--- /dev/null
+flabbergast's TMK/ChibiOS port
+==============================
+2015/10/16
+
+
+Build
+-----
+$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
+
+$ cd tmk_keyboard
+$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+or
+$ cd tmk_keyboard/tmk_core/tool/chibios
+$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+
+$ cd tmk_keyboard/keyboard/infinity_chibios
+$ make
+
+
+
+
+Chibios Configuration
+---------------------
+halconf.h: for HAL configuration
+ placed in project directory
+ read in chibios/os/hal/hal.mk
+ included in chibios/os/hal/include/hal.h
+mcuconf.h: for MCU configuration
+ placed in project directory
+ included in halconf.h
+
+
+Chibios Term
+------------
+PAL = Port Abstraction Layer
+ palWritePad
+ palReadPad
+ palSetPad
+ chibios/os/hal/include/pal.h
+
+LLD = Low Level Driver
+
+
+Makefile
+--------
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = KL2x
+
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <this_dir>/ld/
+ MCU_LDSCRIPT = MKL26Z64
+
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP = kl2x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/
+ # or <this_dir>/boards
+ BOARD = PJRC_TEENSY_LC
+
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+
+halconf.h
+---------
+
+
+mcuconf.h
+---------
+
+
+chconf.h
+--------
+
+
+ld script
+---------
+--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900
++++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900
+@@ -27,7 +27,8 @@
+ {
+ flash0 : org = 0x00000000, len = 0xc0
+ flashcfg : org = 0x00000400, len = 0x10
+- flash : org = 0x00000410, len = 64k - 0x410
++ flash : org = 0x00000410, len = 62k - 0x410
++ eeprom_emu : org = 0x0000F800, len = 2k
+ ram : org = 0x1FFFF800, len = 8k
+ }
+
+@@ -35,6 +36,10 @@
+ __ram_size__ = LENGTH(ram);
+ __ram_end__ = __ram_start__ + __ram_size__;
+
++__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
++__eeprom_workarea_size__ = LENGTH(eeprom_emu);
++__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
++
+ SECTIONS
+ {
+ . = 0;
+
+
+
+Configuration/Startup for Infinity 60%
+--------------------------------------
+Configuration:
+
+
+Clock:
+Inifinity
+ FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
+ Clock dividor:
+ SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
+ SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
+ SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
+ Internal reference clock:
+ MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
+ MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
+ FLL multipilication:
+ MCG_C4[DMX32] = 1
+ MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz
+
+chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
+ k20x_clock_init(): called in __early_init() defined in board.c
+ disable watchdog and configure clock
+
+ configurable macros:
+ KINETIS_NO_INIT: whether init or not
+ KINETIS_MCG_MODE: clock mode
+ KINETIS_MCG_MODE_FEI
+ KINETIS_MCG_MODE_PEE
+ hal/ports/KINETIS/K20x/hal_lld.h
+
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
+ PALConfig pal_default_config
+ boardInit()
+ __early_init()
+ macro definitions for board infos, freq and mcu type
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
+
+USB
+
+
+Startup
+-------
+ common/ports/ARMCMx/GCC/crt0_v[67]m.s
+ Reset_Handler: startup code
+ common/ports/ARMCMx/GCC/crt1.c
+ __core_init(): weak
+ __early_init(): weak
+ __late_init(): weak
+ __default_exit(): weak
+ called from Reset_Handler of crt0
+ common/ports/ARMCMx/GCC/vector.c
+ common/ports/ARMCMx/GCC/ld/*.ld
+
+chibios/os/common/ports/ARMCMx/compilers/GCC/
+├── crt0_v6m.s
+├── crt0_v7m.s
+├── crt1.c
+├── ld
+│ ├── MK20DX128BLDR3.ld
+│ ├── MK20DX128BLDR4.ld
+│ ├── MK20DX128.ld
+│ ├── MK20DX256.ld
+│ ├── MKL25Z128.ld
+│ ├── MKL26Z128.ld
+│ ├── MKL26Z64.ld
+│ └── STM32L476xG.ld
+├── mk
+│ ├── startup_k20x5.mk
+│ ├── startup_k20x7.mk
+│ ├── startup_k20x.mk
+│ ├── startup_kl2x.mk
+│ └── startup_stm32l4xx.mk
+├── rules.ld
+├── rules.mk
+└── vectors.c
+
+chibios/os/hal/
+├── boards
+│ ├── FREESCALE_FREEDOM_K20D50M
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── MCHCK_K20
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── PJRC_TEENSY_3
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── PJRC_TEENSY_3_1
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── PJRC_TEENSY_LC
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── readme.txt
+│ ├── simulator
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── ST_NUCLEO_F030R8
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ ├── board.mk
+│ │ └── cfg
+│ │ └── board.chcfg
+├── hal.mk
+├── include
+│ ├── adc.h
+│ ├── can.h
+│ ├── dac.h
+│ ├── ext.h
+│ ├── gpt.h
+│ ├── hal_channels.h
+│ ├── hal_files.h
+│ ├── hal.h
+│ ├── hal_ioblock.h
+│ ├── hal_mmcsd.h
+│ ├── hal_queues.h
+│ ├── hal_streams.h
+│ ├── i2c.h
+│ ├── i2s.h
+│ ├── icu.h
+│ ├── mac.h
+│ ├── mii.h
+│ ├── mmc_spi.h
+│ ├── pal.h
+│ ├── pwm.h
+│ ├── rtc.h
+│ ├── sdc.h
+│ ├── serial.h
+│ ├── serial_usb.h
+│ ├── spi.h
+│ ├── st.h
+│ ├── uart.h
+│ └── usb.h
+├── lib
+│ └── streams
+│ ├── chprintf.c
+│ ├── chprintf.h
+│ ├── memstreams.c
+│ ├── memstreams.h
+│ ├── nullstreams.c
+│ └── nullstreams.h
+├── osal
+│ ├── nil
+│ │ ├── osal.c
+│ │ ├── osal.h
+│ │ └── osal.mk
+│ ├── os-less
+│ │ └── ARMCMx
+│ │ ├── osal.c
+│ │ ├── osal.h
+│ │ └── osal.mk
+│ └── rt
