define_pixels (block_rest_y, block_rest_x);
+
def block_rest =
draw_block ((0, 0), (block_rest_x, block_rest_y));
enddef;
fet_beginchar ("whole rest (outside staff)", "0o")
set_char_box (0, block_rest_x#,
block_rest_y#, ledgerlinethickness# / 2);
+
block_rest;
currentpicture := currentpicture shifted (0, -block_rest_y);
+
pickup pencircle scaled ledgerlinethickness;
y5 = y6 = 0;
fet_beginchar ("half rest (outside staff)", "1o");
set_char_box (0, block_rest_x#,
ledgerlinethickness# / 2, block_rest_y#);
+
block_rest;
+
pickup pencircle scaled ledgerlinethickness;
y5 = y6 = 0;
save before, after;
path before, after;
- before = z11{se} .. {se}z5l;
- after = z5r{nw} ..tension1.4.. z6l;
+ before = z11{se}
+ .. {se}z5l;
+ after = z5r{nw}
+ ..tension1.4.. z6l;
(u, v) = before intersectiontimes after;
- fill z1l{se} ..
- {se}z10 ..
- z3l ..
- subpath(0, u) of before ..
- subpath(v, infinity) of after ..tension1.4..
- {se}z7l ..
- z7r{nw} ..tension1.4..
- z6r ..tension1.4..
- {se}z5l ..
- z5r{nw} ..
- {nw}z12 ..
- z3r ..
- z13{nw} ..
- {nw}z1r .. cycle;
+ fill z1l{se}
+ .. {se}z10
+ .. z3l
+ .. subpath (0, u) of before
+ .. subpath (v, infinity) of after
+ ..tension1.4.. {se}z7l
+ .. z7r{nw}
+ ..tension1.4.. z6r
+ ..tension1.4.. {se}z5l
+ .. z5r{nw}
+ .. {nw}z12
+ .. z3r
+ .. z13{nw}
+ .. {nw}z1r
+ .. cycle;
penlabels (1, 2, 3, 4, 5, 6, 7);
penlabels (10, 11, 12, 13);
(pt, whatever) = pat intersectiontimes ((0, ycut) -- (w, ycut));
path res;
- res = point pt of pat {-direction pt of pat} ..tension 2..
- z4{left} ..tension 0.9..
- z7 ..
- z5{left} ..
- z8 ..
- z3{right} ..
- {curl 0.2}z6;
+ res = point pt of pat {-direction pt of pat}
+ ..tension 2.. z4{left}
+ ..tension 0.9.. z7
+ .. z5{left}
+ .. z8
+ .. z3{right}
+ .. {curl 0.2}z6;
labels (3, 4, 5, 6, 7, 8, 10);
res
z2 = z1 + whatever * dir (72);
z9 = z2 + 0.5 linethickness * dir (angle (z2 - z1) - 10);
- pat = z1l ---
- z2l ..
- z9 ..
- z2r ---
- z1r .. cycle;
+ pat = z1l
+ --- z2l
+ .. z9
+ .. z2r
+ --- z1r
+ .. cycle;
bulb = draw_rest_bulb (0.5 staff_space, y2r, pat, 1.0);
+% remove_overlap (pat, bulb) () R;
+% fill R1;
- fill simple_serif (z1l, z1r, 40) ---
- z2r ..
- z9 ..
- bulb ---
- z1l .. cycle;
+ fill simple_serif (z1l, z1r, 40)
+ --- z2r
+ .. z9
+ .. bulb
+ --- z1l
+ .. cycle;
penlabels (1, 2);
labels (9);
x2r = width;
z2 = z1 + whatever*dir(74);
z9 = z2 + 0.5 linethickness * dir (angle(z2 - z1)- 10);
- pat = z1l ---
- z2l ..
- z9 ..
- z2r ---
- z1r .. cycle;
+ pat = z1l
+ --- z2l
+ .. z9
+ .. z2r
+ --- z1r
+ .. cycle;
bulb_a = draw_rest_bulb (0.5 staff_space, y2r, pat, 0.98);
bulb_b = draw_rest_bulb (-0.5 staff_space,
(-0.5 + 0.2) * staff_space, pat, 1.02);
- fill simple_serif (z1l, z1r, 40) ---
- z2r ..
