@code{\mp}, @code{\mf}, @code{\f}, @code{\ff}, @code{\fff},
@code{\ffff}, @code{\fp}, @code{\sf}, @code{\sff}, @code{\sp},
@code{\spp}, @code{\sfz}, and @code{\rfz}. The dynamic marks may
-be manually placed above or below the staff, see
+be manually placed above or below the staff, see
@ref{Direction and placement}.
@lilypond[verbatim,quote,relative=2]
Notation Reference:
@ref{Direction and placement},
-@ref{New dynamic marks}.
+@ref{New dynamic marks},
+@ref{What goes into the MIDI output?},
+@ref{Controlling MIDI dynamics}.
Snippets:
@rlsr{Expressive marks}.
in @ref{Formatting text}.
@lilypond[verbatim,quote]
-roundf = \markup { \center-align { \line { \bold { \italic ( }
- \dynamic f \bold { \italic ) } } } }
-boxf = \markup { \bracket { \dynamic f } }
+roundF = \markup { \hcenter \concat { \bold { \italic ( }
+ \dynamic f \bold { \italic ) } } }
+boxF = \markup { \bracket { \dynamic f } }
\relative c' {
- c1_\roundf
- c1_\boxf
+ c1_\roundF
+ c1_\boxF
}
@end lilypond
-By default, markup objects are aligned to the left side of a note
-head, but authentic dynamic marks are always centered on the note
-head. New, centered dynamic marks can be created using the
-following function:
-
@cindex make-dynamic-script
+Simple, centered dynamic marks are easily created with the
+@code{make-dynamic-script} function. The dynamic font only
+contains the characters @code{f,m,p,r,s} and @code{z}.
+
@lilypond[verbatim,quote]
sfzp = #(make-dynamic-script "sfzp")
\relative c' {
}
@end lilypond
-@noindent
-The dynamic font only contains the characters @code{f,m,p,r,s} and
-@code{z}. In order to use other font families, it is necessary to
-use markup mode in its Scheme form, as explained in
-@ref{Markup construction in Scheme}.
+In general, @code{make-dynamic-script} takes any markup object as
+its argument. In the following example, using
+@code{make-dynamic-script} ensures the vertical alignment of
+markup objects and hairpins that are attached to the same note
+head.
+
+@lilypond[verbatim,quote]
+roundF = \markup { \hcenter \concat {
+ \normal-text { \bold { \italic ( } }
+ \dynamic f
+ \normal-text { \bold { \italic ) } } } }
+boxF = \markup { \bracket { \dynamic f } }
+roundFdynamic = #(make-dynamic-script roundF)
+boxFdynamic = #(make-dynamic-script boxF)
+\relative c' {
+ c4_\roundFdynamic\< d e f
+ g,1_\boxFdynamic
+}
+@end lilypond
+
+The Scheme form of markup mode may be used instead. Its syntax is
+explained in @ref{Markup construction in Scheme}.
@lilypond[verbatim,quote]
-moltoF = #(make-dynamic-script (markup
- #:normal-text "molto"
- #:dynamic "f"))
+moltoF = #(make-dynamic-script
+ (markup #:normal-text "molto"
+ #:dynamic "f"))
\relative c' {
<d e>16 <d e>
<d e>2..\moltoF
}
@end lilypond
-@noindent
Font settings in markup mode are described in
@ref{Common markup commands}.
Notation Reference:
@ref{Formatting text},
@ref{Common markup commands},
-@ref{Markup construction in Scheme}.
+@ref{Markup construction in Scheme},
+@ref{What goes into the MIDI output?},
+@ref{Controlling MIDI dynamics}.
Snippets:
@rlsr{Expressive marks}.
Music Glossary:
@rglos{slur}.
+Learning Manual:
+@rlearning{On the un-nestedness of brackets and ties}.
+
Notation Reference:
@ref{Direction and placement},
@ref{Phrasing slurs}.
@seealso
+Learning Manual:
+@rlearning{On the un-nestedness of brackets and ties}.
+
Notation Reference:
@ref{Direction and placement}.
@code{\trill}; see @ref{Articulations and ornamentations}.