+│ ├── osal.c
+│ ├── osal.h
+│ └── osal.mk
+├── ports
+│ ├── AVR
+│ ├── common
+│ │ └── ARMCMx
+│ │ ├── mpu.h
+│ │ ├── nvic.c
+│ │ └── nvic.h
+│ ├── KINETIS
+│ │ ├── K20x
+│ │ │ ├── hal_lld.c
+│ │ │ ├── hal_lld.h
+│ │ │ ├── kinetis_registry.h
+│ │ │ ├── platform.dox
+│ │ │ ├── platform.mk
+│ │ │ ├── pwm_lld.c
+│ │ │ ├── pwm_lld.h
+│ │ │ ├── spi_lld.c
+│ │ │ └── spi_lld.h
+│ │ ├── KL2x
+│ │ │ ├── hal_lld.c
+│ │ │ ├── hal_lld.h
+│ │ │ ├── kinetis_registry.h
+│ │ │ ├── platform.mk
+│ │ │ ├── pwm_lld.c
+│ │ │ └── pwm_lld.h
+│ │ ├── LLD
+│ │ │ ├── adc_lld.c
+│ │ │ ├── adc_lld.h
+│ │ │ ├── ext_lld.c
+│ │ │ ├── ext_lld.h
+│ │ │ ├── gpt_lld.c
+│ │ │ ├── gpt_lld.h
+│ │ │ ├── i2c_lld.c
+│ │ │ ├── i2c_lld.h
+│ │ │ ├── pal_lld.c
+│ │ │ ├── pal_lld.h
+│ │ │ ├── serial_lld.c
+│ │ │ ├── serial_lld.h
+│ │ │ ├── st_lld.c
+│ │ │ ├── st_lld.h
+│ │ │ ├── usb_lld.c
+│ │ │ └── usb_lld.h
+│ │ └── README.md
+│ ├── LPC
+│ ├── simulator
+│ └── STM32
+├── src
+│ ├── adc.c
+│ ├── can.c
+│ ├── dac.c
+│ ├── ext.c
+│ ├── gpt.c
+│ ├── hal.c
+│ ├── hal_mmcsd.c
+│ ├── hal_queues.c
+│ ├── i2c.c
+│ ├── i2s.c
+│ ├── icu.c
+│ ├── mac.c
+│ ├── mmc_spi.c
+│ ├── pal.c
+│ ├── pwm.c
+│ ├── rtc.c
+│ ├── sdc.c
+│ ├── serial.c
+│ ├── serial_usb.c
+│ ├── spi.c
+│ ├── st.c
+│ ├── uart.c
+│ └── usb.c
+└── templates
+ ├── adc_lld.c
+ ├── adc_lld.h
+ ├── can_lld.c
+ ├── can_lld.h
+ ├── dac_lld.c
+ ├── dac_lld.h
+ ├── ext_lld.c
+ ├── ext_lld.h
+ ├── gpt_lld.c
+ ├── gpt_lld.h
+ ├── halconf.h
+ ├── hal_lld.c
+ ├── hal_lld.h
+ ├── i2c_lld.c
+ ├── i2c_lld.h
+ ├── i2s_lld.c
+ ├── i2s_lld.h
+ ├── icu_lld.c
+ ├── icu_lld.h
+ ├── mac_lld.c
+ ├── mac_lld.h
+ ├── mcuconf.h
+ ├── osal
+ │ ├── osal.c
+ │ ├── osal.h
+ │ └── osal.mk
+ ├── pal_lld.c
+ ├── pal_lld.h
+ ├── platform.mk
+ ├── pwm_lld.c
+ ├── pwm_lld.h
+ ├── rtc_lld.c
+ ├── rtc_lld.h
+ ├── sdc_lld.c
+ ├── sdc_lld.h
+ ├── serial_lld.c
+ ├── serial_lld.h
+ ├── spi_lld.c
+ ├── spi_lld.h
+ ├── st_lld.c
+ ├── st_lld.h
+ ├── uart_lld.c
+ ├── uart_lld.h
+ ├── usb_lld.c
+ └── usb_lld.h
--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+#define KIIBOHD_BOOTLOADER
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
--- /dev/null
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6464
+#define DEVICE_VER 0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/* at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "Input Club"
+#define USBSTR_MANUFACTURER 'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00'
+#define PRODUCT "Infinity keyboard/QMK"
+#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'Q', '\x00', 'M', '\x00', 'K', '\x00'
+/* key matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 7
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Keymap for Infinity prototype */
+//#define INFINITY_PROTOTYPE
+
+/* Keymap for Infinity 1.1a (first revision with LED support) */
+//#define INFINITY_LED
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
--- /dev/null
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "infinity60.h"
--- /dev/null
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum.h"
+
+#ifdef INFINITY_PROTOTYPE
+
+/* Infinity prototype */
+#define KEYMAP( \
+ K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
+ K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
+ K13, K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, \
+ K54, K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, \
+ K06, K16, K26, K36, K46, K56, K66, K76 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06 }, \
+ { K10, K11, K12, K13, K14, K15, K16 }, \
+ { K20, K21, K22, K23, K24, K25, K26 }, \
+ { K30, K31, K32, K33, K34, K35, K36 }, \
+ { K40, K41, K42, K43, K44, K45, K46 }, \
+ { K50, K51, K52, K53, K54, K55, K56 }, \
+ { K60, K61, K62, K63, K64, K65, K66 }, \
+ { K70, K71, K72, K73, K74, K75, K76 }, \
+ { K80, K81, K82, K83, K84, K85, K86 } \
+}
+
+#else
+
+/* Infinity production */
+#define KEYMAP( \
+ K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
+ K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
+ K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
+ K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \
+ K16, K26, K36, K46, K56, K66, K76, K86 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06 }, \
+ { K10, K11, K12, K13, K14, K15, K16 }, \
+ { K20, K21, K22, K23, K24, K25, K26 }, \
+ { K30, K31, K32, K33, K34, K35, K36 }, \
+ { K40, K41, K42, K43, K44, K45, K46 }, \
+ { K50, K51, K52, K53, K54, K55, K56 }, \
+ { K60, K61, K62, K63, K64, K65, K66 }, \
+ { K70, K71, K72, K73, K74, K75, K76 }, \
+ { K80, K81, K82, K83, K84, K85, K86 } \
+}
+
+#endif
+
+#endif
--- /dev/null
+#include "infinity60.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ * |-----------------------------------------------------------|
+ * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0|
+ * |-----------------------------------------------------------'
+ * | |Gui|Alt | Space |Alt |Gui| | |
+ * `-----------------------------------------------------------'
+ */
+ [0] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
+ KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
+ KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,MO(1), \
+ KC_NO, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_NO, KC_NO),
+
+ /* Layer 1: HHKB mode (HHKB Fn)
+ * ,-----------------------------------------------------------.
+ * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
+ * |-----------------------------------------------------------|
+ * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
+ * |-----------------------------------------------------------|
+ * | | | | | | | +| -|End|PgD|Dow| | |
+ * `-----------------------------------------------------------'
+ * | |Gui|Alt | Space |Alt |Gui| | |
+ * `-----------------------------------------------------------'
+ */
+ [1] = KEYMAP(
+ KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \
+ KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+};
+
+const uint16_t fn_actions[] = {
+
+};
+
--- /dev/null
+#include "infinity60.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bksp|
+ * |-----------------------------------------------------------|
+ * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2|
+ * |-----------------------------------------------------------'
+ * |Fn2 |Gui |Alt | Space |RAlt|Prv|PlPs|Next|
+ * `-----------------------------------------------------------'
+ */
+ [0] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, LT(5, KC_ENT), \
+ KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, MO(4), \
+ MO(4), KC_LGUI, KC_LALT, LT(3, KC_SPC), KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
+
+ /* Layer 1: "Toggle" off SpaceFn for League of Legends
+ */
+ [1] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(4), \
+ MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
+
+ /* Layer 2: "Toggle" off SpaceFn for MapleRoyals
+ */
+ [2] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_LSFT, \
+ MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Layer 3: FN layer 1
+ */
+ [3] = KEYMAP(
+ KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
+ KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4), KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP, KC_NO, KC_LPRN, KC_RPRN, KC_DEL, \
+ MO(6), KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_END, KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, \
+ LGUI(KC_SPC), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_CALC, KC_MENU, KC_TRNS, TG(4), \
+ KC_TRNS, KC_TRNS, KC_TRNS, LT(3, KC_SPC), KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU),
+
+ /* Layer 4: FN layer 2
+ */
+ [4] = KEYMAP(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PMNS, KC_PPLS, KC_PSLS, TG(2), \
+ KC_CAPS, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_NO, KC_P7, KC_P8, KC_P9, KC_PAST, KC_BSPC, \
+ KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P4, KC_P5, KC_P6, KC_PENT, \
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_RSFT, MO(4), \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_PDOT, KC_NO, TG(1)),
+
+ /* Layer 5: FN layer 3
+ */
+ [5] = KEYMAP(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_TAB , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F13, KC_F14, KC_F15, KC_F16, KC_NO, KC_TRNS, \
+ KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F17, KC_F18, KC_F19, KC_F20, LT(5, KC_ENT), \
+ KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F21, KC_F22, KC_F23, KC_F24, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_NO, KC_NO, KC_NO),
+
+ /* Layer 6: FN layer 4
+ */
+ [6] = KEYMAP(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ LCTL(LSFT(KC_TAB)), KC_NO, LGUI(KC_UP), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ MO(6), LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
--- /dev/null
+#include "infinity60.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ * |-----------------------------------------------------------|
+ * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0|
+ * |-----------------------------------------------------------'
+ * | |Gui|Alt | Space |Alt |Gui| | |
+ * `-----------------------------------------------------------'
+ */
+ [0] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(3, KC_SCLN), KC_QUOT,MT(KC_RCTL, KC_ENT), \
+ OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, LT(2, KC_SLSH), KC_RSFT,TG(1), \
+ KC_NO, KC_LGUI,KC_LALT, LT(4, KC_SPC), MO(4), KC_RGUI,KC_NO, KC_NO),
+
+ /* Layer 1: HHKB mode (HHKB Fn)
+ * ,-----------------------------------------------------------.
+ * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
+ * |-----------------------------------------------------------|
+ * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
+ * |-----------------------------------------------------------|
+ * | | | | | | | +| -|End|PgD|Dow| | |
+ * `-----------------------------------------------------------'
+ * | |Gui|Alt | Space |Alt |Gui| | |
+ * `-----------------------------------------------------------'
+ */
+ [1] = KEYMAP(
+ KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS,KC_BSPC, \
+ KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, \
+ KC_LSFT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS, \
+ KC_TRNS,KC_LGUI,KC_LALT, KC_TRNS, KC_RALT,KC_RGUI,KC_TRNS,KC_TRNS),
+
+ /* Layer 2: Vi mode[Slash]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
+ * |-----------------------------------------------------------|
+ * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | |
+ * `-----------------------------------------------------------'
+ * |Gui|Alt | Space |Alt |Gui|
+ * `-------------------------------------------'
+ */
+ [2] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ KC_TAB, KC_HOME,KC_PGDN,KC_UP, KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO, KC_NO, KC_NO, KC_BSPC, \
+ KC_LCTL,KC_NO, KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,KC_NO, KC_NO, KC_ENT, \
+ KC_LSFT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME,KC_PGDN,KC_PGUP,KC_END, LT(2, KC_SLSH), KC_RSFT,KC_TRNS, \
+ KC_TRNS,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_TRNS, KC_TRNS),
+
+ /* Layer 3: Mouse mode(IJKL)[Semicolon]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+ * |-----------------------------------------------------------|
+ * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
+ * `-----------------------------------------------------------'
+ * |Gui |Alt | Mb1 |Fn |Fn |
+ * `--------------------------------------------'
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+ */
+ [3] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R, ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), \
+ KC_LCTL, KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, LT(3, KC_SCLN), KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO, KC_RSFT, KC_TRNS, \
