--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+#include "converter.h"
\ No newline at end of file
--- /dev/null
+#include "quantum.h"
\ No newline at end of file
--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+Keyboard converter for IBM terminal keyboard
+============================================
+
+This is a port of TMK's converter/terminal_usb to QMK.
+
+It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
+I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
+
+Source code: https://github.com/tmk/tmk_keyboard
+Article: http://geekhack.org/index.php?topic=27272.0
+
+
+CONNECTION
+----------
+Keyboard ATMega32U4
+----------------------
+Data: PD2
+Clock: PD5
+
+And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
+
+
+BUILD
+-----
+$ git clone https://github.com/tmk/tmk_keyboard.git
+$ cd converter/terminal_usb
+$ make
+
+
+RESOURCE
+--------
+Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
+102keys(1392595): http://geekhack.org/index.php?topic=10737.0
+122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
+KbdBabel: http://www.kbdbabel.org/
+RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
+DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
+WinAVR: http://winavr.sourceforge.net/
+
+EOF
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2016 Priyadi Iman Nurcahyo <priyadi@priyadi.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6535
+#define DEVICE_VER 0x0100
+#define MANUFACTURER QMK
+#define PRODUCT IBM Terminal Keyboard
+#define DESCRIPTION USB converter for IBM Terminal Keyboard
+
+
+/* matrix size */
+#define MATRIX_ROWS 17 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* legacy keymap support */
+#define USE_LEGACY_KEYMAP
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \
+)
+
+
+/*
+ * PS/2 USART configuration for ATMega32U4
+ */
+#ifdef PS2_USE_USART
+/* XCK for clock line */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 5
+/* RXD for data line */
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do { \
+ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
+ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
+ UCSR1C = ((1 << UMSEL10) | \
+ (3 << UPM10) | \
+ (0 << USBS1) | \
+ (3 << UCSZ10) | \
+ (0 << UCPOL1)); \
+ UCSR1A = 0; \
+ UBRR1H = 0; \
+ UBRR1L = 0; \
+} while (0)
+#define PS2_USART_RX_INT_ON() do { \
+ UCSR1B = ((1 << RXCIE1) | \
+ (1 << RXEN1)); \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+ UCSR1B = (1 << RXEN1); \
+} while (0)
+#define PS2_USART_OFF() do { \
+ UCSR1C = 0; \
+ UCSR1B &= ~((1 << RXEN1) | \
+ (1 << TXEN1)); \
+} while (0)
+#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA UDR1
+#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT USART1_RX_vect
+#endif
+
+
+/*
+ * PS/2 Interrupt configuration
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+
+#define PS2_INT_INIT() do { \
+ EICRA |= ((1<<ISC11) | \
+ (0<<ISC10)); \
+} while (0)
+#define PS2_INT_ON() do { \
+ EIMSK |= (1<<INT1); \
+} while (0)
+#define PS2_INT_OFF() do { \
+ EIMSK &= ~(1<<INT1); \
+} while (0)
+#define PS2_INT_VECT INT1_vect
+#endif
+
+
+/*
+ * PS/2 Busywait configuration
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+#endif
+
+#endif
--- /dev/null
+#include "ibm_terminal.h"
+
+// void matrix_init_kb(void) {
+
+// matrix_init_user();
+// }
\ No newline at end of file
--- /dev/null
+#ifndef IBM_TERMINAL_H
+#define IBM_TERMINAL_H
+
+#include "quantum.h"
+
+void matrix_init_user(void);
+
+/*
+ * IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ * 8 bytes
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+#define KEYMAP( \
+ K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \
+ K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \
+ \
+ K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
+ K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
+ K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \
+ K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \
+ K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \
+) { \
+ { KC_NO, K01, KC_NO, K03, K04, K05, K06, K07 }, \
+ { K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+ { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+ { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+ { K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+ { K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57 }, \
+ { K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \
+ { K60, K61, K62, K63, K64, K65, K66, K67 }, \
+ { K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }, \
+ { K70, K71, K72, K73, K74, K75, K76, K77 }, \
+ { K78, K79, K7A, K7B, K7C, K7D, K7E, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, K83, K84, KC_NO, KC_NO, KC_NO,}, \
+}
+
+/*
+ * IBM Terminal keyboard 1399625, 101-key
+ */
+#define KEYMAP_101( \
+ K08, K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, K57,K5F,K62, \
+ \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5C, K64,K65,K6D, K6C,K75,K7D, \
+ K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K7C, \
+ K12, K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, K63, K69,K72,K7A, \
+ K11, K19, K29, K39, K58, K61,K60,K6A, K70, K71,K79 \
+) { \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K07 }, \
+ { K08, KC_NO, KC_NO, KC_NO, KC_NO, K0D, K0E, K0F }, \
+ { KC_NO, K11, K12, KC_NO, K14, K15, K16, K17 }, \
+ { KC_NO, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { KC_NO, K21, K22, K23, K24, K25, K26, K27 }, \
+ { KC_NO, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
+ { KC_NO, K31, K32, K33, K34, K35, K36, K37 }, \
+ { KC_NO, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \
+ { KC_NO, K41, K42, K43, K44, K45, K46, K47 }, \
+ { KC_NO, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \
+ { KC_NO, KC_NO, K52, KC_NO, K54, K55, K56, K57 }, \
+ { K58, K59, K5A, K5B, K5C, KC_NO, K5E, K5F }, \
+ { K60, K61, K62, K63, K64, K65, K66, K67 }, \
+ { KC_NO, K69, K6A, K6B, K6C, K6D, K6E, K6F }, \
+ { K70, K71, K72, K73, K74, K75, K76, K77 }, \
+ { KC_NO, K79, K7A, KC_NO, K7C, K7D, K7E, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, K84, KC_NO, KC_NO, KC_NO,}, \
+}
+
+#endif
\ No newline at end of file
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no # MIDI controls
+AUDIO_ENABLE ?= no # Audio output on port C6