- z9 ..
- bulb_a ---
- bulb_b ---
- z1l .. cycle;
+ fill simple_serif (z1l, z1r, 40)
+ --- z2r
+ .. z9
+ .. bulb_a
+ --- bulb_b
+ --- z1l
+ .. cycle;
penlabels (1, 2);
labels (9);
x2r = width;
z2 = z1 + whatever * dir (76);
z9 = z2 + 0.5 linethickness * dir (angle (z2 - z1) - 10);
- pat = z1l ---
- z2l ..
- z9 ..
- z2r ---
- z1r .. cycle;
+ pat = z1l
+ --- z2l
+ .. z9
+ .. z2r
+ --- z1r
+ .. cycle;
bulb_a = draw_rest_bulb( 1.5 staff_space, y2r, pat, 0.96);
bulb_b = draw_rest_bulb( 0.5 staff_space,
(0.5 + 0.2) * staff_space, pat, 1.00);
bulb_c = draw_rest_bulb( -0.5 staff_space,
(-0.5 + 0.21) * staff_space, pat, 1.04);
- fill simple_serif (z1l, z1r, 40) ---
- z2r ..
- z9 ..
- bulb_a ---
- bulb_b ---
- bulb_c ---
- z1l .. cycle;
+ fill simple_serif (z1l, z1r, 40)
+ --- z2r
+ .. z9
+ .. bulb_a
+ --- bulb_b
+ --- bulb_c
+ --- z1l
+ .. cycle;
penlabels (1, 2);
labels (9);
x2r = width;
z2 = z1 + whatever * dir (78);
z9 = z2 + 0.5 linethickness * dir (angle (z2 - z1) - 10);
- pat = z1l ---
- z2l ..
- z9 ..
- z2r ---
- z1r .. cycle;
+ pat = z1l
+ --- z2l
+ .. z9
+ .. z2r
+ --- z1r
+ .. cycle;
bulb_a = draw_rest_bulb (1.5 staff_space, y2r, pat, 0.94);
bulb_b = draw_rest_bulb (0.5 staff_space,
(0.5 + 0.20) * staff_space, pat, 0.98);
bulb_d = draw_rest_bulb (-1.5 staff_space,
(-1.5 + 0.22) * staff_space, pat, 1.06);
- fill simple_serif (z1l, z1r, 40) ---
- z2r ..
- z9 ..
- bulb_a ---
- bulb_b ---
- bulb_c ---
- bulb_d ---
- z1l .. cycle;
-
+ fill simple_serif (z1l, z1r, 40)
+ --- z2r
+ .. z9
+ .. bulb_a
+ --- bulb_b
+ --- bulb_c
+ --- bulb_d
+ --- z1l
+ .. cycle;
penlabels (1, 2);
labels (9);
x2r = width;
z2 = z1 + whatever * dir (80);
z9 = z2 + 0.5 linethickness * dir (angle (z2 - z1)- 10);
- pat = z1l ---
- z2l ..
- z9 ..
- z2r ---
- z1r .. cycle;
+ pat = z1l
+ --- z2l
+ .. z9
+ .. z2r
+ --- z1r
+ .. cycle;
bulb_a = draw_rest_bulb (2.5 staff_space, y2r, pat, 0.92);
bulb_b = draw_rest_bulb (1.5 staff_space,
(1.5 + 0.20) * staff_space, pat, 0.96);
bulb_e = draw_rest_bulb (-1.5 staff_space,
(-1.5 + 0.23) * staff_space, pat, 1.08);
- fill simple_serif (z1l, z1r, 40) ---
- z2r ..
- z9 ..
