r
+ * USB driver system settings.\r
+ */\r
+#define STM32_USB_USE_USB1 TRUE\r
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3\r
+\r
+#endif /* _MCUCONF_H_ */\r
--- /dev/null
+#include "stm32_f072_onekey.h"
--- /dev/null
+#ifndef STM32_F072_ONEKEY_H
+#define STM32_F072_ONEKEY_H
+#include "chibios_test.h"
+#endif
+
--- /dev/null
+# project specific files
+SRC = matrix.c \
+ led.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+# MAPLE MINI
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
+# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
+# BOARD = MAPLEMINI_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+#include "hal.h"\r
+\r
+/**\r
+ * @brief PAL setup.\r
+ * @details Digital I/O ports static configuration as defined in @p board.h.\r
+ * This variable is used by the HAL when initializing the PAL driver.\r
+ */\r
+#if HAL_USE_PAL || defined(__DOXYGEN__)\r
+const PALConfig pal_default_config =\r
+{\r
+ {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},\r
+ {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},\r
+ {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},\r
+ {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},\r
+ {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},\r
+};\r
+#endif\r
+\r
+/*\r
+ * Early initialization code.\r
+ * This initialization must be performed just after stack setup and before\r
+ * any other initialization.\r
+ */\r
+void __early_init(void) {\r
+\r
+ stm32_clock_init();\r
+}\r
+\r
+/*\r
+ * Board-specific initialization code.\r
+ */\r
+void boardInit(void) {\r
+}\r
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+#ifndef _BOARD_H_\r
+#define _BOARD_H_\r
+\r
+/*\r
+ * Setup for a Generic STM32F103 board.\r
+ */\r
+\r
+/*\r
+ * Board identifier.\r
+ */\r
+#define BOARD_GENERIC_STM32_F103\r
+#define BOARD_NAME "Generic STM32F103x board"\r
+\r
+/*\r
+ * Board frequencies.\r
+ */\r
+#define STM32_LSECLK 32768\r
+#define STM32_HSECLK 8000000\r
+\r
+/*\r
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.\r
+ */\r
+#define STM32F103xB\r
+\r
+/*\r
+ * IO pins assignments\r
+ */\r
+\r
+/* on-board */\r
+\r
+#define GPIOC_LED 13\r
+#define GPIOD_OSC_IN 0\r
+#define GPIOD_OSC_OUT 1\r
+\r
+/* In case your board has a "USB enable" hardware\r
+ controlled by a pin, define it here. (It could be just\r
+ a 1.5k resistor connected to D+ line.)\r
+*/\r
+/*\r
+#define GPIOB_USB_DISC 10\r
+*/\r
+\r
+/*\r
+ * I/O ports initial setup, this configuration is established soon after reset\r
+ * in the initialization code.\r
+ *\r
+ * The digits have the following meaning:\r
+ * 0 - Analog input.\r
+ * 1 - Push Pull output 10MHz.\r
+ * 2 - Push Pull output 2MHz.\r
+ * 3 - Push Pull output 50MHz.\r
+ * 4 - Digital input.\r
+ * 5 - Open Drain output 10MHz.\r
+ * 6 - Open Drain output 2MHz.\r
+ * 7 - Open Drain output 50MHz.\r
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.\r
+ * 9 - Alternate Push Pull output 10MHz.\r
+ * A - Alternate Push Pull output 2MHz.\r
+ * B - Alternate Push Pull output 50MHz.\r
+ * C - Reserved.\r
+ * D - Alternate Open Drain output 10MHz.\r
+ * E - Alternate Open Drain output 2MHz.\r
+ * F - Alternate Open Drain output 50MHz.\r
+ * Please refer to the STM32 Reference Manual for details.\r
+ */\r
+\r
+/*\r
+ * Port A setup.\r
+ * Everything input with pull-up except:\r
+ * PA2 - Alternate output (USART2 TX).\r
+ * PA3 - Normal input (USART2 RX).\r
+ * PA9 - Alternate output (USART1 TX).\r
+ * PA10 - Normal input (USART1 RX).\r
+ */\r
+#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */\r
+#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */\r
+#define VAL_GPIOAODR 0xFFFFFFFF\r
+\r
+/*\r
+ * Port B setup.\r
+ * Everything input with pull-up except:\r
+ * PB10 - Push Pull output (USB switch).\r
+ */\r
+#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */\r
+#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */\r
+#define VAL_GPIOBODR 0xFFFFFFFF\r
+\r
+/*\r
+ * Port C setup.\r
+ * Everything input with pull-up except:\r
+ * PC13 - Push Pull output (LED).\r
+ */\r
+#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */\r
+#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */\r
+#define VAL_GPIOCODR 0xFFFFFFFF\r
+\r
+/*\r
+ * Port D setup.\r
+ * Everything input with pull-up except:\r
+ * PD0 - Normal input (XTAL).\r
+ * PD1 - Normal input (XTAL).\r
+ */\r
+#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */\r
+#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */\r
+#define VAL_GPIODODR 0xFFFFFFFF\r
+\r
+/*\r
+ * Port E setup.\r
+ * Everything input with pull-up except:\r
+ */\r
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */\r
+#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */\r
+#define VAL_GPIOEODR 0xFFFFFFFF\r
+\r
+/*\r
+ * USB bus activation macro, required by the USB driver.\r
+ */\r
+/* The point is that most of the generic STM32F103* boards\r
+ have a 1.5k resistor connected on one end to the D+ line\r
+ and on the other end to some pin. Or even a slightly more\r
+ complicated "USB enable" circuit, controlled by a pin.\r
+ That should go here.\r
+\r
+ However on some boards (e.g. one that I have), there's no\r
+ such hardware. In which case it's better to not do anything.\r
+*/\r
+/*\r
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)\r
+*/\r
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);\r
+\r
+/*\r
+ * USB bus de-activation macro, required by the USB driver.\r
+ */\r
+/*\r
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)\r
+*/\r
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);\r
+\r
+#if !defined(_FROM_ASM_)\r
+#ifdef __cplusplus\r
+extern "C" {\r
+#endif\r
+ void boardInit(void);\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+#endif /* _FROM_ASM_ */\r
+\r
+#endif /* _BOARD_H_ */\r
--- /dev/null
+# List of all the board related files.\r
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c\r
+\r
+# Required include directories\r
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103\r
--- /dev/null
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+// so setting anything here does not make much sense
+// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 16
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 2000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS FALSE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
--- /dev/null
+#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_
+#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_
+
+#include "../config.h"
+
+#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */
--- /dev/null
+#!/bin/bash
+Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+/*\r
+ * ST32F103xB memory setup for use with the maplemini bootloader.\r
+ * You will have to\r
+ * #define CORTEX_VTOR_INIT 0x5000\r
+ * in your projects chconf.h\r
+ */\r
+MEMORY\r
+{\r
+ flash0 : org = 0x08002000, len = 128k - 0x2000\r
+ flash1 : org = 0x00000000, len = 0\r
+ flash2 : org = 0x00000000, len = 0\r
+ flash3 : org = 0x00000000, len = 0\r
+ flash4 : org = 0x00000000, len = 0\r
+ flash5 : org = 0x00000000, len = 0\r
+ flash6 : org = 0x00000000, len = 0\r
+ flash7 : org = 0x00000000, len = 0\r
+ ram0 : org = 0x20000000, len = 20k\r
+ ram1 : org = 0x00000000, len = 0\r
+ ram2 : org = 0x00000000, len = 0\r
+ ram3 : org = 0x00000000, len = 0\r
+ ram4 : org = 0x00000000, len = 0\r
+ ram5 : org = 0x00000000, len = 0\r
+ ram6 : org = 0x00000000, len = 0\r
+ ram7 : org = 0x00000000, len = 0\r
+}\r
+\r
+/* For each data/text section two region are defined, a virtual region\r
+ and a load region (_LMA suffix).*/\r
+\r
+/* Flash region to be used for exception vectors.*/\r
+REGION_ALIAS("VECTORS_FLASH", flash0);\r
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);\r
+\r
+/* Flash region to be used for constructors and destructors.*/\r
+REGION_ALIAS("XTORS_FLASH", flash0);\r
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);\r
+\r
+/* Flash region to be used for code text.*/\r
+REGION_ALIAS("TEXT_FLASH", flash0);\r
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);\r
+\r
+/* Flash region to be used for read only data.*/\r
+REGION_ALIAS("RODATA_FLASH", flash0);\r
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);\r
+\r
+/* Flash region to be used for various.*/\r
+REGION_ALIAS("VARIOUS_FLASH", flash0);\r
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);\r
+\r
+/* Flash region to be used for RAM(n) initialization data.*/\r
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);\r
+\r
+/* RAM region to be used for Main stack. This stack accommodates the processing\r
+ of all exceptions and interrupts.*/\r
+REGION_ALIAS("MAIN_STACK_RAM", ram0);\r
+\r
+/* RAM region to be used for the process stack. This is the stack used by\r
+ the main() function.*/\r
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);\r
+\r
+/* RAM region to be used for data segment.*/\r
+REGION_ALIAS("DATA_RAM", ram0);\r
+REGION_ALIAS("DATA_RAM_LMA", flash0);\r
+\r
+/* RAM region to be used for BSS segment.*/\r
+REGION_ALIAS("BSS_RAM", ram0);\r
+\r
+/* RAM region to be used for the default heap.*/\r
+REGION_ALIAS("HEAP_RAM", ram0);\r
+\r
+/* Generic rules inclusion.*/\r
+INCLUDE rules.ld\r
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ /* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
+ palClearPad(GPIOC, 13);
+#endif
+ /* Maple Mini */
+#ifdef BOARD_MAPLEMINI_STM32_F103
+ palSetPad(GPIOB, 1);
+#endif
+ } else {
+ /* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
+ palSetPad(GPIOC, 13);
+#endif
+ /* Maple Mini */
+#ifdef BOARD_MAPLEMINI_STM32_F103
+ palClearPad(GPIOB,1);
+#endif
+ }
+}
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * scan matrix
