--- /dev/null
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif
--- /dev/null
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER GON
+#define PRODUCT NerD
+#define DESCRIPTION QMK port for the GON Nerd PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 9
+
+/* backlight */
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 3
+
+/* matrix pins */
+#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 }
+#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
--- /dev/null
+#include "gonnerd.h"
--- /dev/null
+#ifndef GONNERD_H
+#define GONNERD_H
+
+#include "quantum.h"
+
+#define KEYMAP_TKL( \
+ K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
+ K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
+ K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \
+ K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \
+) \
+{ \
+ { K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \
+ { K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \
+ { K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \
+ { K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \
+ { K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \
+ { K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \
+ { K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \
+ { K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \
+ { K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \
+ { K09, K19, K29, K39, K49, K59, K69, K79, K89 } \
+}
+
+#define KEYMAP_60( \
+ K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
+ K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \
+ K06, K05, K78, K70, K72, K73, K74, K75 \
+) KEYMAP_TKL( \
+ K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, KC_NO, KC_NO, KC_NO, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, KC_NO, KC_NO, KC_NO, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
+ K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, KC_NO, \
+ K06, K05, K78, K70, K72, K73, K74, K75, KC_NO, KC_NO, KC_NO \
+)
+
+#endif
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#include "gonnerd.h"
+
+// Keymap layers
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = KEYMAP_60( /* Base */
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\
+ KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \
+ KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#include "gonnerd.h"
+
+// Keymap layers
+#define BASE_LAYER 0
+#define FUNCTION_LAYER 1
+#define SYSTEM_LAYER 2
+
+// Key aliases
+#define __x__ KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | BSp |
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ * |-----------------------------------------------------------|
+ * |Funct | A| S| D| F| G| H| J| K| L| ;| '|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
+ * |-----------------------------------------------------------'
+ * | Ctl|Alt|Gui | Space |Gui |Alt| F2| Ctl |
+ * `-----------------------------------------------------------'
+ */
+ [BASE_LAYER] = KEYMAP_60(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \
+ KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \
+ ),
+
+ /* Layer 1: Function Layer
+ * ,-----------------------------------------------------------.
+ * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12| Del |
+ * |-----------------------------------------------------------|
+ * | |Prv|Ply|Nxt| | |Pg^|Hme|Up |End| |Br-|Br+| |
+ * |-----------------------------------------------------------|
+ * |Hold |Mte|Vl-|Vl+| | |Pgv|Lft|Dwn|Rgt| | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------'
+ * | | | | | | | | |
+ * `-----------------------------------------------------------'
+ */
+ [FUNCTION_LAYER] = KEYMAP_60(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
+ __x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \
+ KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \
+ KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \
+ ),
+
+ /* Layer 2: System Layer
+ * ,-----------------------------------------------------------.
+ * |Reset| | | | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------'
+ * | | | | | | | | |
+ * `-----------------------------------------------------------'
+ */
+ [SYSTEM_LAYER] = KEYMAP_60(
+ RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
+ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
+ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
+ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
+ __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \
+ ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
--- /dev/null
+# Mauin's keymap for the GON NerD
+
+This layout is based on a Pok3r style layout with a standard base layer.
+
+Function layers provide access to navigation and media keys.
--- /dev/null
+GON NerD keyboard firmware
+======================
+
+## Changing Bootloader
+
+It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
+
+It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
+[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
+
+_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
+not work anymore. You will lose your warranty and official support from GON!_
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 8000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+ # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+ # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
* [Bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard.
* [Ergodox Infinity](/keyboards/ergodox) - Ergonomic Split Keyboard by Input Club.
* [GH60](/keyboards/gh60) — A 60% Geekhack community-driven project.
+* [GON NerD](/keyboards/gonnerd) — Korean custom 60% PCB
* [Happy Hacking Keyboard](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
* [Infinity 60%](/keyboards/infinity60) - — Compact community keyboard by Input Club.
* [JD45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe.
projects / qmk_firmware.git / commitdiff