--- /dev/null
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER blindassassin111
+#define PRODUCT Omnikey Blackheart PCB
+#define DESCRIPTION Teensy++ Board for Omnikey keyboards
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 23
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D4 }
+#define MATRIX_COL_PINS { C2, C3, C4, C7, C1, C0, E1, E0, D7, F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1, B2, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* force n-key rollover*/
+#define FORCE_NKRO
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "omnikey_blackheart.h"
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+#define XXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = KEYMAP(\
+ KC_F11 , KC_F12 , KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PSCR , KC_SLCK , KC_PAUS ,
+ KC_F1 , KC_F2 , KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , KC_INS , KC_HOME , KC_PGUP , KC_NLCK , KC_PSLS, KC_PAST, KC_PMNS,
+ KC_F3 , KC_F4 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , KC_DEL , KC_END , KC_PGDN , KC_P7 , KC_P8 , KC_P9 , KC_PPLS,
+ KC_F5 , KC_F6 , KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , XXXXXX , XXXXXX , XXXXXX , KC_P4 , KC_P5 , KC_P6 , KC_EQL,
+ KC_F7 , KC_F8 , KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , MO(1) , XXXXXX , KC_UP , XXXXXX , KC_P1 , KC_P2 , KC_P3 , KC_PENT,
+ KC_F9 , KC_F10 , KC_LCTL , KC_LGUI , KC_LALT , XXXXXX , KC_SPC , KC_RALT , KC_RGUI , KC_RCTL , XXXXXX , KC_LEFT , KC_DOWN , KC_RIGHT, KC_P0 , KC_PDOT
+ ),
+
+ [1] = KEYMAP(\
+ KC_F11 , KC_F12 , KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PSCR , KC_SLCK , KC_PAUS ,
+ KC_F1 , KC_F2 , RESET , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , KC_INS , KC_HOME , KC_PGUP , KC_NLCK , KC_PSLS, KC_PAST, KC_PMNS,
+ KC_F3 , KC_F4 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , KC_DEL , KC_END , KC_PGDN , KC_P7 , KC_P8 , KC_P9 , KC_PPLS,
+ KC_F5 , KC_F6 , KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , XXXXXX , XXXXXX , XXXXXX , KC_P4 , KC_P5 , KC_P6 , KC_EQL,
+ KC_F7 , KC_F8 , KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , ______ , XXXXXX , KC_UP , XXXXXX , KC_P1 , KC_P2 , KC_P3 , KC_PENT,
+ KC_F9 , KC_F10 , KC_LCTL , KC_LGUI , KC_LALT , XXXXXX , KC_SPC , KC_RALT , KC_RGUI , KC_RCTL , XXXXXX , KC_LEFT , KC_DOWN , KC_RIGHT, KC_P0 , KC_PDOT
+ ),
+};
+
+void led_set_kb(uint8_t usb_led) {
+ DDRB |= (1 << 4) | (1 << 5) | (1 << 6);
+
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+ PORTB |= (1 << 4);
+ } else {
+ PORTB &= ~(1 << 4);
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ PORTB |= (1 << 5);
+ } else {
+ PORTB &= ~(1 << 5);
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+ PORTB |= (1 << 6);
+ } else {
+ PORTB &= ~(1 << 6);
+ }
+}
\ No newline at end of file
--- /dev/null
+#include "omnikey_blackheart.h"
--- /dev/null
+#ifndef omnikey_blackheart
+#define omnikey_blackheart
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, K121, K122, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, K221, K222, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, K320, K321, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, K420, K421, \
+ K500, K501, K502, K503, K504, K505, K507, K512, K513, K514, K515, K516, K517, K518, K519, K520 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, K121, K122 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, K221, K222 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, K320, K321, KC_NO }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, K420, K421, KC_NO }, \
+ { K500, K501, K502, K503, K504, K505, KC_NO, K507, KC_NO, KC_NO, KC_NO, KC_NO, K512, K513, K514, K515, K516, K517, K518, K519, K520, KC_NO, KC_NO } \
+}
+
+#endif
\ No newline at end of file
--- /dev/null
+Omnikey Blackheart PCB
+===
+
+A replacement PCB for Omnikey keyboards. Supports 101, 102, Plus, Ultra T, Ultra, Prime and Stellar, as well as customs.
+
+Keyboard Maintainer: QMK Community and blindassassin111
+Hardware Supported: Omnikey blackheart PCB
+Hardware Availability: https://deskthority.net/group-buys-f50/omnikey-replacement-pcb-t18276.html
+
+Make example for this keyboard (after setting up your build environment):
+
+ make omnikey_blackheart:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- /dev/null
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no
\ No newline at end of file
projects / qmk_firmware.git / commitdiff