+UNICODE_ENABLE ?= no # Unicode
+UNICODEMAP_ENABLE ?= yes
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+PS2_USE_USART ?= yes
+API_SYSEX_ENABLE ?= no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../../Makefile
+endif
+
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "ibm_terminal.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ // Layer 0
+
+ KEYMAP(
+ KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24,
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+
+ KC_PSCR,KC_ESC, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_NO, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+ KC_SLCK,KC_INT4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC, KC_NO, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_PAUS,KC_INT5, KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_BSLS,KC_ENT, KC_UP, KC_P4, KC_P5, KC_P6, KC_PCMM,
+ KC_APP, KC_INT6, KC_LSFT,KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_LEFT,KC_INT2,KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_RGUI,KC_LGUI, KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_GRV, KC_DOWN, KC_NO, KC_P0, KC_PDOT,KC_NO
+ ),
+
+/* 101-key keymaps
+ */
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `----' `---------------------------------------' `----' `-----------' `---------------'
+ */
+/*
+ KEYMAP_101(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK, KC_BRK,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,KC_PPLS,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,
+ KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT,KC_PENT
+ ),
+*/
+};
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no # MIDI controls
+AUDIO_ENABLE ?= no # Audio output on port C6
+UNICODE_ENABLE ?= no # Unicode
+UNICODEMAP_ENABLE ?= yes
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+PS2_USE_USART ?= yes
+API_SYSEX_ENABLE ?= no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../../Makefile
+endif
+
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif
--- /dev/null
+/*
+Copyright 2016 Priyadi Iman Nurcahyo <priyadi@priyadi.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "ibm_terminal.h"
+#include "action_layer.h"
+
+// Fillers to make layering clearer
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+enum layers {
+ QWE, // qwerty
+ COL, // colemak
+ WOR, // workman
+ DVO, // dvorak
+
+ MOU, // mouse keys
+ EMO, // emoji
+ SYS, // system
+};
+
+enum keycodes {
+ // default layout switcher
+ LAY_QWE = SAFE_RANGE,
+ LAY_COL,
+ LAY_WOR,
+ LAY_DVO,
+
+ // layer switchers
+ LYR_SYS,
+ LYR_EMO,
+
+ // os switchers
+ OS_LIN,
+ OS_WIN,
+ OS_MAC,
+};
+
+// unicode map
+
+enum unicode_name {
+ GRIN, // grinning face 😊
+ TJOY, // tears of joy 😂
+ SMILE, // grining face with smiling eyes 😁
+ HEART, // heart ❤
+ EYERT, // smiling face with heart shaped eyes 😍
+ CRY, // crying face 😭
+ SMEYE, // smiling face with smiling eyes 😊
+ UNAMU, // unamused 😒
+ KISS, // kiss 😘
+ HART2, // two hearts 💕
+ WEARY, // weary 😩
+ OKHND, // ok hand sign 👌
+ PENSV, // pensive 😔
+ SMIRK, // smirk 😏
+ RECYC, // recycle ♻
+ WINK, // wink 😉
+ THMUP, // thumb up 👍
+ THMDN, // thumb down 👎
+ PRAY, // pray 🙏
+ PHEW, // relieved 😌
+ MUSIC, // musical notes
+ FLUSH, // flushed 😳
+ CELEB, // celebration 🙌
+ CRY2, // crying face 😢
+ COOL, // smile with sunglasses 😎
+ NOEVS, // see no evil
+ NOEVH, // hear no evil
+ NOEVK, // speak no evil
+ POO, // pile of poo
+ EYES, // eyes
+ VIC, // victory hand
+ BHART, // broken heart
+ SLEEP, // sleeping face
+ SMIL2, // smiling face with open mouth & sweat
+ HUNRD, // 100
+ CONFU, // confused
+ TONGU, // face with tongue & winking eye
+ DISAP, // disappointed
+ YUMMY, // face savoring delicious food
+ CLAP, // hand clapping
+ FEAR, // face screaming in fear
+ HORNS, // smiling face with horns
+ HALO, // smiling face with halo
+ BYE, // waving hand
+ SUN, // sun
+ MOON, // moon
+ SKULL, // skull
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+ [GRIN] = 0x1F600,
+ [TJOY] = 0x1F602,
+ [SMILE] = 0x1F601,
+ [HEART] = 0x2764,
+ [EYERT] = 0x1f60d,
+ [CRY] = 0x1f62d,
+ [SMEYE] = 0x1F60A,
+ [UNAMU] = 0x1F612,
+ [KISS] = 0x1F618,
+ [HART2] = 0x1F495,
+ [WEARY] = 0x1F629,
+ [OKHND] = 0x1F44C,
+ [PENSV] = 0x1F614,
+ [SMIRK] = 0x1F60F,
+ [RECYC] = 0x267B,
+ [WINK] = 0x1F609,
+ [THMUP] = 0x1F44D,
+ [THMDN] = 0x1F44E,
+ [PRAY] = 0x1F64F,
+ [PHEW] = 0x1F60C,
+ [MUSIC] = 0x1F3B6,
+ [FLUSH] = 0x1F633,
+ [CELEB] = 0x1F64C,
+ [CRY2] = 0x1F622,
+ [COOL] = 0x1F60E,
+ [NOEVS] = 0x1F648,
+ [NOEVH] = 0x1F649,
+ [NOEVK] = 0x1F64A,
+ [POO] = 0x1F4A9,
+ [EYES] = 0x1F440,
+ [VIC] = 0x270C,
+ [BHART] = 0x1F494,
+ [SLEEP] = 0x1F634,
+ [SMIL2] = 0x1F605,
+ [HUNRD] = 0x1F4AF,
+ [CONFU] = 0x1F615,
+ [TONGU] = 0x1F61C,
+ [DISAP] = 0x1F61E,
+ [YUMMY] = 0x1F60B,
+ [CLAP] = 0x1F44F,
+ [FEAR] = 0x1F631,
+ [HORNS] = 0x1F608,
+ [HALO] = 0x1F607,
+ [BYE] = 0x1F44B,
+ [SUN] = 0x2600,
+ [MOON] = 0x1F314,
+ [SKULL] = 0x1F480,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* qwerty */
+ [QWE] = KEYMAP(
+ KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+
+ MO(EMO), MO(SYS), KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_MNXT, KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_MPLY, KC_MUTE, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_UP, KC_P4, KC_P5, KC_P6, KC_PCMM,
+ KC_MPRV, KC_VOLD, KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, KC_LEFT, TG(MOU), KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_LGUI, KC_APP, KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_DOWN, XXXXXXX, KC_P0, KC_PDOT, XXXXXXX
+ ),
+
+ /* colemak */
+ [COL] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ /* workman */
+ [WOR] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ /* dvorak */
+ [DVO] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ /* system */
+ [SYS] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, LAY_QWE, OS_WIN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, LAY_DVO, _______, _______, _______, _______, LAY_WOR, OS_LIN, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, LAY_COL, _______, _______, _______, OS_MAC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ /* mouse keys */
+ [MOU] = KEYMAP(
