#include "led.h"
-void led_init_ports() {
+void led_init_ports(void) {
// * Set our LED pins as output
DDRB |= (1<<2);
}
#include "matrix.h"
#include "keymap.h"
#include <stddef.h>
-
+#include "action_util.h"
/* Clueboard matrix layout
* ,-----------------------------------------------------------.
The DIM_CURVE is used only on brightness/value and on saturation (inverted).
This looks the most natural.
*/
- uint8_t r, g, b;
+ uint8_t r = 0, g = 0, b = 0;
val = pgm_read_byte(&DIM_CURVE[val]);
sat = 255 - pgm_read_byte(&DIM_CURVE[255 - sat]);
}
void rgblight_increase(void) {
- uint8_t mode;
+ uint8_t mode = 0;
if (rgblight_config.mode < RGBLIGHT_MODES) {
mode = rgblight_config.mode + 1;
}
}
void rgblight_decrease(void) {
- uint8_t mode;
+ uint8_t mode = 0;
if (rgblight_config.mode > 1) { //mode will never < 1, if mode is less than 1, eeprom need to be initialized.
mode = rgblight_config.mode-1;
}
}
void rgblight_step(void) {
- uint8_t mode;
+ uint8_t mode = 0;
mode = rgblight_config.mode + 1;
if (mode > RGBLIGHT_MODES) {
mode = 1;
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
-#define EECONFIG_RGBLIGHT (uint8_t *)7
uint32_t eeconfig_read_rgblight(void);
void eeconfig_update_rgblight(uint32_t val);
void eeconfig_update_rgblight_default(void);
eeprom_update_byte(EECONFIG_BACKLIGHT, 0);
#endif
#ifdef AUDIO_ENABLE
- eeprom_update_byte(EECONFIG_AUDIO, 0xFF); // On by default
+ eeprom_update_byte(EECONFIG_AUDIO, 0xFF); // On by default
+#endif
+#ifdef RGBLIGHT_ENABLE
+ eeprom_update_dword(EECONFIG_RGBLIGHT, 0);
#endif
}
#define EECONFIG_MOUSEKEY_ACCEL (uint8_t *)5
#define EECONFIG_BACKLIGHT (uint8_t *)6
#define EECONFIG_AUDIO (uint8_t *)7
+#define EECONFIG_RGBLIGHT (uint32_t *)8
/* debug bit */