+ KC_TRNS, KC_LGUI,KC_LALT, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ /* Layer 4: Mouse mode(IJKL)[Space]
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+ * |-----------------------------------------------------------|
+ * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+ * |-----------------------------------------------------------|
+ * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
+ * `-----------------------------------------------------------'
+ * |Gui |Alt | Mb1 |Fn |Fn |
+ * `--------------------------------------------'
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+ */
+ [4] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R,KC_BTN4,KC_BTN5,LALT(KC_TAB), \
+ KC_LCTL, KC_VOLD,KC_VOLU,KC_MUTE,KC_NO, KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, KC_BTN1,KC_NO, KC_ENT, \
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT),ALT_T(KC_RGHT),KC_NO, KC_RSFT,KC_TRNS, \
+ KC_TRNS, KC_LGUI,KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS),
+
+};
+
+/*
+ * Fn action definition
+ */
+const uint16_t fn_actions[] = {
+
+};
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+}
--- /dev/null
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "print.h"
+#include "matrix.h"
+
+
+/*
+ * Infinity Pinusage:
+ * Column pins are input with internal pull-down. Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ * INFINITY PRODUCTION (NO LED)
+ * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
+ * row: { PTB0, PTB1, PTB2, PTB3, PTB16, PTB17, PTC4, PTC5, PTD0 }
+ * INFINITY PRODUCTION (WITH LED)
+ * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
+ * row: { PTC0, PTC1, PTC2, PTC3, PTC4, PTC5, PTC6, PTC7, PTD0 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+
+void matrix_init(void)
+{
+ /* Column(sense) */
+ palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 2, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 3, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN);
+
+#ifdef INFINITY_LED
+ /* Row(strobe) */
+ palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 1, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 2, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 6, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 7, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL);
+#else
+ /* Row(strobe) */
+ palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 17, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL);
+#endif
+ memset(matrix, 0, MATRIX_ROWS);
+ memset(matrix_debouncing, 0, MATRIX_ROWS);
+}
+
+uint8_t matrix_scan(void)
+{
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ matrix_row_t data = 0;
+ #ifdef INFINITY_LED
+ // strobe row
+ switch (row) {
+ case 0: palSetPad(GPIOC, 0); break;
+ case 1: palSetPad(GPIOC, 1); break;
+ case 2: palSetPad(GPIOC, 2); break;
+ case 3: palSetPad(GPIOC, 3); break;
+ case 4: palSetPad(GPIOC, 4); break;
+ case 5: palSetPad(GPIOC, 5); break;
+ case 6: palSetPad(GPIOC, 6); break;
+ case 7: palSetPad(GPIOC, 7); break;
+ case 8: palSetPad(GPIOD, 0); break;
+ }
+ #else
+ // strobe row
+ switch (row) {
+ case 0: palSetPad(GPIOB, 0); break;
+ case 1: palSetPad(GPIOB, 1); break;
+ case 2: palSetPad(GPIOB, 2); break;
+ case 3: palSetPad(GPIOB, 3); break;
+ case 4: palSetPad(GPIOB, 16); break;
+ case 5: palSetPad(GPIOB, 17); break;
+ case 6: palSetPad(GPIOC, 4); break;
+ case 7: palSetPad(GPIOC, 5); break;
+ case 8: palSetPad(GPIOD, 0); break;
+ }
+ #endif
+
+ wait_us(1); // need wait to settle pin state
+
+ // read col data
+ data = (palReadPort(GPIOD)>>1);
+ #ifdef INFINITY_LED
+ // un-strobe row
+ switch (row) {
+ case 0: palClearPad(GPIOC, 0); break;
+ case 1: palClearPad(GPIOC, 1); break;
+ case 2: palClearPad(GPIOC, 2); break;
+ case 3: palClearPad(GPIOC, 3); break;
+ case 4: palClearPad(GPIOC, 4); break;
+ case 5: palClearPad(GPIOC, 5); break;
+ case 6: palClearPad(GPIOC, 6); break;
+ case 7: palClearPad(GPIOC, 7); break;
+ case 8: palClearPad(GPIOD, 0); break;
+ }
+ #else
+ // un-strobe row
+ switch (row) {
+ case 0: palClearPad(GPIOB, 0); break;
+ case 1: palClearPad(GPIOB, 1); break;
+ case 2: palClearPad(GPIOB, 2); break;
+ case 3: palClearPad(GPIOB, 3); break;
+ case 4: palClearPad(GPIOB, 16); break;
+ case 5: palClearPad(GPIOB, 17); break;
+ case 6: palClearPad(GPIOC, 4); break;
+ case 7: palClearPad(GPIOC, 5); break;
+ case 8: palClearPad(GPIOD, 0); break;
+ }
+ #endif
+
+ if (matrix_debouncing[row] != data) {
+ matrix_debouncing[row] = data;
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+ }
+
+ if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ matrix[row] = matrix_debouncing[row];
+ }
+ debouncing = false;
+ }
+ return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ xprintf("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ xprintf("%02X: ");
+ matrix_row_t data = matrix_get_row(row);
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ if (data & (1<<col))
+ xprintf("1");
+ else
+ xprintf("0");
+ }
+ xprintf("\n");
+ }
+}
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1 1
+#define KINETIS_CLKDIV1_OUTDIV2 1
+#define KINETIS_CLKDIV1_OUTDIV4 2
+#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+#endif /* _MCUCONF_H_ */
--- /dev/null
+Infinity 60% keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Keymaps
+
+Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
+
+
+## Compiling
+
+Download or clone the whole firmware and navigate to the keyboards/infinity60 folder. Once your dev env is setup, you'll be able to use the `make` command to both compile your keymap and flash it to your keyboard.
+
+To just compile, which generates the output files in the `.build` folder at the root of the repository, run `make keymap`, where keymap is the name of the keymap that you want to compile.
+
+## Flashing
+
+To flash the firmware to the keyboard
+
+1. First press the flash button on the bottom of the keyboard. If you already have a flah button mapped in a keyboard layout running on the keyboard, you can also use that.
+2. Then run `make keymap-dfu-util`, where keymap is the name of the keymap you want to flash. On Linux based operating systems you might need to run the comamnd as root, for example `sudo make keymap-dfu-util` on Ubuntu.
+
+**Tip** `make keymap-dfu-util` will also compile the keymap if needed, so you can skip the compilation step if you want to.
