--- /dev/null
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6868
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Elliot Powell
+#define PRODUCT ephs68
+#define DESCRIPTION A Hotswapable keyboard for kayak
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+ { B6, B5, B4, D0, F6 }
+#define MATRIX_COL_PINS \
+ { B0, B1, B3, B2, B7, D3, F1, D5, D6, D7, F4, F5, C7, C6, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hs68.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define xxx KC_NO
+
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \
+) { \
+ {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \
+ {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, xxx, K1E}, \
+ {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E}, \
+ {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E}, \
+ { K40, K41, K42, xxx, xxx, xxx, K46, xxx, xxx, xxx, K4A, K4B, K4C, K4D, K4E } \
+ }
--- /dev/null
+{
+ "keyboard_name": "EPHS68",
+ "maintainer": "Elliot Powell (u/e11i0t23)",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {
+ "label": "ESC",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "\"",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "\u00a3",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 0,
+ "w": 2
+ },
+ {
+ "label": "GRAV",
+ "x": 15,
+ "y": 0
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "DEL",
+ "x": 15,
+ "y": 1
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "@",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "~",
+ "x": 12.75,
+ "y": 2
+ },
+ {
+ "label": "Enter",
+ "x": 13.75,
+ "y": 1,
+ "w": 1.25,
+ "h": 2
+ },
+ {
+ "label": "PGUP",
+ "x": 15,
+ "y": 2
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 1.25
+ },
+ {
+ "label": "|",
+ "x": 1.25,
+ "y": 3
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "label": "UP",
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "PGDN",
+ "x": 15,
+ "y": 3
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "AltGr",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "LEFT",
+ "x": 13,
+ "y": 4
+ },
+ {
+ "label": "DOWN",
+ "x": 14,
+ "y": 4
+ },
+ {
+ "label": "RIGHT",
+ "x": 15,
+ "y": 4
+ }
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_END,
+ KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT
+ ),
+};
--- /dev/null
+# hs68
+
+Hotswap 68% deisnged for the Kayak
+
+Keyboard Maintainer: [e11i0t23](https://github.com/e11i0t23)
+Hardware Supported: ephs68 pcb. Kayak case kits
+Hardware Availability: None
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ep/comsn/hs68:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
--- /dev/null
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x9696
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Elliot Powell
+#define PRODUCT mollydooker
+#define DESCRIPTION Custom southpaw replacement PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+ { F4, F5, F6, F7, D2 }
+#define MATRIX_COL_PINS \
+ { B1, B2, B3, E6, B7, F1, F0, D0, D1, D7, D5, D4, D6, B4, B5, D3, B6, C6, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+#define RGB_DI_PIN B0
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 84
+#define RGBLIGHT_LIMIT_VAL 35
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
--- /dev/null
+{
+ "keyboard_name": "mollydooker",
+ "maintainer": "Elliot Powell (u/e11i0t23)",
+ "width": 20,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "label": "VolDn", "x": 0, "y": 0 },
+ { "label": "VolUp", "x": 1, "y": 0 },
+ { "label": "Mute", "x": 2, "y": 0 },
+ { "label": "~", "x": 3, "y": 0 },
+ { "label": "Esc", "x": 4, "y": 0 },
+ { "label": "!", "x": 5, "y": 0 },
+ { "label": "@", "x": 6, "y": 0 },
+ { "label": "#", "x": 7, "y": 0 },
+ { "label": "$", "x": 8, "y": 0 },
