You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "quantum.h"
+#include "alps64.h"
-#define LED_ON() do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0)
-#define LED_OFF() do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0)
-#define LED_TGL() do { DDRC |= (1<<5); PINC |= (1<<5); } while (0)
+void keyboard_pre_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ setPinOutput(C5);
+ keyboard_pre_init_user();
+}
+void led_set_kb(uint8_t usb_led)
+{
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ // output high
+ writePinHigh(C5);
+ } else {
+ // Hi-Z
+ writePinLow(C5);
+ }
-void matrix_init_kb(void) {
- LED_ON();
- _delay_ms(500);
- LED_OFF();
-
- matrix_init_user();
-}
\ No newline at end of file
+ led_set_user(usb_led);
+}
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef ALPS64_H
-#define ALPS64_H
+#pragma once
#include "quantum.h"
{ K60, K61, K62, K63, K64, K65, K66, K67 }, \
{ KC_NO, K71, K72, K73, K74, K75, K76, K77 } \
}
-
-#define LAYOUT_kc( \
- K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
- K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
- K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
- K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
- K30, K40, K50, K60, K70, K00, K10, K20 \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \
-}
-
-#endif
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6464
#define DEVICE_VER 0x0001
-#define MANUFACTURER TMK
+#define MANUFACTURER Hasu
#define PRODUCT Alps64
#define DESCRIPTION TMK keyboard firmware for Alps64
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // output high
- DDRC |= (1<<5);
- PORTC |= (1<<5);
- } else {
- // Hi-Z
- DDRC &= ~(1<<5);
- PORTC &= ~(1<<5);
- }
-}
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- // initialize row and col
- unselect_rows();
- init_cols();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- //debug
- debug_matrix = true;
- LED_ON();
- _delay_ms(500);
- LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i] != cols) {
- matrix_debouncing[i] = cols;
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); debug("\n");
- }
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- matrix_scan_quantum();
-
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-/* Column pin configuration
- * col: 0 1 2 3 4 5 6 7
- * pin: B0 B1 B2 B3 B4 B5 B6 B7
- */
-static void init_cols(void)
-{
- // Input with pull-up(DDR:0, PORT:1)
- DDRB &= ~0b11111111;
- PORTB |= 0b11111111;
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
- // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1)
- return ~PINB;
-}
-
-/* Row pin configuration
- * row: 0 1 2 3 4 5 6 7
- * pin: D0 D1 D2 D3 D4 D5 D6 C2
- */
-static void unselect_rows(void)
-{
- // Hi-Z(DDR:0, PORT:0) to unselect
- DDRD &= ~0b01111111;
- PORTD &= ~0b01111111;
- DDRC &= ~0b00000100;
- PORTC &= ~0b00000100;
-}
-
-
-static void select_row(uint8_t row)
-{
- // Output low(DDR:1, PORT:0) to select
- switch (row) {
- case 0:
- DDRD |= (1<<0);
- PORTD &= ~(1<<0);
- break;
- case 1:
- DDRD |= (1<<1);
- PORTD &= ~(1<<1);
- break;
- case 2:
- DDRD |= (1<<2);
- PORTD &= ~(1<<2);
- break;
- case 3:
- DDRD |= (1<<3);
- PORTD &= ~(1<<3);
- break;
- case 4:
- DDRD |= (1<<4);
- PORTD &= ~(1<<4);
- break;
- case 5:
- DDRD |= (1<<5);
- PORTD &= ~(1<<5);
- break;
- case 6:
- DDRD |= (1<<6);
- PORTD &= ~(1<<6);
- break;
- case 7:
- DDRC |= (1<<2);
- PORTC &= ~(1<<2);
- break;
- }
-}
-
-
-# Target file name (without extension).
-
-# project specific files
-SRC = led.c
-
# MCU name
MCU = atmega32u2
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER = atmel-dfu
# Build Options
# change to no to disable the options.
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
projects / qmk_firmware.git / commitdiff