Longer trills with an extender line are made with
-@code{\startTrillSpan} and @code{\stopTrillSpan}. In the
-following example, the trill is combined with grace notes. To
-achieve precise control over the placement of the grace notes, see
-@ref{Grace notes}.
+@code{\startTrillSpan} and @code{\stopTrillSpan}:
+
+@lilypond[verbatim,quote,relative=2]
+d1~\startTrillSpan
+d1
+c2\stopTrillSpan r2
+@end lilypond
+
+In the following example, a trill is combined with grace notes.
+The syntax of this construct and the method to precisely position
+the grace notes are described in @ref{Grace notes}.
@lilypond[verbatim,quote,relative=2]
c1 \afterGrace
argument is the main note, and the second is the @emph{trilled}
note, printed as a stemless note head in parentheses.
-@c This syntax example doesn't look nice. -pm
-
-@c @example
-@c @code{\pitchedTrill} @var{mainnote} @code{\startTrillSpan}
-@c @var{trillnote} @var{endnote} @code{\stopTrillSpan}
-@c @end example
-
@lilypond[verbatim,quote,relative=1]
\pitchedTrill e2\startTrillSpan fis
d\stopTrillSpan
performance marks to single staves.
@menu
-* Displaying staves::
-* Modifying single staves::
-* Writing parts::
+* Displaying staves::
+* Modifying single staves::
+* Writing parts::
@end menu
@node Displaying staves
@subsection Displaying staves
-This section shows the different possibilities to create and group
-staves into groups, which can be marked in the beginning of each
-line with either a bracket or a brace.
+This section shows the different possibilities of creating and
+grouping staves, which are marked at the beginning of each line
+with either a bracket or a brace.
@menu
* Instantiating new staves::
-* Grouping staves::
-* Deeper nested staff groups::
+* Grouping staves::
+* Deeper nested staff groups::
@end menu
@node Instantiating new staves
@cindex tabstaff
@cindex tablature
-Staves (sg. staff) are created with the @code{\new} or
-@code{\context} commands. For an explanation on these commands,
-see @ref{Creating contexts}.
+@notation{Staves} (singular: @notation{staff}) are created with
+the @code{\new} or @code{\context} commands. For details, see
+@ref{Creating contexts}.
-There are different predefined staff contexts available in
-LilyPond:
-
-@itemize
-@item
-The default is @code{Staff}:
+The basic staff context is @code{Staff}:
@lilypond[verbatim,quote,relative=2]
\new Staff { c4 d e f }
@end lilypond
-@item
-@code{DrumStaff} creates a five line staff set up for a typical
-drum set. It uses different names for each instrument. The
-instrument names have to be set using the @code{drummode}. See
-@ref{Percussion staves}.
+@code{DrumStaff} creates a five-line staff set up for a
+typical drum set. It uses different names for each instrument.
+The instrument names are set using the @code{\drummode} command.
+For details, see @ref{Percussion staves}.
@lilypond[verbatim,quote]
-\new DrumStaff {
+\new DrumStaff {
\drummode { cymc hh ss tomh }
}
@end lilypond
@c FIXME: remove when mentioned in NR 2.8
-@item
-@code{GregorianTranscriptionStaff} sets up a staff to notate
+@code{GregorianTranscriptionStaff} creates a staff to notate
modern Gregorian chant. It does not show bar lines.
@lilypond[verbatim,quote,relative=2]
\new GregorianTranscriptionStaff { c4 d e f }
@end lilypond
-@item
-@code{RhythmicStaff} can be used to show the rhythm of some music.
-The notes are printed on one line regardless of their pitch, but
-the duration is preserved. See @ref{Showing melody rhythms}.
+@code{RhythmicStaff} creates a single-line staff that only
+displays the rhythmic values of the input. Real durations are
+preserved. For details, see @ref{Showing melody rhythms}.
@lilypond[verbatim,quote,relative=2]
\new RhythmicStaff { c4 d e f }
@end lilypond
-@item
-@code{TabStaff} creates by default a tablature with six strings in
-standard guitar tuning. See @ref{Default tablatures}.
