Committed initial version of the knops configurator.

diff --git a/keyboards/knops/mini/keymaps/knops/config.h b/keyboards/knops/mini/keymaps/knops/config.h
new file mode 100644 (file)
index 0000000..999d887
--- /dev/null
+++ b/keyboards/knops/mini/keymaps/knops/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2017 Pawnerd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

diff --git a/keyboards/knops/mini/keymaps/knops/keymap.c b/keyboards/knops/mini/keymaps/knops/keymap.c
new file mode 100644 (file)
index 0000000..4e50c29
--- /dev/null
+++ b/keyboards/knops/mini/keymaps/knops/keymap.c
@@ -0,0 +1,127 @@
+#include "mini.h"
+
+/*KNOPS_MISC*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+       /*KNOPS_KEYMAP*/
+
+};
+
+void set_led_state(int ledId, bool state) {
+       if(state) {
+               switch(ledId) {
+                       /* LED 0 to 5 are the leds of each keyswitch. From left to right, top to bottom. These are equal to the numbers in the legends of the default keycaps. */
+                       case 0:
+                               PORTD |= (1<<7);
+                               break;
+                       case 1:
+                               PORTC |= (1<<6);
+                               break;
+                       case 2:
+                               PORTD |= (1<<4);
+                               break;
+                       case 3:
+                               PORTE |= (1<<6);
+                               break;
+                       case 4:
+                               PORTB |= (1<<4);
+                               break;
+                       case 5:
+                               PORTD |= (1<<6);
+                               break;
+                               /* LED 6 to 8 are the three layer leds in front of the device from left to right. */
+                       case 6:
+                               PORTD &= ~(1<<5);
+                               break;
+                       case 7:
+                               PORTB |= (1<<6);
+                               break;
+                       case 8:
+                               PORTB &= ~(1<<0);
+                               break;
+               }
+       } else {
+               switch(ledId) {
+                       case 0:
+                               PORTD &= ~(1<<7);
+                               break;
+                       case 1:
+                               PORTC &= ~(1<<6);
+                               break;
+                       case 2:
+                               PORTD &= ~(1<<4);
+                               break;
+                       case 3:
+                               PORTE &= ~(1<<6);
+                               break;
+                       case 4:
+                               PORTB &= ~(1<<4);
+                               break;
+                       case 5:
+                               PORTD &= ~(1<<6);
+                               break;
+                       case 6:
+                               PORTD |= (1<<5);
+                               break;
+                       case 7:
+                               PORTB &= ~(1<<6);
+                               break;
+                       case 8:
+                               PORTB |= (1<<0);
+                               break;
+               }
+       }
+}
+
+void led_init_ports() {
+       DDRD |= (1<<7);
+       DDRC |= (1<<6);
+       DDRD |= (1<<4);
+       DDRE |= (1<<6);
+       DDRB |= (1<<4);
+       DDRD |= (1<<6);
+
+       DDRD |= (1<<5);
+       DDRB |= (1<<6);
+       DDRB |= (1<<0);
+}
+
+void matrix_init_user(void) {
+       led_init_ports();
+       
+       led_set_layer(0);
+       
+       /*KNOPS_INIT*/
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+       //keyevent_t event = record->event;
+
+       /*KNOPS_MACRO*/
+}
+
+
+void matrix_scan_user(void) {
+       /*KNOPS_SCAN*/
+}
+
+void led_set_user(uint8_t usb_led) {
+
+       /*KNOPS_FUNCTIONALLED_STATES*/
+
+}
+
+void led_set_layer(int layer) {
+
+       /*KNOPS_SIMPLELED_STATES*/
+
+}
+
+bool process_record_user (uint16_t keycode, keyrecord_t *record) {
+  
+       /*KNOPS_PROCESS_STATE*/
+  
+}
+
+

diff --git a/keyboards/knops/mini/keymaps/knops/readme.md b/keyboards/knops/mini/keymaps/knops/readme.md
new file mode 100644 (file)
index 0000000..5869697
--- /dev/null
+++ b/keyboards/knops/mini/keymaps/knops/readme.md
@@ -0,0 +1,11 @@
+# Default Knops Mini Layout
+
+![Knops logo](http://knops.io/img/Knops_logo.jpg)
+
+![Knops Mini Layout Image](https://i.imgur.com/WQBQctm.png)
+
+This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot:
+
+![Knops Mini Layout Image](https://i.imgur.com/afH1NOt.png)
+
+As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file