+ */
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "wait.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+/* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
+#define LED_ON() do { palClearPad(GPIOC, GPIOC_LED) ;} while (0)
+#define LED_OFF() do { palSetPad(GPIOC, GPIOC_LED); } while (0)
+#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED); } while (0)
+#endif
+
+/* Maple Mini */
+#ifdef BOARD_MAPLEMINI_STM32_F103
+#define LED_ON() do { palSetPad(GPIOB, 1) ;} while (0)
+#define LED_OFF() do { palClearPad(GPIOB, 1); } while (0)
+#define LED_TGL() do { palTogglePad(GPIOB, 1); } while (0)
+#endif
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ //debug
+ debug_matrix = true;
+ LED_ON();
+ wait_ms(500);
+ LED_OFF();
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ wait_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ wait_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+/* Column pin configuration
+ */
+static void init_cols(void)
+{
+#ifdef BOARD_MAPLEMINI_STM32_F103
+ // don't need pullup/down, since it's pulled down in hardware
+ palSetPadMode(GPIOB, 8, PAL_MODE_INPUT);
+#else
+ palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
+#endif
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+ return ((palReadPad(GPIOB, 8)==PAL_LOW) ? 0 : (1<<0));
+ // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
+}
+
+/* Row pin configuration
+ */
+static void unselect_rows(void)
+{
+ // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
+}
+
+static void select_row(uint8_t row)
+{
+ (void)row;
+ // Output low to select
+ // switch (row) {
+ // case 0:
+ // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
+ // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
+ // break;
+ // }
+}
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+#ifndef _MCUCONF_H_\r
+#define _MCUCONF_H_\r
+\r
+#define STM32F103_MCUCONF\r
+\r
+/*\r
+ * STM32F103 drivers configuration.\r
+ * The following settings override the default settings present in\r
+ * the various device driver implementation headers.\r
+ * Note that the settings for each driver only have effect if the whole\r
+ * driver is enabled in halconf.h.\r
+ *\r
+ * IRQ priorities:\r
+ * 15...0 Lowest...Highest.\r
+ *\r
+ * DMA priorities:\r
+ * 0...3 Lowest...Highest.\r
+ */\r
+\r
+/*\r
+ * HAL driver system settings.\r
+ */\r
+#define STM32_NO_INIT FALSE\r
+#define STM32_HSI_ENABLED TRUE\r
+#define STM32_LSI_ENABLED FALSE\r
+#define STM32_HSE_ENABLED TRUE\r
+#define STM32_LSE_ENABLED FALSE\r
+#define STM32_SW STM32_SW_PLL\r
+#define STM32_PLLSRC STM32_PLLSRC_HSE\r
+#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1\r
+#define STM32_PLLMUL_VALUE 9\r
+#define STM32_HPRE STM32_HPRE_DIV1\r
+#define STM32_PPRE1 STM32_PPRE1_DIV2\r
+#define STM32_PPRE2 STM32_PPRE2_DIV2\r
+#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
+#define STM32_USB_CLOCK_REQUIRED TRUE\r
+#define STM32_USBPRE STM32_USBPRE_DIV1P5\r
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
+#define STM32_RTCSEL STM32_RTCSEL_HSEDIV\r
+#define STM32_PVD_ENABLE FALSE\r
+#define STM32_PLS STM32_PLS_LEV0\r
+\r
+/*\r
+ * ADC driver system settings.\r
+ */\r
+#define STM32_ADC_USE_ADC1 FALSE\r
+#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
+#define STM32_ADC_ADC1_IRQ_PRIORITY 6\r
+\r
+/*\r
+ * CAN driver system settings.\r
+ */\r
+#define STM32_CAN_USE_CAN1 FALSE\r
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11\r
+\r
+/*\r
+ * EXT driver system settings.\r
+ */\r
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6\r
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6\r
+\r
+/*\r
+ * GPT driver system settings.\r
+ */\r
+#define STM32_GPT_USE_TIM1 FALSE\r
+#define STM32_GPT_USE_TIM2 FALSE\r
+#define STM32_GPT_USE_TIM3 FALSE\r
+#define STM32_GPT_USE_TIM4 FALSE\r
+#define STM32_GPT_USE_TIM5 FALSE\r
+#define STM32_GPT_USE_TIM8 FALSE\r
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7\r
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7\r
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7\r
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7\r
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7\r
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7\r
+\r
+/*\r
+ * I2C driver system settings.\r
+ */\r
+#define STM32_I2C_USE_I2C1 FALSE\r
+#define STM32_I2C_USE_I2C2 FALSE\r
+#define STM32_I2C_BUSY_TIMEOUT 50\r
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5\r
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5\r
+#define STM32_I2C_I2C1_DMA_PRIORITY 3\r
+#define STM32_I2C_I2C2_DMA_PRIORITY 3\r
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
+\r
+/*\r
+ * ICU driver system settings.\r
+ */\r
+#define STM32_ICU_USE_TIM1 FALSE\r
+#define STM32_ICU_USE_TIM2 FALSE\r
+#define STM32_ICU_USE_TIM3 FALSE\r
+#define STM32_ICU_USE_TIM4 FALSE\r
+#define STM32_ICU_USE_TIM5 FALSE\r
+#define STM32_ICU_USE_TIM8 FALSE\r
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7\r
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7\r
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7\r
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7\r
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7\r
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7\r
+\r
+/*\r
+ * PWM driver system settings.\r
+ */\r
+#define STM32_PWM_USE_ADVANCED FALSE\r
+#define STM32_PWM_USE_TIM1 FALSE\r
+#define STM32_PWM_USE_TIM2 FALSE\r
+#define STM32_PWM_USE_TIM3 FALSE\r
+#define STM32_PWM_USE_TIM4 FALSE\r
+#define STM32_PWM_USE_TIM5 FALSE\r
+#define STM32_PWM_USE_TIM8 FALSE\r
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7\r
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7\r
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7\r
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7\r
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7\r
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7\r
+\r
+/*\r
+ * RTC driver system settings.\r
+ */\r
+#define STM32_RTC_IRQ_PRIORITY 15\r
+\r
+/*\r
+ * SERIAL driver system settings.\r
+ */\r
+#define STM32_SERIAL_USE_USART1 FALSE\r
+#define STM32_SERIAL_USE_USART2 FALSE\r
+#define STM32_SERIAL_USE_USART3 FALSE\r
+#define STM32_SERIAL_USE_UART4 FALSE\r
+#define STM32_SERIAL_USE_UART5 FALSE\r
+#define STM32_SERIAL_USART1_PRIORITY 12\r
+#define STM32_SERIAL_USART2_PRIORITY 12\r
+#define STM32_SERIAL_USART3_PRIORITY 12\r
+#define STM32_SERIAL_UART4_PRIORITY 12\r
+#define STM32_SERIAL_UART5_PRIORITY 12\r
+\r
+/*\r
+ * SPI driver system settings.\r
+ */\r
+#define STM32_SPI_USE_SPI1 FALSE\r
+#define STM32_SPI_USE_SPI2 FALSE\r
+#define STM32_SPI_USE_SPI3 FALSE\r
+#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
+#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
+#define STM32_SPI_SPI3_DMA_PRIORITY 1\r
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10\r
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10\r
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10\r
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
+\r
+/*\r
+ * ST driver system settings.\r
+ */\r
+#define STM32_ST_IRQ_PRIORITY 8\r
+#define STM32_ST_USE_TIMER 2\r
+\r
+/*\r
+ * UART driver system settings.\r
+ */\r
+#define STM32_UART_USE_USART1 FALSE\r
+#define STM32_UART_USE_USART2 FALSE\r
+#define STM32_UART_USE_USART3 FALSE\r
+#define STM32_UART_USART1_IRQ_PRIORITY 12\r
+#define STM32_UART_USART2_IRQ_PRIORITY 12\r
+#define STM32_UART_USART3_IRQ_PRIORITY 12\r
+#define STM32_UART_USART1_DMA_PRIORITY 0\r
+#define STM32_UART_USART2_DMA_PRIORITY 0\r
+#define STM32_UART_USART3_DMA_PRIORITY 0\r
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
+\r
+/*\r
+ * USB driver system settings.\r
+ */\r
+#define STM32_USB_USE_USB1 TRUE\r
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13\r
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14\r
+\r
+#endif /* _MCUCONF_H_ */\r
--- /dev/null
+#include "stm32_f103_onekey.h"
--- /dev/null
+#ifndef STM32_F103_ONEKEY_H
+#define STM32_F103_ONEKEY_H
+#include "chibios_test.h"
+#endif
--- /dev/null
+# project specific files
+SRC = matrix.c \
+ led.c
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+# KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = KL2x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+# - MKL26Z64 for Teensy LC
+# - MK20DX128 for Teensy 3.0
+# - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MKL26Z64
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+# - kl2x for Teensy LC
+# - k20x5 for Teensy 3.0
+# - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = kl2x
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# - BOARD =
+# - PJRC_TEENSY_LC for Teensy LC
+# - PJRC_TEENSY_3 for Teensy 3.0
+# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_LC
+
+# Cortex version
+# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
+MCU = cortex-m0plus
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 6
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+# Target file name (without extension).
+PROJECT = ch
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+# KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+# - MKL26Z64 for Teensy LC
+# - MK20DX128 for Teensy 3.0
+# - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MK20DX128
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+# - kl2x for Teensy LC
+# - k20x5 for Teensy 3.0
+# - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x5
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# - BOARD =
+# - PJRC_TEENSY_LC for Teensy LC
+# - PJRC_TEENSY_3 for Teensy 3.0
+# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_3
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk
--- /dev/null
+# Target file name (without extension).