+@code{TabStaff} creates a tablature with six strings in standard
+guitar tuning. For details, see @ref{Default tablatures}.
@lilypond[verbatim,quote,relative=2]
\new TabStaff { c4 d e f }
@end lilypond
-@end itemize
+There are two staff contexts specific for the notation of ancient
+music: @code{MensuralStaff} and @code{VaticanaStaff}. They are
+described in @ref{Pre-defined contexts}.
-@noindent
-Besides these staves there are two staff contexts specific for the
-notation of ancient music: @code{MensuralStaff} and
-@code{VaticanaStaff}. They are described in @ref{Pre-defined
-contexts}.
-
-Once a staff is instantiated it can be started or stopped at every
-point in the score. This is done with the commands
-@code{\startStaff} and @code{\stopStaff}. How to use it is
-explained in @ref{Staff symbol}.
+Staves can be started or stopped at any point in the score. The
+commands @code{\startStaff} and @code{\stopStaff} are used for
+this purpose. For details, see @ref{Staff symbol}.
@seealso
Notation Reference:
@ref{Creating contexts},
-@ref{Percussion staves},
+@ref{Percussion staves},
@ref{Default tablatures},
@ref{Gregorian chant contexts},
@ref{Mensural contexts},
@cindex system start delimiters
@cindex bracket, vertical
@cindex brace, vertical
+@cindex choir staff
@cindex grand staff
@cindex piano staff
@cindex staff group
@cindex staff, choir
-@cindex choir staff
+@cindex staff, piano
@cindex system
-LilyPond provides different types of contexts to group single
-staves together. These contexts influence in the first place the
-appearance of the system start delimiter, but they have also
-influence on the behavior of the bar lines.
+Various contexts exist to group single staves together in order to
+form multi-stave systems. Each grouping context sets the style of
+the system start delimiter and the behavior of bar lines.
-@itemize
-@item
-If no context is specified, the default properties for the score
-will be used: the group is started with a vertical line, and the
-bar lines are not connected. The name of the beginning bar line
-grob is @code{SystemStartBar}.
+If no context is specified, the default properties will be used:
+the group is started with a vertical line, and the bar lines are
+not connected.
@lilypond[verbatim,quote,relative=2]
<<
>>
@end lilypond
-@item
-In a @code{StaffGroup}, the bar lines will be drawn through all
-the staves, and the group is started with a bracket.
+In the @code{StaffGroup} context, the group is started with a
+bracket and bar lines are drawn through all the staves.
@lilypond[verbatim,quote,relative=2]
\new StaffGroup <<
>>
@end lilypond
-@item
-In a @code{ChoirStaff}, the group is started with a bracket, but
-bar lines are not connected.
+In a @code{ChoirStaff}, the group starts with a bracket, but bar
+lines are not connected.
@lilypond[verbatim,quote,relative=2]
\new ChoirStaff <<
>>
@end lilypond
-@item
-In a @code{GrandStaff}, the group is started with a brace at the
-left, and bar lines are connected between the staves.
+In a @code{GrandStaff}, the group begins with a brace, and bar
+lines are connected between the staves.
@lilypond[verbatim,quote,relative=2]
\new GrandStaff <<
>>
@end lilypond
-@item
-The @code{PianoStaff} behaves almost as the @code{GrandStaff} but
-is optimized for setting piano music. In particular it supports
-the printing of an instrument name directly, see @ref{Instrument
-names}.
+The @code{PianoStaff} is almost identical to a @code{GrandStaff},
+except that it supports printing the instrument name directly.
+For details, see @ref{Instrument names}.
@lilypond[verbatim,quote,relative=2]
\new PianoStaff <<
+ \set PianoStaff.instrumentName = "Piano"
\new Staff { c1 c }
\new Staff { c1 c }
>>
@end lilypond
-@end itemize
-
Each staff group context sets the property
-@code{systemStartDelimiter} to one of the values
-@code{SystemStartBar}, @code{SystemStartBrace}, and
+@code{systemStartDelimiter} to one of the following values:
+@code{SystemStartBar}, @code{SystemStartBrace}, or
@code{SystemStartBracket}. A fourth delimiter,
-@code{systemStartSquare}, is also available, but must be
-instantiated manually. The usage of this last delimiter is shown
-further down in the snippet section.