- bulb_a ---
- bulb_b ---
- bulb_c ---
- bulb_d ---
- bulb_e ---
- z1l .. cycle;
+ fill simple_serif (z1l, z1r, 40)
+ --- z2r
+ .. z9
+ .. bulb_a
+ --- bulb_b
+ --- bulb_c
+ --- bulb_d
+ --- bulb_e
+ --- z1l
+ .. cycle;
penlabels (1, 2);
labels (9);
endgroup;
-fet_endgroup("rests")
+fet_endgroup ("rests")
-%
-% feta-toevallig.mf -- implement Accidentals
-%
+%
+% feta-toevallig.mf -- implement Accidentals
+%
% source file of the Feta (Font-En-Tja) music font
-%
+%
% (c) 1997--2004 Han-Wen Nienhuys <hanwen@cs.uu.nl>
-%
+%
%
%proofing := 2;
%\tracingequations:= tracingonline := 1;
-fet_begingroup("accidentals");
+fet_begingroup ("accidentals");
%
-% The beams of most sharps have horizontal endings (as if drawn with
-% a square pen). [Wanske] does not mention this, so we'll just ignore
-% this fact
+% The beams of most sharps have horizontal endings (as if drawn with
+% a square pen). [Wanske] does not mention this, so we'll just ignore
+% this fact.
%
def draw_meta_sharp (expr width) =
- save interbeam, interstem, beamheight, beamwidth,
- stemwidth, beamslope;
- save spanwidth, spanheight;
-
+ save interbeam, interstem;
+ save beamheight, beamwidth, beamslope;
+ save spanheight, spanwidth;
+ save stemwidth;
+
save center;
pair center;
interbeam := 1.05 staff_space;
beamheight := 0.3 staff_space + stafflinethickness;
beamwidth := width;
- stemwidth := 1.0 stafflinethickness + .05 staff_space;
+ stemwidth := stafflinethickness + .05 staff_space;
roundness := 2 blot_diameter;
center := (.5 w, 0);
-
+
roundness + 2 spanwidth = beamwidth;
roundness + 2 spanheight = beamheight;
z2 - z1 = (beamwidth - roundness, beamheight);
- z1 + z2 = 2*center;
- beamslope = (y2-y1)/(x2-x1);
+ z1 + z2 = 2 * center;
+ beamslope = (y2 - y1) / (x2 - x1);
pair hspan, vspan;
hspan = (spanwidth, beamslope * spanwidth);
vspan = (0, spanheight);
-
- path beam;
- beam := (hspan + vspan -- -hspan
- + vspan -- -hspan -vspan -- hspan - vspan -- cycle )
- shifted center;
pickup pencircle scaled roundness;
- filldraw (beam shifted (0,-interbeam/2));
+ path beam;
+ beam := (rt (hspan + vspan)
+ .. top (hspan + vspan)
+ --- top (-hspan + vspan)
+ .. lft (-hspan + vspan)
+ --- lft (-hspan - vspan)
+ .. bot (-hspan - vspan)
+ --- bot (hspan - vspan)
+ .. rt (hspan - vspan)
+ --- cycle) shifted center;
+ fill (beam shifted (0, -interbeam / 2));
pickup pencircle scaled stemwidth;
x3 = x4 = xpart center;
+enddef;
- enddef;
-
-fet_beginchar("Sharp" , "2");
- set_char_box(0, 1.1 staff_space#, 1.5 staff_space#,
- 1.5 staff_space#);
+fet_beginchar ("Sharp" , "2");
+ set_char_box (0, 1.1 staff_space#,
+ 1.5 staff_space#, 1.5 staff_space#);
draw_meta_sharp (w);
save stemx;
stemx := 7 / 32 * w;
- (bot y3) + - stemx * beamslope = -1.5 staff_space + ypart center;
- top y4 + stemx * beamslope = 1.5 staff_space + ypart center;
+ (bot y3) + -stemx * beamslope = -1.5 staff_space + ypart center;