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, KC_BTN4, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_U, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, KC_BTN5, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, _______, KC_MS_R, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ KC_BTN1, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_D, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+ ),
+
+ /* emoji */
+ [EMO] = KEYMAP(
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY), X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN), X(HEART),X(BYE), X(KISS), X(CELEB),X(COOL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,X(SLEEP),X(CLAP), X(CRY), X(VIC), X(BHART),X(SUN), X(SMEYE),X(WINK), X(MOON), X(CONFU), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+ ),
+
+ /*
+ [XXX] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ */
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ /* layout switcher */
+ case LAY_QWE:
+ if (record->event.pressed) {
+ persistant_default_layer_set(1UL<<QWE);
+ }
+ return false;
+ break;
+ case LAY_COL:
+ if (record->event.pressed) {
+ persistant_default_layer_set(1UL<<COL);
+ }
+ return false;
+ break;
+ case LAY_WOR:
+ if (record->event.pressed) {
+ persistant_default_layer_set(1UL<<WOR);
+ }
+ return false;
+ break;
+ case LAY_DVO:
+ if (record->event.pressed) {
+ persistant_default_layer_set(1UL<<DVO);
+ }
+ return false;
+ break;
+
+ /* os switcher */
+ case OS_LIN:
+ set_unicode_input_mode(UC_LNX);
+ return false;
+ break;
+ case OS_WIN:
+ set_unicode_input_mode(UC_WINC);
+ return false;
+ break;
+ case OS_MAC:
+ set_unicode_input_mode(UC_OSX);
+ return false;
+ break;
+
+ }
+ return true;
+}
+
+void matrix_init_user() {
+ set_unicode_input_mode(UC_LNX);
+}
--- /dev/null
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ uint8_t ps2_led = 0;
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ ps2_led |= (1<<PS2_LED_NUM_LOCK);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+ ps2_host_set_led(ps2_led);
+}
--- /dev/null
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+#define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+#define print_matrix_header() print("\nr/c 01234567\n")
+#define matrix_bitpop(i) bitpop(matrix[i])
+#define ROW_SHIFTER ((uint8_t)1)
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
+ *
+ * 8bit wide
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code) (code>>3)
+#define COL(code) (code&0x07)
+
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+void matrix_init(void)
+{
+ debug_enable = true;
+ //debug_matrix = true;
+ //debug_keyboard = true;
+ //debug_mouse = false;
+
+ ps2_host_init();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+ matrix_init_user();
+ return;
+}
+
+uint8_t matrix_scan(void)
+{
+
+ // scan code reading states
+ static enum {
+ RESET,
+ RESET_RESPONSE,
+ KBD_ID0,
+ KBD_ID1,
+ CONFIG,
+ READY,
+ F0,
+ } state = RESET;
+
+ uint8_t code;
+ if ((code = ps2_host_recv())) {
+ debug("r"); debug_hex(code); debug(" ");
+ }
+
+ switch (state) {
+ case RESET:
+ debug("wFF ");
+ if (ps2_host_send(0xFF) == 0xFA) {
+ debug("[ack]\nRESET_RESPONSE: ");
+ state = RESET_RESPONSE;
+ }
+ break;
+ case RESET_RESPONSE:
+ if (code == 0xAA) {
+ debug("[ok]\nKBD_ID: ");
+ state = KBD_ID0;
+ } else if (code) {
+ debug("err\nRESET: ");
+ state = RESET;
+ }
+ break;
+ // after reset receive keyboad ID(2 bytes)
+ case KBD_ID0:
+ if (code) {
+ state = KBD_ID1;
+ }
+ break;
+ case KBD_ID1:
+ if (code) {
+ debug("\nCONFIG: ");
+ state = CONFIG;
+ }
+ break;
+ case CONFIG:
+ debug("wF8 ");
+ if (ps2_host_send(0xF8) == 0xFA) {
+ debug("[ack]\nREADY\n");
+ state = READY;
+ }
+ break;
+ case READY:
+ switch (code) {
+ case 0x00:
+ break;
+ case 0xF0:
+ state = F0;
+ debug(" ");
+ break;
+ default: // normal key make
+ if (code < 0x88) {
+ matrix_make(code);
+ } else {
+ debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
+ }
+ state = READY;
+ debug("\n");
+ }
+ break;
+ case F0: // Break code
+ switch (code) {
+ case 0x00:
+ break;
+ default:
+ if (code < 0x88) {
+ matrix_break(code);
+ } else {
+ debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+ }
+ state = READY;
+ debug("\n");
+ }
+ break;
+ }
+ return 1;
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+inline
+static void matrix_make(uint8_t code)
+{
+ if (!matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] |= 1<<COL(code);
+ }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+ if (matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] &= ~(1<<COL(code));
+ }
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix_get_row(row) & (1<<col));
+}
+
+void matrix_print(void)
+{
+#if (MATRIX_COLS <= 8)
+ print("r/c 01234567\n");
+#elif (MATRIX_COLS <= 16)
+ print("r/c 0123456789ABCDEF\n");
+#elif (MATRIX_COLS <= 32)
+ print("r/c 0123456789ABCDEF0123456789ABCDEF\n");
+#endif
+
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+
+#if (MATRIX_COLS <= 8)
+ xprintf("%02X: %08b%s\n", row, bitrev(matrix_get_row(row)),
+#elif (MATRIX_COLS <= 16)
+ xprintf("%02X: %016b%s\n", row, bitrev16(matrix_get_row(row)),
+#elif (MATRIX_COLS <= 32)
+ xprintf("%02X: %032b%s\n", row, bitrev32(matrix_get_row(row)),
+#endif
+#ifdef MATRIX_HAS_GHOST
+ matrix_has_ghost_in_row(row) ? " <ghost" : ""
+#else
+ ""
+#endif
+ );
+ }
+}
+
+#ifdef MATRIX_HAS_GHOST
+__attribute__ ((weak))
+bool matrix_has_ghost_in_row(uint8_t row)
+{
+ matrix_row_t matrix_row = matrix_get_row(row);
+ // No ghost exists when less than 2 keys are down on the row
+ if (((matrix_row - 1) & matrix_row) == 0)
+ return false;
+
+ // Ghost occurs when the row shares column line with other row
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ if (i != row && (matrix_get_row(i) & matrix_row))
+ return true;
+ }
+ return false;
+}
+#endif
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no # MIDI controls
+AUDIO_ENABLE ?= no # Audio output on port C6
+UNICODE_ENABLE ?= no # Unicode
+UNICODEMAP_ENABLE ?= yes
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+PS2_USE_USART ?= yes
+API_SYSEX_ENABLE ?= n
+CUSTOM_MATRIX = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+
+SRC = matrix.c led.c
\ No newline at end of file
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
+#define USB_MAX_POWER_CONSUMPTION 50
+
/*
* Feature disable options
* These options are also useful to firmware size reduction.