-
-According to classic engraver rules an orchestral score consists
-of staves connected only with a single line at the beginning of
-the system. In LilyPond this is produced grouping the
-@code{Staff} contexts with @code{<< ... >>}.
-
-Each instrument family is grouped inside of a @code{StaffGroup}
-with a starting bracket. A group of same instruments or an
-instrument using more than one staff is grouped with braces in a
-@code{GrandStaff}.
-
-As the context names tell, @code{PianoStaff} is used for notating
-piano music and @code{ChoirStaff} for all kind of vocal ensemble
-music.
+@code{SystemStartSquare}, is also available, but it must be
+explicitly specified.
@snippets
@seealso
Music Glossary:
-@rglos{brace},
+@rglos{brace},
@rglos{bracket},
@rglos{grand staff}.
@rinternals{Staff},
@rinternals{ChoirStaff},
@rinternals{GrandStaff},
-@rinternals{PianoStaff},
+@rinternals{PianoStaff},
@rinternals{StaffGroup},
-@rinternals{systemStartDelimiter},
@rinternals{SystemStartBar},
@rinternals{SystemStartBrace},
@rinternals{SystemStartBracket},
-@rinternals{systemStartSquare}.
+@rinternals{SystemStartSquare}.
@node Deeper nested staff groups
@unnumberedsubsubsec Deeper nested staff groups
-There are also two inner staff contexts named
-@code{InnerStaffGroup} and @code{InnerChoirStaffGroup} besides the
-grouping contexts mentioned in @ref{Grouping staves}. They behave
-in the same way as their simple counterparts, except that they are
-contained in another staff grouping context, thus producing one
-more bracket on top of the existing one. Note that
-@code{GrandStaff} and @code{PianoStaff} do not have any inner
-grouping contexts. They can both be inside any other staff
-context, including inner staff groups, though.
-
-Here is an example of an orchestral score using groupings and
-nesting of these groupings. Note that the instrument names are
-omitted from the source code, for instructions how to set them see
-@ref{Instrument names}.
-
@cindex staff, nested
@cindex staves, nested
@cindex nesting of staves
@cindex inner staff group
@cindex inner choir staff group
-@example
-\score @{
-\relative c' <<
- \new StaffGroup %woodwinds
- <<
- \new Staff @{ c1 d @} %flute
- \new InnerStaffGroup <<
- \new Staff @{ c1 d @} %sax
- \new Staff @{ c1 d @} %oboe
- \new Staff @{ c1 d @} %English horn
- >>
- \new Staff @{ \clef bass c,1 d @} %bassoon
- >>
- \new StaffGroup %the brass group
- <<
- \new Staff @{ c'1 d @} %trumpet
- \new Staff @{ \clef bass c,1 d @} %trombone
- \new GrandStaff %the horns need a GrandStaff (same instrument)
- <<
- \new Staff @{ c'1 d @}
- \new Staff @{ \clef bass c,1 d @}
- >>
- >>
- \new ChoirStaff %for setting vocal music
- <<
- \new Staff @{ c'1 d @}
- \new InnerChoirStaff <<
- \new Staff @{ c1 d @}
- \new Staff @{ c1 d @}
- >>
- \new Staff @{ c1 d @}
- >>
- \new PianoStaff %for the piano
- <<
- \new Staff @{ c1 d @}
- \new Staff @{ \clef bass c,1 d @}
- >>
->> @}
-@end example
+Two additional staff-group contexts are available that can be
+nested within a @code{StaffGroup} or @code{ChoirStaff} context:
+@code{InnerStaffGroup} and @code{InnerChoirStaff}. These contexts
+create an additional bracket next to the original bracket of their
+parent staff group.