+
--- /dev/null
+# project specific files
+SRC = matrix.c \
+ led.c
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+# KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+# - MKL26Z64 for Teensy LC
+# - MK20DX128 for Teensy 3.0
+# - MK20DX256 for Teensy 3.1 and 3.2
+# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX128BLDR4
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+# - kl2x for Teensy LC
+# - k20x5 for Teensy 3.0 and Infinity KB
+# - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x5
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# - BOARD =
+# - PJRC_TEENSY_LC for Teensy LC
+# - PJRC_TEENSY_3 for Teensy 3.0
+# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+# - MCHCK_K20 for Infinity KB
+BOARD = MCHCK_K20
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes # Mouse keys
+EXTRAKEY_ENABLE ?= yes # Audio control and System control
+CONSOLE_ENABLE ?= yes # Console for debug
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
+++ /dev/null
-flabbergast's TMK/ChibiOS port
-==============================
-2015/10/16
-
-
-Build
------
-$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
-
-$ cd tmk_keyboard
-$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
-or
-$ cd tmk_keyboard/tmk_core/tool/chibios
-$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
-
-$ cd tmk_keyboard/keyboard/infinity_chibios
-$ make
-
-
-
-
-Chibios Configuration
----------------------
-halconf.h: for HAL configuration
- placed in project directory
- read in chibios/os/hal/hal.mk
- included in chibios/os/hal/include/hal.h
-mcuconf.h: for MCU configuration
- placed in project directory
- included in halconf.h
-
-
-Chibios Term
-------------
-PAL = Port Abstraction Layer
- palWritePad
- palReadPad
- palSetPad
- chibios/os/hal/include/pal.h
-
-LLD = Low Level Driver
-
-
-Makefile
---------
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = KL2x
-
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <this_dir>/ld/
- MCU_LDSCRIPT = MKL26Z64
-
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP = kl2x
-
- # Board: it should exist either in <chibios>/os/hal/boards/
- # or <this_dir>/boards
- BOARD = PJRC_TEENSY_LC
-
- MCU = cortex-m0
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
-
-halconf.h
----------
-
-
-mcuconf.h
----------
-
-
-chconf.h
---------
-
-
-ld script
----------
---- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900
-+++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900
-@@ -27,7 +27,8 @@
- {
- flash0 : org = 0x00000000, len = 0xc0
- flashcfg : org = 0x00000400, len = 0x10
-- flash : org = 0x00000410, len = 64k - 0x410
-+ flash : org = 0x00000410, len = 62k - 0x410
-+ eeprom_emu : org = 0x0000F800, len = 2k
- ram : org = 0x1FFFF800, len = 8k
- }
-
-@@ -35,6 +36,10 @@
- __ram_size__ = LENGTH(ram);
- __ram_end__ = __ram_start__ + __ram_size__;
-
-+__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
-+__eeprom_workarea_size__ = LENGTH(eeprom_emu);
-+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-+
- SECTIONS
- {
- . = 0;
-
-
-
-Configuration/Startup for Infinity 60%
---------------------------------------
-Configuration:
-
-
-Clock:
-Inifinity
- FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
- Clock dividor:
- SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
- SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
- SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
- Internal reference clock:
- MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
- MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
- FLL multipilication:
- MCG_C4[DMX32] = 1
- MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz
-
-chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
- k20x_clock_init(): called in __early_init() defined in board.c
- disable watchdog and configure clock
-
- configurable macros:
- KINETIS_NO_INIT: whether init or not
- KINETIS_MCG_MODE: clock mode
- KINETIS_MCG_MODE_FEI
- KINETIS_MCG_MODE_PEE
- hal/ports/KINETIS/K20x/hal_lld.h
-
-
-chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
- PALConfig pal_default_config
- boardInit()
- __early_init()
- macro definitions for board infos, freq and mcu type
-
-chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
-
-USB
-
-
-Startup
--------
- common/ports/ARMCMx/GCC/crt0_v[67]m.s
- Reset_Handler: startup code
- common/ports/ARMCMx/GCC/crt1.c
- __core_init(): weak
- __early_init(): weak
- __late_init(): weak
- __default_exit(): weak
- called from Reset_Handler of crt0
- common/ports/ARMCMx/GCC/vector.c
- common/ports/ARMCMx/GCC/ld/*.ld
-
-chibios/os/common/ports/ARMCMx/compilers/GCC/
-├── crt0_v6m.s
-├── crt0_v7m.s
-├── crt1.c
-├── ld
-│ ├── MK20DX128BLDR3.ld
-│ ├── MK20DX128BLDR4.ld
-│ ├── MK20DX128.ld
-│ ├── MK20DX256.ld
-│ ├── MKL25Z128.ld
-│ ├── MKL26Z128.ld
-│ ├── MKL26Z64.ld
-│ └── STM32L476xG.ld
-├── mk
-│ ├── startup_k20x5.mk
-│ ├── startup_k20x7.mk
-│ ├── startup_k20x.mk
-│ ├── startup_kl2x.mk
-│ └── startup_stm32l4xx.mk
-├── rules.ld
-├── rules.mk
-└── vectors.c
-
-chibios/os/hal/
-├── boards
-│ ├── FREESCALE_FREEDOM_K20D50M
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ └── board.mk
-│ ├── MCHCK_K20
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ └── board.mk
-│ ├── PJRC_TEENSY_3
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ └── board.mk
-│ ├── PJRC_TEENSY_3_1
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ └── board.mk
-│ ├── PJRC_TEENSY_LC
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ └── board.mk
-│ ├── readme.txt
-│ ├── simulator
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ └── board.mk
-│ ├── ST_NUCLEO_F030R8
-│ │ ├── board.c
-│ │ ├── board.h
-│ │ ├── board.mk
-│ │ └── cfg
-│ │ └── board.chcfg