+PROJECT = ch
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+# KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+# - MKL26Z64 for Teensy LC
+# - MK20DX128 for Teensy 3.0
+# - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MK20DX256
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+# - kl2x for Teensy LC
+# - k20x5 for Teensy 3.0
+# - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# - BOARD =
+# - PJRC_TEENSY_LC for Teensy LC
+# - PJRC_TEENSY_3 for Teensy 3.0
+# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+/**\r
+ * @file templates/chconf.h\r
+ * @brief Configuration file template.\r
+ * @details A copy of this file must be placed in each project directory, it\r
+ * contains the application specific kernel settings.\r
+ *\r
+ * @addtogroup config\r
+ * @details Kernel related settings and hooks.\r
+ * @{\r
+ */\r
+\r
+#ifndef CHCONF_H\r
+#define CHCONF_H\r
+\r
+#define _CHIBIOS_RT_CONF_\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name System timers settings\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief System time counter resolution.\r
+ * @note Allowed values are 16 or 32 bits.\r
+ */\r
+#define CH_CFG_ST_RESOLUTION 32\r
+\r
+/**\r
+ * @brief System tick frequency.\r
+ * @details Frequency of the system timer that drives the system ticks. This\r
+ * setting also defines the system tick time unit.\r
+ */\r
+#define CH_CFG_ST_FREQUENCY 1000\r
+\r
+/**\r
+ * @brief Time delta constant for the tick-less mode.\r
+ * @note If this value is zero then the system uses the classic\r
+ * periodic tick. This value represents the minimum number\r
+ * of ticks that is safe to specify in a timeout directive.\r
+ * The value one is not valid, timeouts are rounded up to\r
+ * this value.\r
+ */\r
+#define CH_CFG_ST_TIMEDELTA 0\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Kernel parameters and options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Round robin interval.\r
+ * @details This constant is the number of system ticks allowed for the\r
+ * threads before preemption occurs. Setting this value to zero\r
+ * disables the preemption for threads with equal priority and the\r
+ * round robin becomes cooperative. Note that higher priority\r
+ * threads can still preempt, the kernel is always preemptive.\r
+ * @note Disabling the round robin preemption makes the kernel more compact\r
+ * and generally faster.\r
+ * @note The round robin preemption is not supported in tickless mode and\r
+ * must be set to zero in that case.\r
+ */\r
+#define CH_CFG_TIME_QUANTUM 20\r
+\r
+/**\r
+ * @brief Managed RAM size.\r
+ * @details Size of the RAM area to be managed by the OS. If set to zero\r
+ * then the whole available RAM is used. The core memory is made\r
+ * available to the heap allocator and/or can be used directly through\r
+ * the simplified core memory allocator.\r
+ *\r
+ * @note In order to let the OS manage the whole RAM the linker script must\r
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.\r
+ * @note Requires @p CH_CFG_USE_MEMCORE.\r
+ */\r
+#define CH_CFG_MEMCORE_SIZE 0\r
+\r
+/**\r
+ * @brief Idle thread automatic spawn suppression.\r
+ * @details When this option is activated the function @p chSysInit()\r
+ * does not spawn the idle thread. The application @p main()\r
+ * function becomes the idle thread and must implement an\r
+ * infinite loop.\r
+ */\r
+#define CH_CFG_NO_IDLE_THREAD FALSE\r
+\r
+/* Use __WFI in the idle thread for waiting. Does lower the power\r
+ * consumption. */\r
+#define CORTEX_ENABLE_WFI_IDLE TRUE\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Performance options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief OS optimization.\r
+ * @details If enabled then time efficient rather than space efficient code\r
+ * is used when two possible implementations exist.\r
+ *\r
+ * @note This is not related to the compiler optimization options.\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_OPTIMIZE_SPEED TRUE\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Subsystem options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Time Measurement APIs.\r
+ * @details If enabled then the time measurement APIs are included in\r
+ * the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_TM FALSE\r
+\r
+/**\r
+ * @brief Threads registry APIs.\r
+ * @details If enabled then the registry APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_REGISTRY TRUE\r
+\r
+/**\r
+ * @brief Threads synchronization APIs.\r
+ * @details If enabled then the @p chThdWait() function is included in\r
+ * the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_WAITEXIT TRUE\r
+\r
+/**\r
+ * @brief Semaphores APIs.\r
+ * @details If enabled then the Semaphores APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_SEMAPHORES TRUE\r
+\r
+/**\r
+ * @brief Semaphores queuing mode.\r
+ * @details If enabled then the threads are enqueued on semaphores by\r
+ * priority rather than in FIFO order.\r
+ *\r
+ * @note The default is @p FALSE. Enable this if you have special\r
+ * requirements.\r
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
+ */\r
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE\r
+\r
+/**\r
+ * @brief Mutexes APIs.\r
+ * @details If enabled then the mutexes APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_MUTEXES TRUE\r
+\r
+/**\r
+ * @brief Enables recursive behavior on mutexes.\r
+ * @note Recursive mutexes are heavier and have an increased\r
+ * memory footprint.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ * @note Requires @p CH_CFG_USE_MUTEXES.\r
+ */\r
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE\r
+\r
+/**\r
+ * @brief Conditional Variables APIs.\r
+ * @details If enabled then the conditional variables APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_MUTEXES.\r
+ */\r
+#define CH_CFG_USE_CONDVARS TRUE\r
+\r
+/**\r
+ * @brief Conditional Variables APIs with timeout.\r
+ * @details If enabled then the conditional variables APIs with timeout\r
+ * specification are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_CONDVARS.\r
+ */\r
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE\r
+\r
+/**\r
+ * @brief Events Flags APIs.\r
+ * @details If enabled then the event flags APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_EVENTS TRUE\r
+\r
+/**\r
+ * @brief Events Flags APIs with timeout.\r
+ * @details If enabled then the events APIs with timeout specification\r
+ * are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_EVENTS.\r
+ */\r
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE\r
+\r
+/**\r
+ * @brief Synchronous Messages APIs.\r
+ * @details If enabled then the synchronous messages APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_MESSAGES TRUE\r
+\r
+/**\r
+ * @brief Synchronous Messages queuing mode.\r
+ * @details If enabled then messages are served by priority rather than in\r
+ * FIFO order.\r
+ *\r
+ * @note The default is @p FALSE. Enable this if you have special\r
+ * requirements.\r
+ * @note Requires @p CH_CFG_USE_MESSAGES.\r
+ */\r
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE\r
+\r
+/**\r
+ * @brief Mailboxes APIs.\r
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are\r
+ * included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
+ */\r
+#define CH_CFG_USE_MAILBOXES TRUE\r
+\r
+/**\r
+ * @brief Core Memory Manager APIs.\r
+ * @details If enabled then the core memory manager APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_MEMCORE TRUE\r
+\r
+/**\r
+ * @brief Heap Allocator APIs.\r
+ * @details If enabled then the memory heap allocator APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or\r
+ * @p CH_CFG_USE_SEMAPHORES.\r
+ * @note Mutexes are recommended.\r
+ */\r
+#define CH_CFG_USE_HEAP TRUE\r
+\r
+/**\r
+ * @brief Memory Pools Allocator APIs.\r
+ * @details If enabled then the memory pools allocator APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#define CH_CFG_USE_MEMPOOLS TRUE\r
+\r
+/**\r
+ * @brief Dynamic Threads APIs.\r
+ * @details If enabled then the dynamic threads creation APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_WAITEXIT.\r
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.\r
+ */\r
+#define CH_CFG_USE_DYNAMIC TRUE\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Debug options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Debug option, kernel statistics.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#define CH_DBG_STATISTICS FALSE\r
+\r
+/**\r
+ * @brief Debug option, system state check.\r
+ * @details If enabled the correct call protocol for system APIs is checked\r
+ * at runtime.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE\r
+\r
+/**\r
+ * @brief Debug option, parameters checks.\r
+ * @details If enabled then the checks on the API functions input\r
+ * parameters are activated.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#define CH_DBG_ENABLE_CHECKS TRUE\r
+\r
+/**\r
+ * @brief Debug option, consistency checks.\r
+ * @details If enabled then all the assertions in the kernel code are\r
+ * activated. This includes consistency checks inside the kernel,\r
+ * runtime anomalies and port-defined checks.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#define CH_DBG_ENABLE_ASSERTS TRUE\r
+\r
+/**\r
+ * @brief Debug option, trace buffer.\r
+ * @details If enabled then the trace buffer is activated.\r
+ *\r
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.\r
+ */\r
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED\r
+\r
+/**\r
+ * @brief Trace buffer entries.\r
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is\r
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.\r
+ */\r
+#define CH_DBG_TRACE_BUFFER_SIZE 128\r
+\r
+/**\r
+ * @brief Debug option, stack checks.\r
+ * @details If enabled then a runtime stack check is performed.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ * @note The stack check is performed in a architecture/port dependent way.\r
+ * It may not be implemented or some ports.\r
+ * @note The default failure mode is to halt the system with the global\r
+ * @p panic_msg variable set to @p NULL.\r
+ */\r
+#define CH_DBG_ENABLE_STACK_CHECK TRUE\r
+\r
+/**\r
+ * @brief Debug option, stacks initialization.\r
+ * @details If enabled then the threads working area is filled with a byte\r
+ * value when a thread is created. This can be useful for the\r
+ * runtime measurement of the used stack.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#define CH_DBG_FILL_THREADS TRUE\r
+\r
+/**\r
+ * @brief Debug option, threads profiling.\r
+ * @details If enabled then a field is added to the @p thread_t structure that\r
+ * counts the system ticks occurred while executing the thread.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ * @note This debug option is not currently compatible with the\r
+ * tickless mode.\r
+ */\r
+#define CH_DBG_THREADS_PROFILING FALSE\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Kernel hooks\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Threads descriptor structure extension.\r
+ * @details User fields added to the end of the @p thread_t structure.\r
+ */\r
+#define CH_CFG_THREAD_EXTRA_FIELDS \\r
+ /* Add threads custom fields here.*/\r
+\r
+/**\r
+ * @brief Threads initialization hook.\r
+ * @details User initialization code added to the @p chThdInit() API.\r
+ *\r
+ * @note It is invoked from within @p chThdInit() and implicitly from all\r
+ * the threads creation APIs.\r
+ */\r
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \\r
+ /* Add threads initialization code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Threads finalization hook.\r
+ * @details User finalization code added to the @p chThdExit() API.\r
+ */\r
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \\r
+ /* Add threads finalization code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Context switch hook.\r
+ * @details This hook is invoked just before switching between threads.\r
+ */\r
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \\r
+ /* Context switch code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief ISR enter hook.\r
+ */\r
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \\r
+ /* IRQ prologue code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief ISR exit hook.\r
+ */\r
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \\r
+ /* IRQ epilogue code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Idle thread enter hook.\r
+ * @note This hook is invoked within a critical zone, no OS functions\r
+ * should be invoked from here.\r
+ * @note This macro can be used to activate a power saving mode.\r
+ */\r
+#define CH_CFG_IDLE_ENTER_HOOK() { \\r
+ /* Idle-enter code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Idle thread leave hook.\r
+ * @note This hook is invoked within a critical zone, no OS functions\r
+ * should be invoked from here.\r
+ * @note This macro can be used to deactivate a power saving mode.\r
+ */\r
+#define CH_CFG_IDLE_LEAVE_HOOK() { \\r
+ /* Idle-leave code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Idle Loop hook.\r
+ * @details This hook is continuously invoked by the idle thread loop.\r
+ */\r
+#define CH_CFG_IDLE_LOOP_HOOK() { \\r
+ /* Idle loop code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief System tick event hook.\r
+ * @details This hook is invoked in the system tick handler immediately\r
+ * after processing the virtual timers queue.\r
+ */\r
+#define CH_CFG_SYSTEM_TICK_HOOK() { \\r
+ /* System tick event code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief System halt hook.\r
+ * @details This hook is invoked in case to a system halting error before\r
+ * the system is halted.\r
+ */\r
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \\r
+ /* System halt code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Trace hook.\r
+ * @details This hook is invoked each time a new record is written in the\r
+ * trace buffer.\r
+ */\r
+#define CH_CFG_TRACE_HOOK(tep) { \\r
+ /* Trace code here.*/ \\r
+}\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/* Port-specific settings (override port settings defaulted in chcore.h). */\r
+/*===========================================================================*/\r
+\r
+#endif /* CHCONF_H */\r
+\r
+/** @} */\r
--- /dev/null
+#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
+#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
+
+#include "../config.h"
+
+#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+/**\r
+ * @file templates/halconf.h\r
+ * @brief HAL configuration header.\r
+ * @details HAL configuration file, this file allows to enable or disable the\r
+ * various device drivers from your application. You may also use\r
+ * this file in order to override the device drivers default settings.\r
+ *\r
+ * @addtogroup HAL_CONF\r
+ * @{\r
+ */\r
+\r
+#ifndef _HALCONF_H_\r
+#define _HALCONF_H_\r
+\r
+#include "mcuconf.h"\r
+\r
+/**\r
+ * @brief Enables the PAL subsystem.\r
+ */\r
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)\r
+#define HAL_USE_PAL TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the ADC subsystem.\r
+ */\r
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)\r
+#define HAL_USE_ADC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the CAN subsystem.\r
+ */\r
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)\r
+#define HAL_USE_CAN FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the DAC subsystem.\r
+ */\r
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)\r
+#define HAL_USE_DAC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the EXT subsystem.\r
+ */\r
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)\r
+#define HAL_USE_EXT FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the GPT subsystem.\r
+ */\r
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)\r
+#define HAL_USE_GPT FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the I2C subsystem.\r
+ */\r
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)\r
+#define HAL_USE_I2C FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the I2S subsystem.\r
+ */\r
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)\r
+#define HAL_USE_I2S FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the ICU subsystem.\r
+ */\r
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)\r
+#define HAL_USE_ICU FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the MAC subsystem.\r
+ */\r
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)\r
+#define HAL_USE_MAC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the MMC_SPI subsystem.\r
+ */\r
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)\r
+#define HAL_USE_MMC_SPI FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the PWM subsystem.\r
+ */\r
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)\r
+#define HAL_USE_PWM FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the RTC subsystem.\r
+ */\r
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)\r
+#define HAL_USE_RTC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SDC subsystem.\r
+ */\r
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)\r
+#define HAL_USE_SDC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SERIAL subsystem.\r
+ */\r
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)\r
+#define HAL_USE_SERIAL FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SERIAL over USB subsystem.\r
+ */\r
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)\r
+#define HAL_USE_SERIAL_USB FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SPI subsystem.\r
+ */\r
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)\r
+#define HAL_USE_SPI FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the UART subsystem.\r
+ */\r
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)\r
+#define HAL_USE_UART FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the USB subsystem.\r
+ */\r
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)\r
+#define HAL_USE_USB TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the WDG subsystem.\r
+ */\r
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)\r
+#define HAL_USE_WDG FALSE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* USB driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Enables synchronous APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)\r
+#define USB_USE_WAIT TRUE\r
+#endif\r
+\r
+#endif /* _HALCONF_H_ */\r
+\r
+/** @} */\r
--- /dev/null
+# Teensy LC, 3.0, 3.1, 3.2 support
+
+These ARM Teensies are now supported through [ChibiOS](http://chibios.org).