-@c no verbatim so instrument names are only in the music
-@lilypond[quote]
-\score {
-\relative c' <<
- \new StaffGroup %woodwinds
- <<
- \new Staff { \set Staff.instrumentName = "fl" c1 d } %flute
+An @code{InnerStaffGroup} is treated similarly to a
+@code{StaffGroup}; bar lines are connected between each stave
+within the context:
+
+@lilypond[verbatim,quote,relative=2]
+\new StaffGroup <<
+ \new Staff { c2 c }
\new InnerStaffGroup <<
- \new Staff { \set Staff.instrumentName = "sax" c1 d } %sax 1
- \new Staff { \set Staff.instrumentName = "ob" c1 d } %sax 2
- \new Staff { \set Staff.instrumentName = "ca" c1 d }
- >>
- \new Staff { \set Staff.instrumentName = "bs" \clef bass c,1 d } %bassoon
- >>
- \new StaffGroup %the brass group
- <<
- \new Staff { \set Staff.instrumentName = "tr" c'1 d } %trumpet
- \new Staff { \set Staff.instrumentName = "tb" \clef bass c,1 d } %trombone
- \new GrandStaff %the horns need a GrandStaff (same instrument)
- <<
- \new Staff { \set Staff.instrumentName = "cor1" c'1 d }
- \new Staff { \set Staff.instrumentName = "cor2" \clef bass c,1 d }
- >>
+ \new Staff { g2 g }
+ \new Staff { e2 e }
>>
- \new ChoirStaff %for setting vocal music
- <<
- \new Staff { \set Staff.instrumentName = "S" c'1 d }
- \new InnerChoirStaff <<
- \new Staff { \set Staff.instrumentName = "A1" c1 d }
- \new Staff { \set Staff.instrumentName = "A2" c1 d }
- >>
- \new Staff { \set Staff.instrumentName = "T" c1 d }
- >>
- \new PianoStaff %for the piano
- <<
- \new Staff { c1 d }
- \new Staff { \clef bass c,1 d }
+>>
+@end lilypond
+
+Bar lines are @emph{not} connected between staves of an
+@code{InnerChoirStaff}, just like a @code{ChoirStaff}:
+
+@lilypond[verbatim,quote,relative=2]
+\new ChoirStaff <<
+ \new Staff { c2 c }
+ \new InnerChoirStaff <<
+ \new Staff { g2 g }
+ \new Staff { e2 e }
>>
->> }
+ \new Staff { c1 }
+>>
@end lilypond
@ref{Instrument names}.
Internals Reference:
-@rinternals{InnerChoirStaffGroup},
@rinternals{InnerStaffGroup},
-@rinternals{SystemStartBar},
+@rinternals{StaffGroup},
+@rinternals{InnerChoirStaff},
+@rinternals{ChoirStaff},
+@rinternals{SystemStartBar},
@rinternals{SystemStartBrace},
-@rinternals{SystemStartBracket},
-@rinternals{systemStartDelimiterHierarchy}.
+@rinternals{SystemStartBracket}.
@node Modifying single staves
@subsection Modifying single staves
This section explains how to change specific attributes of one
-staff like the staff lines, starting and stopping of staves,
-sizing of staves, and setting ossia sections.
+staff: for example, modifying the number of staff lines or the
+staff size. Methods to start and stop staves and set ossia
+sections are also described.
@menu
-* Staff symbol::
-* Ossia staves::
-* Hiding staves::
+* Staff symbol::
+* Ossia staves::
+* Hiding staves::
@end menu
+
@node Staff symbol
@unnumberedsubsubsec Staff symbol
@cindex spacing of ledger lines
@cindex number of staff lines
-The layout object which draws the lines of a staff is called
-@code{staff symbol}. The staff symbol may be tuned in number,
-thickness and distance of lines, using properties. It may also be
-started and stopped at every point in the score.
+The grob @code{StaffSymbol} is responsible for drawing the lines
+of a staff. Its properties can be altered in order to change the
+appearance of a staff, but they must be changed before the staff
+is created. A staff may be started or stopped at any point in the
+score.
-@itemize
-@item
-Changing the number of staff lines is done by overriding
-@code{line-count}. You may need to adjust the clef position and
-the position of the middle C to fit to the new staff. For an
-explanation, see the snippet section in @ref{Displaying pitches}.