+ { "label": "%", "x": 9, "y": 0 },
+ { "label": "^", "x": 10, "y": 0 },
+ { "label": "&", "x": 11, "y": 0 },
+ { "label": "*", "x": 12, "y": 0 },
+ { "label": "(", "x": 13, "y": 0 },
+ { "label": ")", "x": 14, "y": 0 },
+ { "label": "_", "x": 15, "y": 0 },
+ { "label": "+", "x": 16, "y": 0 },
+ { "label": "Backspace", "x": 17, "y": 0, "w": 2 },
+ { "label": "Del", "x": 19, "y": 0 },
+ { "label": "7", "x": 0, "y": 1 },
+ { "label": "8", "x": 1, "y": 1 },
+ { "label": "9", "x": 2, "y": 1 },
+ { "label": "+", "x": 3, "y": 1, "h": 2 },
+ { "label": "Tab", "x": 4, "y": 1, "w": 1.5 },
+ { "label": "Q", "x": 5.5, "y": 1 },
+ { "label": "W", "x": 6.5, "y": 1 },
+ { "label": "E", "x": 7.5, "y": 1 },
+ { "label": "R", "x": 8.5, "y": 1 },
+ { "label": "T", "x": 9.5, "y": 1 },
+ { "label": "Y", "x": 10.5, "y": 1 },
+ { "label": "U", "x": 11.5, "y": 1 },
+ { "label": "I", "x": 12.5, "y": 1 },
+ { "label": "O", "x": 13.5, "y": 1 },
+ { "label": "P", "x": 14.5, "y": 1 },
+ { "label": "{", "x": 15.5, "y": 1 },
+ { "label": "}", "x": 16.5, "y": 1 },
+ { "label": "|", "x": 17.5, "y": 1, "w": 1.5 },
+ { "label": "PgUp", "x": 19, "y": 1 },
+ { "label": "4", "x": 0, "y": 2 },
+ { "label": "5", "x": 1, "y": 2 },
+ { "label": "6", "x": 2, "y": 2 },
+ { "label": "Caps Lock", "x": 4, "y": 2, "w": 1.75 },
+ { "label": "A", "x": 5.75, "y": 2 },
+ { "label": "S", "x": 6.75, "y": 2 },
+ { "label": "D", "x": 7.75, "y": 2 },
+ { "label": "F", "x": 8.75, "y": 2 },
+ { "label": "G", "x": 9.75, "y": 2 },
+ { "label": "H", "x": 10.75, "y": 2 },
+ { "label": "J", "x": 11.75, "y": 2 },
+ { "label": "K", "x": 12.75, "y": 2 },
+ { "label": "L", "x": 13.75, "y": 2 },
+ { "label": ":", "x": 14.75, "y": 2 },
+ { "label": "\"", "x": 15.75, "y": 2 },
+ { "label": "Enter", "x": 16.75, "y": 2, "w": 2.25 },
+ { "label": "PgDn", "x": 19, "y": 2 },
+ { "label": "1", "x": 0, "y": 3 },
+ { "label": "2", "x": 1, "y": 3 },
+ { "label": "3", "x": 2, "y": 3 },
+ { "label": "Enter", "x": 3, "y": 3, "h": 2 },
+ { "label": "Shift", "x": 4, "y": 3, "w": 2.25 },
+ { "label": "Z", "x": 6.25, "y": 3 },
+ { "label": "X", "x": 7.25, "y": 3 },
+ { "label": "C", "x": 8.25, "y": 3 },
+ { "label": "V", "x": 9.25, "y": 3 },
+ { "label": "B", "x": 10.25, "y": 3 },
+ { "label": "N", "x": 11.25, "y": 3 },
+ { "label": "M", "x": 12.25, "y": 3 },
+ { "label": "<", "x": 13.25, "y": 3 },
+ { "label": ">", "x": 14.25, "y": 3 },
+ { "label": "?", "x": 15.25, "y": 3 },
+ { "label": "Shift", "x": 16.25, "y": 3, "w": 1.75 },
+ { "label": "Up", "x": 18, "y": 3 },
+ { "label": "fn0", "x": 19, "y": 3 },
+ { "label": "0", "x": 0, "y": 4, "w": 2 },
+ { "label": ".", "x": 2, "y": 4 },
+ { "label": "Ctrl", "x": 4, "y": 4, "w": 1.25 },
+ { "label": "Win", "x": 5.25, "y": 4, "w": 1.25 },
+ { "label": "Alt", "x": 6.5, "y": 4, "w": 1.25 },
+ { "label": "Space", "x": 7.75, "y": 4, "w": 6.25 },
+ { "label": "Alt", "x": 14, "y": 4, "w": 1.5 },
+ { "label": "Ctrl", "x": 15.5, "y": 4, "w": 1.5 },
+ { "label": "Left", "x": 17, "y": 4 },
+ { "label": "Down", "x": 18, "y": 4 },
+ { "label": "Right", "x": 19, "y": 4 }
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT( /* Base */
+ KC_NLCK, KC_PSLS, KC_PMNS, RGB_MOD, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+ KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_P4, KC_P5, KC_P6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_P1, KC_P2, KC_P3, KC_PENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_F5,
+ KC_P0, KC_PDOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+};
+
+int RGB_current_mode;
+
+void matrix_init_user(void) {
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+ enum rgb_matrix_effects {
+ RGB_MATRIX_SOLID_COLOR = 1,
+ #ifdef RGB_MATRIX_KEYPRESSES
+ RGB_MATRIX_SOLID_REACTIVE,