+
+You'll need to install an ARM toolchain, for instance from [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting.
+
+Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS). If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `tmk_core/tool/chibios/chibios` (so that the file `tmk_core/tool/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `tmk_core/tool/chibios/chibios-contrib`.
+
+(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.)
+
+(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.)
+
+This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
+
+For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`.
+
+## About this onekey example
+
+It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`.
+
+## Credits
+
+TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard).
+
+The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions.
+
+## Features that are not implemented yet
+
+Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome).
+
+# Matrix programming notes
+
+The notes below explain what commands can be used to examine and set the status of Teensy pins.
+
+## ChibiOS pin manipulation basics
+
+### Pins
+
+Each pin sits on a "port", each of which comprises at most 32 individual pins.
+So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number.
+
+Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number.
+
+### Mode
+
+A MCU pin can be in several modes. The basic command to set a pin mode is
+
+ palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP);
+
+The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW).
+
+### Setting
+
+Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by
+
+ palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+or set LOW by
+
+ palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+Toggling can be done with
+
+ palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+Alternatively, you can use
+
+ palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit);
+
+where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`).
+
+### Reading
+
+Reading pin status is done with
+
+ palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`).
+
+### Further docs
+
+All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html).
--- /dev/null
+/*\r
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com\r
+ * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>\r
+ *\r
+ * Permission is hereby granted, free of charge, to any person obtaining\r
+ * a copy of this software and associated documentation files (the "Software"),\r
+ * to deal in the Software without restriction, including without limitation\r
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,\r
+ * and/or sell copies of the Software, and to permit persons to whom the\r
+ * Software is furnished to do so, subject to the following conditions:\r
+ *\r
+ * The above copyright notice and this permission notice shall be included in\r
+ * all copies or substantial portions of the Software.\r
+ *\r
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS\r
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\r
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\r
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\r
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\r
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\r
+ * SOFTWARE.\r
+ */\r
+\r
+/*\r
+ * KL26Z64 memory setup.\r
+ */\r
+MEMORY\r
+{\r
+ flash0 : org = 0x00000000, len = 0x100\r
+ flash1 : org = 0x00000400, len = 0x10\r
+ flash2 : org = 0x00000410, len = 62k - 0x410\r
+ flash3 : org = 0x0000F800, len = 2k\r
+ flash4 : org = 0x00000000, len = 0\r
+ flash5 : org = 0x00000000, len = 0\r
+ flash6 : org = 0x00000000, len = 0\r
+ flash7 : org = 0x00000000, len = 0\r
+ ram0 : org = 0x1FFFF800, len = 8k\r
+ ram1 : org = 0x00000000, len = 0\r
+ ram2 : org = 0x00000000, len = 0\r
+ ram3 : org = 0x00000000, len = 0\r
+ ram4 : org = 0x00000000, len = 0\r
+ ram5 : org = 0x00000000, len = 0\r
+ ram6 : org = 0x00000000, len = 0\r
+ ram7 : org = 0x00000000, len = 0\r
+}\r
+\r
+/* Flash region for the configuration bytes.*/\r
+SECTIONS\r
+{\r
+ .cfmprotect : ALIGN(4) SUBALIGN(4)\r
+ {\r
+ KEEP(*(.cfmconfig))\r
+ } > flash1\r
+}\r
+\r
+/* For each data/text section two region are defined, a virtual region\r
+ and a load region (_LMA suffix).*/\r
+\r
+/* Flash region to be used for exception vectors.*/\r
+REGION_ALIAS("VECTORS_FLASH", flash0);\r
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);\r
+\r
+/* Flash region to be used for constructors and destructors.*/\r
+REGION_ALIAS("XTORS_FLASH", flash2);\r
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);\r
+\r
+/* Flash region to be used for code text.*/\r
+REGION_ALIAS("TEXT_FLASH", flash2);\r
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);\r
+\r
+/* Flash region to be used for read only data.*/\r
+REGION_ALIAS("RODATA_FLASH", flash2);\r
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);\r
+\r
+/* Flash region to be used for various.*/\r
+REGION_ALIAS("VARIOUS_FLASH", flash2);\r
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);\r
+\r
+/* Flash region to be used for RAM(n) initialization data.*/\r
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);\r
+\r
+/* RAM region to be used for Main stack. This stack accommodates the processing\r
+ of all exceptions and interrupts.*/\r
+REGION_ALIAS("MAIN_STACK_RAM", ram0);\r
+\r
+/* RAM region to be used for the process stack. This is the stack used by\r
+ the main() function.*/\r
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);\r
+\r
+/* RAM region to be used for data segment.*/\r
+REGION_ALIAS("DATA_RAM", ram0);\r
+REGION_ALIAS("DATA_RAM_LMA", flash2);\r
+\r
+/* RAM region to be used for BSS segment.*/\r
+REGION_ALIAS("BSS_RAM", ram0);\r
+\r
+/* RAM region to be used for the default heap.*/\r
+REGION_ALIAS("HEAP_RAM", ram0);\r
+\r
+__eeprom_workarea_start__ = ORIGIN(flash3);\r
+__eeprom_workarea_size__ = LENGTH(flash3);\r
+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;\r
+\r
+/* Generic rules inclusion.*/\r
+INCLUDE rules.ld\r
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // output high
+ palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
+ } else {
+ // Hi-Z
+ palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT);
+ }
+}
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * scan matrix
+ */
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "wait.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0)
+#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
+#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
+
+void matrix_init(void)
+{
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ //debug
+ debug_matrix = true;
+ LED_ON();
+ wait_ms(500);
+ LED_OFF();
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ select_row(i);
+ wait_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i] != cols) {
+ matrix_debouncing[i] = cols;
+ if (debouncing) {
+ debug("bounce!: "); debug_hex(debouncing); debug("\n");
+ }
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ wait_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+/* Column pin configuration
+ */
+static void init_cols(void)
+{
+ // internal pull-up
+ palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP);
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+ return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0));
+ // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
+}
+
+/* Row pin configuration
+ */
+static void unselect_rows(void)
+{
+ palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z
+}
+
+static void select_row(uint8_t row)
+{
+ (void)row;
+ // Output low to select
+ switch (row) {
+ case 0:
+ palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL);
+ palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5);
+ break;
+ }
+}
--- /dev/null
+/*\r
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+#ifndef _MCUCONF_H_\r
+#define _MCUCONF_H_\r
+\r
+#define KL2x_MCUCONF\r
+\r
+/*\r
+ * HAL driver system settings.\r
+ */\r
+#if 1\r
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */\r
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE\r
+#define KINETIS_PLLCLK_FREQUENCY 96000000UL\r
+#define KINETIS_SYSCLK_FREQUENCY 48000000UL\r
+#endif\r
+\r
+#if 0\r
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */\r
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI\r
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */\r
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */\r
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */\r
+#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */\r
+#endif\r
+\r
+/*\r
+ * SERIAL driver system settings.\r
+ */\r
+#define KINETIS_SERIAL_USE_UART0 TRUE\r
+\r
+/*\r
+ * USB driver settings\r
+ */\r
+#define KINETIS_USB_USE_USB0 TRUE\r
+/* Need to redefine this, since the default is for K20x */\r
+/* This is for Teensy LC; you should comment it out (or change to 5)\r
+ * for Teensy 3.x */\r
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2\r
+\r
+#endif /* _MCUCONF_H_ */\r
--- /dev/null
+#include "teensy_lc_onekey.h"
--- /dev/null
+#ifndef TEENSY_LC_ONEKEY_H
+#define TEENSY_LC_ONEKEY_H
+#include "chbibios_test.h"
+#endif
+++ /dev/null
-# project specific files
-SRC = matrix.c \
- led.c
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Build Options
-# comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-MOUSEKEY_ENABLE ?= yes # Mouse keys
-EXTRAKEY_ENABLE ?= yes # Audio control and System control
-CONSOLE_ENABLE ?= yes # Console for debug
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
-
-ifndef QUANTUM_DIR
- include ../../Makefile
-endif
+++ /dev/null
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 10000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE FALSE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP FALSE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS FALSE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
+++ /dev/null
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6464
-#define DEVICE_VER 0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/* at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER "TMK"
-#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00'
-#define PRODUCT "ChibiOS TMK test"
-#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00'
-#define DESCRIPTION "TMK keyboard firmware over ChibiOS"
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 1
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+++ /dev/null
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stm32_f072_onekey.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- {{KC_CAPS}}, // test with KC_CAPS, KC_A, KC_BTLD
-};
-
-const uint16_t fn_actions[] = {
-};
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
- (void)usb_led;
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // output high
- palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(GPIOC, GPIOC_LED_GREEN);
- } else {
- // Hi-Z
- palSetPadMode(GPIOC, GPIOC_LED_GREEN, PAL_MODE_INPUT);
- }
-}
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-#define LED_ON() do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0)
-#define LED_OFF() do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0)
-#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0)
-
-void matrix_init(void)
-{
- // initialize row and col
- unselect_rows();
- init_cols();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- //debug
- debug_matrix = true;
- LED_ON();
- wait_ms(500);
- LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- select_row(i);
- wait_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i] != cols) {
- matrix_debouncing[i] = cols;
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); debug("\n");
- }
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- wait_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-/* Column pin configuration
- */
-static void init_cols(void)
-{
- // don't need pullup/down, since it's pulled down in hardware
- palSetPadMode(GPIOA, GPIOA_BUTTON, PAL_MODE_INPUT);
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
- return ((palReadPad(GPIOA, GPIOA_BUTTON)==PAL_LOW) ? 0 : (1<<0));
- // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
-}
-
-/* Row pin configuration
- */
-static void unselect_rows(void)
-{
- // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
-}
-
-static void select_row(uint8_t row)
-{
- (void)row;
- // Output low to select
- // switch (row) {
- // case 0:
- // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
- // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
- // break;
- // }
-}
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-/*\r
- * STM32F0xx drivers configuration.\r
- * The following settings override the default settings present in\r
- * the various device driver implementation headers.\r
- * Note that the settings for each driver only have effect if the whole\r
- * driver is enabled in halconf.h.\r
- *\r
- * IRQ priorities:\r
- * 3...0 Lowest...Highest.\r