+The number of staff lines may be changed. The clef position and
+the position of middle C may need to be modified to fit the new
+staff. For an explanation, refer to the snippet section in
+@ref{Clef}.
@lilypond[verbatim,quote,relative=2]
\new Staff {
}
@end lilypond
-@item
-The placement and amount of the staff lines can also set totally
-manually by defining their positions explicitly. The middle of
-the staff has the value of 0, each half staff space up and down
-adds an integer. The default values are 4 2 0 -2 -4. Bar lines
-are drawn according to the calculated width of the system, but
-they are always centered. As the example shows, the positions of
-the notes are not influenced by the position of the staff lines.
+The vertical position of staff lines and the number of staff lines
+can be defined at the same time. As the example shows, the
+positions of the notes are not influenced by the position of the
+staff lines. Details for modifying this property are found in
+@rinternals{staff-symbol-interface}.
+
+@warning{The @code{'line-positions} property overrides the
+@code{'line-count} property. The number of staff lines is
+implicitly defined by the number of elements in the list of values
+for @code{'line-positions}}
@lilypond[verbatim,quote,relative=1]
\new Staff \with {
{ a4 e' f b | d1 }
@end lilypond
-@item
-The staff line thickness can be set by overriding the
-@code{thickness} property. Note that it gets applied also to
-ledger lines and stems, since they depend on the staff line
-thickness. The argument of @code{thickness} is a factor of
-@code{line-thickness} which defaults to the normal staff line
+The staff line thickness can be modified. The thickness of ledger
+lines and stems are also affected, since they depend on staff line
thickness.
@lilypond[verbatim,quote,relative=1]
\new Staff \with {
\override StaffSymbol #'thickness = #3
}
-{ d4 d d d }
+{ e4 d c b }
@end lilypond
-@item
-The thickness of the ledger lines can also be set independent of
-the settings for staff lines. The setting is calculated from a
-pair of values which will be added for the final thickness. The
-first value is the staff line thickness multiplied by a factor,
-the second is the staff space multiplied by a factor. In the
-example the ledger lines get their thickness from one staff line
-thickness plus 1/5 staff space, so they are heavier than a normal
-staff line.
+The thickness of ledger lines can be set independently of staff
+line thickness. A description of this property is also found in
+@rinternals{staff-symbol-interface}.
@lilypond[verbatim,quote,relative=1]
\new Staff \with {
\override StaffSymbol #'ledger-line-thickness = #'(1 . 0.2)
}
-{ d4 d d d }
+{ e4 d c b }
@end lilypond
-@item
-The distance of the stafflines can be changed with the
-@code{staff-space} property. Its argument is the amount of staff
-spaces that should be inserted between the lines. The default
-value is 1. Setting the distance has influence on the staff lines
-as well as on ledger lines.
+The distance between staff lines can be changed. The setting has
+influence on ledger lines as well.
@lilypond[verbatim,quote,relative=1]
\new Staff \with {
{ a4 b c d }
@end lilypond
-@item
-The length of the staff line can also be adjusted manually. The
-unit is one staff space. Spacing of the objects inside the staff
-does not get influenced by this setting.
+The width of a staff can be adjusted. The unit is one staff
+space. The spacing of objects inside the staff is not influenced
+by this setting.
@lilypond[verbatim,quote,relative=1]
\new Staff \with {
{ a4 e' f b | d1 }
@end lilypond
-@end itemize
-
-These properties can only be set before instantiating the staff
-symbol. But it is possible to start and stop staves in the middle
-of a score, so each new setting will be applied to the newly
-instantiated staff.
+Modifications to staff properties in the middle of a score can be
+placed between @code{\stopStaff} and @code{\startStaff}:
@lilypond[verbatim,quote,relative=2]
-b4 b
-%Set here the overrides for the staff
-\override Staff.StaffSymbol #'line-count = 2
-\stopStaff \startStaff
-b b
-%Revert to the default
+c2 c
+\stopStaff
+\override Staff.StaffSymbol #'line-count = #2
+\startStaff
+b2 b
+\stopStaff
\revert Staff.StaffSymbol #'line-count
-\stopStaff \startStaff
-b b
+\startStaff
+a2 a
@end lilypond
-
+
@predefined
@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{making-some-staff-lines-thicker-than-the-others.ly}
+
@seealso
Music Glossary:
@ref{Displaying pitches}.
