--- /dev/null
+/*
+Copyright 2019 Michael Campbell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCDCD
+#define PRODUCT_ID 0x6868
+#define DEVICE_VER 0x0001
+#define MANUFACTURER xiudi
+#define PRODUCT XD68
+#define DESCRIPTION XD68 65pc keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN F5
+#define BACKLIGHT_LEVELS 6
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+// ws2812 options
+#define RGB_DI_PIN F6 // pin the DI on the ws2812 is hooked-up to
+#define RGBLIGHT_ANIMATIONS // run RGB animations
+#define RGBLED_NUM 12 // number of LEDs
+#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
--- /dev/null
+
+#pragma once
+
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
\ No newline at end of file
--- /dev/null
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home|
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |PgUp|
+ * |----------------------------------------------------------------|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgDn|
+ * |----------------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|End |
+ * |----------------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space |App|Ctrl|FN |Lef|Dow|Rig |
+ * `----------------------------------------------------------------'
+ */
+[_BL] = LAYOUT_65_ansi(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_APP, KC_RCTRL, MO(_FL), KC_LEFT,KC_DOWN,KC_RGHT
+ ),
+
+ /* Keymap _FL: Function Layer
+ * ,----------------------------------------------------------------.
+ * |~ `| F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins |
+ * |----------------------------------------------------------------|
+ * |RESET| |Up | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | |<- |Dn | ->| | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * |HUI |SAI|VAI|RGBMOD|BL-|BL |BL+| | | | |Play |V+ |Mut |
+ * |----------------------------------------------------------------|
+ * |HUD |SAD |VAD | RGB_Tog | | | | <M|V- |M> |
+ * `----------------------------------------------------------------'
+ */
+[_FL] = LAYOUT_65_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS,
+ RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE,
+ RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, _______, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT
+),
+};
--- /dev/null
+# XD68 layout for Default ANSI
+
+```
+make xd68:default
+```
--- /dev/null
+#pragma once
+
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
\ No newline at end of file
--- /dev/null
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home|
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |PgUp|
+ * |------------------------------------------------------- -----|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #|Entr|PgDn|
+ * |----------------------------------------------------------------|
+ * |Shift| \ | Z| X| C| V| B| N| M| ,| .| /|Rshift|Up|End |
+ * |----------------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space |App|Ctrl |Fn|Lef|Dow|Rig |
+ * `----------------------------------------------------------------'
+ */
+ [_BL] = LAYOUT_65_iso(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_APP, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ /* Keymap _FL1: Function Layer 1
+ * ,----------------------------------------------------------------.
+ * |~ `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Delete| Ins|
+ * |----------------------------------------------------------------|
+ * |RESET| | ↑ | | | | | | | | | | | | |
+ * |------------------------------------------------------- -----|
+ * | | ← | ↓ | → | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * |HUI |SAI|VAI |RGBMOD| L+|LED| L-| | | | | |Play|V+|Mut|
+ * |----------------------------------------------------------------|
+ * |HUD |SAD |VAD | RGB_Tog | | | | <M | V-| M> |
+ * `----------------------------------------------------------------'
+ */
+ [_FL] = LAYOUT_65_iso(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS,
+ RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE,
+ RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, _______, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT
+ )
+};
--- /dev/null
+# XD68 layout for Default ISO
+
+```
+make xd68:default_iso
+```
--- /dev/null
+# XD68
+
+
+
+65% board with USB-C, RGB underglow and backlight. Powered by ATM32U4.
+
+
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: XD68
+* Hardware Availability: [KPRepublic on AliExpress](http://kprepublic.com/products/xiudi-xd68-pcb-65-custom-mechanical-keyboard-support-tkg-tools-underglow-rgb-pcb-programmed-kle-lots-of-layouts)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make xd68:default
+ make xd68:default_iso # default ISO UK layout
+
+## Layouts
+
+### ANSI
+
+```
+,----------------------------------------------------------------.
+|Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home|
+|----------------------------------------------------------------|
+|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |PgUp|
+|----------------------------------------------------------------|
+|CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgDn|
+|----------------------------------------------------------------|
+|Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|End |
+|----------------------------------------------------------------|
+|Ctrl|Win |Alt | Space |App|Ctrl|FN |Lef|Dow|Rig |
+`----------------------------------------------------------------'
+```
+
+### ISO-UK
+
+```
+,----------------------------------------------------------------.
+|Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home|
+|----------------------------------------------------------------|
+|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |PgUp|
+|------------------------------------------------------- -----|
+|CAPS | A| S| D| F| G| H| J| K| L| ;| '| #|Entr|PgDn|
+|----------------------------------------------------------------|
+|Shift| \ | Z| X| C| V| B| N| M| ,| .| /|Rshift|Up|End |
+|----------------------------------------------------------------|
+|Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig |
+`----------------------------------------------------------------'
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+# QMK Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI support
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+LAYOUTS = 65_ansi 65_iso
\ No newline at end of file
--- /dev/null
+#include "xd68.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+}
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ setPinOutput(B2);
+ writePinHigh(B2);
+}
+
+bool led_update_kb(led_t led_state) {
+ if(led_update_user(led_state)) {
+ writePin(B2, !led_state.caps_lock);
+ }
+ return true;
+}
+
--- /dev/null
+
+#pragma once
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* XD68 ANSI layout
+ * ,----------------------------------------------------------------.
+ * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | 0e |
+ * |----------------------------------------------------------------|
+ * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | 1e |
+ * |----------------------------------------------------------------|
+ * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | 2e |
+ * |----------------------------------------------------------------|
+ * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d| 3e |
+ * |----------------------------------------------------------------|
+ * | 40 | 41 | 42 | 45 | 48| 4a| 4b| 4c| 4d| 4e |
+ * `----------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_65_ansi( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k45, k48, k4a, k4b, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e}, \
+ {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
+ {k40, k41, k42, XXX, XXX, k45, XXX, XXX, k4b, XXX, k48, k4a, k4c, k4d, k4e} \
+}
+
+/* XD68 ISO layout
+ * ,----------------------------------------------------------------.
+ * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | 0e |
+ * |----------------------------------------------------------------|
+ * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| | 1e |
+ * |------------------------------------------------------. -----|
+ * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c| 2d| 2e |
+ * |----------------------------------------------------------------|
+ * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d| 3e |
+ * |----------------------------------------------------------------|
+ * | 40 | 41 | 42 | 45 | 48| 4a| 4b| 4c| 4d| 4e |
+ * `----------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_65_iso( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k45, k48, k4a, k4b, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
+ {k40, k41, k42, XXX, XXX, k45, XXX, XXX, k4b, XXX, k48, k4a, k4c, k4d, k4e} \
+}
projects / qmk_firmware.git / commitdiff