- *\r
- * DMA priorities:\r
- * 0...3 Lowest...Highest.\r
- */\r
-\r
-#define STM32F0xx_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#define STM32_NO_INIT FALSE\r
-#define STM32_PVD_ENABLE FALSE\r
-#define STM32_PLS STM32_PLS_LEV0\r
-#define STM32_HSI_ENABLED TRUE\r
-#define STM32_HSI14_ENABLED TRUE\r
-#define STM32_HSI48_ENABLED FALSE\r
-#define STM32_LSI_ENABLED TRUE\r
-#define STM32_HSE_ENABLED FALSE\r
-#define STM32_LSE_ENABLED FALSE\r
-#define STM32_SW STM32_SW_PLL\r
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2\r
-#define STM32_PREDIV_VALUE 1\r
-#define STM32_PLLMUL_VALUE 12\r
-#define STM32_HPRE STM32_HPRE_DIV1\r
-#define STM32_PPRE STM32_PPRE_DIV1\r
-#define STM32_ADCSW STM32_ADCSW_HSI14\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_ADCSW STM32_ADCSW_HSI14\r
-#define STM32_USBSW STM32_USBSW_HSI48\r
-#define STM32_CECSW STM32_CECSW_HSI\r
-#define STM32_I2C1SW STM32_I2C1SW_HSI\r
-#define STM32_USART1SW STM32_USART1SW_PCLK\r
-#define STM32_RTCSEL STM32_RTCSEL_LSI\r
-\r
-/*\r
- * ADC driver system settings.\r
- */\r
-#define STM32_ADC_USE_ADC1 FALSE\r
-#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
-#define STM32_ADC_IRQ_PRIORITY 2\r
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2\r
-\r
-/*\r
- * EXT driver system settings.\r
- */\r
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3\r
-\r
-/*\r
- * GPT driver system settings.\r
- */\r
-#define STM32_GPT_USE_TIM1 FALSE\r
-#define STM32_GPT_USE_TIM2 FALSE\r
-#define STM32_GPT_USE_TIM3 FALSE\r
-#define STM32_GPT_USE_TIM14 FALSE\r
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2\r
-\r
-/*\r
- * I2C driver system settings.\r
- */\r
-#define STM32_I2C_USE_I2C1 FALSE\r
-#define STM32_I2C_USE_I2C2 FALSE\r
-#define STM32_I2C_BUSY_TIMEOUT 50\r
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3\r
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3\r
-#define STM32_I2C_USE_DMA TRUE\r
-#define STM32_I2C_I2C1_DMA_PRIORITY 1\r
-#define STM32_I2C_I2C2_DMA_PRIORITY 1\r
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ICU driver system settings.\r
- */\r
-#define STM32_ICU_USE_TIM1 FALSE\r
-#define STM32_ICU_USE_TIM2 FALSE\r
-#define STM32_ICU_USE_TIM3 FALSE\r
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3\r
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3\r
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3\r
-\r
-/*\r
- * PWM driver system settings.\r
- */\r
-#define STM32_PWM_USE_ADVANCED FALSE\r
-#define STM32_PWM_USE_TIM1 FALSE\r
-#define STM32_PWM_USE_TIM2 FALSE\r
-#define STM32_PWM_USE_TIM3 FALSE\r
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3\r
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3\r
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define STM32_SERIAL_USE_USART1 FALSE\r
-#define STM32_SERIAL_USE_USART2 FALSE\r
-#define STM32_SERIAL_USART1_PRIORITY 3\r
-#define STM32_SERIAL_USART2_PRIORITY 3\r
-\r
-/*\r
- * SPI driver system settings.\r
- */\r
-#define STM32_SPI_USE_SPI1 FALSE\r
-#define STM32_SPI_USE_SPI2 FALSE\r
-#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2\r
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2\r
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ST driver system settings.\r
- */\r
-#define STM32_ST_IRQ_PRIORITY 2\r
-#define STM32_ST_USE_TIMER 2\r
-\r
-/*\r
- * UART driver system settings.\r
- */\r
-#define STM32_UART_USE_USART1 FALSE\r
-#define STM32_UART_USE_USART2 FALSE\r
-#define STM32_UART_USART1_IRQ_PRIORITY 3\r
-#define STM32_UART_USART2_IRQ_PRIORITY 3\r
-#define STM32_UART_USART1_DMA_PRIORITY 0\r
-#define STM32_UART_USART2_DMA_PRIORITY 0\r
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * USB driver system settings.\r
- */\r
-#define STM32_USB_USE_USB1 TRUE\r
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 3\r
-\r
-#endif /* _MCUCONF_H_ */\r
+++ /dev/null
-#include "stm32_f072_onekey.h"
+++ /dev/null
-#ifndef STM32_F072_ONEKEY_H
-#define STM32_F072_ONEKEY_H
-#include "quantum.h"
-#endif
-
+++ /dev/null
-# project specific files
-SRC = matrix.c \
- led.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = GENERIC_STM32_F103
-
-# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-# MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
-# BOARD = MAPLEMINI_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Build Options
-# comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-## BOOTMAGIC is not supported on STM32 chips yet.
-MOUSEKEY_ENABLE ?= yes # Mouse keys
-EXTRAKEY_ENABLE ?= yes # Audio control and System control
-# CONSOLE_ENABLE ?= yes # Console for debug
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
-
-ifndef QUANTUM_DIR
- include ../../Makefile
-endif
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#include "hal.h"\r
-\r
-/**\r
- * @brief PAL setup.\r
- * @details Digital I/O ports static configuration as defined in @p board.h.\r
- * This variable is used by the HAL when initializing the PAL driver.\r
- */\r
-#if HAL_USE_PAL || defined(__DOXYGEN__)\r
-const PALConfig pal_default_config =\r
-{\r
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},\r
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},\r
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},\r
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},\r
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},\r
-};\r
-#endif\r
-\r
-/*\r
- * Early initialization code.\r
- * This initialization must be performed just after stack setup and before\r
- * any other initialization.\r
- */\r
-void __early_init(void) {\r
-\r
- stm32_clock_init();\r
-}\r
-\r
-/*\r
- * Board-specific initialization code.\r
- */\r
-void boardInit(void) {\r
-}\r
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _BOARD_H_\r
-#define _BOARD_H_\r
-\r
-/*\r
- * Setup for a Generic STM32F103 board.\r
- */\r
-\r
-/*\r
- * Board identifier.\r
- */\r
-#define BOARD_GENERIC_STM32_F103\r
-#define BOARD_NAME "Generic STM32F103x board"\r
-\r
-/*\r
- * Board frequencies.\r
- */\r
-#define STM32_LSECLK 32768\r
-#define STM32_HSECLK 8000000\r
-\r
-/*\r
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.\r
- */\r
-#define STM32F103xB\r
-\r
-/*\r
- * IO pins assignments\r
- */\r
-\r
-/* on-board */\r
-\r
-#define GPIOC_LED 13\r
-#define GPIOD_OSC_IN 0\r
-#define GPIOD_OSC_OUT 1\r
-\r
-/* In case your board has a "USB enable" hardware\r
- controlled by a pin, define it here. (It could be just\r
- a 1.5k resistor connected to D+ line.)\r
-*/\r
-/*\r
-#define GPIOB_USB_DISC 10\r
-*/\r
-\r
-/*\r
- * I/O ports initial setup, this configuration is established soon after reset\r
- * in the initialization code.\r
- *\r
- * The digits have the following meaning:\r
- * 0 - Analog input.\r
- * 1 - Push Pull output 10MHz.\r
- * 2 - Push Pull output 2MHz.\r
- * 3 - Push Pull output 50MHz.\r
- * 4 - Digital input.\r
- * 5 - Open Drain output 10MHz.\r
- * 6 - Open Drain output 2MHz.\r
- * 7 - Open Drain output 50MHz.\r
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.\r
- * 9 - Alternate Push Pull output 10MHz.\r
- * A - Alternate Push Pull output 2MHz.\r
- * B - Alternate Push Pull output 50MHz.\r
- * C - Reserved.\r
- * D - Alternate Open Drain output 10MHz.\r
- * E - Alternate Open Drain output 2MHz.\r
- * F - Alternate Open Drain output 50MHz.\r
- * Please refer to the STM32 Reference Manual for details.\r
- */\r
-\r
-/*\r
- * Port A setup.\r
- * Everything input with pull-up except:\r
- * PA2 - Alternate output (USART2 TX).\r
- * PA3 - Normal input (USART2 RX).\r
- * PA9 - Alternate output (USART1 TX).\r
- * PA10 - Normal input (USART1 RX).\r
- */\r
-#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */\r
-#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */\r
-#define VAL_GPIOAODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port B setup.\r
- * Everything input with pull-up except:\r
- * PB10 - Push Pull output (USB switch).\r
- */\r
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */\r
-#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */\r
-#define VAL_GPIOBODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port C setup.\r
- * Everything input with pull-up except:\r
- * PC13 - Push Pull output (LED).\r
- */\r
-#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */\r
-#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */\r
-#define VAL_GPIOCODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port D setup.\r
- * Everything input with pull-up except:\r
- * PD0 - Normal input (XTAL).\r
- * PD1 - Normal input (XTAL).\r
- */\r
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */\r
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */\r
-#define VAL_GPIODODR 0xFFFFFFFF\r
-\r
-/*\r
- * Port E setup.\r
- * Everything input with pull-up except:\r
- */\r
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */\r
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */\r
-#define VAL_GPIOEODR 0xFFFFFFFF\r
-\r
-/*\r
- * USB bus activation macro, required by the USB driver.\r
- */\r
-/* The point is that most of the generic STM32F103* boards\r
- have a 1.5k resistor connected on one end to the D+ line\r
- and on the other end to some pin. Or even a slightly more\r
- complicated "USB enable" circuit, controlled by a pin.\r
- That should go here.\r
-\r
- However on some boards (e.g. one that I have), there's no\r
- such hardware. In which case it's better to not do anything.\r
-*/\r
-/*\r
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)\r
-*/\r
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);\r
-\r
-/*\r
- * USB bus de-activation macro, required by the USB driver.\r
- */\r
-/*\r
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)\r
-*/\r
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);\r
-\r
-#if !defined(_FROM_ASM_)\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
- void boardInit(void);\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-#endif /* _FROM_ASM_ */\r
-\r
-#endif /* _BOARD_H_ */\r
+++ /dev/null
-# List of all the board related files.\r
-BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c\r
-\r
-# Required include directories\r
-BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103\r
+++ /dev/null
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-// so setting anything here does not make much sense
-// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 16
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 2000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS FALSE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
+++ /dev/null
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6464
-#define DEVICE_VER 0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/* at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER "TMK"
-#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00'
-#define PRODUCT "ChibiOS TMK test"
-#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00'
-#define DESCRIPTION "TMK keyboard firmware over ChibiOS"
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 1
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-#!/bin/bash
-Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+++ /dev/null
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stm32_f103_onekey.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- {{KC_CAPS}}, // test with KC_CAPS, KC_A, KC_BTLD
-};
-
-const uint16_t fn_actions[] = {
-};
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/*\r
- * ST32F103xB memory setup for use with the maplemini bootloader.\r
- * You will have to\r
- * #define CORTEX_VTOR_INIT 0x5000\r
- * in your projects chconf.h\r
- */\r
-MEMORY\r
-{\r
- flash0 : org = 0x08002000, len = 128k - 0x2000\r
- flash1 : org = 0x00000000, len = 0\r
- flash2 : org = 0x00000000, len = 0\r
- flash3 : org = 0x00000000, len = 0\r
- flash4 : org = 0x00000000, len = 0\r
- flash5 : org = 0x00000000, len = 0\r
- flash6 : org = 0x00000000, len = 0\r
- flash7 : org = 0x00000000, len = 0\r
- ram0 : org = 0x20000000, len = 20k\r
- ram1 : org = 0x00000000, len = 0\r
- ram2 : org = 0x00000000, len = 0\r
- ram3 : org = 0x00000000, len = 0\r
- ram4 : org = 0x00000000, len = 0\r
- ram5 : org = 0x00000000, len = 0\r
- ram6 : org = 0x00000000, len = 0\r
- ram7 : org = 0x00000000, len = 0\r
-}\r
-\r
-/* For each data/text section two region are defined, a virtual region\r
- and a load region (_LMA suffix).*/\r
-\r
-/* Flash region to be used for exception vectors.*/\r
-REGION_ALIAS("VECTORS_FLASH", flash0);\r
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for constructors and destructors.*/\r
-REGION_ALIAS("XTORS_FLASH", flash0);\r
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for code text.*/\r
-REGION_ALIAS("TEXT_FLASH", flash0);\r
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for read only data.*/\r
-REGION_ALIAS("RODATA_FLASH", flash0);\r
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for various.*/\r
-REGION_ALIAS("VARIOUS_FLASH", flash0);\r
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for RAM(n) initialization data.*/\r