+ (top y4) + stemx * beamslope = 1.5 staff_space + ypart center;
- labels(1,2,3,4);
+ labels (1, 2, 3, 4);
- draw_gridline (z3-(stemx,stemx* beamslope),z4-(stemx, stemx*beamslope), stemwidth);
- addto currentpicture also currentpicture rotated 180 shifted (w,0);
+ draw_gridline (z3 - (stemx, stemx * beamslope),
+ z4 - (stemx, stemx * beamslope),
+ stemwidth);
+ addto currentpicture also currentpicture rotated 180 shifted (w, 0);
+fet_endchar;
- fet_endchar;
-fet_beginchar("1/2 Sharp" , "1");
- set_char_box(0, 0.7 staff_space#, 1.5 staff_space#,
- 1.5 staff_space#);
+fet_beginchar ("1/2 Sharp" , "1");
+ set_char_box (0, 0.7 staff_space#,
+ 1.5 staff_space#, 1.5 staff_space#);
draw_meta_sharp (w);
stemx := 7 / 32 * w;
- (bot y3) + - stemx * beamslope = -1.5 staff_space + ypart center;
- top y4 + stemx * beamslope = 1.5 staff_space + ypart center;
+ (bot y3) + -stemx * beamslope = -1.5 staff_space + ypart center;
+ (top y4) + stemx * beamslope = 1.5 staff_space + ypart center;
- labels(1,2,3,4);
+ labels (1, 2, 3, 4);
draw_gridline (z3, z4, stemwidth);
- addto currentpicture also currentpicture rotated 180 shifted (w,0);
-
- fet_endchar;
+ addto currentpicture also currentpicture rotated 180 shifted (w, 0);
+fet_endchar;
-fet_beginchar("3/4 Sharp" , "3");
- set_char_box(0, 1.6 staff_space#, 1.5 staff_space#,
- 1.5 staff_space#);
+fet_beginchar ("3/4 Sharp", "3");
+ set_char_box (0, 1.6 staff_space#,
+ 1.5 staff_space#, 1.5 staff_space#);
draw_meta_sharp (w);
stemx := 9 / 32 * w;
- (bot y3) + - stemx * beamslope = -1.5 staff_space + ypart center;
- top y4 + stemx * beamslope = 1.5 staff_space + ypart center;
+ (bot y3) + -stemx * beamslope = -1.5 staff_space + ypart center;
+ (top y4) + stemx * beamslope = 1.5 staff_space + ypart center;
- labels(1,2,3,4);
+ labels (1, 2, 3, 4);
- draw_gridline (z3-(stemx,stemx* beamslope),z4-(stemx, stemx*beamslope), stemwidth);
+ draw_gridline (z3 - (stemx, stemx * beamslope),
+ z4 - (stemx, stemx * beamslope),
+ stemwidth);
draw_gridline (z3, z4, stemwidth);
addto currentpicture also currentpicture rotated 180 shifted (w,0);
+fet_endchar;
- fet_endchar;
%
-% The stems of the natural are brushed (at least, in Barenreiter SCS )
-%
+% The stems of the natural are brushed (at least, in Barenreiter SCS)
%
-fet_beginchar("Natural", "0")
+fet_beginchar ("Natural", "0")
save height, xcenter;
- save interbeam, interstem, beamheight, beamwidth,
- stemwidth;
- save top_stem_thick;
+ save interbeam, interstem;
+ save beamheight, beamwidth;
+ save stemwidth, top_stem_thick;
beamheight# = 0.35 staff_space# + .5 stafflinethickness#;
height# = 1.5 staff_space#;
- set_char_box(0, 2/3 staff_space#, height#, height#);
- define_pixels(height);
- define_blacker_pixels(beamheight);
+ set_char_box (0, 2/3 staff_space#, height#, height#);
- top_stem_thick = round (1 stafflinethickness + .09staff_space ) + 0.4;
