$(COMMON_DIR)/print.c \
$(COMMON_DIR)/debug.c \
$(COMMON_DIR)/bootloader.c \
+ $(COMMON_DIR)/suspend.c \
$(COMMON_DIR)/util.c
ifdef SLEEP_LED_ENABLE
SRC += $(COMMON_DIR)/sleep_led.c
OPT_DEFS += -DSLEEP_LED_ENABLE
+ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
endif
#include "bootloader.h"
#include "layer_switch.h"
#include "eeconfig.h"
+#include "sleep_led.h"
+#include "led.h"
#include "command.h"
#ifdef MOUSEKEY_ENABLE
{
static host_driver_t *host_driver = 0;
switch (code) {
+ case KC_Z:
+ // test breathing sleep LED
+ print("Sleep LED test\n");
+ sleep_led_toggle();
+ led_set(host_keyboard_leds());
+ break;
#ifdef BOOTMAGIC_ENABLE
case KC_E:
print("eeprom config\n");
#ifndef SLEEP_LED_H
#define SLEEP_LED_H
-#define NO_SUSPEND_POWER_DOWN
+
+#ifdef SLEEP_LED_ENABLE
void sleep_led_init(void);
void sleep_led_enable(void);
void sleep_led_disable(void);
+void sleep_led_toggle(void);
+
+#else
+
+#define sleep_led_init()
+#define sleep_led_enable()
+#define sleep_led_disable()
+#define sleep_led_toggle()
+
+#endif
#endif
--- /dev/null
+#include "suspend.h"
+#include "matrix.h"
+#include "action.h"
+
+
+void suspend_power_down(void)
+{
+#ifndef NO_SUSPEND_POWER_DOWN
+ // Enable watchdog to wake from MCU sleep
+ cli();
+ wdt_reset();
+
+ // Watchdog Interrupt and System Reset Mode
+ //wdt_enable(WDTO_1S);
+ //WDTCSR |= _BV(WDIE);
+
+ // Watchdog Interrupt Mode
+ wdt_intr_enable(WDTO_120MS);
+
+ // TODO: more power saving
+ // See PicoPower application note
+ // - I/O port input with pullup
+ // - prescale clock
+ // - BOD disable
+ // - Power Reduction Register PRR
+ // sleep in power down mode
+ set_sleep_mode(SLEEP_MODE_PWR_DOWN);
+ sleep_enable();
+ sei();
+ sleep_cpu();
+ sleep_disable();
+
+ // Disable watchdog after sleep
+ wdt_disable();
+#endif
+}
+
+bool suspend_wakeup_condition(void)
+{
+ matrix_scan();
+ for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
+ if (matrix_get_row(r)) return true;
+ }
+ return false;
+}
+
+// run immediately after wakeup
+void suspend_wakeup_init(void)
+{
+ // clear matrix and keyboard state
+ matrix_init();
+ clear_keyboard();
+}
+
+#ifndef NO_SUSPEND_POWER_DOWN
+/* watchdog timeout */
+ISR(WDT_vect)
+{
+ /* wakeup from MCU sleep mode */
+/*
+ // blink LED
+ static uint8_t led_state = 0;
+ static uint8_t led_count = 0;
+ led_count++;
+ if ((led_count & 0x07) == 0) {
+ led_set((led_state ^= (1<<USB_LED_CAPS_LOCK)));
+ }
+*/
+}
+#endif
--- /dev/null
+#ifndef SUSPEND_H
+#define SUSPEND_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/sleep.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+
+
+#define wdt_intr_enable(value) \
+__asm__ __volatile__ ( \
+ "in __tmp_reg__,__SREG__" "\n\t" \
+ "cli" "\n\t" \
+ "wdr" "\n\t" \
+ "sts %0,%1" "\n\t" \
+ "out __SREG__,__tmp_reg__" "\n\t" \
+ "sts %0,%2" "\n\t" \
+ : /* no outputs */ \
+ : "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
+ "r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
+ "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
+ _BV(WDIE) | (value & 0x07)) ) \
+ : "r0" \
+)
+
+
+void suspend_power_down(void);
+bool suspend_wakeup_condition(void);
+void suspend_wakeup_init(void);
+
+#endif
TARGET_DIR = .
# project specific files
-SRC += keymap.c \
+SRC = keymap.c \
matrix.c \
led.c
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
# Build Options
# comment out to disable the options.
#
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
+
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOT_SIZE=4096
+
# Build Options
# comment out to disable the options.
#
EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover(+500)
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
this software.