-├── hal.mk
-├── include
-│ ├── adc.h
-│ ├── can.h
-│ ├── dac.h
-│ ├── ext.h
-│ ├── gpt.h
-│ ├── hal_channels.h
-│ ├── hal_files.h
-│ ├── hal.h
-│ ├── hal_ioblock.h
-│ ├── hal_mmcsd.h
-│ ├── hal_queues.h
-│ ├── hal_streams.h
-│ ├── i2c.h
-│ ├── i2s.h
-│ ├── icu.h
-│ ├── mac.h
-│ ├── mii.h
-│ ├── mmc_spi.h
-│ ├── pal.h
-│ ├── pwm.h
-│ ├── rtc.h
-│ ├── sdc.h
-│ ├── serial.h
-│ ├── serial_usb.h
-│ ├── spi.h
-│ ├── st.h
-│ ├── uart.h
-│ └── usb.h
-├── lib
-│ └── streams
-│ ├── chprintf.c
-│ ├── chprintf.h
-│ ├── memstreams.c
-│ ├── memstreams.h
-│ ├── nullstreams.c
-│ └── nullstreams.h
-├── osal
-│ ├── nil
-│ │ ├── osal.c
-│ │ ├── osal.h
-│ │ └── osal.mk
-│ ├── os-less
-│ │ └── ARMCMx
-│ │ ├── osal.c
-│ │ ├── osal.h
-│ │ └── osal.mk
-│ └── rt
-│ ├── osal.c
-│ ├── osal.h
-│ └── osal.mk
-├── ports
-│ ├── AVR
-│ ├── common
-│ │ └── ARMCMx
-│ │ ├── mpu.h
-│ │ ├── nvic.c
-│ │ └── nvic.h
-│ ├── KINETIS
-│ │ ├── K20x
-│ │ │ ├── hal_lld.c
-│ │ │ ├── hal_lld.h
-│ │ │ ├── kinetis_registry.h
-│ │ │ ├── platform.dox
-│ │ │ ├── platform.mk
-│ │ │ ├── pwm_lld.c
-│ │ │ ├── pwm_lld.h
-│ │ │ ├── spi_lld.c
-│ │ │ └── spi_lld.h
-│ │ ├── KL2x
-│ │ │ ├── hal_lld.c
-│ │ │ ├── hal_lld.h
-│ │ │ ├── kinetis_registry.h
-│ │ │ ├── platform.mk
-│ │ │ ├── pwm_lld.c
-│ │ │ └── pwm_lld.h
-│ │ ├── LLD
-│ │ │ ├── adc_lld.c
-│ │ │ ├── adc_lld.h
-│ │ │ ├── ext_lld.c
-│ │ │ ├── ext_lld.h
-│ │ │ ├── gpt_lld.c
-│ │ │ ├── gpt_lld.h
-│ │ │ ├── i2c_lld.c
-│ │ │ ├── i2c_lld.h
-│ │ │ ├── pal_lld.c
-│ │ │ ├── pal_lld.h
-│ │ │ ├── serial_lld.c
-│ │ │ ├── serial_lld.h
-│ │ │ ├── st_lld.c
-│ │ │ ├── st_lld.h
-│ │ │ ├── usb_lld.c
-│ │ │ └── usb_lld.h
-│ │ └── README.md
-│ ├── LPC
-│ ├── simulator
-│ └── STM32
-├── src
-│ ├── adc.c
-│ ├── can.c
-│ ├── dac.c
-│ ├── ext.c
-│ ├── gpt.c
-│ ├── hal.c
-│ ├── hal_mmcsd.c
-│ ├── hal_queues.c
-│ ├── i2c.c
-│ ├── i2s.c
-│ ├── icu.c
-│ ├── mac.c
-│ ├── mmc_spi.c
-│ ├── pal.c
-│ ├── pwm.c
-│ ├── rtc.c
-│ ├── sdc.c
-│ ├── serial.c
-│ ├── serial_usb.c
-│ ├── spi.c
-│ ├── st.c
-│ ├── uart.c
-│ └── usb.c
-└── templates
- ├── adc_lld.c
- ├── adc_lld.h
- ├── can_lld.c
- ├── can_lld.h
- ├── dac_lld.c
- ├── dac_lld.h
- ├── ext_lld.c
- ├── ext_lld.h
- ├── gpt_lld.c
- ├── gpt_lld.h
- ├── halconf.h
- ├── hal_lld.c
- ├── hal_lld.h
- ├── i2c_lld.c
- ├── i2c_lld.h
- ├── i2s_lld.c
- ├── i2s_lld.h
- ├── icu_lld.c
- ├── icu_lld.h
- ├── mac_lld.c
- ├── mac_lld.h
- ├── mcuconf.h
- ├── osal
- │ ├── osal.c
- │ ├── osal.h
- │ └── osal.mk
- ├── pal_lld.c
- ├── pal_lld.h
- ├── platform.mk
- ├── pwm_lld.c
- ├── pwm_lld.h
- ├── rtc_lld.c
- ├── rtc_lld.h
- ├── sdc_lld.c
- ├── sdc_lld.h
- ├── serial_lld.c
- ├── serial_lld.h
- ├── spi_lld.c
- ├── spi_lld.h
- ├── st_lld.c
- ├── st_lld.h
- ├── uart_lld.c
- ├── uart_lld.h
- ├── usb_lld.c
- └── usb_lld.h
+++ /dev/null
-ifndef MAKEFILE_INCLUDED
- include ../../Makefile
-endif
\ No newline at end of file
+++ /dev/null
-#define KIIBOHD_BOOTLOADER
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 1000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 20
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
+++ /dev/null
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define PREVENT_STUCK_MODIFIERS
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6464
-#define DEVICE_VER 0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/* at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER "TMK"
-#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00'
-#define PRODUCT "Infinity keyboard/TMK"
-#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00'
-
-/* key matrix size */
-#define MATRIX_ROWS 9
-#define MATRIX_COLS 7
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Keymap for Infinity prototype */
-//#define INFINITY_PROTOTYPE
-
-/* Keymap for Infinity 1.1a (first revision with LED support) */
-//#define INFINITY_LED
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB TRUE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+++ /dev/null
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "infinity_chibios.h"
+++ /dev/null
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include "quantum.h"
-
-#ifdef INFINITY_PROTOTYPE
-
-/* Infinity prototype */
-#define KEYMAP( \
- K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
- K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
- K13, K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, \
- K54, K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, \
- K06, K16, K26, K36, K46, K56, K66, K76 \
-) { \
- { K00, K01, K02, K03, K04, K05, K06 }, \
- { K10, K11, K12, K13, K14, K15, K16 }, \
- { K20, K21, K22, K23, K24, K25, K26 }, \
- { K30, K31, K32, K33, K34, K35, K36 }, \
- { K40, K41, K42, K43, K44, K45, K46 }, \
- { K50, K51, K52, K53, K54, K55, K56 }, \
- { K60, K61, K62, K63, K64, K65, K66 }, \
- { K70, K71, K72, K73, K74, K75, K76 }, \
- { K80, K81, K82, K83, K84, K85, K86 } \
-}
-
-#else
-
-/* Infinity production */
-#define KEYMAP( \
- K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
- K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
- K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
- K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \
- K16, K26, K36, K46, K56, K66, K76, K86 \
-) { \
- { K00, K01, K02, K03, K04, K05, K06 }, \
- { K10, K11, K12, K13, K14, K15, K16 }, \
- { K20, K21, K22, K23, K24, K25, K26 }, \
- { K30, K31, K32, K33, K34, K35, K36 }, \
- { K40, K41, K42, K43, K44, K45, K46 }, \
- { K50, K51, K52, K53, K54, K55, K56 }, \
- { K60, K61, K62, K63, K64, K65, K66 }, \
- { K70, K71, K72, K73, K74, K75, K76 }, \
- { K80, K81, K82, K83, K84, K85, K86 } \
-}
-
-#endif
-
-#endif
+++ /dev/null
-#include "infinity_chibios.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------.
