--- /dev/null
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = terminal_usb_102_pjrc
+
+# Directory common source filess exist
+COMMON_DIR = ..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = main.c \
+ keymap_102.c \
+ matrix.c \
+ led.c \
+ ps2.c
+
+CONFIG_H = config_102_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(COMMON_DIR)/pjrc.mk
+include $(COMMON_DIR)/common.mk
--- /dev/null
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = terminal_usb_122_pjrc
+
+# Directory common source filess exist
+COMMON_DIR = ..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = main.c \
+ keymap_122.c \
+ matrix.c \
+ led.c \
+ ps2.c
+
+CONFIG_H = config_122_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#MOUSEKEY_ENABLE = yes # Mouse keys
+#EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(COMMON_DIR)/pjrc.mk
+include $(COMMON_DIR)/common.mk
--- /dev/null
+PS/2 to USB keyboard converter for IBM terminal keyboard
+=========================================================
+It supports PS/2 Scan Code Set 3 and runs on Teensy, Teensy++ and boards withATMega32u4/AT90USB.
+I tested the converter only on Teensy with 1392595(102keys terminal keyboard), though, I think it will also work with 122keys boards.
+
+
+
+CONNECTION
+----------
+Data: PD0
+Clock: PD1
+
+It is same as Soarer's converter pin configuration.
+http://geekhack.org/showwiki.php?title=Island:17458
+
+
+
+BUILD
+-----
+For 102keys:
+$ make -f Makefile.102_pjrc
+
+For 122keys(not tested):
+$ make -f Makefile.122_pjrc
+
+
+I used WinAVR 20100110 to develop.
+
+
+
+RESOURCE
+--------
+WinAVR: http://winavr.sourceforge.net/
+1392595: http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6531
+#define MANUFACTURER t.m.k.
+#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 102keys)
+#define DESCRIPTION USB converter for IBM Terminal Keyboard 102keys
+
+
+/* matrix size */
+#define MATRIX_ROWS 17 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+# define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+
+#endif
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6532
+#define MANUFACTURER t.m.k.
+#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 122keys)
+#define DESCRIPTION USB converter for IBM Terminal Keyboard 122keys
+
+
+/* matrix size */
+#define MATRIX_ROWS 17 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+# define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+
+#endif
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/*
+ * IBM Terminal keyboard 1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ * 8 bytes
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+#define KEYMAP( \
+ K08, K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, K57,K5F,K62, \
+ \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
+ K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K6B,K73,K74,K7B, \
+ K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K63, K69,K72,K7A,K79, \
+ K11, K19, K29, K39, K58, K61,K60,K6A, K68,K70,K71,K78 \
+) { \
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K07 }, \
+ { KB_##K08, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K0D, KB_##K0E, KB_##K0F }, \
+ { KB_NO, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+ { KB_NO, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+ { KB_NO, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+ { KB_NO, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+ { KB_NO, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+ { KB_NO, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+ { KB_NO, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+ { KB_NO, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+ { KB_NO, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+ { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+ { KB_NO, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+ { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \
+ { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+ { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_##K84, KB_NO, KB_NO, KB_NO, }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+ 1, // Fn0
+ 2, // Fn1
+ 3, // Fn2
+ 0, // Fn3
+ 0, // Fn4
+ 0, // Fn5
+ 0, // Fn6
+ 0 // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+ KB_SCLN, // Fn0
+ KB_SLSH, // Fn1
+ KB_ESC, // Fn2
+ KB_NO, // Fn3
+ KB_NO, // Fn4
+ KB_NO, // Fn5
+ KB_NO, // Fn6
+ KB_NO // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `----' `---------------------------------------' `----' `-----------' `---------------'
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
+ LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, NUHS,ENT, P4, P5, P6, PCMM,
+ LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, FN1, RO, FN2, UP, P1, P2, P3, PENT,
+ LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
+ ),
+
+ /* 1: Mouse keys
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+ * |-----------------------------------------------------------|
+ * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \|
+ * |-----------------------------------------------------------|
+ * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return |
+ * |-----------------------------------------------------------|
+ * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl | |Alt | Mb1 |Alt | |Ctrl|
+ * `-----' `--------------------------------------' `----'
+ * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
+ * Vo = Volume, Mut = Mute
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
+ LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT, P4, P5, P6, PCMM,
+ LSFT,NO, VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, NO, RSFT, UP, P1, P2, P3, PENT,
+ LGUI, LALT, BTN1, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
+ ),
+
+ /* 2: Cursor keys
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+ * |-----------------------------------------------------------|
+ * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \|
+ * |-----------------------------------------------------------|
+ * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl | |Alt | Space |Alt | |Ctrl|
+ * `-----' `--------------------------------------' `----'
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PMNS,
+ LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, P4, P5, P6, PCMM,
+ LSFT,NO, VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, NO, RSFT, UP, P1, P2, P3, PENT,
+ LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
+ ),
+
+ /* 3: HHKB
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
+ * |-----------------------------------------------------------|
+ * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | | +| -|End|PgD|Dow|Fn2 |
+ * |-----------------------------------------------------------|
+ * |Ctrl | |Alt | Space |Alt | |Ctrl|
+ * `-----' `--------------------------------------' `----'
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
+ LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT, NO, ENT, P4, P5, P6, PCMM,
+ LSFT,NO, NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN, NO, FN2, UP, P1, P2, P3, PENT,
+ LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
+ ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+ return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/*
+ * IBM Terminal keyboard 1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ * 8 bytes
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+#define KEYMAP( \
+ K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \
+ K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \
+ \
+ K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
+ K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
+ K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \
+ K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \
+ K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \
+) { \
+ { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+ { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+ { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+ { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+ { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+ { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+ { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+ { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+ { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+ { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+ { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+ { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+ { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+ { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \
+ { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+ { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \
+ { KB_NO, KB_NO, KB_NO, KB_##K83, KB_##K84, KB_NO, KB_NO, KB_NO, }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+ 0, // Fn0
+ 0, // Fn1
+ 0, // Fn2
+ 0, // Fn3
+ 0, // Fn4
+ 0, // Fn5
+ 0, // Fn6
+ 0 // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+ KB_NO, // Fn0
+ KB_NO, // Fn1
+ KB_NO, // Fn2
+ KB_NO, // Fn3
+ KB_NO, // Fn4
+ KB_NO, // Fn5
+ KB_NO, // Fn6
+ KB_NO // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `----' `---------------------------------------' `----' `-----------' `---------------'
+ */
+ KEYMAP(
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
+ F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
+
+ PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
+ PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM,
+ APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, FN1, RO, FN2, LEFT,INT2,RGHT, P1, P2, P3, PENT,
+ RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
+ ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+ return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
--- /dev/null
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ uint8_t ps2_led = 0;
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ ps2_led |= (1<<PS2_LED_NUM_LOCK);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+ ps2_host_set_led(ps2_led);
+}
--- /dev/null
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
+ *
+ * 8bit wide
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code) (code>>3)
+#define COL(code) (code&0x07)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ print_enable = true;
+ debug_enable = true;
+ //debug_matrix = true;
+ //debug_keyboard = true;
+ //debug_mouse = false;
+
+ ps2_host_init();
+ // Make and Break code without Typematic
+ while (ps2_host_send(0xF8) != 0xFA) {
+ debug("send F8: failed\n");
+ _delay_ms(500);
+ }
+ debug("send F8: OK\n");
+
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+ return;
+}
+
+uint8_t matrix_scan(void)
+{
+
+ // scan code reading states
+ static enum {
+ INIT,
+ F0,
+ } state = INIT;
+
+
+ is_modified = false;
+
+ uint8_t code;
+ while ((code = ps2_host_recv())) {
+ debug_hex(code);
+ switch (state) {
+ case INIT:
+ switch (code) {
+ case 0xF0:
+ state = F0;
+ debug(" ");
+ break;
+ default: // normal key make
+ if (code < 0x88) {
+ matrix_make(code);
+ } else {
+ debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
+ }
+ state = INIT;
+ debug("\n");
+ }
+ break;
+ case F0: // Break code
+ switch (code) {
+ default:
+ if (code < 0x88) {
+ matrix_break(code);
+ } else {
+ debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+ }
+ state = INIT;
+ debug("\n");
+ }
+ break;
+ }
+ }
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ if (matrix_has_ghost_in_row(i))
+ return true;
+ }
+#endif
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+ pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+ if (matrix_has_ghost_in_row(row)) {
+ print(" <ghost");
+ }
+#endif
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop(matrix[i]);
+ }
+ return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+ // no ghost exists in case less than 2 keys on
+ if (((matrix[row] - 1) & matrix[row]) == 0)
+ return false;
+
+ // ghost exists in case same state as other row
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+ return true;
+ }
+ return false;
+}
+#endif
+
+
+inline
+static void matrix_make(uint8_t code)
+{
+ if (!matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] |= 1<<COL(code);
+ is_modified = true;
+ }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+ if (matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] &= ~(1<<COL(code));
+ is_modified = true;
+ }
+}
#define KB_PGDN KB_PGDOWN
#define KB_PSCR KB_PSCREEN
#define KB_SLCK KB_SCKLOCK
-#define KB_BRK KB_BREAK
+#define KB_PAUS KB_PAUSE
+#define KB_BRK KB_PAUSE
#define KB_NLCK KB_NUMLOCK
#define KB_SPC KB_SPACE
#define KB_MINS KB_MINUS
KB_F12,
KB_PSCREEN,
KB_SCKLOCK,
- KB_BREAK,
+ KB_PAUSE,
KB_INSERT,
KB_HOME,
KB_PGUP,
projects / qmk_firmware.git / commitdiff