Internals Reference:
-@rinternals{StaffSymbol}.
+@rinternals{StaffSymbol},
+@rinternals{staff-symbol-interface}.
+
@knownissues
}
@end lilypond
-@noindent
This involves shrinking the staff spaces, the staff lines and the
font size by the factor 3. You find a more precise explanation in
@ref{Setting the staff size}.
s2
\startStaff
- f8 d g4
+ f8 d g4
}
\new Staff \relative c'' {
\time 2/4
@snippets
-@c @lilypondfile[verbatim,lilyquote,texidoc,doctitle]
-@c {making-some-staff-lines-thicker-than-the-others.ly}
-@c snippet 277
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+{vertically-aligning-ossias-and-lyrics.ly}
@seealso
@rglos{staff},
@rglos{Frenched staff}.
+Learning Manual:
+@rlearning{Nesting music expressions},
+@rlearning{Size of objects},
+@rlearning{Length and thickness of objects}.
+
Notation Reference:
@ref{Setting the staff size}.
@cindex Frenched scores
@cindex staff, hiding
-@cindex staff, empty
+@cindex staff, empty
@cindex hiding of staves
@cindex empty staves
@cindex Frenched staves
<<
\new Staff { e4 f g a \break c1 }
\new Staff { c4 d e f \break R1 }
- >>
+ >>
}
@end lilypond
@cindex ossia
+@c FIXME Really? I need to see about this. -pm
+
Another application of the @code{\RemoveEmptyStaffContext} is to
make ossia sections, i.e., alternative melodies on a separate
piece of staff, with help of a Frenched staff. See
-@ref{Ossia staves}.
+@ref{Ossia staves}.
+
+@c FIXME Is this in the right section?
+@c maybe move to Staff symbol -pm
You can make the staff lines invisible by removing the
@code{Staff_symbol_engraver} from the @code{Staff} context.
@lilypond[verbatim,quote]
\layout {
- \context {
- \RemoveEmptyStaffContext
+ \context {
+ \RemoveEmptyStaffContext
%To use the setting globally, uncomment the following line:
%\override VerticalAxisGroup #'remove-first = ##t
}
}
\new StaffGroup
\relative c'' <<
- \new Staff {
+ \new Staff {
e4 f g a \break c1 }
\new Staff {
%To use the setting globally, comment this line, uncomment the line above
@subsection Writing parts
@menu
-* Metronome marks::
-* Instrument names::
-* Quoting other voices::
-* Formatting cue notes::
+* Metronome marks::
+* Instrument names::
+* Quoting other voices::
+* Formatting cue notes::
@end menu
@node Metronome marks
@unnumberedsubsubsec Metronome marks
-@cindex Tempo
+@cindex tempo
@cindex beats per minute
@cindex metronome marking
) }
@end lilypond
-@noindent
For more details, see @ref{Formatting text}.
@rglos{metronome mark}.
Notation Reference:
-@ref{Formatting text}.
+@ref{Formatting text},
+@ref{MIDI output}.
Snippets:
@rlsr{Staff notation}.
Internals Reference:
-@rinternals{MetronomeMark},
-@ref{MIDI output}.
+@rinternals{MetronomeMark}.
@knownissues
c''1
@end lilypond
-You can also use markup texts to construct more complicated
-instrument names, for example
+Markup mode can be used to create more complicated instrument
+names:
@lilypond[verbatim,quote,relative=2]
\set Staff.instrumentName = \markup {
@cindex instrument names, changing
-Instrument names may be changed in the middle of a piece,
+Instrument names may be changed in the middle of a piece:
@lilypond[verbatim,quote,relative=1]
\set Staff.instrumentName = "First"
@cindex cue notes
@cindex cue notes, formatting
@cindex fragments
-@cindex quoting other voices
+@cindex quoting other voices
@cindex cues, formatting
The previous section deals with inserting notes from another