- stemwidth = 0.08 staff_space + .5 stafflinethickness;
-
+ define_pixels (height);
+ define_blacker_pixels (beamheight);
- interstem + stemwidth = w;
+ top_stem_thick = round (stafflinethickness + .09 staff_space) + 0.4;
+ stemwidth = 0.08 staff_space + .5 stafflinethickness;
- z2 -z1 = (interstem, slope * interstem);
- xpart .5 [z2,z1] = xcenter ;
- xcenter = w/2;
+ interstem + stemwidth = w;
+ z2 - z1 = (interstem, slope * interstem);
+ xpart .5 [z2, z1] = xcenter;
+ xcenter = w / 2;
pickup penrazor scaled beamheight rotated 90;
- top y2 = staff_space - 3/2 stafflinethickness ;
+ top y2 = staff_space - 3/2 stafflinethickness;
slope = stafflinethickness / interstem;
-
- draw z1 .. z2;
- draw (xpart z1, -y2) .. (xpart z2, -y1);
+
+ draw z1
+ .. z2;
+ draw (xpart z1, -y2)
+ .. (xpart z2, -y1);
+
beamtop = top y2;
pickup pencircle scaled stemwidth;
x3 := round (xpart z1);
x4 := round (xpart z2);
- penpos3(top_stem_thick, 0);
- penpos5(top_stem_thick, 0);
- penpos4(stemwidth, 0);
- penpos6(stemwidth, 0);
-
+ penpos3 (top_stem_thick, 0);
+ penpos5 (top_stem_thick, 0);
+ penpos4 (stemwidth, 0);
+ penpos6 (stemwidth, 0);
+
y3 = height;
top y4 = beamtop;
bot y6 = -beamtop;
y5 = - height;
- fill simple_serif (z3l, z3r, -30) -- simple_serif(z6r, z6l, -90) -- cycle;
- fill simple_serif (z5l, z5r, 30) -- simple_serif(z4r, z4l, 90) -- cycle;
-
-
-
- penlabels(3,4,5,6);
-
- labels(1,2);
- fet_endchar;
+ fill simple_serif (z3l, z3r, -30)
+ -- z6r
+ .. bot z6
+ .. z6l
+ -- cycle;
+ fill simple_serif (z5l, z5r, 30)
+ -- z4r
+ .. top z4
+ .. z4l
+ -- cycle;
+
+ penlabels (3, 4, 5, 6);
+ labels (1, 2);
+fet_endchar;
%
% Dedicated to my mom. (3/10/97)
%
-% Mamma, ik hou van je; kom je alsjeblieft terug?
+% Mamma, ik hou van je; kom je alsjeblieft terug?
% -- HW
%
% TODO: remove crook_fatness
% TODO: document, simplify!
%
-def draw_meta_flat(expr xcenter, w, crook_fatness) =
+def draw_meta_flat (expr xcenter, w, crook_fatness) =
clearxy;
save crook_thinness;
save bottom_overshoot;
save top_stem_thick, bottom_stem_thick, hair, smaller_hole;
save top_crook_thinness;
- save zwiep;
+ save zwiep;
save center;
pair center;
save clearing;
+
center = (xcenter, 0);
% the shouldn't reach to the top staff line.
%% TODO: should take from height.
- clearing = 1.2 stafflinethickness;
+ clearing = 1.2 stafflinethickness;
%
-% TODO: parameterize this
+% TODO: parameterize this
%
if w >= 0.75 staff_space:
smaller_hole = 0.35 stafflinethickness;
smaller_hole = 0.0 stafflinethickness;
fi
crook_thinness = .7 stafflinethickness + .06 staff_space;
- top_crook_thinness = 1 stafflinethickness + .065 staff_space ;
+ top_crook_thinness = 1 stafflinethickness + .065 staff_space;
- % this is a somewhat heuristic. We should probably make it
+ % this is a somewhat heuristic. We should probably make it
% straight for low resolution (300 dpi and less).