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);\r
-\r
-/* RAM region to be used for Main stack. This stack accommodates the processing\r
- of all exceptions and interrupts.*/\r
-REGION_ALIAS("MAIN_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for the process stack. This is the stack used by\r
- the main() function.*/\r
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for data segment.*/\r
-REGION_ALIAS("DATA_RAM", ram0);\r
-REGION_ALIAS("DATA_RAM_LMA", flash0);\r
-\r
-/* RAM region to be used for BSS segment.*/\r
-REGION_ALIAS("BSS_RAM", ram0);\r
-\r
-/* RAM region to be used for the default heap.*/\r
-REGION_ALIAS("HEAP_RAM", ram0);\r
-\r
-/* Generic rules inclusion.*/\r
-INCLUDE rules.ld\r
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- /* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
- palClearPad(GPIOC, 13);
-#endif
- /* Maple Mini */
-#ifdef BOARD_MAPLEMINI_STM32_F103
- palSetPad(GPIOB, 1);
-#endif
- } else {
- /* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
- palSetPad(GPIOC, 13);
-#endif
- /* Maple Mini */
-#ifdef BOARD_MAPLEMINI_STM32_F103
- palClearPad(GPIOB,1);
-#endif
- }
-}
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-#define LED_ON() do { palClearPad(GPIOC, GPIOC_LED) ;} while (0)
-#define LED_OFF() do { palSetPad(GPIOC, GPIOC_LED); } while (0)
-#define LED_TGL() do { palTogglePad(GPIOC, GPIOC_LED); } while (0)
-#endif
-
-/* Maple Mini */
-#ifdef BOARD_MAPLEMINI_STM32_F103
-#define LED_ON() do { palSetPad(GPIOB, 1) ;} while (0)
-#define LED_OFF() do { palClearPad(GPIOB, 1); } while (0)
-#define LED_TGL() do { palTogglePad(GPIOB, 1); } while (0)
-#endif
-
-void matrix_init(void)
-{
- // initialize row and col
- unselect_rows();
- init_cols();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- //debug
- debug_matrix = true;
- LED_ON();
- wait_ms(500);
- LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- select_row(i);
- wait_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i] != cols) {
- matrix_debouncing[i] = cols;
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); debug("\n");
- }
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- wait_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-/* Column pin configuration
- */
-static void init_cols(void)
-{
-#ifdef BOARD_MAPLEMINI_STM32_F103
- // don't need pullup/down, since it's pulled down in hardware
- palSetPadMode(GPIOB, 8, PAL_MODE_INPUT);
-#else
- palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
-#endif
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
- return ((palReadPad(GPIOB, 8)==PAL_LOW) ? 0 : (1<<0));
- // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
-}
-
-/* Row pin configuration
- */
-static void unselect_rows(void)
-{
- // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
-}
-
-static void select_row(uint8_t row)
-{
- (void)row;
- // Output low to select
- // switch (row) {
- // case 0:
- // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
- // palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
- // break;
- // }
-}
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-#define STM32F103_MCUCONF\r
-\r
-/*\r
- * STM32F103 drivers configuration.\r
- * The following settings override the default settings present in\r
- * the various device driver implementation headers.\r
- * Note that the settings for each driver only have effect if the whole\r
- * driver is enabled in halconf.h.\r
- *\r
- * IRQ priorities:\r
- * 15...0 Lowest...Highest.\r
- *\r
- * DMA priorities:\r
- * 0...3 Lowest...Highest.\r
- */\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#define STM32_NO_INIT FALSE\r
-#define STM32_HSI_ENABLED TRUE\r
-#define STM32_LSI_ENABLED FALSE\r
-#define STM32_HSE_ENABLED TRUE\r
-#define STM32_LSE_ENABLED FALSE\r
-#define STM32_SW STM32_SW_PLL\r
-#define STM32_PLLSRC STM32_PLLSRC_HSE\r
-#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1\r
-#define STM32_PLLMUL_VALUE 9\r
-#define STM32_HPRE STM32_HPRE_DIV1\r
-#define STM32_PPRE1 STM32_PPRE1_DIV2\r
-#define STM32_PPRE2 STM32_PPRE2_DIV2\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_USB_CLOCK_REQUIRED TRUE\r
-#define STM32_USBPRE STM32_USBPRE_DIV1P5\r
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
-#define STM32_RTCSEL STM32_RTCSEL_HSEDIV\r
-#define STM32_PVD_ENABLE FALSE\r
-#define STM32_PLS STM32_PLS_LEV0\r
-\r
-/*\r
- * ADC driver system settings.\r
- */\r
-#define STM32_ADC_USE_ADC1 FALSE\r
-#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
-#define STM32_ADC_ADC1_IRQ_PRIORITY 6\r
-\r
-/*\r
- * CAN driver system settings.\r
- */\r
-#define STM32_CAN_USE_CAN1 FALSE\r
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11\r
-\r
-/*\r
- * EXT driver system settings.\r
- */\r
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6\r
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6\r
-\r
-/*\r
- * GPT driver system settings.\r
- */\r
-#define STM32_GPT_USE_TIM1 FALSE\r
-#define STM32_GPT_USE_TIM2 FALSE\r
-#define STM32_GPT_USE_TIM3 FALSE\r
-#define STM32_GPT_USE_TIM4 FALSE\r
-#define STM32_GPT_USE_TIM5 FALSE\r
-#define STM32_GPT_USE_TIM8 FALSE\r
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7\r
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7\r
-\r
-/*\r
- * I2C driver system settings.\r
- */\r
-#define STM32_I2C_USE_I2C1 FALSE\r
-#define STM32_I2C_USE_I2C2 FALSE\r
-#define STM32_I2C_BUSY_TIMEOUT 50\r
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5\r
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5\r
-#define STM32_I2C_I2C1_DMA_PRIORITY 3\r
-#define STM32_I2C_I2C2_DMA_PRIORITY 3\r
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ICU driver system settings.\r
- */\r
-#define STM32_ICU_USE_TIM1 FALSE\r
-#define STM32_ICU_USE_TIM2 FALSE\r
-#define STM32_ICU_USE_TIM3 FALSE\r
-#define STM32_ICU_USE_TIM4 FALSE\r
-#define STM32_ICU_USE_TIM5 FALSE\r
-#define STM32_ICU_USE_TIM8 FALSE\r
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7\r
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7\r
-\r
-/*\r
- * PWM driver system settings.\r
- */\r
-#define STM32_PWM_USE_ADVANCED FALSE\r
-#define STM32_PWM_USE_TIM1 FALSE\r
-#define STM32_PWM_USE_TIM2 FALSE\r
-#define STM32_PWM_USE_TIM3 FALSE\r
-#define STM32_PWM_USE_TIM4 FALSE\r
-#define STM32_PWM_USE_TIM5 FALSE\r
-#define STM32_PWM_USE_TIM8 FALSE\r
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7\r
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7\r
-\r
-/*\r
- * RTC driver system settings.\r
- */\r
-#define STM32_RTC_IRQ_PRIORITY 15\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define STM32_SERIAL_USE_USART1 FALSE\r
-#define STM32_SERIAL_USE_USART2 FALSE\r
-#define STM32_SERIAL_USE_USART3 FALSE\r
-#define STM32_SERIAL_USE_UART4 FALSE\r
-#define STM32_SERIAL_USE_UART5 FALSE\r
-#define STM32_SERIAL_USART1_PRIORITY 12\r
-#define STM32_SERIAL_USART2_PRIORITY 12\r
-#define STM32_SERIAL_USART3_PRIORITY 12\r
-#define STM32_SERIAL_UART4_PRIORITY 12\r
-#define STM32_SERIAL_UART5_PRIORITY 12\r
-\r
-/*\r
- * SPI driver system settings.\r
- */\r
-#define STM32_SPI_USE_SPI1 FALSE\r
-#define STM32_SPI_USE_SPI2 FALSE\r
-#define STM32_SPI_USE_SPI3 FALSE\r
-#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI3_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10\r
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10\r
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10\r
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ST driver system settings.\r
- */\r
-#define STM32_ST_IRQ_PRIORITY 8\r
-#define STM32_ST_USE_TIMER 2\r
-\r
-/*\r
- * UART driver system settings.\r
- */\r
-#define STM32_UART_USE_USART1 FALSE\r
-#define STM32_UART_USE_USART2 FALSE\r
-#define STM32_UART_USE_USART3 FALSE\r
-#define STM32_UART_USART1_IRQ_PRIORITY 12\r
-#define STM32_UART_USART2_IRQ_PRIORITY 12\r
-#define STM32_UART_USART3_IRQ_PRIORITY 12\r
-#define STM32_UART_USART1_DMA_PRIORITY 0\r
-#define STM32_UART_USART2_DMA_PRIORITY 0\r
-#define STM32_UART_USART3_DMA_PRIORITY 0\r
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * USB driver system settings.\r
- */\r
-#define STM32_USB_USE_USB1 TRUE\r
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13\r
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14\r
-\r
-#endif /* _MCUCONF_H_ */\r
+++ /dev/null
-#include "stm32_f103_onekey.h"
+++ /dev/null
-#ifndef STM32_F103_ONEKEY_H
-#define STM32_F103_ONEKEY_H
-#include "quantum.h"
-#endif
+++ /dev/null
-# project specific files
-SRC = matrix.c \
- led.c
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-# KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = KL2x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-# - MKL26Z64 for Teensy LC
-# - MK20DX128 for Teensy 3.0
-# - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MKL26Z64
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-# - kl2x for Teensy LC
-# - k20x5 for Teensy 3.0
-# - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = kl2x
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# - BOARD =
-# - PJRC_TEENSY_LC for Teensy LC
-# - PJRC_TEENSY_3 for Teensy 3.0
-# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_LC
-
-# Cortex version
-# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
-MCU = cortex-m0plus
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 6
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes # Mouse keys
-EXTRAKEY_ENABLE ?= yes # Audio control and System control
-CONSOLE_ENABLE ?= yes # Console for debug
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
-
-ifndef QUANTUM_DIR
- include ../../Makefile
-endif
+++ /dev/null
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC = matrix.c \
- led.c
-
-ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
-else
- SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-# KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-# - MKL26Z64 for Teensy LC
-# - MK20DX128 for Teensy 3.0
-# - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX128
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-# - kl2x for Teensy LC
-# - k20x5 for Teensy 3.0
-# - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# - BOARD =
-# - PJRC_TEENSY_LC for Teensy LC
-# - PJRC_TEENSY_3 for Teensy 3.0
-# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk
+++ /dev/null
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC = matrix.c \
- led.c
-
-ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
-else
- SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-# KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-# - MKL26Z64 for Teensy LC
-# - MK20DX128 for Teensy 3.0
-# - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX256
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-# - kl2x for Teensy LC
-# - k20x5 for Teensy 3.0
-# - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# - BOARD =
-# - PJRC_TEENSY_LC for Teensy LC
-# - PJRC_TEENSY_3 for Teensy 3.0
-# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/**\r
- * @file templates/chconf.h\r
- * @brief Configuration file template.\r
- * @details A copy of this file must be placed in each project directory, it\r
- * contains the application specific kernel settings.\r
- *\r
- * @addtogroup config\r
- * @details Kernel related settings and hooks.\r
- * @{\r
- */\r
-\r
-#ifndef CHCONF_H\r
-#define CHCONF_H\r
-\r
-#define _CHIBIOS_RT_CONF_\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name System timers settings\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief System time counter resolution.\r
- * @note Allowed values are 16 or 32 bits.\r
- */\r
-#define CH_CFG_ST_RESOLUTION 32\r
-\r
-/**\r
- * @brief System tick frequency.\r
- * @details Frequency of the system timer that drives the system ticks. This\r
- * setting also defines the system tick time unit.\r
- */\r
-#define CH_CFG_ST_FREQUENCY 1000\r
-\r
-/**\r
- * @brief Time delta constant for the tick-less mode.\r
- * @note If this value is zero then the system uses the classic\r
- * periodic tick. This value represents the minimum number\r
- * of ticks that is safe to specify in a timeout directive.\r
- * The value one is not valid, timeouts are rounded up to\r
- * this value.\r
- */\r
-#define CH_CFG_ST_TIMEDELTA 0\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Kernel parameters and options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Round robin interval.\r
- * @details This constant is the number of system ticks allowed for the\r
- * threads before preemption occurs. Setting this value to zero\r
- * disables the preemption for threads with equal priority and the\r
- * round robin becomes cooperative. Note that higher priority\r
- * threads can still preempt, the kernel is always preemptive.\r
- * @note Disabling the round robin preemption makes the kernel more compact\r
- * and generally faster.\r
- * @note The round robin preemption is not supported in tickless mode and\r
- * must be set to zero in that case.\r
- */\r
-#define CH_CFG_TIME_QUANTUM 20\r
-\r
-/**\r
- * @brief Managed RAM size.\r
- * @details Size of the RAM area to be managed by the OS. If set to zero\r