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
- * | BkSp | A | S | D | F | G |------| |------| H |J/Alt | K | L |; / L2|' / Cmd |
+ * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd |
* |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------|
* | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
KC_HOME,
KC_SPC,KC_BSPC,KC_END,
// right hand
- KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
- TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
- KC_H, ALT_T(KC_J), KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
- MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT,
- KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1,
+ KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+ TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
+ KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+ MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT,
+ KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1,
KC_LALT, CTL_T(KC_ESC),
KC_PGUP,
KC_PGDN,KC_TAB, KC_ENT
DEBUG_ENABLE = no
CONSOLE_ENABLE = no
TAP_DANCE_ENABLE = yes
-MOUSEKEY_ENABLE = no
+MOUSEKEY_ENABLE = yes
* KEY_NAV: arrow key movement with backward/forward word support, and copy/paste.
* KEY_SEL: same as above, but every movement shift-selects.
* NUMBER: keypad layer.
-* SYMBOL: all the symbols as well as brackets at the bottom.
+* SYMBOL: all the symbols.
+* BRACKET: special brackets-only layer for programming
* SHORTCUTS: sends Hyper keys for Autohotkey to interpret. I use this to switch between specific apps.
+* MOUSE: use mouse keys
+
+Updates
+-------
+
+2016/12/10:
+* toggle for brackets layer is now on left thumb cluster.
+
+2016/11/05:
+* removed brackets anywhere but in brackets layer
+* added mouse layer back in
+* put semicolon-newline and end-newline on symbol layer
+* replaced all HYPR with MEH, added more shortcut keys
\ No newline at end of file
#define SYMBOL 6
#define BRACKETS 7
#define SHORTCUTS 8
+#define MOUSE 9
// macros
#define MC_COPY_LINE 0
[BASE] = KEYMAP( // layer 0 : default
// left hand
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
- LT(BRACKETS,KC_TAB), KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, MO(KEY_SEL),
+ LT(MOUSE,KC_TAB), KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, MO(KEY_SEL),
MO(SHELL_NAV), KC_A, KC_O, KC_E, KC_U, KC_I,
KC_FN3, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(KEY_NAV),
OSL(SHORTCUTS),KC_FN4, KC_FN5,OSL(SYMBOL),MO(NUMBER),
// thumb cluster
- RCTL(KC_F), RCTL(KC_S),
- RCTL(KC_DEL),
+ MO(BRACKETS), RCTL(KC_S),
+ RCTL(KC_DEL),
KC_BSPC,RCTL(KC_BSPC),KC_DEL,
// right hand
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSLS,
KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,
KC_PGDN, KC_B, KC_M, KC_W, KC_V, KC_Z, TD(TD_SHIFT_CAPSLOCK),
// lower keys - browser tab control
- RSFT(RCTL(KC_TAB)), RCTL(KC_TAB), RCTL(KC_T), RCTL(KC_K), RCTL(KC_W),
+ RSFT(RCTL(KC_TAB)), RCTL(KC_TAB), RCTL(KC_T), LALT(KC_LEFT), RCTL(KC_W),
// thumb cluster
- M(SEMICOLON_NEWLINE), M(END_NEWLINE),
+ KC_HOME,KC_END,
KC_UP,
KC_DOWN,KC_ENT, KC_SPC
),
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
RCTL(KC_L), RCTL(KC_W), KC_HOME, KC_UP, KC_END, LALT(KC_D), RCTL(KC_R),
LALT(KC_B), KC_LEFT, KC_DOWN, KC_RIGHT, LALT(KC_F), LALT(KC_DOT),
- RCTL(KC_C), RCTL(KC_U), M(SCREEN_COPY_MODE), M(SCREEN_PASTE), HYPR(KC_V), RCTL(KC_K), M(SHELL_RECALL_LAST_ARG_REMOVE_FIRST_COMMAND),
+ RCTL(KC_C), RCTL(KC_U), M(SCREEN_COPY_MODE), M(SCREEN_PASTE), MEH(KC_V), RCTL(KC_K), M(SHELL_RECALL_LAST_ARG_REMOVE_FIRST_COMMAND),
// bottom row
M(SCREEN_TAB_LEFT), M(SCREEN_TAB_RIGHT), M(SCREEN_NEW_TAB), KC_TRNS, KC_TRNS,
// thumb cluster
[SYMBOL] = KEYMAP(
// left hand
- KC_NO,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
- KC_TRNS,KC_TRNS, M(OPEN_CLOSE_PAREN), KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS,
- KC_TRNS,KC_TRNS, M(OPEN_CLOSE_BRACKET), KC_LBRC, KC_RBRC, M(OPEN_CLOSE_DOUBLE_QUOTE),
- KC_TRNS,M(SEMICOLON_NEWLINE),M(OPEN_CLOSE_CURLY), KC_LCBR, KC_RCBR, M(OPEN_CLOSE_SINGLE_QUOTE),KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,
// right hand
- KC_LPRN, KC_RPRN, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_PLUS, KC_AMPR, KC_ASTR, KC_GRAVE,KC_TILD, KC_TRNS,
KC_MINS, KC_DLR, KC_PERC, KC_CIRC, KC_PIPE, KC_TRNS,
KC_TRNS, KC_EQUAL,KC_EXLM, KC_AT, KC_HASH, KC_TRNS, KC_TRNS,
- KC_LBRC, KC_RBRC, TD(TD_BRK_LEFT), TD(TD_BRK_RIGHT), KC_TRNS,
- KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ M(SEMICOLON_NEWLINE), M(END_NEWLINE),
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
[SHORTCUTS] = KEYMAP(
// left hand
- KC_NO, HYPR(KC_F1), HYPR(KC_F2), HYPR(KC_F3), HYPR(KC_F4), HYPR(KC_F5), HYPR(KC_F6),
+ KC_NO, MEH(KC_F1), MEH(KC_F2), MEH(KC_F3), MEH(KC_F4), MEH(KC_F5), MEH(KC_F6),
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
- KC_TRNS,KC_TRNS,
- KC_TRNS,
- KC_TRNS,KC_TRNS,KC_TRNS,
+ MEH(KC_0),MEH(KC_1),
+ MEH(KC_2),
+ MEH(KC_3),MEH(KC_4),MEH(KC_5),
// right hand
- HYPR(KC_F7), HYPR(KC_F8), HYPR(KC_F9), HYPR(KC_F10), HYPR(KC_F11), HYPR(KC_F12), M(SWITCH_NDS),
- KC_TRNS, HYPR(KC_A), HYPR(KC_B), HYPR(KC_C), HYPR(KC_D), HYPR(KC_E), HYPR(KC_F),
- HYPR(KC_G), HYPR(KC_H), HYPR(KC_I), HYPR(KC_J), HYPR(KC_K), HYPR(KC_L),
- KC_TRNS, HYPR(KC_M), HYPR(KC_N), HYPR(KC_O), HYPR(KC_P), HYPR(KC_Q), HYPR(KC_R),
- LALT(KC_LEFT),LALT(KC_RIGHT),KC_F5, LCTL(LGUI(KC_LEFT)), LCTL(LGUI(KC_RIGHT)),
+ MEH(KC_F7), MEH(KC_F8), MEH(KC_F9), MEH(KC_F10), MEH(KC_F11), MEH(KC_F12), M(SWITCH_NDS),
+ KC_TRNS, MEH(KC_A), MEH(KC_B), MEH(KC_C), MEH(KC_D), MEH(KC_E), MEH(KC_F),
+ MEH(KC_G), MEH(KC_H), MEH(KC_I), MEH(KC_J), MEH(KC_K), MEH(KC_L),
+ KC_TRNS, MEH(KC_M), MEH(KC_N), MEH(KC_O), MEH(KC_P), MEH(KC_Q), MEH(KC_R),
+ MEH(KC_S), MEH(KC_T), MEH(KC_U), MEH(KC_V), MEH(KC_X),
+ MEH(KC_6), MEH(KC_7),
+ MEH(KC_8),
+ MEH(KC_9), MEH(KC_Y), MEH(KC_Z)
+),
+
+
+[MOUSE] = KEYMAP(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS,
+ KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS,
+ // right hand
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
- KC_TRNS, KC_TRNS, KC_TRNS
+ KC_TRNS, KC_BTN1, KC_BTN2
),
-
};
--- /dev/null
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+ PLACEHOLDER = SAFE_RANGE, // can always be here
+ EPRM,
+ VRSN,
+ RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | App | LGui | | Alt |Ctrl/Esc|
+ * ,------|------|------| |------+--------+------.
