make room for those voices, their notes have to be stemmed in opposite
directions.
-Printed symbols are internally represented by so-called Graphical
-Objects (more colloquially: Grobs). These statements concern the
-grob called `Stem'. Each grob is described by a bunch of settings. These
-setting determine the fonts, offsets, sub-routines to be called on the
-grob, etc. The initial values of these settings are set in the Scheme
-file @file{scm/grob-description.scm}.
-
-@separate
-@example
- stemDown = \property Voice.Stem \override #'direction = #-1
-@end example
-
-Set a property for all Stem grobs in the current Voice:
-@code{direction} is set to @code{-1}, which encodes down. The setting
-remains in effect until it is reverted.
-
-@separate
-@example
- \property Voice.Stem \revert #'direction
-@end example
-
-Revert the to the previous setting. The effect of precisely one
-@code{\stemDown} or @code{\stemUp} is neutralized.
-
-
LilyPond includes the identifiers @code{\stemUp}, @code{\stemDown} along
with some other commonly used formatting instructions, but to explain how
it works, we wrote our own here. Of course, you should use predefined
@separate
@example
-<c4-\f-\arpeggio g' c>
+<c4-\arpeggio g' c>
@end example
The delimiters @code{<} and @code{>} are shorthands for
@code{\simultaneous @{} and @code{@}}. The expression enclosed in
@code{<} and @code{>} is a chord.
-@cindex dynamics
-@cindex loudness
-@cindex forte
@cindex arpeggio
-@code{\f} places a forte symbol under the chord. The forte applies to
-the whole chord, but the syntax requires that commands like forte and
-arpeggio are attached to a note, so here we attach them to the first
-note.
-
@code{\arpeggio} typesets an arpeggio sign (a wavy vertical line) before
the chord.
@separate
@example
- \stemDown
+ \voiceTwo
@end example
+We want the viola to have stems down, and have all the other
+characteristics of a second voice. This is enforced using the
+@code{\voiceTwo} command: it inserts instructions that makes stem,
+ties, slurs, etc. go down.
+
+
@separate
@example
@code{\context}.
@separate
@example
-\stemUp s4 g8. b,16 c8 r <e'8.-\p g> <f16 a>
-@end example
-@code{\stemUp} is a reference to the @code{\property \override} command
-defined above.
+\voiceOne s4 g8. b,16 c8 r <e'8. g> <f16 a>
+@end example
+
+The oboes should have stems up, so they should have stems up, to keep
+them from interfering with the staff-jumping bass figure.
+
@separate
@example
-\grace <e8 g> < d4 f> <c2 e>
+\grace <e8( g> < d4 )f> <c2 e>
@end example
@cindex @code{\grace}
@cindex ornaments
@cindex grace notes
@code{\grace} introduces grace notes. It takes one argument, in this
-case a chord.
+case a chord. A slur is introduced starting from the @code{\grace}
+ending on the following chord.
-@ignore
-The slur started on the @code{e} of the chord
-will be attached to the next note.@footnote{LilyPond will squirm
-about unended Slurs. In this case, you can ignore the warning}.
-@end ignore
@separate
@example
\times 2/3
of their notated duration, so in this case the fraction is 2/3.
@separate
@example
-@{ <d8 \< f> <e g> <f a> @}
+@{ <d8 f> <e g> <f a> @}
@end example
The piece of music to be `tripletted' is sequential music containing
-three notes. On the first chord, a crescendo is started with
-@code{\<}. To be precise, the crescendo start is syntactically attached
-to the preceding note, the @code{d}.
-
-@cindex dynamics
-@cindex crescendo
-@cindex @code{\<}
+three chords.
@separate
@example
voice, which continues with upward stems:
@separate
@example
- @{ \times 2/3 @{ a8 g c @} \! c2 @}
+ @{ \times 2/3 @{ a8 g c @} c2 @}
@end example
-@cindex @code{\!}
-
-The crescendo is ended at the half note by the escaped exclamation
-mark @code{\!}.
-@separate
-@example
-\context Voice = oboeTwo @{
-\stemDown
-@end example
-We can't share stems with the other voice, so we have to create a new
-@code{Voice} context. We give it the name @code{oboeTwo} to distinguish
-it from the other context. Stems go down in this voice.
@separate
-@example
-\grace
+@example
+\\
@end example
-@cindex Grace context
-When a grace section is processed, a @code{Grace} context is
-created. This context acts like a miniature score of its own. It has
-its own time bookkeeping, and you can make notes, beams, slurs
-etc. Here we fiddle with a property and make a beam. The argument of
-@code{\grace} is sequential music.