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0|
- * |-----------------------------------------------------------'
- * | |Gui|Alt | Space |Alt |Gui| | |
- * `-----------------------------------------------------------'
- */
- [0] = KEYMAP(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
- KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
- KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,MO(1), \
- KC_NO, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_NO, KC_NO),
-
- /* Layer 1: HHKB mode (HHKB Fn)
- * ,-----------------------------------------------------------.
- * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
- * |-----------------------------------------------------------|
- * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
- * |-----------------------------------------------------------|
- * | | | | | | | +| -|End|PgD|Dow| | |
- * `-----------------------------------------------------------'
- * | |Gui|Alt | Space |Alt |Gui| | |
- * `-----------------------------------------------------------'
- */
- [1] = KEYMAP(
- KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, \
- KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-};
-
-const uint16_t fn_actions[] = {
-
-};
-
+++ /dev/null
-#include "infinity_chibios.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------.
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bksp|
- * |-----------------------------------------------------------|
- * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2|
- * |-----------------------------------------------------------'
- * |Fn2 |Gui |Alt | Space |RAlt|Prv|PlPs|Next|
- * `-----------------------------------------------------------'
- */
- [0] = KEYMAP(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, LT(5, KC_ENT), \
- KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, MO(4), \
- MO(4), KC_LGUI, KC_LALT, LT(3, KC_SPC), KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
-
- /* Layer 1: "Toggle" off SpaceFn for League of Legends
- */
- [1] = KEYMAP(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(4), \
- MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT),
-
- /* Layer 2: "Toggle" off SpaceFn for MapleRoyals
- */
- [2] = KEYMAP(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_LSFT, \
- MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
-
- /* Layer 3: FN layer 1
- */
- [3] = KEYMAP(
- KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \
- KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4), KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP, KC_NO, KC_LPRN, KC_RPRN, KC_DEL, \
- MO(6), KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_END, KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, \
- LGUI(KC_SPC), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_CALC, KC_MENU, KC_TRNS, TG(4), \
- KC_TRNS, KC_TRNS, KC_TRNS, LT(3, KC_SPC), KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU),
-
- /* Layer 4: FN layer 2
- */
- [4] = KEYMAP(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PMNS, KC_PPLS, KC_PSLS, TG(2), \
- KC_CAPS, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_NO, KC_P7, KC_P8, KC_P9, KC_PAST, KC_BSPC, \
- KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P4, KC_P5, KC_P6, KC_PENT, \
- KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_RSFT, MO(4), \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_PDOT, KC_NO, TG(1)),
-
- /* Layer 5: FN layer 3
- */
- [5] = KEYMAP(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
- KC_TAB , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F13, KC_F14, KC_F15, KC_F16, KC_NO, KC_TRNS, \
- KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F17, KC_F18, KC_F19, KC_F20, LT(5, KC_ENT), \
- KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F21, KC_F22, KC_F23, KC_F24, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_NO, KC_NO, KC_NO),
-
- /* Layer 6: FN layer 4
- */
- [6] = KEYMAP(
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
- LCTL(LSFT(KC_TAB)), KC_NO, LGUI(KC_UP), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
- MO(6), LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
- KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
+++ /dev/null
-#include "infinity_chibios.h"
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------.
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0|
- * |-----------------------------------------------------------'
- * | |Gui|Alt | Space |Alt |Gui| | |
- * `-----------------------------------------------------------'
- */
- [0] = KEYMAP(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(3, KC_SCLN), KC_QUOT,MT(KC_RCTL, KC_ENT), \
- OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, LT(2, KC_SLSH), KC_RSFT,TG(1), \
- KC_NO, KC_LGUI,KC_LALT, LT(4, KC_SPC), MO(4), KC_RGUI,KC_NO, KC_NO),
-
- /* Layer 1: HHKB mode (HHKB Fn)
- * ,-----------------------------------------------------------.
- * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
- * |-----------------------------------------------------------|
- * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
- * |-----------------------------------------------------------|
- * | | | | | | | +| -|End|PgD|Dow| | |
- * `-----------------------------------------------------------'
- * | |Gui|Alt | Space |Alt |Gui| | |
- * `-----------------------------------------------------------'
- */
- [1] = KEYMAP(
- KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS,KC_BSPC, \
- KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, \
- KC_LSFT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS, \
- KC_TRNS,KC_LGUI,KC_LALT, KC_TRNS, KC_RALT,KC_RGUI,KC_TRNS,KC_TRNS),
-
- /* Layer 2: Vi mode[Slash]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
- * |-----------------------------------------------------------|
- * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | |
- * `-----------------------------------------------------------'
- * |Gui|Alt | Space |Alt |Gui|
- * `-------------------------------------------'
- */
- [2] = KEYMAP(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- KC_TAB, KC_HOME,KC_PGDN,KC_UP, KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO, KC_NO, KC_NO, KC_BSPC, \
- KC_LCTL,KC_NO, KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,KC_NO, KC_NO, KC_ENT, \
- KC_LSFT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME,KC_PGDN,KC_PGUP,KC_END, LT(2, KC_SLSH), KC_RSFT,KC_TRNS, \
- KC_TRNS,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_TRNS, KC_TRNS),
-
- /* Layer 3: Mouse mode(IJKL)[Semicolon]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
- * |-----------------------------------------------------------|
- * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Mb1 |Fn |Fn |
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
- */
- [3] = KEYMAP(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R, ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), \
- KC_LCTL, KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, LT(3, KC_SCLN), KC_NO, KC_ENT, \
- KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO, KC_RSFT, KC_TRNS, \
- KC_TRNS, KC_LGUI,KC_LALT, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
- /* Layer 4: Mouse mode(IJKL)[Space]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
- * |-----------------------------------------------------------|
- * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Mb1 |Fn |Fn |
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
- */
- [4] = KEYMAP(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R,KC_BTN4,KC_BTN5,LALT(KC_TAB), \
- KC_LCTL, KC_VOLD,KC_VOLU,KC_MUTE,KC_NO, KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, KC_BTN1,KC_NO, KC_ENT, \
- KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT),ALT_T(KC_RGHT),KC_NO, KC_RSFT,KC_TRNS, \
- KC_TRNS, KC_LGUI,KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS),
-
-};
-
-/*
- * Fn action definition
- */
-const uint16_t fn_actions[] = {
-
-};
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-
-#include "led.h"
-
-
-void led_set(uint8_t usb_led) {
-}
+++ /dev/null
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include "hal.h"
-#include "timer.h"
-#include "wait.h"
-#include "print.h"
-#include "matrix.h"
-
-
-/*
- * Infinity Pinusage:
- * Column pins are input with internal pull-down. Row pins are output and strobe with high.