+ * | | | Home | | PgUp | | |
+ * | Space|Backsp|------| |------| Tab |Enter |
+ * | |ace | End | | PgDn | | |
+ * `--------------------' `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP( // layer 0 : default
+ // left hand
+ EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM,
+ EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM,
+ EPRM, EPRM, EPRM, EPRM, EPRM, EPRM,
+ EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM,
+ EPRM, EPRM, EPRM, EPRM,EPRM,
+ EPRM, EPRM,
+ EPRM,
+ EPRM,EPRM,EPRM,
+ // right hand
+ EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM,
+ EPRM, EPRM, EPRM, EPRM, EPRM, EPRM, EPRM,
+ EPRM, EPRM, EPRM, EPRM, EPRM,EPRM,
+ EPRM,EPRM, EPRM, EPRM,EPRM, EPRM, EPRM,
+ EPRM, EPRM,EPRM,EPRM, EPRM,
+ EPRM, EPRM,
+ EPRM,
+ EPRM,EPRM, EPRM
+ )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+ }
+ break;
+ case 1:
+ if (record->event.pressed) { // For resetting EEPROM
+ eeconfig_init();
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ // dynamically generate these.
+ case EPRM:
+ if (record->event.pressed) {
+ eeconfig_init();
+ }
+ return false;
+ break;
+ case VRSN:
+ if (record->event.pressed) {
+ SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+ }
+ return false;
+ break;
+ case RGB_SLD:
+ if (record->event.pressed) {
+ #ifdef RGBLIGHT_ENABLE
+ rgblight_mode(1);
+ #endif
+ }
+ return false;
+ break;
+ }
+ return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+ uint8_t layer = biton32(layer_state);
+
+ ergodox_board_led_off();
+ ergodox_right_led_1_off();
+ ergodox_right_led_2_off();
+ ergodox_right_led_3_off();
+ switch (layer) {
+ // TODO: Make this relevant to the ErgoDox EZ.
+ case 1:
+ ergodox_right_led_1_on();
+ break;
+ case 2:
+ ergodox_right_led_2_on();
+ break;
+ default:
+ // none
+ break;
+ }
+
+};
--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER You
+#define PRODUCT pilcrow
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B4, F7, B1, B3 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6, F5, F6, B6, B2, F4, B5}
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "pilcrow.h"
+#define _______ KC_TRNS
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( \
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \
+ KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[1] = KEYMAP( \
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+ KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \
+ _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \
+),
+[2] = KEYMAP( \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \
+ KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \
+ OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \
+ _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[3] = KEYMAP( \
+ RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \
+ KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \
+ _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
--- /dev/null
+# The default keymap for pilcrow
\ No newline at end of file
--- /dev/null
+#include "pilcrow.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+#ifndef PILCROW_H
+#define PILCROW_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \
+}
+
+#endif
--- /dev/null
+pilcrow keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
--- /dev/null
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
#include "config_common.h"
+#define USB_VENDOR_ID_LENOVO 0x17ef
+#define USB_DEVICE_ID_LENOVO_TPKBD 0x6009
+#define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047
+#define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048
+#define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067
+
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6660
+#define VENDOR_ID USB_VENDOR_ID_LENOVO
+#define PRODUCT_ID USB_DEVICE_ID_LENOVO_CBTKBD
#define DEVICE_VER 0x0001
#define MANUFACTURER Priyadi
#define PRODUCT Promethium Keyboard
-#define DESCRIPTION Promethium Keyboard
+#define DESCRIPTION
/* key matrix size */
#define MATRIX_ROWS 8
*/
[_QWERTY] = KEYMAP(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
- KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT ,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT ,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL
),
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = KEYMAP(
- KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC,
- KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT ,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL
+ _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______,
+ _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______,
+ _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
/* Workman
* `-----------------------------------------------------------------------------------'
*/
[_WORKMAN] = KEYMAP(
- KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC,
- KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT ,
- KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL
+ _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______,
+ _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______,
+ _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
/* Punc
*/
[_GUI] = KEYMAP(
_______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______,
- LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY,
+ LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,KC_PAUS, QWERTY,
WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK,
OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN
),
#endif
switch (keycode) {
+ // QWERTZ style comma and dot: semicolon and colon when shifted
+ case KC_COMM:
+ if (record->event.pressed) {
+ bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT);
+ bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT);
+ if (lshifted || rshifted) {
+ if (lshifted) unregister_code(KC_LSFT);
+ if (rshifted) unregister_code(KC_RSFT);
+ register_code(KC_SCLN);
+ unregister_code(KC_SCLN);
+ if (lshifted) register_code(KC_LSFT);
+ if (rshifted) register_code(KC_RSFT);
+ } else {
+ register_code(KC_COMM);
+ unregister_code(KC_COMM);
+ }
+ }
+ return false;
+ break;
+ case KC_DOT:
+ if (record->event.pressed) {
+ if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) {
+ register_code(KC_SCLN);
+ unregister_code(KC_SCLN);
+ } else {
+ register_code(KC_DOT);
+ unregister_code(KC_DOT);
+ }
+ }
+ return false;
+ break;
+
+ // layout switchers
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
return false;
break;
-
-
+ // layer switcher
case PUNC:
if (record->event.pressed) {
layer_on(_PUNC);
return false;
break;
-
+ // OS switchers
case LINUX:
set_unicode_input_mode(UC_LNX);
#ifdef AUDIO_ENABLE
void ps2_mouse_init_user() {
+ uint8_t rcv;
+
// set TrackPoint sensitivity
PS2_MOUSE_SEND(0xE2, "set trackpoint sensitivity: 0xE2");
PS2_MOUSE_SEND(0x81, "set trackpoint sensitivity: 0x81");
PS2_MOUSE_SEND(0x4A, "set trackpoint sensitivity: 0x4A");
- PS2_MOUSE_SEND(0x60, "set trackpoint sensitivity: 0x60");
+ PS2_MOUSE_SEND(0x49, "set trackpoint sensitivity: 0x59");
+
+ // set TrackPoint Negative Inertia factor
+ PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2");
+ PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81");
+ PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D");
+ PS2_MOUSE_SEND(0x06, "set negative inertia factor: 0x06");
// set TrackPoint speed
// (transfer function upper plateau speed)
PS2_MOUSE_SEND(0xE2, "set trackpoint speed: 0xE2");
PS2_MOUSE_SEND(0x81, "set trackpoint speed: 0x81");
PS2_MOUSE_SEND(0x60, "set trackpoint speed: 0x60");
- PS2_MOUSE_SEND(0x90, "set trackpoint speed: 0x90");
+ PS2_MOUSE_SEND(0x61, "set trackpoint speed: 0x61");
- // set TrackPoint Negative Inertia factor
- PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2");
- PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81");
- PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D");
- PS2_MOUSE_SEND(0x03, "set negative inertia factor: 0x03");
-
- // disable up threshold (click)
- PS2_MOUSE_SEND(0xE2, "set disable up threshold: 0xE2");
- PS2_MOUSE_SEND(0x47, "set disable up threshold: 0x47");
- PS2_MOUSE_SEND(0x2C, "set disable up threshold: 0x2C");
- PS2_MOUSE_SEND(0x01, "set disable up threshold: 0x01");
-
- // enable TrackPoint Press to Select (PtS)
- // print("ps2_mouse_init: send 0xE2: ");
- // rcv = ps2_host_send(0xE2);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x47: ");
- // rcv = ps2_host_send(0x47);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x2C: ");
- // rcv = ps2_host_send(0x2C);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x00: ");
- // rcv = ps2_host_send(0x00);
- // phex(rcv); phex(ps2_error); print("\n");
-
- // set TrackPoint Press to Select threshold
- // print("ps2_mouse_init: send 0xE2: ");
- // rcv = ps2_host_send(0xE2);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x81: ");
- // rcv = ps2_host_send(0x81);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x5C: ");
- // rcv = ps2_host_send(0x5C);
- // phex(rcv); phex(ps2_error); print("\n");
- // // default PtS threshold is 0x08
- // print("ps2_mouse_init: send 0x04: ");
- // rcv = ps2_host_send(0x04);
- // phex(rcv); phex(ps2_error); print("\n");
-
- // set TrackPoint Press to Select time constant (zTc)
- // print("ps2_mouse_init: send 0xE2: ");
- // rcv = ps2_host_send(0xE2);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x81: ");
- // rcv = ps2_host_send(0x81);
- // phex(rcv); phex(ps2_error); print("\n");
- // print("ps2_mouse_init: send 0x5E: ");
- // rcv = ps2_host_send(0x5E);
- // phex(rcv); phex(ps2_error); print("\n");
- // // default zTc is 0x26
- // print("ps2_mouse_init: send 0x45: ");
- // rcv = ps2_host_send(0x45);
- // phex(rcv); phex(ps2_error); print("\n");
-
- /*
- // set TrackPoint Press to Select Jenks Curvature (jkcur)
- print("ps2_mouse_init: send 0xE2: ");
- rcv = ps2_host_send(0xE2);
- phex(rcv); phex(ps2_error); print("\n");
- print("ps2_mouse_init: send 0x81: ");
- rcv = ps2_host_send(0x81);
- phex(rcv); phex(ps2_error); print("\n");
- print("ps2_mouse_init: send 0x5D: ");
- rcv = ps2_host_send(0x5D);
- phex(rcv); phex(ps2_error); print("\n");
- // default jkcur is 0x87
- print("ps2_mouse_init: send 0x87: ");
- rcv = ps2_host_send(0x87);
- phex(rcv); phex(ps2_error); print("\n");
- */
-
- /*
- // set TrackPoint Minimum Drag (mindrag)
- print("ps2_mouse_init: send 0xE2: ");
+ // inquire pts status
rcv = ps2_host_send(0xE2);
- phex(rcv); phex(ps2_error); print("\n");
- print("ps2_mouse_init: send 0x81: ");
- rcv = ps2_host_send(0x81);
- phex(rcv); phex(ps2_error); print("\n");
- print("ps2_mouse_init: send 0x59: ");
- rcv = ps2_host_send(0x59);
- phex(rcv); phex(ps2_error); print("\n");
- // default PtS mindrag is 0x14
- print("ps2_mouse_init: send 0x14: ");
- rcv = ps2_host_send(0x14);
- phex(rcv); phex(ps2_error); print("\n");
- */
+ rcv = ps2_host_send(0x2C);
+ rcv = ps2_host_recv_response();
+ if ((rcv & 1) == 1) {
+ // if on, disable pts
+ rcv = ps2_host_send(0xE2);
+ rcv = ps2_host_send(0x47);
+ rcv = ps2_host_send(0x2C);
+ rcv = ps2_host_send(0x01);
+ }
}
\ No newline at end of file
-
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
PS2_MOUSE_ENABLE ?= yes
PS2_USE_INT ?= yes
+ADAFRUIT_BLE_ENABLE ?= yes
+API_SYSEX_ENABLE ?= no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
* ,-----------------------------------------------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
* |-----------------------------------------------------------------------------------------+
- * | | Led | Led-| Led+| | | | | Psc | Slck| Paus| Up | | |
+ * | CAPS | Led | Led-| Led+| | | | | Psc | Slck| Paus| Up | | |
* |-----------------------------------------------------------------------------------------+
* | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
* |-----------------------------------------------------------------------------------------+
*/
[_FN] = KEYMAP( /* Layer 1 */
______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \
- ______, S_LED, S_LEDI, S_LEDD, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
+ KC_CAPS, S_LED, S_LEDI, S_LEDD, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, ______, \
______, ______, KC_MPRV, KC_MPLY, KC_MNXT,______,______,KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______,______, \
______, ______, ______, ______, KC_DEL, KC_MSTP, ______, ______, ______ \
style="display:inline"><metadata
id="metadata2286"><rdf:RDF><cc:Work
rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs2284"><inkscape:perspective
sodipodi:type="inkscape:persp3d"
inkscape:vp_x="0 : 338.38501 : 1"
id="*Model_Space-0" /><symbol
id="*Paper_Space-5" /><symbol
id="*Paper_Space0-0" /></defs><sodipodi:namedview
- inkscape:window-height="1017"
+ inkscape:window-height="1019"
inkscape:window-width="1920"
inkscape:pageshadow="2"
inkscape:pageopacity="0.0"
bordercolor="#666666"
pagecolor="#ffffff"
id="base"
- inkscape:zoom="0.64873169"
- inkscape:cx="112.50849"
- inkscape:cy="381.60971"
- inkscape:window-x="1912"
- inkscape:window-y="-8"
- inkscape:current-layer="layer9"
+ inkscape:zoom="0.66928853"
+ inkscape:cx="198.17365"
+ inkscape:cy="416.82194"
+ inkscape:window-x="0"
+ inkscape:window-y="0"
+ inkscape:current-layer="g21-5"
showgrid="false"
inkscape:window-maximized="1"
inkscape:document-units="mm"
style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /><path
inkscape:connector-curvature="0"
id="path29"
- d="m 516.30882,655.63475 a 5.2558782,5.2558782 0 1 0 -10.51175,0 5.2558782,5.2558782 0 1 0 10.51175,0 z"
- style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-
opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /><path
+ d="m 521.39659,648.5468 a 5.2558782,5.2558782 0 1 0 -10.51175,0 5.2558782,5.2558782 0 1 0 10.51175,0 z"
+ style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-
miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /><path
inkscape:connector-curvature="0"
id="path31"
d="m 568.78387,625.5946 0.55008,0.0196"
inkscape:connector-curvature="0"
id="path773"
d="m 559.93261,662.46739 -49.05055,0"
- style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /></g><g
+ style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /><path
+ inkscape:connector-curvature="0"
+ id="path27-0"