*/
-#include <avr/sleep.h>
-#include <avr/wdt.h>
#include "report.h"
#include "host.h"
#include "host_driver.h"
#include "keyboard.h"
#include "action.h"
-#include "matrix.h"
#include "led.h"
#include "sendchar.h"
#include "debug.h"
#ifdef SLEEP_LED_ENABLE
#include "sleep_led.h"
#endif
+#include "suspend.h"
#include "descriptor.h"
#include "lufa.h"
void EVENT_USB_Device_WakeUp()
{
- // initialize
- matrix_init();
- clear_keyboard();
+ suspend_wakeup_init();
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
USB_Device_EnableSOFEvents();
}
-
-static bool wakeup_condition(void)
-{
- matrix_scan();
- for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
- if (matrix_get_row(r)) return true;
- }
- return false;
-}
-
-#define wdt_intr_enable(value) \
-__asm__ __volatile__ ( \
- "in __tmp_reg__,__SREG__" "\n\t" \
- "cli" "\n\t" \
- "wdr" "\n\t" \
- "sts %0,%1" "\n\t" \
- "out __SREG__,__tmp_reg__" "\n\t" \
- "sts %0,%2" "\n\t" \
- : /* no outputs */ \
- : "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
- "r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
- "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
- _BV(WDIE) | (value & 0x07)) ) \
- : "r0" \
-)
-
int main(void) __attribute__ ((weak));
int main(void)
{
sei();
while (1) {
- // while suspend
while (USB_DeviceState == DEVICE_STATE_Suspended) {
-#ifndef NO_SUSPEND_POWER_DOWN
- // Enable watchdog to wake from MCU sleep
- cli();
- wdt_reset();
-
- // Watchdog Interrupt and System Reset Mode
- //wdt_enable(WDTO_1S);
- //WDTCSR |= _BV(WDIE);
-
- // Watchdog Interrupt Mode
- wdt_intr_enable(WDTO_120MS);
-
- // TODO: more power saving
- // See PicoPower application note
- // - I/O port input with pullup
- // - prescale clock
- // - BOD disable
- // - Power Reduction Register PRR
- // sleep in power down mode
- set_sleep_mode(SLEEP_MODE_PWR_DOWN);
- sleep_enable();
- sei();
- sleep_cpu();
- sleep_disable();
-
- // Disable watchdog after sleep
- wdt_disable();
-#endif
-
- // Send request of USB Wakeup from Suspend to host
- if (USB_Device_RemoteWakeupEnabled) {
- if (wakeup_condition()) {
+ suspend_power_down();
+ if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
USB_Device_SendRemoteWakeup();
- }
}
}
#endif
}
}
-
-#ifndef NO_SUSPEND_POWER_DOWN
-/* watchdog timeout */
-ISR(WDT_vect)
-{
- /* wakeup from MCU sleep mode */
-/*
- // blink LED
- static uint8_t led_state = 0;
- static uint8_t led_count = 0;
- led_count++;
- if ((led_count & 0x07) == 0) {
- led_set((led_state ^= (1<<USB_LED_CAPS_LOCK)));
- }
-*/
-}
-#endif
#include "print.h"
#include "debug.h"
#include "util.h"
-#include "bootloader.h"
-#ifdef PS2_MOUSE_ENABLE
-# include "ps2_mouse.h"
-#endif
+#include "suspend.h"
#include "host.h"
#include "pjrc.h"
keyboard_init();
host_set_driver(pjrc_driver());
+#ifdef SLEEP_LED_ENABLE
+ sleep_led_init();
+#endif
while (1) {
- keyboard_task();
+ while (suspend) {
+ suspend_power_down();
+ if (remote_wakeup && suspend_wakeup_condition()) {
+ usb_remote_wakeup();
+ }
+ }
+
+ keyboard_task();
}
}
#include "usb_extra.h"
#include "print.h"
#include "util.h"
+#include "sleep_led.h"
+#include "suspend.h"
/**************************************************************************
USB_CONFIG(); // start USB clock
UDCON = 0; // enable attach resistor
usb_configuration = 0;
- UDIEN = (1<<EORSTE)|(1<<SOFE)|(1<<SUSPE);
+ suspend = false;
+ UDIEN = (1<<EORSTE)|(1<<SOFE)|(1<<SUSPE)|(1<<WAKEUPE);
sei();
}
intbits = UDINT;
UDINT = 0;
- if (intbits & (1<<SUSPI)) {
+ if ((intbits & (1<<SUSPI)) && (UDIEN & (1<<SUSPE)) && usb_configuration) {
+#ifdef SLEEP_LED_ENABLE
+ sleep_led_enable();
+#endif
+ UDIEN &= ~(1<<SUSPE);
+ UDIEN |= (1<<WAKEUPE);
suspend = true;
- } else {
+ }
+ if ((intbits & (1<<WAKEUPI)) && (UDIEN & (1<<WAKEUPE)) && usb_configuration) {
+ suspend_wakeup_init();
+#ifdef SLEEP_LED_ENABLE
+ sleep_led_disable();
+#endif
+ led_set(host_keyboard_leds());
+
+ UDIEN |= (1<<SUSPE);
+ UDIEN &= ~(1<<WAKEUPE);
suspend = false;
}
if (intbits & (1<<EORSTI)) {