- top_stem_thick = round (0.1 staff_space + 1.2 stafflinethickness) + 0.74;
+ top_stem_thick =
+ round (0.1 staff_space + 1.2 stafflinethickness) + 0.74;
bottom_overshoot = stafflinethickness;
- bottom_stem_thick = 0.06 staff_space + 0.6 stafflinethickness;
-
- z1 = (0, 2 staff_space) + center - (0, stafflinethickness/2
- + clearing);
- z2 = (0, - 1/2 staff_space - stafflinethickness/2 )+ center;
+ bottom_stem_thick = 0.06 staff_space + 0.6 stafflinethickness;
- penpos1(top_stem_thick, 0);
- penpos2(bottom_stem_thick, 0);
-
- fill simple_serif(z1r, z1l, 30) -- z2l -- z2r -- cycle;
+ z1 = (0, 2 staff_space)
+ + center
+ - (0, stafflinethickness / 2 + clearing);
+ z2 = (0, -1/2 staff_space - stafflinethickness / 2)
+ + center;
+ penpos1 (top_stem_thick, 0);
+ penpos2 (bottom_stem_thick, 0);
y3l = (staff_space - stafflinethickness) / 2 + ypart center;
- z3l = whatever [z2r,z1r];
-
+ z3l = whatever [z2r, z1r];
z3r = .3 [z2r, z1r] + (smaller_hole, 0);
- z10 = whatever [z2r, z1r] + (smaller_hole , 0);
- z11 = center + (bottom_overshoot/3,
- -staff_space/2 - stafflinethickness/2) - (0,bottom_overshoot);
+ % we insert z3l to get better conversion with mf2pt1
+ fill simple_serif (z1r, z1l, 30)
+ -- z2l
+ -- z2r
+ -- z3l
+ -- cycle;
- penpos4(whatever, 53);
+ z10 = whatever [z2r, z1r] + (smaller_hole, 0);
+ z11 = center
+ + (bottom_overshoot / 3,
+ -staff_space / 2 - stafflinethickness / 2)
+ - (0, bottom_overshoot);
- y4l - y4r = top_crook_thinness ;
+ penpos4 (whatever, 53);
+ y4l - y4r = top_crook_thinness;
y5r = .15 staff_space + ypart center;
x5l = w + xpart center;
- y4 = ypart center + staff_space/2;
+ y4 = ypart center + staff_space / 2;
x4r = .45 [x5r, x3r];
- penpos5(crook_fatness, -175);
+ penpos5 (crook_fatness, -175);
- save bot_crook_dir ;
- pair bot_crook_dir ;
- bot_crook_dir = unitvector ((x5l,0) - z11);
- z8 = z11 + whatever * bot_crook_dir;
- y8 = - staff_space /2 +0.0* stafflinethickness;
-
- z7 = z8 + whatever * bot_crook_dir + crook_thinness * (bot_crook_dir rotated 90);
+ save bot_crook_dir;
+ pair bot_crook_dir;
+ bot_crook_dir = unitvector ((x5l, 0) - z11);
+ z8 = z11 + whatever * bot_crook_dir;
+ y8 = -staff_space / 2 + 0.0 * stafflinethickness;
+ z7 = z8
+ + whatever * bot_crook_dir
+ + crook_thinness * (bot_crook_dir rotated 90);
x7 = .1 [x3r, x8];
- penlabels(range 0 thru 10);
+ penlabels (range 0 thru 11);
y10 = -1/10 staff_space;
% draw_staff (-2, 2, 0.5);
% draw_staff (-2, 2, 0.0);
- unfill z3r{z3r-z10} .. z4r{right} .. z5r{down}
- .. z7{- bot_crook_dir}
- & z7 % .. tension 1.3
- .. z10{z3r-z10}
+ unfill z3r{z3r - z10}
+ .. z4r{right}
+ .. z5r{down}
+ .. z7{-bot_crook_dir}
+ & z7
+ .. z10{z3r - z10}
+ -- cycle;
- -- cycle;
fill z2l{down}
-
- .. z11{right}
- .. z8{bot_crook_dir}
- .. z5l{up}
- .. z4l{left} .. z3l -- cycle;
-
- labels(10);
+ .. z11{right}
+ .. z8{bot_crook_dir}
+ .. z5l{up}
+ .. z4l{left}
+ .. z3l
+ -- cycle;
enddef;
-
+
%
% unfortunately, 600dpi is not enough to show the brush of the stem.