+ #endif
+ RGB_MATRIX_EFFECT_MAX
+ };
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "mollydooker.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define xxxx KC_NO
+
+#define LAYOUT( \
+ K100, K101, K102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117, k118, \
+ K200, k201, K202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, k217, k218, \
+ K300, k301, K302, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k315, k317, k318, \
+ K400, K401, K402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, k414, k416, k417, k418, \
+ K500, K502, k504, k505, k506, k509, k513, k514, k516, k517, k518) \
+{ \
+ {K100, K101, K102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117, k118}, \
+ {K200, k201, K202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, k217, k218}, \
+ {K300, k301, K302, xxxx, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k315, xxxx, k317, k318}, \
+ {K400, K401, K402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, k414, xxxx, k416, k417, k418}, \
+ {K500, xxxx, K502, xxxx, k504, k505, k506, xxxx, xxxx, k509, xxxx, xxxx, xxxx, k513, k514, xxxx, k516, k517, k518} \
+}
--- /dev/null
+# mollydooker
+
+A southpaw extended 65 replacement PCB with per key RGB
+
+Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23](https://reddit.com/u/e11i0t23)
+Hardware Supported: mollydooker
+Hardware Availability: None
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ep/comsn/mollydooker:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
--- /dev/null
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x9696
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Elliot Powell
+#define PRODUCT TF Longeboye
+#define DESCRIPTION TF Longeboye Designed for Papi SodaMan of MKUK
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 18
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+ { B5, B4, D1, D2, D3 }
+#define MATRIX_COL_PINS \
+ { F4, F5, F6, F7, B1, B3, B2, B6, F0, F1, C7, D5, B7, E6, D7, C6, D4, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
--- /dev/null
+{
+ "keyboard_name": "tf_longeboye",
+ "maintainer": "Elliot Powell (u/e11i0t23)",
+ "width": 21.5,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "label": "Esc", "x": 0, "y": 0 },
+ { "label": "!", "x": 1, "y": 0 },
+ { "label": "\"", "x": 2, "y": 0 },
+ { "label": "\u00a3", "x": 3, "y": 0 },
+ { "label": "$", "x": 4, "y": 0 },
+ { "label": "%", "x": 5, "y": 0 },
+ { "label": "^", "x": 6, "y": 0 },
+ { "label": "&", "x": 7, "y": 0 },
+ { "label": "*", "x": 8, "y": 0 },
+ { "label": "(", "x": 9, "y": 0 },
+ { "label": ")", "x": 10, "y": 0 },
+ { "label": "_", "x": 11, "y": 0 },
+ { "label": "+", "x": 12, "y": 0 },
+ { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
+ { "label": "Insert", "x": 15.25, "y": 0 },
+ { "label": "PgUp", "x": 16.25, "y": 0 },
+ { "label": "Num Lock", "x": 17.5, "y": 0 },
+ { "label": "/", "x": 18.5, "y": 0 },
+ { "label": "*", "x": 19.5, "y": 0 },
+ { "label": "-", "x": 20.5, "y": 0 },
+ { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+ { "label": "Q", "x": 1.5, "y": 1 },
+ { "label": "W", "x": 2.5, "y": 1 },
+ { "label": "E", "x": 3.5, "y": 1 },
+ { "label": "R", "x": 4.5, "y": 1 },
+ { "label": "T", "x": 5.5, "y": 1 },
+ { "label": "Y", "x": 6.5, "y": 1 },
+ { "label": "U", "x": 7.5, "y": 1 },
+ { "label": "I", "x": 8.5, "y": 1 },
+ { "label": "O", "x": 9.5, "y": 1 },
+ { "label": "P", "x": 10.5, "y": 1 },
+ { "label": "{", "x": 11.5, "y": 1 },
+ { "label": "}", "x": 12.5, "y": 1 },
+ { "label": "Delete", "x": 15.25, "y": 1 },
+ { "label": "PgDn", "x": 16.25, "y": 1 },
+ { "label": "7", "x": 17.5, "y": 1 },
+ { "label": "8", "x": 18.5, "y": 1 },
+ { "label": "9", "x": 19.5, "y": 1 },