- * Key is high or 1 when it turns on.
- * INFINITY PRODUCTION (NO LED)
- * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
- * row: { PTB0, PTB1, PTB2, PTB3, PTB16, PTB17, PTC4, PTC5, PTD0 }
- * INFINITY PRODUCTION (WITH LED)
- * col: { PTD1, PTD2, PTD3, PTD4, PTD5, PTD6, PTD7 }
- * row: { PTC0, PTC1, PTC2, PTC3, PTC4, PTC5, PTC6, PTC7, PTD0 }
- */
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-
-void matrix_init(void)
-{
- /* Column(sense) */
- palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 2, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 3, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN);
-
-#ifdef INFINITY_LED
- /* Row(strobe) */
- palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 1, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 2, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 6, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 7, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL);
-#else
- /* Row(strobe) */
- palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 17, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 4, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 5, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL);
-#endif
- memset(matrix, 0, MATRIX_ROWS);
- memset(matrix_debouncing, 0, MATRIX_ROWS);
-}
-
-uint8_t matrix_scan(void)
-{
- for (int row = 0; row < MATRIX_ROWS; row++) {
- matrix_row_t data = 0;
- #ifdef INFINITY_LED
- // strobe row
- switch (row) {
- case 0: palSetPad(GPIOC, 0); break;
- case 1: palSetPad(GPIOC, 1); break;
- case 2: palSetPad(GPIOC, 2); break;
- case 3: palSetPad(GPIOC, 3); break;
- case 4: palSetPad(GPIOC, 4); break;
- case 5: palSetPad(GPIOC, 5); break;
- case 6: palSetPad(GPIOC, 6); break;
- case 7: palSetPad(GPIOC, 7); break;
- case 8: palSetPad(GPIOD, 0); break;
- }
- #else
- // strobe row
- switch (row) {
- case 0: palSetPad(GPIOB, 0); break;
- case 1: palSetPad(GPIOB, 1); break;
- case 2: palSetPad(GPIOB, 2); break;
- case 3: palSetPad(GPIOB, 3); break;
- case 4: palSetPad(GPIOB, 16); break;
- case 5: palSetPad(GPIOB, 17); break;
- case 6: palSetPad(GPIOC, 4); break;
- case 7: palSetPad(GPIOC, 5); break;
- case 8: palSetPad(GPIOD, 0); break;
- }
- #endif
-
- wait_us(1); // need wait to settle pin state
-
- // read col data
- data = (palReadPort(GPIOD)>>1);
- #ifdef INFINITY_LED
- // un-strobe row
- switch (row) {
- case 0: palClearPad(GPIOC, 0); break;
- case 1: palClearPad(GPIOC, 1); break;
- case 2: palClearPad(GPIOC, 2); break;
- case 3: palClearPad(GPIOC, 3); break;
- case 4: palClearPad(GPIOC, 4); break;
- case 5: palClearPad(GPIOC, 5); break;
- case 6: palClearPad(GPIOC, 6); break;
- case 7: palClearPad(GPIOC, 7); break;
- case 8: palClearPad(GPIOD, 0); break;
- }
- #else
- // un-strobe row
- switch (row) {
- case 0: palClearPad(GPIOB, 0); break;
- case 1: palClearPad(GPIOB, 1); break;
- case 2: palClearPad(GPIOB, 2); break;
- case 3: palClearPad(GPIOB, 3); break;
- case 4: palClearPad(GPIOB, 16); break;
- case 5: palClearPad(GPIOB, 17); break;
- case 6: palClearPad(GPIOC, 4); break;
- case 7: palClearPad(GPIOC, 5); break;
- case 8: palClearPad(GPIOD, 0); break;
- }
- #endif
-
- if (matrix_debouncing[row] != data) {
- matrix_debouncing[row] = data;
- debouncing = true;
- debouncing_time = timer_read();
- }
- }
-
- if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- matrix[row] = matrix_debouncing[row];
- }
- debouncing = false;
- }
- return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- xprintf("\nr/c 01234567\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- xprintf("%02X: ");
- matrix_row_t data = matrix_get_row(row);
- for (int col = 0; col < MATRIX_COLS; col++) {
- if (data & (1<<col))
- xprintf("1");
- else
- xprintf("0");
- }
- xprintf("\n");
- }
-}
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define K20x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-
-/* Select the MCU clocking mode below by enabling the appropriate block. */
-
-#define KINETIS_NO_INIT FALSE
-
-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1 1
-#define KINETIS_CLKDIV1_OUTDIV2 1
-#define KINETIS_CLKDIV1_OUTDIV4 2
-#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
-#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0 TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0 TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY 2
-
-#endif /* _MCUCONF_H_ */
+++ /dev/null
-# project specific files
-SRC = matrix.c \
- led.c
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-# KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-# - MKL26Z64 for Teensy LC
-# - MK20DX128 for Teensy 3.0
-# - MK20DX256 for Teensy 3.1 and 3.2
-# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX128BLDR4
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-# - kl2x for Teensy LC
-# - k20x5 for Teensy 3.0 and Infinity KB
-# - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-# - BOARD =
-# - PJRC_TEENSY_LC for Teensy LC
-# - PJRC_TEENSY_3 for Teensy 3.0
-# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-# - MCHCK_K20 for Infinity KB
-BOARD = MCHCK_K20
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes # Mouse keys
-EXTRAKEY_ENABLE ?= yes # Audio control and System control
-CONSOLE_ENABLE ?= yes # Console for debug
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
projects / qmk_firmware.git / commitdiff