+ d="m 306.39384,853.88036 a 5.25588,5.25588 0 1 0 -10.51176,0 5.25588,5.25588 0 0 0 10.51176,0 z"
+ style="display:inline;fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /></g><g
id="g21-5"
inkscape:label="0"
transform="matrix(0.8,0,0,0.8,-113.89463,-231.54592)"
- style="stroke:#0000ff;stroke-opacity:1;stroke-width:0.
03543307;stroke-miterlimit:4;stroke-dasharray:none"><path
+ style="stroke:#0000ff;stroke-opacity:1;stroke-width:0.
35433071;stroke-miterlimit:4;stroke-dasharray:none"><path
inkscape:connector-curvature="0"
id="path23-4"
d="m 240.31326,720.37047 a 5.2558782,5.2558782 0 1 0 -10.51175,0 5.2558782,5.2558782 0 1 0 10.51175,0 z"
style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /><path
inkscape:connector-curvature="0"
id="path29-1"
- d="m 516.30882,655.63475 a 5.2558782,5.2558782 0 1 0 -10.51175,0 5.2558782,5.2558782 0 1 0 10.51175,0 z"
- style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-
opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /><path
+ d="m 523.39658,648.54862 a 5.2558782,5.2558782 0 1 0 -10.51175,0 5.2558782,5.2558782 0 1 0 10.51175,0 z"
+ style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-
miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /><path
inkscape:connector-curvature="0"
id="path31-6"
d="m 568.78387,625.5946 0.55008,0.0196"
inkscape:connector-curvature="0"
id="path197-7"
d="m 175.31728,625.5897 393.46659,0.005"
- style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /></g></g></svg>
\ No newline at end of file
+ style="fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none" /><path
+ inkscape:connector-curvature="0"
+ id="path27-4-7"
+ d="m 304.74973,853.92004 a 5.25588,5.25588 0 1 0 -10.51176,0 5.25588,5.25588 0 0 0 10.51176,0 z"
+ style="display:inline;fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /></g></g></svg>
\ No newline at end of file
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = yes # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
-# Please remove if no longer applicable
-$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD)
-$(warning Please disable some options in the Makefile to resolve)
-
-
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
+COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
UNICODEMAP_ENABLE = yes # Unicode map
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
*/
[_QWERTY] = {
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
- {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT },
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT},
{KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL}
},
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = {
- {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
- {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT },
- {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT},
- {KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL}
+ {_______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______},
+ {_______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______},
+ {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Workman
* `-----------------------------------------------------------------------------------'
*/
[_WORKMAN] = {
- {KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC},
- {KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT },
- {KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT},
- {KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL}
+ {_______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______},
+ {_______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______},
+ {_______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Punc
float tone_windows[][2] = SONG(SCROLL_LOCK_ON_SOUND);
float tone_osx[][2] = SONG(NUM_LOCK_ON_SOUND);
float tone_click[][2] = SONG(MUSICAL_NOTE(_F3, 2));
+float tone_release[][2] = SONG(MUSICAL_NOTE(_A3, 2));
#endif
void persistant_default_layer_set(uint16_t default_layer) {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
// faux clicky
- if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0);
+ // if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0);
+ #ifdef AUDIO_ENABLE
+ if (record->event.pressed) {
+ PLAY_NOTE_ARRAY(tone_click, false, 0);
+ } else {
+ PLAY_NOTE_ARRAY(tone_release, false, 0);
+ }
+ #endif
switch (keycode) {
+ // QWERTZ style comma and dot: semicolon and colon when shifted
+ case KC_COMM:
+ if (record->event.pressed) {
+ bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT);
+ bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT);
+ if (lshifted || rshifted) {
+ if (lshifted) unregister_code(KC_LSFT);
+ if (rshifted) unregister_code(KC_RSFT);
+ register_code(KC_SCLN);
+ unregister_code(KC_SCLN);
+ if (lshifted) register_code(KC_LSFT);
+ if (rshifted) register_code(KC_RSFT);
+ } else {
+ register_code(KC_COMM);
+ unregister_code(KC_COMM);
+ }
+ }
+ return false;
+ break;
+ case KC_DOT:
+ if (record->event.pressed) {
+ if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) {
+ register_code(KC_SCLN);
+ unregister_code(KC_SCLN);
+ } else {
+ register_code(KC_DOT);
+ unregister_code(KC_DOT);
+ }
+ }
+ return false;
+ break;
+
+ // layout switcher
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
}
return false;
break;
+
+ // layer switchers
case PUNC:
if (record->event.pressed) {
layer_on(_PUNC);
}
return false;
break;
+
+ // OS switchers
case LINUX:
set_unicode_input_mode(UC_LNX);
#ifdef AUDIO_ENABLE
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+API_SYSEX_ENABLE = no # Disable extra stuff for ergodoxen
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+COMMAND_ENABLE ?= no # Commands for debug and configuration
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no # MIDI controls
-AUDIO_ENABLE ?= no # Audio output on port C6
+MIDI_ENABLE ?= yes # MIDI controls
+AUDIO_ENABLE ?= yes # Audio output on port C6
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER XIUDI
+#define PRODUCT XD60
+#define DESCRIPTION XD60 Keyboard by XIUDI
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
--- /dev/null
+#include "xd60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // 0: Base Layer
+ KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+ // 1: Function Layer
+ KEYMAP(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \
+ KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
+ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_NO, KC_APP, BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_NO, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ // MACRODOWN only works in this function
+
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+
+ return MACRO_NONE;
+};
+
+void matrix_scan_user(void) {
+
+ // Layer LED indicators
+ uint32_t layer = layer_state;
+
+ if (layer & (1<<1)) {
+ xd60_esc_led_on();
+ } else {
+ xd60_esc_led_off();
+ }
+
+ /*
+ if (layer & (1<<2)) {
+ xd60_poker_leds_on();
+ xd60_esc_led_on();
+ } else {
+ xd60_poker_leds_off();
+ xd60_esc_led_off();
+ }
+ */
+};
--- /dev/null
+# Default Keymap for XIUDI's 60% XD60 PCB
+
+
+
+## Additional Notes
+Default Keymap for XD60 as indicated on the original sale page.
