Update lock led processing and remove debug msgs

diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c
index cc4633b1b4028ad32aefc0c6d7651fa48f829903..59249ff728432fa34b4d3b664413a9879757ebca 100644 (file)
--- a/keyboards/infinity60/keymaps/jpetermans/keymap.c
+++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c
@@ -247,7 +247,6 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) {
 
 // Runs just one time when the keyboard initializes.
 void matrix_init_user(void) {
-    xprintf("init start");
 
     led_controller_init();
 

diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index 5c177d26b0fb8086cafba3ae1f97245793f930b2..21f95a9c129c3fda0445cb3cf56c9f1e2631559b 100644 (file)
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -135,7 +135,6 @@ msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
  * initialise the IS31 chip
  * ======================== */
 void is31_init(void) {
-      xprintf("_is31_init\n");
   // just to be sure that it's all zeroes
   __builtin_memset(full_page,0,0xB4+1);
   // zero function page, all registers (assuming full_page is all zeroes)
@@ -200,41 +199,33 @@ static THD_FUNCTION(LEDthread, arg) {
     msg_args[1] = (msg >> 16) & 0XFF;
     msg_args[2] = (msg >> 24) & 0xFF;
 
-      xprintf("msg_type: %d-%d-%d\n", msg_type, msg_args[0], msg_args[1]);
 
     switch (msg_type){
       case SET_FULL_ROW:
-      xprintf("FULL ROW: %d-%d\n", msg_args[0], msg_args[1]);
       //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
       //writes only to currently displayed page
         write_led_byte(page_status, msg_args[1], msg_args[0]);
         break;
 
       case OFF_LED:
-      xprintf("OFF: %d-%d\n", msg_args[0], msg_args[1]);
       //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
         set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
         break;
       case ON_LED:
-      xprintf("ON: %d-%d\n", msg_args[0], msg_args[1]);
         set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
         break;
       case TOGGLE_LED:
-      xprintf("TOGGLE: %d-%d\n", msg_args[0], msg_args[1]);
         set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
         break;
 
       case BLINK_OFF_LED:
-      xprintf("B_on: %d-%d\n", msg_args[0], msg_args[1]);
       //on/off/toggle single led, msg_args[0] = row/col of led
         set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
         break;
       case BLINK_ON_LED:
-      xprintf("B_off: %d-%d\n", msg_args[0], msg_args[1]);
         set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
         break;
       case BLINK_TOGGLE_LED:
-      xprintf("B_togg: %d-%d\n", msg_args[0], msg_args[1]);
         set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
         break;
 
@@ -244,12 +235,10 @@ static THD_FUNCTION(LEDthread, arg) {
         chThdSleepMilliseconds(5);
         is31_read_register(0, 0x00, &temp);
         is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-      xprintf("TOGGLE_ALL: %d-%d\n", msg_args[0], msg_args[1]);
-      xprintf("temp: %d\n", temp);
 
         led_control_reg[0] = 0;
 
-        //if first leds are already on, toggle frame 0 off
+        //toggle led mask based on current state (temp)
         if (temp==0 || page_status > 0) {
           __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
         } else {
@@ -262,13 +251,14 @@ static THD_FUNCTION(LEDthread, arg) {
 
           page_status=0;
 
-          //maintain lock leds
+          //maintain lock leds, reset to off and force recheck to blink of all leds toggled on
+          numlock_status = 0;
+          capslock_status = 0;
           led_set(host_keyboard_leds());
         }
         break;
 
       case TOGGLE_BACKLIGHT:
-      xprintf("TOGGLE_BKLT: %d-%d\n", msg_args[0], msg_args[1]);
         //msg_args[0] = on/off
 
         //populate 9 byte rows to be written to each pin, first byte is register (pin) address
@@ -287,12 +277,13 @@ static THD_FUNCTION(LEDthread, arg) {
 
       case DISPLAY_PAGE:
       //msg_args[0] = page to toggle on
-      xprintf("DSPY_PG: %d-%d\n", msg_args[0], msg_args[1]);
         if (page_status != msg_args[0]) {
           is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
           page_status = msg_args[0];
 
-          //maintain lock leds
+          //maintain lock leds, reset to off and force recheck for new page
+          numlock_status = 0;
+          capslock_status = 0;
           led_set(host_keyboard_leds());
         }
         break;
@@ -309,7 +300,6 @@ static THD_FUNCTION(LEDthread, arg) {
         break;
 
       case TOGGLE_NUM_LOCK:
-      xprintf("NMLK: %d-%d\n", msg_args[0], msg_args[1]);
       //msg_args[0] = 0 or 1, off/on
         if (numlock_status != msg_args[0]) {
           set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
@@ -317,7 +307,6 @@ static THD_FUNCTION(LEDthread, arg) {
         }
         break;
       case TOGGLE_CAPS_LOCK:
-      xprintf("CPLK: %d-%d\n", msg_args[0], msg_args[1]);
       //msg_args[0] = 0 or 1, off/on
         if (capslock_status != msg_args[0]) {
           set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
@@ -326,7 +315,6 @@ static THD_FUNCTION(LEDthread, arg) {
         break;
 
       case STEP_BRIGHTNESS:
-      xprintf("Step: %d-%d\n", msg_args[0], msg_args[1]);
       //led_args[0] = step up (1) or down (0)
         switch (msg_args[0]) {
           case 0:
@@ -373,7 +361,6 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin
   if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
     return;
   }
-      xprintf("_set action-led: %x-%d\n", action, led_addr);
 
   blink_bit = action>>2;//check for blink bit
   action &= ~(1<<2); //strip blink bit
@@ -381,17 +368,14 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin
   //led_addr tens column is pin#, ones column is bit position in 8-bit mask
   control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
   control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
-      xprintf("_set control address: %x\n", control_reg_addr);
 
   is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
   chThdSleepMilliseconds(5);
   is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
   is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-      xprintf("_set temp_byte_mask: %x\n", temp);
 
   column_bit = 1<<(led_addr % 10 - 1);
   column_byte = temp;
-      xprintf("_set col_byte_mask: %x\n", column_byte);
 
   switch(action) {
     case 0:
@@ -451,7 +435,6 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
       led_action |= (1<<2); //set blink bit
     }
   }
-      xprintf("_lock action: %d\n", led_action);
 
   set_led_bit(page,led_control_word,led_addr,led_action);
 }
@@ -462,7 +445,6 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
 void led_controller_init(void) {
   uint8_t i;
 
-      xprintf("led_init\n");
   /* initialise I2C */
   /* I2C pins */
   palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL

diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h
index 457b21a9254dbcd1473749bce9a838a29334b4e9..eb6060f260004120826d66b4a6b2b1b2c0a8fd06 100644 (file)
--- a/keyboards/infinity60/led_controller.h
+++ b/keyboards/infinity60/led_controller.h
@@ -75,7 +75,8 @@ void led_controller_init(void);
 // D2:D0 extinguish time (3.5ms*2^i)
 
 #define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_ON 0x1
+#define IS31_REG_SHUTDOWN_OFF 0x1
+#define IS31_REG_SHUTDOWN_ON 0x0
 
 #define IS31_REG_AGCCTRL 0x0B
 #define IS31_REG_ADCRATE 0x0C

diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
index f58bb264207af1e51fe186e35c8cbb05ce93fd23..c19f62401d2547a545a83915cd8a3726e9a30af8 100644 (file)
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -56,7 +56,7 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes        # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
 MOUSEKEY_ENABLE ?= yes # Mouse keys
 EXTRAKEY_ENABLE ?= yes # Audio control and System control