--- /dev/null
+#include QMK_KEYBOARD_H
+ #include "action_layer.h"
+
+
+extern keymap_config_t keymap_config;
+
+#define EXCEL_HOME LALT(KC_H)
+#define EXCEL_COL LCTL(KC_SPC)
+#define EXCEL_ROW LSFT(KC_SPC)
+#define DESK_LEFT LCTL(LGUI(KC_LEFT))
+#define WIN_LEFT LSFT(KC_TAB)
+#define WIN_CLOSE LALT(KC_F4)
+#define WIN_RIGHT KC_TAB
+#define DESK_RIGHT LCTL(LGUI(KC_RGHT))
+#define DOCS LGUI(KC_E)
+#define SNAP_RIGHT LGUI(KC_RGHT)
+#define SNAP_UP LGUI(KC_UP)
+#define SNAP_LEFT LGUI(KC_LEFT)
+#define SNAP_DOWN LGUI(KC_DOWN)
+#define COPY LCTL(KC_C)
+#define PASTE LCTL(KC_V)
+#define CUT LCTL(KC_X)
+#define UNDO LCTL(KC_Z)
+#define FIND LCTL(KC_F)
+
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+
+ LAYOUT_planck_grid(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, SFT_T(KC_ENT),
+ MO(1), KC_LCTL, KC_LALT, KC_LGUI, MO(2), LT(5,KC_ENT), LT(4,KC_SPC), MO(3), KC_SLSH, KC_LEFT, KC_DOWN, CTL_T(KC_RGHT)),
+
+ LAYOUT_planck_grid(
+ KC_ESC, KC_NLCK, LCTL(KC_SPC), KC_UP, LSFT(KC_SPC), KC_DLR, KC_EQL, KC_P7, KC_P8, KC_P9, KC_PPLS, LCTL(KC_BSPC),
+ KC_TAB, FIND, KC_LEFT, KC_DOWN, KC_RGHT, KC_PERC, KC_CIRC, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_BSLS,
+ KC_LSFT, UNDO, CUT, COPY, PASTE, EXCEL_HOME, KC_PSCR, KC_P1, KC_P2, KC_P3, KC_PSLS, KC_LSFT,
+ KC_TRNS, KC_LCTL, KC_LALT, KC_LGUI, TO(1), KC_ENT, KC_SPC, KC_PENT, KC_P0, KC_PDOT, KC_PAST, KC_LCTL),
+
+ LAYOUT_planck_grid(
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+ KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LT, KC_GT, KC_LPRN,
+ KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_MPLY, KC_MNXT, KC_PGUP, SFT_T(KC_VOLU),
+ TO(0), KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, KC_ENT, KC_SPC, MO(3), KC_PSCR, KC_MPRV, KC_PGDOWN, CTL_T(KC_VOLD)),
+
+ LAYOUT_planck_grid(
+ KC_TILD, DESK_LEFT, WIN_LEFT, KC_F4, WIN_RIGHT, DESK_RIGHT, DOCS, SNAP_LEFT, SNAP_UP, SNAP_RIGHT, SNAP_DOWN, KC_DEL,
+ KC_CAPS, KC_QUOT, KC_LBRC, KC_LCBR, KC_LPRN, KC_BSLS, KC_SLSH, KC_RPRN, KC_RCBR, KC_RBRC, KC_DQUO, KC_QUOT,
+ KC_PWR, KC_SLEP, KC_WAKE, KC_HOME, BL_BRTG, BL_STEP, KC_TRNS, KC_CALC, KC_LT, KC_GT, KC_COLON, KC_LSFT,
+ TO(0), KC_LCTL, KC_LALT, KC_LGUI, KC_LALT, KC_LCTL, KC_TRNS, KC_TRNS, AU_TOG, MU_TOG, MU_MOD, LCTL(KC_RGHT)),
+
+ LAYOUT_planck_grid(
+ TO(0), KC_LSCR, WIN_LEFT, KC_MS_WH_UP, WIN_RIGHT, KC_TRNS, KC_TRNS, KC_MS_BTN1, KC_MS_U, KC_MS_BTN2, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_INS, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS,
+ RESET, KC_APP, KC_MS_ACCEL0, KC_MS_ACCEL0, KC_MS_ACCEL0, KC_TRNS, KC_TRNS, TO(0), TO(1), TO(2), TO(3), TO(4),
+ TO(0), KC_MENU, KC_TRNS, KC_TRNS, KC_LALT, KC_LCTL, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RCTL),
+
+ LAYOUT_planck_grid(
+ KC_BSPC, KC_P, KC_O, KC_I, KC_U, KC_Y, KC_T, KC_R, KC_E, KC_W, KC_Q, KC_BSPC,
+ KC_TAB, KC_SCLN, KC_L, KC_K, KC_J, KC_H, KC_G, KC_F, KC_D, KC_S, KC_A, KC_QUOT,
+ KC_LSFT, KC_ENT, KC_DOT, KC_COMM, KC_M, KC_N, KC_B, KC_V, KC_C, KC_X, KC_Z, SFT_T(KC_ENT),
+ TO(0), KC_LCTL, KC_LALT, KC_LGUI, MO(2), KC_TRNS, KC_TRNS, MO(3), KC_SLSH, KC_LEFT, KC_DOWN, LCTL(KC_RGHT)),
+
+
+
+};
+
+
+#ifdef AUDIO_ENABLE
+
+void matrix_init_user(void)
+{
+ set_voice(default_voice);
+ startup_user();
+ println("Matrix Init");
+}
+
+void led_set_user(uint8_t usb_led)
+{
+ static uint8_t old_usb_led = 0;
+
+ _delay_ms(10); // gets rid of tick
+
+ if (!is_playing_notes())
+ {
+ if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK)))
+ {
+ // If CAPS LK LED is turning on...
+ PLAY_SONG(tone_caps_on);
+ }
+ else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK)))
+ {
+ // If CAPS LK LED is turning off...
+ PLAY_SONG(tone_caps_off);
+ }
+ else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK)))
+ {
+ // If NUM LK LED is turning on...
+ PLAY_SONG(tone_numlk_on);
+ }
+ else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK)))
+ {
+ // If NUM LED is turning off...
+ PLAY_SONG(tone_numlk_off);
+ }
+ else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
+ {
+ // If SCROLL LK LED is turning on...
+ PLAY_SONG(tone_scroll_on);
+ }
+ else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
+ {
+ // If SCROLL LED is turning off...
+ PLAY_SONG(tone_scroll_off);
+ }
+ }
+
+ old_usb_led = usb_led;
+}
+
+
+void startup_user()
+{
+ _delay_ms(30); // gets rid of tick
+ PLAY_SONG(tone_my_startup);
+}
+
+void shutdown_user()
+{
+ PLAY_SONG(tone_my_goodbye);
+ _delay_ms(3000);
+ stop_all_notes();
+}
+
+void audio_on_user(void)
+{
+ PLAY_SONG(tone_audio_on);
+}
+
+void music_on_user(void)
+{
+ PLAY_SONG(tone_music_on);
+}
+
+#endif /* AUDIO_ENABLE */
\ No newline at end of file
--- /dev/null
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+ifeq ($(strip $(KEYBOARD)), planck/rev3)
+ BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev4)
+ BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev5)
+ BOOTLOADER = qmk-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/light)
+ BOOTLOADER = qmk-dfu
+endif
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in[]
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = yes # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+LAYOUTS = ortho_4x12 planck_mit planck_grid
+LAYOUTS_HAS_RGB = no
+
+DEFAULT_FOLDER = planck/rev5
+
projects / qmk_firmware.git / commitdiff