+
+## Build
+To build the default keymap, simply run `make xd60-default`.
--- /dev/null
+#include "xd60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ // 0: Base Layer
+ KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+ // 1: Function Layer
+ KEYMAP(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \
+ KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP, BL_TOGG, KC_DEL, \
+ F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_PGUP, KC_INS, \
+ KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ // MACRODOWN only works in this function
+
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+
+ return MACRO_NONE;
+};
+
+void matrix_scan_user(void) {
+
+ // Layer LED indicators
+ uint32_t layer = layer_state;
+
+ if (layer & (1<<1)) {
+ xd60_wasd_leds_on();
+ xd60_fn_led_on();
+ xd60_esc_led_on();
+ xd60_poker_leds_on();
+ } else {
+ xd60_wasd_leds_off();
+ xd60_fn_led_off();
+ xd60_esc_led_off();
+ xd60_poker_leds_off();
+ }
+};
--- /dev/null
+# QMK Firmware for XIUDI's 60% XD60 PCB
+
+
+
+
+## Quantum MK Firmware
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Additional Notes
+The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page.
+
+## Build
+To build the default keymap, simply run `make xd60-default`.
--- /dev/null
+# MCU name
+# MCU = at90usb1287
+MCU = atmega32u4
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+# LUFA specific
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
--- /dev/null
+#include "xd60.h"
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ xd60_caps_led_on();
+ } else {
+ xd60_caps_led_off();
+ }
+
+ // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+ // xd60_esc_led_on();
+ // } else {
+ // xd60_esc_led_off();
+ // }
+
+ // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+ // xd60_fn_led_on();
+ // } else {
+ // xd60_fn_led_off();
+ // }
+
+ led_set_user(usb_led);
+}
--- /dev/null
+#ifndef XD60_H
+#define XD60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* XD60 LEDs
+ * GPIO pads
+ * 0 F7 WASD LEDs
+ * 1 F6 ESC LED
+ * 2 F5 FN LED
+ * 3 F4 POKER Arrow LEDs
+ * B2 Capslock LED
+ * B0 not connected
+ */
+inline void xd60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
+inline void xd60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
+inline void xd60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
+inline void xd60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
+inline void xd60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
+
+inline void xd60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void xd60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void xd60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void xd60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void xd60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* XD60 Keymap Definition Macro */
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K47, K3D, K3C, \
+ K40, K41, K42, K45, K4A, K4B, K48, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { K40, K41, K42, KC_NO,KC_NO,K45, KC_NO,K47, K48, K49, K4A, K4B, K4C, K4D } \
+}
+
+#endif
}
void voice_deiterate() {
- voice = (voice - 1) % number_of_voices;
+ voice = (voice - 1 + number_of_voices) % number_of_voices;
}
float voice_envelope(float frequency) {
polyphony_rate = 0;
break;
+ case something:
+ polyphony_rate = 0;
+ switch (compensated_index) {
+ case 0 ... 9:
+ note_timbre = TIMBRE_12;
+ break;
+
+ case 10 ... 19:
+ note_timbre = TIMBRE_25;
+ break;
+
+ case 20 ... 200:
+ note_timbre = .25 + .125 + pow(((float)compensated_index - 20) / (200 - 20), 2)*.125;
+ break;
+
+ default:
+ note_timbre = .25;
+ break;
+ }
+ break;
+
case butts_fader:
polyphony_rate = 0;
switch (compensated_index) {
typedef enum {
default_voice,
+ something,
butts_fader,
octave_crunch,
duty_osc,
#include "process_music.h"
bool music_activated = false;
-uint8_t starting_note = 0x0C;
-int offset = 7;
+uint8_t music_starting_note = 0x0C;
+int music_offset = 7;
// music sequencer
static bool music_sequence_recording = false;
return false;
}
- float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row));
+ float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + SCALE[record->event.key.col + music_offset])/12.0+(MATRIX_ROWS - record->event.key.row));
if (record->event.pressed) {
play_note(freq, 0xF);
if (music_sequence_recording) {
CFLAGS += -fno-strict-aliasing
CPPFLAGS += $(COMPILEFLAGS)
-CPPFLAGS += -fno-exceptions
+CPPFLAGS += -fno-exceptions -std=c++11
LDFLAGS +=-Wl,--gc-sections
uint16_t consumer;
struct __attribute__((packed)) {
- uint8_t x, y, scroll, pan;
+ int8_t x, y, scroll, pan;
} mousemove;
};
};
#include "report.h"
#include "descriptor.h"
+#ifndef USB_MAX_POWER_CONSUMPTION
+#define USB_MAX_POWER_CONSUMPTION 500
+#endif
/*******************************************************************************
* HID Report Descriptors
.ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_REMOTEWAKEUP),
- .MaxPowerConsumption = USB_CONFIG_POWER_MA(500)
+ .MaxPowerConsumption = USB_CONFIG_POWER_MA(USB_MAX_POWER_CONSUMPTION)
},
/*
projects / qmk_firmware.git / commitdiff