%
-fet_beginchar("Flat", "-2")
- set_char_box(1.2 stafflinethickness#, .8 staff_space#, 0.6 staff_space#, 1.9 staff_space#);
- draw_meta_flat(0, w, 0.31 staff_space);
- fet_endchar;
-fet_beginchar("Semi flat", "-1")
- set_char_box(1.2 stafflinethickness#, .8 staff_space#, 0.6 staff_space#, 1.9 staff_space#);
+fet_beginchar ("Flat", "-2")
+ set_char_box (1.2 stafflinethickness#, .8 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
+ draw_meta_flat (0, w, 0.31 staff_space);
+fet_endchar;
+
+
+fet_beginchar ("Semi flat", "-1")
+ set_char_box (1.2 stafflinethickness#, .8 staff_space#,
+ 0.6 staff_space#, 1.9 staff_space#);
draw_meta_flat(0, w, 0.31 staff_space);
- currentpicture := currentpicture xscaled -1 shifted (w - b, 0);
- fet_endchar;
+ currentpicture := currentpicture xscaled -1 shifted (w - b, 0);
+fet_endchar;
-fet_beginchar("Double Flat", "-4")
+fet_beginchar ("Double Flat", "-4")
save left_wid, overlap, right_wid;
left_wid = .7;
right_wid = .8;
overlap = .05;
- set_char_box(1.2 stafflinethickness#, (left_wid + right_wid -overlap) *staff_space#, .6 staff_space#, 1.9 staff_space#);
- draw_meta_flat(0, left_wid* staff_space, 1/3 staff_space);
- draw_meta_flat(round ((left_wid - overlap) *staff_space),
- right_wid *staff_space, 0.33 staff_space);
- fet_endchar;
-fet_beginchar("3/4 Flat", "-3")
+ set_char_box (1.2 stafflinethickness#,
+ (left_wid + right_wid -overlap) * staff_space#,
+ .6 staff_space#, 1.9 staff_space#);
+ draw_meta_flat (0, left_wid * staff_space, 1/3 staff_space);
+ draw_meta_flat (round ((left_wid - overlap) * staff_space),
+ right_wid * staff_space, 0.33 staff_space);
+fet_endchar;
+
+
+fet_beginchar ("3/4 Flat", "-3")
save left_wid, overlap, right_wid;
left_wid = .7;
right_wid = .8;
overlap = .05;
- set_char_box(1.2 stafflinethickness#, (left_wid + right_wid -overlap) *staff_space#, .6 staff_space#, 1.9 staff_space#);
- draw_meta_flat(0, left_wid* staff_space, 1/3 staff_space);
- draw_meta_flat(round ((left_wid - overlap) *staff_space),
- right_wid *staff_space, 0.33 staff_space);
+
+ set_char_box (1.2 stafflinethickness#,
+ (left_wid + right_wid - overlap) * staff_space#,
+ .6 staff_space#, 1.9 staff_space#);
+ draw_meta_flat (0, left_wid * staff_space, 1/3 staff_space);
+ draw_meta_flat (round ((left_wid - overlap) * staff_space),
+ right_wid * staff_space, 0.33 staff_space);
%% maybe we should clip part of the stems?
%% or make the 1st flat smaller?
- %% or reverse it?
+ %% or reverse it?