+ { "label": "+", "x": 20.5, "y": 1, "h": 2 },
+ { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+ { "label": "A", "x": 1.75, "y": 2 },
+ { "label": "S", "x": 2.75, "y": 2 },
+ { "label": "D", "x": 3.75, "y": 2 },
+ { "label": "F", "x": 4.75, "y": 2 },
+ { "label": "G", "x": 5.75, "y": 2 },
+ { "label": "H", "x": 6.75, "y": 2 },
+ { "label": "J", "x": 7.75, "y": 2 },
+ { "label": "K", "x": 8.75, "y": 2 },
+ { "label": "L", "x": 9.75, "y": 2 },
+ { "label": ":", "x": 10.75, "y": 2 },
+ { "label": "@", "x": 11.75, "y": 2 },
+ { "label": "~", "x": 12.75, "y": 2 },
+ { "label": "Enter", "x": 13.75, "y": 1, "w": 1.25, "h": 2 },
+ { "label": "4", "x": 17.5, "y": 2 },
+ { "label": "5", "x": 18.5, "y": 2 },
+ { "label": "6", "x": 19.5, "y": 2 },
+ { "label": "Shift", "x": 0, "y": 3, "w": 1.25 },
+ { "label": "|", "x": 1.25, "y": 3 },
+ { "label": "Z", "x": 2.25, "y": 3 },
+ { "label": "X", "x": 3.25, "y": 3 },
+ { "label": "C", "x": 4.25, "y": 3 },
+ { "label": "V", "x": 5.25, "y": 3 },
+ { "label": "B", "x": 6.25, "y": 3 },
+ { "label": "N", "x": 7.25, "y": 3 },
+ { "label": "M", "x": 8.25, "y": 3 },
+ { "label": "<", "x": 9.25, "y": 3 },
+ { "label": ">", "x": 10.25, "y": 3 },
+ { "label": "?", "x": 11.25, "y": 3 },
+ { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
+ { "label": "fn", "x": 14, "y": 3 },
+ { "label": "\u2191", "x": 15.25, "y": 3 },
+ { "label": "1", "x": 17.5, "y": 3 },
+ { "label": "2", "x": 18.5, "y": 3 },
+ { "label": "3", "x": 19.5, "y": 3 },
+ { "label": "Enter", "x": 20.5, "y": 3, "h": 2 },
+ { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
+ { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 },
+ { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 },
+ { "x": 3.75, "y": 4, "w": 6.25 },
+ { "label": "Alt Gr", "x": 10, "y": 4, "w": 1.25 },
+ { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 },
+ { "label": "Ctrl", "x": 12.5, "y": 4, "w": 1.25 },
+ { "label": "\u2190", "x": 14.25, "y": 4 },
+ { "label": "\u2193", "x": 15.25, "y": 4 },
+ { "label": "\u2192", "x": 16.25, "y": 4 },
+ { "label": "0", "x": 17.5, "y": 4, "w": 2 },
+ { "label": ".", "x": 19.5, "y": 4 }
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT( /* Base */
+
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_P7, KC_P8, KC_P9,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
+ ),
+ [1] = LAYOUT( /* Base */
+
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, SGUI(KC_S), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS
+),
+
+};
+
+
--- /dev/null
+# TF Longeboye
+
+Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23](https://reddit.com/u/e11i0t23)
+Hardware Supported: TF Longeboye
+Hardware Availability: None
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ep/comsn/tf_longeboye:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "tf_longeboye.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K013, K014, K015, K016, K018, K019, K408, K114, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K113, K115, K116, K118, K119, K407, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, K218, K219, K405, K216, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K318, K319, K404, K316, \
+ K400, K401, K402, K406, K410, K411, K413, K414, K415, K416, K418, K403 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K013, K014, K015, K016, K018, K019, }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K113, K114, K115, K116, K118, K119, }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, KC_NO, K216, K218, K219, }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K318, K319, }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, KC_NO, K410, K411, K413, K414, K415, K416, K418, KC_NO, } \
+}
projects / qmk_firmware.git / commitdiff