-
-@separate
-@example
- \property Voice.Stem \override #'direction = #-1
- [f,16 g]
- \property Voice.Stem \revert #'direction
-@end example
-
-Normally, grace notes are always stem up, but in this case, the upper
-voice interferes, so we set the stems down here.
+The easiest way to enter multiple voices is demonstrated
+here. Separate the components of the voice (single notes or entire
+sequences) with @code{\\} in a simultaneous music expression. The
+@code{\\} separators split first voice, second voice, third voice, and
+so on.
As far as relative mode is concerned, the previous note is the
@code{c'''2} of the upper voice, so we have to go an octave down for
@separate
@example
- f8 e e2
+ f,8 e e2
@} >
@end example
This ends the two-part section.
is the to-be-transposed music. As you can see, in this case, the
transposition has no effect, as central C stays at central C.
-The purpose of this no-op is circumventing relative mode. Relative mode
-can not be used together with transposition, so @code{\relative} will
-leave the contents of @code{\hoomPah} alone. We can use it without
-having to worry about getting the motive in a wrong octave.
+The purpose of this no-op is to protect it from being interpreted as
+relative notes. Relative mode can not be used together with
+transposition, so @code{\relative} will leave the contents of
+@code{\hoomPah} alone. We can use it without having to worry about
+getting the motive in a wrong octave.
+@separate
+@cindex staff switch, manual
+@cindex cross staff voice, manual
+@cindex @code{\translator}
+
+@example
+ \translator Staff = down
+ \stemUp
+ c8
+ \translator Staff = up
+ \stemDown
+ c'8 }
+@end example
+Voices can switch between staves. Here you see two staff switching
+commands. The first one moves to the lower staff, the second one to
+the lower one. If you set stem directions explicitly (using the
+identifiers @code{\stemUp} and @code{\stemDown}.
+
@separate
@example
bassvoices = \notes \relative c' @{
c4 g8. b,16
\autochange Staff \hoomPah \context Voice
@end example
-@cindex staff switch, automatic
-@cindex cross staff voice, automatic
-@cindex @code{\autochange}
-Voices can switch between staves. The easiest way to get this, is to use
-@code{\autochange}. This command looks at the pitch of each note, and if
-necessary, will cross to the other staff. For this to work, the two
-staves must be called @code{"up"} and @code{"down"}.
@separate
@example
\translator Staff = down
@node Fine tuning a piece
@section Fine tuning a piece
+In this section, we show some ways to fine tune the final output of a
+piece. We do so using a single measure of a moderately complex piano
+piece: a Brahms intermezzo (opus 119, no. 1).
+
+The code for the untuned example shows us some new things.
+
+@lilypondfile[verbatim]{brahms-original.ly}
+Hairpin dynamics can be indicated using @code{\>} to start a
+decrescendo, and @code{\!} to end one. The crescendo is started using
+@code{\<} and also ended using @code{\!}. Absolute dynamics can be
+entered using @code{\p}, @code{\mf}, etc.
-@lilypondfile{brahms-original.ly}
+Fingering indications are entered quite simply using @code{-@var{N}},
+where @var{N} is a digit.
@lilypondfile{brahms-tweaked.ly}
+Printed symbols are internally represented by so-called Graphical
+Objects (more colloquially: Grobs). These statements concern the
+grob called `Stem'. Each grob is described by a bunch of settings. These
+setting determine the fonts, offsets, sub-routines to be called on the
+grob, etc. The initial values of these settings are set in the Scheme
+file @file{scm/grob-description.scm}.
+
+
+@separate
+@example
+ stemDown = \property Voice.Stem \override #'direction = #-1
+@end example
+
+Set a property for all Stem grobs in the current Voice:
+@code{direction} is set to @code{-1}, which encodes down. The setting
+remains in effect until it is reverted.
+
+@separate
+@example
+ \property Voice.Stem \revert #'direction
+@end example
+
+Revert the to the previous setting. The effect of precisely one
+@code{\stemDown} or @code{\stemUp} is neutralized.
+
+
+@cindex dynamics
+@cindex loudness
+@cindex forte
+@code{\f} places a forte symbol under the chord. The forte applies to
+the whole chord, but the syntax requires that commands like forte and
+arpeggio are attached to a note, so here we attach them to the first
+note.
+
+On the first chord, a crescendo is started with
+@code{\<}. To be precise, the crescendo start is syntactically attached
+to the preceding note, the @code{d}.
+
+@cindex dynamics
+@cindex crescendo
+@cindex @code{\<}
+
+@cindex @code{\!}
+
+The crescendo is ended at the half note by the escaped exclamation
+mark @code{\!}.
@node An orchestral score
projects / lilypond.git / commitdiff