pickup pencircle scaled 2 stafflinethickness;
- z12 = ( - .25 w - b, .55 staff_space);
- z13 = ( .75 w , 1.45 staff_space);
- draw z12 -- z13;
- fet_endchar;
+ z12 = (-.25 w - b, .55 staff_space);
+ z13 = (.75 w, 1.45 staff_space);
+ penpos12 (2 stafflinethickness, angle (z13 - z12) - 90);
+ penpos13 (2 stafflinethickness, angle (z13 - z12) - 90);
+ z14 = z12 - stafflinethickness * unitvector (z13 - z12);
+ z15 = z13 + stafflinethickness * unitvector (z13 - z12);
+
+ fill z13r
+ .. z15
+ .. z13l
+ --- z12l
+ .. z14
+ .. z12 r
+ --- z13r
+ .. cycle;
+
+ penlabels (12, 13);
+ labels (14, 15);
+fet_endchar;
-fet_beginchar("Double Sharp", "4")
- set_char_box(0, staff_space#, .5 staff_space#, .5 staff_space#);
+fet_beginchar ("Double Sharp", "4")
+ set_char_box (0, staff_space#, .5 staff_space#, .5 staff_space#);
save klaverblad, klaversteel;
klaversteel = 1/15 staff_space;
klaverblad = .40 staff_space - .5 stafflinethickness;
z1 = (klaversteel, 0);
- z2 = (w/2 - klaverblad / 10, h - klaverblad);
- z3 = (w/2, h);
- z4 = z2 reflectedabout((0,0), (1,1));
- z5 = z1 reflectedabout((0,0), (1,1));
+ z2 = (w / 2 - klaverblad / 10, h - klaverblad);
+ z3 = (w / 2, h);
+ z4 = z2 reflectedabout ((0, 0), (1, 1));
+ z5 = z1 reflectedabout ((0, 0), (1, 1));
- labels(1,2,3,4,5);
- pickup pencircle scaled blot_diameter;
- filldraw
- z1{dir 45} .. {right}z2 -- z3 --
- z4{down} .. {dir 225}z5 .. cycle;
-
-
- addto currentpicture also currentpicture yscaled (-d/h);
- addto currentpicture also currentpicture xscaled (-1);
-
- % ugh
- currentpicture := currentpicture shifted (w/2,0);
+ labels (1, 2, 3, 4, 5);
+ save pat;
+ path pat;
+ pickup pencircle scaled blot_diameter;
+ pat = (rt z1){dir45}
+ .. {right}(bot z2)
+ .. rt z2
+ --- rt z3
+ .. top z3
+ --- top z4
+ .. (lft z4){down}
+ .. {dir 225}(top z5);
+ pat := pat
+ & reverse pat xscaled (-1);
+ pat := pat
+ & reverse pat yscaled (-d / h)
+ -- cycle;
+ fill pat;
+ % ugh
+ currentpicture := currentpicture shifted (w / 2, 0);
fet_endchar;
def draw_paren =
- save leftindent;
+ save leftindent;
leftindent# := .2 staff_space#;
- define_pixels(leftindent);
- set_char_box(0, .5 staff_space#+stafflinethickness#,
- staff_space#, staff_space#);
- z1 = (leftindent,h);
- z2 = (w-stafflinethickness,0);
- z3 = (leftindent,-d);
-
- penpos1(stafflinethickness, 35);
- penpos2(.1 staff_space + stafflinethickness, 0);
- penpos3(stafflinethickness, -35);
-
- penlabels(1,2,3);
- fill z2l{down} .. simple_serif(z3l, z3r, 90) .. z2r{up}
- .. simple_serif(z1r, z1l, 90) .. z2l{down} -- cycle;
+ define_pixels (leftindent);
+
+ set_char_box (0, .5 staff_space# + stafflinethickness#,
+ staff_space#, staff_space#);
+
+ z1 = (leftindent, h);
+ z2 = (w - stafflinethickness, 0);
+ z3 = (leftindent, -d);
+
+ penpos1 (stafflinethickness, 35);
+ penpos2 (.1 staff_space + stafflinethickness, 0);
+ penpos3 (stafflinethickness, -35);
+
+ penlabels (1, 2, 3);
+
+ fill z2l{down}
+ .. simple_serif (z3l, z3r, 90)
+ .. z2r{up}
+ .. simple_serif (z1r, z1l, 90)
+ .. z2l{down}
+ -- cycle;
enddef;
-
-fet_beginchar("Right Parenthesis", "rightparen")
+
+
+fet_beginchar ("Right Parenthesis", "rightparen")
draw_paren;
fet_endchar;
-fet_beginchar("Left Parenthesis", "leftparen")
+
+fet_beginchar ("Left Parenthesis", "leftparen")
draw_paren;
- currentpicture := currentpicture xscaled -1;
- set_char_box(charwd, charbp, chardp, charht);
+ currentpicture := currentpicture xscaled -1;
+ set_char_box (charwd, charbp, chardp, charht);
fet_endchar;
-fet_endgroup("accidentals");
+fet_endgroup ("accidentals");
projects / lilypond.git / commitdiff