+<<<<<<< HEAD
ifndef MAKEFILE_INCLUDED
+=======
+SRC += matrix.c \
+ i2c.c \
+ split_util.c \
+ serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no # MIDI controls
+AUDIO_ENABLE ?= yes # Audio output on port C6
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+USE_I2C ?= yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+SUBPROJECT_DEFAULT = rev2
+ifndef QUANTUM_DIR
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
include ../../Makefile
endif
\ No newline at end of file
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
+<<<<<<< HEAD
+=======
+<<<<<<< HEAD
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#ifdef SUBPROJECT_rev1
#include "rev1/config.h"
#endif
#include "rev2/config.h"
#endif
#endif
+<<<<<<< HEAD
+=======
+
+
+
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+<<<<<<< HEAD
/* Qwerty
* ,-----------------------------------------------------------------------------------.
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+=======
+[0] = KEYMAP( \
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
- KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+[3] = KEYMAP( \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+<<<<<<< HEAD
_______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+=======
+ _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
+[4] = KEYMAP( \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
+<<<<<<< HEAD
_______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
)
+=======
+ _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
};
#ifdef AUDIO_ENABLE
#include "lets_split.h"
+<<<<<<< HEAD
+=======
+
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER Wootpatoot
+<<<<<<< HEAD
#define PRODUCT Lets Split
+=======
+#define PRODUCT Lets Split v1
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define DESCRIPTION A split keyboard for the cheap makers
/* key matrix size */
// #define USE_I2C
+<<<<<<< HEAD
// Use serial if not using I2C
#ifndef USE_I2C
# define USE_SERIAL
#endif
+=======
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
// #define EE_HANDS
#define I2C_MASTER_LEFT
)
/* ws2812 RGB LED */
+<<<<<<< HEAD
#define RGB_DI_PIN D4
#define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs
+=======
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+#define ws2812_pin PD1
+#define RGBLED_NUM 28 // Number of LEDs
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
+<<<<<<< HEAD
#endif
+=======
+#endif
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
};
void shutdown_user(void) {
+<<<<<<< HEAD
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
#endif
+=======
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
}
#ifndef REV1_H
#define REV1_H
+<<<<<<< HEAD
#include "../lets_split.h"
//void promicro_bootloader_jmp(bool program);
+=======
+#include "quantum.h"
+
+void promicro_bootloader_jmp(bool program);
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
// #define USE_I2C
+<<<<<<< HEAD
// Use serial if not using I2C
#ifndef USE_I2C
# define USE_SERIAL
#endif
+=======
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
// #define EE_HANDS
#define I2C_MASTER_LEFT
)
/* ws2812 RGB LED */
+<<<<<<< HEAD
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
+=======
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+#define ws2812_pin PD1
+#define RGBLED_NUM 28 // Number of LEDs
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
+<<<<<<< HEAD
#endif
+=======
+#endif
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
};
void shutdown_user(void) {
+<<<<<<< HEAD
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
#endif
+=======
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
}
#ifndef REV2_H
#define REV2_H
+<<<<<<< HEAD
#include "../lets_split.h"
//void promicro_bootloader_jmp(bool program);
+=======
+#include "quantum.h"
+
+void promicro_bootloader_jmp(bool program);
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
+<<<<<<< HEAD
ifndef MAKEFILE_INCLUDED
include ../../Makefile
-endif
\ No newline at end of file
+endif
+=======
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+
+ifndef QUANTUM_DIR
+ include ../../Makefile
+endif
+
+
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
+<<<<<<< HEAD
#define MANUFACTURER You
#define PRODUCT maxipad
#define DESCRIPTION A custom keyboard
+=======
+#define MANUFACTURER Wootpatoot
+#define PRODUCT maxipad
+#define DESCRIPTION g8ming keeb
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
/* key matrix size */
#define MATRIX_ROWS 5
),
[1] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \
+<<<<<<< HEAD
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
+=======
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
),
## Quantum MK Firmware
+<<<<<<< HEAD
For the full Quantum feature list, see [the parent readme](/).
+=======
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
## Building
### Default
+<<<<<<< HEAD
To build with the default keymap, simply run `make default`.
+=======
+To build with the default keymap, simply run `make`.
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+<<<<<<< HEAD
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
```
```
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+=======
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
projects / qmk_firmware.git / commitdiff