- * then the whole available RAM is used. The core memory is made\r
- * available to the heap allocator and/or can be used directly through\r
- * the simplified core memory allocator.\r
- *\r
- * @note In order to let the OS manage the whole RAM the linker script must\r
- * provide the @p __heap_base__ and @p __heap_end__ symbols.\r
- * @note Requires @p CH_CFG_USE_MEMCORE.\r
- */\r
-#define CH_CFG_MEMCORE_SIZE 0\r
-\r
-/**\r
- * @brief Idle thread automatic spawn suppression.\r
- * @details When this option is activated the function @p chSysInit()\r
- * does not spawn the idle thread. The application @p main()\r
- * function becomes the idle thread and must implement an\r
- * infinite loop.\r
- */\r
-#define CH_CFG_NO_IDLE_THREAD FALSE\r
-\r
-/* Use __WFI in the idle thread for waiting. Does lower the power\r
- * consumption. */\r
-#define CORTEX_ENABLE_WFI_IDLE TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Performance options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief OS optimization.\r
- * @details If enabled then time efficient rather than space efficient code\r
- * is used when two possible implementations exist.\r
- *\r
- * @note This is not related to the compiler optimization options.\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_OPTIMIZE_SPEED TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Subsystem options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Time Measurement APIs.\r
- * @details If enabled then the time measurement APIs are included in\r
- * the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_TM FALSE\r
-\r
-/**\r
- * @brief Threads registry APIs.\r
- * @details If enabled then the registry APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_REGISTRY TRUE\r
-\r
-/**\r
- * @brief Threads synchronization APIs.\r
- * @details If enabled then the @p chThdWait() function is included in\r
- * the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_WAITEXIT TRUE\r
-\r
-/**\r
- * @brief Semaphores APIs.\r
- * @details If enabled then the Semaphores APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_SEMAPHORES TRUE\r
-\r
-/**\r
- * @brief Semaphores queuing mode.\r
- * @details If enabled then the threads are enqueued on semaphores by\r
- * priority rather than in FIFO order.\r
- *\r
- * @note The default is @p FALSE. Enable this if you have special\r
- * requirements.\r
- * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
- */\r
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE\r
-\r
-/**\r
- * @brief Mutexes APIs.\r
- * @details If enabled then the mutexes APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MUTEXES TRUE\r
-\r
-/**\r
- * @brief Enables recursive behavior on mutexes.\r
- * @note Recursive mutexes are heavier and have an increased\r
- * memory footprint.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note Requires @p CH_CFG_USE_MUTEXES.\r
- */\r
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE\r
-\r
-/**\r
- * @brief Conditional Variables APIs.\r
- * @details If enabled then the conditional variables APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_MUTEXES.\r
- */\r
-#define CH_CFG_USE_CONDVARS TRUE\r
-\r
-/**\r
- * @brief Conditional Variables APIs with timeout.\r
- * @details If enabled then the conditional variables APIs with timeout\r
- * specification are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_CONDVARS.\r
- */\r
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE\r
-\r
-/**\r
- * @brief Events Flags APIs.\r
- * @details If enabled then the event flags APIs are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_EVENTS TRUE\r
-\r
-/**\r
- * @brief Events Flags APIs with timeout.\r
- * @details If enabled then the events APIs with timeout specification\r
- * are included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_EVENTS.\r
- */\r
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE\r
-\r
-/**\r
- * @brief Synchronous Messages APIs.\r
- * @details If enabled then the synchronous messages APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MESSAGES TRUE\r
-\r
-/**\r
- * @brief Synchronous Messages queuing mode.\r
- * @details If enabled then messages are served by priority rather than in\r
- * FIFO order.\r
- *\r
- * @note The default is @p FALSE. Enable this if you have special\r
- * requirements.\r
- * @note Requires @p CH_CFG_USE_MESSAGES.\r
- */\r
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE\r
-\r
-/**\r
- * @brief Mailboxes APIs.\r
- * @details If enabled then the asynchronous messages (mailboxes) APIs are\r
- * included in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
- */\r
-#define CH_CFG_USE_MAILBOXES TRUE\r
-\r
-/**\r
- * @brief Core Memory Manager APIs.\r
- * @details If enabled then the core memory manager APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MEMCORE TRUE\r
-\r
-/**\r
- * @brief Heap Allocator APIs.\r
- * @details If enabled then the memory heap allocator APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or\r
- * @p CH_CFG_USE_SEMAPHORES.\r
- * @note Mutexes are recommended.\r
- */\r
-#define CH_CFG_USE_HEAP TRUE\r
-\r
-/**\r
- * @brief Memory Pools Allocator APIs.\r
- * @details If enabled then the memory pools allocator APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- */\r
-#define CH_CFG_USE_MEMPOOLS TRUE\r
-\r
-/**\r
- * @brief Dynamic Threads APIs.\r
- * @details If enabled then the dynamic threads creation APIs are included\r
- * in the kernel.\r
- *\r
- * @note The default is @p TRUE.\r
- * @note Requires @p CH_CFG_USE_WAITEXIT.\r
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.\r
- */\r
-#define CH_CFG_USE_DYNAMIC TRUE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Debug options\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Debug option, kernel statistics.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_STATISTICS FALSE\r
-\r
-/**\r
- * @brief Debug option, system state check.\r
- * @details If enabled the correct call protocol for system APIs is checked\r
- * at runtime.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE\r
-\r
-/**\r
- * @brief Debug option, parameters checks.\r
- * @details If enabled then the checks on the API functions input\r
- * parameters are activated.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_ENABLE_CHECKS TRUE\r
-\r
-/**\r
- * @brief Debug option, consistency checks.\r
- * @details If enabled then all the assertions in the kernel code are\r
- * activated. This includes consistency checks inside the kernel,\r
- * runtime anomalies and port-defined checks.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_ENABLE_ASSERTS TRUE\r
-\r
-/**\r
- * @brief Debug option, trace buffer.\r
- * @details If enabled then the trace buffer is activated.\r
- *\r
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.\r
- */\r
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED\r
-\r
-/**\r
- * @brief Trace buffer entries.\r
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is\r
- * different from @p CH_DBG_TRACE_MASK_DISABLED.\r
- */\r
-#define CH_DBG_TRACE_BUFFER_SIZE 128\r
-\r
-/**\r
- * @brief Debug option, stack checks.\r
- * @details If enabled then a runtime stack check is performed.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note The stack check is performed in a architecture/port dependent way.\r
- * It may not be implemented or some ports.\r
- * @note The default failure mode is to halt the system with the global\r
- * @p panic_msg variable set to @p NULL.\r
- */\r
-#define CH_DBG_ENABLE_STACK_CHECK TRUE\r
-\r
-/**\r
- * @brief Debug option, stacks initialization.\r
- * @details If enabled then the threads working area is filled with a byte\r
- * value when a thread is created. This can be useful for the\r
- * runtime measurement of the used stack.\r
- *\r
- * @note The default is @p FALSE.\r
- */\r
-#define CH_DBG_FILL_THREADS TRUE\r
-\r
-/**\r
- * @brief Debug option, threads profiling.\r
- * @details If enabled then a field is added to the @p thread_t structure that\r
- * counts the system ticks occurred while executing the thread.\r
- *\r
- * @note The default is @p FALSE.\r
- * @note This debug option is not currently compatible with the\r
- * tickless mode.\r
- */\r
-#define CH_DBG_THREADS_PROFILING FALSE\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/**\r
- * @name Kernel hooks\r
- * @{\r
- */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Threads descriptor structure extension.\r
- * @details User fields added to the end of the @p thread_t structure.\r
- */\r
-#define CH_CFG_THREAD_EXTRA_FIELDS \\r
- /* Add threads custom fields here.*/\r
-\r
-/**\r
- * @brief Threads initialization hook.\r
- * @details User initialization code added to the @p chThdInit() API.\r
- *\r
- * @note It is invoked from within @p chThdInit() and implicitly from all\r
- * the threads creation APIs.\r
- */\r
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \\r
- /* Add threads initialization code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Threads finalization hook.\r
- * @details User finalization code added to the @p chThdExit() API.\r
- */\r
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \\r
- /* Add threads finalization code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Context switch hook.\r
- * @details This hook is invoked just before switching between threads.\r
- */\r
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \\r
- /* Context switch code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief ISR enter hook.\r
- */\r
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \\r
- /* IRQ prologue code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief ISR exit hook.\r
- */\r
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \\r
- /* IRQ epilogue code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle thread enter hook.\r
- * @note This hook is invoked within a critical zone, no OS functions\r
- * should be invoked from here.\r
- * @note This macro can be used to activate a power saving mode.\r
- */\r
-#define CH_CFG_IDLE_ENTER_HOOK() { \\r
- /* Idle-enter code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle thread leave hook.\r
- * @note This hook is invoked within a critical zone, no OS functions\r
- * should be invoked from here.\r
- * @note This macro can be used to deactivate a power saving mode.\r
- */\r
-#define CH_CFG_IDLE_LEAVE_HOOK() { \\r
- /* Idle-leave code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Idle Loop hook.\r
- * @details This hook is continuously invoked by the idle thread loop.\r
- */\r
-#define CH_CFG_IDLE_LOOP_HOOK() { \\r
- /* Idle loop code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief System tick event hook.\r
- * @details This hook is invoked in the system tick handler immediately\r
- * after processing the virtual timers queue.\r
- */\r
-#define CH_CFG_SYSTEM_TICK_HOOK() { \\r
- /* System tick event code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief System halt hook.\r
- * @details This hook is invoked in case to a system halting error before\r
- * the system is halted.\r
- */\r
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \\r
- /* System halt code here.*/ \\r
-}\r
-\r
-/**\r
- * @brief Trace hook.\r
- * @details This hook is invoked each time a new record is written in the\r
- * trace buffer.\r
- */\r
-#define CH_CFG_TRACE_HOOK(tep) { \\r
- /* Trace code here.*/ \\r
-}\r
-\r
-/** @} */\r
-\r
-/*===========================================================================*/\r
-/* Port-specific settings (override port settings defaulted in chcore.h). */\r
-/*===========================================================================*/\r
-\r
-#endif /* CHCONF_H */\r
-\r
-/** @} */\r
+++ /dev/null
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6464
-#define DEVICE_VER 0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/* at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER "TMK"
-#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00'
-#define PRODUCT "ChibiOS TMK test"
-#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00'
-#define DESCRIPTION "TMK keyboard firmware over ChibiOS"
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 1
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-/**\r
- * @file templates/halconf.h\r
- * @brief HAL configuration header.\r
- * @details HAL configuration file, this file allows to enable or disable the\r
- * various device drivers from your application. You may also use\r
- * this file in order to override the device drivers default settings.\r
- *\r
- * @addtogroup HAL_CONF\r
- * @{\r
- */\r
-\r
-#ifndef _HALCONF_H_\r
-#define _HALCONF_H_\r
-\r
-#include "mcuconf.h"\r
-\r
-/**\r
- * @brief Enables the PAL subsystem.\r
- */\r
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)\r
-#define HAL_USE_PAL TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the ADC subsystem.\r
- */\r
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)\r
-#define HAL_USE_ADC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the CAN subsystem.\r
- */\r
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)\r
-#define HAL_USE_CAN FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the DAC subsystem.\r
- */\r
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)\r
-#define HAL_USE_DAC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the EXT subsystem.\r
- */\r
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)\r
-#define HAL_USE_EXT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the GPT subsystem.\r
- */\r
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)\r
-#define HAL_USE_GPT FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the I2C subsystem.\r
- */\r
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)\r
-#define HAL_USE_I2C FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the I2S subsystem.\r
- */\r
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)\r
-#define HAL_USE_I2S FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the ICU subsystem.\r
- */\r
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)\r
-#define HAL_USE_ICU FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the MAC subsystem.\r
- */\r
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)\r
-#define HAL_USE_MAC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the MMC_SPI subsystem.\r
- */\r
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)\r
-#define HAL_USE_MMC_SPI FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the PWM subsystem.\r
- */\r
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)\r
-#define HAL_USE_PWM FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the RTC subsystem.\r
- */\r
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)\r
-#define HAL_USE_RTC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SDC subsystem.\r
- */\r
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)\r
-#define HAL_USE_SDC FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SERIAL subsystem.\r
- */\r
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)\r
-#define HAL_USE_SERIAL FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SERIAL over USB subsystem.\r
- */\r
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)\r
-#define HAL_USE_SERIAL_USB FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the SPI subsystem.\r
- */\r
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)\r
-#define HAL_USE_SPI FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the UART subsystem.\r
- */\r
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)\r
-#define HAL_USE_UART FALSE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the USB subsystem.\r
- */\r
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)\r
-#define HAL_USE_USB TRUE\r
-#endif\r
-\r
-/**\r
- * @brief Enables the WDG subsystem.\r
- */\r
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)\r
-#define HAL_USE_WDG FALSE\r
-#endif\r
-\r
-/*===========================================================================*/\r
-/* USB driver related settings. */\r
-/*===========================================================================*/\r
-\r
-/**\r
- * @brief Enables synchronous APIs.\r
- * @note Disabling this option saves both code and data space.\r
- */\r
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)\r
-#define USB_USE_WAIT TRUE\r
-#endif\r
-\r
-#endif /* _HALCONF_H_ */\r
-\r
-/** @} */\r
+++ /dev/null
-# Teensy LC, 3.0, 3.1, 3.2 support
-
-These ARM Teensies are now supported through [ChibiOS](http://chibios.org).
-
-You'll need to install an ARM toolchain, for instance from [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting.
-
-Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS). If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `tmk_core/tool/chibios/chibios` (so that the file `tmk_core/tool/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `tmk_core/tool/chibios/chibios-contrib`.
-
-(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.)
-
-(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.)
-
-This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
-
-For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`.
-
-## About this onekey example
-
-It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`.
-
-## Credits
-
-TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard).
-
-The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions.
-
-## Features that are not implemented yet
-
-Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome).
-
-# Matrix programming notes
-
-The notes below explain what commands can be used to examine and set the status of Teensy pins.
-
-## ChibiOS pin manipulation basics
-
-### Pins
-
-Each pin sits on a "port", each of which comprises at most 32 individual pins.
-So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number.
-
-Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number.
-
-### Mode
-
-A MCU pin can be in several modes. The basic command to set a pin mode is
-
- palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP);
-
-The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW).
-
-### Setting
-
-Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by
-
- palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-or set LOW by
-
- palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-Toggling can be done with
-
- palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-Alternatively, you can use
-
- palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit);
-
-where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`).
-
-### Reading
-
-Reading pin status is done with
-
- palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`).
-
-### Further docs
-
-All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html).
+++ /dev/null
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "host.h"
-#include "print.h"
-#include "debug.h"
-#include "keymap.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- {{KC_A}},
-}; // to test: KC_CAPS, KT_BTLD, KC_A
-
-const uint16_t fn_actions[] = {
-};
+++ /dev/null
-/*\r
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com\r
- * (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>\r
- *\r
- * Permission is hereby granted, free of charge, to any person obtaining\r
- * a copy of this software and associated documentation files (the "Software"),\r
- * to deal in the Software without restriction, including without limitation\r
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,\r
- * and/or sell copies of the Software, and to permit persons to whom the\r
- * Software is furnished to do so, subject to the following conditions:\r
- *\r
- * The above copyright notice and this permission notice shall be included in\r
- * all copies or substantial portions of the Software.\r
- *\r
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS\r
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\r
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\r
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\r
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\r
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\r
- * SOFTWARE.\r
- */\r
-\r
-/*\r
- * KL26Z64 memory setup.\r
- */\r
-MEMORY\r
-{\r
- flash0 : org = 0x00000000, len = 0x100\r
- flash1 : org = 0x00000400, len = 0x10\r
- flash2 : org = 0x00000410, len = 62k - 0x410\r
- flash3 : org = 0x0000F800, len = 2k\r
- flash4 : org = 0x00000000, len = 0\r
- flash5 : org = 0x00000000, len = 0\r
- flash6 : org = 0x00000000, len = 0\r
- flash7 : org = 0x00000000, len = 0\r
- ram0 : org = 0x1FFFF800, len = 8k\r
- ram1 : org = 0x00000000, len = 0\r
- ram2 : org = 0x00000000, len = 0\r
- ram3 : org = 0x00000000, len = 0\r
- ram4 : org = 0x00000000, len = 0\r
- ram5 : org = 0x00000000, len = 0\r
- ram6 : org = 0x00000000, len = 0\r
- ram7 : org = 0x00000000, len = 0\r
-}\r
-\r
-/* Flash region for the configuration bytes.*/\r
-SECTIONS\r
-{\r
- .cfmprotect : ALIGN(4) SUBALIGN(4)\r
- {\r
- KEEP(*(.cfmconfig))\r
- } > flash1\r
-}\r
-\r
-/* For each data/text section two region are defined, a virtual region\r
- and a load region (_LMA suffix).*/\r
-\r
-/* Flash region to be used for exception vectors.*/\r
-REGION_ALIAS("VECTORS_FLASH", flash0);\r
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);\r
-\r
-/* Flash region to be used for constructors and destructors.*/\r
-REGION_ALIAS("XTORS_FLASH", flash2);\r
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for code text.*/\r
-REGION_ALIAS("TEXT_FLASH", flash2);\r
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for read only data.*/\r
-REGION_ALIAS("RODATA_FLASH", flash2);\r
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for various.*/\r
-REGION_ALIAS("VARIOUS_FLASH", flash2);\r
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);\r
-\r
-/* Flash region to be used for RAM(n) initialization data.*/\r
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);\r
-\r
-/* RAM region to be used for Main stack. This stack accommodates the processing\r
- of all exceptions and interrupts.*/\r
-REGION_ALIAS("MAIN_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for the process stack. This is the stack used by\r
- the main() function.*/\r
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);\r
-\r
-/* RAM region to be used for data segment.*/\r
-REGION_ALIAS("DATA_RAM", ram0);\r
-REGION_ALIAS("DATA_RAM_LMA", flash2);\r
-\r
-/* RAM region to be used for BSS segment.*/\r
-REGION_ALIAS("BSS_RAM", ram0);\r
-\r
-/* RAM region to be used for the default heap.*/\r
-REGION_ALIAS("HEAP_RAM", ram0);\r
-\r
-__eeprom_workarea_start__ = ORIGIN(flash3);\r
-__eeprom_workarea_size__ = LENGTH(flash3);\r
-__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;\r
-\r
-/* Generic rules inclusion.*/\r
-INCLUDE rules.ld\r
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-
-#include "led.h"
-
-
-void led_set(uint8_t usb_led) {
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // output high
- palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
- } else {
- // Hi-Z
- palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT);
- }
-}
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-#define LED_ON() do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0)
-#define LED_OFF() do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
-#define LED_TGL() do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
-
-void matrix_init(void)
-{
- // initialize row and col
- unselect_rows();
- init_cols();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- //debug
- debug_matrix = true;
- LED_ON();
- wait_ms(500);
- LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- select_row(i);
- wait_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i] != cols) {
- matrix_debouncing[i] = cols;
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); debug("\n");
- }
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- wait_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-/* Column pin configuration
- */
-static void init_cols(void)
-{
- // internal pull-up
- palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP);
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
- return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0));
- // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
-}
-
-/* Row pin configuration
- */
-static void unselect_rows(void)
-{
- palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z
-}
-
-static void select_row(uint8_t row)
-{
- (void)row;
- // Output low to select
- switch (row) {
- case 0:
- palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL);
- palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5);
- break;
- }
-}
+++ /dev/null
-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-#define KL2x_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#if 1\r
-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */\r
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE\r
-#define KINETIS_PLLCLK_FREQUENCY 96000000UL\r
-#define KINETIS_SYSCLK_FREQUENCY 48000000UL\r
-#endif\r
-\r
-#if 0\r
-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */\r
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI\r
-#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */\r
-#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */\r
-#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */\r
-#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */\r
-#endif\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define KINETIS_SERIAL_USE_UART0 TRUE\r
-\r
-/*\r
- * USB driver settings\r
- */\r
-#define KINETIS_USB_USE_USB0 TRUE\r
-/* Need to redefine this, since the default is for K20x */\r
-/* This is for Teensy LC; you should comment it out (or change to 5)\r
- * for Teensy 3.x */\r
-#define KINETIS_USB_USB0_IRQ_PRIORITY 2\r
-\r
-#endif /* _MCUCONF_H_ */\r
+++ /dev/null
-#include "teensy_lc_onekey.h"
+++ /dev/null
-#ifndef TEENSY_LC_ONEKEY_H
-#define TEENSY_LC_ONEKEY_H
-#include "quantum.h"
-#endif
projects / qmk_firmware.git / commitdiff
